Skip to contentSkip to conversation

tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests

RFC PATCH In review Vidya Srinivas 8 participants 97 messages Jun 1, 2021 – Jul 14, 2021 Page 1 of 2

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests

Few Gen11 systems show CRC mismatch. Make coverage-vs-premult-vs-constant code similar to constant_alpha_min or basic_alpha

---
 tests/kms_plane_alpha_blend.c | 4 ----
 1 file changed, 4 deletions(-)
tests/kms_plane_alpha_blend.c +0 -4
index a37cb27c7d62..224d79bd1749 100644
@@ -447,10 +447,6 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
 
-	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
-
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#1 lore raw
Quoted 6 lines · Vidya Srinivas

tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests

Few Gen11 systems show CRC mismatch. Make coverage-vs-premult-vs-constant code similar to constant_alpha_min or basic_alpha

Please make the first line of the commit message a statement that tells what change you're making, and in the full text block state why that's done. "Fix a-b-c tests" is useless later when browsing oneliner git logs. It doesn't even tell which problem is fixed.

Meaning, something like:

==
tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Similar change has already been done in tests xxx and yyy. This fixes CRC mismatches seen with some Gen11 systems.

Signed-off-by etc
==

Signature · 5 lines
Petri Latvala
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

Thank you so much Petri. Apologies for the incorrect commit message. I will submit the patch with the clear commit message.

Regards
Vidya

-----Original Message-----
From: Latvala, Petri <[email protected]>
Sent: Tuesday, June 1, 2021 7:11 PM
To: Srinivas, Vidya <[email protected]>
Cc: [email protected]; [email protected]
Subject: Re: [igt-dev] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests

Quoted 7 lines · Vidya Srinivas

tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests

Few Gen11 systems show CRC mismatch. Make coverage-vs-premult-vs-constant code similar to constant_alpha_min or basic_alpha

Please make the first line of the commit message a statement that tells what change you're making, and in the full text block state why that's done. "Fix a-b-c tests" is useless later when browsing oneliner git logs. It doesn't even tell which problem is fixed.

Meaning, something like:

==
tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Similar change has already been done in tests xxx and yyy. This fixes CRC mismatches seen with some Gen11 systems.

Signed-off-by etc
==

--
Petri Latvala
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

RFC PATCH 1/1 tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

In reply to Vidya Srinivas

Patch removes setting primary fb color in coverage-vs-premult-vs-constant as this is causing CRC mismatch on few Gen11 systems.
Similar change has already been done in tests constant_alpha_min and basic_alpha where the test runs on all planes but dont set the primary fb color.

---
 tests/kms_plane_alpha_blend.c | 4 ----
 1 file changed, 4 deletions(-)
tests/kms_plane_alpha_blend.c +0 -4
index a37cb27c7d62..224d79bd1749 100644
@@ -447,10 +447,6 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
 
-	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
-
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

Re: [igt-dev] [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Quoted 9 lines

From: Intel-gfx <[email protected]> On Behalf Of Vidya Srinivas
Sent: Tuesday, June 1, 2021 7:38 PM
To: [email protected]; [email protected]
Subject: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Patch removes setting primary fb color in coverage-vs-premult-vs-constant as this is causing CRC mismatch on few Gen11 systems.

I am not sure how Primary plane's bg color causing CRC mismatch. Also, as this test runs on all planes (those are having the props "alpha" and "pixel blend mode"), is this test failing on a particular plane?

- Bhanu

Quoted 29 lines

Similar change has already been done in tests constant_alpha_min and basic_alpha
where the test runs on all planes but dont set the primary fb color.

---
 tests/kms_plane_alpha_blend.c | 4 ----
 1 file changed, 4 deletions(-)
tests/kms_plane_alpha_blend.c +0 -0
index a37cb27c7d62..224d79bd1749 100644
@@ -447,10 +447,6 @@ static void coverage_premult_constant(data_t *data, enum

pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +0 -3
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
 
-	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],

DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);

tests/kms_plane_alpha_blend.c +0 -2
-
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
--

2.7.4

Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#5 lore raw

Re: [igt-dev] [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Thank you Bhanu. This test is failing on all planes > 0. Only plane 0 passes.
If I skip plane 1, it fails on 2 and so on.
Changing the way CRC is being collected also is not helping. Adding vblank is also not helping.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Friday, June 11, 2021 9:11 AM
To: Srinivas, Vidya <[email protected]>; [email protected]; [email protected]
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Quoted 9 lines

From: Intel-gfx <[email protected]> On Behalf Of Vidya Srinivas
Sent: Tuesday, June 1, 2021 7:38 PM
To: [email protected]; [email protected]
Subject: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend:
Don't set primary fb color in coverage-vs-premult-vs-constant

Patch removes setting primary fb color in coverage-vs-premult-vs-constant as this is causing CRC mismatch on few Gen11 systems.

I am not sure how Primary plane's bg color causing CRC mismatch.
Also, as this test runs on all planes (those are having the props "alpha" and "pixel blend mode"), is this test failing on a particular plane?

- Bhanu

Quoted 30 lines

Similar change has already been done in tests constant_alpha_min and basic_alpha where the test runs on all planes but dont set the primary fb color.

---
 tests/kms_plane_alpha_blend.c | 4 ----
 1 file changed, 4 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..224d79bd1749 100644

tests/kms_plane_alpha_blend.c +0 -4
@@ -447,10 +447,6 @@ static void coverage_premult_constant(data_t 
 *data, enum pipe pipe, igt_plane_t
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
 
-	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
-
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
tests/kms_plane_alpha_blend.c +0 -1
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
--

2.7.4

Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#6 lore raw

Re: [igt-dev] [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Hello Bhanu,

I have uploaded version 3 where I have not removed primary plane. Instead I have added a commit of the primary plane and I have changed alpha. This passes on Gen11 systems.

Kindly check https://patchwork.freedesktop.org/patch/438831/?series=90828&rev=3 and suggest.

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 11, 2021 1:00 PM
To: Modem, Bhanuprakash <[email protected]>; [email protected]; [email protected]
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Thank you Bhanu. This test is failing on all planes > 0. Only plane 0 passes.
If I skip plane 1, it fails on 2 and so on.
Changing the way CRC is being collected also is not helping. Adding vblank is also not helping.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Friday, June 11, 2021 9:11 AM
To: Srinivas, Vidya <[email protected]>; [email protected]; [email protected]
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Quoted 9 lines

From: Intel-gfx <[email protected]> On Behalf Of Vidya Srinivas
Sent: Tuesday, June 1, 2021 7:38 PM
To: [email protected]; [email protected]
Subject: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend:
Don't set primary fb color in coverage-vs-premult-vs-constant

Patch removes setting primary fb color in coverage-vs-premult-vs-constant as this is causing CRC mismatch on few Gen11 systems.

I am not sure how Primary plane's bg color causing CRC mismatch.
Also, as this test runs on all planes (those are having the props "alpha" and "pixel blend mode"), is this test failing on a particular plane?

- Bhanu

Quoted 30 lines

Similar change has already been done in tests constant_alpha_min and basic_alpha where the test runs on all planes but dont set the primary fb color.

---
 tests/kms_plane_alpha_blend.c | 4 ----
 1 file changed, 4 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..224d79bd1749 100644

tests/kms_plane_alpha_blend.c +0 -4
@@ -447,10 +447,6 @@ static void coverage_premult_constant(data_t 
 *data, enum pipe pipe, igt_plane_t
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
 
-	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
-
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
tests/kms_plane_alpha_blend.c +0 -1
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
--

2.7.4

Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#7 lore raw

Re: [igt-dev] [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Hello Bhanu,

Sorry for the trouble. Kindly can you check if rev 3 is okay? Thanks a lot.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 11, 2021 6:28 PM
To: Modem, Bhanuprakash <[email protected]>; [email protected]; [email protected]
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Hello Bhanu,

I have uploaded version 3 where I have not removed primary plane. Instead I have added a commit of the primary plane and I have changed alpha. This passes on Gen11 systems.

Kindly check https://patchwork.freedesktop.org/patch/438831/?series=90828&rev=3 and suggest.

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 11, 2021 1:00 PM
To: Modem, Bhanuprakash <[email protected]>; [email protected]; [email protected]
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Thank you Bhanu. This test is failing on all planes > 0. Only plane 0 passes.
If I skip plane 1, it fails on 2 and so on.
Changing the way CRC is being collected also is not helping. Adding vblank is also not helping.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Friday, June 11, 2021 9:11 AM
To: Srinivas, Vidya <[email protected]>; [email protected]; [email protected]
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Quoted 9 lines

From: Intel-gfx <[email protected]> On Behalf Of Vidya Srinivas
Sent: Tuesday, June 1, 2021 7:38 PM
To: [email protected]; [email protected]
Subject: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend:
Don't set primary fb color in coverage-vs-premult-vs-constant

Patch removes setting primary fb color in coverage-vs-premult-vs-constant as this is causing CRC mismatch on few Gen11 systems.

I am not sure how Primary plane's bg color causing CRC mismatch.
Also, as this test runs on all planes (those are having the props "alpha" and "pixel blend mode"), is this test failing on a particular plane?

- Bhanu

Quoted 30 lines

Similar change has already been done in tests constant_alpha_min and basic_alpha where the test runs on all planes but dont set the primary fb color.

---
 tests/kms_plane_alpha_blend.c | 4 ----
 1 file changed, 4 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..224d79bd1749 100644

tests/kms_plane_alpha_blend.c +0 -4
@@ -447,10 +447,6 @@ static void coverage_premult_constant(data_t 
 *data, enum pipe pipe, igt_plane_t
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
 
-	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
-
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
tests/kms_plane_alpha_blend.c +0 -1
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
--

2.7.4

Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#8 lore raw

Re: [igt-dev] [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Hello,

Humble request for review of this please https://patchwork.freedesktop.org/series/90828/
Can anyone kindly help review this so we can request for merge?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Tuesday, June 15, 2021 1:55 PM
To: Modem, Bhanuprakash <[email protected]>; [email protected]; [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Hello Bhanu,

Sorry for the trouble. Kindly can you check if rev 3 is okay? Thanks a lot.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 11, 2021 6:28 PM
To: Modem, Bhanuprakash <[email protected]>; [email protected]; [email protected]
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Hello Bhanu,

I have uploaded version 3 where I have not removed primary plane. Instead I have added a commit of the primary plane and I have changed alpha. This passes on Gen11 systems.

Kindly check https://patchwork.freedesktop.org/patch/438831/?series=90828&rev=3 and suggest.

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 11, 2021 1:00 PM
To: Modem, Bhanuprakash <[email protected]>; [email protected]; [email protected]
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Thank you Bhanu. This test is failing on all planes > 0. Only plane 0 passes.
If I skip plane 1, it fails on 2 and so on.
Changing the way CRC is being collected also is not helping. Adding vblank is also not helping.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Friday, June 11, 2021 9:11 AM
To: Srinivas, Vidya <[email protected]>; [email protected]; [email protected]
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Quoted 9 lines

From: Intel-gfx <[email protected]> On Behalf Of Vidya Srinivas
Sent: Tuesday, June 1, 2021 7:38 PM
To: [email protected]; [email protected]
Subject: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend:
Don't set primary fb color in coverage-vs-premult-vs-constant

Patch removes setting primary fb color in coverage-vs-premult-vs-constant as this is causing CRC mismatch on few Gen11 systems.

I am not sure how Primary plane's bg color causing CRC mismatch.
Also, as this test runs on all planes (those are having the props "alpha" and "pixel blend mode"), is this test failing on a particular plane?

- Bhanu

Quoted 30 lines

Similar change has already been done in tests constant_alpha_min and basic_alpha where the test runs on all planes but dont set the primary fb color.

---
 tests/kms_plane_alpha_blend.c | 4 ----
 1 file changed, 4 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..224d79bd1749 100644

tests/kms_plane_alpha_blend.c +0 -4
@@ -447,10 +447,6 @@ static void coverage_premult_constant(data_t 
 *data, enum pipe pipe, igt_plane_t
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
 
-	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
-
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
tests/kms_plane_alpha_blend.c +0 -1
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
--

2.7.4

Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#9 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev2)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev2)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from IGT_6098 -> IGTPW_5871
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/index.html

Known issues
------------

Here are the changes found in IGTPW_5871 that come from known issues:

### IGT changes ###

#### Warnings ####

* igt@i915_selftest@live@execlists:
- fi-tgl-u2: [DMESG-FAIL][1] ([i915#3462]) -> [INCOMPLETE][2] ([i915#3462])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/fi-tgl-u2/igt@i915_selftest@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/fi-tgl-u2/igt@i915_selftest@[email protected]

* igt@runner@aborted:
- fi-skl-6600u: [FAIL][3] ([i915#1436] / [i915#3363]) -> [FAIL][4] ([i915#1436] / [i915#2426] / [i915#3363])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/fi-skl-6600u/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/fi-skl-6600u/igt@[email protected]
- fi-glk-dsi: [FAIL][5] ([i915#2426] / [i915#3363] / [k.org#202321]) -> [FAIL][6] ([i915#3363] / [k.org#202321])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/fi-glk-dsi/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/fi-glk-dsi/igt@[email protected]
- fi-kbl-7500u: [FAIL][7] ([i915#1436] / [i915#3363]) -> [FAIL][8] ([i915#1436] / [i915#2426] / [i915#3363])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/fi-kbl-7500u/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/fi-kbl-7500u/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
[i915#2426]: https://gitlab.freedesktop.org/drm/intel/issues/2426
[i915#2932]: https://gitlab.freedesktop.org/drm/intel/issues/2932
[i915#2966]: https://gitlab.freedesktop.org/drm/intel/issues/2966
[i915#3363]: https://gitlab.freedesktop.org/drm/intel/issues/3363
[i915#3462]: https://gitlab.freedesktop.org/drm/intel/issues/3462
[k.org#202321]: https://bugzilla.kernel.org/show_bug.cgi?id=202321

Participating hosts (47 -> 41)
------------------------------

Missing (6): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-dg1-1 fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6098 -> IGTPW_5871

CI-20190529: 20190529
CI_DRM_10154: 810010ed3d29e0500d452a90010a88a0879f2b45 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5871: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/index.html
IGT_6098: 1fbc1e7d602f96a7f4e2b95057eef994656b8e74 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#10 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev2)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev2)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from IGT_6098_full -> IGTPW_5871_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/index.html

Known issues
------------

Here are the changes found in IGTPW_5871_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@feature_discovery@display-3x:
- shard-glk: NOTRUN -> [SKIP][1] ([fdo#109271]) +83 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk9/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][2] ([i915#1839]) +1 similar issue
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb5/igt@[email protected]

* igt@gem_ctx_isolation@preservation-s3@rcs0:
- shard-kbl: [PASS][3] -> [DMESG-WARN][4] ([i915#180])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-kbl7/igt@gem_ctx_isolation@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl2/igt@gem_ctx_isolation@[email protected]

* igt@gem_ctx_persistence@idempotent:
- shard-snb: NOTRUN -> [SKIP][5] ([fdo#109271] / [i915#1099]) +5 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-snb2/igt@[email protected]

* igt@gem_ctx_sseu@invalid-sseu:
- shard-tglb: NOTRUN -> [SKIP][6] ([i915#280])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb5/igt@[email protected]

* igt@gem_exec_fair@basic-none-vip@rcs0:
- shard-tglb: NOTRUN -> [FAIL][7] ([i915#2842])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb2/igt@gem_exec_fair@[email protected]
- shard-iclb: NOTRUN -> [FAIL][8] ([i915#2842])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none@vcs1:
- shard-kbl: [PASS][9] -> [FAIL][10] ([i915#2842])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-kbl3/igt@gem_exec_fair@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-glk: [PASS][11] -> [FAIL][12] ([i915#2842]) +1 similar issue
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-glk6/igt@gem_exec_fair@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk2/igt@gem_exec_fair@[email protected]

* igt@gem_exec_flush@basic-batch-kernel-default-cmd:
- shard-iclb: NOTRUN -> [SKIP][13] ([fdo#109313])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb1/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][14] ([fdo#109313])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb1/igt@[email protected]

* igt@gem_exec_params@rsvd2-dirt:
- shard-tglb: NOTRUN -> [SKIP][15] ([fdo#109283])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][16] ([fdo#109283])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb5/igt@[email protected]

* igt@gem_exec_reloc@basic-wide-active@bcs0:
- shard-apl: NOTRUN -> [FAIL][17] ([i915#2389]) +3 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl6/igt@gem_exec_reloc@[email protected]
- shard-glk: NOTRUN -> [FAIL][18] ([i915#2389]) +3 similar issues
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk8/igt@gem_exec_reloc@[email protected]

* igt@gem_exec_reloc@basic-wide-active@rcs0:
- shard-iclb: NOTRUN -> [FAIL][19] ([i915#2389]) +4 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb1/igt@gem_exec_reloc@[email protected]

* igt@gem_mmap_gtt@cpuset-basic-small-copy:
- shard-apl: NOTRUN -> [INCOMPLETE][20] ([i915#3468])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl1/igt@[email protected]
- shard-tglb: [PASS][21] -> [INCOMPLETE][22] ([i915#3468])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-tglb6/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb8/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-basic-small-copy-xy:
- shard-glk: [PASS][23] -> [INCOMPLETE][24] ([i915#2055] / [i915#3468])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-glk5/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk8/igt@[email protected]

* igt@gem_mmap_gtt@medium-copy-xy:
- shard-glk: [PASS][25] -> [INCOMPLETE][26] ([i915#2055] / [i915#2502] / [i915#3468])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-glk9/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk4/igt@[email protected]

* igt@gem_pread@exhaustion:
- shard-apl: NOTRUN -> [WARN][27] ([i915#2658])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl7/igt@[email protected]

* igt@gem_render_copy@y-tiled-to-vebox-linear:
- shard-iclb: NOTRUN -> [SKIP][28] ([i915#768]) +2 similar issues
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb6/igt@[email protected]

* igt@gem_softpin@noreloc-s3:
- shard-apl: NOTRUN -> [DMESG-WARN][29] ([i915#180]) +1 similar issue
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl6/igt@[email protected]

* igt@gem_userptr_blits@coherency-sync:
- shard-tglb: NOTRUN -> [SKIP][30] ([fdo#110542])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][31] ([fdo#109290])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb1/igt@[email protected]

* igt@gem_userptr_blits@dmabuf-unsync:
- shard-tglb: NOTRUN -> [SKIP][32] ([i915#3297]) +1 similar issue
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][33] ([i915#3297]) +1 similar issue
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb8/igt@[email protected]

* igt@gem_userptr_blits@input-checking:
- shard-snb: NOTRUN -> [DMESG-WARN][34] ([i915#3002])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-snb5/igt@[email protected]

* igt@gem_userptr_blits@vma-merge:
- shard-kbl: NOTRUN -> [FAIL][35] ([i915#3318])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl3/igt@[email protected]

* igt@gen7_exec_parse@cmd-crossing-page:
- shard-tglb: NOTRUN -> [SKIP][36] ([fdo#109289]) +2 similar issues
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb7/igt@[email protected]

* igt@gen9_exec_parse@allowed-single:
- shard-tglb: NOTRUN -> [SKIP][37] ([fdo#112306]) +1 similar issue
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb2/igt@[email protected]

* igt@gen9_exec_parse@bb-large:
- shard-apl: NOTRUN -> [FAIL][38] ([i915#3296])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl7/igt@[email protected]

* igt@gen9_exec_parse@secure-batches:
- shard-iclb: NOTRUN -> [SKIP][39] ([fdo#112306]) +1 similar issue
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb7/igt@[email protected]

* igt@i915_module_load@reload-with-fault-injection:
- shard-snb: NOTRUN -> [DMESG-WARN][40] ([i915#3389])
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-snb2/igt@[email protected]

* igt@i915_pm_dc@dc9-dpms:
- shard-apl: [PASS][41] -> [SKIP][42] ([fdo#109271])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-apl7/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl1/igt@[email protected]

* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
- shard-kbl: NOTRUN -> [SKIP][43] ([fdo#109271] / [i915#1937])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl2/igt@i915_pm_lpsp@[email protected]

* igt@i915_pm_rpm@dpms-mode-unset-non-lpsp:
- shard-tglb: NOTRUN -> [SKIP][44] ([fdo#111644] / [i915#1397] / [i915#2411]) +1 similar issue
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][45] ([fdo#110892]) +1 similar issue
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb1/igt@[email protected]

* igt@kms_atomic_transition@plane-all-modeset-transition-fencing:
- shard-iclb: NOTRUN -> [SKIP][46] ([i915#1769])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb1/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][47] ([i915#1769])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb6/igt@[email protected]

* igt@kms_big_fb@linear-8bpp-rotate-270:
- shard-iclb: NOTRUN -> [SKIP][48] ([fdo#110725] / [fdo#111614]) +1 similar issue
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb8/igt@[email protected]

* igt@kms_big_fb@x-tiled-32bpp-rotate-90:
- shard-tglb: NOTRUN -> [SKIP][49] ([fdo#111614])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb5/igt@[email protected]

* igt@kms_big_fb@yf-tiled-64bpp-rotate-0:
- shard-tglb: NOTRUN -> [SKIP][50] ([fdo#111615])
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][51] ([fdo#110723])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb5/igt@[email protected]

* igt@kms_big_joiner@invalid-modeset:
- shard-iclb: NOTRUN -> [SKIP][52] ([i915#2705])
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb6/igt@[email protected]
- shard-apl: NOTRUN -> [SKIP][53] ([fdo#109271] / [i915#2705])
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl3/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][54] ([fdo#109271] / [i915#2705])
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk2/igt@[email protected]

* igt@kms_chamelium@dp-crc-multiple:
- shard-tglb: NOTRUN -> [SKIP][55] ([fdo#109284] / [fdo#111827]) +3 similar issues
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb3/igt@[email protected]

* igt@kms_chamelium@hdmi-crc-fast:
- shard-iclb: NOTRUN -> [SKIP][56] ([fdo#109284] / [fdo#111827]) +5 similar issues
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb6/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd:
- shard-glk: NOTRUN -> [SKIP][57] ([fdo#109271] / [fdo#111827]) +6 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk2/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-enable-disable-mode:
- shard-snb: NOTRUN -> [SKIP][58] ([fdo#109271] / [fdo#111827]) +18 similar issues
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-snb6/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-storm:
- shard-kbl: NOTRUN -> [SKIP][59] ([fdo#109271] / [fdo#111827]) +19 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl7/igt@[email protected]

* igt@kms_color@pipe-a-degamma:
- shard-tglb: NOTRUN -> [FAIL][60] ([i915#1149])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [FAIL][61] ([i915#1149])
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb2/igt@[email protected]

* igt@kms_color@pipe-d-ctm-0-5:
- shard-iclb: NOTRUN -> [SKIP][62] ([fdo#109278] / [i915#1149])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb2/igt@[email protected]

* igt@kms_color_chamelium@pipe-c-ctm-0-25:
- shard-apl: NOTRUN -> [SKIP][63] ([fdo#109271] / [fdo#111827]) +18 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl1/igt@[email protected]

* igt@kms_color_chamelium@pipe-d-ctm-0-75:
- shard-iclb: NOTRUN -> [SKIP][64] ([fdo#109278] / [fdo#109284] / [fdo#111827])
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb2/igt@[email protected]

* igt@kms_content_protection@dp-mst-type-0:
- shard-tglb: NOTRUN -> [SKIP][65] ([i915#3116])
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][66] ([i915#3116])
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb8/igt@[email protected]

* igt@kms_content_protection@legacy:
- shard-iclb: NOTRUN -> [SKIP][67] ([fdo#109300] / [fdo#111066]) +1 similar issue
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb6/igt@[email protected]
- shard-kbl: NOTRUN -> [TIMEOUT][68] ([i915#1319]) +1 similar issue
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl3/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][69] ([fdo#111828]) +1 similar issue
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb3/igt@[email protected]

* igt@kms_content_protection@lic:
- shard-apl: NOTRUN -> [TIMEOUT][70] ([i915#1319])
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl3/igt@[email protected]

* igt@kms_content_protection@uevent:
- shard-apl: NOTRUN -> [FAIL][71] ([i915#2105])
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl1/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-32x10-onscreen:
- shard-iclb: NOTRUN -> [SKIP][72] ([fdo#109278]) +16 similar issues
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb7/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][73] ([i915#3359]) +2 similar issues
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb8/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-512x170-offscreen:
- shard-iclb: NOTRUN -> [SKIP][74] ([fdo#109278] / [fdo#109279]) +2 similar issues
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb2/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-512x170-random:
- shard-tglb: NOTRUN -> [SKIP][75] ([fdo#109279] / [i915#3359]) +1 similar issue
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb3/igt@[email protected]

* igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic:
- shard-iclb: NOTRUN -> [SKIP][76] ([fdo#109274] / [fdo#109278]) +1 similar issue
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb6/igt@[email protected]

* igt@kms_cursor_legacy@pipe-d-single-bo:
- shard-kbl: NOTRUN -> [SKIP][77] ([fdo#109271] / [i915#533]) +1 similar issue
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl4/igt@[email protected]

* igt@kms_dp_tiled_display@basic-test-pattern-with-chamelium:
- shard-tglb: NOTRUN -> [SKIP][78] ([i915#3528])
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][79] ([i915#3528])
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb2/igt@[email protected]

* igt@kms_flip@2x-flip-vs-rmfb-interruptible:
- shard-iclb: NOTRUN -> [SKIP][80] ([fdo#109274]) +4 similar issues
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb7/igt@[email protected]

* igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
- shard-kbl: NOTRUN -> [DMESG-WARN][81] ([i915#180]) +5 similar issues
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl4/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytileccs:
- shard-tglb: NOTRUN -> [SKIP][82] ([i915#2587])
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb6/igt@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs:
- shard-kbl: NOTRUN -> [SKIP][83] ([fdo#109271] / [i915#2672])
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl4/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs.html
- shard-apl: NOTRUN -> [SKIP][84] ([fdo#109271] / [i915#2672])
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl6/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs.html

* igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile:
- shard-snb: NOTRUN -> [SKIP][85] ([fdo#109271]) +407 similar issues
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-snb7/igt@[email protected]
- shard-kbl: NOTRUN -> [SKIP][86] ([fdo#109271] / [i915#2642])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl7/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-shrfb-pgflip-blt:
- shard-iclb: NOTRUN -> [SKIP][87] ([fdo#109280]) +34 similar issues
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb1/igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-shrfb-pgflip-blt.html

* igt@kms_frontbuffer_tracking@psr-2p-primscrn-indfb-pgflip-blt:
- shard-tglb: NOTRUN -> [SKIP][88] ([fdo#111825]) +37 similar issues
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb2/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-rgb101010-draw-mmap-wc:
- shard-kbl: NOTRUN -> [SKIP][89] ([fdo#109271]) +247 similar issues
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl1/igt@[email protected]

* igt@kms_multipipe_modeset@basic-max-pipe-crc-check:
- shard-tglb: NOTRUN -> [SKIP][90] ([i915#1839]) +1 similar issue
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb2/igt@[email protected]

* igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d:
- shard-apl: NOTRUN -> [SKIP][91] ([fdo#109271] / [i915#533])
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl7/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-alpha-opaque-fb:
- shard-apl: NOTRUN -> [FAIL][92] ([fdo#108145] / [i915#265]) +4 similar issues
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl3/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-constant-alpha-max:
- shard-glk: NOTRUN -> [FAIL][93] ([fdo#108145] / [i915#265])
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk5/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-alpha-7efc:
- shard-kbl: NOTRUN -> [FAIL][94] ([fdo#108145] / [i915#265]) +5 similar issues
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl2/igt@[email protected]

* igt@kms_plane_lowres@pipe-b-tiling-y:
- shard-tglb: NOTRUN -> [SKIP][95] ([i915#3536])
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][96] ([i915#3536])
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb1/igt@[email protected]

* igt@kms_plane_lowres@pipe-d-tiling-yf:
- shard-tglb: NOTRUN -> [SKIP][97] ([fdo#112054])
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb7/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-2:
- shard-tglb: NOTRUN -> [SKIP][98] ([i915#2920]) +2 similar issues
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb8/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][99] ([i915#658]) +1 similar issue
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb7/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][100] ([fdo#109271] / [i915#658]) +1 similar issue
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk9/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-4:
- shard-apl: NOTRUN -> [SKIP][101] ([fdo#109271] / [i915#658]) +5 similar issues
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl6/igt@[email protected]

* igt@kms_psr2_sf@plane-move-sf-dmg-area-3:
- shard-iclb: NOTRUN -> [SKIP][102] ([i915#2920])
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb2/igt@[email protected]
- shard-kbl: NOTRUN -> [SKIP][103] ([fdo#109271] / [i915#658]) +6 similar issues
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl7/igt@[email protected]

* igt@kms_psr2_su@frontbuffer:
- shard-iclb: [PASS][104] -> [SKIP][105] ([fdo#109642] / [fdo#111068] / [i915#658])
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-iclb2/igt@[email protected]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb5/igt@[email protected]

* igt@kms_psr@psr2_cursor_mmap_cpu:
- shard-iclb: NOTRUN -> [SKIP][106] ([fdo#109441]) +1 similar issue
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb5/igt@kms_psr@psr2_cursor_mmap_cpu.html
- shard-tglb: NOTRUN -> [FAIL][107] ([i915#132] / [i915#3467]) +1 similar issue
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb5/igt@kms_psr@psr2_cursor_mmap_cpu.html

* igt@kms_psr@psr2_sprite_render:
- shard-iclb: [PASS][108] -> [SKIP][109] ([fdo#109441]) +1 similar issue
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-iclb2/igt@kms_psr@psr2_sprite_render.html
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb1/igt@kms_psr@psr2_sprite_render.html

* igt@kms_vblank@pipe-d-ts-continuation-idle:
- shard-apl: NOTRUN -> [SKIP][110] ([fdo#109271]) +259 similar issues
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl7/igt@[email protected]

* igt@kms_vrr@flip-suspend:
- shard-iclb: NOTRUN -> [SKIP][111] ([fdo#109502])
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb5/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][112] ([fdo#109502])
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb5/igt@[email protected]

* igt@kms_writeback@writeback-pixel-formats:
- shard-kbl: NOTRUN -> [SKIP][113] ([fdo#109271] / [i915#2437])
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl4/igt@[email protected]

* igt@nouveau_crc@pipe-b-source-outp-inactive:
- shard-iclb: NOTRUN -> [SKIP][114] ([i915#2530])
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb2/igt@[email protected]

* igt@nouveau_crc@pipe-d-ctx-flip-skip-current-frame:
- shard-iclb: NOTRUN -> [SKIP][115] ([fdo#109278] / [i915#2530])
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb8/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][116] ([i915#2530])
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb7/igt@[email protected]

* igt@perf@unprivileged-single-ctx-counters:
- shard-iclb: NOTRUN -> [SKIP][117] ([fdo#109289]) +4 similar issues
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb7/igt@[email protected]

* igt@prime_nv_api@nv_self_import_to_different_fd:
- shard-tglb: NOTRUN -> [SKIP][118] ([fdo#109291]) +2 similar issues
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb7/igt@prime_nv_api@nv_self_import_to_different_fd.html

* igt@prime_nv_test@i915_nv_sharing:
- shard-iclb: NOTRUN -> [SKIP][119] ([fdo#109291]) +3 similar issues
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb2/igt@prime_nv_test@i915_nv_sharing.html

* igt@sysfs_clients@fair-7:
- shard-apl: NOTRUN -> [SKIP][120] ([fdo#109271] / [i915#2994]) +2 similar issues
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl2/igt@[email protected]

* igt@sysfs_clients@recycle:
- shard-iclb: NOTRUN -> [SKIP][121] ([i915#2994])
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb6/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][122] ([fdo#109271] / [i915#2994])
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk6/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][123] ([i915#2994])
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb3/igt@[email protected]

* igt@sysfs_clients@sema-50:
- shard-kbl: NOTRUN -> [SKIP][124] ([fdo#109271] / [i915#2994]) +3 similar issues
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl1/igt@[email protected]

#### Possible fixes ####

* igt@gem_ctx_persistence@many-contexts:
- shard-tglb: [FAIL][125] ([i915#2410]) -> [PASS][126]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-tglb5/igt@[email protected]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-tglb1/igt@[email protected]

* igt@gem_exec_fair@basic-none@vcs0:
- shard-kbl: [FAIL][127] ([i915#2842]) -> [PASS][128]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-kbl3/igt@gem_exec_fair@[email protected]
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-kbl1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-glk: [FAIL][129] ([i915#2842]) -> [PASS][130]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-glk1/igt@gem_exec_fair@[email protected]
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-glk1/igt@gem_exec_fair@[email protected]

* igt@gem_mmap_gtt@cpuset-basic-small-copy-odd:
- shard-iclb: [INCOMPLETE][131] ([i915#2910] / [i915#3468]) -> [PASS][132]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-iclb6/igt@[email protected]
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb1/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-basic-small-copy-xy:
- shard-apl: [INCOMPLETE][133] ([i915#3468]) -> [PASS][134]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-apl7/igt@[email protected]
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-apl6/igt@[email protected]
- shard-iclb: [INCOMPLETE][135] ([i915#3468]) -> [PASS][136]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6098/shard-iclb7/igt@[email protected]
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/shard-iclb8/igt@[email protected]

* igt@gem_ppgtt@flink-and-close-vma-leak:
- shard-glk: [FAIL][137] ([i915#644]) -> [PASS][138]
[137]: https://intel-gfx-ci.01.org/

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5871/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Tested-by on v1 1/1
#11 lore raw
In reply to Vidya Srinivas
Quoted 4 lines · Vidya Srinivas

Few Gen11 systems show CRC mismatch. Make coverage-vs-premult-vs-constant code similar to constant_alpha_min or basic_alpha

Tested on ChromeOS on JSL (Drawlat)

Quoted 23 lines
---
 tests/kms_plane_alpha_blend.c | 4 ----
 1 file changed, 4 deletions(-)
tests/kms_plane_alpha_blend.c +0 -5
index a37cb27c7d62..224d79bd1749 100644
@@ -447,10 +447,6 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
        igt_display_t *display = &data->display;
        igt_crc_t ref_crc = {}, crc = {};
 
-       /* Set a background color on the primary fb for testing */
-       if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-               igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
-
        igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
        igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
        igt_display_commit2(display, COMMIT_ATOMIC);
--

2.7.4

Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

author Tested-by Mark Yacoub
#12 lore raw

Thank you very much Mark, for testing the patch and providing the "Tested-by" tag.

Regards
Vidya

-----Original Message-----
From: Mark Yacoub <[email protected]>
Sent: Saturday, June 5, 2021 12:12 AM
To: Srinivas, Vidya <[email protected]>
Cc: [email protected]; [email protected]
Subject: Re: [igt-dev] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests

Quoted 5 lines · Vidya Srinivas

Few Gen11 systems show CRC mismatch. Make coverage-vs-premult-vs-constant code similar to constant_alpha_min or basic_alpha

Tested on ChromeOS on JSL (Drawlat)

Quoted 24 lines
---
 tests/kms_plane_alpha_blend.c | 4 ----
 1 file changed, 4 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..224d79bd1749 100644

tests/kms_plane_alpha_blend.c +0 -5
@@ -447,10 +447,6 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
        igt_display_t *display = &data->display;
        igt_crc_t ref_crc = {}, crc = {};
 
-       /* Set a background color on the primary fb for testing */
-       if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-               igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
-
        igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
        igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
        igt_display_commit2(display, COMMIT_ATOMIC);
--

2.7.4

Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#13 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

In reply to Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
 tests/kms_plane_alpha_blend.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +7 -2
index a37cb27c7d62..d3a73cf43fcd 100644
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_crc_t ref_crc = {}, crc = {};
 
 	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
 		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);
+	}
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_start(data->pipe_crc);
 	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
 	igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
 	igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
+
 }
 
 static void run_test_on_pipe_planes(data_t *data, enum pipe pipe, bool blend,
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#14 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 15 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
  tests/kms_plane_alpha_blend.c | 9 +++++++--
  1 file changed, 7 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +0 -0
index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 453

Quoted 7 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
  	igt_crc_t ref_crc = {}, crc = {};
 
  	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
  		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 457

Quoted 4 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 12 lines
tests/kms_plane_alpha_blend.c +1 -0
  	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
  	igt_display_commit2(display, COMMIT_ATOMIC);
  	igt_pipe_crc_start(data->pipe_crc);
  	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
  	igt_plane_set_fb(plane, &data->argb_fb_7e);
  	igt_display_commit2(display, COMMIT_ATOMIC);
  	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
  	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 478

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
  	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
  	igt_display_commit2(display, COMMIT_ATOMIC);
  	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
  	igt_assert_crc_equal(&ref_crc, &crc);
 
  	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 481

Quoted 4 lines
tests/kms_plane_alpha_blend.c +0 -0
  }
 
  static void run_test_on_pipe_planes(data_t *data, enum pipe pipe, bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#15 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2 just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
  tests/kms_plane_alpha_blend.c | 9 +++++++--
  1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 454

Quoted 8 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
  	igt_crc_t ref_crc = {}, crc = {};
 
  	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
  		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], 
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 457

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
  	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
  	igt_display_commit2(display, COMMIT_ATOMIC);
  	igt_pipe_crc_start(data->pipe_crc);
  	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
  	igt_plane_set_fb(plane, &data->argb_fb_7e);
  	igt_display_commit2(display, COMMIT_ATOMIC);
  	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
  	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 478

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
  	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
  	igt_display_commit2(display, COMMIT_ATOMIC);
  	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
  	igt_assert_crc_equal(&ref_crc, &crc);
 
  	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines
  }

static void run_test_on_pipe_planes(data_t *data, enum pipe pipe,
bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#16 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Have you tried looking if on kernel side in intel_display.c icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 77 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2 just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
   tests/kms_plane_alpha_blend.c | 9 +++++++--
   1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 454

Quoted 8 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
   	igt_crc_t ref_crc = {}, crc = {};
 
   	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
   		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 457

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
   	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 21 lines
tests/kms_plane_alpha_blend.c +2 -1
   	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
   	igt_display_commit2(display, COMMIT_ATOMIC);
   	igt_pipe_crc_start(data->pipe_crc);
   	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
   	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
   	igt_plane_set_fb(plane, &data->argb_fb_7e);
   	igt_display_commit2(display, COMMIT_ATOMIC);
   	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
   	igt_assert_crc_equal(&ref_crc, &crc);
 
   	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
   	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
   	igt_display_commit2(display, COMMIT_ATOMIC);
   	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
   	igt_assert_crc_equal(&ref_crc, &crc);
 
Quoted 11 lines

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 478

Quoted 2 lines
tests/kms_plane_alpha_blend.c +1 -0
   	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines
   }

static void run_test_on_pipe_planes(data_t *data, enum pipe pipe,
bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#17 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 81 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
   tests/kms_plane_alpha_blend.c | 9 +++++++--
   1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 454

Quoted 8 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
   	igt_crc_t ref_crc = {}, crc = {};
 
   	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
   		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 457

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
   	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 21 lines
tests/kms_plane_alpha_blend.c +2 -1
   	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
   	igt_display_commit2(display, COMMIT_ATOMIC);
   	igt_pipe_crc_start(data->pipe_crc);
   	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
   	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
   	igt_plane_set_fb(plane, &data->argb_fb_7e);
   	igt_display_commit2(display, COMMIT_ATOMIC);
   	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
   	igt_assert_crc_equal(&ref_crc, &crc);
 
   	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
   	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
   	igt_display_commit2(display, COMMIT_ATOMIC);
   	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
   	igt_assert_crc_equal(&ref_crc, &crc);
 
Quoted 11 lines

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 478

Quoted 2 lines
tests/kms_plane_alpha_blend.c +1 -0
   	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines
   }

static void run_test_on_pipe_planes(data_t *data, enum pipe pipe,
bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#18 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 81 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
   tests/kms_plane_alpha_blend.c | 9 +++++++--
   1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 454

Quoted 8 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
   	igt_crc_t ref_crc = {}, crc = {};
 
   	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
   		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 457

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
   	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 21 lines
tests/kms_plane_alpha_blend.c +2 -1
   	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
   	igt_display_commit2(display, COMMIT_ATOMIC);
   	igt_pipe_crc_start(data->pipe_crc);
   	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
   	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
   	igt_plane_set_fb(plane, &data->argb_fb_7e);
   	igt_display_commit2(display, COMMIT_ATOMIC);
   	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
   	igt_assert_crc_equal(&ref_crc, &crc);
 
   	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
   	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
   	igt_display_commit2(display, COMMIT_ATOMIC);
   	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
   	igt_assert_crc_equal(&ref_crc, &crc);
 
Quoted 11 lines

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 478

Quoted 2 lines
tests/kms_plane_alpha_blend.c +1 -0
   	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines
   }

static void run_test_on_pipe_planes(data_t *data, enum pipe pipe,
bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#19 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hi Vidya,

I don't now have access to specs so I can't say if there would be something special for JSL on this case. OTOH if changing gray buffer to solid white fixes that maybe good solution, I'm trying to think how the screen will be in this case and I assume test image will remain on screen(?). If just changing gray buffer to solid white make test pass there maybe also 0.25 gray and 0.75 gray which will work. It wouldn't be the first time there is found case with specific color which causes rounding error with crc where it's just more convenient to change that color.

I don't know can it be used in this case but there might be possibility to do gamma table trick if nothing else works. This is used in kms_plane and kms_flip_scaled_crc that come to my mind, in tests/kms_flip_scaled_crc.c look for set_lut(..) function and how it is used.

I'd avoid creating special cases for some hw versions, it will lead to big mess in the end.

/Juha-Pekka

Srinivas, Vidya kirjoitti 18.6.2021 klo 21.54:

Quoted 30 lines

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 99 lines

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 92 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
    tests/kms_plane_alpha_blend.c | 9 +++++++--
    1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 454

Quoted 8 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
    	igt_crc_t ref_crc = {}, crc = {};
 
    	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
    		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 457

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
    	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
    	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
    	igt_display_commit2(display, COMMIT_ATOMIC);
    	igt_pipe_crc_start(data->pipe_crc);
    	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
    	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
    	igt_plane_set_fb(plane, &data->argb_fb_7e);
    	igt_display_commit2(display, COMMIT_ATOMIC);
    	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
    	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 478

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
    	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
    	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
    	igt_display_commit2(display, COMMIT_ATOMIC);
    	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
    	igt_assert_crc_equal(&ref_crc, &crc);
 
    	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines

}

static void run_test_on_pipe_planes(data_t *data, enum pipe pipe,
bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#20 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will try out the gamma thing you mentioned and update further.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 1:54 AM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hi Vidya,

I don't now have access to specs so I can't say if there would be something special for JSL on this case. OTOH if changing gray buffer to solid white fixes that maybe good solution, I'm trying to think how the screen will be in this case and I assume test image will remain on screen(?). If just changing gray buffer to solid white make test pass there maybe also 0.25 gray and 0.75 gray which will work. It wouldn't be the first time there is found case with specific color which causes rounding error with crc where it's just more convenient to change that color.

I don't know can it be used in this case but there might be possibility to do gamma table trick if nothing else works. This is used in kms_plane and kms_flip_scaled_crc that come to my mind, in tests/kms_flip_scaled_crc.c look for set_lut(..) function and how it is used.

I'd avoid creating special cases for some hw versions, it will lead to big mess in the end.

/Juha-Pekka

Srinivas, Vidya kirjoitti 18.6.2021 klo 21.54:

Quoted 35 lines

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 100 lines

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 93 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
    tests/kms_plane_alpha_blend.c | 9 +++++++--
    1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 455

Quoted 9 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
    	igt_crc_t ref_crc = {}, crc = {};
 
    	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
 
 igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 460

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
    	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
    	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
    	igt_display_commit2(display, COMMIT_ATOMIC);
    	igt_pipe_crc_start(data->pipe_crc);
    	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
    	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
    	igt_plane_set_fb(plane, &data->argb_fb_7e);
    	igt_display_commit2(display, COMMIT_ATOMIC);
    	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
    	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
    	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
    	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
    	igt_display_commit2(display, COMMIT_ATOMIC);
    	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
    	igt_assert_crc_equal(&ref_crc, &crc);
 
    	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines

}

static void run_test_on_pipe_planes(data_t *data, enum pipe
pipe, bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#21 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hello Juha-Pekka,

Thank you so much. I tried the LUT table you suggested and it worked https://patchwork.freedesktop.org/patch/440145/?series=90828&rev=4
Could you kindly check if it is right? 0.25 and 0.75 did not work. 1,1,1 too is failing once in a while.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Saturday, June 19, 2021 8:40 AM
To: Juha-Pekka Heikkilä <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will try out the gamma thing you mentioned and update further.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 1:54 AM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hi Vidya,

I don't now have access to specs so I can't say if there would be something special for JSL on this case. OTOH if changing gray buffer to solid white fixes that maybe good solution, I'm trying to think how the screen will be in this case and I assume test image will remain on screen(?). If just changing gray buffer to solid white make test pass there maybe also 0.25 gray and 0.75 gray which will work. It wouldn't be the first time there is found case with specific color which causes rounding error with crc where it's just more convenient to change that color.

I don't know can it be used in this case but there might be possibility to do gamma table trick if nothing else works. This is used in kms_plane and kms_flip_scaled_crc that come to my mind, in tests/kms_flip_scaled_crc.c look for set_lut(..) function and how it is used.

I'd avoid creating special cases for some hw versions, it will lead to big mess in the end.

/Juha-Pekka

Srinivas, Vidya kirjoitti 18.6.2021 klo 21.54:

Quoted 35 lines

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 100 lines

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 93 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
    tests/kms_plane_alpha_blend.c | 9 +++++++--
    1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 455

Quoted 9 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
    	igt_crc_t ref_crc = {}, crc = {};
 
    	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
 
 igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 460

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
    	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
    	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
    	igt_display_commit2(display, COMMIT_ATOMIC);
    	igt_pipe_crc_start(data->pipe_crc);
    	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
    	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
    	igt_plane_set_fb(plane, &data->argb_fb_7e);
    	igt_display_commit2(display, COMMIT_ATOMIC);
    	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
    	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
    	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
    	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
    	igt_display_commit2(display, COMMIT_ATOMIC);
    	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
    	igt_assert_crc_equal(&ref_crc, &crc);
 
    	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines

}

static void run_test_on_pipe_planes(data_t *data, enum pipe
pipe, bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#22 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

That issue where solid white is also failing *sometimes* sound like there maybe two separate issues.

I'd suggest for experimenting try using solid white, move starting of crc counting at the very beginning of the test function and place wait for vblank always before reading crcs. If this will help then the same crc issue which was earlier on kms_big_fb test is also causing problem here.

/Juha-Pekka

Quoted 31 lines · Vidya

Hello Juha-Pekka,

Thank you so much. I tried the LUT table you suggested and it worked https://patchwork.freedesktop.org/patch/440145/?series=90828&rev=4
Could you kindly check if it is right? 0.25 and 0.75 did not work. 1,1,1 too is failing once in a while.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Saturday, June 19, 2021 8:40 AM
To: Juha-Pekka Heikkilä <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will try out the gamma thing you mentioned and update further.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 1:54 AM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hi Vidya,

I don't now have access to specs so I can't say if there would be something special for JSL on this case. OTOH if changing gray buffer to solid white fixes that maybe good solution, I'm trying to think how the screen will be in this case and I assume test image will remain on screen(?). If just changing gray buffer to solid white make test pass there maybe also 0.25 gray and 0.75 gray which will work. It wouldn't be the first time there is found case with specific color which causes rounding error with crc where it's just more convenient to change that color.

Quoted 142 lines

I don't know can it be used in this case but there might be possibility to do gamma table trick if nothing else works. This is used in kms_plane and kms_flip_scaled_crc that come to my mind, in tests/kms_flip_scaled_crc.c look for set_lut(..) function and how it is used.

I'd avoid creating special cases for some hw versions, it will lead to big mess in the end.

/Juha-Pekka

Srinivas, Vidya kirjoitti 18.6.2021 klo 21.54:

Quoted 135 lines

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 93 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
     tests/kms_plane_alpha_blend.c | 9 +++++++--
     1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 455

Quoted 9 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
     	igt_crc_t ref_crc = {}, crc = {};
 
     	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
 
 igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 460

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
     	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_start(data->pipe_crc);
     	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
     	igt_plane_set_fb(plane, &data->argb_fb_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
     	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
     	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
     	igt_assert_crc_equal(&ref_crc, &crc);
 
     	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines

}

static void run_test_on_pipe_planes(data_t *data, enum pipe
pipe, bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#23 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will try the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Monday, June 21, 2021 1:35 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

That issue where solid white is also failing *sometimes* sound like there maybe two separate issues.

I'd suggest for experimenting try using solid white, move starting of crc counting at the very beginning of the test function and place wait for vblank always before reading crcs. If this will help then the same crc issue which was earlier on kms_big_fb test is also causing problem here.

/Juha-Pekka

Quoted 38 lines · Vidya

Hello Juha-Pekka,

Thank you so much. I tried the LUT table you suggested and it worked
https://patchwork.freedesktop.org/patch/440145/?series=90828&rev=4
Could you kindly check if it is right? 0.25 and 0.75 did not work. 1,1,1 too is failing once in a while.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Saturday, June 19, 2021 8:40 AM
To: Juha-Pekka Heikkilä <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will try out the gamma thing you mentioned and update further.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 1:54 AM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hi Vidya,

I don't now have access to specs so I can't say if there would be something special for JSL on this case. OTOH if changing gray buffer to solid white fixes that maybe good solution, I'm trying to think how the screen will be in this case and I assume test image will remain on screen(?). If just changing gray buffer to solid white make test pass there maybe also 0.25 gray and 0.75 gray which will work. It wouldn't be the first time there is found case with specific color which causes rounding error with crc where it's just more convenient to change that color.

Quoted 142 lines

I don't know can it be used in this case but there might be possibility to do gamma table trick if nothing else works. This is used in kms_plane and kms_flip_scaled_crc that come to my mind, in tests/kms_flip_scaled_crc.c look for set_lut(..) function and how it is used.

I'd avoid creating special cases for some hw versions, it will lead to big mess in the end.

/Juha-Pekka

Srinivas, Vidya kirjoitti 18.6.2021 klo 21.54:

Quoted 135 lines

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 93 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
     tests/kms_plane_alpha_blend.c | 9 +++++++--
     1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 455

Quoted 9 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
     	igt_crc_t ref_crc = {}, crc = {};
 
     	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
 
 igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 460

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
     	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_start(data->pipe_crc);
     	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
     	igt_plane_set_fb(plane, &data->argb_fb_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
     	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
     	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
     	igt_assert_crc_equal(&ref_crc, &crc);
 
     	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines

}

static void run_test_on_pipe_planes(data_t *data, enum pipe
pipe, bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#24 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

In reply to Juha-Pekka Heikkila

Hello Juha-Pekka,

Thank you so much. I tried pulling the crc start to the beginning and used current crc same way as kms_big_fb. Whatever I do, with regular white fb, I couldn’t get it working even once (it had worked the other day). I tried normal ARGB white fb too instead of XRGB but that too wont work. I created another gray fb with alpha like the other argb buffers and this seems to work. Both gray and white work. I have kept it gray for now.

Apologies for bothering you. Kindly have a check of this version and suggest please https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Monday, June 21, 2021 1:35 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

That issue where solid white is also failing *sometimes* sound like there maybe two separate issues.

I'd suggest for experimenting try using solid white, move starting of crc counting at the very beginning of the test function and place wait for vblank always before reading crcs. If this will help then the same crc issue which was earlier on kms_big_fb test is also causing problem here.

/Juha-Pekka

Quoted 38 lines · Vidya

Hello Juha-Pekka,

Thank you so much. I tried the LUT table you suggested and it worked
https://patchwork.freedesktop.org/patch/440145/?series=90828&rev=4
Could you kindly check if it is right? 0.25 and 0.75 did not work. 1,1,1 too is failing once in a while.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Saturday, June 19, 2021 8:40 AM
To: Juha-Pekka Heikkilä <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will try out the gamma thing you mentioned and update further.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 1:54 AM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hi Vidya,

I don't now have access to specs so I can't say if there would be something special for JSL on this case. OTOH if changing gray buffer to solid white fixes that maybe good solution, I'm trying to think how the screen will be in this case and I assume test image will remain on screen(?). If just changing gray buffer to solid white make test pass there maybe also 0.25 gray and 0.75 gray which will work. It wouldn't be the first time there is found case with specific color which causes rounding error with crc where it's just more convenient to change that color.

Quoted 142 lines

I don't know can it be used in this case but there might be possibility to do gamma table trick if nothing else works. This is used in kms_plane and kms_flip_scaled_crc that come to my mind, in tests/kms_flip_scaled_crc.c look for set_lut(..) function and how it is used.

I'd avoid creating special cases for some hw versions, it will lead to big mess in the end.

/Juha-Pekka

Srinivas, Vidya kirjoitti 18.6.2021 klo 21.54:

Quoted 135 lines

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 93 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
     tests/kms_plane_alpha_blend.c | 9 +++++++--
     1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 455

Quoted 9 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
     	igt_crc_t ref_crc = {}, crc = {};
 
     	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
 
 igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 460

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
     	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_start(data->pipe_crc);
     	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
     	igt_plane_set_fb(plane, &data->argb_fb_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
     	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
     	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
     	igt_assert_crc_equal(&ref_crc, &crc);
 
     	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines

}

static void run_test_on_pipe_planes(data_t *data, enum pipe
pipe, bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#25 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hello Juha-Pekka,

Really sorry to bother you again. Kindly check this version please https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6

I tried pulling the crc start to the beginning and used current crc same way as kms_big_fb. Whatever I do, with regular white fb, I couldn’t get it working even once. I tried normal ARGB white fb too instead of XRGB but that too wont work. I created another gray fb with alpha like the other argb buffers and this seems to work. Both gray and white work. I have kept it gray for now.

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Monday, June 21, 2021 7:03 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hello Juha-Pekka,

Thank you so much. I tried pulling the crc start to the beginning and used current crc same way as kms_big_fb. Whatever I do, with regular white fb, I couldn’t get it working even once (it had worked the other day). I tried normal ARGB white fb too instead of XRGB but that too wont work. I created another gray fb with alpha like the other argb buffers and this seems to work. Both gray and white work. I have kept it gray for now.

Apologies for bothering you. Kindly have a check of this version and suggest please https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Monday, June 21, 2021 1:35 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

That issue where solid white is also failing *sometimes* sound like there maybe two separate issues.

I'd suggest for experimenting try using solid white, move starting of crc counting at the very beginning of the test function and place wait for vblank always before reading crcs. If this will help then the same crc issue which was earlier on kms_big_fb test is also causing problem here.

/Juha-Pekka

Quoted 38 lines · Vidya

Hello Juha-Pekka,

Thank you so much. I tried the LUT table you suggested and it worked
https://patchwork.freedesktop.org/patch/440145/?series=90828&rev=4
Could you kindly check if it is right? 0.25 and 0.75 did not work. 1,1,1 too is failing once in a while.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Saturday, June 19, 2021 8:40 AM
To: Juha-Pekka Heikkilä <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will try out the gamma thing you mentioned and update further.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 1:54 AM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hi Vidya,

I don't now have access to specs so I can't say if there would be something special for JSL on this case. OTOH if changing gray buffer to solid white fixes that maybe good solution, I'm trying to think how the screen will be in this case and I assume test image will remain on screen(?). If just changing gray buffer to solid white make test pass there maybe also 0.25 gray and 0.75 gray which will work. It wouldn't be the first time there is found case with specific color which causes rounding error with crc where it's just more convenient to change that color.

Quoted 142 lines

I don't know can it be used in this case but there might be possibility to do gamma table trick if nothing else works. This is used in kms_plane and kms_flip_scaled_crc that come to my mind, in tests/kms_flip_scaled_crc.c look for set_lut(..) function and how it is used.

I'd avoid creating special cases for some hw versions, it will lead to big mess in the end.

/Juha-Pekka

Srinivas, Vidya kirjoitti 18.6.2021 klo 21.54:

Quoted 135 lines

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 93 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
     tests/kms_plane_alpha_blend.c | 9 +++++++--
     1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 455

Quoted 9 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
     	igt_crc_t ref_crc = {}, crc = {};
 
     	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
 
 igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 460

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
     	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_start(data->pipe_crc);
     	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
     	igt_plane_set_fb(plane, &data->argb_fb_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
     	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
     	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
     	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
     	igt_display_commit2(display, COMMIT_ATOMIC);
     	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
     	igt_assert_crc_equal(&ref_crc, &crc);
 
     	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines

}

static void run_test_on_pipe_planes(data_t *data, enum pipe
pipe, bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#26 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hei Vidya,

your overall test result did look green but it is because of some filter in ci which masked out new failures.

If you look at this you see the change did introduce new failures on test you're changing:

https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shards-all.html?testfilter=kms_plane_alpha_blend@pipe-*.-coverage-vs-premult-vs-constant

Then I think there's problem on this (from https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6):

+ cr = igt_get_cairo_ctx(data->gfx_fd, &data->argb_gray_fb);
+ cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
+ igt_paint_color_alpha(cr, 0, 0, w, h, .5, .5, .5, 0.0);
+ igt_put_cairo_ctx(cr);

you see on igt_paint_color_alpha(..), alpha value is zero. Is that meant to be? I think gray and white with this alpha will look the same as black.

Though, I'm still wondering why didn't masking bits away with gamma fix this. Did you see the screen it was looking ok when you tried using gamma table?

/Juha-Pekka

Quoted 34 lines · Vidya

Hello Juha-Pekka,

Really sorry to bother you again. Kindly check this version please https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6

I tried pulling the crc start to the beginning and used current crc same way as kms_big_fb. Whatever I do, with regular white fb, I couldn’t get it working even once. I tried normal ARGB white fb too instead of XRGB but that too wont work. I created another gray fb with alpha like the other argb buffers and this seems to work. Both gray and white work. I have kept it gray for now.

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Monday, June 21, 2021 7:03 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hello Juha-Pekka,

Thank you so much. I tried pulling the crc start to the beginning and used current crc same way as kms_big_fb. Whatever I do, with regular white fb, I couldn’t get it working even once (it had worked the other day). I tried normal ARGB white fb too instead of XRGB but that too wont work. I created another gray fb with alpha like the other argb buffers and this seems to work. Both gray and white work. I have kept it gray for now.

Apologies for bothering you. Kindly have a check of this version and suggest please https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Monday, June 21, 2021 1:35 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 188 lines

That issue where solid white is also failing *sometimes* sound like there maybe two separate issues.

I'd suggest for experimenting try using solid white, move starting of crc counting at the very beginning of the test function and place wait for vblank always before reading crcs. If this will help then the same crc issue which was earlier on kms_big_fb test is also causing problem here.

/Juha-Pekka

Quoted 180 lines · Vidya

Hello Juha-Pekka,

Thank you so much. I tried the LUT table you suggested and it worked
https://patchwork.freedesktop.org/patch/440145/?series=90828&rev=4
Could you kindly check if it is right? 0.25 and 0.75 did not work. 1,1,1 too is failing once in a while.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Saturday, June 19, 2021 8:40 AM
To: Juha-Pekka Heikkilä <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will try out the gamma thing you mentioned and update further.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 1:54 AM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hi Vidya,

I don't now have access to specs so I can't say if there would be something special for JSL on this case. OTOH if changing gray buffer to solid white fixes that maybe good solution, I'm trying to think how the screen will be in this case and I assume test image will remain on screen(?). If just changing gray buffer to solid white make test pass there maybe also 0.25 gray and 0.75 gray which will work. It wouldn't be the first time there is found case with specific color which causes rounding error with crc where it's just more convenient to change that color.

I don't know can it be used in this case but there might be possibility to do gamma table trick if nothing else works. This is used in kms_plane and kms_flip_scaled_crc that come to my mind, in tests/kms_flip_scaled_crc.c look for set_lut(..) function and how it is used.

I'd avoid creating special cases for some hw versions, it will lead to big mess in the end.

/Juha-Pekka

Srinivas, Vidya kirjoitti 18.6.2021 klo 21.54:

Quoted 135 lines

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 93 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
      tests/kms_plane_alpha_blend.c | 9 +++++++--
      1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 455

Quoted 9 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
      	igt_crc_t ref_crc = {}, crc = {};
 
      	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
 
 igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 460

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
      	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
      	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
      	igt_display_commit2(display, COMMIT_ATOMIC);
      	igt_pipe_crc_start(data->pipe_crc);
      	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
      	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
      	igt_plane_set_fb(plane, &data->argb_fb_7e);
      	igt_display_commit2(display, COMMIT_ATOMIC);
      	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
      	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
      	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
      	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
      	igt_display_commit2(display, COMMIT_ATOMIC);
      	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
      	igt_assert_crc_equal(&ref_crc, &crc);
 
      	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines

}

static void run_test_on_pipe_planes(data_t *data, enum pipe
pipe, bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#27 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hello Juha-Pekka,

Thank you so much.

Yeah, only alpha value 0 is working in the alpha_gray_fb. But screen is showing for other plane tests also.

If I use black_fb itself instead of gray_fb directly in coverage-vs-premult-vs-constant, it works. But due to black, screen doesn’t show for other planes. It shows black after Testing plane 0. CRC passes.

If I use set_lut, screen looks fine (I commented crc assertion to see). But CRC mismatch shows up.
In the same LUT table, again lut[i].red =0, lut[i].green = 0 and lut[i].blue=0 also CRC passes. Again, for other planes screen shows black.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Wednesday, June 23, 2021 1:12 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hei Vidya,

your overall test result did look green but it is because of some filter in ci which masked out new failures.

If you look at this you see the change did introduce new failures on test you're changing:

https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shards-all.html?testfilter=kms_plane_alpha_blend@pipe-*.-coverage-vs-premult-vs-constant

Then I think there's problem on this (from
https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6):

+ cr = igt_get_cairo_ctx(data->gfx_fd, &data->argb_gray_fb);
+ cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
+ igt_paint_color_alpha(cr, 0, 0, w, h, .5, .5, .5, 0.0);
+ igt_put_cairo_ctx(cr);

you see on igt_paint_color_alpha(..), alpha value is zero. Is that meant to be? I think gray and white with this alpha will look the same as black.

Though, I'm still wondering why didn't masking bits away with gamma fix this. Did you see the screen it was looking ok when you tried using gamma table?

/Juha-Pekka

Quoted 42 lines · Vidya

Hello Juha-Pekka,

Really sorry to bother you again. Kindly check this version please
https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6

I tried pulling the crc start to the beginning and used current crc same way as kms_big_fb. Whatever I do, with regular white fb, I couldn’t get it working even once. I tried normal ARGB white fb too instead of XRGB but that too wont work. I created another gray fb with alpha like the other argb buffers and this seems to work. Both gray and white work. I have kept it gray for now.

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Monday, June 21, 2021 7:03 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hello Juha-Pekka,

Thank you so much. I tried pulling the crc start to the beginning and used current crc same way as kms_big_fb. Whatever I do, with regular white fb, I couldn’t get it working even once (it had worked the other day). I tried normal ARGB white fb too instead of XRGB but that too wont work. I created another gray fb with alpha like the other argb buffers and this seems to work. Both gray and white work. I have kept it gray for now.

Apologies for bothering you. Kindly have a check of this version and suggest please
https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Monday, June 21, 2021 1:35 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 188 lines

That issue where solid white is also failing *sometimes* sound like there maybe two separate issues.

I'd suggest for experimenting try using solid white, move starting of crc counting at the very beginning of the test function and place wait for vblank always before reading crcs. If this will help then the same crc issue which was earlier on kms_big_fb test is also causing problem here.

/Juha-Pekka

Quoted 180 lines · Vidya

Hello Juha-Pekka,

Thank you so much. I tried the LUT table you suggested and it worked
https://patchwork.freedesktop.org/patch/440145/?series=90828&rev=4
Could you kindly check if it is right? 0.25 and 0.75 did not work. 1,1,1 too is failing once in a while.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Saturday, June 19, 2021 8:40 AM
To: Juha-Pekka Heikkilä <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will try out the gamma thing you mentioned and update further.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 1:54 AM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hi Vidya,

I don't now have access to specs so I can't say if there would be something special for JSL on this case. OTOH if changing gray buffer to solid white fixes that maybe good solution, I'm trying to think how the screen will be in this case and I assume test image will remain on screen(?). If just changing gray buffer to solid white make test pass there maybe also 0.25 gray and 0.75 gray which will work. It wouldn't be the first time there is found case with specific color which causes rounding error with crc where it's just more convenient to change that color.

I don't know can it be used in this case but there might be possibility to do gamma table trick if nothing else works. This is used in kms_plane and kms_flip_scaled_crc that come to my mind, in tests/kms_flip_scaled_crc.c look for set_lut(..) function and how it is used.

I'd avoid creating special cases for some hw versions, it will lead to big mess in the end.

/Juha-Pekka

Srinivas, Vidya kirjoitti 18.6.2021 klo 21.54:

Quoted 135 lines

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Fix alpha in coverage-vs-premult-vs-constant

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 93 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
      tests/kms_plane_alpha_blend.c | 9 +++++++--
      1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 455

Quoted 9 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
      	igt_crc_t ref_crc = {}, crc = {};
 
      	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
 
 igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 460

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
      	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
      	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
      	igt_display_commit2(display, COMMIT_ATOMIC);
      	igt_pipe_crc_start(data->pipe_crc);
      	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
      	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
      	igt_plane_set_fb(plane, &data->argb_fb_7e);
      	igt_display_commit2(display, COMMIT_ATOMIC);
      	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
      	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
      	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
      	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
      	igt_display_commit2(display, COMMIT_ATOMIC);
      	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
      	igt_assert_crc_equal(&ref_crc, &crc);
 
      	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines

}

static void run_test_on_pipe_planes(data_t *data, enum pipe
pipe, bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#28 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hello Juha-Pekka,

Once again, sorry for bothering you.
Should I re-run the test again on CI? Is this solution okay? https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6

Or should we simply skip this test for JSL? For that, one patch I need to create.

But positive hope is to get the test PASS than skipping. Kindly suggest. Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Wednesday, June 23, 2021 3:51 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hello Juha-Pekka,

Thank you so much.

Yeah, only alpha value 0 is working in the alpha_gray_fb. But screen is showing for other plane tests also.

If I use black_fb itself instead of gray_fb directly in coverage-vs-premult-vs-constant, it works. But due to black, screen doesn’t show for other planes. It shows black after Testing plane 0. CRC passes.

If I use set_lut, screen looks fine (I commented crc assertion to see). But CRC mismatch shows up.
In the same LUT table, again lut[i].red =0, lut[i].green = 0 and lut[i].blue=0 also CRC passes. Again, for other planes screen shows black.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Wednesday, June 23, 2021 1:12 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hei Vidya,

your overall test result did look green but it is because of some filter in ci which masked out new failures.

If you look at this you see the change did introduce new failures on test you're changing:

https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shards-all.html?testfilter=kms_plane_alpha_blend@pipe-*.-coverage-vs-premult-vs-constant

Then I think there's problem on this (from
https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6):

+ cr = igt_get_cairo_ctx(data->gfx_fd, &data->argb_gray_fb);
+ cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
+ igt_paint_color_alpha(cr, 0, 0, w, h, .5, .5, .5, 0.0);
+ igt_put_cairo_ctx(cr);

you see on igt_paint_color_alpha(..), alpha value is zero. Is that meant to be? I think gray and white with this alpha will look the same as black.

Though, I'm still wondering why didn't masking bits away with gamma fix this. Did you see the screen it was looking ok when you tried using gamma table?

/Juha-Pekka

Quoted 42 lines · Vidya

Hello Juha-Pekka,

Really sorry to bother you again. Kindly check this version please
https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6

I tried pulling the crc start to the beginning and used current crc same way as kms_big_fb. Whatever I do, with regular white fb, I couldn’t get it working even once. I tried normal ARGB white fb too instead of XRGB but that too wont work. I created another gray fb with alpha like the other argb buffers and this seems to work. Both gray and white work. I have kept it gray for now.

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Monday, June 21, 2021 7:03 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hello Juha-Pekka,

Thank you so much. I tried pulling the crc start to the beginning and used current crc same way as kms_big_fb. Whatever I do, with regular white fb, I couldn’t get it working even once (it had worked the other day). I tried normal ARGB white fb too instead of XRGB but that too wont work. I created another gray fb with alpha like the other argb buffers and this seems to work. Both gray and white work. I have kept it gray for now.

Apologies for bothering you. Kindly have a check of this version and suggest please
https://patchwork.freedesktop.org/patch/440263/?series=90828&rev=6

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Monday, June 21, 2021 1:35 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Quoted 188 lines

That issue where solid white is also failing *sometimes* sound like there maybe two separate issues.

I'd suggest for experimenting try using solid white, move starting of crc counting at the very beginning of the test function and place wait for vblank always before reading crcs. If this will help then the same crc issue which was earlier on kms_big_fb test is also causing problem here.

/Juha-Pekka

Quoted 180 lines · Vidya

Hello Juha-Pekka,

Thank you so much. I tried the LUT table you suggested and it worked
https://patchwork.freedesktop.org/patch/440145/?series=90828&rev=4
Could you kindly check if it is right? 0.25 and 0.75 did not work. 1,1,1 too is failing once in a while.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Saturday, June 19, 2021 8:40 AM
To: Juha-Pekka Heikkilä <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will try out the gamma thing you mentioned and update further.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 1:54 AM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Fix alpha in coverage-vs-premult-vs-constant

Hi Vidya,

I don't now have access to specs so I can't say if there would be something special for JSL on this case. OTOH if changing gray buffer to solid white fixes that maybe good solution, I'm trying to think how the screen will be in this case and I assume test image will remain on screen(?). If just changing gray buffer to solid white make test pass there maybe also 0.25 gray and 0.75 gray which will work. It wouldn't be the first time there is found case with specific color which causes rounding error with crc where it's just more convenient to change that color.

I don't know can it be used in this case but there might be possibility to do gamma table trick if nothing else works. This is used in kms_plane and kms_flip_scaled_crc that come to my mind, in tests/kms_flip_scaled_crc.c look for set_lut(..) function and how it is used.

I'd avoid creating special cases for some hw versions, it will lead to big mess in the end.

/Juha-Pekka

Srinivas, Vidya kirjoitti 18.6.2021 klo 21.54:

Quoted 135 lines

Hello Juha-Pekka,

As you said, I guess that might be the problem. But the changes of WA are already present in kernel. I tried reverting them just to check, but did not see any change. If I change the gray buffer (0.5 to 1,1,1) it works. If I comment first primary commit it works. If I just comment "Pre-multiplied" it works, else lower alpha works. Couldn’t find any other changes yet in driver. Would it be okay if I can add a patch to disable primary commit if JASPERLAKE?

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Friday, June 18, 2021 4:01 PM
To: [email protected]; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Fix alpha in coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. I will check on the same and update.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 3:56 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Fix alpha in coverage-vs-premult-vs-constant

Have you tried looking if on kernel side in intel_display.c
icl_set_pipe_chicken(..) those icl related WAs have effect on your crc problem. Sound like setting PER_PIXEL_ALPHA_BYPASS_EN and PIXEL_ROUNDING_TRUNC_FB_PASSTHRU touch exactly the problem you are seeing. Maybe different hw revision behave differently? Try see if there's on spec some note for your HW revision for these WAs.

/Juha-Pekka

Quoted 93 lines · Vidya

Thank you so much Juha-Pekka.

https://patchwork.freedesktop.org/patch/436194/?series=90828&rev=2
just removes the DRM_PLANE_TYPE_PRIMARY fb setting from subtest That works. Would that be an okay change?

Because without the commit after PRIMARY and alpha value 0x7e, JSL is failing. If we just don’t do the PRIMARY fb setting at start, test works as is.

Kindly suggest. Thank you very much once again.

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkila <[email protected]>
Sent: Friday, June 18, 2021 2:23 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Latvala, Petri <[email protected]>; Lin, Charlton <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Fix alpha in coverage-vs-premult-vs-constant

Quoted 16 lines · Vidya Srinivas

Patch sets alpha to 0x7e for coverage, Pre-multiplied and constant as per the buffer being created initially in prepare_crtc. Patch also add commit after setting fb on primary plane. Without this change CRC mismatch is seen on few Gen11 systems.

---
      tests/kms_plane_alpha_blend.c | 9 +++++++--
      1 file changed, 7 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..d3a73cf43fcd 100644

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 455

Quoted 9 lines
tests/kms_plane_alpha_blend.c +2 -1
@@ -448,29 +448,34 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
      	igt_crc_t ref_crc = {}, crc = {};
 
      	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
 
 igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_display_commit2(display, COMMIT_ATOMIC);

Why this extra commit needed? There's just below commit before crc is started

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 460

Quoted 5 lines
tests/kms_plane_alpha_blend.c +2 -0
+	}
 
      	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Coverage");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);

On this test there's already per pixel alpha, setting plane alpha values so low will probably in this case in final rounding make these planes completely invisible. I'd suspect you can get any image pass crc doing it like this. Likely what you see on screen with these values is just pure grey instead of intended test image.

Quoted 13 lines
tests/kms_plane_alpha_blend.c +1 -0
      	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
      	igt_display_commit2(display, COMMIT_ATOMIC);
      	igt_pipe_crc_start(data->pipe_crc);
      	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
      	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, 
 "Pre-multiplied");
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
      	igt_plane_set_fb(plane, &data->argb_fb_7e);
      	igt_display_commit2(display, COMMIT_ATOMIC);
      	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
      	igt_assert_crc_equal(&ref_crc, &crc);
 

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

Quoted 10 lines
tests/kms_plane_alpha_blend.c +2 -1
      	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
-	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
+	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e);
      	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
      	igt_display_commit2(display, COMMIT_ATOMIC);
      	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
      	igt_assert_crc_equal(&ref_crc, &crc);
 
      	igt_pipe_crc_stop(data->pipe_crc);
+

stray new line

Quoted 5 lines

}

static void run_test_on_pipe_planes(data_t *data, enum pipe
pipe, bool blend,

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#29 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Limit pipe output to 8bpc for coverage-vs-premult-vs-constant

In reply to Vidya Srinivas

Few Gen11 systems report CRC mismatch with higher alpha values if primary plane is enabled. So in order to get the coverage vs. premult vs. constant crc to match use legacy LUT to limit pipe output to 8bpc for subtest coverage-vs-premult-vs-constant. Similar thing is done in kms_flip_scaled_crc.

---
 tests/kms_plane_alpha_blend.c | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)
tests/kms_plane_alpha_blend.c +36 -3
index a37cb27c7d62..1e20d9b0778c 100644
@@ -442,20 +442,52 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static void set_lut(data_t *data, enum pipe pipe)
+{
+	igt_pipe_t *pipe_obj = &data->display.pipes[pipe];
+	struct drm_color_lut *lut;
+	drmModeCrtc *crtc;
+	int i, lut_size;
+
+	crtc = drmModeGetCrtc(data->gfx_fd, pipe_obj->crtc_id);
+	lut_size = crtc->gamma_size;
+	drmModeFreeCrtc(crtc);
+	lut = malloc(sizeof(lut[0]) * lut_size);
+	for (i = 0; i < lut_size; i++) {
+		uint16_t v  = (i * 0xffff / (lut_size - 1)) & 0xff00;
+		lut[i].red = v;
+		lut[i].green = v;
+		lut[i].blue = v;
+	}
+	igt_pipe_obj_replace_prop_blob(pipe_obj, IGT_CRTC_GAMMA_LUT,
+				       lut, sizeof(lut[0]) * lut_size);
+	free(lut);
+}
+
+static void clear_lut(data_t *data, enum pipe pipe)
+{
+	igt_pipe_t *pipe_obj = &data->display.pipes[pipe];
+
+	igt_pipe_obj_set_prop_value(pipe_obj, IGT_CRTC_GAMMA_LUT, 0);
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	int i;
 
 	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
+		set_lut(data, pipe);
+		igt_display_commit_atomic(&data->display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+	}
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_start(data->pipe_crc);
-	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
+	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &ref_crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Pre-multiplied");
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
@@ -470,6 +502,7 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
 	igt_assert_crc_equal(&ref_crc, &crc);
 
+	clear_lut(data, pipe);
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#30 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Limit pipe output to 8bpc for coverage-vs-premult-vs-constant

Hi Vidya

Vidya Srinivas kirjoitti 19.6.2021 klo 11.08:

Quoted 42 lines

Few Gen11 systems report CRC mismatch with higher alpha values if primary plane is enabled. So in order to get the coverage vs. premult vs. constant crc to match use legacy LUT to limit pipe output to 8bpc for subtest coverage-vs-premult-vs-constant. Similar thing is done in kms_flip_scaled_crc.

---
  tests/kms_plane_alpha_blend.c | 39 ++++++++++++++++++++++++++++++++++++---
  1 file changed, 36 insertions(+), 3 deletions(-)
tests/kms_plane_alpha_blend.c +24 -0
index a37cb27c7d62..1e20d9b0778c 100644
@@ -442,20 +442,52 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
  	igt_pipe_crc_stop(data->pipe_crc);
  }
 
+static void set_lut(data_t *data, enum pipe pipe)
+{
+	igt_pipe_t *pipe_obj = &data->display.pipes[pipe];
+	struct drm_color_lut *lut;
+	drmModeCrtc *crtc;
+	int i, lut_size;
+
+	crtc = drmModeGetCrtc(data->gfx_fd, pipe_obj->crtc_id);
+	lut_size = crtc->gamma_size;
+	drmModeFreeCrtc(crtc);
+	lut = malloc(sizeof(lut[0]) * lut_size);
+	for (i = 0; i < lut_size; i++) {
+		uint16_t v  = (i * 0xffff / (lut_size - 1)) & 0xff00;
+		lut[i].red = v;
+		lut[i].green = v;
+		lut[i].blue = v;
+	}
+	igt_pipe_obj_replace_prop_blob(pipe_obj, IGT_CRTC_GAMMA_LUT,
+				       lut, sizeof(lut[0]) * lut_size);
+	free(lut);
+}
+
+static void clear_lut(data_t *data, enum pipe pipe)
+{

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 478

Quoted 10 lines
tests/kms_plane_alpha_blend.c +6 -0
+	igt_pipe_t *pipe_obj = &data->display.pipes[pipe];
+
+	igt_pipe_obj_set_prop_value(pipe_obj, IGT_CRTC_GAMMA_LUT, 0);
+}
+
  static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
  {
  	igt_display_t *display = &data->display;
  	igt_crc_t ref_crc = {}, crc = {};
+	int i;

I didn't notice i variable being used

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 452

Quoted 4 lines
tests/kms_plane_alpha_blend.c +0 -2
  	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);

^^
now gray fb background is missing from the test.

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 481

Quoted 2 lines
tests/kms_plane_alpha_blend.c +2 -0
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
+		set_lut(data, pipe); > +		igt_display_commit_atomic(&data->display, 

DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);

Quoted 12 lines
tests/kms_plane_alpha_blend.c +2 -1
+	}
 
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
  	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
  	igt_display_commit2(display, COMMIT_ATOMIC);
  	igt_pipe_crc_start(data->pipe_crc);
-	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
+	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &ref_crc);
 
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Pre-multiplied");
  	igt_plane_set_fb(plane, &data->argb_fb_7e);

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 505

Quoted 4 lines
tests/kms_plane_alpha_blend.c +1 -0
@@ -470,6 +502,7 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
  	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
  	igt_assert_crc_equal(&ref_crc, &crc);
 
+	clear_lut(data, pipe);

You'll need to do commit clearing gamma lut.

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 444

Quoted 4 lines
tests/kms_plane_alpha_blend.c +0 -0
  	igt_pipe_crc_stop(data->pipe_crc);
  }
 

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#31 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Limit pipe output to 8bpc for coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. The moment I add back gray fb, CRC again fails :(

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 2:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: Re: [PATCH i-g-t] tests/kms_plane_alpha_blend: Limit pipe output to 8bpc for coverage-vs-premult-vs-constant

Hi Vidya

Vidya Srinivas kirjoitti 19.6.2021 klo 11.08:

Quoted 40 lines

Few Gen11 systems report CRC mismatch with higher alpha values if
primary plane is enabled. So in order to get the coverage vs. premult
vs. constant crc to match use legacy LUT to limit pipe output to 8bpc
for subtest coverage-vs-premult-vs-constant. Similar thing is done in kms_flip_scaled_crc.

---
  tests/kms_plane_alpha_blend.c | 39 ++++++++++++++++++++++++++++++++++++---
  1 file changed, 36 insertions(+), 3 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..1e20d9b0778c 100644

tests/kms_plane_alpha_blend.c +21 -0
@@ -442,20 +442,52 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
  	igt_pipe_crc_stop(data->pipe_crc);
  }
 
+static void set_lut(data_t *data, enum pipe pipe) {
+	igt_pipe_t *pipe_obj = &data->display.pipes[pipe];
+	struct drm_color_lut *lut;
+	drmModeCrtc *crtc;
+	int i, lut_size;
+
+	crtc = drmModeGetCrtc(data->gfx_fd, pipe_obj->crtc_id);
+	lut_size = crtc->gamma_size;
+	drmModeFreeCrtc(crtc);
+	lut = malloc(sizeof(lut[0]) * lut_size);
+	for (i = 0; i < lut_size; i++) {
+		uint16_t v  = (i * 0xffff / (lut_size - 1)) & 0xff00;
+		lut[i].red = v;
+		lut[i].green = v;
+		lut[i].blue = v;
+	}
+	igt_pipe_obj_replace_prop_blob(pipe_obj, IGT_CRTC_GAMMA_LUT,
+				       lut, sizeof(lut[0]) * lut_size);
+	free(lut);
+}
+

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 475

Quoted 10 lines
tests/kms_plane_alpha_blend.c +6 -0
+static void clear_lut(data_t *data, enum pipe pipe) {
+	igt_pipe_t *pipe_obj = &data->display.pipes[pipe];
+
+	igt_pipe_obj_set_prop_value(pipe_obj, IGT_CRTC_GAMMA_LUT, 0); }
+
  static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
  {
  	igt_display_t *display = &data->display;
  	igt_crc_t ref_crc = {}, crc = {};
+	int i;

I didn't notice i variable being used

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 452

Quoted 4 lines
tests/kms_plane_alpha_blend.c +0 -2
  	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);

^^
now gray fb background is missing from the test.

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 478

Quoted 2 lines
tests/kms_plane_alpha_blend.c +2 -0
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
+		set_lut(data, pipe); > +		igt_display_commit_atomic(&data->display, 

DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);

Quoted 15 lines
tests/kms_plane_alpha_blend.c +2 -1
+	}
 
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
  	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
  	igt_display_commit2(display, COMMIT_ATOMIC);
  	igt_pipe_crc_start(data->pipe_crc);
-	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
+	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &ref_crc);
 
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Pre-multiplied");
  	igt_plane_set_fb(plane, &data->argb_fb_7e); @@ -470,6 +502,7 @@ 

static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc); igt_assert_crc_equal(&ref_crc, &crc);

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 505

Quoted 1 line
tests/kms_plane_alpha_blend.c +1 -0
+	clear_lut(data, pipe);

You'll need to do commit clearing gamma lut.

Quoted 4 lines
  	igt_pipe_crc_stop(data->pipe_crc);
  }

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#32 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Limit pipe output to 8bpc for coverage-vs-premult-vs-constant

Hello Juha-Pekka,

Even if I use set_lut, with gray it gives CRC mismatch for pre-multiplied.

If I use same alpha buffer (argb_fb_cov_7e) in primary, it works.
I have uploaded https://patchwork.freedesktop.org/patch/440157/?series=90828&rev=5
Kindly have a check. Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Saturday, June 19, 2021 5:11 PM
To: Juha-Pekka Heikkilä <[email protected]>; [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: RE: [PATCH i-g-t] tests/kms_plane_alpha_blend: Limit pipe output to 8bpc for coverage-vs-premult-vs-constant

Thank you so much Juha-Pekka. The moment I add back gray fb, CRC again fails :(

Regards
Vidya

-----Original Message-----
From: Juha-Pekka Heikkilä <[email protected]>
Sent: Saturday, June 19, 2021 2:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: Re: [PATCH i-g-t] tests/kms_plane_alpha_blend: Limit pipe output to 8bpc for coverage-vs-premult-vs-constant

Hi Vidya

Vidya Srinivas kirjoitti 19.6.2021 klo 11.08:

Quoted 40 lines

Few Gen11 systems report CRC mismatch with higher alpha values if
primary plane is enabled. So in order to get the coverage vs. premult
vs. constant crc to match use legacy LUT to limit pipe output to 8bpc
for subtest coverage-vs-premult-vs-constant. Similar thing is done in kms_flip_scaled_crc.

---
  tests/kms_plane_alpha_blend.c | 39 ++++++++++++++++++++++++++++++++++++---
  1 file changed, 36 insertions(+), 3 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..1e20d9b0778c 100644

tests/kms_plane_alpha_blend.c +21 -0
@@ -442,20 +442,52 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
  	igt_pipe_crc_stop(data->pipe_crc);
  }
 
+static void set_lut(data_t *data, enum pipe pipe) {
+	igt_pipe_t *pipe_obj = &data->display.pipes[pipe];
+	struct drm_color_lut *lut;
+	drmModeCrtc *crtc;
+	int i, lut_size;
+
+	crtc = drmModeGetCrtc(data->gfx_fd, pipe_obj->crtc_id);
+	lut_size = crtc->gamma_size;
+	drmModeFreeCrtc(crtc);
+	lut = malloc(sizeof(lut[0]) * lut_size);
+	for (i = 0; i < lut_size; i++) {
+		uint16_t v  = (i * 0xffff / (lut_size - 1)) & 0xff00;
+		lut[i].red = v;
+		lut[i].green = v;
+		lut[i].blue = v;
+	}
+	igt_pipe_obj_replace_prop_blob(pipe_obj, IGT_CRTC_GAMMA_LUT,
+				       lut, sizeof(lut[0]) * lut_size);
+	free(lut);
+}
+

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 475

Quoted 10 lines
tests/kms_plane_alpha_blend.c +6 -0
+static void clear_lut(data_t *data, enum pipe pipe) {
+	igt_pipe_t *pipe_obj = &data->display.pipes[pipe];
+
+	igt_pipe_obj_set_prop_value(pipe_obj, IGT_CRTC_GAMMA_LUT, 0); }
+
  static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
  {
  	igt_display_t *display = &data->display;
  	igt_crc_t ref_crc = {}, crc = {};
+	int i;

I didn't notice i variable being used

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 452

Quoted 4 lines
tests/kms_plane_alpha_blend.c +0 -2
  	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);

^^
now gray fb background is missing from the test.

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 478

Quoted 2 lines
tests/kms_plane_alpha_blend.c +2 -0
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
+		set_lut(data, pipe); > +		igt_display_commit_atomic(&data->display, 

DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);

Quoted 15 lines
tests/kms_plane_alpha_blend.c +2 -1
+	}
 
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
  	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
  	igt_display_commit2(display, COMMIT_ATOMIC);
  	igt_pipe_crc_start(data->pipe_crc);
-	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
+	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &ref_crc);
 
  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Pre-multiplied");
  	igt_plane_set_fb(plane, &data->argb_fb_7e); @@ -470,6 +502,7 @@ 

static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc); igt_assert_crc_equal(&ref_crc, &crc);

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 505

Quoted 1 line
tests/kms_plane_alpha_blend.c +1 -0
+	clear_lut(data, pipe);

You'll need to do commit clearing gamma lut.

Quoted 4 lines
  	igt_pipe_crc_stop(data->pipe_crc);
  }

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#33 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Use alpha for primary plane for coverage-vs-premult-vs-constant

In reply to Vidya Srinivas

Few Gen11 systems report CRC mismatch with higher alpha values if
primary plane with gray is enabled. So in order to get the coverage vs. premult vs. constant crc to match use alpha buffer for primary plane as well in coverage-vs-premult-vs-constant.

---
 tests/kms_plane_alpha_blend.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tests/kms_plane_alpha_blend.c +1 -1
index a37cb27c7d62..52c273c71dad 100644
@@ -449,7 +449,7 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->argb_fb_cov_7e);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#34 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Use alpha for primary plane for coverage-vs-premult-vs-constant

Few Gen11 systems report CRC mismatch with higher alpha values if primary plane with gray without alpha is enabled. So in order to get the coverage vs. premult vs. constant crc to match use alpha gray buffer for primary plane as well in coverage-vs-premult-vs-constant.

---
 tests/kms_plane_alpha_blend.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +16 -2
index a37cb27c7d62..ca9e1c3829ba 100644
@@ -31,7 +31,7 @@ IGT_TEST_DESCRIPTION("Test plane alpha and blending mode properties");
 typedef struct {
 	int gfx_fd;
 	igt_display_t display;
-	struct igt_fb xrgb_fb, argb_fb_0, argb_fb_cov_0, argb_fb_7e, argb_fb_cov_7e, argb_fb_fc, argb_fb_cov_fc, argb_fb_100, black_fb, gray_fb;
+	struct igt_fb xrgb_fb, argb_fb_0, argb_fb_cov_0, argb_fb_7e, argb_fb_cov_7e, argb_fb_fc, argb_fb_cov_fc, argb_fb_100, black_fb, gray_fb, argb_gray_fb;
 	igt_crc_t ref_crc;
 	igt_pipe_crc_t *pipe_crc;
 } data_t;
@@ -182,6 +182,7 @@ static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe)
 		igt_remove_fb(data->gfx_fd, &data->argb_fb_100);
 		igt_remove_fb(data->gfx_fd, &data->black_fb);
 		igt_remove_fb(data->gfx_fd, &data->gray_fb);
+		igt_remove_fb(data->gfx_fd, &data->argb_gray_fb);
 
 		igt_create_fb(data->gfx_fd, w, h,
 			      DRM_FORMAT_XRGB8888, LOCAL_DRM_FORMAT_MOD_NONE,
@@ -204,6 +205,15 @@ static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe)
 
 		igt_create_fb(data->gfx_fd, w, h,
 			      DRM_FORMAT_ARGB8888, LOCAL_DRM_FORMAT_MOD_NONE,
+			      &data->argb_gray_fb);
+
+		cr = igt_get_cairo_ctx(data->gfx_fd, &data->argb_gray_fb);
+		cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
+		igt_paint_color_alpha(cr, 0, 0, w, h, .5, .5, .5, 0.0);
+		igt_put_cairo_ctx(cr);
+
+		igt_create_fb(data->gfx_fd, w, h,
+			      DRM_FORMAT_ARGB8888, LOCAL_DRM_FORMAT_MOD_NONE,
 			      &data->argb_fb_7e);
 		draw_squares(&data->argb_fb_7e, w, h, 126. / 255.);
 
@@ -449,7 +459,7 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->argb_gray_fb);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
@@ -471,6 +481,10 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
+
+	igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), NULL);
+	igt_plane_set_fb(plane, NULL);
+	igt_display_commit2(display, COMMIT_ATOMIC);
 }
 
 static void run_test_on_pipe_planes(data_t *data, enum pipe pipe, bool blend,
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#35 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Use black for primary plane for coverage-vs-premult-vs-constant

Few Gen11 systems report CRC mismatch with primaryy gray fb. Use black for primary plane in coverage-vs-premult-vs-constant to get the CRC pass.

---
 tests/kms_plane_alpha_blend.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tests/kms_plane_alpha_blend.c +1 -1
index a37cb27c7d62..f02e50157873 100644
@@ -449,7 +449,7 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->black_fb);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#36 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Intel Gen11 6bpc panels are giving CRC mismatch in coverage-vs-premult-vs-none if primary gray fb is commited before starting alpha tests. Patch removes primar plane commit if device is intel and 6bpc.

---
 tests/kms_plane_alpha_blend.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +34 -2
index a37cb27c7d62..5f0a8cb070dd 100644
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include <string.h>
 
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode properties");
 
@@ -442,14 +443,45 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display)
+{
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (strncmp(str, "bpp=18", 6) == 0)
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
 
+
 	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
+		if (!is_6bpc(display))
+			igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
+						DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+	}
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#37 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Hello,

We checked that the same test works on a different Jasperlake system which has 8bpc. Our device has 6bpc panel and dithering is ON. Can we use this patch as solution? If any one has a 6bpc panel, can you kindly let us know if its working for you? Thank you so much.

The same test works on HDMI connected to the system, just fails on the eDP which is 6bpc.

https://patchwork.freedesktop.org/patch/442435/?series=90828&rev=8

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Saturday, July 3, 2021 9:23 PM
To: [email protected]
Cc: Srinivas, Vidya <[email protected]>
Subject: [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Intel Gen11 6bpc panels are giving CRC mismatch in coverage-vs-premult-vs-none if primary gray fb is commited before starting alpha tests. Patch removes primar plane commit if device is intel and 6bpc.

---
 tests/kms_plane_alpha_blend.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +34 -3
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include <string.h>
 
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode properties");
 
@@ -442,14 +443,45 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, 
+sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (strncmp(str, "bpp=18", 6) == 0)
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)  {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
 
+
 	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
+		if (!is_6bpc(display))
+			igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
+						DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+	}
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
--

2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#38 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Quoted 15 lines

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Monday, July 5, 2021 8:08 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>; Heikkila, Juha-pekka <juha- [email protected]>; [email protected]; Latvala, Petri <[email protected]>; Almahallawy, Khaled <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Hello,

Quoted 7 lines

We checked that the same test works on a different Jasperlake system which has 8bpc. Our device has 6bpc panel and dithering is ON.
Can we use this patch as solution? If any one has a 6bpc panel, can you kindly let us know if its working for you? Thank you so much.

The same test works on HDMI connected to the system, just fails on the eDP which is 6bpc.

Hi Vidya,
Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering. So let's have this test skip on 6bpc panels instead of relying on this empirical result.

Just have a test condition igt_require in the beginning (see reference usage of that in IGT).

Regards,
Uma Shankar

Quoted 85 lines

https://patchwork.freedesktop.org/patch/442435/?series=90828&rev=8

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Saturday, July 3, 2021 9:23 PM
To: [email protected]
Cc: Srinivas, Vidya <[email protected]>
Subject: [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Intel Gen11 6bpc panels are giving CRC mismatch in coverage-vs-premult-vs-none if primary gray fb is commited before starting alpha tests. Patch removes primar plane commit if device is intel and 6bpc.

---
 tests/kms_plane_alpha_blend.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c index renamed from tests/kms_plane_alpha_blend.c +0 -0

a37cb27c7d62..5f0a8cb070dd 100644

tests/kms_plane_alpha_blend.c +33 -2
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include <string.h>
 
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode properties");
 
@@ -442,14 +443,45 @@ static void coverage_7efc(data_t *data, enum pipe pipe,
 igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
+sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (strncmp(str, "bpp=18", 6) == 0)
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 *plane)  {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
 
+
 	/* Set a background color on the primary fb for testing */
-	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
-		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
 DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
+	if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
+		if (!is_6bpc(display))
+			igt_plane_set_fb(igt_pipe_get_plane_type(&display-
 >pipes[pipe],
+						DRM_PLANE_TYPE_PRIMARY),

&data->gray_fb);

tests/kms_plane_alpha_blend.c +1 -0
+	}
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
Quoted 5 lines

"Coverage");
igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
--
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#39 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Thank you so much Uma. This was very helpful. I shall do the same.

Regards
Vidya

-----Original Message-----
From: Shankar, Uma <[email protected]>
Sent: Tuesday, July 6, 2021 12:37 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Heikkila, Juha-pekka <[email protected]>; [email protected]; Latvala, Petri <[email protected]>; Almahallawy, Khaled <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Quoted 13 lines

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Monday, July 5, 2021 8:08 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>; Heikkila, Juha-pekka <juha- [email protected]>; [email protected]; Latvala, Petri <[email protected]>; Almahallawy, Khaled <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Hello,

Quoted 7 lines

We checked that the same test works on a different Jasperlake system which has 8bpc. Our device has 6bpc panel and dithering is ON. Can we use this patch as solution? If any one has a 6bpc panel, can you kindly let us know if its working for you? Thank you so much.

The same test works on HDMI connected to the system, just fails on the eDP which is 6bpc.

Hi Vidya,
Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering. So let's have this test skip on 6bpc panels instead of relying on this empirical result.

Just have a test condition igt_require in the beginning (see reference usage of that in IGT).

Regards,
Uma Shankar

Quoted 79 lines

https://patchwork.freedesktop.org/patch/442435/?series=90828&rev=8

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Saturday, July 3, 2021 9:23 PM
To: [email protected]
Cc: Srinivas, Vidya <[email protected]>
Subject: [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Intel Gen11 6bpc panels are giving CRC mismatch in coverage-vs-premult-vs-none if primary gray fb is commited before starting alpha tests. Patch removes primar plane commit if device is intel and 6bpc.

---
 tests/kms_plane_alpha_blend.c | 36 
++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..5f0a8cb070dd 100644

tests/kms_plane_alpha_blend.c +25 -0
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include <string.h>
 
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode 
 properties");
@@ -442,14 +443,45 @@ static void coverage_7efc(data_t *data, enum 
 pipe pipe, igt_plane_t *plane)  igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display) { char buf[4096]; char 
+*str; bool ret; int debugfs_fd;
+
+if (!is_i915_device(display->drm_fd))
+return false;
+
+debugfs_fd = igt_debugfs_dir(display->drm_fd);
+
+if (debugfs_fd < 0)
+return false;
+
+igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, 
+sizeof(buf));
+
+str = strstr(buf, "bpp=");
+if (strncmp(str, "bpp=18", 6) == 0)
+ret = true;
+else
+ret = false;
+
+close(debugfs_fd);
+return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, 

igt_plane_t
*plane) {
igt_display_t *display = &data->display; igt_crc_t ref_crc = {}, crc
= {};

+
/* Set a background color on the primary fb for testing */ -if
(plane->type != DRM_PLANE_TYPE_PRIMARY) -igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);

tests/kms_plane_alpha_blend.c +2 -0
+if (plane->type != DRM_PLANE_TYPE_PRIMARY) { if (!is_6bpc(display))
+igt_plane_set_fb(igt_pipe_get_plane_type(&display-
Quoted 1 line

pipes[pipe],

Quoted 9 lines

+DRM_PLANE_TYPE_PRIMARY),
&data->gray_fb);
+}

igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
"Coverage"); igt_plane_set_fb(plane, &data->argb_fb_cov_7e); --
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#40 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

In reply to Shankar, Uma

Hello Uma,

I have submitted this patch https://patchwork.freedesktop.org/patch/442724/?series=90828&rev=10
I read the EDID and get bpc and skip if < 8. I have used igt_require.

I tried using existing MAX_BPC get property but that did not get current bpc from kernel.

I have tested this patch on eDP which skipped and HDMI which PASSED. Kindly have a check of this patch and suggest. Thanks a lot.

Regards
Vidya

-----Original Message-----
From: Shankar, Uma <[email protected]>
Sent: Tuesday, July 6, 2021 12:37 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Cc: Heikkila, Juha-pekka <[email protected]>; [email protected]; Latvala, Petri <[email protected]>; Almahallawy, Khaled <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Quoted 13 lines

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Monday, July 5, 2021 8:08 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>; Heikkila, Juha-pekka <juha- [email protected]>; [email protected]; Latvala, Petri <[email protected]>; Almahallawy, Khaled <[email protected]>; Lin, Charlton <[email protected]>
Subject: RE: [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Hello,

Quoted 7 lines

We checked that the same test works on a different Jasperlake system which has 8bpc. Our device has 6bpc panel and dithering is ON. Can we use this patch as solution? If any one has a 6bpc panel, can you kindly let us know if its working for you? Thank you so much.

The same test works on HDMI connected to the system, just fails on the eDP which is 6bpc.

Hi Vidya,
Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering. So let's have this test skip on 6bpc panels instead of relying on this empirical result.

Just have a test condition igt_require in the beginning (see reference usage of that in IGT).

Regards,
Uma Shankar

Quoted 79 lines

https://patchwork.freedesktop.org/patch/442435/?series=90828&rev=8

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Saturday, July 3, 2021 9:23 PM
To: [email protected]
Cc: Srinivas, Vidya <[email protected]>
Subject: [PATCH i-g-t] tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none

Intel Gen11 6bpc panels are giving CRC mismatch in coverage-vs-premult-vs-none if primary gray fb is commited before starting alpha tests. Patch removes primar plane commit if device is intel and 6bpc.

---
 tests/kms_plane_alpha_blend.c | 36 
++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..5f0a8cb070dd 100644

tests/kms_plane_alpha_blend.c +25 -0
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include <string.h>
 
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode 
 properties");
@@ -442,14 +443,45 @@ static void coverage_7efc(data_t *data, enum 
 pipe pipe, igt_plane_t *plane)  igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display) { char buf[4096]; char 
+*str; bool ret; int debugfs_fd;
+
+if (!is_i915_device(display->drm_fd))
+return false;
+
+debugfs_fd = igt_debugfs_dir(display->drm_fd);
+
+if (debugfs_fd < 0)
+return false;
+
+igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, 
+sizeof(buf));
+
+str = strstr(buf, "bpp=");
+if (strncmp(str, "bpp=18", 6) == 0)
+ret = true;
+else
+ret = false;
+
+close(debugfs_fd);
+return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, 

igt_plane_t
*plane) {
igt_display_t *display = &data->display; igt_crc_t ref_crc = {}, crc
= {};

+
/* Set a background color on the primary fb for testing */ -if
(plane->type != DRM_PLANE_TYPE_PRIMARY) -igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe], DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);

tests/kms_plane_alpha_blend.c +2 -0
+if (plane->type != DRM_PLANE_TYPE_PRIMARY) { if (!is_6bpc(display))
+igt_plane_set_fb(igt_pipe_get_plane_type(&display-
Quoted 1 line

pipes[pipe],

Quoted 9 lines

+DRM_PLANE_TYPE_PRIMARY),
&data->gray_fb);
+}

igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,
"Coverage"); igt_plane_set_fb(plane, &data->argb_fb_cov_7e); --
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#41 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

In reply to Vidya Srinivas

Intel Gen11 6bpc panels are giving CRC mismatch in coverage-vs-premult-vs-none 6bpc panel has dithering ON and CRC test with dithering ON might result in mismatch. Hence, skipping this subtest for 6bpc panels.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
tests/kms_plane_alpha_blend.c +29 -0
index a37cb27c7d62..7f9738545f0a 100644
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include "igt_edid.h"
 
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode properties");
 
@@ -442,10 +443,38 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+uint8_t get_edid_bpc(data_t *data, igt_output_t *output)
+{
+	bool ok;
+	uint64_t edid_blob_id;
+	drmModePropertyBlobRes *edid_blob;
+	const struct edid *edid;
+
+	ok = kmstest_get_property(data->gfx_fd, output->id,
+			DRM_MODE_OBJECT_CONNECTOR, "EDID",
+			NULL, &edid_blob_id, NULL);
+
+	if (!ok || !edid_blob_id)
+		return 0;
+
+	edid_blob = drmModeGetPropertyBlob(data->gfx_fd, edid_blob_id);
+	igt_assert(edid_blob);
+
+	edid = (const struct edid *) edid_blob->data;
+	igt_assert(edid);
+
+	drmModeFreePropertyBlob(edid_blob);
+	return ((edid->input & 0x70) >> 3) + 4;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+	uint8_t current_bpc = get_edid_bpc(data, output);
+
+	igt_require(current_bpc >= 8);
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#42 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Skip crc in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 6bpc panels are giving CRC mismatch in coverage-vs-premult-vs-none 6bpc panel has dithering ON and CRC test with dithering ON might result in mismatch. Hence, skipping CRC assertion for 6bpc panels.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 39 +++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +37 -2
index a37cb27c7d62..536d96546608 100644
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include <string.h>
 
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode properties");
 
@@ -442,10 +443,41 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	drmModeConnector *c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
@@ -461,14 +493,17 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	if (is_6bpc(display, pipe) == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+	if (is_6bpc(display, pipe) == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
Signature · 6 lines
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Reviewed-by on v1 1/1
#43 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc in coverage-vs-premult-vs-none for 6bpc panels

Quoted 77 lines

-----Original Message-----
From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Wednesday, July 7, 2021 9:53 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc in coverage- vs-premult-vs-none for 6bpc panels

Intel Gen11 6bpc panels are giving CRC mismatch in coverage-vs-premult-vs-none 6bpc panel has dithering ON and CRC test with dithering ON might result in mismatch. Hence, skipping CRC assertion for 6bpc panels.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 39 +++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c index renamed from tests/kms_plane_alpha_blend.c +0 -0

a37cb27c7d62..536d96546608 100644

tests/kms_plane_alpha_blend.c +33 -0
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include <string.h>
 
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode properties");
 
@@ -442,10 +443,41 @@ static void coverage_7efc(data_t *data, enum pipe pipe,
 igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	drmModeConnector *c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
+sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 *plane)  {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,17 @@

static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 496

Quoted 5 lines
tests/kms_plane_alpha_blend.c +1 -1
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+

Add a comment here as well explaining the reasoning.

With this added, till we get a better way of reporting current bpc, this looks ok to me in the interim.

Quoted 18 lines
tests/kms_plane_alpha_blend.c +2 -0
+	if (is_6bpc(display, pipe) == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,

"None");

tests/kms_plane_alpha_blend.c +2 -2
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+	if (is_6bpc(display, pipe) == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#44 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

In reply to Vidya Srinivas

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43 +++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +41 -2
index a37cb27c7d62..8f5016b83632 100644
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include <string.h>
 
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode properties");
 
@@ -442,10 +443,41 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	drmModeConnector *c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
@@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc check */
+	is6bpc = is_6bpc(display, pipe);
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc check */
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
Signature · 6 lines
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#45 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43 +++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +41 -2
index a37cb27c7d62..e450e64cb105 100644
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
@@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc check */
+	is6bpc = is_6bpc(display, pipe);
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc check */
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
Signature · 6 lines
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#46 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 86 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better
way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43 +++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +32 -0
index a37cb27c7d62..e450e64cb105 100644
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum pipe pipe,
 igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe,
 igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;
tests/kms_plane_alpha_blend.c +0 -0
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
@@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum

pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +2 -1
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc

check */

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 500

Quoted 3 lines
tests/kms_plane_alpha_blend.c +3 -0
+	is6bpc = is_6bpc(display, pipe);
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as SKIP.

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) == 11)

	igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");
Quoted 18 lines
tests/kms_plane_alpha_blend.c +2 -1
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#47 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test. Kindly suggest further.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 87 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43 
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +33 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum 
 pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, 
+pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, 
 igt_plane_t *plane)  {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@ 

static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +2 -1
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc

check */

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 500

Quoted 3 lines
tests/kms_plane_alpha_blend.c +3 -0
+	is6bpc = is_6bpc(display, pipe);
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as SKIP.

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) == 11)

	igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");
Quoted 18 lines
tests/kms_plane_alpha_blend.c +2 -1
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#48 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 7 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 5 lines

Hello Bhanu,

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test.
Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

Quoted 132 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 87 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +33 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum
 pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display,
+pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe,
 igt_plane_t *plane)  {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@

static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +2 -1
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc

check */

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 500

Quoted 3 lines
tests/kms_plane_alpha_blend.c +3 -0
+	is6bpc = is_6bpc(display, pipe);
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as SKIP.

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) == 11)

	igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");
Quoted 18 lines
tests/kms_plane_alpha_blend.c +2 -1
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 4 lines
Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#49 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hi Bhanu,

Sure, I can skip the test as well. Whichever way is okay. The only requirement is atleast one commit has to be done, so that bpp shows up. Kindly suggest.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 5:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 7 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 5 lines

Hello Bhanu,

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test.
Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

Quoted 136 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 88 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +33 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum 
 pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display,
+pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, 
 igt_plane_t *plane)  {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@ 

static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +3 -1
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 500

Quoted 3 lines
tests/kms_plane_alpha_blend.c +3 -0
+	is6bpc = is_6bpc(display, pipe);
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as SKIP.

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) == 11)
igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc
panels\n");

Quoted 19 lines
tests/kms_plane_alpha_blend.c +3 -1
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 4 lines
Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#50 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

I have submitted the patch with skipping test also. Kindly check, which ever version is okay for merge is fine. Thank you so much.

https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Thursday, July 8, 2021 6:14 PM
To: Modem, Bhanuprakash <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hi Bhanu,

Sure, I can skip the test as well. Whichever way is okay. The only requirement is atleast one commit has to be done, so that bpp shows up. Kindly suggest.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 5:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 7 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 5 lines

Hello Bhanu,

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test.
Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

Quoted 136 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 88 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +33 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum 
 pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display,
+pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, 
 igt_plane_t *plane)  {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@ 

static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +3 -1
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 500

Quoted 3 lines
tests/kms_plane_alpha_blend.c +3 -0
+	is6bpc = is_6bpc(display, pipe);
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as SKIP.

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) == 11)
igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc
panels\n");

Quoted 19 lines
tests/kms_plane_alpha_blend.c +3 -1
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 4 lines
Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#51 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

In reply to Modem, Bhanuprakash
Quoted 19 lines

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 5:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 9 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Quoted 8 lines
Quoted 3 lines

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test.
Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

I think it's a compromise here, skip on 6bpc would be ideal here or we need to have some passing criterion in order to declare this as pass.

We can do the bpc check after the first commit and skip there itself if we detect 6bpc.This should be better given the constraints. Also Vidya its good to add MIPI_DSI along with eDP as well since we have some 6bpc MIPI DSI panels as well.

Quoted 137 lines
Quoted 110 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 88 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +33 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum
 pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display,
+pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe,
 igt_plane_t *plane)  {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@

static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +3 -1
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip
+crc

check */

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 500

Quoted 3 lines
tests/kms_plane_alpha_blend.c +3 -0
+	is6bpc = is_6bpc(display, pipe);
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as SKIP.

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 9 lines

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) == 11)
igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc
panels\n");

Quoted 2 lines

igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,

"None");

Quoted 17 lines
Quoted 17 lines
tests/kms_plane_alpha_blend.c +3 -1
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip
+crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+	if (is6bpc == false)
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#52 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma,

Sure, I have already submitted skipping test itself https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14
I will add DSI also the same and re-submit. Thank you so much.

Regards
Vidya

-----Original Message-----
From: Shankar, Uma <[email protected]>
Sent: Thursday, July 8, 2021 7:05 PM
To: Modem, Bhanuprakash <[email protected]>; Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 17 lines

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 5:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 9 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Quoted 8 lines
Quoted 3 lines

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test.
Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

I think it's a compromise here, skip on 6bpc would be ideal here or we need to have some passing criterion in order to declare this as pass.

We can do the bpc check after the first commit and skip there itself if we detect 6bpc.This should be better given the constraints. Also Vidya its good to add MIPI_DSI along with eDP as well since we have some 6bpc MIPI DSI panels as well.

Quoted 128 lines
Quoted 101 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 78 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +25 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum 
 pipe pipe, igt_plane_t *plane)  igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) { 
+char buf[4096]; char *str; bool ret; int debugfs_fd; 
+drmModeConnector *c; igt_output_t *output = 
+igt_get_single_output_for_pipe(display,
+pipe);
+
+if (!is_i915_device(display->drm_fd))
+return false;
+
+c = output->config.connector;
+if (c->connector_type != DRM_MODE_CONNECTOR_eDP) return false;
+
+debugfs_fd = igt_debugfs_dir(display->drm_fd); if (debugfs_fd < 
+0) return false;
+
+igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+str = strstr(buf, "bpp=");
+if (str && (strncmp(str, "bpp=18", 6) == 0)) ret = true; else ret 
+= false;
+
+close(debugfs_fd);
+return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe 

pipe, igt_plane_t *plane) { igt_display_t *display = &data->display; igt_crc_t ref_crc = {}, crc = {}; +bool is6bpc = false;

/* Set a background color on the primary fb for testing */ if
(plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t igt_plane_set_fb(plane, &data->argb_fb_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 500

Quoted 3 lines
tests/kms_plane_alpha_blend.c +3 -0
+is6bpc = is_6bpc(display, pipe);
+if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as SKIP.

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 9 lines

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) == 11) igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 2 lines

igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,

"None");

Quoted 17 lines
Quoted 17 lines

igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
igt_plane_set_fb(plane, &data->argb_fb_cov_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);
 
 igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#53 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma/Bhanu,

https://patchwork.freedesktop.org/patch/443212/?series=90828&rev=15 I have submitted the patch with adding DSI and skipping the test. Kindly check and approve if okay.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Thursday, July 8, 2021 7:44 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma,

Sure, I have already submitted skipping test itself https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14
I will add DSI also the same and re-submit. Thank you so much.

Regards
Vidya

-----Original Message-----
From: Shankar, Uma <[email protected]>
Sent: Thursday, July 8, 2021 7:05 PM
To: Modem, Bhanuprakash <[email protected]>; Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 17 lines

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 5:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 9 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Quoted 8 lines
Quoted 3 lines

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test.
Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

I think it's a compromise here, skip on 6bpc would be ideal here or we need to have some passing criterion in order to declare this as pass.

We can do the bpc check after the first commit and skip there itself if we detect 6bpc.This should be better given the constraints. Also Vidya its good to add MIPI_DSI along with eDP as well since we have some 6bpc MIPI DSI panels as well.

Quoted 128 lines
Quoted 101 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 78 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +25 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum 
 pipe pipe, igt_plane_t *plane)  igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) { 
+char buf[4096]; char *str; bool ret; int debugfs_fd; 
+drmModeConnector *c; igt_output_t *output = 
+igt_get_single_output_for_pipe(display,
+pipe);
+
+if (!is_i915_device(display->drm_fd))
+return false;
+
+c = output->config.connector;
+if (c->connector_type != DRM_MODE_CONNECTOR_eDP) return false;
+
+debugfs_fd = igt_debugfs_dir(display->drm_fd); if (debugfs_fd < 
+0) return false;
+
+igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+str = strstr(buf, "bpp=");
+if (str && (strncmp(str, "bpp=18", 6) == 0)) ret = true; else ret 
+= false;
+
+close(debugfs_fd);
+return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe 

pipe, igt_plane_t *plane) { igt_display_t *display = &data->display; igt_crc_t ref_crc = {}, crc = {}; +bool is6bpc = false;

/* Set a background color on the primary fb for testing */ if
(plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t igt_plane_set_fb(plane, &data->argb_fb_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 500

Quoted 3 lines
tests/kms_plane_alpha_blend.c +3 -0
+is6bpc = is_6bpc(display, pipe);
+if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as SKIP.

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 9 lines

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) == 11) igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 2 lines

igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,

"None");

Quoted 17 lines
Quoted 17 lines

igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
igt_plane_set_fb(plane, &data->argb_fb_cov_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);
 
 igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#54 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hi Vidya,

Can you please address the comments in rev 14: https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14

Thanks,
Bhanu

Quoted 207 lines

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 7:49 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma/Bhanu,

https://patchwork.freedesktop.org/patch/443212/?series=90828&rev=15 I have submitted the patch with adding DSI and skipping the test. Kindly check and approve if okay.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Thursday, July 8, 2021 7:44 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma,

Sure, I have already submitted skipping test itself
https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14
I will add DSI also the same and re-submit. Thank you so much.

Regards
Vidya

-----Original Message-----
From: Shankar, Uma <[email protected]>
Sent: Thursday, July 8, 2021 7:05 PM
To: Modem, Bhanuprakash <[email protected]>; Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 17 lines

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 5:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 9 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Quoted 8 lines
Quoted 3 lines

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test.
Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

I think it's a compromise here, skip on 6bpc would be ideal here or we need to have some passing criterion in order to declare this as pass.

We can do the bpc check after the first commit and skip there itself if we detect 6bpc.This should be better given the constraints. Also Vidya its good to add MIPI_DSI along with eDP as well since we have some 6bpc MIPI DSI panels as well.

Quoted 96 lines
Quoted 96 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 78 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +25 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum
 pipe pipe, igt_plane_t *plane)  igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+char buf[4096]; char *str; bool ret; int debugfs_fd;
+drmModeConnector *c; igt_output_t *output =
+igt_get_single_output_for_pipe(display,
+pipe);
+
+if (!is_i915_device(display->drm_fd))
+return false;
+
+c = output->config.connector;
+if (c->connector_type != DRM_MODE_CONNECTOR_eDP) return false;
+
+debugfs_fd = igt_debugfs_dir(display->drm_fd); if (debugfs_fd <
+0) return false;
+
+igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+str = strstr(buf, "bpp=");
+if (str && (strncmp(str, "bpp=18", 6) == 0)) ret = true; else ret
+= false;
+
+close(debugfs_fd);
+return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe

pipe, igt_plane_t *plane) { igt_display_t *display = &data->display; igt_crc_t ref_crc = {}, crc = {}; +bool is6bpc = false;

/* Set a background color on the primary fb for testing */ if
(plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t igt_plane_set_fb(plane, &data->argb_fb_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip
+crc

check */

tests/kms_plane_alpha_blend.c

Quoted 3 lines
tests/kms_plane_alpha_blend.c +3 -0
+is6bpc = is_6bpc(display, pipe);
+if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as

SKIP.

Quoted 32 lines
Quoted 5 lines

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 9 lines

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) == 11) igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 2 lines

igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,

"None");

Quoted 17 lines
Quoted 17 lines

igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
igt_plane_set_fb(plane, &data->argb_fb_cov_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip
+crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);
 
 igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#55 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Very sorry Bhanu, I missed seeing your comments before submitting. Apologies. Please find them fixed here.

https://patchwork.freedesktop.org/patch/443213/?series=90828&rev=16

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 7:51 PM
To: Srinivas, Vidya <[email protected]>; Shankar, Uma <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hi Vidya,

Can you please address the comments in rev 14: https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14

Thanks,
Bhanu

Quoted 209 lines

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 7:49 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma/Bhanu,

https://patchwork.freedesktop.org/patch/443212/?series=90828&rev=15 I have submitted the patch with adding DSI and skipping the test. Kindly check and approve if okay.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Thursday, July 8, 2021 7:44 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma,

Sure, I have already submitted skipping test itself
https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14
I will add DSI also the same and re-submit. Thank you so much.

Regards
Vidya

-----Original Message-----
From: Shankar, Uma <[email protected]>
Sent: Thursday, July 8, 2021 7:05 PM
To: Modem, Bhanuprakash <[email protected]>; Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 17 lines

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 5:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 9 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Quoted 8 lines
Quoted 3 lines

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test.
Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

I think it's a compromise here, skip on 6bpc would be ideal here or we need to have some passing criterion in order to declare this as pass.

We can do the bpc check after the first commit and skip there itself if we detect 6bpc.This should be better given the constraints. Also Vidya its good to add MIPI_DSI along with eDP as well since we have some 6bpc MIPI DSI panels as well.

Quoted 98 lines
Quoted 98 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 80 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +25 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, 
 enum pipe pipe, igt_plane_t *plane)  
 igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) { 
+char buf[4096]; char *str; bool ret; int debugfs_fd; 
+drmModeConnector *c; igt_output_t *output = 
+igt_get_single_output_for_pipe(display,
+pipe);
+
+if (!is_i915_device(display->drm_fd))
+return false;
+
+c = output->config.connector;
+if (c->connector_type != DRM_MODE_CONNECTOR_eDP) return false;
+
+debugfs_fd = igt_debugfs_dir(display->drm_fd); if (debugfs_fd <
+0) return false;
+
+igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+str = strstr(buf, "bpp=");
+if (str && (strncmp(str, "bpp=18", 6) == 0)) ret = true; else 
+ret = false;
+
+close(debugfs_fd);
+return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe 

pipe, igt_plane_t *plane) { igt_display_t *display = &data->display; igt_crc_t ref_crc = {}, crc = {}; +bool is6bpc = false;

/* Set a background color on the primary fb for testing */ if
(plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t igt_plane_set_fb(plane, &data->argb_fb_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c

Quoted 2 lines
tests/kms_plane_alpha_blend.c +2 -0
+is6bpc = is_6bpc(display, pipe); if (is6bpc == false) 
+igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as

SKIP.

Quoted 32 lines
Quoted 5 lines

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 9 lines

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) ==
11) igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 2 lines

igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,

"None");

Quoted 17 lines
Quoted 17 lines

igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
igt_plane_set_fb(plane, &data->argb_fb_cov_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);
 
 igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#56 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Could you kindly check if rev 16 is okay for merge? Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Thursday, July 8, 2021 7:56 PM
To: Modem, Bhanuprakash <[email protected]>; Shankar, Uma <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Very sorry Bhanu, I missed seeing your comments before submitting. Apologies. Please find them fixed here.

https://patchwork.freedesktop.org/patch/443213/?series=90828&rev=16

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 7:51 PM
To: Srinivas, Vidya <[email protected]>; Shankar, Uma <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hi Vidya,

Can you please address the comments in rev 14: https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14

Thanks,
Bhanu

Quoted 209 lines

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 7:49 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma/Bhanu,

https://patchwork.freedesktop.org/patch/443212/?series=90828&rev=15 I have submitted the patch with adding DSI and skipping the test. Kindly check and approve if okay.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Thursday, July 8, 2021 7:44 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma,

Sure, I have already submitted skipping test itself
https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14
I will add DSI also the same and re-submit. Thank you so much.

Regards
Vidya

-----Original Message-----
From: Shankar, Uma <[email protected]>
Sent: Thursday, July 8, 2021 7:05 PM
To: Modem, Bhanuprakash <[email protected]>; Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 17 lines

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 5:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 9 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Quoted 8 lines
Quoted 3 lines

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test.
Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

I think it's a compromise here, skip on 6bpc would be ideal here or we need to have some passing criterion in order to declare this as pass.

We can do the bpc check after the first commit and skip there itself if we detect 6bpc.This should be better given the constraints. Also Vidya its good to add MIPI_DSI along with eDP as well since we have some 6bpc MIPI DSI panels as well.

Quoted 98 lines
Quoted 98 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 80 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +25 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, 
 enum pipe pipe, igt_plane_t *plane) 
 igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) { 
+char buf[4096]; char *str; bool ret; int debugfs_fd; 
+drmModeConnector *c; igt_output_t *output = 
+igt_get_single_output_for_pipe(display,
+pipe);
+
+if (!is_i915_device(display->drm_fd))
+return false;
+
+c = output->config.connector;
+if (c->connector_type != DRM_MODE_CONNECTOR_eDP) return false;
+
+debugfs_fd = igt_debugfs_dir(display->drm_fd); if (debugfs_fd <
+0) return false;
+
+igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+str = strstr(buf, "bpp=");
+if (str && (strncmp(str, "bpp=18", 6) == 0)) ret = true; else 
+ret = false;
+
+close(debugfs_fd);
+return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe 

pipe, igt_plane_t *plane) { igt_display_t *display = &data->display; igt_crc_t ref_crc = {}, crc = {}; +bool is6bpc = false;

/* Set a background color on the primary fb for testing */ if
(plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t igt_plane_set_fb(plane, &data->argb_fb_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c

Quoted 2 lines
tests/kms_plane_alpha_blend.c +2 -0
+is6bpc = is_6bpc(display, pipe); if (is6bpc == false) 
+igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as

SKIP.

Quoted 32 lines
Quoted 5 lines

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 9 lines

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) ==
11) igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 2 lines

igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,

"None");

Quoted 17 lines
Quoted 17 lines

igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
igt_plane_set_fb(plane, &data->argb_fb_cov_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip 
+crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);
 
 igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#57 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hi Vidya,

Overall it looks good, but I have one minor suggestion. Otherwise we are good to go.

+ /* 6bpc panels have dithering ON and CRC might fail, hence skip test */
+ igt_require(is_6bpc(display, pipe) == false);

It would be good if we print some useful message on skipping the test, so that user can aware of that skip.

Please try with below snippet:
igt_require_f(!is_6bpc(display, pipe), "Your message\n");

Thanks,
Bhanu

Quoted 40 lines

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Friday, July 9, 2021 11:52 AM
To: Modem, Bhanuprakash <[email protected]>; Shankar, Uma <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Could you kindly check if rev 16 is okay for merge? Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Thursday, July 8, 2021 7:56 PM
To: Modem, Bhanuprakash <[email protected]>; Shankar, Uma <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Very sorry Bhanu, I missed seeing your comments before submitting. Apologies. Please find them fixed here.

https://patchwork.freedesktop.org/patch/443213/?series=90828&rev=16

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 7:51 PM
To: Srinivas, Vidya <[email protected]>; Shankar, Uma <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 223 lines

Hi Vidya,

Can you please address the comments in rev 14:
https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14

Thanks,
Bhanu

Quoted 214 lines

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 7:49 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma/Bhanu,

https://patchwork.freedesktop.org/patch/443212/?series=90828&rev=15 I have submitted the patch with adding DSI and skipping the test. Kindly check and approve if okay.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Thursday, July 8, 2021 7:44 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma,

Sure, I have already submitted skipping test itself
https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14
I will add DSI also the same and re-submit. Thank you so much.

Regards
Vidya

-----Original Message-----
From: Shankar, Uma <[email protected]>
Sent: Thursday, July 8, 2021 7:05 PM
To: Modem, Bhanuprakash <[email protected]>; Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 17 lines

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 5:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 9 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Quoted 8 lines
Quoted 3 lines

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test.
Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

I think it's a compromise here, skip on 6bpc would be ideal here or we need to have some passing criterion in order to declare this as pass.

We can do the bpc check after the first commit and skip there itself if we detect 6bpc.This should be better given the constraints. Also Vidya its good to add MIPI_DSI along with eDP as well since we have some 6bpc MIPI DSI panels as well.

Quoted 98 lines
Quoted 98 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 80 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..e450e64cb105 100644

tests/kms_plane_alpha_blend.c +25 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data,
 enum pipe pipe, igt_plane_t *plane)
 igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+char buf[4096]; char *str; bool ret; int debugfs_fd;
+drmModeConnector *c; igt_output_t *output =
+igt_get_single_output_for_pipe(display,
+pipe);
+
+if (!is_i915_device(display->drm_fd))
+return false;
+
+c = output->config.connector;
+if (c->connector_type != DRM_MODE_CONNECTOR_eDP) return false;
+
+debugfs_fd = igt_debugfs_dir(display->drm_fd); if (debugfs_fd <
+0) return false;
+
+igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+str = strstr(buf, "bpp=");
+if (str && (strncmp(str, "bpp=18", 6) == 0)) ret = true; else
+ret = false;
+
+close(debugfs_fd);
+return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe

pipe, igt_plane_t *plane) { igt_display_t *display = &data->display; igt_crc_t ref_crc = {}, crc = {}; +bool is6bpc = false;

/* Set a background color on the primary fb for testing */ if
(plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t igt_plane_set_fb(plane, &data->argb_fb_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip
+crc

check */

tests/kms_plane_alpha_blend.c

Quoted 2 lines
tests/kms_plane_alpha_blend.c +2 -0
+is6bpc = is_6bpc(display, pipe); if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as

SKIP.

Quoted 36 lines
Quoted 5 lines

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 9 lines

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) ==
11) igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 2 lines

igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,

"None");

Quoted 21 lines
Quoted 21 lines

igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
igt_plane_set_fb(plane, &data->argb_fb_cov_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -1
-igt_assert_crc_equal(&ref_crc, &crc);
+
+/* 6bpc panels have dithering ON and CRC might fail, hence skip
+crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);
 
 igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#58 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Thank you so much.
I have changed the message as suggested and tested it. https://patchwork.freedesktop.org/patch/443390/?series=90828&rev=18
Kindly check Rev 18.

Now I get this:
Test skipped for 6bpc panels
Subtest pipe-A-coverage-vs-premult-vs-constant: SKIP (0.058s)

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Friday, July 9, 2021 12:17 PM
To: Srinivas, Vidya <[email protected]>; Shankar, Uma <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hi Vidya,

Overall it looks good, but I have one minor suggestion. Otherwise we are good to go.

+ /* 6bpc panels have dithering ON and CRC might fail, hence skip test */
+ igt_require(is_6bpc(display, pipe) == false);

It would be good if we print some useful message on skipping the test, so that user can aware of that skip.

Please try with below snippet:
igt_require_f(!is_6bpc(display, pipe), "Your message\n");

Thanks,
Bhanu

Quoted 40 lines

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Friday, July 9, 2021 11:52 AM
To: Modem, Bhanuprakash <[email protected]>; Shankar, Uma <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Could you kindly check if rev 16 is okay for merge? Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Thursday, July 8, 2021 7:56 PM
To: Modem, Bhanuprakash <[email protected]>; Shankar, Uma <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Very sorry Bhanu, I missed seeing your comments before submitting. Apologies. Please find them fixed here.

https://patchwork.freedesktop.org/patch/443213/?series=90828&rev=16

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 7:51 PM
To: Srinivas, Vidya <[email protected]>; Shankar, Uma <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 229 lines

Hi Vidya,

Can you please address the comments in rev 14:
https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14

Thanks,
Bhanu

Quoted 220 lines

-----Original Message-----
From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 7:49 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma/Bhanu,

https://patchwork.freedesktop.org/patch/443212/?series=90828&rev=15
I have submitted the patch with adding DSI and skipping the test. Kindly check and approve if okay.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya
Sent: Thursday, July 8, 2021 7:44 PM
To: Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Uma,

Sure, I have already submitted skipping test itself
https://patchwork.freedesktop.org/patch/443207/?series=90828&rev=14
I will add DSI also the same and re-submit. Thank you so much.

Regards
Vidya

-----Original Message-----
From: Shankar, Uma <[email protected]>
Sent: Thursday, July 8, 2021 7:05 PM
To: Modem, Bhanuprakash <[email protected]>; Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 19 lines

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 5:51 PM
To: Srinivas, Vidya <[email protected]>; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 10 lines

From: Srinivas, Vidya <[email protected]>
Sent: Thursday, July 8, 2021 5:03 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Quoted 8 lines
Quoted 3 lines

No we skip it for all 6bpc. We can skip the test, but as discussed with Uma, I just skip crc check, not the test. Kindly suggest further.

If we remove/skip the crc check, I think there is no point in doing further commits unless we have kernel checkers.

Uma?

I think it's a compromise here, skip on 6bpc would be ideal here or we need to have some passing criterion in order to declare this as pass.

We can do the bpc check after the first commit and skip there itself if we detect 6bpc.This should be better given the constraints. Also Vidya its good to add MIPI_DSI along with eDP as well since we have some 6bpc MIPI DSI panels as well.

Quoted 102 lines
Quoted 102 lines

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 4:15 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Quoted 83 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 3:01 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend:
Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the CRC assertion for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 43
+++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index
a37cb27c7d62..e450e64cb105
100644

tests/kms_plane_alpha_blend.c +26 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, 
 enum pipe pipe, igt_plane_t *plane) 
 igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) { 
+char buf[4096]; char *str; bool ret; int debugfs_fd; 
+drmModeConnector *c; igt_output_t *output = 
+igt_get_single_output_for_pipe(display,
+pipe);
+
+if (!is_i915_device(display->drm_fd))
+return false;
+
+c = output->config.connector; if (c->connector_type != 
+DRM_MODE_CONNECTOR_eDP) return false;
+
+debugfs_fd = igt_debugfs_dir(display->drm_fd); if (debugfs_fd 
+<
+0) return false;
+
+igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+str = strstr(buf, "bpp=");
+if (str && (strncmp(str, "bpp=18", 6) == 0)) ret = true; else 
+ret = false;
+
+close(debugfs_fd);
+return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe 

pipe, igt_plane_t *plane) { igt_display_t *display = &data->display; igt_crc_t ref_crc = {}, crc = {}; +bool is6bpc = false;

/* Set a background color on the primary fb for testing */
if (plane->type != DRM_PLANE_TYPE_PRIMARY) @@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t igt_plane_set_fb(plane, &data->argb_fb_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc); -igt_assert_crc_equal(&ref_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -0
+
+/* 6bpc panels have dithering ON and CRC might fail, hence 
+skip crc

check */

tests/kms_plane_alpha_blend.c

Quoted 2 lines
tests/kms_plane_alpha_blend.c +2 -0
+is6bpc = is_6bpc(display, pipe); if (is6bpc == false) 
+igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise IGT will report this test result as PASS instead of reporting as

SKIP.

Quoted 36 lines
Quoted 5 lines

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 9 lines

Also, are we going to skip this test on only gen 11? Then we need a check to perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) ==
11) igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

Quoted 2 lines

igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE,

"None");

Quoted 21 lines
Quoted 21 lines

igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
igt_plane_set_fb(plane, &data->argb_fb_cov_7e); igt_display_commit2(display, COMMIT_ATOMIC); igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc); -igt_assert_crc_equal(&ref_crc, &crc);

tests/kms_plane_alpha_blend.c +3 -0
+
+/* 6bpc panels have dithering ON and CRC might fail, hence 
+skip crc

check */

tests/kms_plane_alpha_blend.c +2 -1
+if (is6bpc == false)
+igt_assert_crc_equal(&ref_crc, &crc);
 
 igt_pipe_crc_stop(data->pipe_crc);
 }
--

2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#59 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

In reply to Vidya Srinivas

Intel platforms using 6bpc panels have dithering ON
and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the subtest for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 39 +++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +37 -2
index a37cb27c7d62..6560b37981b6 100644
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
@@ -454,6 +486,11 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip test */
+	is6bpc = is_6bpc(display, pipe);
+	igt_require(is6bpc == false);
+
 	igt_pipe_crc_start(data->pipe_crc);
 	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
@@ -461,14 +498,12 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
Signature · 6 lines
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#60 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Quoted 31 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Thursday, July 8, 2021 6:16 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage- vs-premult-vs-none for 6bpc panels

Intel platforms using 6bpc panels have dithering ON
and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the subtest for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 39 +++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +0 -0
index a37cb27c7d62..6560b37981b6 100644

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, · line 447

Quoted 6 lines
tests/kms_plane_alpha_blend.c +2 -0
@@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum pipe pipe,
 igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];

Is this size enough? There is a lot of data available in i915_display_info and consider the worst case pipe-D

Quoted 26 lines
tests/kms_plane_alpha_blend.c +25 -0
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 480

Quoted 10 lines
tests/kms_plane_alpha_blend.c +5 -0
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe,
 igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;

This local variable is not required

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 492

Quoted 12 lines
tests/kms_plane_alpha_blend.c +0 -0
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
@@ -454,6 +486,11 @@ static void coverage_premult_constant(data_t *data, enum

pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +4 -0
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip test */
+	is6bpc = is_6bpc(display, pipe);
+	igt_require(is6bpc == false);

Local variable is not required, you can directly use as below:

igt_require_f(!is_6bpc(display, pipe), "<Some useful message on skip>\n");

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 464

Quoted 10 lines
tests/kms_plane_alpha_blend.c +1 -0
+
 	igt_pipe_crc_start(data->pipe_crc);
 	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
@@ -461,14 +498,12 @@ static void coverage_premult_constant(data_t *data, enum

pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +0 -1
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);

Don't remove crc checks, these are needed for > 6-bpc panels. For panels with 6-bpc, control will ever reach here.

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 471

Quoted 7 lines
tests/kms_plane_alpha_blend.c +0 -1
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);

Same here

Quoted 10 lines

igt_pipe_crc_stop(data->pipe_crc);
}
--
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#61 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

In reply to Vidya Srinivas

Intel platforms using 6bpc panels have dithering ON
and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the subtest for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 40 +++++++++++++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +38 -2
index a37cb27c7d62..a2baaa2aacf0 100644
@@ -442,10 +442,43 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+		c->connector_type != DRM_MODE_CONNECTOR_DSI)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc = false;
 
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
@@ -454,6 +487,11 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip test */
+	is6bpc = is_6bpc(display, pipe);
+	igt_require(is6bpc == false);
+
 	igt_pipe_crc_start(data->pipe_crc);
 	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
@@ -461,14 +499,12 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_pipe_crc_stop(data->pipe_crc);
 }
Signature · 6 lines
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#62 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Intel platforms using 6bpc panels have dithering ON
and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the subtest for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 36 +++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
tests/kms_plane_alpha_blend.c +36 -0
index a37cb27c7d62..eb45dcc16a6d 100644
@@ -442,6 +442,38 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[8192];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+		c->connector_type != DRM_MODE_CONNECTOR_DSI)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
@@ -454,6 +486,10 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip test */
+	igt_require(is_6bpc(display, pipe) == false);
+
 	igt_pipe_crc_start(data->pipe_crc);
 	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
Signature · 6 lines
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#63 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Intel platforms using 6bpc panels have dithering ON
and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the subtest for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 37 +++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
tests/kms_plane_alpha_blend.c +37 -0
index a37cb27c7d62..6fccb50758dc 100644
@@ -442,6 +442,38 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[8192];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+		c->connector_type != DRM_MODE_CONNECTOR_DSI)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
@@ -454,6 +486,11 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip test */
+	igt_require(is_6bpc(display, pipe) == false);
+	igt_require_f(!is_6bpc(display, pipe), "Test skipped for 6bpc panels\n");
+
 	igt_pipe_crc_start(data->pipe_crc);
 	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
Signature · 6 lines
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#64 lore raw

PATCH 1/1 tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Intel platforms using 6bpc panels have dithering ON
and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the subtest for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 36 +++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
tests/kms_plane_alpha_blend.c +36 -0
index a37cb27c7d62..a3529dc2190f 100644
@@ -442,6 +442,38 @@ static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[8192];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+		c->connector_type != DRM_MODE_CONNECTOR_DSI)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf, sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
@@ -454,6 +486,10 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip test */
+	igt_require_f(!is_6bpc(display, pipe), "Test skipped for 6bpc panels\n");
+
 	igt_pipe_crc_start(data->pipe_crc);
 	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
Signature · 6 lines
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#65 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Quoted 80 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Friday, July 9, 2021 12:28 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage- vs-premult-vs-none for 6bpc panels

Intel platforms using 6bpc panels have dithering ON
and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the subtest for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 36 +++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
tests/kms_plane_alpha_blend.c +32 -0
index a37cb27c7d62..a3529dc2190f 100644
@@ -442,6 +442,38 @@ static void coverage_7efc(data_t *data, enum pipe pipe,
 igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[8192];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+		c->connector_type != DRM_MODE_CONNECTOR_DSI)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe,

igt_plane_t *plane)
{

tests/kms_plane_alpha_blend.c +0 -0
 	igt_display_t *display = &data->display;
@@ -454,6 +486,10 @@ static void coverage_premult_constant(data_t *data, enum

pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +3 -0
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip test */
+	igt_require_f(!is_6bpc(display, pipe), "Test skipped for 6bpc
Quoted 1 line

panels\n");

LGTM: Acked-by: Bhanuprakash Modem <[email protected]>

Quoted 11 lines
tests/kms_plane_alpha_blend.c +1 -1
+
 	igt_pipe_crc_start(data->pipe_crc);
 	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
--

2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#66 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu/Uma/Juha-Pekka,

Thank you so much.

Petri, could you kindly help merge this? Thank you so much.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Friday, July 9, 2021 4:18 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Quoted 82 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Friday, July 9, 2021 12:28 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage- vs-premult-vs-none for 6bpc panels

Intel platforms using 6bpc panels have dithering ON and show CRC mismatch in coverage-vs-premult-vs-none Doing a crc based test with dithering is not a great idea as pixels will change due to the 8bit to 6bits truncation with dithering.

This patch skips the subtest for 6bpc panels. Currently, there is no better way of fetching the bpc info other than EDID or display_info. Currently using i915_display_info for the same. Hence restricting the check to i915 devices only.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>
Credits-to: Modem Bhanuprakash <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 36 
+++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..a3529dc2190f 100644

tests/kms_plane_alpha_blend.c +33 -0
@@ -442,6 +442,38 @@ static void coverage_7efc(data_t *data, enum pipe 
 pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[8192];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, 
+pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+		c->connector_type != DRM_MODE_CONNECTOR_DSI)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, 

igt_plane_t *plane) {
igt_display_t *display = &data->display; @@ -454,6 +486,10 @@ static
void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +3 -0
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* 6bpc panels have dithering ON and CRC might fail, hence skip test */
+	igt_require_f(!is_6bpc(display, pipe), "Test skipped for 6bpc
Quoted 1 line

panels\n");

LGTM: Acked-by: Bhanuprakash Modem <[email protected]>

Quoted 11 lines
tests/kms_plane_alpha_blend.c +1 -1
+
 	igt_pipe_crc_start(data->pipe_crc);
 	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
 
--

2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#67 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

In reply to Vidya Srinivas
Quoted 6 lines · Vidya Srinivas
tests/kms_plane_alpha_blend.c +5 -0
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[8192];
+	char *str;
+	bool ret;
+	int debugfs_fd;

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 459

Quoted 10 lines
tests/kms_plane_alpha_blend.c +10 -0
+	drmModeConnector *c;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+		c->connector_type != DRM_MODE_CONNECTOR_DSI)
+		return false;

Isn't this an && rather than an || ?

[298/1063] Compiling C object 'tests/59830eb@@kms_plane_alpha_blend@exe/kms_plane_alpha_blend.c.o'. ../tests/kms_plane_alpha_blend.c: In function ‘is_6bpc’:
../tests/kms_plane_alpha_blend.c:457:50: warning: logical ‘or’ of collectively exhaustive tests is always true [-Wlogical-op]
if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||

                                                  ^~

You cannot merge code with compile warnings.
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#68 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Hi Ashutosh,

Apologies, yes it should be &&. You are right. How do I fix it, revert and resubmit? Patch is merged. Should I submit another patch saying fixes this? Immediately it might not be breaking anything huge but I need to fix it.

Regards
Vidya

-----Original Message-----
From: Dixit, Ashutosh <[email protected]>
Sent: Wednesday, July 14, 2021 7:36 AM
To: Srinivas, Vidya <[email protected]>
Cc: [email protected]
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Quoted 7 lines · Vidya Srinivas
tests/kms_plane_alpha_blend.c +6 -0
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[8192];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	drmModeConnector *c;

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 459

Quoted 10 lines
tests/kms_plane_alpha_blend.c +10 -0
+	igt_output_t *output = igt_get_single_output_for_pipe(display, 
+pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	c = output->config.connector;
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+		c->connector_type != DRM_MODE_CONNECTOR_DSI)
+		return false;

Isn't this an && rather than an || ?

[298/1063] Compiling C object 'tests/59830eb@@kms_plane_alpha_blend@exe/kms_plane_alpha_blend.c.o'. ../tests/kms_plane_alpha_blend.c: In function ‘is_6bpc’:
../tests/kms_plane_alpha_blend.c:457:50: warning: logical ‘or’ of collectively exhaustive tests is always true [-Wlogical-op]
if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
^~ You cannot merge code with compile warnings.
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#69 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Quoted 6 lines · Vidya

Hi Ashutosh,

Apologies, yes it should be &&. You are right. How do I fix it, revert and resubmit? Patch is merged. Should I submit another patch saying fixes this? Immediately it might not be breaking anything huge but I need to fix it.

No need to revert, just send another patch to fix it.

Quoted 32 lines

Regards
Vidya

-----Original Message-----
From: Dixit, Ashutosh <[email protected]>
Sent: Wednesday, July 14, 2021 7:36 AM
To: Srinivas, Vidya <[email protected]>
Cc: [email protected]
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Quoted 7 lines · Vidya Srinivas
tests/kms_plane_alpha_blend.c +6 -0
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+     char buf[8192];
+     char *str;
+     bool ret;
+     int debugfs_fd;
+     drmModeConnector *c;

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 459

Quoted 10 lines
tests/kms_plane_alpha_blend.c +10 -0
+     igt_output_t *output = igt_get_single_output_for_pipe(display,
+pipe);
+
+     if (!is_i915_device(display->drm_fd))
+             return false;
+
+     c = output->config.connector;
+     if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+             c->connector_type != DRM_MODE_CONNECTOR_DSI)
+             return false;

Isn't this an && rather than an || ?

Quoted 5 lines

[298/1063] Compiling C object 'tests/59830eb@@kms_plane_alpha_blend@exe/kms_plane_alpha_blend.c.o'. ../tests/kms_plane_alpha_blend.c: In function ‘is_6bpc’:
../tests/kms_plane_alpha_blend.c:457:50: warning: logical ‘or’ of collectively exhaustive tests is always true [-Wlogical-op]
if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
^~ You cannot merge code with compile warnings.

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#70 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Sure, thank you so much Ashutosh.

Regards
Vidya

-----Original Message-----
From: Dixit, Ashutosh <[email protected]>
Sent: Wednesday, July 14, 2021 8:49 AM
To: Srinivas, Vidya <[email protected]>
Cc: [email protected]; Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Quoted 6 lines · Vidya

Hi Ashutosh,

Apologies, yes it should be &&. You are right. How do I fix it, revert and resubmit? Patch is merged. Should I submit another patch saying fixes this? Immediately it might not be breaking anything huge but I need to fix it.

No need to revert, just send another patch to fix it.

Quoted 32 lines

Regards
Vidya

-----Original Message-----
From: Dixit, Ashutosh <[email protected]>
Sent: Wednesday, July 14, 2021 7:36 AM
To: Srinivas, Vidya <[email protected]>
Cc: [email protected]
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Quoted 7 lines · Vidya Srinivas
tests/kms_plane_alpha_blend.c +6 -0
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+     char buf[8192];
+     char *str;
+     bool ret;
+     int debugfs_fd;
+     drmModeConnector *c;

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 459

Quoted 10 lines
tests/kms_plane_alpha_blend.c +10 -0
+     igt_output_t *output = igt_get_single_output_for_pipe(display,
+pipe);
+
+     if (!is_i915_device(display->drm_fd))
+             return false;
+
+     c = output->config.connector;
+     if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+             c->connector_type != DRM_MODE_CONNECTOR_DSI)
+             return false;

Isn't this an && rather than an || ?

Quoted 5 lines

[298/1063] Compiling C object 'tests/59830eb@@kms_plane_alpha_blend@exe/kms_plane_alpha_blend.c.o'. ../tests/kms_plane_alpha_blend.c: In function ‘is_6bpc’:
../tests/kms_plane_alpha_blend.c:457:50: warning: logical ‘or’ of collectively exhaustive tests is always true [-Wlogical-op]
if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
^~ You cannot merge code with compile warnings.

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#71 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

In reply to Dixit, Ashutosh

Hello Ashutosh,

Thanks much for pointing the issue.
https://patchwork.freedesktop.org/patch/443926/ have submitted this.

Apologies Uma/Bhanu/Kunal, can we merge this patch as well ☹?

Regards
Vidya

-----Original Message-----
From: Dixit, Ashutosh <[email protected]>
Sent: Wednesday, July 14, 2021 8:49 AM
To: Srinivas, Vidya <[email protected]>
Cc: [email protected]; Shankar, Uma <[email protected]>; Modem, Bhanuprakash <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Quoted 6 lines · Vidya

Hi Ashutosh,

Apologies, yes it should be &&. You are right. How do I fix it, revert and resubmit? Patch is merged. Should I submit another patch saying fixes this? Immediately it might not be breaking anything huge but I need to fix it.

No need to revert, just send another patch to fix it.

Quoted 32 lines

Regards
Vidya

-----Original Message-----
From: Dixit, Ashutosh <[email protected]>
Sent: Wednesday, July 14, 2021 7:36 AM
To: Srinivas, Vidya <[email protected]>
Cc: [email protected]
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Quoted 7 lines · Vidya Srinivas
tests/kms_plane_alpha_blend.c +6 -0
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+     char buf[8192];
+     char *str;
+     bool ret;
+     int debugfs_fd;
+     drmModeConnector *c;

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 459

Quoted 10 lines
tests/kms_plane_alpha_blend.c +10 -0
+     igt_output_t *output = igt_get_single_output_for_pipe(display,
+pipe);
+
+     if (!is_i915_device(display->drm_fd))
+             return false;
+
+     c = output->config.connector;
+     if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+             c->connector_type != DRM_MODE_CONNECTOR_DSI)
+             return false;

Isn't this an && rather than an || ?

Quoted 5 lines

[298/1063] Compiling C object 'tests/59830eb@@kms_plane_alpha_blend@exe/kms_plane_alpha_blend.c.o'. ../tests/kms_plane_alpha_blend.c: In function ʽis_6bpcʼ:
../tests/kms_plane_alpha_blend.c:457:50: warning: logical ʽorʼ of collectively exhaustive tests is always true [-Wlogical-op]
if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
^~ You cannot merge code with compile warnings.

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#72 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc in coverage-vs-premult-vs-none for 6bpc panels

In reply to Vidya Srinivas
Quoted 23 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Wednesday, July 7, 2021 9:53 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 6bpc panels are giving CRC mismatch in coverage-vs-premult-vs-none 6bpc panel has dithering ON and CRC test with dithering ON might result in mismatch. Hence, skipping CRC assertion for 6bpc panels.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 39 +++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +0 -0
index a37cb27c7d62..536d96546608 100644

tests/kms_plane_alpha_blend.c line 28

Quoted 4 lines
tests/kms_plane_alpha_blend.c +1 -0
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include <string.h>

No need to include string.h

Quoted 9 lines
tests/kms_plane_alpha_blend.c +1 -0
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode properties");
 
@@ -442,10 +443,41 @@ static void coverage_7efc(data_t *data, enum pipe pipe,
 igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, · line 457

Quoted 10 lines
tests/kms_plane_alpha_blend.c +10 -0
+	char buf[4096];
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	drmModeConnector *c = output->config.connector;

This will throw the warning Mixed declarations

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 466

Quoted 11 lines
tests/kms_plane_alpha_blend.c +10 -0
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");

I think, this approach won't work for all pipes except pipe-A, i915_display_info looks like below:

[CRTC:80:pipe A]:

	pipe src size=1920x1080, dither=no, bpp=18
[CRTC:131:pipe B]:
	pipe src size=1920x1080, dither=no, bpp=24
[CRTC:182:pipe C]:
	pipe src size=1920x1080, dither=no, bpp=30

[CRTC:233:pipe D]:

We might end-up by reading the pipe-A bpp everytime, even though we are running test on pipe-B.

And yeah, bpp won't present if pipe is not enabled. I would suggest to run the test in interactive mode & check the i915_display_info to make sure at an instance only one pipe is enabled (means only one bpp available in entire debugfs), otherwise we need to modify the logic to read the bpp of particular pipe.

./kms_plane_alpha_blend --r coverage-vs-premult-vs-none --interactive

Quoted 5 lines
tests/kms_plane_alpha_blend.c +5 -0
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;
+

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 480

Quoted 10 lines
tests/kms_plane_alpha_blend.c +5 -0
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe,
 igt_plane_t *plane)
 {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc;

Unused variable,

Quoted 11 lines
tests/kms_plane_alpha_blend.c +0 -0
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
@@ -461,14 +493,17 @@ static void coverage_premult_constant(data_t *data, enum

pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +2 -1
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	if (is_6bpc(display, pipe) == false)

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 506

Quoted 10 lines
tests/kms_plane_alpha_blend.c +3 -1
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+	if (is_6bpc(display, pipe) == false)
+		igt_assert_crc_equal(&ref_crc, &crc);

Still, do we need to execute all above stuff? Instead, how about checking at the beginning of this function & skip?

Quoted 10 lines

igt_pipe_crc_stop(data->pipe_crc);
}
--
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#73 lore raw

Re: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc in coverage-vs-premult-vs-none for 6bpc panels

Hello Bhanu,

Thank you so much.
I have added a check for eDP only.

As you said, only one pipe at a time which belongs to eDP needs to be enabled. And that is happening. I have tested with only eDP connected and eDP + DP connected.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Thursday, July 8, 2021 2:45 PM
To: Srinivas, Vidya <[email protected]>; [email protected]
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc in coverage-vs-premult-vs-none for 6bpc panels

Quoted 25 lines

From: igt-dev <[email protected]> On Behalf Of Vidya Srinivas
Sent: Wednesday, July 7, 2021 9:53 PM
To: [email protected]
Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc in coverage-vs-premult-vs-none for 6bpc panels

Intel Gen11 6bpc panels are giving CRC mismatch in coverage-vs-premult-vs-none 6bpc panel has dithering ON and CRC test
with dithering ON might result in mismatch. Hence, skipping CRC assertion for 6bpc panels.

Credits-to: Uma Shankar <[email protected]>
Credits-to: Juha-pekka Heikkila <[email protected]>

---
 tests/kms_plane_alpha_blend.c | 39 
+++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..536d96546608 100644

tests/kms_plane_alpha_blend.c line 28

Quoted 4 lines
tests/kms_plane_alpha_blend.c +1 -0
@@ -25,6 +25,7 @@
  */
 
 #include "igt.h"
+#include <string.h>

No need to include string.h

Quoted 11 lines
tests/kms_plane_alpha_blend.c +2 -0
 IGT_TEST_DESCRIPTION("Test plane alpha and blending mode 
 properties");
 
@@ -442,10 +443,41 @@ static void coverage_7efc(data_t *data, enum 
 pipe pipe, igt_plane_t *plane)
 	igt_pipe_crc_stop(data->pipe_crc);
 }
 
+static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
+	char buf[4096];

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum · line 458

Quoted 10 lines
tests/kms_plane_alpha_blend.c +10 -0
+	char *str;
+	bool ret;
+	int debugfs_fd;
+	igt_output_t *output = igt_get_single_output_for_pipe(display, 
+pipe);
+
+	if (!is_i915_device(display->drm_fd))
+		return false;
+
+	drmModeConnector *c = output->config.connector;

This will throw the warning Mixed declarations

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 466

Quoted 11 lines
tests/kms_plane_alpha_blend.c +10 -0
+	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return false;
+
+	debugfs_fd = igt_debugfs_dir(display->drm_fd);
+	if (debugfs_fd < 0)
+		return false;
+
+	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
 sizeof(buf));
+
+	str = strstr(buf, "bpp=");

I think, this approach won't work for all pipes except pipe-A, i915_display_info looks like below:

[CRTC:80:pipe A]:

	pipe src size=1920x1080, dither=no, bpp=18 [CRTC:131:pipe B]:
	pipe src size=1920x1080, dither=no, bpp=24 [CRTC:182:pipe C]:
	pipe src size=1920x1080, dither=no, bpp=30 [CRTC:233:pipe D]:

We might end-up by reading the pipe-A bpp everytime, even though we are running test on pipe-B.

And yeah, bpp won't present if pipe is not enabled. I would suggest to run the test in interactive mode & check the i915_display_info to make sure at an instance only one pipe is enabled (means only one bpp available in entire debugfs), otherwise we need to modify the logic to read the bpp of particular pipe.

./kms_plane_alpha_blend --r coverage-vs-premult-vs-none --interactive

Quoted 4 lines
tests/kms_plane_alpha_blend.c +4 -0
+	if (str && (strncmp(str, "bpp=18", 6) == 0))
+		ret = true;
+	else
+		ret = false;

tests/kms_plane_alpha_blend.c static void coverage_7efc(data_t *data, enum pipe pipe, igt_plane_t *plane) · line 480

Quoted 10 lines
tests/kms_plane_alpha_blend.c +6 -0
+
+	close(debugfs_fd);
+	return ret;
+}
+
 static void coverage_premult_constant(data_t *data, enum pipe pipe, 
 igt_plane_t *plane)  {
 	igt_display_t *display = &data->display;
 	igt_crc_t ref_crc = {}, crc = {};
+	bool is6bpc;

Unused variable,

Quoted 11 lines
tests/kms_plane_alpha_blend.c +0 -0
 	/* Set a background color on the primary fb for testing */
 	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
@@ -461,14 +493,17 @@ static void coverage_premult_constant(data_t *data, enum

pipe pipe, igt_plane_t

tests/kms_plane_alpha_blend.c +2 -1
 	igt_plane_set_fb(plane, &data->argb_fb_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+
+	if (is_6bpc(display, pipe) == false)

tests/kms_plane_alpha_blend.c static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t · line 506

Quoted 10 lines
tests/kms_plane_alpha_blend.c +3 -1
+		igt_assert_crc_equal(&ref_crc, &crc);
 
 	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
 	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
 	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
 	igt_display_commit2(display, COMMIT_ATOMIC);
 	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
-	igt_assert_crc_equal(&ref_crc, &crc);
+	if (is_6bpc(display, pipe) == false)
+		igt_assert_crc_equal(&ref_crc, &crc);

Still, do we need to execute all above stuff? Instead, how about checking at the beginning of this function & skip?

Quoted 10 lines

igt_pipe_crc_stop(data->pipe_crc);
}
--
2.32.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#74 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev3)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev3)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10212 -> IGTPW_5913
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_5913:

### IGT changes ###

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@runner@aborted:
- {fi-jsl-1}: NOTRUN -> [FAIL][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-jsl-1/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_5913 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@core_hotunplug@unbind-rebind:
- fi-bdw-5557u: NOTRUN -> [WARN][2] ([i915#2283])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-bdw-5557u/igt@[email protected]

* igt@i915_selftest@live@execlists:
- fi-bdw-5557u: NOTRUN -> [DMESG-FAIL][3] ([i915#3462])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-bdw-5557u/igt@i915_selftest@[email protected]

* igt@kms_psr@cursor_plane_move:
- fi-bdw-5557u: NOTRUN -> [SKIP][4] ([fdo#109271]) +5 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-bdw-5557u/igt@kms_psr@cursor_plane_move.html

#### Warnings ####

* igt@i915_selftest@live@execlists:
- fi-bsw-nick: [DMESG-FAIL][5] ([i915#3462]) -> [INCOMPLETE][6] ([i915#2782] / [i915#2940] / [i915#3462])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/fi-bsw-nick/igt@i915_selftest@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-bsw-nick/igt@i915_selftest@[email protected]
- fi-cml-s: [DMESG-FAIL][7] ([i915#3462]) -> [INCOMPLETE][8] ([i915#3462])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/fi-cml-s/igt@i915_selftest@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-cml-s/igt@i915_selftest@[email protected]

* igt@runner@aborted:
- fi-skl-6600u: [FAIL][9] ([i915#1436] / [i915#2426] / [i915#3363]) -> [FAIL][10] ([i915#1436] / [i915#3363])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/fi-skl-6600u/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-skl-6600u/igt@[email protected]
- fi-glk-dsi: [FAIL][11] ([i915#2426] / [i915#3363] / [k.org#202321]) -> [FAIL][12] ([i915#3363] / [k.org#202321])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/fi-glk-dsi/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-glk-dsi/igt@[email protected]
- fi-bdw-5557u: [FAIL][13] ([i915#1602] / [i915#2029]) -> [FAIL][14] ([i915#3462])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/fi-bdw-5557u/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-bdw-5557u/igt@[email protected]
- fi-kbl-soraka: [FAIL][15] ([i915#1436] / [i915#3363]) -> [FAIL][16] ([i915#1436] / [i915#2426] / [i915#3363])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/fi-kbl-soraka/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-kbl-soraka/igt@[email protected]
- fi-kbl-guc: [FAIL][17] ([i915#1436] / [i915#2426] / [i915#3363]) -> [FAIL][18] ([i915#1436] / [i915#3363])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/fi-kbl-guc/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-kbl-guc/igt@[email protected]
- fi-cml-u2: [FAIL][19] ([i915#3363] / [i915#3462]) -> [FAIL][20] ([i915#2082] / [i915#2426] / [i915#3363] / [i915#3462])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/fi-cml-u2/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-cml-u2/igt@[email protected]
- fi-cfl-guc: [FAIL][21] ([i915#2426] / [i915#3363]) -> [FAIL][22] ([i915#3363])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/fi-cfl-guc/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-cfl-guc/igt@[email protected]
- fi-skl-guc: [FAIL][23] ([i915#1436] / [i915#3363]) -> [FAIL][24] ([i915#1436] / [i915#2426] / [i915#3363])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/fi-skl-guc/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/fi-skl-guc/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1222]: https://gitlab.freedesktop.org/drm/intel/issues/1222
[i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
[i915#1602]: https://gitlab.freedesktop.org/drm/intel/issues/1602
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#2029]: https://gitlab.freedesktop.org/drm/intel/issues/2029
[i915#2082]: https://gitlab.freedesktop.org/drm/intel/issues/2082
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2283]: https://gitlab.freedesktop.org/drm/intel/issues/2283
[i915#2426]: https://gitlab.freedesktop.org/drm/intel/issues/2426
[i915#2782]: https://gitlab.freedesktop.org/drm/intel/issues/2782
[i915#2940]: https://gitlab.freedesktop.org/drm/intel/issues/2940
[i915#3301]: https://gitlab.freedesktop.org/drm/intel/issues/3301
[i915#3303]: https://gitlab.freedesktop.org/drm/intel/issues/3303
[i915#3363]: https://gitlab.freedesktop.org/drm/intel/issues/3363
[i915#3462]: https://gitlab.freedesktop.org/drm/intel/issues/3462
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533
[k.org#202321]: https://bugzilla.kernel.org/show_bug.cgi?id=202321

Participating hosts (46 -> 39)
------------------------------

Additional (1): fi-jsl-1
Missing (8): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan bat-adlp-4 bat-adls-4 fi-dg1-1 fi-bdw-samus bat-jsl-1

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6104 -> IGTPW_5913

CI-20190529: 20190529
CI_DRM_10212: d6a4e59ffc78a058586d57930708ba706d765be4 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5913: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/index.html
IGT_6104: f8f81bd3752f3126a47d9dbba2d0ab29f7c17a19 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#75 lore raw

[igt-dev] ✗ Fi.CI.IGT: failure for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev3)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev3)
URL : https://patchwork.freedesktop.org/series/90828/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_10212_full -> IGTPW_5913_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_5913_full absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_5913_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_5913_full:

### IGT changes ###

#### Possible regressions ####

* igt@kms_ccs@pipe-b-crc-primary-rotation-180:
- shard-glk: [PASS][1] -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-glk8/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-glk4/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_5913_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@feature_discovery@chamelium:
- shard-iclb: NOTRUN -> [SKIP][3] ([fdo#111827])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb8/igt@[email protected]

* igt@gem_ctx_persistence@legacy-engines-mixed-process:
- shard-snb: NOTRUN -> [SKIP][4] ([fdo#109271] / [i915#1099]) +5 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-snb5/igt@[email protected]

* igt@gem_ctx_persistence@many-contexts:
- shard-tglb: [PASS][5] -> [FAIL][6] ([i915#2410])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-tglb7/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb5/igt@[email protected]

* igt@gem_eio@in-flight-contexts-10ms:
- shard-tglb: [PASS][7] -> [TIMEOUT][8] ([i915#3063])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-tglb5/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb5/igt@[email protected]

* igt@gem_eio@in-flight-external:
- shard-glk: [PASS][9] -> [DMESG-WARN][10] ([i915#118] / [i915#95]) +2 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-glk5/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-glk4/igt@[email protected]

* igt@gem_exec_fair@basic-deadline:
- shard-apl: NOTRUN -> [FAIL][11] ([i915#2846])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl3/igt@[email protected]

* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-iclb: [PASS][12] -> [FAIL][13] ([i915#2842])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb2/igt@gem_exec_fair@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb4/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none@vcs1:
- shard-iclb: NOTRUN -> [FAIL][14] ([i915#2842]) +4 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@bcs0:
- shard-tglb: NOTRUN -> [FAIL][15] ([i915#2842]) +3 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb5/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@rcs0:
- shard-kbl: NOTRUN -> [FAIL][16] ([i915#2842]) +1 similar issue
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-kbl3/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-iclb: [PASS][17] -> [FAIL][18] ([i915#2849])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb6/igt@gem_exec_fair@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb8/igt@gem_exec_fair@[email protected]

* igt@gem_exec_reloc@basic-wide-active@rcs0:
- shard-snb: NOTRUN -> [FAIL][19] ([i915#2389]) +2 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-snb2/igt@gem_exec_reloc@[email protected]

* igt@gem_exec_reloc@basic-wide-active@vcs1:
- shard-iclb: NOTRUN -> [FAIL][20] ([i915#2389])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb4/igt@gem_exec_reloc@[email protected]

* igt@gem_huc_copy@huc-copy:
- shard-tglb: [PASS][21] -> [SKIP][22] ([i915#2190])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-tglb2/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][23] ([i915#2190])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb1/igt@[email protected]

* igt@gem_render_copy@yf-tiled-mc-ccs-to-vebox-y-tiled:
- shard-iclb: NOTRUN -> [SKIP][24] ([i915#768])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb2/igt@[email protected]

* igt@gem_userptr_blits@coherency-sync:
- shard-iclb: NOTRUN -> [SKIP][25] ([fdo#109290])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb5/igt@[email protected]

* igt@gen7_exec_parse@chained-batch:
- shard-iclb: NOTRUN -> [SKIP][26] ([fdo#109289])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb4/igt@[email protected]

* igt@gen9_exec_parse@batch-invalid-length:
- shard-snb: NOTRUN -> [SKIP][27] ([fdo#109271]) +443 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-snb6/igt@[email protected]

* igt@gen9_exec_parse@cmd-crossing-page:
- shard-tglb: NOTRUN -> [SKIP][28] ([fdo#112306])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][29] ([fdo#112306])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb4/igt@[email protected]

* igt@i915_pm_dc@dc6-psr:
- shard-iclb: [PASS][30] -> [FAIL][31] ([i915#454])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb5/igt@[email protected]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb6/igt@[email protected]

* igt@i915_selftest@live@execlists:
- shard-apl: NOTRUN -> [DMESG-FAIL][32] ([i915#3462])
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl8/igt@i915_selftest@[email protected]

* igt@kms_big_fb@linear-32bpp-rotate-270:
- shard-iclb: NOTRUN -> [SKIP][33] ([fdo#110725] / [fdo#111614])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb2/igt@[email protected]

* igt@kms_big_joiner@basic:
- shard-tglb: NOTRUN -> [SKIP][34] ([i915#2705])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][35] ([i915#2705])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb4/igt@[email protected]

* igt@kms_chamelium@common-hpd-after-suspend:
- shard-glk: NOTRUN -> [SKIP][36] ([fdo#109271] / [fdo#111827]) +3 similar issues
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-glk6/igt@[email protected]

* igt@kms_chamelium@dp-mode-timings:
- shard-apl: NOTRUN -> [SKIP][37] ([fdo#109271] / [fdo#111827]) +19 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl6/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-blue-to-red:
- shard-snb: NOTRUN -> [SKIP][38] ([fdo#109271] / [fdo#111827]) +24 similar issues
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-snb6/igt@[email protected]
- shard-kbl: NOTRUN -> [SKIP][39] ([fdo#109271] / [fdo#111827]) +7 similar issues
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-kbl7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][40] ([fdo#109284] / [fdo#111827]) +5 similar issues
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb5/igt@[email protected]

* igt@kms_color_chamelium@pipe-d-ctm-max:
- shard-tglb: NOTRUN -> [SKIP][41] ([fdo#109284] / [fdo#111827]) +3 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][42] ([fdo#109278] / [fdo#109284] / [fdo#111827])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb6/igt@[email protected]

* igt@kms_content_protection@dp-mst-lic-type-0:
- shard-iclb: NOTRUN -> [SKIP][43] ([i915#3116])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb8/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][44] ([i915#3116])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb1/igt@[email protected]

* igt@kms_content_protection@legacy:
- shard-iclb: NOTRUN -> [SKIP][45] ([fdo#109300] / [fdo#111066]) +1 similar issue
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb3/igt@[email protected]
- shard-kbl: NOTRUN -> [TIMEOUT][46] ([i915#1319]) +1 similar issue
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-kbl2/igt@[email protected]
- shard-apl: NOTRUN -> [TIMEOUT][47] ([i915#1319])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl6/igt@[email protected]

* igt@kms_content_protection@srm:
- shard-tglb: NOTRUN -> [SKIP][48] ([fdo#111828]) +1 similar issue
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb1/igt@[email protected]

* igt@kms_content_protection@uevent:
- shard-apl: NOTRUN -> [FAIL][49] ([i915#2105])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl1/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-suspend:
- shard-kbl: [PASS][50] -> [DMESG-WARN][51] ([i915#180]) +1 similar issue
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-kbl6/igt@[email protected]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-kbl1/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-32x10-random:
- shard-kbl: NOTRUN -> [SKIP][52] ([fdo#109271]) +38 similar issues
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-kbl7/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][53] ([i915#3359]) +2 similar issues
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb1/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-512x512-rapid-movement:
- shard-iclb: NOTRUN -> [SKIP][54] ([fdo#109278] / [fdo#109279])
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb4/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-32x32-rapid-movement:
- shard-tglb: NOTRUN -> [SKIP][55] ([i915#3319])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb8/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-32x10-offscreen:
- shard-iclb: NOTRUN -> [SKIP][56] ([fdo#109278]) +12 similar issues
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb7/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-512x512-onscreen:
- shard-tglb: NOTRUN -> [SKIP][57] ([fdo#109279] / [i915#3359])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb8/igt@[email protected]

* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-atomic:
- shard-glk: NOTRUN -> [FAIL][58] ([i915#72])
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-glk1/igt@[email protected]

* igt@kms_cursor_legacy@cursora-vs-flipb-atomic-transitions-varying-size:
- shard-iclb: NOTRUN -> [SKIP][59] ([fdo#109274] / [fdo#109278]) +1 similar issue
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb1/igt@kms_cursor_legacy@cursora-vs-flipb-atomic-transitions-varying-size.html

* igt@kms_fbcon_fbt@fbc-suspend:
- shard-kbl: [PASS][60] -> [INCOMPLETE][61] ([i915#155] / [i915#180] / [i915#636])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-kbl7/igt@[email protected]
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-kbl6/igt@[email protected]

* igt@kms_flip@2x-modeset-vs-vblank-race-interruptible:
- shard-iclb: NOTRUN -> [SKIP][62] ([fdo#109274]) +2 similar issues
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb3/igt@[email protected]

* igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
- shard-kbl: NOTRUN -> [DMESG-WARN][63] ([i915#180]) +2 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-kbl1/igt@kms_flip@[email protected]

* igt@kms_frontbuffer_tracking@psr-2p-primscrn-shrfb-plflip-blt:
- shard-iclb: NOTRUN -> [SKIP][64] ([fdo#109280]) +9 similar issues
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb6/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-cur-indfb-draw-mmap-gtt:
- shard-tglb: NOTRUN -> [SKIP][65] ([fdo#111825]) +8 similar issues
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb5/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-cur-indfb-draw-mmap-gtt.html

* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-render:
- shard-glk: NOTRUN -> [SKIP][66] ([fdo#109271]) +21 similar issues
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-glk3/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-render.html

* igt@kms_hdr@static-toggle-suspend:
- shard-tglb: NOTRUN -> [SKIP][67] ([i915#1187])
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][68] ([i915#1187]) +1 similar issue
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb2/igt@[email protected]

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- shard-apl: NOTRUN -> [DMESG-WARN][69] ([i915#180])
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl7/igt@[email protected]

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-d:
- shard-apl: NOTRUN -> [SKIP][70] ([fdo#109271] / [i915#533]) +1 similar issue
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl8/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-alpha-opaque-fb:
- shard-apl: NOTRUN -> [FAIL][71] ([fdo#108145] / [i915#265]) +4 similar issues
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl2/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-alpha-transparent-fb:
- shard-glk: NOTRUN -> [FAIL][72] ([i915#265])
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-glk1/igt@[email protected]
- shard-kbl: NOTRUN -> [FAIL][73] ([i915#265])
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-kbl7/igt@[email protected]

* igt@kms_plane_multiple@atomic-pipe-b-tiling-yf:
- shard-tglb: NOTRUN -> [SKIP][74] ([fdo#111615]) +1 similar issue
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb6/igt@[email protected]

* igt@kms_psr2_sf@plane-move-sf-dmg-area-2:
- shard-apl: NOTRUN -> [SKIP][75] ([fdo#109271] / [i915#658]) +5 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl1/igt@[email protected]

* igt@kms_psr@psr2_dpms:
- shard-iclb: [PASS][76] -> [SKIP][77] ([fdo#109441]) +1 similar issue
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb2/igt@kms_psr@psr2_dpms.html
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb5/igt@kms_psr@psr2_dpms.html

* igt@kms_psr@psr2_primary_render:
- shard-iclb: NOTRUN -> [SKIP][78] ([fdo#109441])
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb7/igt@kms_psr@psr2_primary_render.html

* igt@kms_vblank@pipe-d-ts-continuation-idle:
- shard-apl: NOTRUN -> [SKIP][79] ([fdo#109271]) +262 similar issues
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl6/igt@[email protected]

* igt@kms_writeback@writeback-invalid-parameters:
- shard-iclb: NOTRUN -> [SKIP][80] ([i915#2437])
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb1/igt@[email protected]

* igt@nouveau_crc@pipe-a-source-rg:
- shard-iclb: NOTRUN -> [SKIP][81] ([i915#2530]) +1 similar issue
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb3/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][82] ([i915#2530]) +1 similar issue
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb8/igt@[email protected]

* igt@perf@polling-parameterized:
- shard-apl: NOTRUN -> [FAIL][83] ([i915#1542])
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl6/igt@[email protected]

* igt@prime_nv_api@i915_nv_import_twice:
- shard-iclb: NOTRUN -> [SKIP][84] ([fdo#109291])
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb2/igt@prime_nv_api@i915_nv_import_twice.html

* igt@prime_vgem@fence-flip-hang:
- shard-iclb: NOTRUN -> [SKIP][85] ([fdo#109295])
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb8/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][86] ([fdo#109295])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb1/igt@[email protected]

* igt@sysfs_clients@create:
- shard-apl: NOTRUN -> [SKIP][87] ([fdo#109271] / [i915#2994]) +2 similar issues
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl2/igt@[email protected]

* igt@sysfs_clients@pidname:
- shard-iclb: NOTRUN -> [SKIP][88] ([i915#2994])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb6/igt@[email protected]

#### Possible fixes ####

* igt@gem_ctx_isolation@preservation-s3@rcs0:
- shard-kbl: [DMESG-WARN][89] ([i915#180]) -> [PASS][90]
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-kbl1/igt@gem_ctx_isolation@[email protected]
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-kbl2/igt@gem_ctx_isolation@[email protected]

* igt@gem_eio@suspend:
- shard-iclb: [INCOMPLETE][91] ([i915#1185]) -> [PASS][92]
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb3/igt@[email protected]
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb1/igt@[email protected]

* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-apl: [SKIP][93] ([fdo#109271]) -> [PASS][94]
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-apl1/igt@gem_exec_fair@[email protected]
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none-vip@rcs0:
- shard-glk: [FAIL][95] ([i915#2842]) -> [PASS][96]
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-glk3/igt@gem_exec_fair@[email protected]
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-glk7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-tglb: [FAIL][97] ([i915#2842]) -> [PASS][98]
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-tglb3/igt@gem_exec_fair@[email protected]
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb7/igt@gem_exec_fair@[email protected]

* igt@gem_mmap_gtt@cpuset-big-copy-xy:
- shard-iclb: [FAIL][99] ([i915#2428]) -> [PASS][100]
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb1/igt@[email protected]
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb7/igt@[email protected]

* igt@i915_selftest@live@hangcheck:
- shard-snb: [INCOMPLETE][101] ([i915#2782]) -> [PASS][102]
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-snb5/igt@i915_selftest@[email protected]
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-snb7/igt@i915_selftest@[email protected]

* igt@kms_draw_crc@draw-method-rgb565-mmap-wc-untiled:
- shard-glk: [FAIL][103] -> [PASS][104] +1 similar issue
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-glk8/igt@[email protected]
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-glk7/igt@[email protected]

* igt@kms_fbcon_fbt@fbc-suspend:
- shard-apl: [INCOMPLETE][105] ([i915#180]) -> [PASS][106]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-apl6/igt@[email protected]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl6/igt@[email protected]

* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible@bc-hdmi-a1-hdmi-a2:
- shard-glk: [FAIL][107] ([i915#79]) -> [PASS][108]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-glk8/igt@kms_flip@[email protected]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-glk1/igt@kms_flip@[email protected]

* igt@kms_flip@plain-flip-ts-check@a-hdmi-a2:
- shard-glk: [FAIL][109] ([i915#2122]) -> [PASS][110]
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-glk6/igt@kms_flip@[email protected]
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-glk6/igt@kms_flip@[email protected]

* igt@kms_psr@psr2_cursor_render:
- shard-iclb: [SKIP][111] ([fdo#109441]) -> [PASS][112] +3 similar issues
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb3/igt@kms_psr@psr2_cursor_render.html
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb2/igt@kms_psr@psr2_cursor_render.html

* igt@perf@polling-parameterized:
- shard-iclb: [FAIL][113] ([i915#1542]) -> [PASS][114]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb7/igt@[email protected]
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb3/igt@[email protected]

* igt@perf_pmu@rc6-suspend:
- shard-apl: [DMESG-WARN][115] ([i915#180]) -> [PASS][116]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-apl7/igt@[email protected]
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-apl3/igt@[email protected]

#### Warnings ####

* igt@i915_pm_dc@dc3co-vpb-simulation:
- shard-iclb: [SKIP][117] ([i915#588]) -> [SKIP][118] ([i915#658])
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb2/igt@[email protected]
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb8/igt@[email protected]

* igt@i915_pm_rc6_residency@rc6-fence:
- shard-iclb: [WARN][119] ([i915#1804] / [i915#2684]) -> [WARN][120] ([i915#2684])
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb6/igt@[email protected]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb2/igt@[email protected]

* igt@i915_selftest@live@execlists:
- shard-tglb: [DMESG-FAIL][121] ([i915#3462]) -> [INCOMPLETE][122] ([i915#3462])
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-tglb1/igt@i915_selftest@[email protected]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-tglb3/igt@i915_selftest@[email protected]

* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-1:
- shard-iclb: [SKIP][123] ([i915#2920]) -> [SKIP][124] ([i915#658]) +2 similar issues
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb2/igt@[email protected]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb7/igt@[email protected]

* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-3:
- shard-iclb: [SKIP][125] ([i915#658]) -> [SKIP][126] ([i915#2920])
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10212/shard-iclb5/igt@[email protected]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5913/shard-iclb2/igt@[email protected]

36 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#76 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev4)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev4)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10246 -> IGTPW_5943
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/index.html

Known issues
------------

Here are the changes found in IGTPW_5943 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@amdgpu/amd_basic@semaphore:
- fi-bdw-5557u: NOTRUN -> [SKIP][1] ([fdo#109271]) +27 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/fi-bdw-5557u/igt@amdgpu/[email protected]
- fi-kbl-soraka: NOTRUN -> [SKIP][2] ([fdo#109271]) +1 similar issue
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/fi-kbl-soraka/igt@amdgpu/[email protected]

* igt@core_hotunplug@unbind-rebind:
- fi-bdw-5557u: NOTRUN -> [WARN][3] ([i915#2283])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/fi-bdw-5557u/igt@[email protected]

* igt@gem_exec_parallel@engines@userptr:
- fi-pnv-d510: [PASS][4] -> [INCOMPLETE][5] ([i915#299])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/fi-pnv-d510/igt@gem_exec_parallel@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/fi-pnv-d510/igt@gem_exec_parallel@[email protected]

* igt@kms_chamelium@dp-crc-fast:
- fi-bdw-5557u: NOTRUN -> [SKIP][6] ([fdo#109271] / [fdo#111827]) +8 similar issues
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/fi-bdw-5557u/igt@[email protected]

* igt@runner@aborted:
- fi-pnv-d510: NOTRUN -> [FAIL][7] ([i915#2403] / [i915#2505] / [i915#2722])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/fi-pnv-d510/igt@[email protected]

#### Possible fixes ####

* igt@i915_selftest@live@gt_heartbeat:
- fi-cml-s: [DMESG-FAIL][8] ([i915#2291] / [i915#541]) -> [PASS][9]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/fi-cml-s/igt@i915_selftest@live@gt_heartbeat.html
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/fi-cml-s/igt@i915_selftest@live@gt_heartbeat.html

* igt@kms_chamelium@dp-crc-fast:
- fi-kbl-7500u: [FAIL][10] ([i915#1372]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/fi-kbl-7500u/igt@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/fi-kbl-7500u/igt@[email protected]

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1372]: https://gitlab.freedesktop.org/drm/intel/issues/1372
[i915#2283]: https://gitlab.freedesktop.org/drm/intel/issues/2283
[i915#2291]: https://gitlab.freedesktop.org/drm/intel/issues/2291
[i915#2403]: https://gitlab.freedesktop.org/drm/intel/issues/2403
[i915#2505]: https://gitlab.freedesktop.org/drm/intel/issues/2505
[i915#2722]: https://gitlab.freedesktop.org/drm/intel/issues/2722
[i915#299]: https://gitlab.freedesktop.org/drm/intel/issues/299
[i915#541]: https://gitlab.freedesktop.org/drm/intel/issues/541

Participating hosts (42 -> 36)
------------------------------

Missing (6): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-dg1-1 fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6113 -> IGTPW_5943

CI-20190529: 20190529
CI_DRM_10246: 3c00434f0d7ff138a7b56d5a901586d4473e10a7 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5943: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/index.html
IGT_6113: 138a29e30277b1039e9934fca5c782dc1e7a9f99 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#77 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev4)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev4)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10246_full -> IGTPW_5943_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/index.html

Known issues
------------

Here are the changes found in IGTPW_5943_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_create@create-clear:
- shard-glk: [PASS][1] -> [FAIL][2] ([i915#3160])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk1/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk5/igt@[email protected]

* igt@gem_ctx_persistence@smoketest:
- shard-snb: NOTRUN -> [SKIP][3] ([fdo#109271] / [i915#1099]) +3 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-snb5/igt@[email protected]

* igt@gem_eio@in-flight-contexts-1us:
- shard-tglb: [PASS][4] -> [TIMEOUT][5] ([i915#3063])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-tglb6/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb8/igt@[email protected]

* igt@gem_exec_fair@basic-none@vecs0:
- shard-iclb: NOTRUN -> [FAIL][6] ([i915#2842]) +3 similar issues
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@rcs0:
- shard-tglb: [PASS][7] -> [FAIL][8] ([i915#2842]) +1 similar issue
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-tglb7/igt@gem_exec_fair@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-glk: [PASS][9] -> [FAIL][10] ([i915#2842]) +5 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk7/igt@gem_exec_fair@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk5/igt@gem_exec_fair@[email protected]

* igt@gem_exec_params@secure-non-root:
- shard-iclb: NOTRUN -> [SKIP][11] ([fdo#112283])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb1/igt@[email protected]

* igt@gem_exec_reloc@basic-wide-active@bcs0:
- shard-glk: NOTRUN -> [FAIL][12] ([i915#3633]) +3 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk6/igt@gem_exec_reloc@[email protected]

* igt@gem_exec_reloc@basic-wide-active@vcs1:
- shard-iclb: NOTRUN -> [FAIL][13] ([i915#3633])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb4/igt@gem_exec_reloc@[email protected]

* igt@gem_huc_copy@huc-copy:
- shard-tglb: [PASS][14] -> [SKIP][15] ([i915#2190])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-tglb7/igt@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb6/igt@[email protected]

* igt@gem_userptr_blits@dmabuf-sync:
- shard-kbl: NOTRUN -> [SKIP][16] ([fdo#109271] / [i915#3323])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-kbl2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][17] ([i915#3323])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb7/igt@[email protected]
- shard-apl: NOTRUN -> [SKIP][18] ([fdo#109271] / [i915#3323])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl3/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][19] ([fdo#109271] / [i915#3323])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk8/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][20] ([i915#3323])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb7/igt@[email protected]

* igt@gen9_exec_parse@basic-rejected-ctx-param:
- shard-iclb: NOTRUN -> [SKIP][21] ([fdo#112306])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb5/igt@[email protected]

* igt@i915_pm_backlight@bad-brightness:
- shard-glk: NOTRUN -> [SKIP][22] ([fdo#109271]) +61 similar issues
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk7/igt@[email protected]

* igt@kms_big_fb@linear-16bpp-rotate-270:
- shard-tglb: NOTRUN -> [SKIP][23] ([fdo#111614])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb5/igt@[email protected]

* igt@kms_big_fb@linear-32bpp-rotate-0:
- shard-glk: [PASS][24] -> [DMESG-WARN][25] ([i915#118] / [i915#95]) +1 similar issue
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk7/igt@[email protected]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk9/igt@[email protected]

* igt@kms_big_fb@linear-32bpp-rotate-180:
- shard-glk: NOTRUN -> [DMESG-WARN][26] ([i915#118] / [i915#95])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk7/igt@[email protected]

* igt@kms_big_fb@y-tiled-64bpp-rotate-90:
- shard-iclb: NOTRUN -> [SKIP][27] ([fdo#110725] / [fdo#111614]) +1 similar issue
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb7/igt@[email protected]

* igt@kms_big_joiner@2x-modeset:
- shard-iclb: NOTRUN -> [SKIP][28] ([i915#2705])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb1/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][29] ([i915#2705])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb5/igt@[email protected]

* igt@kms_chamelium@hdmi-audio:
- shard-iclb: NOTRUN -> [SKIP][30] ([fdo#109284] / [fdo#111827]) +4 similar issues
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb1/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][31] ([fdo#109284] / [fdo#111827]) +1 similar issue
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb5/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-fast:
- shard-snb: NOTRUN -> [SKIP][32] ([fdo#109271] / [fdo#111827]) +22 similar issues
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-snb5/igt@[email protected]

* igt@kms_color@pipe-d-ctm-0-25:
- shard-iclb: NOTRUN -> [SKIP][33] ([fdo#109278] / [i915#1149])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb3/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-blue-to-red:
- shard-glk: NOTRUN -> [SKIP][34] ([fdo#109271] / [fdo#111827]) +4 similar issues
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk3/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-negative:
- shard-kbl: NOTRUN -> [SKIP][35] ([fdo#109271] / [fdo#111827]) +2 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-kbl4/igt@[email protected]

* igt@kms_color_chamelium@pipe-c-ctm-0-25:
- shard-apl: NOTRUN -> [SKIP][36] ([fdo#109271] / [fdo#111827]) +27 similar issues
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl3/igt@[email protected]

* igt@kms_content_protection@atomic-dpms:
- shard-apl: NOTRUN -> [TIMEOUT][37] ([i915#1319])
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl7/igt@[email protected]

* igt@kms_content_protection@lic:
- shard-iclb: NOTRUN -> [SKIP][38] ([fdo#109300] / [fdo#111066])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb3/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-512x512-rapid-movement:
- shard-iclb: NOTRUN -> [SKIP][39] ([fdo#109278] / [fdo#109279]) +1 similar issue
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb5/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-32x10-onscreen:
- shard-tglb: NOTRUN -> [SKIP][40] ([i915#3359]) +1 similar issue
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb6/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-512x512-random:
- shard-tglb: NOTRUN -> [SKIP][41] ([fdo#109279] / [i915#3359]) +1 similar issue
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb2/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-32x32-offscreen:
- shard-tglb: NOTRUN -> [SKIP][42] ([i915#3319])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb2/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-32x32-rapid-movement:
- shard-iclb: NOTRUN -> [SKIP][43] ([fdo#109278]) +14 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb1/igt@[email protected]

* igt@kms_cursor_legacy@cursorb-vs-flipa-atomic-transitions-varying-size:
- shard-iclb: NOTRUN -> [SKIP][44] ([fdo#109274] / [fdo#109278])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb2/igt@kms_cursor_legacy@cursorb-vs-flipa-atomic-transitions-varying-size.html

* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible@ab-hdmi-a1-hdmi-a2:
- shard-glk: [PASS][45] -> [FAIL][46] ([i915#79])
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk4/igt@kms_flip@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk3/igt@kms_flip@[email protected]

* igt@kms_flip@2x-flip-vs-rmfb:
- shard-tglb: NOTRUN -> [SKIP][47] ([fdo#111825]) +10 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][48] ([fdo#109274]) +2 similar issues
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb5/igt@[email protected]

* igt@kms_flip@2x-plain-flip-ts-check-interruptible@ab-hdmi-a1-hdmi-a2:
- shard-glk: [PASS][49] -> [FAIL][50] ([i915#2122])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk2/igt@kms_flip@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk7/igt@kms_flip@[email protected]

* igt@kms_flip@flip-vs-suspend-interruptible@c-dp1:
- shard-apl: [PASS][51] -> [DMESG-WARN][52] ([i915#180])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl3/igt@kms_flip@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl3/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs:
- shard-apl: NOTRUN -> [SKIP][53] ([fdo#109271] / [i915#2672]) +1 similar issue
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl1/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs.html

* igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile:
- shard-snb: NOTRUN -> [SKIP][54] ([fdo#109271]) +315 similar issues
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-snb7/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-indfb-draw-render:
- shard-iclb: NOTRUN -> [SKIP][55] ([fdo#109280]) +12 similar issues
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb6/igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-indfb-draw-render.html

* igt@kms_frontbuffer_tracking@psr-1p-primscrn-spr-indfb-draw-mmap-cpu:
- shard-kbl: NOTRUN -> [SKIP][56] ([fdo#109271]) +55 similar issues
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-kbl2/igt@kms_frontbuffer_tracking@psr-1p-primscrn-spr-indfb-draw-mmap-cpu.html

* igt@kms_invalid_dotclock:
- shard-tglb: NOTRUN -> [SKIP][57] ([fdo#110577])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb5/igt@kms_invalid_dotclock.html
- shard-iclb: NOTRUN -> [SKIP][58] ([fdo#109310])
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb4/igt@kms_invalid_dotclock.html

* igt@kms_pipe_b_c_ivb@enable-pipe-c-while-b-has-3-lanes:
- shard-iclb: NOTRUN -> [SKIP][59] ([fdo#109289])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb7/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-alpha-transparent-fb:
- shard-apl: NOTRUN -> [FAIL][60] ([i915#265])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl1/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-alpha-7efc:
- shard-apl: NOTRUN -> [FAIL][61] ([fdo#108145] / [i915#265]) +1 similar issue
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl1/igt@[email protected]

* igt@kms_plane_multiple@atomic-pipe-b-tiling-yf:
- shard-tglb: NOTRUN -> [SKIP][62] ([fdo#111615])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb1/igt@[email protected]

* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-4:
- shard-apl: NOTRUN -> [SKIP][63] ([fdo#109271] / [i915#658]) +5 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl8/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-2:
- shard-glk: NOTRUN -> [SKIP][64] ([fdo#109271] / [i915#658])
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk5/igt@[email protected]

* igt@kms_psr@psr2_cursor_mmap_cpu:
- shard-iclb: NOTRUN -> [SKIP][65] ([fdo#109441])
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb4/igt@kms_psr@psr2_cursor_mmap_cpu.html

* igt@kms_psr@psr2_cursor_plane_move:
- shard-iclb: [PASS][66] -> [SKIP][67] ([fdo#109441]) +1 similar issue
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb2/igt@kms_psr@psr2_cursor_plane_move.html
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb4/igt@kms_psr@psr2_cursor_plane_move.html

* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> [FAIL][68] ([IGT#2])
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl7/igt@kms_sysfs_edid_timing.html

* igt@kms_vblank@pipe-d-wait-idle:
- shard-apl: NOTRUN -> [SKIP][69] ([fdo#109271] / [i915#533]) +2 similar issues
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl6/igt@[email protected]

* igt@nouveau_crc@pipe-a-source-outp-complete:
- shard-tglb: NOTRUN -> [SKIP][70] ([i915#2530])
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][71] ([i915#2530])
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb3/igt@[email protected]

* igt@nouveau_crc@pipe-d-source-outp-complete:
- shard-iclb: NOTRUN -> [SKIP][72] ([fdo#109278] / [i915#2530])
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb7/igt@[email protected]

* igt@prime_nv_api@i915_nv_import_vs_close:
- shard-iclb: NOTRUN -> [SKIP][73] ([fdo#109291])
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb1/igt@prime_nv_api@i915_nv_import_vs_close.html

* igt@prime_nv_api@i915_nv_reimport_twice_check_flink_name:
- shard-apl: NOTRUN -> [SKIP][74] ([fdo#109271]) +300 similar issues
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl1/igt@prime_nv_api@i915_nv_reimport_twice_check_flink_name.html

* igt@sysfs_clients@fair-0:
- shard-glk: NOTRUN -> [SKIP][75] ([fdo#109271] / [i915#2994])
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk2/igt@[email protected]

* igt@sysfs_clients@fair-1:
- shard-apl: NOTRUN -> [SKIP][76] ([fdo#109271] / [i915#2994]) +4 similar issues
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl3/igt@[email protected]

* igt@sysfs_clients@fair-3:
- shard-iclb: NOTRUN -> [SKIP][77] ([i915#2994])
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb1/igt@[email protected]

* igt@sysfs_clients@fair-7:
- shard-kbl: NOTRUN -> [SKIP][78] ([fdo#109271] / [i915#2994])
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-kbl4/igt@[email protected]

#### Possible fixes ####

* igt@gem_eio@unwedge-stress:
- shard-tglb: [TIMEOUT][79] ([i915#2369] / [i915#3063]) -> [PASS][80]
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-tglb3/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb3/igt@[email protected]

* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-apl: [SKIP][81] ([fdo#109271]) -> [PASS][82]
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl6/igt@gem_exec_fair@[email protected]
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none-vip@rcs0:
- shard-glk: [FAIL][83] ([i915#2842]) -> [PASS][84]
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk4/igt@gem_exec_fair@[email protected]
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk5/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-solo@rcs0:
- shard-iclb: [FAIL][85] ([i915#2842]) -> [PASS][86] +1 similar issue
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb4/igt@gem_exec_fair@[email protected]
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb8/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@bcs0:
- shard-tglb: [FAIL][87] ([i915#2842]) -> [PASS][88] +1 similar issue
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-tglb7/igt@gem_exec_fair@[email protected]
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs1:
- shard-kbl: [SKIP][89] ([fdo#109271]) -> [PASS][90]
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl4/igt@gem_exec_fair@[email protected]
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-kbl2/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vecs0:
- shard-kbl: [FAIL][91] ([i915#2842]) -> [PASS][92]
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl4/igt@gem_exec_fair@[email protected]
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-kbl2/igt@gem_exec_fair@[email protected]

* igt@gem_mmap_gtt@cpuset-medium-copy-odd:
- shard-iclb: [FAIL][93] ([i915#307]) -> [PASS][94] +1 similar issue
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb8/igt@[email protected]
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb7/igt@[email protected]

* igt@kms_big_fb@y-tiled-32bpp-rotate-0:
- shard-glk: [DMESG-WARN][95] ([i915#118] / [i915#95]) -> [PASS][96] +1 similar issue
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk2/igt@[email protected]
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk6/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-128x128-random:
- shard-kbl: [FAIL][97] ([i915#3444]) -> [PASS][98]
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl7/igt@[email protected]
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-kbl7/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-suspend:
- shard-kbl: [DMESG-WARN][99] ([i915#180]) -> [PASS][100]
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl3/igt@[email protected]
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-kbl7/igt@[email protected]

* igt@kms_flip@flip-vs-suspend@a-dp1:
- shard-apl: [DMESG-WARN][101] ([i915#180]) -> [PASS][102] +1 similar issue
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl1/igt@kms_flip@[email protected]
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl7/igt@kms_flip@[email protected]

* igt@kms_flip@plain-flip-fb-recreate-interruptible@a-hdmi-a1:
- shard-glk: [FAIL][103] ([i915#2122]) -> [PASS][104]
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk6/igt@kms_flip@[email protected]
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk1/igt@kms_flip@[email protected]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
- shard-snb: [SKIP][105] ([fdo#109271]) -> [PASS][106]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-snb7/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen.html
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-snb5/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen.html

* igt@kms_hdmi_inject@inject-audio:
- shard-tglb: [SKIP][107] ([i915#433]) -> [PASS][108]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-tglb2/igt@[email protected]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-tglb5/igt@[email protected]

* igt@kms_plane@plane-panning-bottom-right-suspend@pipe-b-planes:
- shard-iclb: [INCOMPLETE][109] ([i915#3622]) -> [PASS][110]
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb3/igt@kms_plane@[email protected]
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb5/igt@kms_plane@[email protected]

* igt@kms_plane@plane-position-hole-dpms@pipe-b-planes:
- shard-glk: [FAIL][111] ([i915#2472]) -> [PASS][112]
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk3/igt@kms_plane@[email protected]
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-glk8/igt@kms_plane@[email protected]

* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-iclb: [SKIP][113] ([fdo#109441]) -> [PASS][114]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb7/igt@kms_psr@psr2_sprite_mmap_gtt.html
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html

#### Warnings ####

* igt@i915_pm_rc6_residency@rc6-fence:
- shard-iclb: [WARN][115] ([i915#1804] / [i915#2684]) -> [WARN][116] ([i915#2684])
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb6/igt@[email protected]
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb5/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-2:
- shard-iclb: [SKIP][117] ([i915#658]) -> [SKIP][118] ([i915#2920]) +2 similar issues
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb6/igt@[email protected]
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb2/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-4:
- shard-iclb: [SKIP][119] ([i915#2920]) -> [SKIP][120] ([i915#658])
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb2/igt@[email protected]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-iclb8/igt@[email protected]

* igt@runner@aborted:
- shard-kbl: ([FAIL][121], [FAIL][122], [FAIL][123]) ([i915#1436] / [i915#1814] / [i915#2505] / [i915#3002] / [i915#3363]) -> [FAIL][124] ([i915#3002] / [i915#3363])
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl2/igt@[email protected]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl6/igt@[email protected]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl3/igt@[email protected]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-kbl7/igt@[email protected]
- shard-apl: ([FAIL][125], [FAIL][126], [FAIL][127], [FAIL][128], [FAIL][129], [FAIL][130]) ([fdo#109271] / [i915#180] / [i915#1814] / [i915#3002] / [i915#3363]) -> ([FAIL][131], [FAIL][132], [FAIL][133]) ([i915#180] / [i915#3002] / [i915#3363])
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl3/igt@[email protected]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl1/igt@[email protected]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl3/igt@[email protected]
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl1/igt@[email protected]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl6/igt@[email protected]
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl6/igt@[email protected]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl7/igt@[email protected]
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl8/igt@[email protected]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5943/shard-apl3/igt@[email protected]

48 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#78 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev5)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev5)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10246 -> IGTPW_5944
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_5944:

### IGT changes ###

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@i915_selftest@live@execlists:
- {fi-tgl-1115g4}: [PASS][1] -> [INCOMPLETE][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/fi-tgl-1115g4/igt@i915_selftest@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/fi-tgl-1115g4/igt@i915_selftest@[email protected]

Known issues
------------

Here are the changes found in IGTPW_5944 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@amdgpu/amd_basic@semaphore:
- fi-bdw-5557u: NOTRUN -> [SKIP][3] ([fdo#109271]) +27 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/fi-bdw-5557u/igt@amdgpu/[email protected]

* igt@amdgpu/amd_cs_nop@sync-fork-compute0:
- fi-kbl-soraka: NOTRUN -> [SKIP][4] ([fdo#109271]) +8 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/fi-kbl-soraka/igt@amdgpu/[email protected]

* igt@core_hotunplug@unbind-rebind:
- fi-bdw-5557u: NOTRUN -> [WARN][5] ([i915#2283])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/fi-bdw-5557u/igt@[email protected]

* igt@debugfs_test@read_all_entries:
- fi-cfl-8109u: [PASS][6] -> [DMESG-WARN][7] ([i915#203] / [i915#262])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/fi-cfl-8109u/igt@debugfs_test@read_all_entries.html
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/fi-cfl-8109u/igt@debugfs_test@read_all_entries.html

* igt@gem_exec_suspend@basic-s0:
- fi-cfl-8109u: [PASS][8] -> [DMESG-WARN][9] ([i915#262])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/fi-cfl-8109u/igt@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/fi-cfl-8109u/igt@[email protected]

* igt@kms_chamelium@dp-crc-fast:
- fi-bdw-5557u: NOTRUN -> [SKIP][10] ([fdo#109271] / [fdo#111827]) +8 similar issues
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/fi-bdw-5557u/igt@[email protected]

#### Possible fixes ####

* igt@i915_selftest@live@gt_heartbeat:
- fi-cml-s: [DMESG-FAIL][11] ([i915#2291] / [i915#541]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/fi-cml-s/igt@i915_selftest@live@gt_heartbeat.html
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/fi-cml-s/igt@i915_selftest@live@gt_heartbeat.html

* igt@kms_chamelium@dp-crc-fast:
- fi-kbl-7500u: [FAIL][13] ([i915#1372]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/fi-kbl-7500u/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/fi-kbl-7500u/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1372]: https://gitlab.freedesktop.org/drm/intel/issues/1372
[i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#203]: https://gitlab.freedesktop.org/drm/intel/issues/203
[i915#2283]: https://gitlab.freedesktop.org/drm/intel/issues/2283
[i915#2291]: https://gitlab.freedesktop.org/drm/intel/issues/2291
[i915#262]: https://gitlab.freedesktop.org/drm/intel/issues/262
[i915#2966]: https://gitlab.freedesktop.org/drm/intel/issues/2966
[i915#541]: https://gitlab.freedesktop.org/drm/intel/issues/541

Participating hosts (42 -> 36)
------------------------------

Missing (6): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-dg1-1 fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6113 -> IGTPW_5944

CI-20190529: 20190529
CI_DRM_10246: 3c00434f0d7ff138a7b56d5a901586d4473e10a7 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5944: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/index.html
IGT_6113: 138a29e30277b1039e9934fca5c782dc1e7a9f99 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#79 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev5)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev5)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10246_full -> IGTPW_5944_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/index.html

Known issues
------------

Here are the changes found in IGTPW_5944_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_create@create-massive:
- shard-snb: NOTRUN -> [DMESG-WARN][1] ([i915#3002])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-snb2/igt@[email protected]

* igt@gem_ctx_persistence@smoketest:
- shard-snb: NOTRUN -> [SKIP][2] ([fdo#109271] / [i915#1099]) +2 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-snb6/igt@[email protected]

* igt@gem_eio@unwedge-stress:
- shard-iclb: [PASS][3] -> [TIMEOUT][4] ([i915#2369] / [i915#2481] / [i915#3070])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb6/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb5/igt@[email protected]

* igt@gem_exec_fair@basic-deadline:
- shard-kbl: [PASS][5] -> [FAIL][6] ([i915#2846])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl7/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl2/igt@[email protected]

* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-kbl: [PASS][7] -> [SKIP][8] ([fdo#109271])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl6/igt@gem_exec_fair@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none@vcs0:
- shard-kbl: [PASS][9] -> [FAIL][10] ([i915#2842]) +2 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl1/igt@gem_exec_fair@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none@vcs1:
- shard-iclb: NOTRUN -> [FAIL][11] ([i915#2842]) +4 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb2/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs0:
- shard-tglb: [PASS][12] -> [FAIL][13] ([i915#2842])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-tglb7/igt@gem_exec_fair@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-glk: [PASS][14] -> [FAIL][15] ([i915#2842]) +3 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk7/igt@gem_exec_fair@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_params@secure-non-root:
- shard-iclb: NOTRUN -> [SKIP][16] ([fdo#112283])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb2/igt@[email protected]

* igt@gem_exec_reloc@basic-wide-active@bcs0:
- shard-glk: NOTRUN -> [FAIL][17] ([i915#3633]) +3 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk3/igt@gem_exec_reloc@[email protected]

* igt@gem_exec_reloc@basic-wide-active@vcs1:
- shard-iclb: NOTRUN -> [FAIL][18] ([i915#3633])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb1/igt@gem_exec_reloc@[email protected]

* igt@gem_exec_whisper@basic-fds-forked:
- shard-glk: [PASS][19] -> [DMESG-WARN][20] ([i915#118] / [i915#95]) +2 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk4/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk8/igt@[email protected]

* igt@gem_userptr_blits@dmabuf-sync:
- shard-kbl: NOTRUN -> [SKIP][21] ([fdo#109271] / [i915#3323])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][22] ([i915#3323])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb5/igt@[email protected]
- shard-apl: NOTRUN -> [SKIP][23] ([fdo#109271] / [i915#3323])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl3/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][24] ([fdo#109271] / [i915#3323])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk8/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][25] ([i915#3323])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb6/igt@[email protected]

* igt@gen9_exec_parse@basic-rejected-ctx-param:
- shard-iclb: NOTRUN -> [SKIP][26] ([fdo#112306])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb8/igt@[email protected]

* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
- shard-apl: NOTRUN -> [SKIP][27] ([fdo#109271] / [i915#1937])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl6/igt@i915_pm_lpsp@[email protected]

* igt@kms_big_fb@linear-16bpp-rotate-270:
- shard-tglb: NOTRUN -> [SKIP][28] ([fdo#111614])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb3/igt@[email protected]

* igt@kms_big_fb@x-tiled-64bpp-rotate-0:
- shard-iclb: [PASS][29] -> [DMESG-WARN][30] ([i915#3621])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb7/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb1/igt@[email protected]

* igt@kms_big_fb@y-tiled-64bpp-rotate-90:
- shard-iclb: NOTRUN -> [SKIP][31] ([fdo#110725] / [fdo#111614]) +1 similar issue
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb1/igt@[email protected]

* igt@kms_chamelium@hdmi-audio:
- shard-tglb: NOTRUN -> [SKIP][32] ([fdo#109284] / [fdo#111827]) +1 similar issue
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb5/igt@[email protected]

* igt@kms_chamelium@hdmi-cmp-planar-formats:
- shard-iclb: NOTRUN -> [SKIP][33] ([fdo#109284] / [fdo#111827]) +3 similar issues
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb2/igt@[email protected]

* igt@kms_chamelium@vga-hpd:
- shard-apl: NOTRUN -> [SKIP][34] ([fdo#109271] / [fdo#111827]) +20 similar issues
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl7/igt@[email protected]

* igt@kms_color@pipe-d-ctm-0-25:
- shard-iclb: NOTRUN -> [SKIP][35] ([fdo#109278] / [i915#1149])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb3/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-blue-to-red:
- shard-glk: NOTRUN -> [SKIP][36] ([fdo#109271] / [fdo#111827]) +4 similar issues
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk3/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-negative:
- shard-kbl: NOTRUN -> [SKIP][37] ([fdo#109271] / [fdo#111827]) +2 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl3/igt@[email protected]

* igt@kms_color_chamelium@pipe-invalid-ctm-matrix-sizes:
- shard-snb: NOTRUN -> [SKIP][38] ([fdo#109271] / [fdo#111827]) +21 similar issues
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-snb7/igt@[email protected]

* igt@kms_content_protection@lic:
- shard-apl: NOTRUN -> [TIMEOUT][39] ([i915#1319]) +1 similar issue
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][40] ([fdo#109300] / [fdo#111066])
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb7/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-512x512-rapid-movement:
- shard-iclb: NOTRUN -> [SKIP][41] ([fdo#109278] / [fdo#109279]) +1 similar issue
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb7/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-128x42-random:
- shard-kbl: [PASS][42] -> [FAIL][43] ([i915#3444])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl1/igt@[email protected]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl3/igt@[email protected]
- shard-glk: [PASS][44] -> [FAIL][45] ([i915#3444])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk1/igt@[email protected]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk3/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-32x10-onscreen:
- shard-tglb: NOTRUN -> [SKIP][46] ([i915#3359]) +1 similar issue
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb3/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-512x512-random:
- shard-tglb: NOTRUN -> [SKIP][47] ([fdo#109279] / [i915#3359]) +1 similar issue
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb1/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-32x32-offscreen:
- shard-tglb: NOTRUN -> [SKIP][48] ([i915#3319])
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb8/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-32x32-rapid-movement:
- shard-iclb: NOTRUN -> [SKIP][49] ([fdo#109278]) +14 similar issues
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb1/igt@[email protected]

* igt@kms_cursor_legacy@cursorb-vs-flipa-atomic-transitions-varying-size:
- shard-iclb: NOTRUN -> [SKIP][50] ([fdo#109274] / [fdo#109278])
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb5/igt@kms_cursor_legacy@cursorb-vs-flipa-atomic-transitions-varying-size.html

* igt@kms_flip@2x-flip-vs-expired-vblank@ac-hdmi-a1-hdmi-a2:
- shard-glk: [PASS][51] -> [FAIL][52] ([i915#79])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk3/igt@kms_flip@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk8/igt@kms_flip@[email protected]

* igt@kms_flip@2x-flip-vs-rmfb:
- shard-tglb: NOTRUN -> [SKIP][53] ([fdo#111825]) +10 similar issues
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb5/igt@[email protected]

* igt@kms_flip@2x-flip-vs-suspend:
- shard-iclb: NOTRUN -> [SKIP][54] ([fdo#109274])
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb1/igt@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs:
- shard-apl: NOTRUN -> [SKIP][55] ([fdo#109271] / [i915#2672]) +1 similar issue
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl1/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs.html

* igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile:
- shard-snb: NOTRUN -> [SKIP][56] ([fdo#109271]) +307 similar issues
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-snb5/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-1p-indfb-fliptrack-mmap-gtt:
- shard-glk: [PASS][57] -> [FAIL][58] ([i915#2546])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk2/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk1/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-indfb-draw-render:
- shard-iclb: NOTRUN -> [SKIP][59] ([fdo#109280]) +12 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb7/igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-indfb-draw-render.html

* igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-indfb-pgflip-blt:
- shard-glk: NOTRUN -> [SKIP][60] ([fdo#109271]) +58 similar issues
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk9/igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-indfb-pgflip-blt.html

* igt@kms_frontbuffer_tracking@psr-1p-primscrn-spr-indfb-draw-mmap-cpu:
- shard-kbl: NOTRUN -> [SKIP][61] ([fdo#109271]) +52 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl7/igt@kms_frontbuffer_tracking@psr-1p-primscrn-spr-indfb-draw-mmap-cpu.html

* igt@kms_invalid_dotclock:
- shard-tglb: NOTRUN -> [SKIP][62] ([fdo#110577])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb5/igt@kms_invalid_dotclock.html
- shard-iclb: NOTRUN -> [SKIP][63] ([fdo#109310])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb8/igt@kms_invalid_dotclock.html

* igt@kms_pipe_b_c_ivb@enable-pipe-c-while-b-has-3-lanes:
- shard-iclb: NOTRUN -> [SKIP][64] ([fdo#109289])
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb2/igt@[email protected]

* igt@kms_plane@plane-position-hole@pipe-a-planes:
- shard-kbl: [PASS][65] -> [FAIL][66] ([i915#2472])
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl3/igt@kms_plane@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl7/igt@kms_plane@[email protected]
- shard-apl: [PASS][67] -> [FAIL][68] ([i915#2472])
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl7/igt@kms_plane@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl8/igt@kms_plane@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-constant-alpha-max:
- shard-apl: NOTRUN -> [FAIL][69] ([fdo#108145] / [i915#265]) +2 similar issues
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl7/igt@[email protected]

* igt@kms_plane_multiple@atomic-pipe-b-tiling-yf:
- shard-tglb: NOTRUN -> [SKIP][70] ([fdo#111615])
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb8/igt@[email protected]

* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-2:
- shard-apl: NOTRUN -> [SKIP][71] ([fdo#109271] / [i915#658]) +4 similar issues
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl7/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-2:
- shard-glk: NOTRUN -> [SKIP][72] ([fdo#109271] / [i915#658])
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk1/igt@[email protected]

* igt@kms_psr@psr2_cursor_plane_move:
- shard-iclb: [PASS][73] -> [SKIP][74] ([fdo#109441]) +1 similar issue
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb2/igt@kms_psr@psr2_cursor_plane_move.html
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb7/igt@kms_psr@psr2_cursor_plane_move.html

* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> [FAIL][75] ([IGT#2])
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl7/igt@kms_sysfs_edid_timing.html

* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-kbl: [PASS][76] -> [INCOMPLETE][77] ([i915#155])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl4/igt@[email protected]
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl3/igt@[email protected]

* igt@kms_vblank@pipe-c-ts-continuation-suspend:
- shard-apl: [PASS][78] -> [DMESG-WARN][79] ([i915#180]) +2 similar issues
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl1/igt@[email protected]
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl1/igt@[email protected]

* igt@kms_vblank@pipe-d-wait-idle:
- shard-apl: NOTRUN -> [SKIP][80] ([fdo#109271] / [i915#533]) +2 similar issues
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl1/igt@[email protected]

* igt@nouveau_crc@pipe-a-source-outp-complete:
- shard-tglb: NOTRUN -> [SKIP][81] ([i915#2530])
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][82] ([i915#2530])
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb5/igt@[email protected]

* igt@nouveau_crc@pipe-b-ctx-flip-skip-current-frame:
- shard-apl: NOTRUN -> [SKIP][83] ([fdo#109271]) +267 similar issues
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl8/igt@[email protected]

* igt@nouveau_crc@pipe-d-source-outp-complete:
- shard-iclb: NOTRUN -> [SKIP][84] ([fdo#109278] / [i915#2530])
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb3/igt@[email protected]

* igt@prime_nv_api@i915_nv_import_vs_close:
- shard-iclb: NOTRUN -> [SKIP][85] ([fdo#109291])
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb6/igt@prime_nv_api@i915_nv_import_vs_close.html

* igt@sysfs_clients@fair-0:
- shard-glk: NOTRUN -> [SKIP][86] ([fdo#109271] / [i915#2994])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk3/igt@[email protected]

* igt@sysfs_clients@fair-7:
- shard-kbl: NOTRUN -> [SKIP][87] ([fdo#109271] / [i915#2994])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl6/igt@[email protected]

* igt@sysfs_clients@recycle-many:
- shard-apl: NOTRUN -> [SKIP][88] ([fdo#109271] / [i915#2994]) +1 similar issue
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl1/igt@[email protected]

#### Possible fixes ####

* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-apl: [SKIP][89] ([fdo#109271]) -> [PASS][90]
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl6/igt@gem_exec_fair@[email protected]
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-tglb: [FAIL][91] ([i915#2842]) -> [PASS][92] +2 similar issues
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-tglb6/igt@gem_exec_fair@[email protected]
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-tglb6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs1:
- shard-kbl: [SKIP][93] ([fdo#109271]) -> [PASS][94]
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl4/igt@gem_exec_fair@[email protected]
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vecs0:
- shard-kbl: [FAIL][95] ([i915#2842]) -> [PASS][96]
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl4/igt@gem_exec_fair@[email protected]
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-iclb: [FAIL][97] ([i915#2849]) -> [PASS][98]
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb3/igt@gem_exec_fair@[email protected]
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb4/igt@gem_exec_fair@[email protected]

* igt@gem_mmap_gtt@cpuset-big-copy:
- shard-iclb: [FAIL][99] ([i915#307]) -> [PASS][100]
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb7/igt@[email protected]
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb6/igt@[email protected]

* igt@kms_big_fb@y-tiled-32bpp-rotate-0:
- shard-glk: [DMESG-WARN][101] ([i915#118] / [i915#95]) -> [PASS][102]
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk2/igt@[email protected]
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk5/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-128x128-random:
- shard-kbl: [FAIL][103] ([i915#3444]) -> [PASS][104]
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl7/igt@[email protected]
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl3/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-suspend:
- shard-kbl: [DMESG-WARN][105] ([i915#180]) -> [PASS][106]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-kbl3/igt@[email protected]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-kbl4/igt@[email protected]

* igt@kms_flip@plain-flip-fb-recreate-interruptible@a-hdmi-a1:
- shard-glk: [FAIL][107] ([i915#2122]) -> [PASS][108]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk6/igt@kms_flip@[email protected]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk7/igt@kms_flip@[email protected]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
- shard-snb: [SKIP][109] ([fdo#109271]) -> [PASS][110]
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-snb7/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen.html
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-snb7/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen.html

* igt@kms_hdr@bpc-switch-suspend:
- shard-apl: [DMESG-WARN][111] ([i915#180]) -> [PASS][112] +3 similar issues
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-apl3/igt@[email protected]
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-apl2/igt@[email protected]

* igt@kms_plane@plane-panning-bottom-right-suspend@pipe-b-planes:
- shard-iclb: [INCOMPLETE][113] ([i915#3622]) -> [PASS][114]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb3/igt@kms_plane@[email protected]
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb2/igt@kms_plane@[email protected]

* igt@kms_plane@plane-position-hole-dpms@pipe-b-planes:
- shard-glk: [FAIL][115] ([i915#2472]) -> [PASS][116]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-glk3/igt@kms_plane@[email protected]
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-glk5/igt@kms_plane@[email protected]

* igt@kms_psr@psr2_sprite_blt:
- shard-iclb: [SKIP][117] ([fdo#109441]) -> [PASS][118] +2 similar issues
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb5/igt@kms_psr@psr2_sprite_blt.html
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb2/igt@kms_psr@psr2_sprite_blt.html

#### Warnings ####

* igt@i915_pm_rc6_residency@rc6-fence:
- shard-iclb: [WARN][119] ([i915#1804] / [i915#2684]) -> [WARN][120] ([i915#2684])
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb6/igt@[email protected]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb8/igt@[email protected]

* igt@kms_psr2_sf@cursor-plane-update-sf:
- shard-iclb: [SKIP][121] ([i915#2920]) -> [SKIP][122] ([i915#658])
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb2/igt@[email protected]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb5/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-4:
- shard-iclb: [SKIP][123] ([i915#658]) -> [SKIP][124] ([i915#2920]) +1 similar issue
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10246/shard-iclb5/igt@[email protected]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5944/shard-iclb2/igt@[email protected]

48 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#80 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev6)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev6)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10253 -> IGTPW_5948
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_5948:

### IGT changes ###

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@i915_selftest@live@migrate:
- {fi-tgl-dsi}: [PASS][1] -> [DMESG-WARN][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/fi-tgl-dsi/igt@i915_selftest@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-tgl-dsi/igt@i915_selftest@[email protected]

Known issues
------------

Here are the changes found in IGTPW_5948 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@debugfs_test@read_all_entries:
- fi-cfl-8109u: [PASS][3] -> [DMESG-WARN][4] ([i915#203] / [i915#262])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/fi-cfl-8109u/igt@debugfs_test@read_all_entries.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-cfl-8109u/igt@debugfs_test@read_all_entries.html

* igt@gem_exec_gttfill@basic:
- fi-bsw-n3050: NOTRUN -> [SKIP][5] ([fdo#109271])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-bsw-n3050/igt@[email protected]

* igt@gem_exec_suspend@basic-s0:
- fi-cfl-8109u: [PASS][6] -> [DMESG-WARN][7] ([i915#262])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/fi-cfl-8109u/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-cfl-8109u/igt@[email protected]

* igt@gem_exec_suspend@basic-s3:
- fi-bsw-n3050: NOTRUN -> [INCOMPLETE][8] ([i915#3159])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-bsw-n3050/igt@[email protected]

* igt@i915_selftest@live@hangcheck:
- fi-icl-y: [PASS][9] -> [INCOMPLETE][10] ([i915#2782])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/fi-icl-y/igt@i915_selftest@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-icl-y/igt@i915_selftest@[email protected]

* igt@runner@aborted:
- fi-icl-y: NOTRUN -> [FAIL][11] ([i915#2782])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-icl-y/igt@[email protected]

#### Possible fixes ####

* igt@i915_selftest@live@execlists:
- fi-cfl-8109u: [DMESG-WARN][12] ([i915#203]) -> [PASS][13] +3 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/fi-cfl-8109u/igt@i915_selftest@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-cfl-8109u/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@hangcheck:
- {fi-hsw-gt1}: [DMESG-WARN][14] ([i915#3303]) -> [PASS][15]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/fi-hsw-gt1/igt@i915_selftest@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-hsw-gt1/igt@i915_selftest@[email protected]

* igt@kms_chamelium@common-hpd-after-suspend:
- fi-kbl-7500u: [DMESG-FAIL][16] ([i915#165]) -> [PASS][17]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/fi-kbl-7500u/igt@[email protected]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-kbl-7500u/igt@[email protected]

* igt@kms_chamelium@dp-crc-fast:
- fi-kbl-7500u: [FAIL][18] ([i915#1372]) -> [PASS][19]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/fi-kbl-7500u/igt@[email protected]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/fi-kbl-7500u/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1372]: https://gitlab.freedesktop.org/drm/intel/issues/1372
[i915#165]: https://gitlab.freedesktop.org/drm/intel/issues/165
[i915#203]: https://gitlab.freedesktop.org/drm/intel/issues/203
[i915#262]: https://gitlab.freedesktop.org/drm/intel/issues/262
[i915#2782]: https://gitlab.freedesktop.org/drm/intel/issues/2782
[i915#2867]: https://gitlab.freedesktop.org/drm/intel/issues/2867
[i915#3159]: https://gitlab.freedesktop.org/drm/intel/issues/3159
[i915#3303]: https://gitlab.freedesktop.org/drm/intel/issues/3303

Participating hosts (44 -> 40)
------------------------------

Additional (1): fi-bsw-n3050
Missing (5): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6115 -> IGTPW_5948

CI-20190529: 20190529
CI_DRM_10253: 9e675b3a06dd8f510d3f22073a925c69f28a75db @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5948: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/index.html
IGT_6115: 4ef420186b82f1a6d9c9b69d2f8de4fd100a2af3 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#81 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev6)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev6)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10253_full -> IGTPW_5948_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/index.html

Known issues
------------

Here are the changes found in IGTPW_5948_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@feature_discovery@display-3x:
- shard-glk: NOTRUN -> [SKIP][1] ([fdo#109271]) +98 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk7/igt@[email protected]

* igt@gem_ctx_persistence@legacy-engines-mixed-process:
- shard-snb: NOTRUN -> [SKIP][2] ([fdo#109271] / [i915#1099]) +7 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-snb5/igt@[email protected]

* igt@gem_exec_fair@basic-deadline:
- shard-tglb: [PASS][3] -> [FAIL][4] ([i915#2846])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-tglb2/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb7/igt@[email protected]

* igt@gem_exec_fair@basic-none@vecs0:
- shard-kbl: [PASS][5] -> [FAIL][6] ([i915#2842]) +1 similar issue
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl1/igt@gem_exec_fair@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl4/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-tglb: [PASS][7] -> [FAIL][8] ([i915#2842]) +1 similar issue
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-tglb1/igt@gem_exec_fair@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb2/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs0:
- shard-kbl: [PASS][9] -> [SKIP][10] ([fdo#109271])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl3/igt@gem_exec_fair@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl4/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vecs0:
- shard-glk: [PASS][11] -> [FAIL][12] ([i915#2842])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-glk1/igt@gem_exec_fair@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_flush@basic-batch-kernel-default-cmd:
- shard-snb: NOTRUN -> [SKIP][13] ([fdo#109271]) +417 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-snb5/igt@[email protected]

* igt@gem_exec_whisper@basic-forked:
- shard-glk: [PASS][14] -> [DMESG-WARN][15] ([i915#118] / [i915#95]) +2 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-glk2/igt@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk6/igt@[email protected]

* igt@gem_mmap_offset@clear:
- shard-iclb: [PASS][16] -> [FAIL][17] ([i915#3160])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb8/igt@[email protected]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb6/igt@[email protected]

* igt@gem_pread@exhaustion:
- shard-apl: NOTRUN -> [WARN][18] ([i915#2658]) +1 similar issue
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl7/igt@[email protected]
- shard-kbl: NOTRUN -> [WARN][19] ([i915#2658])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl3/igt@[email protected]

* igt@gem_render_copy@y-tiled-ccs-to-yf-tiled-mc-ccs:
- shard-iclb: NOTRUN -> [SKIP][20] ([i915#768])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb4/igt@[email protected]

* igt@gem_userptr_blits@dmabuf-sync:
- shard-apl: NOTRUN -> [SKIP][21] ([fdo#109271] / [i915#3323])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl8/igt@[email protected]

* igt@gem_userptr_blits@vma-merge:
- shard-snb: NOTRUN -> [FAIL][22] ([i915#2724])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-snb2/igt@[email protected]

* igt@gen7_exec_parse@cmd-crossing-page:
- shard-tglb: NOTRUN -> [SKIP][23] ([fdo#109289]) +1 similar issue
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb8/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][24] ([fdo#109289]) +1 similar issue
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb7/igt@[email protected]

* igt@gen9_exec_parse@cmd-crossing-page:
- shard-tglb: NOTRUN -> [SKIP][25] ([fdo#112306])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb8/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][26] ([fdo#112306])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb5/igt@[email protected]

* igt@i915_pm_dc@dc6-dpms:
- shard-kbl: NOTRUN -> [FAIL][27] ([i915#454])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl2/igt@[email protected]

* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
- shard-apl: NOTRUN -> [SKIP][28] ([fdo#109271] / [i915#1937])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl7/igt@i915_pm_lpsp@[email protected]

* igt@i915_pm_rpm@modeset-lpsp-stress:
- shard-apl: NOTRUN -> [SKIP][29] ([fdo#109271]) +243 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl2/igt@[email protected]

* igt@i915_suspend@forcewake:
- shard-apl: [PASS][30] -> [DMESG-WARN][31] ([i915#180])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-apl8/igt@[email protected]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl6/igt@[email protected]

* igt@kms_big_fb@linear-32bpp-rotate-180:
- shard-glk: NOTRUN -> [DMESG-WARN][32] ([i915#118] / [i915#95])
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk2/igt@[email protected]

* igt@kms_big_fb@x-tiled-32bpp-rotate-270:
- shard-iclb: NOTRUN -> [SKIP][33] ([fdo#110725] / [fdo#111614])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb3/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][34] ([fdo#111614])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb6/igt@[email protected]

* igt@kms_big_fb@yf-tiled-8bpp-rotate-270:
- shard-iclb: NOTRUN -> [SKIP][35] ([fdo#110723])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb2/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][36] ([fdo#111615]) +1 similar issue
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb1/igt@[email protected]

* igt@kms_chamelium@dp-mode-timings:
- shard-apl: NOTRUN -> [SKIP][37] ([fdo#109271] / [fdo#111827]) +26 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl1/igt@[email protected]

* igt@kms_chamelium@hdmi-mode-timings:
- shard-kbl: NOTRUN -> [SKIP][38] ([fdo#109271] / [fdo#111827]) +14 similar issues
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][39] ([fdo#109284] / [fdo#111827]) +4 similar issues
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb7/igt@[email protected]

* igt@kms_chamelium@vga-hpd-enable-disable-mode:
- shard-glk: NOTRUN -> [SKIP][40] ([fdo#109271] / [fdo#111827]) +12 similar issues
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk4/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-blue-to-red:
- shard-snb: NOTRUN -> [SKIP][41] ([fdo#109271] / [fdo#111827]) +27 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-snb2/igt@[email protected]

* igt@kms_color_chamelium@pipe-d-ctm-limited-range:
- shard-tglb: NOTRUN -> [SKIP][42] ([fdo#109284] / [fdo#111827]) +5 similar issues
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][43] ([fdo#109278] / [fdo#109284] / [fdo#111827])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb6/igt@[email protected]

* igt@kms_content_protection@atomic-dpms:
- shard-tglb: NOTRUN -> [SKIP][44] ([fdo#111828])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][45] ([fdo#109300] / [fdo#111066])
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb2/igt@[email protected]

* igt@kms_content_protection@dp-mst-lic-type-0:
- shard-iclb: NOTRUN -> [SKIP][46] ([i915#3116])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb7/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][47] ([i915#3116])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb8/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-max-size-sliding:
- shard-iclb: NOTRUN -> [SKIP][48] ([fdo#109278]) +10 similar issues
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb2/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-32x32-sliding:
- shard-tglb: NOTRUN -> [SKIP][49] ([i915#3319])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb8/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-max-size-rapid-movement:
- shard-tglb: NOTRUN -> [SKIP][50] ([i915#3359]) +2 similar issues
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb1/igt@[email protected]

* igt@kms_cursor_legacy@cursorb-vs-flipb-legacy:
- shard-iclb: NOTRUN -> [SKIP][51] ([fdo#109274] / [fdo#109278]) +1 similar issue
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb2/igt@[email protected]

* igt@kms_fbcon_fbt@fbc-suspend:
- shard-kbl: [PASS][52] -> [INCOMPLETE][53] ([i915#155] / [i915#180] / [i915#636])
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl1/igt@[email protected]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl7/igt@[email protected]

* igt@kms_flip@2x-flip-vs-suspend:
- shard-iclb: NOTRUN -> [SKIP][54] ([fdo#109274]) +1 similar issue
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb7/igt@[email protected]

* igt@kms_flip@flip-vs-suspend@c-dp1:
- shard-kbl: NOTRUN -> [DMESG-WARN][55] ([i915#180]) +4 similar issues
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl4/igt@kms_flip@[email protected]
- shard-apl: NOTRUN -> [DMESG-WARN][56] ([i915#180]) +2 similar issues
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl2/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile:
- shard-kbl: NOTRUN -> [SKIP][57] ([fdo#109271] / [i915#2642])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl3/igt@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile:
- shard-apl: NOTRUN -> [SKIP][58] ([fdo#109271] / [i915#2642])
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-cur-indfb-onoff:
- shard-tglb: NOTRUN -> [SKIP][59] ([fdo#111825]) +15 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb5/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite:
- shard-iclb: [PASS][60] -> [FAIL][61] ([i915#2546] / [i915#49])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb5/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite.html
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb8/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite.html

* igt@kms_frontbuffer_tracking@psr-2p-primscrn-shrfb-plflip-blt:
- shard-iclb: NOTRUN -> [SKIP][62] ([fdo#109280]) +11 similar issues
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb6/igt@[email protected]

* igt@kms_panel_fitting@legacy:
- shard-kbl: NOTRUN -> [SKIP][63] ([fdo#109271]) +157 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl2/igt@[email protected]

* igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d:
- shard-apl: NOTRUN -> [SKIP][64] ([fdo#109271] / [i915#533]) +4 similar issues
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl7/igt@[email protected]

* igt@kms_pipe_crc_basic@hang-read-crc-pipe-d:
- shard-kbl: NOTRUN -> [SKIP][65] ([fdo#109271] / [i915#533])
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl3/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][66] ([fdo#109271] / [i915#533])
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk5/igt@[email protected]

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- shard-kbl: [PASS][67] -> [DMESG-WARN][68] ([i915#180]) +2 similar issues
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl4/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl6/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-alpha-basic:
- shard-apl: NOTRUN -> [FAIL][69] ([fdo#108145] / [i915#265]) +2 similar issues
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl2/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-coverage-vs-premult-vs-constant:
- shard-apl: [PASS][70] -> [FAIL][71] ([fdo#108145] / [i915#265]) +1 similar issue
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-apl8/igt@kms_plane_alpha_blend@pipe-b-coverage-vs-premult-vs-constant.html
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl8/igt@kms_plane_alpha_blend@pipe-b-coverage-vs-premult-vs-constant.html
- shard-kbl: [PASS][72] -> [FAIL][73] ([fdo#108145] / [i915#265])
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl2/igt@kms_plane_alpha_blend@pipe-b-coverage-vs-premult-vs-constant.html
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl1/igt@kms_plane_alpha_blend@pipe-b-coverage-vs-premult-vs-constant.html

* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-max:
- shard-glk: NOTRUN -> [FAIL][74] ([fdo#108145] / [i915#265]) +1 similar issue
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk6/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-coverage-vs-premult-vs-constant:
- shard-kbl: NOTRUN -> [FAIL][75] ([fdo#108145] / [i915#265]) +3 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl2/igt@kms_plane_alpha_blend@pipe-c-coverage-vs-premult-vs-constant.html

* igt@kms_plane_cursor@pipe-b-overlay-size-256:
- shard-iclb: [PASS][76] -> [FAIL][77] ([i915#2657])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb4/igt@[email protected]
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb8/igt@[email protected]
- shard-glk: [PASS][78] -> [FAIL][79] ([i915#2657])
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-glk3/igt@[email protected]
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk9/igt@[email protected]

* igt@kms_plane_lowres@pipe-b-tiling-x:
- shard-iclb: NOTRUN -> [SKIP][80] ([i915#3536]) +1 similar issue
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb1/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][81] ([i915#3536])
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb3/igt@[email protected]

* igt@kms_plane_multiple@atomic-pipe-d-tiling-yf:
- shard-tglb: NOTRUN -> [SKIP][82] ([fdo#112054])
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb7/igt@[email protected]

* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-3:
- shard-apl: NOTRUN -> [SKIP][83] ([fdo#109271] / [i915#658]) +3 similar issues
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl3/igt@[email protected]

* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-5:
- shard-glk: NOTRUN -> [SKIP][84] ([fdo#109271] / [i915#658]) +2 similar issues
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk6/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][85] ([i915#2920])
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][86] ([i915#658])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb6/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-1:
- shard-kbl: NOTRUN -> [SKIP][87] ([fdo#109271] / [i915#658]) +1 similar issue
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl6/igt@[email protected]

* igt@kms_psr@psr2_cursor_mmap_cpu:
- shard-iclb: NOTRUN -> [SKIP][88] ([fdo#109441])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb5/igt@kms_psr@psr2_cursor_mmap_cpu.html
- shard-tglb: NOTRUN -> [FAIL][89] ([i915#132] / [i915#3467])
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb8/igt@kms_psr@psr2_cursor_mmap_cpu.html

* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-iclb: [PASS][90] -> [SKIP][91] ([fdo#109441]) +1 similar issue
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb8/igt@kms_psr@psr2_sprite_mmap_gtt.html

* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-kbl: [PASS][92] -> [DMESG-WARN][93] ([i915#180] / [i915#295])
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl1/igt@[email protected]
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl4/igt@[email protected]

* igt@kms_writeback@writeback-check-output:
- shard-apl: NOTRUN -> [SKIP][94] ([fdo#109271] / [i915#2437])
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl8/igt@[email protected]

* igt@nouveau_crc@pipe-d-source-outp-inactive:
- shard-tglb: NOTRUN -> [SKIP][95] ([i915#2530])
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][96] ([fdo#109278] / [i915#2530])
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb4/igt@[email protected]

* igt@prime_nv_pcopy@test1_macro:
- shard-tglb: NOTRUN -> [SKIP][97] ([fdo#109291])
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb5/igt@prime_nv_pcopy@test1_macro.html
- shard-iclb: NOTRUN -> [SKIP][98] ([fdo#109291])
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb3/igt@prime_nv_pcopy@test1_macro.html

* igt@prime_vgem@fence-flip-hang:
- shard-iclb: NOTRUN -> [SKIP][99] ([fdo#109295])
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb8/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][100] ([fdo#109295])
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb5/igt@[email protected]

* igt@sysfs_clients@fair-3:
- shard-kbl: NOTRUN -> [SKIP][101] ([fdo#109271] / [i915#2994]) +1 similar issue
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl4/igt@[email protected]

* igt@sysfs_clients@sema-10:
- shard-tglb: NOTRUN -> [SKIP][102] ([i915#2994])
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb2/igt@[email protected]
- shard-apl: NOTRUN -> [SKIP][103] ([fdo#109271] / [i915#2994]) +3 similar issues
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][104] ([i915#2994])
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb4/igt@[email protected]

* igt@sysfs_clients@sema-50:
- shard-glk: NOTRUN -> [SKIP][105] ([fdo#109271] / [i915#2994]) +2 similar issues
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk8/igt@[email protected]

#### Possible fixes ####

* igt@gem_ctx_persistence@many-contexts:
- shard-tglb: [FAIL][106] ([i915#2410]) -> [PASS][107]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-tglb6/igt@[email protected]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-tglb7/igt@[email protected]

* igt@gem_eio@unwedge-stress:
- shard-iclb: [TIMEOUT][108] ([i915#2369] / [i915#2481] / [i915#3070]) -> [PASS][109]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb3/igt@[email protected]
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb5/igt@[email protected]

* igt@gem_exec_fair@basic-deadline:
- shard-kbl: [FAIL][110] ([i915#2846]) -> [PASS][111]
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl3/igt@[email protected]
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl6/igt@[email protected]

* igt@gem_exec_fair@basic-none-vip@rcs0:
- shard-kbl: [FAIL][112] ([i915#2842]) -> [PASS][113] +1 similar issue
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl7/igt@gem_exec_fair@[email protected]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none@rcs0:
- shard-glk: [FAIL][114] ([i915#2842]) -> [PASS][115]
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-glk2/igt@gem_exec_fair@[email protected]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk8/igt@gem_exec_fair@[email protected]

* igt@gem_mmap_gtt@big-copy-xy:
- shard-glk: [FAIL][116] ([i915#307]) -> [PASS][117]
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-glk8/igt@[email protected]
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-glk5/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-medium-copy:
- shard-iclb: [FAIL][118] ([i915#307]) -> [PASS][119]
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb6/igt@[email protected]
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb1/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-suspend:
- shard-kbl: [DMESG-WARN][120] ([i915#180]) -> [PASS][121] +2 similar issues
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl7/igt@[email protected]
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl4/igt@[email protected]

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
- shard-apl: [DMESG-WARN][122] ([i915#180]) -> [PASS][123]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-apl6/igt@[email protected]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-apl1/igt@[email protected]

* igt@kms_psr@psr2_suspend:
- shard-iclb: [SKIP][124] ([fdo#109441]) -> [PASS][125] +2 similar issues
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb6/igt@kms_psr@psr2_suspend.html
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb2/igt@kms_psr@psr2_suspend.html

#### Warnings ####

* igt@i915_pm_dc@dc3co-vpb-simulation:
- shard-iclb: [SKIP][126] ([i915#658]) -> [SKIP][127] ([i915#588])
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb8/igt@[email protected]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb2/igt@[email protected]

* igt@i915_pm_rc6_residency@rc6-fence:
- shard-iclb: [WARN][128] ([i915#1804] / [i915#2684]) -> [WARN][129] ([i915#2684])
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb3/igt@[email protected]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb2/igt@[email protected]

* igt@i915_pm_rc6_residency@rc6-idle:
- shard-iclb: [WARN][130] ([i915#2684]) -> [WARN][131] ([i915#1804] / [i915#2684])
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb2/igt@[email protected]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb4/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-4:
- shard-iclb: [SKIP][132] ([i915#658]) -> [SKIP][133] ([i915#2920]) +1 similar issue
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb8/igt@[email protected]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb2/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-1:
- shard-iclb: [SKIP][134] ([i915#2920]) -> [SKIP][135] ([i915#658]) +1 similar issue
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-iclb2/igt@[email protected]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-iclb4/igt@[email protected]

* igt@runner@aborted:
- shard-kbl: ([FAIL][136], [FAIL][137], [FAIL][138], [FAIL][139], [FAIL][140], [FAIL][141], [FAIL][142]) ([i915#180] / [i915#1814] / [i915#2292] / [i915#2505] / [i915#3002] / [i915#3363]) -> ([FAIL][143], [FAIL][144], [FAIL][145], [FAIL][146], [FAIL][147], [FAIL][148], [FAIL][149], [FAIL][150], [FAIL][151], [FAIL][152], [FAIL][153]) ([i915#1436] / [i915#180] / [i915#1814] / [i915#2505] / [i915#3002] / [i915#3363] / [i915#602] / [i915#92])
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl7/igt@[email protected]
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl7/igt@[email protected]
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl6/igt@[email protected]
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl6/igt@[email protected]
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl2/igt@[email protected]
[141]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl2/igt@[email protected]
[142]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10253/shard-kbl3/igt@[email protected]
[143]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl7/igt@[email protected]
[144]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl7/igt@[email protected]
[145]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl6/igt@[email protected]
[146]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl6/igt@[email protected]
[147]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl6/igt@[email protected]
[148]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/shard-kbl7/ig

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5948/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#82 lore raw

[igt-dev] ✗ Fi.CI.BAT: failure for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev7)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev7)
URL : https://patchwork.freedesktop.org/series/90828/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_10285 -> IGTPW_5965
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_5965 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_5965, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5965/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_5965:

### IGT changes ###

#### Possible regressions ####

* igt@dmabuf@all@dma_fence:
- fi-hsw-4770: [PASS][1] -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10285/fi-hsw-4770/igt@dmabuf@all@dma_fence.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5965/fi-hsw-4770/igt@dmabuf@all@dma_fence.html

Known issues
------------

Here are the changes found in IGTPW_5965 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@amdgpu/amd_cs_nop@sync-fork-compute0:
- fi-kbl-soraka: NOTRUN -> [SKIP][3] ([fdo#109271]) +6 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5965/fi-kbl-soraka/igt@amdgpu/[email protected]

* igt@i915_pm_rpm@module-reload:
- fi-kbl-guc: [PASS][4] -> [FAIL][5] ([i915#2203] / [i915#579])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10285/fi-kbl-guc/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5965/fi-kbl-guc/igt@[email protected]

* igt@i915_selftest@live@execlists:
- fi-bsw-kefka: [PASS][6] -> [INCOMPLETE][7] ([i915#2782] / [i915#2940])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10285/fi-bsw-kefka/igt@i915_selftest@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5965/fi-bsw-kefka/igt@i915_selftest@[email protected]

* igt@runner@aborted:
- fi-bsw-kefka: NOTRUN -> [FAIL][8] ([fdo#109271] / [i915#1436])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5965/fi-bsw-kefka/igt@[email protected]

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
[i915#2203]: https://gitlab.freedesktop.org/drm/intel/issues/2203
[i915#2782]: https://gitlab.freedesktop.org/drm/intel/issues/2782
[i915#2940]: https://gitlab.freedesktop.org/drm/intel/issues/2940
[i915#579]: https://gitlab.freedesktop.org/drm/intel/issues/579

Participating hosts (40 -> 37)
------------------------------

Missing (3): fi-bsw-cyan fi-bdw-samus fi-hsw-4200u

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6121 -> IGTPW_5965

CI-20190529: 20190529
CI_DRM_10285: e65a658751fc5d3be5b0f4bcc4731e66ca1a537a @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5965: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5965/index.html
IGT_6121: a63ceb48e6c3e733d04156b32fba3b4f4d5ad794 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5965/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#83 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev8)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev8)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10304 -> IGTPW_5978
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/index.html

Known issues
------------

Here are the changes found in IGTPW_5978 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@i915_selftest@live@execlists:
- fi-bsw-kefka: [PASS][1] -> [INCOMPLETE][2] ([i915#2782] / [i915#2940])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/fi-bsw-kefka/igt@i915_selftest@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/fi-bsw-kefka/igt@i915_selftest@[email protected]

* igt@runner@aborted:
- fi-bsw-kefka: NOTRUN -> [FAIL][3] ([fdo#109271] / [i915#1436])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/fi-bsw-kefka/igt@[email protected]
- fi-bdw-5557u: NOTRUN -> [FAIL][4] ([i915#1602] / [i915#2029])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/fi-bdw-5557u/igt@[email protected]

#### Possible fixes ####

* igt@kms_chamelium@common-hpd-after-suspend:
- fi-kbl-7500u: [FAIL][5] ([i915#3449]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/fi-kbl-7500u/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/fi-kbl-7500u/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
[i915#1602]: https://gitlab.freedesktop.org/drm/intel/issues/1602
[i915#2029]: https://gitlab.freedesktop.org/drm/intel/issues/2029
[i915#2782]: https://gitlab.freedesktop.org/drm/intel/issues/2782
[i915#2940]: https://gitlab.freedesktop.org/drm/intel/issues/2940
[i915#3449]: https://gitlab.freedesktop.org/drm/intel/issues/3449
[i915#541]: https://gitlab.freedesktop.org/drm/intel/issues/541

Participating hosts (36 -> 35)
------------------------------

Missing (1): fi-bsw-cyan

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6128 -> IGTPW_5978

CI-20190529: 20190529
CI_DRM_10304: 3d3b5479895dd6dd133571ded4318adf595708ba @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5978: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/index.html
IGT_6128: b24e5949af7e51f0af484d2ce4cb4c5a41ac5358 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#84 lore raw

[igt-dev] ✗ Fi.CI.IGT: failure for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev8)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev8)
URL : https://patchwork.freedesktop.org/series/90828/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_10304_full -> IGTPW_5978_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_5978_full absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_5978_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_5978_full:

### IGT changes ###

#### Possible regressions ####

* igt@kms_plane_alpha_blend@pipe-d-coverage-vs-premult-vs-constant:
- shard-tglb: [PASS][1] -> [CRASH][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-tglb5/igt@kms_plane_alpha_blend@pipe-d-coverage-vs-premult-vs-constant.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb6/igt@kms_plane_alpha_blend@pipe-d-coverage-vs-premult-vs-constant.html

Known issues
------------

Here are the changes found in IGTPW_5978_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_create@create-clear:
- shard-glk: [PASS][3] -> [FAIL][4] ([i915#1888] / [i915#3160])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-glk5/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk5/igt@[email protected]

* igt@gem_ctx_persistence@engines-persistence:
- shard-snb: NOTRUN -> [SKIP][5] ([fdo#109271] / [i915#1099])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-snb7/igt@[email protected]

* igt@gem_eio@unwedge-stress:
- shard-iclb: [PASS][6] -> [TIMEOUT][7] ([i915#2369] / [i915#2481] / [i915#3070])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb7/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb1/igt@[email protected]

* igt@gem_exec_fair@basic-deadline:
- shard-kbl: NOTRUN -> [FAIL][8] ([i915#2846])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl1/igt@[email protected]
- shard-apl: NOTRUN -> [FAIL][9] ([i915#2846])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl1/igt@[email protected]

* igt@gem_exec_fair@basic-flow@rcs0:
- shard-tglb: [PASS][10] -> [FAIL][11] ([i915#2842]) +2 similar issues
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-tglb7/igt@gem_exec_fair@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none-rrul@rcs0:
- shard-glk: [PASS][12] -> [FAIL][13] ([i915#2842]) +1 similar issue
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-glk5/igt@gem_exec_fair@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk6/igt@gem_exec_fair@[email protected]
- shard-kbl: [PASS][14] -> [FAIL][15] ([i915#2842])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-kbl1/igt@gem_exec_fair@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none@vcs1:
- shard-iclb: NOTRUN -> [FAIL][16] ([i915#2842])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb2/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-glk: NOTRUN -> [FAIL][17] ([i915#2842])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk9/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs1:
- shard-kbl: [PASS][18] -> [SKIP][19] ([fdo#109271]) +1 similar issue
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-kbl2/igt@gem_exec_fair@[email protected]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl4/igt@gem_exec_fair@[email protected]

* igt@gem_exec_params@secure-non-master:
- shard-tglb: NOTRUN -> [SKIP][20] ([fdo#112283])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][21] ([fdo#112283])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb1/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-big-copy:
- shard-iclb: [PASS][22] -> [FAIL][23] ([i915#307])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb3/igt@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb7/igt@[email protected]

* igt@gem_render_copy@y-tiled-mc-ccs-to-vebox-yf-tiled:
- shard-iclb: NOTRUN -> [SKIP][24] ([i915#768])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb2/igt@[email protected]

* igt@gem_vm_create@destroy-race:
- shard-tglb: [PASS][25] -> [INCOMPLETE][26] ([i915#3325])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-tglb1/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb5/igt@[email protected]

* igt@gen3_render_linear_blits:
- shard-tglb: NOTRUN -> [SKIP][27] ([fdo#109289])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb6/igt@gen3_render_linear_blits.html
- shard-iclb: NOTRUN -> [SKIP][28] ([fdo#109289])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb5/igt@gen3_render_linear_blits.html

* igt@i915_pm_dc@dc6-psr:
- shard-iclb: [PASS][29] -> [DMESG-WARN][30] ([i915#3698])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb2/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb4/igt@[email protected]

* igt@i915_pm_rpm@modeset-non-lpsp-stress-no-wait:
- shard-tglb: NOTRUN -> [SKIP][31] ([fdo#111644] / [i915#1397] / [i915#2411])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][32] ([fdo#110892])
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb7/igt@[email protected]

* igt@kms_big_fb@x-tiled-16bpp-rotate-270:
- shard-iclb: NOTRUN -> [SKIP][33] ([fdo#110725] / [fdo#111614])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb3/igt@[email protected]

* igt@kms_big_fb@x-tiled-32bpp-rotate-180:
- shard-glk: [PASS][34] -> [DMESG-WARN][35] ([i915#118] / [i915#95])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-glk9/igt@[email protected]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk1/igt@[email protected]

* igt@kms_big_fb@yf-tiled-max-hw-stride-32bpp-rotate-0:
- shard-tglb: NOTRUN -> [SKIP][36] ([fdo#111615])
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb7/igt@[email protected]

* igt@kms_ccs@pipe-b-bad-rotation-90-yf_tiled_ccs:
- shard-tglb: NOTRUN -> [SKIP][37] ([i915#3689]) +2 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb7/igt@kms_ccs@pipe-b-bad-rotation-90-yf_tiled_ccs.html

* igt@kms_ccs@pipe-b-crc-sprite-planes-basic-y_tiled_gen12_rc_ccs_cc:
- shard-glk: NOTRUN -> [SKIP][38] ([fdo#109271]) +52 similar issues
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk6/igt@kms_ccs@pipe-b-crc-sprite-planes-basic-y_tiled_gen12_rc_ccs_cc.html

* igt@kms_chamelium@dp-crc-single:
- shard-snb: NOTRUN -> [SKIP][39] ([fdo#109271] / [fdo#111827]) +3 similar issues
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-snb5/igt@[email protected]

* igt@kms_chamelium@dp-mode-timings:
- shard-apl: NOTRUN -> [SKIP][40] ([fdo#109271] / [fdo#111827]) +32 similar issues
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl6/igt@[email protected]

* igt@kms_chamelium@hdmi-cmp-planar-formats:
- shard-iclb: NOTRUN -> [SKIP][41] ([fdo#109284] / [fdo#111827]) +3 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb2/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-0-75:
- shard-kbl: NOTRUN -> [SKIP][42] ([fdo#109271] / [fdo#111827]) +13 similar issues
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl3/igt@[email protected]

* igt@kms_color_chamelium@pipe-c-ctm-blue-to-red:
- shard-glk: NOTRUN -> [SKIP][43] ([fdo#109271] / [fdo#111827]) +6 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk2/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][44] ([fdo#109284] / [fdo#111827]) +3 similar issues
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb7/igt@[email protected]

* igt@kms_content_protection@lic:
- shard-apl: NOTRUN -> [TIMEOUT][45] ([i915#1319])
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl8/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-512x512-sliding:
- shard-tglb: NOTRUN -> [SKIP][46] ([fdo#109279] / [i915#3359])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb3/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-suspend:
- shard-kbl: [PASS][47] -> [DMESG-WARN][48] ([i915#180]) +7 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-kbl4/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl4/igt@[email protected]
- shard-apl: NOTRUN -> [DMESG-WARN][49] ([i915#180])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl6/igt@[email protected]

* igt@kms_cursor_legacy@pipe-d-torture-bo:
- shard-apl: NOTRUN -> [SKIP][50] ([fdo#109271] / [i915#533]) +3 similar issues
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl3/igt@[email protected]

* igt@kms_fbcon_fbt@fbc-suspend:
- shard-apl: [PASS][51] -> [INCOMPLETE][52] ([i915#180])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-apl3/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl6/igt@[email protected]

* igt@kms_flip@2x-blocking-wf_vblank:
- shard-iclb: NOTRUN -> [SKIP][53] ([fdo#109274]) +1 similar issue
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb2/igt@kms_flip@2x-blocking-wf_vblank.html

* igt@kms_flip@2x-plain-flip-ts-check:
- shard-tglb: NOTRUN -> [SKIP][54] ([fdo#111825]) +7 similar issues
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb6/igt@[email protected]

* igt@kms_flip@flip-vs-expired-vblank-interruptible@a-hdmi-a1:
- shard-glk: NOTRUN -> [FAIL][55] ([i915#79])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk7/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs:
- shard-apl: NOTRUN -> [SKIP][56] ([fdo#109271] / [i915#2672])
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl7/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs.html

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu:
- shard-kbl: [PASS][57] -> [FAIL][58] ([i915#2546] / [i915#49])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-kbl6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu.html
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl1/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu.html
- shard-apl: [PASS][59] -> [FAIL][60] ([i915#49])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-apl2/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu.html
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl3/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-cpu.html

* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-indfb-plflip-blt:
- shard-glk: [PASS][61] -> [FAIL][62] ([i915#2546] / [i915#49])
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-glk5/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-onoff:
- shard-iclb: NOTRUN -> [SKIP][63] ([fdo#109280]) +6 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-mmap-cpu:
- shard-iclb: [PASS][64] -> [FAIL][65] ([i915#2546] / [i915#49])
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb1/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-mmap-cpu.html
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb4/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-mmap-cpu.html

* igt@kms_plane_alpha_blend@pipe-a-alpha-opaque-fb:
- shard-apl: NOTRUN -> [FAIL][66] ([fdo#108145] / [i915#265]) +6 similar issues
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl6/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-constant-alpha-max:
- shard-kbl: NOTRUN -> [FAIL][67] ([fdo#108145] / [i915#265]) +1 similar issue
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl3/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-alpha-transparent-fb:
- shard-apl: NOTRUN -> [FAIL][68] ([i915#265])
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl7/igt@[email protected]

* igt@kms_plane_multiple@atomic-pipe-c-tiling-none:
- shard-glk: [PASS][69] -> [FAIL][70] ([i915#1779])
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-glk7/igt@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk9/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-1:
- shard-tglb: NOTRUN -> [SKIP][71] ([i915#2920]) +1 similar issue
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb2/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][72] ([fdo#109271] / [i915#658]) +1 similar issue
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][73] ([i915#658])
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb4/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-5:
- shard-apl: NOTRUN -> [SKIP][74] ([fdo#109271] / [i915#658]) +5 similar issues
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl3/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-5:
- shard-kbl: NOTRUN -> [SKIP][75] ([fdo#109271] / [i915#658]) +3 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][76] ([i915#2920])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb2/igt@[email protected]

* igt@kms_psr@psr2_cursor_mmap_cpu:
- shard-iclb: [PASS][77] -> [SKIP][78] ([fdo#109441]) +1 similar issue
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb2/igt@kms_psr@psr2_cursor_mmap_cpu.html
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb7/igt@kms_psr@psr2_cursor_mmap_cpu.html

* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> [FAIL][79] ([IGT#2])
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl7/igt@kms_sysfs_edid_timing.html
- shard-kbl: NOTRUN -> [FAIL][80] ([IGT#2])
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl3/igt@kms_sysfs_edid_timing.html

* igt@kms_universal_plane@disable-primary-vs-flip-pipe-d:
- shard-kbl: NOTRUN -> [SKIP][81] ([fdo#109271]) +143 similar issues
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl1/igt@[email protected]
- shard-snb: NOTRUN -> [SKIP][82] ([fdo#109271]) +39 similar issues
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-snb6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][83] ([fdo#109278]) +3 similar issues
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb4/igt@[email protected]

* igt@kms_vblank@pipe-d-ts-continuation-idle:
- shard-apl: NOTRUN -> [SKIP][84] ([fdo#109271]) +353 similar issues
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl8/igt@[email protected]

* igt@kms_writeback@writeback-check-output:
- shard-apl: NOTRUN -> [SKIP][85] ([fdo#109271] / [i915#2437]) +1 similar issue
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl7/igt@[email protected]

* igt@nouveau_crc@pipe-b-source-outp-inactive:
- shard-iclb: NOTRUN -> [SKIP][86] ([i915#2530])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb5/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][87] ([i915#2530]) +1 similar issue
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb5/igt@[email protected]

* igt@nouveau_crc@pipe-d-source-outp-complete:
- shard-iclb: NOTRUN -> [SKIP][88] ([fdo#109278] / [i915#2530])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb6/igt@[email protected]

* igt@prime_vgem@coherency-gtt:
- shard-tglb: NOTRUN -> [SKIP][89] ([fdo#111656])
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][90] ([fdo#109292])
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb1/igt@[email protected]

* igt@sysfs_clients@create:
- shard-glk: NOTRUN -> [SKIP][91] ([fdo#109271] / [i915#2994]) +1 similar issue
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk9/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][92] ([i915#2994])
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][93] ([i915#2994])
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb2/igt@[email protected]

* igt@sysfs_clients@fair-1:
- shard-apl: NOTRUN -> [SKIP][94] ([fdo#109271] / [i915#2994]) +4 similar issues
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl6/igt@[email protected]

* igt@sysfs_clients@sema-25:
- shard-kbl: NOTRUN -> [SKIP][95] ([fdo#109271] / [i915#2994]) +3 similar issues
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl7/igt@[email protected]

#### Possible fixes ####

* igt@gem_ctx_persistence@many-contexts:
- shard-tglb: [FAIL][96] ([i915#2410]) -> [PASS][97]
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-tglb6/igt@[email protected]
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-tglb5/igt@[email protected]

* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-apl: [SKIP][98] ([fdo#109271]) -> [PASS][99]
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-apl1/igt@gem_exec_fair@[email protected]
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none@vcs0:
- shard-kbl: [FAIL][100] ([i915#2842]) -> [PASS][101] +1 similar issue
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-kbl3/igt@gem_exec_fair@[email protected]
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-solo@rcs0:
- shard-glk: [FAIL][102] ([i915#2842]) -> [PASS][103] +3 similar issues
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-glk7/igt@gem_exec_fair@[email protected]
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk2/igt@gem_exec_fair@[email protected]

* igt@gem_mmap_gtt@cpuset-big-copy-xy:
- shard-iclb: [FAIL][104] ([i915#2428]) -> [PASS][105]
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb1/igt@[email protected]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb4/igt@[email protected]

* igt@kms_big_fb@linear-32bpp-rotate-0:
- shard-glk: [DMESG-WARN][106] ([i915#118] / [i915#95]) -> [PASS][107]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-glk1/igt@[email protected]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk3/igt@[email protected]

* igt@kms_flip@flip-vs-expired-vblank@c-dp1:
- shard-apl: [FAIL][108] ([i915#79]) -> [PASS][109]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-apl7/igt@kms_flip@[email protected]
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl2/igt@kms_flip@[email protected]

* igt@kms_flip@flip-vs-expired-vblank@c-hdmi-a1:
- shard-glk: [FAIL][110] ([i915#79]) -> [PASS][111]
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-glk7/igt@kms_flip@[email protected]
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-glk4/igt@kms_flip@[email protected]

* igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
- shard-kbl: [DMESG-WARN][112] ([i915#180]) -> [PASS][113] +2 similar issues
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-kbl4/igt@kms_flip@[email protected]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-kbl3/igt@kms_flip@[email protected]

* igt@kms_hdr@bpc-switch-suspend:
- shard-apl: [DMESG-WARN][114] ([i915#180]) -> [PASS][115] +2 similar issues
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-apl1/igt@[email protected]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-apl1/igt@[email protected]

* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-iclb: [SKIP][116] ([fdo#109441]) -> [PASS][117] +2 similar issues
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb7/igt@kms_psr@psr2_sprite_mmap_gtt.html
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html

#### Warnings ####

* igt@i915_pm_dc@dc9-dpms:
- shard-iclb: [FAIL][118] ([i915#3343]) -> [INCOMPLETE][119] ([i915#3698])
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb6/igt@[email protected]
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb3/igt@[email protected]

* igt@i915_pm_rc6_residency@rc6-fence:
- shard-iclb: [WARN][120] ([i915#1804] / [i915#2684]) -> [WARN][121] ([i915#2684])
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb6/igt@[email protected]
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb5/igt@[email protected]

* igt@kms_psr2_sf@plane-move-sf-dmg-area-3:
- shard-iclb: [SKIP][122] ([i915#2920]) -> [SKIP][123] ([i915#658]) +3 similar issues
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb2/igt@[email protected]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb7/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-1:
- shard-iclb: [SKIP][124] ([i915#658]) -> [SKIP][125] ([i915#2920])
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10304/shard-iclb3/igt@[email protected]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5978/shard-iclb2/igt@[email protected]

48 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#85 lore raw

[igt-dev] ✗ Fi.CI.BUILD: failure for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev9)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev9)
URL : https://patchwork.freedesktop.org/series/90828/
State : failure

== Summary ==

Applying: tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none Patch failed at 0001 tests/kms_plane_alpha_blend: Dont commit primary for 6bpc display in coverage-vs-premult-vs-none When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#86 lore raw

[igt-dev] ✗ GitLab.Pipeline: warning for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev10)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev10)
URL : https://patchwork.freedesktop.org/series/90828/
State : warning

== Summary ==

Pipeline status: FAILED.

see https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/pipelines/354277 for the overview.

test:ninja-test-armhf has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/11551156):

  [9089008.151372] Test exited with IGT_EXIT_ABORT, aborting.
  [9089009.762349] Test exited with IGT_EXIT_ABORT, aborting.
  -------

Full log written to /builds/gfx-ci/igt-ci-tags/build/meson-logs/testlog.txt
FAILED: meson-test
/usr/bin/meson test --no-rebuild --print-errorlogs
ninja: build stopped: subcommand failed.
section_end:1625586499:step_script
section_start:1625586499:upload_artifacts_on_failure
Uploading artifacts for failed job
Uploading artifacts...
build: found 1623 matching files and directories
Uploading artifacts as "archive" to coordinator... ok id=11551156 responseStatus=201 Created token=isexsqQ_ section_end:1625586513:upload_artifacts_on_failure section_start:1625586513:cleanup_file_variables
Cleaning up file based variables
section_end:1625586515:cleanup_file_variables
ERROR: Job failed: exit code 1

== Logs ==

For more details see: https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/pipelines/354277
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#87 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev10)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev10)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10306 -> IGTPW_5985
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/index.html

Known issues
------------

Here are the changes found in IGTPW_5985 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_suspend@basic-s0:
- fi-cfl-8109u: [PASS][1] -> [INCOMPLETE][2] ([i915#155])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/fi-cfl-8109u/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/fi-cfl-8109u/igt@[email protected]

[i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155

Participating hosts (41 -> 37)
------------------------------

Missing (4): fi-ctg-p8600 fi-ilk-m540 fi-bsw-cyan fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6129 -> IGTPW_5985

CI-20190529: 20190529
CI_DRM_10306: 134ea1b1bddc580a8a246b05299291c9a7b0c7f5 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5985: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/index.html
IGT_6129: 687589e76f787d26ee2b539e551a9be06bd41ce3 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#88 lore raw

[igt-dev] ✗ Fi.CI.IGT: failure for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev10)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev10)
URL : https://patchwork.freedesktop.org/series/90828/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_10306_full -> IGTPW_5985_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_5985_full absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_5985_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_5985_full:

### IGT changes ###

#### Possible regressions ####

* igt@kms_addfb_basic@invalid-smem-bo-on-discrete:
- shard-apl: NOTRUN -> [FAIL][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl8/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-coverage-vs-premult-vs-constant:
- shard-tglb: NOTRUN -> [SKIP][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb6/igt@kms_plane_alpha_blend@pipe-b-coverage-vs-premult-vs-constant.html

* igt@kms_plane_alpha_blend@pipe-c-coverage-vs-premult-vs-constant:
- shard-tglb: [PASS][3] -> [SKIP][4] +2 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-tglb3/igt@kms_plane_alpha_blend@pipe-c-coverage-vs-premult-vs-constant.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@kms_plane_alpha_blend@pipe-c-coverage-vs-premult-vs-constant.html

Known issues
------------

Here are the changes found in IGTPW_5985_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_ctx_persistence@smoketest:
- shard-snb: NOTRUN -> [SKIP][5] ([fdo#109271] / [i915#1099]) +1 similar issue
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-snb6/igt@[email protected]

* igt@gem_eio@unwedge-stress:
- shard-tglb: [PASS][6] -> [TIMEOUT][7] ([i915#2369] / [i915#3063] / [i915#3648])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-tglb7/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb1/igt@[email protected]

* igt@gem_exec_fair@basic-none-vip@rcs0:
- shard-glk: [PASS][8] -> [FAIL][9] ([i915#2842])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-glk4/igt@gem_exec_fair@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk3/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@rcs0:
- shard-kbl: [PASS][10] -> [FAIL][11] ([i915#2842])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-kbl3/igt@gem_exec_fair@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl1/igt@gem_exec_fair@[email protected]
- shard-tglb: [PASS][12] -> [FAIL][13] ([i915#2842])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-tglb3/igt@gem_exec_fair@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs1:
- shard-iclb: NOTRUN -> [FAIL][14] ([i915#2842])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb4/igt@gem_exec_fair@[email protected]

* igt@gem_exec_params@no-bsd:
- shard-tglb: NOTRUN -> [SKIP][15] ([fdo#109283])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][16] ([fdo#109283])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb3/igt@[email protected]

* igt@gem_exec_reloc@basic-wide-active@bcs0:
- shard-apl: NOTRUN -> [FAIL][17] ([i915#3633]) +3 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl6/igt@gem_exec_reloc@[email protected]

* igt@gem_exec_reloc@basic-wide-active@rcs0:
- shard-snb: NOTRUN -> [FAIL][18] ([i915#3633]) +2 similar issues
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-snb6/igt@gem_exec_reloc@[email protected]

* igt@gem_exec_reloc@basic-wide-active@vcs1:
- shard-iclb: NOTRUN -> [FAIL][19] ([i915#3633])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb2/igt@gem_exec_reloc@[email protected]

* igt@gem_exec_whisper@basic-contexts:
- shard-glk: [PASS][20] -> [DMESG-WARN][21] ([i915#118] / [i915#95]) +1 similar issue
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-glk6/igt@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk9/igt@[email protected]

* igt@gem_mmap_gtt@big-copy-odd:
- shard-glk: [PASS][22] -> [FAIL][23] ([i915#307]) +2 similar issues
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-glk8/igt@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk1/igt@[email protected]

* igt@gem_render_copy@y-tiled-to-vebox-linear:
- shard-iclb: NOTRUN -> [SKIP][24] ([i915#768]) +1 similar issue
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb7/igt@[email protected]

* igt@gem_softpin@evict-snoop-interruptible:
- shard-tglb: NOTRUN -> [SKIP][25] ([fdo#109312])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][26] ([fdo#109312])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb8/igt@[email protected]

* igt@gem_userptr_blits@access-control:
- shard-tglb: NOTRUN -> [SKIP][27] ([i915#3297])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][28] ([i915#3297])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb5/igt@[email protected]

* igt@gem_userptr_blits@vma-merge:
- shard-apl: NOTRUN -> [FAIL][29] ([i915#3318])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl8/igt@[email protected]
- shard-iclb: NOTRUN -> [FAIL][30] ([i915#3318])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb6/igt@[email protected]
- shard-glk: NOTRUN -> [FAIL][31] ([i915#3318])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk6/igt@[email protected]
- shard-kbl: NOTRUN -> [FAIL][32] ([i915#3318])
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl6/igt@[email protected]
- shard-tglb: NOTRUN -> [FAIL][33] ([i915#3318])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@[email protected]

* igt@gen9_exec_parse@batch-zero-length:
- shard-iclb: NOTRUN -> [SKIP][34] ([fdo#112306])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb5/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][35] ([fdo#112306])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb5/igt@[email protected]

* igt@gen9_exec_parse@bb-large:
- shard-tglb: NOTRUN -> [SKIP][36] ([i915#2527])
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb1/igt@[email protected]
- shard-apl: NOTRUN -> [FAIL][37] ([i915#3296])
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][38] ([i915#2527])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb7/igt@[email protected]

* igt@i915_pm_dc@dc5-psr:
- shard-iclb: [PASS][39] -> [DMESG-WARN][40] ([i915#3698])
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-iclb5/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb4/igt@[email protected]

* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
- shard-apl: NOTRUN -> [SKIP][41] ([fdo#109271] / [i915#1937])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl3/igt@i915_pm_lpsp@[email protected]

* igt@i915_pm_rc6_residency@media-rc6-accuracy:
- shard-tglb: NOTRUN -> [SKIP][42] ([fdo#109289] / [fdo#111719])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb6/igt@[email protected]

* igt@i915_pm_rpm@modeset-non-lpsp-stress-no-wait:
- shard-tglb: NOTRUN -> [SKIP][43] ([fdo#111644] / [i915#1397] / [i915#2411])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][44] ([fdo#110892])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb3/igt@[email protected]

* igt@i915_pm_sseu@full-enable:
- shard-tglb: NOTRUN -> [SKIP][45] ([fdo#109288])
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][46] ([fdo#109288])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb6/igt@[email protected]

* igt@i915_selftest@live@hangcheck:
- shard-snb: [PASS][47] -> [INCOMPLETE][48] ([i915#2782])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-snb7/igt@i915_selftest@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-snb7/igt@i915_selftest@[email protected]

* igt@kms_atomic_transition@plane-all-modeset-transition:
- shard-iclb: NOTRUN -> [SKIP][49] ([i915#1769])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb3/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][50] ([i915#1769])
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@[email protected]

* igt@kms_big_fb@linear-32bpp-rotate-180:
- shard-glk: NOTRUN -> [DMESG-WARN][51] ([i915#118] / [i915#95])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk1/igt@[email protected]

* igt@kms_big_fb@linear-8bpp-rotate-270:
- shard-tglb: NOTRUN -> [SKIP][52] ([fdo#111614]) +4 similar issues
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb3/igt@[email protected]

* igt@kms_big_fb@x-tiled-32bpp-rotate-270:
- shard-iclb: NOTRUN -> [SKIP][53] ([fdo#110725] / [fdo#111614]) +4 similar issues
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb7/igt@[email protected]

* igt@kms_big_fb@yf-tiled-32bpp-rotate-270:
- shard-tglb: NOTRUN -> [SKIP][54] ([fdo#111615]) +1 similar issue
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb6/igt@[email protected]

* igt@kms_big_joiner@invalid-modeset:
- shard-iclb: NOTRUN -> [SKIP][55] ([i915#2705])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb5/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][56] ([i915#2705])
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb6/igt@[email protected]

* igt@kms_ccs@pipe-a-random-ccs-data-y_tiled_ccs:
- shard-tglb: NOTRUN -> [SKIP][57] ([i915#3689]) +6 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@kms_ccs@pipe-a-random-ccs-data-y_tiled_ccs.html

* igt@kms_cdclk@mode-transition:
- shard-apl: NOTRUN -> [SKIP][58] ([fdo#109271]) +199 similar issues
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl8/igt@[email protected]

* igt@kms_chamelium@dp-mode-timings:
- shard-apl: NOTRUN -> [SKIP][59] ([fdo#109271] / [fdo#111827]) +19 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl6/igt@[email protected]

* igt@kms_chamelium@vga-edid-read:
- shard-iclb: NOTRUN -> [SKIP][60] ([fdo#109284] / [fdo#111827]) +7 similar issues
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb1/igt@[email protected]

* igt@kms_chamelium@vga-hpd-without-ddc:
- shard-kbl: NOTRUN -> [SKIP][61] ([fdo#109271] / [fdo#111827]) +12 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl1/igt@[email protected]

* igt@kms_color@pipe-d-degamma:
- shard-iclb: NOTRUN -> [SKIP][62] ([fdo#109278] / [i915#1149])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb4/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-blue-to-red:
- shard-snb: NOTRUN -> [SKIP][63] ([fdo#109271] / [fdo#111827]) +15 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-snb7/igt@[email protected]

* igt@kms_color_chamelium@pipe-d-ctm-0-25:
- shard-glk: NOTRUN -> [SKIP][64] ([fdo#109271] / [fdo#111827]) +9 similar issues
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk4/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][65] ([fdo#109284] / [fdo#111827]) +8 similar issues
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb6/igt@[email protected]

* igt@kms_content_protection@atomic-dpms:
- shard-kbl: NOTRUN -> [TIMEOUT][66] ([i915#1319])
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl7/igt@[email protected]

* igt@kms_content_protection@legacy:
- shard-apl: NOTRUN -> [TIMEOUT][67] ([i915#1319])
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl2/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-32x32-sliding:
- shard-tglb: NOTRUN -> [SKIP][68] ([i915#3319])
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb6/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-512x170-onscreen:
- shard-tglb: NOTRUN -> [SKIP][69] ([fdo#109279] / [i915#3359])
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][70] ([fdo#109278] / [fdo#109279])
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb2/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-max-size-rapid-movement:
- shard-tglb: NOTRUN -> [SKIP][71] ([i915#3359]) +1 similar issue
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-64x21-sliding:
- shard-iclb: NOTRUN -> [SKIP][72] ([fdo#109278]) +20 similar issues
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb3/igt@[email protected]

* igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic:
- shard-iclb: NOTRUN -> [SKIP][73] ([fdo#109274] / [fdo#109278])
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb3/igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic.html

* igt@kms_cursor_legacy@pipe-d-single-bo:
- shard-glk: NOTRUN -> [SKIP][74] ([fdo#109271] / [i915#533])
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk7/igt@[email protected]

* igt@kms_flip@2x-flip-vs-wf_vblank-interruptible:
- shard-iclb: NOTRUN -> [SKIP][75] ([fdo#109274]) +1 similar issue
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb5/igt@kms_flip@2x-flip-vs-wf_vblank-interruptible.html

* igt@kms_flip@flip-vs-suspend@a-dp1:
- shard-apl: [PASS][76] -> [DMESG-WARN][77] ([i915#180])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-apl7/igt@kms_flip@[email protected]
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl6/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile:
- shard-snb: NOTRUN -> [SKIP][78] ([fdo#109271]) +295 similar issues
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-snb6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-indfb-plflip-blt:
- shard-tglb: NOTRUN -> [SKIP][79] ([fdo#111825]) +14 similar issues
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb3/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-suspend:
- shard-kbl: [PASS][80] -> [DMESG-WARN][81] ([i915#180]) +4 similar issues
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-kbl6/igt@[email protected]
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl1/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-mmap-wc:
- shard-glk: NOTRUN -> [SKIP][82] ([fdo#109271]) +91 similar issues
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk4/igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-mmap-wc.html

* igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-cur-indfb-draw-render:
- shard-iclb: NOTRUN -> [SKIP][83] ([fdo#109280]) +9 similar issues
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb7/igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-cur-indfb-draw-render.html

* igt@kms_frontbuffer_tracking@psr-1p-offscren-pri-shrfb-draw-mmap-gtt:
- shard-kbl: NOTRUN -> [SKIP][84] ([fdo#109271]) +132 similar issues
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl1/igt@kms_frontbuffer_tracking@psr-1p-offscren-pri-shrfb-draw-mmap-gtt.html

* igt@kms_hdr@bpc-switch-suspend:
- shard-kbl: [PASS][85] -> [FAIL][86] ([i915#1188])
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-kbl4/igt@[email protected]
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl6/igt@[email protected]

* igt@kms_hdr@static-toggle-suspend:
- shard-tglb: NOTRUN -> [SKIP][87] ([i915#1187])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][88] ([i915#1187])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb1/igt@[email protected]

* igt@kms_pipe_b_c_ivb@pipe-b-double-modeset-then-modeset-pipe-c:
- shard-tglb: NOTRUN -> [SKIP][89] ([fdo#109289])
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][90] ([fdo#109289]) +1 similar issue
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb4/igt@[email protected]

* igt@kms_pipe_crc_basic@disable-crc-after-crtc-pipe-d:
- shard-apl: NOTRUN -> [SKIP][91] ([fdo#109271] / [i915#533]) +1 similar issue
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl3/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-coverage-vs-premult-vs-constant:
- shard-kbl: [PASS][92] -> [SKIP][93] ([fdo#109271]) +1 similar issue
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-kbl7/igt@kms_plane_alpha_blend@pipe-a-coverage-vs-premult-vs-constant.html
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl2/igt@kms_plane_alpha_blend@pipe-a-coverage-vs-premult-vs-constant.html
- shard-apl: [PASS][94] -> [SKIP][95] ([fdo#109271])
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-apl1/igt@kms_plane_alpha_blend@pipe-a-coverage-vs-premult-vs-constant.html
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl6/igt@kms_plane_alpha_blend@pipe-a-coverage-vs-premult-vs-constant.html
- shard-iclb: [PASS][96] -> [SKIP][97] ([fdo#109278])
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-iclb3/igt@kms_plane_alpha_blend@pipe-a-coverage-vs-premult-vs-constant.html
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb2/igt@kms_plane_alpha_blend@pipe-a-coverage-vs-premult-vs-constant.html

* igt@kms_plane_alpha_blend@pipe-b-alpha-opaque-fb:
- shard-glk: NOTRUN -> [FAIL][98] ([fdo#108145] / [i915#265])
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk5/igt@[email protected]
- shard-kbl: NOTRUN -> [FAIL][99] ([fdo#108145] / [i915#265])
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl7/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-alpha-basic:
- shard-apl: NOTRUN -> [FAIL][100] ([fdo#108145] / [i915#265]) +1 similar issue
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl3/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-coverage-vs-premult-vs-constant:
- shard-glk: [PASS][101] -> [SKIP][102] ([fdo#109271]) +1 similar issue
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-glk2/igt@kms_plane_alpha_blend@pipe-c-coverage-vs-premult-vs-constant.html
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk4/igt@kms_plane_alpha_blend@pipe-c-coverage-vs-premult-vs-constant.html

* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-3:
- shard-kbl: NOTRUN -> [SKIP][103] ([fdo#109271] / [i915#658]) +3 similar issues
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl6/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-1:
- shard-tglb: NOTRUN -> [SKIP][104] ([i915#2920])
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb3/igt@[email protected]
- shard-apl: NOTRUN -> [SKIP][105] ([fdo#109271] / [i915#658]) +4 similar issues
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl3/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][106] ([fdo#109271] / [i915#658]) +1 similar issue
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][107] ([i915#658])
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb1/igt@[email protected]

* igt@kms_psr2_su@page_flip:
- shard-tglb: NOTRUN -> [SKIP][108] ([i915#1911])
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@kms_psr2_su@page_flip.html

* igt@kms_psr@psr2_dpms:
- shard-tglb: NOTRUN -> [FAIL][109] ([i915#132] / [i915#3467]) +1 similar issue
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@kms_psr@psr2_dpms.html

* igt@kms_psr@psr2_no_drrs:
- shard-iclb: [PASS][110] -> [SKIP][111] ([fdo#109441]) +3 similar issues
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-iclb2/igt@kms_psr@psr2_no_drrs.html
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb4/igt@kms_psr@psr2_no_drrs.html

* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: NOTRUN -> [SKIP][112] ([fdo#109441])
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb6/igt@kms_psr@psr2_sprite_plane_move.html

* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> [FAIL][113] ([IGT#2])
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl2/igt@kms_sysfs_edid_timing.html

* igt@kms_vblank@pipe-d-wait-idle:
- shard-kbl: NOTRUN -> [SKIP][114] ([fdo#109271] / [i915#533]) +2 similar issues
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl7/igt@[email protected]

* igt@kms_writeback@writeback-check-output:
- shard-apl: NOTRUN -> [SKIP][115] ([fdo#109271] / [i915#2437])
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl6/igt@[email protected]

* igt@kms_writeback@writeback-fb-id:
- shard-glk: NOTRUN -> [SKIP][116] ([fdo#109271] / [i915#2437])
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk2/igt@[email protected]

* igt@perf@polling-parameterized:
- shard-glk: [PASS][117] -> [FAIL][118] ([i915#1542])
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-glk6/igt@[email protected]
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk3/igt@[email protected]

* igt@prime_nv_api@i915_nv_import_twice:
- shard-iclb: NOTRUN -> [SKIP][119] ([fdo#109291])
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb7/igt@prime_nv_api@i915_nv_import_twice.html
- shard-tglb: NOTRUN -> [SKIP][120] ([fdo#109291])
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb1/igt@prime_nv_api@i915_nv_import_twice.html

* igt@sysfs_clients@busy:
- shard-tglb: NOTRUN -> [SKIP][121] ([i915#2994]) +1 similar issue
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][122] ([fdo#109271] / [i915#2994]) +1 similar issue
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk6/igt@[email protected]
- shard-kbl: NOTRUN -> [SKIP][123] ([fdo#109271] / [i915#2994])
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl2/igt@[email protected]

* igt@sysfs_clients@fair-7:
- shard-apl: NOTRUN -> [SKIP][124] ([fdo#109271] / [i915#2994]) +3 similar issues
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-apl2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][125] ([i915#2994]) +1 similar issue
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb4/igt@[email protected]

#### Possible fixes ####

* igt@gem_exec_fair@basic-deadline:
- shard-glk: [FAIL][126] ([i915#2846]) -> [PASS][127]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-glk4/igt@[email protected]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk2/igt@[email protected]

* igt@gem_exec_fair@basic-flow@rcs0:
- shard-tglb: [FAIL][128] ([i915#2842]) -> [PASS][129]
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-tglb1/igt@gem_exec_fair@[email protected]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vecs0:
- shard-kbl: [SKIP][130] ([fdo#109271]) -> [PASS][131] +1 similar issue
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-kbl3/igt@gem_exec_fair@[email protected]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-kbl1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-iclb: [FAIL][132] ([i915#2849]) -> [PASS][133]
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-iclb3/igt@gem_exec_fair@[email protected]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_reloc@basic-parallel:
- shard-tglb: [TIMEOUT][134] ([i915#3737]) -> [PASS][135]
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-tglb7/igt@[email protected]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-tglb5/igt@[email protected]

* igt@gem_exec_whisper@basic-queues:
- shard-glk: [DMESG-WARN][136] ([i915#118] / [i915#95]) -> [PASS][137]
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-glk3/igt@[email protected]
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-glk9/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-big-copy-odd:
- shard-iclb: [FAIL][138] ([i915#2428]) -> [PASS][139]
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-iclb6/igt@[email protected]
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/shard-iclb4/igt@[email protected]

* igt@i915_pm_dc@dc9-dpms:
- shard-apl: [SKIP][140] ([fdo#109271]) -> [PASS][141]
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10306/shard-ap

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5985/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#89 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev11)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev11)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10309 -> IGTPW_5991
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/index.html

Known issues
------------

Here are the changes found in IGTPW_5991 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_huc_copy@huc-copy:
- fi-cfl-8109u: NOTRUN -> [SKIP][1] ([fdo#109271] / [i915#2190])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/fi-cfl-8109u/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-fast:
- fi-cfl-8109u: NOTRUN -> [SKIP][2] ([fdo#109271] / [fdo#111827]) +8 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/fi-cfl-8109u/igt@[email protected]

* igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d:
- fi-cfl-8109u: NOTRUN -> [SKIP][3] ([fdo#109271] / [i915#533])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/fi-cfl-8109u/igt@[email protected]

* igt@kms_psr@primary_mmap_gtt:
- fi-cfl-8109u: NOTRUN -> [SKIP][4] ([fdo#109271]) +6 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/fi-cfl-8109u/igt@kms_psr@primary_mmap_gtt.html

* igt@runner@aborted:
- fi-cfl-8109u: NOTRUN -> [FAIL][5] ([i915#2722] / [i915#3363])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/fi-cfl-8109u/igt@[email protected]

* igt@vgem_basic@unload:
- fi-cfl-8109u: NOTRUN -> [INCOMPLETE][6] ([i915#3744])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/fi-cfl-8109u/igt@[email protected]

#### Possible fixes ####

* igt@gem_exec_suspend@basic-s0:
- fi-cfl-8109u: [INCOMPLETE][7] ([i915#155]) -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/fi-cfl-8109u/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/fi-cfl-8109u/igt@[email protected]

* igt@kms_chamelium@dp-crc-fast:
- fi-kbl-7500u: [FAIL][9] ([i915#1372]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/fi-kbl-7500u/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/fi-kbl-7500u/igt@[email protected]

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1372]: https://gitlab.freedesktop.org/drm/intel/issues/1372
[i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2722]: https://gitlab.freedesktop.org/drm/intel/issues/2722
[i915#3363]: https://gitlab.freedesktop.org/drm/intel/issues/3363
[i915#3744]: https://gitlab.freedesktop.org/drm/intel/issues/3744
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533

Participating hosts (44 -> 40)
------------------------------

Missing (4): fi-ctg-p8600 fi-ilk-m540 fi-bsw-cyan fi-hsw-4200u

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6130 -> IGTPW_5991

CI-20190529: 20190529
CI_DRM_10309: 6a5db0d08c45a29cebcfd39b53a15be664b9369c @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5991: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/index.html
IGT_6130: 390edfb703c346f06b0850db71bd3cc1342a3c02 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#90 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev11)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev11)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10309_full -> IGTPW_5991_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/index.html

Known issues
------------

Here are the changes found in IGTPW_5991_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@feature_discovery@display-3x:
- shard-iclb: NOTRUN -> [SKIP][1] ([i915#1839])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb4/igt@[email protected]

* igt@gem_ctx_persistence@legacy-engines-mixed:
- shard-snb: NOTRUN -> [SKIP][2] ([fdo#109271] / [i915#1099]) +4 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-snb5/igt@[email protected]

* igt@gem_eio@in-flight-suspend:
- shard-apl: NOTRUN -> [DMESG-WARN][3] ([i915#180])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl1/igt@[email protected]

* igt@gem_eio@kms:
- shard-glk: [PASS][4] -> [FAIL][5] ([i915#3115])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-glk1/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk4/igt@[email protected]

* igt@gem_exec_fair@basic-none-solo@rcs0:
- shard-kbl: NOTRUN -> [FAIL][6] ([i915#2842])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl2/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none@vcs1:
- shard-iclb: NOTRUN -> [FAIL][7] ([i915#2842])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs1:
- shard-kbl: [PASS][8] -> [FAIL][9] ([i915#2842]) +1 similar issue
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-kbl6/igt@gem_exec_fair@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_params@no-blt:
- shard-iclb: NOTRUN -> [SKIP][10] ([fdo#109283])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb8/igt@[email protected]

* igt@gem_exec_reloc@basic-wide-active@rcs0:
- shard-snb: NOTRUN -> [FAIL][11] ([i915#3633]) +2 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-snb6/igt@gem_exec_reloc@[email protected]

* igt@gem_huc_copy@huc-copy:
- shard-apl: NOTRUN -> [SKIP][12] ([fdo#109271] / [i915#2190])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl7/igt@[email protected]

* igt@gem_ppgtt@flink-and-close-vma-leak:
- shard-glk: [PASS][13] -> [FAIL][14] ([i915#644])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-glk8/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk8/igt@[email protected]

* igt@gem_pwrite@basic-exhaustion:
- shard-snb: NOTRUN -> [WARN][15] ([i915#2658])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-snb5/igt@[email protected]

* igt@gem_render_copy@x-tiled-to-vebox-yf-tiled:
- shard-kbl: NOTRUN -> [SKIP][16] ([fdo#109271]) +139 similar issues
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl2/igt@[email protected]

* igt@gem_render_copy@y-tiled-mc-ccs-to-vebox-y-tiled:
- shard-iclb: NOTRUN -> [SKIP][17] ([i915#768]) +1 similar issue
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb8/igt@[email protected]

* igt@gem_userptr_blits@unsync-unmap-cycles:
- shard-iclb: NOTRUN -> [SKIP][18] ([i915#3297])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb5/igt@[email protected]

* igt@gen7_exec_parse@chained-batch:
- shard-iclb: NOTRUN -> [SKIP][19] ([fdo#109289]) +2 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb6/igt@[email protected]

* igt@gen9_exec_parse@allowed-single:
- shard-iclb: NOTRUN -> [SKIP][20] ([fdo#112306])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb1/igt@[email protected]

* igt@i915_pm_dc@dc6-psr:
- shard-iclb: [PASS][21] -> [DMESG-WARN][22] ([i915#3698])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-iclb2/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb2/igt@[email protected]

* igt@i915_pm_dc@dc9-dpms:
- shard-iclb: NOTRUN -> [FAIL][23] ([i915#3343])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb5/igt@[email protected]

* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-hdmi-a:
- shard-glk: NOTRUN -> [SKIP][24] ([fdo#109271] / [i915#1937])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk1/igt@i915_pm_lpsp@[email protected]

* igt@i915_pm_rc6_residency@rc6-idle:
- shard-iclb: NOTRUN -> [WARN][25] ([i915#2684])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb5/igt@[email protected]

* igt@i915_selftest@live@hangcheck:
- shard-snb: [PASS][26] -> [INCOMPLETE][27] ([i915#2782])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-snb7/igt@i915_selftest@[email protected]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-snb7/igt@i915_selftest@[email protected]

* igt@kms_addfb_basic@invalid-smem-bo-on-discrete:
- shard-apl: NOTRUN -> [FAIL][28] ([i915#3745])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl1/igt@[email protected]

* igt@kms_big_fb@linear-32bpp-rotate-90:
- shard-iclb: NOTRUN -> [SKIP][29] ([fdo#110725] / [fdo#111614]) +1 similar issue
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb2/igt@[email protected]

* igt@kms_big_fb@yf-tiled-8bpp-rotate-0:
- shard-iclb: NOTRUN -> [SKIP][30] ([fdo#110723])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb5/igt@[email protected]

* igt@kms_big_joiner@basic:
- shard-iclb: NOTRUN -> [SKIP][31] ([i915#2705])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb5/igt@[email protected]

* igt@kms_ccs@pipe-d-bad-rotation-90-y_tiled_ccs:
- shard-tglb: NOTRUN -> [SKIP][32] ([i915#3689]) +1 similar issue
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb5/igt@kms_ccs@pipe-d-bad-rotation-90-y_tiled_ccs.html

* igt@kms_cdclk@plane-scaling:
- shard-iclb: NOTRUN -> [SKIP][33] ([i915#3742])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb5/igt@[email protected]

* igt@kms_chamelium@hdmi-mode-timings:
- shard-snb: NOTRUN -> [SKIP][34] ([fdo#109271] / [fdo#111827]) +16 similar issues
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-snb7/igt@[email protected]

* igt@kms_color@pipe-d-degamma:
- shard-iclb: NOTRUN -> [SKIP][35] ([fdo#109278] / [i915#1149])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb7/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-blue-to-red:
- shard-kbl: NOTRUN -> [SKIP][36] ([fdo#109271] / [fdo#111827]) +13 similar issues
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl6/igt@[email protected]

* igt@kms_color_chamelium@pipe-c-ctm-0-25:
- shard-apl: NOTRUN -> [SKIP][37] ([fdo#109271] / [fdo#111827]) +21 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl2/igt@[email protected]

* igt@kms_color_chamelium@pipe-c-gamma:
- shard-iclb: NOTRUN -> [SKIP][38] ([fdo#109284] / [fdo#111827]) +5 similar issues
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb5/igt@[email protected]

* igt@kms_color_chamelium@pipe-d-ctm-max:
- shard-tglb: NOTRUN -> [SKIP][39] ([fdo#109284] / [fdo#111827]) +1 similar issue
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb3/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][40] ([fdo#109271] / [fdo#111827]) +2 similar issues
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][41] ([fdo#109278] / [fdo#109284] / [fdo#111827])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb8/igt@[email protected]

* igt@kms_content_protection@atomic:
- shard-kbl: NOTRUN -> [TIMEOUT][42] ([i915#1319])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl1/igt@[email protected]

* igt@kms_content_protection@content_type_change:
- shard-iclb: NOTRUN -> [SKIP][43] ([fdo#109300] / [fdo#111066])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb7/igt@kms_content_protection@content_type_change.html

* igt@kms_content_protection@dp-mst-lic-type-0:
- shard-iclb: NOTRUN -> [SKIP][44] ([i915#3116])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb4/igt@[email protected]

* igt@kms_content_protection@lic:
- shard-apl: NOTRUN -> [TIMEOUT][45] ([i915#1319]) +1 similar issue
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl1/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-512x512-offscreen:
- shard-iclb: NOTRUN -> [SKIP][46] ([fdo#109278] / [fdo#109279]) +2 similar issues
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb3/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-suspend:
- shard-kbl: [PASS][47] -> [DMESG-WARN][48] ([i915#180]) +6 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-kbl2/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl4/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-512x512-sliding:
- shard-tglb: NOTRUN -> [SKIP][49] ([fdo#109279] / [i915#3359])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb5/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-64x21-sliding:
- shard-iclb: NOTRUN -> [SKIP][50] ([fdo#109278]) +28 similar issues
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb2/igt@[email protected]

* igt@kms_cursor_legacy@cursorb-vs-flipb-toggle:
- shard-iclb: NOTRUN -> [SKIP][51] ([fdo#109274] / [fdo#109278]) +1 similar issue
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb2/igt@[email protected]

* igt@kms_cursor_legacy@pipe-d-single-bo:
- shard-apl: NOTRUN -> [SKIP][52] ([fdo#109271] / [i915#533])
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl6/igt@[email protected]

* igt@kms_fbcon_fbt@fbc-suspend:
- shard-apl: NOTRUN -> [INCOMPLETE][53] ([i915#180] / [i915#1982])
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl6/igt@[email protected]

* igt@kms_flip@2x-plain-flip-ts-check-interruptible:
- shard-tglb: NOTRUN -> [SKIP][54] ([fdo#111825]) +7 similar issues
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb2/igt@[email protected]

* igt@kms_flip@flip-vs-expired-vblank@a-hdmi-a2:
- shard-glk: [PASS][55] -> [FAIL][56] ([i915#79]) +1 similar issue
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-glk6/igt@kms_flip@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk8/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs:
- shard-apl: NOTRUN -> [SKIP][57] ([fdo#109271] / [i915#2672]) +1 similar issue
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl3/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs.html

* igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilercccs:
- shard-iclb: NOTRUN -> [SKIP][58] ([i915#2587])
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb4/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-indfb-scaledprimary:
- shard-kbl: [PASS][59] -> [FAIL][60] ([i915#2546] / [i915#49])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-kbl6/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl6/igt@[email protected]
- shard-apl: NOTRUN -> [FAIL][61] ([i915#49])
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl6/igt@[email protected]
- shard-glk: [PASS][62] -> [FAIL][63] ([i915#2546] / [i915#49])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-glk6/igt@[email protected]
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk6/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-2p-primscrn-pri-shrfb-draw-blt:
- shard-iclb: NOTRUN -> [SKIP][64] ([fdo#109280]) +23 similar issues
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb4/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-render:
- shard-glk: NOTRUN -> [SKIP][65] ([fdo#109271]) +34 similar issues
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk5/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-render.html

* igt@kms_hdr@static-toggle:
- shard-iclb: NOTRUN -> [SKIP][66] ([i915#1187]) +1 similar issue
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb4/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][67] ([i915#1187])
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb5/igt@[email protected]

* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-d-frame-sequence:
- shard-kbl: NOTRUN -> [SKIP][68] ([fdo#109271] / [i915#533]) +1 similar issue
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl7/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][69] ([fdo#109271] / [i915#533])
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk5/igt@[email protected]

* igt@kms_plane@plane-position-hole@pipe-a-planes:
- shard-iclb: [PASS][70] -> [FAIL][71] ([i915#2472])
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-iclb6/igt@kms_plane@[email protected]
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb1/igt@kms_plane@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-alpha-opaque-fb:
- shard-apl: NOTRUN -> [FAIL][72] ([fdo#108145] / [i915#265]) +4 similar issues
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl8/igt@[email protected]

* igt@kms_plane_lowres@pipe-c-tiling-x:
- shard-iclb: NOTRUN -> [SKIP][73] ([i915#3536])
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb5/igt@[email protected]

* igt@kms_plane_multiple@atomic-pipe-c-tiling-yf:
- shard-tglb: NOTRUN -> [SKIP][74] ([fdo#112054])
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb2/igt@[email protected]

* igt@kms_plane_scaling@2x-scaler-multi-pipe:
- shard-iclb: NOTRUN -> [SKIP][75] ([fdo#109274]) +6 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb3/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-4:
- shard-iclb: NOTRUN -> [SKIP][76] ([i915#2920])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb2/igt@[email protected]
- shard-kbl: NOTRUN -> [SKIP][77] ([fdo#109271] / [i915#658]) +1 similar issue
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl2/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][78] ([fdo#109271] / [i915#658])
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk4/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-5:
- shard-apl: NOTRUN -> [SKIP][79] ([fdo#109271] / [i915#658]) +4 similar issues
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl2/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-2:
- shard-iclb: NOTRUN -> [SKIP][80] ([i915#658]) +1 similar issue
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb6/igt@[email protected]

* igt@kms_psr@psr2_cursor_mmap_cpu:
- shard-iclb: [PASS][81] -> [SKIP][82] ([fdo#109441]) +1 similar issue
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-iclb2/igt@kms_psr@psr2_cursor_mmap_cpu.html
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb8/igt@kms_psr@psr2_cursor_mmap_cpu.html

* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: NOTRUN -> [SKIP][83] ([fdo#109441]) +2 similar issues
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb5/igt@kms_psr@psr2_sprite_plane_move.html

* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> [FAIL][84] ([IGT#2])
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl7/igt@kms_sysfs_edid_timing.html

* igt@kms_universal_plane@disable-primary-vs-flip-pipe-d:
- shard-snb: NOTRUN -> [SKIP][85] ([fdo#109271]) +336 similar issues
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-snb5/igt@[email protected]

* igt@kms_vrr@flipline:
- shard-iclb: NOTRUN -> [SKIP][86] ([fdo#109502])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb7/igt@[email protected]

* igt@kms_writeback@writeback-check-output:
- shard-apl: NOTRUN -> [SKIP][87] ([fdo#109271] / [i915#2437])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl7/igt@[email protected]
- shard-kbl: NOTRUN -> [SKIP][88] ([fdo#109271] / [i915#2437])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl1/igt@[email protected]

* igt@kms_writeback@writeback-fb-id:
- shard-iclb: NOTRUN -> [SKIP][89] ([i915#2437])
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb8/igt@[email protected]

* igt@nouveau_crc@pipe-a-ctx-flip-skip-current-frame:
- shard-tglb: NOTRUN -> [SKIP][90] ([i915#2530])
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb5/igt@[email protected]

* igt@nouveau_crc@pipe-b-ctx-flip-skip-current-frame:
- shard-apl: NOTRUN -> [SKIP][91] ([fdo#109271]) +294 similar issues
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl1/igt@[email protected]

* igt@nouveau_crc@pipe-c-source-outp-complete:
- shard-iclb: NOTRUN -> [SKIP][92] ([i915#2530]) +2 similar issues
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb2/igt@[email protected]

* igt@perf@buffer-fill:
- shard-glk: [PASS][93] -> [DMESG-WARN][94] ([i915#118] / [i915#95]) +2 similar issues
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-glk4/igt@[email protected]
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk6/igt@[email protected]

* igt@perf@per-context-mode-unprivileged:
- shard-tglb: NOTRUN -> [SKIP][95] ([fdo#109289])
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb2/igt@[email protected]

* igt@perf@polling-parameterized:
- shard-glk: [PASS][96] -> [FAIL][97] ([i915#1542])
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-glk5/igt@[email protected]
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk8/igt@[email protected]

* igt@prime_nv_pcopy@test3_5:
- shard-iclb: NOTRUN -> [SKIP][98] ([fdo#109291]) +1 similar issue
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb2/igt@prime_nv_pcopy@test3_5.html
- shard-tglb: NOTRUN -> [SKIP][99] ([fdo#109291])
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb5/igt@prime_nv_pcopy@test3_5.html

* igt@sysfs_clients@busy:
- shard-kbl: NOTRUN -> [SKIP][100] ([fdo#109271] / [i915#2994])
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl6/igt@[email protected]

* igt@sysfs_clients@fair-1:
- shard-apl: NOTRUN -> [SKIP][101] ([fdo#109271] / [i915#2994]) +2 similar issues
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl6/igt@[email protected]

* igt@sysfs_clients@pidname:
- shard-iclb: NOTRUN -> [SKIP][102] ([i915#2994])
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb8/igt@[email protected]

* igt@vgem_basic@unload:
- shard-kbl: NOTRUN -> [INCOMPLETE][103] ([i915#3744])
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl3/igt@[email protected]
- shard-apl: NOTRUN -> [INCOMPLETE][104] ([i915#3744])
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl2/igt@[email protected]

#### Possible fixes ####

* igt@core_hotunplug@unbind-rebind:
- shard-apl: [DMESG-WARN][105] ([i915#2283]) -> [PASS][106]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-apl1/igt@[email protected]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl7/igt@[email protected]
- shard-glk: [DMESG-WARN][107] ([i915#2283]) -> [PASS][108]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-glk3/igt@[email protected]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk6/igt@[email protected]
- shard-kbl: [DMESG-WARN][109] ([i915#2283]) -> [PASS][110]
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-kbl2/igt@[email protected]
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl4/igt@[email protected]
- shard-iclb: [DMESG-WARN][111] ([i915#1602] / [i915#2283]) -> [PASS][112]
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-iclb5/igt@[email protected]
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb1/igt@[email protected]

* igt@gem_ctx_isolation@preservation-s3@bcs0:
- shard-kbl: [DMESG-WARN][113] ([i915#180]) -> [PASS][114] +3 similar issues
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-kbl1/igt@gem_ctx_isolation@[email protected]
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl2/igt@gem_ctx_isolation@[email protected]
- shard-apl: [DMESG-WARN][115] ([i915#180]) -> [PASS][116] +1 similar issue
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-apl8/igt@gem_ctx_isolation@[email protected]
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-apl3/igt@gem_ctx_isolation@[email protected]

* igt@gem_eio@unwedge-stress:
- shard-tglb: [TIMEOUT][117] ([i915#2369] / [i915#3063] / [i915#3648]) -> [PASS][118]
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-tglb2/igt@[email protected]
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb6/igt@[email protected]

* igt@gem_exec_fair@basic-deadline:
- shard-glk: [FAIL][119] ([i915#2846]) -> [PASS][120]
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-glk2/igt@[email protected]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk1/igt@[email protected]

* igt@gem_exec_fair@basic-none-rrul@rcs0:
- shard-glk: [FAIL][121] ([i915#2842]) -> [PASS][122] +1 similar issue
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-glk1/igt@gem_exec_fair@[email protected]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk5/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs0:
- shard-kbl: [SKIP][123] ([fdo#109271]) -> [PASS][124]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-kbl6/igt@gem_exec_fair@[email protected]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs1:
- shard-tglb: [FAIL][125] ([i915#2842]) -> [PASS][126]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-tglb5/igt@gem_exec_fair@[email protected]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vecs0:
- shard-iclb: [FAIL][127] ([i915#2842]) -> [PASS][128]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-iclb6/igt@gem_exec_fair@[email protected]
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb7/igt@gem_exec_fair@[email protected]

* igt@i915_pm_dc@dc5-psr:
- shard-iclb: [DMESG-WARN][129] ([i915#3698]) -> [PASS][130]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-iclb5/igt@[email protected]
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb4/igt@[email protected]

* igt@kms_big_fb@linear-32bpp-rotate-180:
- shard-tglb: [DMESG-WARN][131] ([i915#402]) -> [PASS][132]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-tglb7/igt@[email protected]
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-tglb2/igt@[email protected]

* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible@ac-hdmi-a1-hdmi-a2:
- shard-glk: [FAIL][133] ([i915#79]) -> [PASS][134]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-glk9/igt@kms_flip@[email protected]
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-glk5/igt@kms_flip@[email protected]

* igt@kms_flip@flip-vs-expired-vblank@a-dp1:
- shard-kbl: [FAIL][135] ([i915#79]) -> [PASS][136]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-kbl6/igt@kms_flip@[email protected]
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-kbl2/igt@kms_flip@[email protected]

* igt@kms_psr2_su@frontbuffer:
- shard-iclb: [SKIP][137] ([fdo#109642] / [fdo#111068] / [i915#658]) -> [PASS][138] +1 similar issue
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-iclb1/igt@[email protected]
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb2/igt@[email protected]

#### Warnings ####

* igt@kms_psr2_sf@plane-move-sf-dmg-area-3:
- shard-iclb: [SKIP][139] ([i915#658]) -> [SKIP][140] ([i915#2920]) +1 similar issue
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-iclb4/igt@[email protected]
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb2/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-5:
- shard-iclb: [SKIP][141] ([i915#2920]) -> [SKIP][142] ([i915#658]) +1 similar issue
[141]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10309/shard-iclb2/igt@[email protected]
[142]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/shard-iclb4/igt@[email protected]

* igt@runner@aborted:
- shard-kbl: ([FAIL][143], [FAIL][144], [FAIL][145], [FAIL][146], [FAIL][147], [FAIL][148], [FAIL][149], [FAIL][150]) ([i915#1436] / [i915#180] / [i915#1814] / [i915#2283] / [i915#2505] / [i915#3002] / [i915#3363]) -> ([FAI

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5991/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#91 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev13)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev13)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10312 -> IGTPW_5993
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_5993:

### IGT changes ###

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@runner@aborted:
- {fi-tgl-1115g4}: [FAIL][1] ([i915#2722]) -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/fi-tgl-1115g4/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-tgl-1115g4/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_5993 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@core_hotunplug@unbind-rebind:
- fi-bdw-5557u: NOTRUN -> [WARN][3] ([i915#3718])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-bdw-5557u/igt@[email protected]

* igt@gem_exec_suspend@basic-s0:
- fi-cfl-8109u: [PASS][4] -> [INCOMPLETE][5] ([i915#155])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/fi-cfl-8109u/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-cfl-8109u/igt@[email protected]

* igt@gem_huc_copy@huc-copy:
- fi-kbl-soraka: NOTRUN -> [SKIP][6] ([fdo#109271] / [i915#2190])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-kbl-soraka/igt@[email protected]

* igt@gem_tiled_blits@basic:
- fi-kbl-soraka: NOTRUN -> [SKIP][7] ([fdo#109271]) +3 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-kbl-soraka/igt@[email protected]

* igt@kms_chamelium@common-hpd-after-suspend:
- fi-kbl-soraka: NOTRUN -> [SKIP][8] ([fdo#109271] / [fdo#111827]) +8 similar issues
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-kbl-soraka/igt@[email protected]

* igt@kms_chamelium@dp-crc-fast:
- fi-bdw-5557u: NOTRUN -> [SKIP][9] ([fdo#109271] / [fdo#111827]) +8 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-bdw-5557u/igt@[email protected]

* igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d:
- fi-kbl-soraka: NOTRUN -> [SKIP][10] ([fdo#109271] / [i915#533])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-kbl-soraka/igt@[email protected]

* igt@kms_psr@cursor_plane_move:
- fi-bdw-5557u: NOTRUN -> [SKIP][11] ([fdo#109271]) +9 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-bdw-5557u/igt@kms_psr@cursor_plane_move.html

* igt@runner@aborted:
- fi-kbl-soraka: NOTRUN -> [FAIL][12] ([i915#2722] / [i915#3363])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-kbl-soraka/igt@[email protected]

* igt@vgem_basic@unload:
- fi-kbl-soraka: NOTRUN -> [INCOMPLETE][13] ([i915#3744])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-kbl-soraka/igt@[email protected]
- fi-bdw-5557u: NOTRUN -> [INCOMPLETE][14] ([i915#3744])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-bdw-5557u/igt@[email protected]

#### Possible fixes ####

* igt@gem_exec_suspend@basic-s0:
- fi-kbl-soraka: [INCOMPLETE][15] ([i915#155]) -> [PASS][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/fi-kbl-soraka/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-kbl-soraka/igt@[email protected]

* igt@kms_chamelium@dp-crc-fast:
- fi-kbl-7500u: [FAIL][17] ([i915#1372]) -> [PASS][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/fi-kbl-7500u/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-kbl-7500u/igt@[email protected]

#### Warnings ####

* igt@runner@aborted:
- fi-bdw-5557u: [FAIL][19] ([i915#1602] / [i915#2029]) -> [FAIL][20] ([i915#2722])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/fi-bdw-5557u/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/fi-bdw-5557u/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1372]: https://gitlab.freedesktop.org/drm/intel/issues/1372
[i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155
[i915#1602]: https://gitlab.freedesktop.org/drm/intel/issues/1602
[i915#1887]: https://gitlab.freedesktop.org/drm/intel/issues/1887
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#2029]: https://gitlab.freedesktop.org/drm/intel/issues/2029
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2722]: https://gitlab.freedesktop.org/drm/intel/issues/2722
[i915#3363]: https://gitlab.freedesktop.org/drm/intel/issues/3363
[i915#3718]: https://gitlab.freedesktop.org/drm/intel/issues/3718
[i915#3744]: https://gitlab.freedesktop.org/drm/intel/issues/3744
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533

Participating hosts (41 -> 38)
------------------------------

Missing (3): fi-bsw-cyan fi-bdw-samus fi-bsw-n3050

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6130 -> IGTPW_5993

CI-20190529: 20190529
CI_DRM_10312: 3fc600de716e7addf36b2cd87416395e5dcf4575 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5993: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/index.html
IGT_6130: 390edfb703c346f06b0850db71bd3cc1342a3c02 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#92 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev13)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev13)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10312_full -> IGTPW_5993_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/index.html

Known issues
------------

Here are the changes found in IGTPW_5993_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@feature_discovery@display-3x:
- shard-iclb: NOTRUN -> [SKIP][1] ([i915#1839])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb2/igt@[email protected]

* igt@gem_create@create-massive:
- shard-snb: NOTRUN -> [DMESG-WARN][2] ([i915#3002])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-snb5/igt@[email protected]

* igt@gem_ctx_persistence@engines-mixed-process:
- shard-snb: NOTRUN -> [SKIP][3] ([fdo#109271] / [i915#1099]) +5 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-snb5/igt@[email protected]

* igt@gem_ctx_persistence@many-contexts:
- shard-tglb: [PASS][4] -> [FAIL][5] ([i915#2410])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-tglb6/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb1/igt@[email protected]

* igt@gem_eio@unwedge-stress:
- shard-tglb: [PASS][6] -> [TIMEOUT][7] ([i915#2369] / [i915#3063] / [i915#3648])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-tglb3/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb6/igt@[email protected]

* igt@gem_exec_fair@basic-flow@rcs0:
- shard-tglb: [PASS][8] -> [FAIL][9] ([i915#2842]) +1 similar issue
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-tglb7/igt@gem_exec_fair@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb5/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-none-solo@rcs0:
- shard-kbl: NOTRUN -> [FAIL][10] ([i915#2842])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl6/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-glk: [PASS][11] -> [FAIL][12] ([i915#2842]) +1 similar issue
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-glk7/igt@gem_exec_fair@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk9/igt@gem_exec_fair@[email protected]

* igt@gem_exec_params@no-blt:
- shard-iclb: NOTRUN -> [SKIP][13] ([fdo#109283])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb8/igt@[email protected]

* igt@gem_exec_reloc@basic-wide-active@bcs0:
- shard-apl: NOTRUN -> [FAIL][14] ([i915#3633]) +3 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl8/igt@gem_exec_reloc@[email protected]

* igt@gem_exec_reloc@basic-wide-active@vcs1:
- shard-iclb: NOTRUN -> [FAIL][15] ([i915#3633])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb4/igt@gem_exec_reloc@[email protected]

* igt@gem_huc_copy@huc-copy:
- shard-apl: NOTRUN -> [SKIP][16] ([fdo#109271] / [i915#2190])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl8/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-big-copy-xy:
- shard-iclb: [PASS][17] -> [FAIL][18] ([i915#307])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb2/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb4/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-medium-copy-odd:
- shard-glk: [PASS][19] -> [FAIL][20] ([i915#307])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-glk9/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk5/igt@[email protected]

* igt@gem_pread@exhaustion:
- shard-apl: NOTRUN -> [WARN][21] ([i915#2658])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl6/igt@[email protected]

* igt@gem_render_copy@linear-to-vebox-yf-tiled:
- shard-iclb: NOTRUN -> [SKIP][22] ([i915#768])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb4/igt@[email protected]

* igt@gem_userptr_blits@unsync-unmap-cycles:
- shard-iclb: NOTRUN -> [SKIP][23] ([i915#3297])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb7/igt@[email protected]

* igt@gen7_exec_parse@chained-batch:
- shard-iclb: NOTRUN -> [SKIP][24] ([fdo#109289]) +2 similar issues
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb5/igt@[email protected]

* igt@gen9_exec_parse@batch-invalid-length:
- shard-snb: NOTRUN -> [SKIP][25] ([fdo#109271]) +394 similar issues
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-snb2/igt@[email protected]

* igt@i915_pm_dc@dc9-dpms:
- shard-iclb: NOTRUN -> [FAIL][26] ([i915#3343])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb8/igt@[email protected]

* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
- shard-kbl: NOTRUN -> [SKIP][27] ([fdo#109271] / [i915#1937])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl6/igt@i915_pm_lpsp@[email protected]
- shard-apl: NOTRUN -> [SKIP][28] ([fdo#109271] / [i915#1937])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl1/igt@i915_pm_lpsp@[email protected]

* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-hdmi-a:
- shard-glk: NOTRUN -> [SKIP][29] ([fdo#109271] / [i915#1937])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk3/igt@i915_pm_lpsp@[email protected]

* igt@i915_pm_rc6_residency@rc6-idle:
- shard-iclb: NOTRUN -> [WARN][30] ([i915#2684])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb2/igt@[email protected]

* igt@i915_suspend@sysfs-reader:
- shard-apl: [PASS][31] -> [DMESG-WARN][32] ([i915#180])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-apl3/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl2/igt@[email protected]

* igt@kms_big_fb@linear-32bpp-rotate-180:
- shard-glk: [PASS][33] -> [DMESG-WARN][34] ([i915#118] / [i915#95])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-glk4/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk3/igt@[email protected]

* igt@kms_big_fb@x-tiled-16bpp-rotate-90:
- shard-iclb: NOTRUN -> [SKIP][35] ([fdo#110725] / [fdo#111614])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb2/igt@[email protected]

* igt@kms_big_fb@y-tiled-64bpp-rotate-180:
- shard-iclb: [PASS][36] -> [DMESG-WARN][37] ([i915#3621])
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb5/igt@[email protected]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb1/igt@[email protected]

* igt@kms_big_fb@yf-tiled-8bpp-rotate-0:
- shard-iclb: NOTRUN -> [SKIP][38] ([fdo#110723])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb5/igt@[email protected]

* igt@kms_big_joiner@basic:
- shard-iclb: NOTRUN -> [SKIP][39] ([i915#2705])
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb3/igt@[email protected]

* igt@kms_ccs@pipe-d-bad-rotation-90-y_tiled_ccs:
- shard-tglb: NOTRUN -> [SKIP][40] ([i915#3689]) +1 similar issue
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb5/igt@kms_ccs@pipe-d-bad-rotation-90-y_tiled_ccs.html

* igt@kms_cdclk@plane-scaling:
- shard-iclb: NOTRUN -> [SKIP][41] ([i915#3742])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb1/igt@[email protected]

* igt@kms_chamelium@vga-hpd:
- shard-apl: NOTRUN -> [SKIP][42] ([fdo#109271] / [fdo#111827]) +20 similar issues
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl7/igt@[email protected]

* igt@kms_color@pipe-d-degamma:
- shard-iclb: NOTRUN -> [SKIP][43] ([fdo#109278] / [i915#1149])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb3/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-0-25:
- shard-snb: NOTRUN -> [SKIP][44] ([fdo#109271] / [fdo#111827]) +14 similar issues
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-snb7/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-blue-to-red:
- shard-kbl: NOTRUN -> [SKIP][45] ([fdo#109271] / [fdo#111827]) +10 similar issues
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl1/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-red-to-blue:
- shard-iclb: NOTRUN -> [SKIP][46] ([fdo#109284] / [fdo#111827]) +3 similar issues
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb3/igt@[email protected]

* igt@kms_color_chamelium@pipe-d-ctm-max:
- shard-tglb: NOTRUN -> [SKIP][47] ([fdo#109284] / [fdo#111827]) +1 similar issue
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb5/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][48] ([fdo#109271] / [fdo#111827]) +2 similar issues
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][49] ([fdo#109278] / [fdo#109284] / [fdo#111827])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb1/igt@[email protected]

* igt@kms_content_protection@atomic:
- shard-kbl: NOTRUN -> [TIMEOUT][50] ([i915#1319])
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl3/igt@[email protected]

* igt@kms_content_protection@dp-mst-lic-type-0:
- shard-iclb: NOTRUN -> [SKIP][51] ([i915#3116])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb4/igt@[email protected]

* igt@kms_content_protection@lic:
- shard-apl: NOTRUN -> [TIMEOUT][52] ([i915#1319]) +2 similar issues
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl6/igt@[email protected]

* igt@kms_content_protection@uevent:
- shard-kbl: NOTRUN -> [FAIL][53] ([i915#2105])
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl2/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-512x512-offscreen:
- shard-iclb: NOTRUN -> [SKIP][54] ([fdo#109278] / [fdo#109279]) +1 similar issue
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb2/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-512x512-sliding:
- shard-tglb: NOTRUN -> [SKIP][55] ([fdo#109279] / [i915#3359])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb7/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-64x21-sliding:
- shard-iclb: NOTRUN -> [SKIP][56] ([fdo#109278]) +22 similar issues
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb7/igt@[email protected]

* igt@kms_cursor_legacy@cursorb-vs-flipb-toggle:
- shard-iclb: NOTRUN -> [SKIP][57] ([fdo#109274] / [fdo#109278])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb1/igt@[email protected]

* igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
- shard-apl: NOTRUN -> [DMESG-WARN][58] ([i915#180])
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl8/igt@kms_flip@[email protected]

* igt@kms_flip@flip-vs-suspend@a-dp1:
- shard-kbl: NOTRUN -> [DMESG-WARN][59] ([i915#180])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl2/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs:
- shard-apl: NOTRUN -> [SKIP][60] ([fdo#109271] / [i915#2672])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl6/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs.html

* igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilercccs:
- shard-iclb: NOTRUN -> [SKIP][61] ([i915#2587])
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb3/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-draw-render:
- shard-glk: [PASS][62] -> [FAIL][63] ([i915#2546] / [i915#49])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-glk4/igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-draw-render.html
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk3/igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-draw-render.html

* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-shrfb-pgflip-blt:
- shard-tglb: NOTRUN -> [SKIP][64] ([fdo#111825]) +8 similar issues
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb5/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-suspend:
- shard-kbl: [PASS][65] -> [DMESG-WARN][66] ([i915#180]) +4 similar issues
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl2/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl7/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-2p-primscrn-spr-indfb-draw-mmap-cpu:
- shard-iclb: NOTRUN -> [SKIP][67] ([fdo#109280]) +15 similar issues
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb8/igt@kms_frontbuffer_tracking@psr-2p-primscrn-spr-indfb-draw-mmap-cpu.html

* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-render:
- shard-glk: NOTRUN -> [SKIP][68] ([fdo#109271]) +35 similar issues
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk8/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-render.html

* igt@kms_frontbuffer_tracking@psr-rgb101010-draw-mmap-wc:
- shard-kbl: NOTRUN -> [SKIP][69] ([fdo#109271]) +120 similar issues
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl3/igt@[email protected]

* igt@kms_hdr@static-toggle:
- shard-iclb: NOTRUN -> [SKIP][70] ([i915#1187])
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb5/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][71] ([i915#1187])
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb5/igt@[email protected]

* igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d:
- shard-apl: NOTRUN -> [SKIP][72] ([fdo#109271] / [i915#533]) +1 similar issue
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl3/igt@[email protected]

* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-d-frame-sequence:
- shard-kbl: NOTRUN -> [SKIP][73] ([fdo#109271] / [i915#533]) +1 similar issue
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl2/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][74] ([fdo#109271] / [i915#533])
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk2/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-alpha-opaque-fb:
- shard-apl: NOTRUN -> [FAIL][75] ([fdo#108145] / [i915#265]) +1 similar issue
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl7/igt@[email protected]

* igt@kms_plane_lowres@pipe-c-tiling-x:
- shard-iclb: NOTRUN -> [SKIP][76] ([i915#3536])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb3/igt@[email protected]

* igt@kms_plane_multiple@atomic-pipe-c-tiling-yf:
- shard-tglb: NOTRUN -> [SKIP][77] ([fdo#112054])
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb5/igt@[email protected]

* igt@kms_plane_scaling@2x-scaler-multi-pipe:
- shard-iclb: NOTRUN -> [SKIP][78] ([fdo#109274]) +6 similar issues
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb3/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-4:
- shard-iclb: NOTRUN -> [SKIP][79] ([i915#658]) +1 similar issue
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb8/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][80] ([fdo#109271] / [i915#658])
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk6/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-5:
- shard-apl: NOTRUN -> [SKIP][81] ([fdo#109271] / [i915#658]) +4 similar issues
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl3/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-5:
- shard-kbl: NOTRUN -> [SKIP][82] ([fdo#109271] / [i915#658]) +1 similar issue
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl4/igt@[email protected]

* igt@kms_psr@psr2_primary_render:
- shard-iclb: [PASS][83] -> [SKIP][84] ([fdo#109441])
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb2/igt@kms_psr@psr2_primary_render.html
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb5/igt@kms_psr@psr2_primary_render.html

* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: NOTRUN -> [SKIP][85] ([fdo#109441]) +1 similar issue
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb5/igt@kms_psr@psr2_sprite_plane_move.html

* igt@kms_setmode@basic:
- shard-snb: NOTRUN -> [FAIL][86] ([i915#31])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-snb7/igt@[email protected]

* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> [FAIL][87] ([IGT#2])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl7/igt@kms_sysfs_edid_timing.html

* igt@kms_writeback@writeback-check-output:
- shard-apl: NOTRUN -> [SKIP][88] ([fdo#109271] / [i915#2437]) +2 similar issues
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl8/igt@[email protected]

* igt@kms_writeback@writeback-fb-id:
- shard-iclb: NOTRUN -> [SKIP][89] ([i915#2437])
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb4/igt@[email protected]

* igt@kms_writeback@writeback-pixel-formats:
- shard-kbl: NOTRUN -> [SKIP][90] ([fdo#109271] / [i915#2437])
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl7/igt@[email protected]

* igt@nouveau_crc@pipe-a-ctx-flip-skip-current-frame:
- shard-tglb: NOTRUN -> [SKIP][91] ([i915#2530])
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb3/igt@[email protected]

* igt@nouveau_crc@pipe-b-ctx-flip-skip-current-frame:
- shard-apl: NOTRUN -> [SKIP][92] ([fdo#109271]) +247 similar issues
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl6/igt@[email protected]

* igt@nouveau_crc@pipe-c-ctx-flip-skip-current-frame:
- shard-iclb: NOTRUN -> [SKIP][93] ([i915#2530]) +2 similar issues
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb8/igt@[email protected]

* igt@perf@per-context-mode-unprivileged:
- shard-tglb: NOTRUN -> [SKIP][94] ([fdo#109289])
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb7/igt@[email protected]

* igt@prime_nv_pcopy@test3_5:
- shard-iclb: NOTRUN -> [SKIP][95] ([fdo#109291]) +1 similar issue
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb4/igt@prime_nv_pcopy@test3_5.html
- shard-tglb: NOTRUN -> [SKIP][96] ([fdo#109291])
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb2/igt@prime_nv_pcopy@test3_5.html

* igt@sysfs_clients@fair-7:
- shard-apl: NOTRUN -> [SKIP][97] ([fdo#109271] / [i915#2994]) +3 similar issues
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl3/igt@[email protected]

* igt@sysfs_clients@sema-25:
- shard-kbl: NOTRUN -> [SKIP][98] ([fdo#109271] / [i915#2994]) +1 similar issue
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl4/igt@[email protected]

* igt@vgem_basic@unload:
- shard-kbl: NOTRUN -> [INCOMPLETE][99] ([i915#3744])
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl3/igt@[email protected]

#### Possible fixes ####

* igt@core_hotunplug@unbind-rebind:
- shard-apl: [DMESG-WARN][100] ([i915#1982] / [i915#2283]) -> [PASS][101]
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-apl2/igt@[email protected]
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-apl7/igt@[email protected]
- shard-glk: [DMESG-WARN][102] ([i915#2283]) -> [PASS][103]
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-glk7/igt@[email protected]
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk6/igt@[email protected]
- shard-kbl: [DMESG-WARN][104] ([i915#2283]) -> [PASS][105]
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl7/igt@[email protected]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl4/igt@[email protected]
- shard-iclb: [DMESG-WARN][106] ([i915#1602] / [i915#2283]) -> [PASS][107]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb8/igt@[email protected]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb7/igt@[email protected]

* igt@gem_eio@unwedge-stress:
- shard-iclb: [TIMEOUT][108] ([i915#2369] / [i915#2481] / [i915#3070]) -> [PASS][109]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb4/igt@[email protected]
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb6/igt@[email protected]

* igt@gem_exec_fair@basic-deadline:
- shard-glk: [FAIL][110] ([i915#2846]) -> [PASS][111]
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-glk3/igt@[email protected]
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk1/igt@[email protected]

* igt@gem_exec_fair@basic-none-rrul@rcs0:
- shard-glk: [FAIL][112] ([i915#2842]) -> [PASS][113] +2 similar issues
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-glk3/igt@gem_exec_fair@[email protected]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-glk7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-solo@rcs0:
- shard-iclb: [FAIL][114] ([i915#2842]) -> [PASS][115] +1 similar issue
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb8/igt@gem_exec_fair@[email protected]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb3/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs1:
- shard-kbl: [FAIL][116] ([i915#2842]) -> [PASS][117] +1 similar issue
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl2/igt@gem_exec_fair@[email protected]
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl7/igt@gem_exec_fair@[email protected]

* igt@i915_pm_dc@dc6-psr:
- shard-iclb: [FAIL][118] ([i915#454]) -> [PASS][119]
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb6/igt@[email protected]
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb6/igt@[email protected]

* igt@i915_selftest@live@hangcheck:
- shard-snb: [INCOMPLETE][120] ([i915#2782]) -> [PASS][121]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-snb6/igt@i915_selftest@[email protected]
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-snb7/igt@i915_selftest@[email protected]

* igt@kms_big_fb@linear-32bpp-rotate-180:
- shard-iclb: [DMESG-WARN][122] ([i915#1226]) -> [PASS][123]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb6/igt@[email protected]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb6/igt@[email protected]
- shard-tglb: [DMESG-WARN][124] ([i915#402]) -> [PASS][125]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-tglb7/igt@[email protected]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-tglb7/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-suspend:
- shard-kbl: [DMESG-WARN][126] ([i915#180]) -> [PASS][127] +3 similar issues
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl1/igt@[email protected]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-kbl6/igt@[email protected]

* igt@kms_psr@psr2_cursor_render:
- shard-iclb: [SKIP][128] ([fdo#109441]) -> [PASS][129]
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb7/igt@kms_psr@psr2_cursor_render.html
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb2/igt@kms_psr@psr2_cursor_render.html

#### Warnings ####

* igt@i915_pm_rc6_residency@rc6-fence:
- shard-iclb: [WARN][130] ([i915#1804] / [i915#2684]) -> [WARN][131] ([i915#2684])
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb6/igt@[email protected]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb1/igt@[email protected]

* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-1:
- shard-iclb: [SKIP][132] ([i915#2920]) -> [SKIP][133] ([i915#658]) +2 similar issues
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb2/igt@[email protected]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb8/igt@[email protected]

* igt@kms_psr2_sf@plane-move-sf-dmg-area-0:
- shard-iclb: [SKIP][134] ([i915#658]) -> [SKIP][135] ([i915#2920])
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-iclb6/igt@[email protected]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/shard-iclb2/igt@[email protected]

* igt@runner@aborted:
- shard-kbl: ([FAIL][136], [FAIL][137], [FAIL][138], [FAIL][139], [FAIL][140], [FAIL][141], [FAIL][142], [FAIL][143], [FAIL][144]) ([i915#1436] / [i915#180] / [i915#1814] / [i915#2283] / [i915#2505] / [i915#3002] / [i915#3363]) -> ([FAIL][145], [FAIL][146], [FAIL][147], [FAIL][148], [FAIL][149], [FAIL][150], [FAIL][151], [FAIL][152], [FAIL][153], [FAIL][154], [FAIL][155]) ([fdo#109271] / [i915#1436] / [i915#180] / [i915#1814] / [i915#2505] / [i915#2722] / [i915#3002] / [i915#3363] / [i915#602])
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl2/igt@[email protected]
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl7/igt@[email protected]
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl1/igt@[email protected]
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl6/igt@[email protected]
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl2/igt@[email protected]
[141]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl7/igt@[email protected]
[142]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl4/igt@[email protected]
[143]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl1/igt@[email protected]
[144]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10312/shard-kbl7/igt@[email protected]

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5993/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#93 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev16)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: tests/kms_plane_alpha_blend: Fix coverage-vs-premult-vs-constant tests (rev16)
URL : https://patchwork.freedesktop.org/series/90828/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10317 -> IGTPW_5997
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/index.html

Known issues
------------

Here are the changes found in IGTPW_5997 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_huc_copy@huc-copy:
- fi-skl-6700k2: NOTRUN -> [SKIP][1] ([fdo#109271] / [i915#2190])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-skl-6700k2/igt@[email protected]
- fi-cfl-8109u: NOTRUN -> [SKIP][2] ([fdo#109271] / [i915#2190])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-cfl-8109u/igt@[email protected]

* igt@kms_chamelium@dp-hpd-fast:
- fi-skl-6700k2: NOTRUN -> [SKIP][3] ([fdo#109271]) +11 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-skl-6700k2/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-fast:
- fi-cfl-8109u: NOTRUN -> [SKIP][4] ([fdo#109271] / [fdo#111827]) +8 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-cfl-8109u/igt@[email protected]

* igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d:
- fi-skl-6700k2: NOTRUN -> [SKIP][5] ([fdo#109271] / [i915#533])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-skl-6700k2/igt@[email protected]
- fi-cfl-8109u: NOTRUN -> [SKIP][6] ([fdo#109271] / [i915#533])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-cfl-8109u/igt@[email protected]

* igt@kms_psr@primary_mmap_gtt:
- fi-cfl-8109u: NOTRUN -> [SKIP][7] ([fdo#109271]) +6 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-cfl-8109u/igt@kms_psr@primary_mmap_gtt.html

* igt@runner@aborted:
- fi-cfl-8109u: NOTRUN -> [FAIL][8] ([i915#2722] / [i915#3363] / [i915#3744])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-cfl-8109u/igt@[email protected]
- fi-skl-6700k2: NOTRUN -> [FAIL][9] ([i915#2722] / [i915#3363] / [i915#3744])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-skl-6700k2/igt@[email protected]

* igt@vgem_basic@unload:
- fi-skl-6700k2: NOTRUN -> [INCOMPLETE][10] ([i915#3744])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-skl-6700k2/igt@[email protected]
- fi-cfl-8109u: NOTRUN -> [INCOMPLETE][11] ([i915#3744])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-cfl-8109u/igt@[email protected]

#### Possible fixes ####

* igt@gem_exec_suspend@basic-s0:
- fi-cfl-8109u: [INCOMPLETE][12] ([i915#155]) -> [PASS][13]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10317/fi-cfl-8109u/igt@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-cfl-8109u/igt@[email protected]

* igt@gem_exec_suspend@basic-s3:
- fi-skl-6700k2: [INCOMPLETE][14] ([i915#146] / [i915#198]) -> [PASS][15]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10317/fi-skl-6700k2/igt@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/fi-skl-6700k2/igt@[email protected]

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#146]: https://gitlab.freedesktop.org/drm/intel/issues/146
[i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155
[i915#198]: https://gitlab.freedesktop.org/drm/intel/issues/198
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2722]: https://gitlab.freedesktop.org/drm/intel/issues/2722
[i915#3363]: https://gitlab.freedesktop.org/drm/intel/issues/3363
[i915#3744]: https://gitlab.freedesktop.org/drm/intel/issues/3744
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533

Participating hosts (40 -> 39)
------------------------------

Missing (1): fi-bsw-cyan

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6131 -> IGTPW_5997

CI-20190529: 20190529
CI_DRM_10317: 505afbd2be5c7d6490a00a079a1d790921344b7a @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5997: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/index.html
IGT_6131: ed6bf12d6608af1bc25d1cfdfae09f54e5566284 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5997/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev