recipes-bsp: u-boot-ti-mainline: Update to v2021.07 release
PATCH v2 1/1 recipes-bsp: u-boot-ti-mainline: Update to v2021.07 release
Update u-boot recipe to be on the latest official upstream tag.
This introduces initial support for AM64x which works with v5.13 kernel tag.
---
Changes since v1:
* commit message update to state it is the latest official upstream tag instead of using "bleeding" which is misleading.
* Picked up Reviewed-by from v1
V1: https://lists.yoctoproject.org/g/meta-ti/topic/84023012#13896
recipes-bsp/u-boot/u-boot-ti-mainline_git.bb | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
recipes-bsp/u-boot/u-boot-ti-mainline_git.bb +2 -2
@@ -4,7 +4,7 @@ LIC_FILES_CHKSUM = "file://Licenses/README;md5=5a7450c57ffe5ae63fd732446b988025" PR = "r0" -PV = "2021.04" +PV = "2021.07" # For the un-initiated: # The actual URL you'd use with a git clone for example would be:
@@ -15,4 +15,4 @@ PV = "2021.04" # b) and we want git fetcher to use https protocol, hence GIT_PROTOCOL as https UBOOT_GIT_URI = "git://source.denx.de/u-boot/u-boot.git" UBOOT_GIT_PROTOCOL = "https" -SRCREV = "b46dd116ce03e235f2a7d4843c6278e1da44b5e1" +SRCREV = "840658b093976390e9537724f802281c9c8439f5"
Signature · 1 line
2.32.0
Quoted 5 lines · Nishanth Menon via lists.yoctoproject.org
Update u-boot recipe to be on the latest official upstream tag.
This introduces initial support for AM64x which works with v5.13 kernel tag.
Quoted 8 lines
Reviewed-by Denys Dmytriyenko <[email protected]>Reviewed-by Tom Rini <[email protected]>Signed-off-by Nishanth Menon <[email protected]>---
Changes since v1:
* commit message update to state it is the latest official upstream tag instead of using "bleeding" which is misleading.
Thanks!
Quoted 29 lines
* Picked up Reviewed-by from v1
V1: https://lists.yoctoproject.org/g/meta-ti/topic/84023012#13896
recipes-bsp/u-boot/u-boot-ti-mainline_git.bb | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)recipes-bsp/u-boot/u-boot-ti-mainline_git.bb +2
-2@@ -4,7 +4,7 @@ LIC_FILES_CHKSUM = "file://Licenses/README;md5=5a7450c57ffe5ae63fd732446b988025" PR = "r0" -PV = "2021.04" +PV = "2021.07" # For the un-initiated: # The actual URL you'd use with a git clone for example would be:@@ -15,4 +15,4 @@ PV = "2021.04" # b) and we want git fetcher to use https protocol, hence GIT_PROTOCOL as https UBOOT_GIT_URI = "git://source.denx.de/u-boot/u-boot.git" UBOOT_GIT_PROTOCOL = "https" -SRCREV = "b46dd116ce03e235f2a7d4843c6278e1da44b5e1" +SRCREV = "840658b093976390e9537724f802281c9c8439f5"Signature · 1 line
2.32.0
Signature · 4 lines
Regards, Denys Dmytriyenko <[email protected]> PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964 Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964