Skip to contentSkip to conversation

5.10.48-rc1 review

PATCH In review Sasha Levin 9 participants 19 messages Jul 5, 2021 – Jul 7, 2021

Subsystems (2)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

cover 5.10.48-rc1 review

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 07 Jul 2021 10:59:49 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.47

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Thanks,
Sasha

-------------
Pseudo-Shortlog of commits:

Christian König (1):
drm/nouveau: fix dma_address check for CPU/GPU sync

Johannes Berg (1):
gpio: AMD8111 and TQMX86 require HAS_IOPORT_MAP

Loic Poulain (1):
gpio: mxc: Fix disabled interrupt wake-up support

ManYi Li (1):
scsi: sr: Return appropriate error code when disk is ejected

Mark Bloch (1):
RDMA/mlx5: Block FDB rules when not in switchdev mode

Sasha Levin (1):
Linux 5.10.48-rc1

Sean Christopherson (1):
Revert "KVM: x86/mmu: Drop kvm_mmu_extended_role.cr4_la57 hack"

 Makefile                             | 4 ++--
 arch/x86/include/asm/kvm_host.h      | 1 +
 arch/x86/kvm/mmu/mmu.c               | 1 +
 drivers/gpio/Kconfig                 | 2 ++
 drivers/gpio/gpio-mxc.c              | 2 +-
 drivers/gpu/drm/nouveau/nouveau_bo.c | 4 ++--
 drivers/infiniband/hw/mlx5/fs.c      | 7 +++++++
 drivers/scsi/sr.c                    | 2 ++
 8 files changed, 18 insertions(+), 5 deletions(-)
Signature · 1 line
2.30.2
author maintainer
#1 lore raw

PATCH 1/7 scsi: sr: Return appropriate error code when disk is ejected

From: ManYi Li <[email protected]>

[ Upstream commit 7dd753ca59d6c8cc09aa1ed24f7657524803c7f3 ]

Handle a reported media event code of 3. This indicates that the media has been removed from the drive and user intervention is required to proceed. Return DISK_EVENT_EJECT_REQUEST in that case.

---
 drivers/scsi/sr.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/scsi/sr.c +2 -0
index fd4b582110b2..77961f058367 100644
@@ -220,6 +220,8 @@ static unsigned int sr_get_events(struct scsi_device *sdev)
 		return DISK_EVENT_EJECT_REQUEST;
 	else if (med->media_event_code == 2)
 		return DISK_EVENT_MEDIA_CHANGE;
+	else if (med->media_event_code == 3)
+		return DISK_EVENT_EJECT_REQUEST;
 	return 0;
 }
 
Signature · 1 line
2.30.2
author maintainer
#2 lore raw

PATCH 2/7 gpio: mxc: Fix disabled interrupt wake-up support

In reply to Sasha Levin

From: Loic Poulain <[email protected]>

[ Upstream commit 3093e6cca3ba7d47848068cb256c489675125181 ]

A disabled/masked interrupt marked as wakeup source must be re-enable and unmasked in order to be able to wake-up the host. That can be done by flaging the irqchip with IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND.

Note: It 'sometimes' works without that change, but only thanks to the lazy generic interrupt disabling (keeping interrupt unmasked).

---
 drivers/gpio/gpio-mxc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpio/gpio-mxc.c +1 -1
index 643f4c557ac2..ba6ed2a413f5 100644
@@ -361,7 +361,7 @@ static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 	ct->chip.irq_set_type = gpio_set_irq_type;
 	ct->chip.irq_set_wake = gpio_set_wake_irq;
-	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND;
+	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND;
 	ct->regs.ack = GPIO_ISR;
 	ct->regs.mask = GPIO_IMR;
 
Signature · 1 line
2.30.2
author maintainer
#3 lore raw

PATCH 3/7 drm/nouveau: fix dma_address check for CPU/GPU sync

In reply to Sasha Levin

From: Christian König <[email protected]>

[ Upstream commit d330099115597bbc238d6758a4930e72b49ea9ba ]

AGP for example doesn't have a dma_address array.

---
 drivers/gpu/drm/nouveau/nouveau_bo.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/nouveau/nouveau_bo.c +2 -2
index 7daa12eec01b..b4946b595d86 100644
@@ -590,7 +590,7 @@ nouveau_bo_sync_for_device(struct nouveau_bo *nvbo)
 	struct ttm_dma_tt *ttm_dma = (struct ttm_dma_tt *)nvbo->bo.ttm;
 	int i;
 
-	if (!ttm_dma)
+	if (!ttm_dma || !ttm_dma->dma_address)
 		return;
 
 	/* Don't waste time looping if the object is coherent */
@@ -610,7 +610,7 @@ nouveau_bo_sync_for_cpu(struct nouveau_bo *nvbo)
 	struct ttm_dma_tt *ttm_dma = (struct ttm_dma_tt *)nvbo->bo.ttm;
 	int i;
 
-	if (!ttm_dma)
+	if (!ttm_dma || !ttm_dma->dma_address)
 		return;
 
 	/* Don't waste time looping if the object is coherent */
Signature · 1 line
2.30.2
author maintainer
#4 lore raw

PATCH 4/7 gpio: AMD8111 and TQMX86 require HAS_IOPORT_MAP

In reply to Sasha Levin

From: Johannes Berg <[email protected]>

[ Upstream commit c6414e1a2bd26b0071e2b9d6034621f705dfd4c0 ]

Both of these drivers use ioport_map(), so they need to depend on HAS_IOPORT_MAP. Otherwise, they cannot be built even with COMPILE_TEST on architectures without an ioport implementation, such as ARCH=um.

---
 drivers/gpio/Kconfig | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpio/Kconfig +2 -0
index 14751c7ccd1f..d1300fc003ed 100644
@@ -1337,6 +1337,7 @@ config GPIO_TPS68470
 config GPIO_TQMX86
 	tristate "TQ-Systems QTMX86 GPIO"
 	depends on MFD_TQMX86 || COMPILE_TEST
+	depends on HAS_IOPORT_MAP
 	select GPIOLIB_IRQCHIP
 	help
 	  This driver supports GPIO on the TQMX86 IO controller.
@@ -1404,6 +1405,7 @@ menu "PCI GPIO expanders"
 config GPIO_AMD8111
 	tristate "AMD 8111 GPIO driver"
 	depends on X86 || COMPILE_TEST
+	depends on HAS_IOPORT_MAP
 	help
 	  The AMD 8111 south bridge contains 32 GPIO pins which can be used.
 
Signature · 1 line
2.30.2
author maintainer
#5 lore raw

PATCH 5/7 RDMA/mlx5: Block FDB rules when not in switchdev mode

In reply to Sasha Levin

From: Mark Bloch <[email protected]>

commit edc0b0bccc9c80d9a44d3002dcca94984b25e7cf upstream.

Allow creating FDB steering rules only when in switchdev mode.

The only software model where a userspace application can manipulate FDB entries is when it manages the eswitch. This is only possible in switchdev mode where we expose a single RDMA device with representors for all the vports that are connected to the eswitch.

---
 drivers/infiniband/hw/mlx5/fs.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/infiniband/hw/mlx5/fs.c +7 -0
index 13d50b178166..b3391ecedda7 100644
@@ -2136,6 +2136,13 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_FLOW_MATCHER_CREATE)(
 	if (err)
 		goto end;
 
+	if (obj->ns_type == MLX5_FLOW_NAMESPACE_FDB &&
+	    mlx5_eswitch_mode(dev->mdev->priv.eswitch) !=
+			      MLX5_ESWITCH_OFFLOADS) {
+		err = -EINVAL;
+		goto end;
+	}
+
 	uobj->object = obj;
 	obj->mdev = dev->mdev;
 	atomic_set(&obj->usecnt, 0);
Signature · 1 line
2.30.2
author maintainer
#6 lore raw

PATCH 6/7 Revert "KVM: x86/mmu: Drop kvm_mmu_extended_role.cr4_la57 hack"

In reply to Sasha Levin

From: Sean Christopherson <[email protected]>

commit f71a53d1180d5ecc346f0c6a23191d837fe2871b upstream.

Restore CR4.LA57 to the mmu_role to fix an amusing edge case with nested virtualization. When KVM (L0) is using TDP, CR4.LA57 is not reflected in mmu_role.base.level because that tracks the shadow root level, i.e. TDP level. Normally, this is not an issue because LA57 can't be toggled while long mode is active, i.e. the guest has to first disable paging, then toggle LA57, then re-enable paging, thus ensuring an MMU reinitialization.

But if L1 is crafty, it can load a new CR4 on VM-Exit and toggle LA57 without having to bounce through an unpaged section. L1 can also load a new CR3 on exit, i.e. it doesn't even need to play crazy paging games, a single entry PML5 is sufficient. Such shenanigans are only problematic if L0 and L1 use TDP, otherwise L1 and L2 share an MMU that gets reinitialized on nested VM-Enter/VM-Exit due to mmu_role.base.guest_mode.

Note, in the L2 case with nested TDP, even though L1 can switch between L2s with different LA57 settings, thus bypassing the paging requirement, in that case KVM's nested_mmu will track LA57 in base.level.

This reverts commit 8053f924cad30bf9f9a24e02b6c8ddfabf5202ea.

Fixes 8053f924cad3 ("KVM: x86/mmu: Drop kvm_mmu_extended_role.cr4_la57 hack")

Message-Id: <[email protected]>

---
 arch/x86/include/asm/kvm_host.h | 1 +
 arch/x86/kvm/mmu/mmu.c          | 1 +
 2 files changed, 2 insertions(+)
arch/x86/include/asm/kvm_host.h +1 -0
index ef56780022c3..d1ac2de41ea8 100644
@@ -296,6 +296,7 @@ union kvm_mmu_extended_role {
 		unsigned int cr4_pke:1;
 		unsigned int cr4_smap:1;
 		unsigned int cr4_smep:1;
+		unsigned int cr4_la57:1;
 		unsigned int maxphyaddr:6;
 	};
 };
arch/x86/kvm/mmu/mmu.c +1 -0
index 6b794344c02d..f2eeaf197294 100644
@@ -4442,6 +4442,7 @@ static union kvm_mmu_extended_role kvm_calc_mmu_role_ext(struct kvm_vcpu *vcpu)
 	ext.cr4_smap = !!kvm_read_cr4_bits(vcpu, X86_CR4_SMAP);
 	ext.cr4_pse = !!is_pse(vcpu);
 	ext.cr4_pke = !!kvm_read_cr4_bits(vcpu, X86_CR4_PKE);
+	ext.cr4_la57 = !!kvm_read_cr4_bits(vcpu, X86_CR4_LA57);
 	ext.maxphyaddr = cpuid_maxphyaddr(vcpu);
 
 	ext.valid = 1;
Signature · 1 line
2.30.2
author maintainer
#7 lore raw

PATCH 7/7 Linux 5.10.48-rc1

In reply to Sasha Levin
---
 Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Makefile +2 -2
index fb2937bca41b..d07aea32e4fd 100644
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 47
-EXTRAVERSION =
+SUBLEVEL = 48
+EXTRAVERSION = -rc1
 NAME = Dare mighty things
 
 # *DOCUMENTATION*
Signature · 1 line
2.30.2
Tested-by on the v1 series
#8 lore raw
In reply to Sasha Levin
Quoted 9 lines · Sasha Levin

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 07 Jul 2021 10:59:49 AM UTC. Anything received after that time might be too late.

Quoted 9 lines

The whole patch series can be found in one patch at:

        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.47

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Thanks,
Sasha

5.10.48-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)

Tested-by on the v1 series
#9 lore raw
In reply to Sasha Levin

Hi!

Quoted 4 lines

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
author maintainer
#10 lore raw
Quoted 7 lines · Pavel Machek

Hi!

Quoted 4 lines

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 5 lines

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Thanks for testing Pavel!

Signature · 2 lines
Thanks,
Sasha
maintainer Tested-by on the v1 series
#11 lore raw
In reply to Sasha Levin
Quoted 9 lines · Sasha Levin

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 07 Jul 2021 10:59:49 AM UTC. Anything received after that time might be too late.

Quoted 8 lines

The whole patch series can be found in one patch at:

        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.47

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Thanks,
Sasha

All tests passing for Tegra ...

Test results for stable-v5.10:

    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    70 tests:	70 pass, 0 fail

Linux version: 5.10.48-rc1-gdd50b7327ff6
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Tested-by on the v1 series
#12 lore raw
In reply to Sasha Levin
Quoted 9 lines · Sasha Levin

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 07 Jul 2021 10:59:49 AM UTC. Anything received after that time might be too late.

Build results:

	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 455 pass: 455 fail: 0

Guenter

Tested-by Hulk Robot on the v1 series
#13 lore raw
In reply to Sasha Levin
Quoted 9 lines · Sasha Levin

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 07 Jul 2021 10:59:49 AM UTC. Anything received after that time might be too late.

Quoted 9 lines

The whole patch series can be found in one patch at:

         https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.47

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Thanks,
Sasha

Tested on arm64 and x86 for 5.10.48-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.48-rc1
Commit: dd50b7327ff62c603651aef64089569dd293b34d
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------

author maintainer
#14 lore raw
Quoted 49 lines · Samuel Zou
Quoted 9 lines · Sasha Levin

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 07 Jul 2021 10:59:49 AM UTC. Anything received after that time might be too late.

Quoted 9 lines

The whole patch series can be found in one patch at:

        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.47

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Thanks,
Sasha

Tested on arm64 and x86 for 5.10.48-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.48-rc1
Commit: dd50b7327ff62c603651aef64089569dd293b34d
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------

Quoted 1 line

Thanks for testing Samuel!

Signature · 2 lines
Thanks,
Sasha
Tested-by Linux Kernel Functional Testing on the v1 series
#15 lore raw
In reply to Sasha Levin
Quoted 10 lines · Sasha Levin

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 07 Jul 2021 10:59:49 AM UTC. Anything received after that time might be too late.

Quoted 9 lines

The whole patch series can be found in one patch at:

        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.47

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Thanks,
Sasha

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 5.10.48-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: dd50b7327ff62c603651aef64089569dd293b34d
* git describe: v5.10.47-7-gdd50b7327ff6
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.47-7-gdd50b7327ff6

## No regressions (compared to v5.10.47)

## No fixes (compared to v5.10.47)

## Test result summary
total: 76152, pass: 63402, fail: 1638, skip: 10082, xfail: 1030,

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 193 total, 193 passed, 0 failed
* arm64: 27 total, 27 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 26 total, 26 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 27 total, 27 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Tested-by on the v1 series
#16 lore raw
In reply to Sasha Levin

Hi Sasha,

Quoted 8 lines · Sasha Levin

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 07 Jul 2021 10:59:49 AM UTC. Anything received after that time might be too late.

Build test:
mips (gcc version 11.1.1 20210702): 63 configs -> no failure arm (gcc version 11.1.1 20210702): 105 configs -> no new failure arm64 (gcc version 11.1.1 20210702): 3 configs -> no failure x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.
arm64: Booted on rpi4b (4GB model). No regression.

--
Regards
Sudip

author maintainer
#17 lore raw
Quoted 18 lines · Sudip Mukherjee

Hi Sasha,

Quoted 8 lines · Sasha Levin

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 07 Jul 2021 10:59:49 AM UTC. Anything received after that time might be too late.

Build test:
mips (gcc version 11.1.1 20210702): 63 configs -> no failure arm (gcc version 11.1.1 20210702): 105 configs -> no new failure arm64 (gcc version 11.1.1 20210702): 3 configs -> no failure x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure

Quoted 6 lines

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.
arm64: Booted on rpi4b (4GB model). No regression.

Thanks for testing Sudip!

Signature · 2 lines
Thanks,
Sasha
Tested-by on the v1 series
#18 lore raw
In reply to Sasha Levin
Quoted 9 lines · Sasha Levin

This is the start of the stable review cycle for the 5.10.48 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 07 Jul 2021 10:59:49 AM UTC. Anything received after that time might be too late.

Quoted 9 lines

The whole patch series can be found in one patch at:

         https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.47

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Thanks,
Sasha

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah