Add support for Kontron i.MX6UL/ULL and i.MX8MM modules/boards
Subsystems (7)
cover Add support for Kontron i.MX6UL/ULL and i.MX8MM modules/boards
From: Frieder Schrempf <[email protected]>
These SoMs and boards are developed and sold by Kontron Electronics GmbH. All basic peripherals for booting are supported.
Patches 1 to 4 are for preparation. Patch 5 adds support for the i.MX6UL/ULL boards and patch 6 for the i.MX8MM boards.
---
Resending with ML subscription for sender address. Sorry for the noise.
---
Frieder Schrempf (6):
mtd: spi-nor-ids: Add support for Macronix MX25V8035F and MX25R1635F
spi: fsl_qspi: Build driver only if DM_SPI is available
clk: imx8mm: Add SPI clocks
imx8m: Restrict usable memory to space below 4G boundary
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL
boards (N63xx/N64xx)
imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini
boards (N801x)arch/arm/dts/Makefile | 6 +- .../dts/imx6ul-kontron-n631x-s-u-boot.dtsi | 7 + arch/arm/dts/imx6ul-kontron-n631x-s.dts | 17 + arch/arm/dts/imx6ul-kontron-n631x-som.dtsi | 14 + .../dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi | 42 + arch/arm/dts/imx6ul-kontron-n6x1x-s.dts | 423 ++++ arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi | 420 ++++ .../dts/imx6ul-kontron-n6x1x-som-common.dtsi | 124 ++ .../dts/imx6ull-kontron-n641x-s-u-boot.dtsi | 7 + arch/arm/dts/imx6ull-kontron-n641x-s.dts | 16 + arch/arm/dts/imx6ull-kontron-n641x-som.dtsi | 13 + arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 116 ++ .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 237 +++ arch/arm/dts/imx8mm-kontron-n801x-s.dts | 387 ++++ arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 298 +++ arch/arm/mach-imx/imx8m/Kconfig | 8 + arch/arm/mach-imx/imx8m/soc.c | 14 + arch/arm/mach-imx/mx6/Kconfig | 9 + board/kontron/imx/mx6ul/Kconfig | 15 + board/kontron/imx/mx6ul/Makefile | 8 + board/kontron/imx/mx6ul/kontron_mx6ul.c | 85 + board/kontron/imx/mx6ul/spl.c | 376 ++++ board/kontron/imx/mx8mm/Kconfig | 15 + board/kontron/imx/mx8mm/Makefile | 9 + board/kontron/imx/mx8mm/imximage.cfg | 9 + board/kontron/imx/mx8mm/kontron_mx8mm.c | 102 + board/kontron/imx/mx8mm/lpddr4_timing.c | 1846 +++++++++++++++++ board/kontron/imx/mx8mm/spl.c | 330 +++ configs/kontron_mx6ul_defconfig | 106 + configs/kontron_mx8mm_defconfig | 124 ++ drivers/clk/imx/clk-imx8mm.c | 23 +- drivers/mtd/spi/spi-nor-ids.c | 2 + drivers/spi/Makefile | 2 +- include/configs/kontron_common.h | 86 + include/configs/kontron_mx6ul.h | 52 + include/configs/kontron_mx8mm.h | 66 + 36 files changed, 5411 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n631x-s.dts create mode 100644 arch/arm/dts/imx6ul-kontron-n631x-som.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-s.dts create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi create mode 100644 arch/arm/dts/imx6ull-kontron-n641x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ull-kontron-n641x-s.dts create mode 100644 arch/arm/dts/imx6ull-kontron-n641x-som.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-som.dtsi create mode 100644 board/kontron/imx/mx6ul/Kconfig create mode 100644 board/kontron/imx/mx6ul/Makefile create mode 100644 board/kontron/imx/mx6ul/kontron_mx6ul.c create mode 100644 board/kontron/imx/mx6ul/spl.c create mode 100644 board/kontron/imx/mx8mm/Kconfig create mode 100644 board/kontron/imx/mx8mm/Makefile create mode 100644 board/kontron/imx/mx8mm/imximage.cfg create mode 100644 board/kontron/imx/mx8mm/kontron_mx8mm.c create mode 100644 board/kontron/imx/mx8mm/lpddr4_timing.c create mode 100644 board/kontron/imx/mx8mm/spl.c create mode 100644 configs/kontron_mx6ul_defconfig create mode 100644 configs/kontron_mx8mm_defconfig create mode 100644 include/configs/kontron_common.h create mode 100644 include/configs/kontron_mx6ul.h create mode 100644 include/configs/kontron_mx8mm.h
Signature · 1 line
2.25.1
PATCH RESEND 1/6 mtd: spi-nor-ids: Add support for Macronix MX25V8035F and MX25R1635F
From: Frieder Schrempf <[email protected]>
The MX25V8035F is a 8Mb SPI NOR flash and the MX25R1635F is very similar, but has twice the size (16Mb) and supports a wider supply voltage range.
They were tested on the Kontron Electronics i.MX6UL and i.MX8MM SoMs.
--- drivers/mtd/spi/spi-nor-ids.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/mtd/spi/spi-nor-ids.c +2 -0
@@ -160,6 +160,8 @@ const struct flash_info spi_nor_ids[] = { { INFO("mx25l12855e", 0xc22618, 0, 64 * 1024, 256, 0) }, { INFO("mx25l25635e", 0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { INFO("mx25u25635f", 0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, + { INFO("mx25v8035f", 0xc22314, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { INFO("mx25r1635f", 0xc22815, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { INFO("mx25l25655e", 0xc22619, 0, 64 * 1024, 512, 0) }, { INFO("mx66l51235l", 0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { INFO("mx66u51235f", 0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
Signature · 1 line
2.25.1
PATCH RESEND 1/6 mtd: spi-nor-ids: Add support for Macronix MX25V8035F and MX25R1635F
Quoted 6 lines
From: Frieder Schrempf <[email protected]>
The MX25V8035F is a 8Mb SPI NOR flash and the MX25R1635F is very similar, but has twice the size (16Mb) and supports a wider supply voltage range.
They were tested on the Kontron Electronics i.MX6UL and i.MX8MM SoMs.Signed-off-by Frieder Schrempf <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH RESEND 1/6 mtd: spi-nor-ids: Add support for Macronix MX25V8035F and MX25R1635F
In reply to Frieder SchrempfQuoted 6 lines
From: Frieder Schrempf <[email protected]>
The MX25V8035F is a 8Mb SPI NOR flash and the MX25R1635F is very similar, but has twice the size (16Mb) and supports a wider supply voltage range.
They were tested on the Kontron Electronics i.MX6UL and i.MX8MM SoMs.Signed-off-by Frieder Schrempf <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH RESEND 2/6 spi: fsl_qspi: Build driver only if DM_SPI is available
In reply to Frieder SchrempfFrom: Frieder Schrempf <[email protected]>
The driver depends on DM_SPI and if it's not available (e. g. in SPL), then we should not try to build it as this will fail.
--- drivers/spi/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/Makefile +1 -1
@@ -11,6 +11,7 @@ obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o obj-$(CONFIG_SOFT_SPI) += soft_spi.o obj-$(CONFIG_SPI_MEM) += spi-mem.o obj-$(CONFIG_TI_QSPI) += ti_qspi.o +obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o else obj-y += spi.o obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o
@@ -30,7 +31,6 @@ obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o obj-$(CONFIG_FSL_ESPI) += fsl_espi.o -obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o obj-$(CONFIG_ICH_SPI) += ich.o obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o
Signature · 1 line
2.25.1
PATCH RESEND 2/6 spi: fsl_qspi: Build driver only if DM_SPI is available
Quoted 4 lines
From: Frieder Schrempf <[email protected]>
The driver depends onDM_SPIand if it's not available (e. g. in SPL), then we should not try to build it as this will fail.Signed-off-by Frieder Schrempf <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH RESEND 2/6 spi: fsl_qspi: Build driver only if DM_SPI is available
In reply to Frieder SchrempfQuoted 4 lines
From: Frieder Schrempf <[email protected]>
The driver depends onDM_SPIand if it's not available (e. g. in SPL), then we should not try to build it as this will fail.Signed-off-by Frieder Schrempf <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH RESEND 3/6 clk: imx8mm: Add SPI clocks
In reply to Frieder SchrempfFrom: Frieder Schrempf <[email protected]>
Add the clocks for the ECSPI controllers. This is ported from Linux v5.13-rc4.
--- drivers/clk/imx/clk-imx8mm.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)
drivers/clk/imx/clk-imx8mm.c +22 -1
@@ -131,6 +131,15 @@ static const char *imx8mm_usb_core_sels[] = {"clock-osc-24m", "sys_pll1_100m", "static const char *imx8mm_usb_phy_sels[] = {"clock-osc-24m" ,"sys_pll1_100m" ,"sys_pll1_40m" ,"sys_pll2_100m" ,"sys_pll2_200m" ,"clk_ext2" ,"clk_ext3" ,"audio_pll2_out" , }; +static const char *imx8mm_ecspi1_sels[] = {"clock-osc-24m" ,"sys_pll2_200m" ,"sys_pll1_40m" ,"sys_pll1_160m" , +"sys_pll1_800m" ,"sys_pll3_out" ,"sys_pll2_250m" ,"audio_pll2_out" , }; + +static const char *imx8mm_ecspi2_sels[] = {"clock-osc-24m" ,"sys_pll2_200m" ,"sys_pll1_40m" ,"sys_pll1_160m" , +"sys_pll1_800m" ,"sys_pll3_out" ,"sys_pll2_250m" ,"audio_pll2_out" , }; + +static const char *imx8mm_ecspi3_sels[] = {"clock-osc-24m" ,"sys_pll2_200m" ,"sys_pll1_40m" ,"sys_pll1_160m" , +"sys_pll1_800m" ,"sys_pll3_out" ,"sys_pll2_250m" ,"audio_pll2_out" , }; +static ulong imx8mm_clk_get_rate (struct clk *clk) {struct clk *c;
@@ -393,7 +402,19 @@ static int imx8mm_clk_probe(struct udevice *dev) imx8m_clk_composite("usb_core_ref", imx8mm_usb_core_sels, base + 0xb100));clk_dm (IMX8MM_CLK_USB_PHY_REF ,imx8m_clk_composite ("usb_phy_ref" , imx8mm_usb_phy_sels, base +0xb180 )); - +clk_dm (IMX8MM_CLK_ECSPI1 , +imx8m_clk_composite ("ecspi1" , imx8mm_ecspi1_sels, base +0xb280 )); +clk_dm (IMX8MM_CLK_ECSPI2 , +imx8m_clk_composite ("ecspi2" , imx8mm_ecspi2_sels, base +0xb300 )); +clk_dm (IMX8MM_CLK_ECSPI3 , +imx8m_clk_composite ("ecspi3" , imx8mm_ecspi3_sels, base +0xc180 )); + +clk_dm (IMX8MM_CLK_ECSPI1_ROOT , +imx_clk_gate4 ("ecspi1_root_clk" ,"ecspi1" , base +0x4070 ,0 )); +clk_dm (IMX8MM_CLK_ECSPI2_ROOT , +imx_clk_gate4 ("ecspi2_root_clk" ,"ecspi2" , base +0x4080 ,0 )); +clk_dm (IMX8MM_CLK_ECSPI3_ROOT , +imx_clk_gate4 ("ecspi3_root_clk" ,"ecspi3" , base +0x4090 ,0 ));clk_dm (IMX8MM_CLK_I2C1_ROOT ,imx_clk_gate4 ("i2c1_root_clk" ,"i2c1" , base +0x4170 ,0 )); clk_dm(IMX8MM_CLK_I2C2_ROOT,
Signature · 1 line
2.25.1
PATCH RESEND 3/6 clk: imx8mm: Add SPI clocks
Quoted 4 lines
From: Frieder Schrempf <[email protected]> Add the clocks for the ECSPI controllers. This is ported from Linux v5.13-rc4.
Signed-off-by Frieder Schrempf <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH RESEND 3/6 clk: imx8mm: Add SPI clocks
In reply to Frieder SchrempfQuoted 4 lines
From: Frieder Schrempf <[email protected]> Add the clocks for the ECSPI controllers. This is ported from Linux v5.13-rc4.
Signed-off-by Frieder Schrempf <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH RESEND 4/6 imx8m: Restrict usable memory to space below 4G boundary
In reply to Frieder SchrempfFrom: Frieder Schrempf <[email protected]>
Some IPs have their accessible address space restricted by the interconnect. Let's make sure U-Boot only ever uses the space below the 4G address boundary (which is 3GiB big), even when the effective available memory is bigger.
We implement board_get_usable_ram_top() for all i.MX8M SoCs, as the whole family is affected by this.
--- arch/arm/mach-imx/imx8m/soc.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm/mach-imx/imx8m/soc.c +14 -0
@@ -296,6 +296,20 @@ phys_size_t get_effective_memsize(void)#endif } +ulong board_get_usable_ram_top (ulong total_size) +{ +/* +* Some IPs have their accessible address space restricted by +* the interconnect. Let's make sure U-Boot only ever uses the +* space below the 4G address boundary (which is 3GiB big), +* even when the effective available memory is bigger. +*/ +if (PHYS_SDRAM + gd->ram_size >0x80000000 ) +return 0x80000000 ; + +return PHYS_SDRAM + gd->ram_size; +} +static u32 get_cpu_variant_type (u32 type) {struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR ;
Signature · 1 line
2.25.1
PATCH RESEND 4/6 imx8m: Restrict usable memory to space below 4G boundary
Quoted 8 lines
From: Frieder Schrempf <[email protected]>
Some IPs have their accessible address space restricted by the interconnect. Let's make sure U-Boot only ever uses the space below the 4G address boundary (which is 3GiB big), even when the effective available memory is bigger.
We implementboard_get_usable_ram_top()for all i.MX8M SoCs, as the whole family is affected by this.Signed-off-by Frieder Schrempf <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH RESEND 4/6 imx8m: Restrict usable memory to space below 4G boundary
In reply to Frieder SchrempfQuoted 8 lines
From: Frieder Schrempf <[email protected]>
Some IPs have their accessible address space restricted by the interconnect. Let's make sure U-Boot only ever uses the space below the 4G address boundary (which is 3GiB big), even when the effective available memory is bigger.
We implementboard_get_usable_ram_top()for all i.MX8M SoCs, as the whole family is affected by this.Signed-off-by Frieder Schrempf <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH RESEND 5/6 imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
In reply to Frieder SchrempfFrom: Frieder Schrempf <[email protected]>
This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH.
Currently there are the following SoM flavors (SoM-Line):
* N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND
* N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND
* N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND
And the according evaluation boards (Board-Line):
* N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ...
* N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ...
* N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ...
Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs.
--- arch/arm/dts/Makefile | 4 +- .../dts/imx6ul-kontron-n631x-s-u-boot.dtsi | 7 + arch/arm/dts/imx6ul-kontron-n631x-s.dts | 17 + arch/arm/dts/imx6ul-kontron-n631x-som.dtsi | 14 + .../dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi | 42 ++ arch/arm/dts/imx6ul-kontron-n6x1x-s.dts | 423 ++++++++++++++++++ arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi | 420 +++++++++++++++++ .../dts/imx6ul-kontron-n6x1x-som-common.dtsi | 124 +++++ .../dts/imx6ull-kontron-n641x-s-u-boot.dtsi | 7 + arch/arm/dts/imx6ull-kontron-n641x-s.dts | 16 + arch/arm/dts/imx6ull-kontron-n641x-som.dtsi | 13 + arch/arm/mach-imx/mx6/Kconfig | 9 + board/kontron/imx/mx6ul/Kconfig | 15 + board/kontron/imx/mx6ul/Makefile | 8 + board/kontron/imx/mx6ul/kontron_mx6ul.c | 85 ++++ board/kontron/imx/mx6ul/spl.c | 376 ++++++++++++++++ configs/kontron_mx6ul_defconfig | 106 +++++ include/configs/kontron_common.h | 86 ++++ include/configs/kontron_mx6ul.h | 52 +++ 19 files changed, 1823 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n631x-s.dts create mode 100644 arch/arm/dts/imx6ul-kontron-n631x-som.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-s.dts create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi create mode 100644 arch/arm/dts/imx6ull-kontron-n641x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ull-kontron-n641x-s.dts create mode 100644 arch/arm/dts/imx6ull-kontron-n641x-som.dtsi create mode 100644 board/kontron/imx/mx6ul/Kconfig create mode 100644 board/kontron/imx/mx6ul/Makefile create mode 100644 board/kontron/imx/mx6ul/kontron_mx6ul.c create mode 100644 board/kontron/imx/mx6ul/spl.c create mode 100644 configs/kontron_mx6ul_defconfig create mode 100644 include/configs/kontron_common.h create mode 100644 include/configs/kontron_mx6ul.h
arch/arm/dts/Makefile +3 -1
@@ -804,7 +804,9 @@ dtb-$(CONFIG_MX6UL) += \ imx6ul-liteboard.dtb \ imx6ul-phytec-segin-ff-rdk-nand.dtb \ imx6ul-pico-hobbit.dtb \ - imx6ul-pico-pi.dtb + imx6ul-pico-pi.dtb \ + imx6ul-kontron-n631x-s.dtb \ + imx6ull-kontron-n641x-s.dtb dtb-$(CONFIG_MX6ULL) += \ imx6ull-14x14-evk.dtb \
arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ul-kontron-n6x1x-s-u-boot.dtsi"
arch/arm/dts/imx6ul-kontron-n631x-s.dts new file +17 -0
@@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <[email protected]> + */ + +/dts-v1/; + +#include "imx6ul-kontron-n631x-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N631X S"; + compatible = "kontron,imx6ul-n631x-s", "kontron,imx6ul-n631x-som", + "fsl,imx6ul"; +};
arch/arm/dts/imx6ul-kontron-n631x-som.dtsi new file +14 -0
@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <[email protected]> + */ + +#include "imx6ul.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N631X SOM"; + compatible = "kontron,imx6ul-n631x-som", "fsl,imx6ul"; +};
arch/arm/dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi new file +42 -0
42 lines not on this page · raw message
arch/arm/dts/imx6ul-kontron-n6x1x-s.dts new file +423 -0
423 lines not on this page · raw message
arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi new file +420 -0
420 lines not on this page · raw message
arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi new file +124 -0
124 lines not on this page · raw message
arch/arm/dts/imx6ull-kontron-n641x-s-u-boot.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ul-kontron-n6x1x-s-u-boot.dtsi"
arch/arm/dts/imx6ull-kontron-n641x-s.dts new file +16 -0
@@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6ull-kontron-n641x-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N641X S"; + compatible = "kontron,imx6ull-n641x-s", "kontron,imx6ull-n641x-som", + "fsl,imx6ull"; +};
arch/arm/dts/imx6ull-kontron-n641x-som.dtsi new file +13 -0
@@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ull.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N641X SOM"; + compatible = "kontron,imx6ull-n641x-som", "fsl,imx6ull"; +};
arch/arm/mach-imx/mx6/Kconfig +9 -0
@@ -231,6 +231,14 @@ config TARGET_GW_VENTANA imply CMD_SATA imply CMD_SPL +config TARGET_KONTRON_MX6UL + bool "Kontron Electronics SL/BL i.MX6UL/ULL (N63xx/N64xx)" + depends on MX6UL + select DM + select DM_THERMAL + select SUPPORT_SPL + imply CMD_DM + config TARGET_KOSAGI_NOVENA bool "Kosagi Novena" select BOARD_LATE_INIT
@@ -648,6 +656,7 @@ source "board/grinn/liteboard/Kconfig" source "board/phytec/pcm058/Kconfig" source "board/phytec/pcl063/Kconfig" source "board/gateworks/gw_ventana/Kconfig" +source "board/kontron/imx/mx6ul/Kconfig" source "board/kosagi/novena/Kconfig" source "board/softing/vining_2000/Kconfig" source "board/liebherr/display5/Kconfig"
board/kontron/imx/mx6ul/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +if TARGET_KONTRON_MX6UL + +config SYS_BOARD + string + default "imx/mx6ul" + +config SYS_VENDOR + string + default "kontron" + +config SYS_CONFIG_NAME + string + default "kontron_mx6ul" + +endif
board/kontron/imx/mx6ul/Makefile new file +8 -0
@@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2018 Kontron Electronics GmbH + +ifdef CONFIG_SPL_BUILD +obj-y := spl.o +else +obj-y := kontron_mx6ul.o +endif
board/kontron/imx/mx6ul/kontron_mx6ul.c new file +85 -0
85 lines not on this page · raw message
board/kontron/imx/mx6ul/spl.c new file +376 -0
376 lines not on this page · raw message
configs/kontron_mx6ul_defconfig new file +106 -0
106 lines not on this page · raw message
include/configs/kontron_common.h new file +86 -0
86 lines not on this page · raw message
include/configs/kontron_mx6ul.h new file +52 -0
52 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [RESEND PATCH 5/6] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Hi Frieder,
Quoted 33 lines · Frieder Schrempf
From: Frieder Schrempf <[email protected]>
This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH.
Quoted 1 line
Currently there are the following SoM flavors (SoM-Line):
* N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND
* N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND
* N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NANDAnd the according evaluation boards (Board-Line):
* N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ...
* N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ...
* N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ...Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs.
Signed-off-by Frieder Schrempf <[email protected]>--- arch/arm/dts/Makefile | 4 +- .../dts/imx6ul-kontron-n631x-s-u-boot.dtsi | 7 + arch/arm/dts/imx6ul-kontron-n631x-s.dts | 17 + arch/arm/dts/imx6ul-kontron-n631x-som.dtsi | 14 + .../dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi | 42 ++ arch/arm/dts/imx6ul-kontron-n6x1x-s.dts | 423 ++++++++++++++++++ arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi | 420 +++++++++++++++++ .../dts/imx6ul-kontron-n6x1x-som-common.dtsi | 124 +++++ .../dts/imx6ull-kontron-n641x-s-u-boot.dtsi | 7 + arch/arm/dts/imx6ull-kontron-n641x-s.dts | 16 + arch/arm/dts/imx6ull-kontron-n641x-som.dtsi | 13 + arch/arm/mach-imx/mx6/Kconfig | 9 +
Quoted 8 lines
board/kontron/imx/mx6ul/Kconfig | 15 + board/kontron/imx/mx6ul/Makefile | 8 + board/kontron/imx/mx6ul/kontron_mx6ul.c | 85 ++++ board/kontron/imx/mx6ul/spl.c | 376 ++++++++++++++++ configs/kontron_mx6ul_defconfig | 106 +++++ include/configs/kontron_common.h | 86 ++++ include/configs/kontron_mx6ul.h | 52 +++ 19 files changed, 1823 insertions(+), 1 deletion(-)
The MAINTAINERS file is missing and this stops CI. Can you add it, please ?
Best regards,
Stefano
Quoted 1,974 lines
create mode 100644
arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsicreate mode 100644arch/arm/dts/imx6ul-kontron-n631x-s.dtscreate mode 100644arch/arm/dts/imx6ul-kontron-n631x-som.dtsicreate mode 100644arch/arm/dts/imx6ul-kontron-n6x1x-s-u-boot.dtsicreate mode 100644arch/arm/dts/imx6ul-kontron-n6x1x-s.dtscreate mode 100644arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsicreate mode 100644arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsicreate mode 100644arch/arm/dts/imx6ull-kontron-n641x-s-u-boot.dtsicreate mode 100644arch/arm/dts/imx6ull-kontron-n641x-s.dtscreate mode 100644arch/arm/dts/imx6ull-kontron-n641x-som.dtsicreate mode 100644 board/kontron/imx/mx6ul/Kconfig
create mode 100644 board/kontron/imx/mx6ul/Makefile create mode 100644board/kontron/imx/mx6ul/kontron_mx6ul.ccreate mode 100644board/kontron/imx/mx6ul/spl.c
create mode 100644 configs/kontron_mx6ul_defconfig
create mode 100644include/configs/kontron_common.hcreate mode 100644include/configs/kontron_mx6ul.harch/arm/dts/Makefile +3
-1@@ -804,7 +804,9 @@ dtb-$(CONFIG_MX6UL) += \ imx6ul-liteboard.dtb \ imx6ul-phytec-segin-ff-rdk-nand.dtb \ imx6ul-pico-hobbit.dtb \ - imx6ul-pico-pi.dtb + imx6ul-pico-pi.dtb \ + imx6ul-kontron-n631x-s.dtb \ + imx6ull-kontron-n641x-s.dtb dtb-$(CONFIG_MX6ULL) += \ imx6ull-14x14-evk.dtb \arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi new file +7
-0@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ul-kontron-n6x1x-s-u-boot.dtsi"arch/arm/dts/imx6ul-kontron-n631x-s.dts new file +17
-0@@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <[email protected]> + */ + +/dts-v1/; + +#include "imx6ul-kontron-n631x-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N631X S"; + compatible = "kontron,imx6ul-n631x-s", "kontron,imx6ul-n631x-som", + "fsl,imx6ul"; +};arch/arm/dts/imx6ul-kontron-n631x-som.dtsi new file +14
-0@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <[email protected]> + */ + +#include "imx6ul.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N631X SOM"; + compatible = "kontron,imx6ul-n631x-som", "fsl,imx6ul"; +};arch/arm/dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi new file +42
-0@@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +/* + * To make the PHYs work, we need to set the reset pin once. Afterwards + * in Linux we can't assign the shared reset GPIO to the PHYs, as this + * would cause Linux to reset both PHYs every time one of them gets + * reinitialized. + * + * Also we disable the second ethernet as it currently doesn't work with + * the devicetree setup in U-Boot. + */ + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&fec2 { + status = "disabled"; + /delete-property/ phy-handle; + /delete-node/ mdio; +};arch/arm/dts/imx6ul-kontron-n6x1x-s.dts new file +423
-0@@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <[email protected]> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6ul-kontron-n6x1x-som.dtsi" + +/ { + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "debug-led1"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "debug-led2"; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "debug-led3"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm8 0 5000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_adc: regulator-vref-adc { + compatible = "regulator-fixed"; + regulator-name = "vref-adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + num-channels = <3>; + vref-supply = <®_vref_adc>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + eeprom@0 { + compatible = "anvo,anv32e61w", "atmel,at25"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + spi-cpol; + pagesize = <1>; + size = <8192>; + address-width = <16>; + }; +}; + +&fec1 { + pinctrl-0 = <&pinctrl_enet1>; + /delete-node/ mdio; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + rs485-rts-active-low; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 + >; + }; + + pinctrl_enet2_mdio: enet2mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 + /* + * mux unused RTS to make sure it doesn't cause + * any interrupts when it is undefined + */ + MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1 { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 + >; + }; +};arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi new file +420
-0@@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <[email protected]> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "debug-led1"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "debug-led2"; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "debug-led3"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm8 0 5000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_adc: regulator-vref-adc { + compatible = "regulator-fixed"; + regulator-name = "vref-adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + num-channels = <3>; + vref-supply = <®_vref_adc>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + eeprom@0 { + compatible = "anvo,anv32e61w", "atmel,at25"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + spi-cpol; + pagesize = <1>; + size = <8192>; + address-width = <16>; + }; +}; + +&fec1 { + pinctrl-0 = <&pinctrl_enet1>; + /delete-node/ mdio; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + rs485-rts-active-low; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 + >; + }; + + pinctrl_enet2_mdio: enet2mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 + /* + * mux unused RTS to make sure it doesn't cause + * any interrupts when it is undefined + */ + MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1 { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 + >; + }; +};arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi new file +124
-0@@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <[email protected]> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = &uart4; + }; + + memory@80000000 { + reg = <0x80000000 0x10000000>; + device_type = "memory"; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&fec2 { + phy-mode = "rmii"; + status = "disabled"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_out>; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 + MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 + >; + }; + + pinctrl_enet1_mdio: enet1mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_reset_out: rstoutgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; +};arch/arm/dts/imx6ull-kontron-n641x-s-u-boot.dtsi new file +7
-0@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ul-kontron-n6x1x-s-u-boot.dtsi"arch/arm/dts/imx6ull-kontron-n641x-s.dts new file +16
-0@@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6ull-kontron-n641x-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N641X S"; + compatible = "kontron,imx6ull-n641x-s", "kontron,imx6ull-n641x-som", + "fsl,imx6ull"; +};arch/arm/dts/imx6ull-kontron-n641x-som.dtsi new file +13
-0@@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ull.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N641X SOM"; + compatible = "kontron,imx6ull-n641x-som", "fsl,imx6ull"; +};arch/arm/mach-imx/mx6/Kconfig +9
-0@@ -231,6 +231,14 @@ config TARGET_GW_VENTANA imply CMD_SATA imply CMD_SPL +config TARGET_KONTRON_MX6UL + bool "Kontron Electronics SL/BL i.MX6UL/ULL (N63xx/N64xx)" + depends on MX6UL + select DM + select DM_THERMAL + select SUPPORT_SPL + imply CMD_DM + config TARGET_KOSAGI_NOVENA bool "Kosagi Novena" select BOARD_LATE_INIT@@ -648,6 +656,7 @@ source "board/grinn/liteboard/Kconfig" source "board/phytec/pcm058/Kconfig" source "board/phytec/pcl063/Kconfig" source "board/gateworks/gw_ventana/Kconfig" +source "board/kontron/imx/mx6ul/Kconfig" source "board/kosagi/novena/Kconfig" source "board/softing/vining_2000/Kconfig" source "board/liebherr/display5/Kconfig"board/kontron/imx/mx6ul/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +if TARGET_KONTRON_MX6UL + +config SYS_BOARD + string + default "imx/mx6ul" + +config SYS_VENDOR + string + default "kontron" + +config SYS_CONFIG_NAME + string + default "kontron_mx6ul" + +endifboard/kontron/imx/mx6ul/Makefile new file +8
-0@@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2018 Kontron Electronics GmbH + +ifdef CONFIG_SPL_BUILD +obj-y := spl.o +else +obj-y := kontron_mx6ul.o +endifboard/kontron/imx/mx6ul/kontron_mx6ul.c new file +85
-0@@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2018 Kontron Electronics GmbH +*/ + +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/global_data.h> +#include <fdt_support.h> +#include <phy.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int dram_init (void ) +{ + gd->ram_size =imx_ddr_size (); + +return 0 ; +} + +int ft_board_setup (void *blob,struct bd_info *bd) +{ +/* +* Overwrite the memory size in the devicetree that is +* passed to the kernel with the actual size detected. +*/ +return fdt_fixup_memory (blob,PHYS_SDRAM , gd->ram_size); +} + +static int setup_fec (void ) +{ +struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR ; +int ret; + +/* +* Use 50M anatop loopback REF_CLK1 for ENET1, +* clear gpr1[13], set gpr1[17]. +*/ +clrsetbits_le32 (&iomuxc_regs->gpr[1 ],IOMUX_GPR1_FEC1_MASK , +IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK ); + +/* +* Use 50M anatop loopback REF_CLK2 for ENET2, +* clear gpr1[14], set gpr1[18]. +*/ +clrsetbits_le32 (&iomuxc_regs->gpr[1 ],IOMUX_GPR1_FEC2_MASK , +IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK ); + + ret =enable_fec_anatop_clock (0 ,ENET_50MHZ ); +if (ret) +return ret; + + ret =enable_fec_anatop_clock (1 ,ENET_50MHZ ); +if (ret) +return ret; + +return 0 ; +} + +int board_phy_config (struct phy_device *phydev) +{ +phy_write (phydev,MDIO_DEVAD_NONE ,0x1f ,0x8190 ); + +if (phydev->drv->config) + phydev->drv->config (phydev); + +return 0 ; +} + +int board_early_init_f (void ) +{ +enable_qspi_clk (0 ); + +return 0 ; +} + +int board_init (void ) +{ +/* Address of boot parameters */ + gd->bd->bi_boot_params =PHYS_SDRAM +0x100 ; + +setup_fec (); + +return 0 ; +}board/kontron/imx/mx6ul/spl.c new file +376
-0@@ -0,0 +1,376 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2018 Kontron Electronics GmbH +*/ + +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/global_data.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/mach-imx/iomux-v3.h> +#include <fsl_esdhc_imx.h> +#include <init.h> +#include <linux/delay.h> +#include <linux/sizes.h> +#include <linux/errno.h> +#include <mmc.h> + +DECLARE_GLOBAL_DATA_PTR ; + +enum { +BOARD_TYPE_KTN_N631X =1 , +BOARD_TYPE_KTN_N641X , +BOARD_TYPE_MAX +}; + +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_CD_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + +#include <spl.h> +#include <asm/arch/mx6-ddr.h> + +static iomux_v3_cfg_t const usdhc1_pads[] = { +MX6_PAD_SD1_CLK__USDHC1_CLK |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6_PAD_SD1_CMD__USDHC1_CMD |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6_PAD_SD1_DATA0__USDHC1_DATA0 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6_PAD_SD1_DATA1__USDHC1_DATA1 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6_PAD_SD1_DATA2__USDHC1_DATA2 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6_PAD_SD1_DATA3__USDHC1_DATA3 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), + +/* CD */ +MX6_PAD_UART1_RTS_B__GPIO1_IO19 |MUX_PAD_CTRL (USDHC_CD_PAD_CTRL ), +}; +#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 19) + +static iomux_v3_cfg_t const usdhc2_pads[] = { +MX6_PAD_NAND_RE_B__USDHC2_CLK |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6_PAD_NAND_WE_B__USDHC2_CMD |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6_PAD_NAND_DATA00__USDHC2_DATA0 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6_PAD_NAND_DATA01__USDHC2_DATA1 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6_PAD_NAND_DATA02__USDHC2_DATA2 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6_PAD_NAND_DATA03__USDHC2_DATA3 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +/* RST */ +MX6_PAD_NAND_ALE__GPIO4_IO10 |MUX_PAD_CTRL (NO_PAD_CTRL ), +}; +#define USDHC2_PWR_GPIO IMX_GPIO_NR(4, 10) + +static struct fsl_esdhc_cfg usdhc_cfg[2 ] = { + {USDHC1_BASE_ADDR ,0 ,4 }, + {USDHC2_BASE_ADDR ,0 ,4 }, +}; + +int board_mmc_getcd (struct mmc *mmc) +{ +struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; +int ret =0 ; + +switch (cfg->esdhc_base) { +case USDHC1_BASE_ADDR : + ret = !gpio_get_value (USDHC1_CD_GPIO ); +break ; +case USDHC2_BASE_ADDR : +// This SDHC interface does not use a CD pin + ret =1 ; +break ; + } + +return ret; +} + +int board_mmc_init (struct bd_info *bis) +{ +int i, ret; + +/* +* According to the board_mmc_init() the following map is done: +* (U-boot device node) (Physical Port) +* mmc0 USDHC1 +* mmc1 USDHC2 +*/ +for (i =0 ; i <CONFIG_SYS_FSL_USDHC_NUM ; i++) { +switch (i) { +case 0 : +imx_iomux_v3_setup_multiple_pads ( + usdhc1_pads,ARRAY_SIZE (usdhc1_pads)); +gpio_direction_input (USDHC1_CD_GPIO ); + usdhc_cfg[0 ].sdhc_clk =mxc_get_clock (MXC_ESDHC_CLK ); +break ; +case 1 : +imx_iomux_v3_setup_multiple_pads ( + usdhc2_pads,ARRAY_SIZE (usdhc2_pads)); +gpio_direction_output (USDHC2_PWR_GPIO ,0 ); +udelay (500 ); +gpio_direction_output (USDHC2_PWR_GPIO ,1 ); + usdhc_cfg[1 ].sdhc_clk =mxc_get_clock (MXC_ESDHC2_CLK ); +break ; +default : +printf ("Warning: you configured more USDHC controllers (%d) than supported by the board\n" , i +1 ); +return -EINVAL ; + } + + ret =fsl_esdhc_initialize (bis, &usdhc_cfg[i]); +if (ret) { +printf ("Warning: failed to initialize mmc dev %d\n" , i); +return ret; + } + } +return 0 ; +} + +iomux_v3_cfg_t const ecspi2_pads[] = { +MX6_PAD_CSI_DATA00__ECSPI2_SCLK |MUX_PAD_CTRL (SPI_PAD_CTRL ), +MX6_PAD_CSI_DATA02__ECSPI2_MOSI |MUX_PAD_CTRL (SPI_PAD_CTRL ), +MX6_PAD_CSI_DATA03__ECSPI2_MISO |MUX_PAD_CTRL (SPI_PAD_CTRL ), +MX6_PAD_CSI_DATA01__GPIO4_IO22 |MUX_PAD_CTRL (NO_PAD_CTRL ), +}; + +int board_spi_cs_gpio (unsigned bus,unsigned cs) +{ +return (bus ==CONFIG_SF_DEFAULT_BUS && cs ==CONFIG_SF_DEFAULT_CS ) + ? (IMX_GPIO_NR (4 ,22 )) :-1 ; +} + +static void setup_spi (void ) +{ +gpio_request (IMX_GPIO_NR (4 ,22 ),"spi2_cs0" ); +gpio_direction_output (IMX_GPIO_NR (4 ,22 ),1 ); +imx_iomux_v3_setup_multiple_pads (ecspi2_pads,ARRAY_SIZE (ecspi2_pads)); + +enable_spi_clk (true,1 ); +} + +static iomux_v3_cfg_t const uart4_pads[] = { +MX6_PAD_UART4_TX_DATA__UART4_DCE_TX |MUX_PAD_CTRL (UART_PAD_CTRL ), +MX6_PAD_UART4_RX_DATA__UART4_DCE_RX |MUX_PAD_CTRL (UART_PAD_CTRL ), +}; + +static void setup_iomux_uart (void ) +{ +imx_iomux_v3_setup_multiple_pads (uart4_pads,ARRAY_SIZE (uart4_pads)); +} + +// DDR 256MB (Hynix H5TQ2G63DFR) +static struct mx6_ddr3_cfg mem_256M_ddr = { + .mem_speed =800 , + .density =2 , + .width =16 , + .banks =8 , + .rowaddr =14 , + .coladdr =10 , + .pagesz =2 , + .trcd =1350 , + .trcmin =4950 , + .trasmin =3600 , +}; + +static struct mx6_mmdc_calibration mx6_mmcd_256M_calib = { + .p0_mpwldectrl0 =0x00000000 , + .p0_mpdgctrl0 =0x01340134 , + .p0_mprddlctl =0x40405052 , + .p0_mpwrdlctl =0x40404E48 , +}; + +// DDR 512MB (Hynix H5TQ4G63DFR) +static struct mx6_ddr3_cfg mem_512M_ddr = { + .mem_speed =800 , + .density =4 , + .width =16 , + .banks =8 , + .rowaddr =15 , + .coladdr =10 , + .pagesz =2 , + .trcd =1350 , + .trcmin =4950 , + .trasmin =3600 , +}; + +static struct mx6_mmdc_calibration mx6_mmcd_512M_calib = { + .p0_mpwldectrl0 =0x00000000 , + .p0_mpdgctrl0 =0X01440144 , + .p0_mprddlctl =0x40405454 , + .p0_mpwrdlctl =0x40404E4C , +}; + +// Common DDR parameters (256MB and 512MB) +static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = { + .grp_addds =0x00000028 , + .grp_ddrmode_ctl =0x00020000 , + .grp_b0ds =0x00000028 , + .grp_ctlds =0x00000028 , + .grp_b1ds =0x00000028 , + .grp_ddrpke =0x00000000 , + .grp_ddrmode =0x00020000 , + .grp_ddr_type =0x000c0000 , +}; + +static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { + .dram_dqm0 =0x00000028 , + .dram_dqm1 =0x00000028 , + .dram_ras =0x00000028 , + .dram_cas =0x00000028 , + .dram_odt0 =0x00000028 , + .dram_odt1 =0x00000028 , + .dram_sdba2 =0x00000000 , + .dram_sdclk_0 =0x00000028 , + .dram_sdqs0 =0x00000028 , + .dram_sdqs1 =0x00000028 , + .dram_reset =0x00000028 , +}; + +struct mx6_ddr_sysinfo ddr_sysinfo = { + .dsize =0 , + .cs_density =20 , + .ncs =1 , + .cs1_mirror =0 , + .rtt_wr =2 , + .rtt_nom =1 ,/* RTT_Nom = RZQ/2 */ + .walat =1 ,/* Write additional latency */ + .ralat =5 ,/* Read additional latency */ + .mif3_mode =3 ,/* Command prediction working mode */ + .bi_on =1 ,/* Bank interleaving enabled */ + .sde_to_rst =0x10 ,/* 14 cycles, 200us (JEDEC default) */ + .rst_to_cke =0x23 ,/* 33 cycles, 500us (JEDEC default) */ + .ddr_type =DDR_TYPE_DDR3 , + .refsel =0 ,/* Refresh cycles at 64KHz */ + .refr =1 ,/* 2 refresh commands per refresh cycle */ +}; + +static void ccgr_init (void ) +{ +struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR ; + +writel (0xFFFFFFFF , &ccm->CCGR0); +writel (0xFFFFFFFF , &ccm->CCGR1); +writel (0xFFFFFFFF , &ccm->CCGR2); +writel (0xFFFFFFFF , &ccm->CCGR3); +writel (0xFFFFFFFF , &ccm->CCGR4); +writel (0xFFFFFFFF , &ccm->CCGR5); +writel (0xFFFFFFFF , &ccm->CCGR6); +writel (0xFFFFFFFF , &ccm->CCGR7); +} + +static void spl_dram_init (void ) +{ +unsigned int size; + +// DDR RAM connection is always 16 bit wide. Init IOs. +mx6ul_dram_iocfg (16 , &mx6_ddr_ioregs, &mx6_grp_ioregs); + +// Try to detect the 512MB RAM chip first. +mx6_dram_cfg (&ddr_sysinfo, &mx6_mmcd_512M_calib, &mem_512M_ddr); + +// Get the available RAM size + size =get_ram_size ((void *)PHYS_SDRAM ,SZ_512M ); + + gd->ram_size = size; + +if (size ==SZ_512M ) { +// 512MB RAM was detected +return ; + }else if (size ==SZ_256M ) { +// 256MB RAM was detected, use correct config and calibration +mx6_dram_cfg (&ddr_sysinfo, &mx6_mmcd_256M_calib, &mem_256M_ddr); + }else { +printf ("Invalid DDR RAM size detected: %x \n" , size); + } +} + +int do_board_detect (void ) +{ +if (is_mx6ul ()) + gd->board_type =BOARD_TYPE_KTN_N631X ; +else if (is_mx6ull ()) + gd->board_type =BOARD_TYPE_KTN_N641X ; + +printf ("Kontron SL i.MX6UL%s (N6%s1x) module, %lu MB RAM detected\n" , +is_mx6ull () ?"L" :"" ,is_mx6ull () ?"4" :"3" , gd->ram_size /SZ_1M ); + +return 0 ; +} + +void board_init_f (ulong dummy) +{ +ccgr_init (); + +/* setup AIPS and disable watchdog */ +arch_cpu_init (); + +/* iomux and setup of UART and SPI */ +board_early_init_f (); + +/* setup GP timer */ +timer_init (); + +/* UART clocks enabled and gd valid - init serial console */ +preloader_console_init (); + +/* DDR initialization */ +spl_dram_init (); + +/* Clear the BSS. */ +memset (__bss_start,0 , __bss_end - __bss_start); + +/* Detect the board type */ +do_board_detect (); + +/* load/boot image from boot device */ +board_init_r (NULL ,0 ); +} + +void board_boot_order (u32 *spl_boot_list) +{ +u32 bootdev =spl_boot_device (); + +/* +* The default boot fuse settings use the SD card (MMC1) as primary +* boot device, but allow SPI NOR as a fallback boot device. +* We can't detect the fallback case and spl_boot_device() will return +* BOOT_DEVICE_MMC1 despite the actual boot device beeing SPI NOR. +* Therefore we try to load U-Boot proper vom SPI NOR after loading +* from MMC has failed. +*/ + spl_boot_list[0 ] = bootdev; + +switch (bootdev) { +case BOOT_DEVICE_MMC1 : +case BOOT_DEVICE_MMC2 : + spl_boot_list[1 ] =BOOT_DEVICE_SPI ; +break ; + } +} + +int board_early_init_f (void ) +{ +setup_iomux_uart (); +setup_spi (); + +return 0 ; +} + +int board_fit_config_name_match (const char *name) +{ +if (gd->board_type ==BOARD_TYPE_KTN_N631X &&is_mx6ul () && + !strcmp (name,"imx6ul-kontron-n631x-s" )) +return 0 ; + +if (gd->board_type ==BOARD_TYPE_KTN_N641X &&is_mx6ull () && + !strcmp (name,"imx6ull-kontron-n641x-s" )) +return 0 ; + +return -1 ; +}configs/kontron_mx6ul_defconfig new file +106
-0@@ -0,0 +1,106 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SYS_MEMTEST_START=0x80000000 +CONFIG_SYS_MEMTEST_END=0x90000000 +CONFIG_ENV_SIZE=0x10000 +CONFIG_ENV_OFFSET=0xF0000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 +CONFIG_MX6UL=y +CONFIG_TARGET_KONTRON_MX6UL=y +CONFIG_DM_GPIO=y +CONFIG_SPL_TEXT_BASE=0x00908000 +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_SPL=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="imx6ul-kontron-n631x-s" +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_BOARD_TYPES=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8A +CONFIG_SPL_SPI_LOAD=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET=y +CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FS_UUID=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=spi1.0,spi-nand0=spi4.0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi1.0:128k(spl),832k(u-boot),64k(env);spi4.0:-(UBI)" +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIST="imx6ul-kontron-n631x-s imx6ull-kontron-n641x-s" +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_ENV_SPI_BUS=y +CONFIG_ENV_SPI_BUS=2 +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y +CONFIG_DM_I2C=y +CONFIG_FSL_USDHC=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_SPI_NAND=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SF_DEFAULT_MODE=0 +CONFIG_SF_DEFAULT_SPEED=10000000 +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHYLIB=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ8XXX=y +CONFIG_DM_ETH=y +CONFIG_DM_ETH_PHY=y +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_CONS_INDEX=4 +CONFIG_MXC_UART=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y +CONFIG_MXC_SPI=y +CONFIG_IMX_THERMAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_FDT_FIXUP_PARTITIONS=yinclude/configs/kontron_common.h new file +86
-0@@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2018 Kontron Electronics GmbH +* +* Common configuration settings for the Kontron Electronics boards. +* +*/ + +#ifndef __KONTRON_COMMON_CONFIG_H +#define __KONTRON_COMMON_CONFIG_H + +#include <asm/arch/imx-regs.h> +#include <asm/mach-imx/gpio.h> +#include <linux/sizes.h> + +#ifdef CONFIG_MX6 +#include "mx6_common.h" +#ifdef CONFIG_SPL_BUILD +#include "imx6_spl.h" +#endif +#endif + +/* +* ####################################### +* ### MISC ### +* ####################################### +*/ +#define CONFIG_SYS_MALLOC_LEN SZ_64M +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* +* ####################################### +* ### Ethernet ### +* ####################################### +*/ +#ifdef CONFIG_FEC_MXC +#define CONFIG_ETHPRIME "eth0" +#else +#define CONFIG_ETHPRIME +#endif + +/* +* ####################################### +* ### USB ### +* ####################################### +*/ +#ifdef CONFIG_USB_EHCI_HCD +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#endif + +/* +* ####################################### +* ### ENVIRONMENT ### +* ####################################### +*/ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=" KONTRON_ENV_KERNEL_MTDPARTS "\0" \ + "script=boot.scr\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "kernel_addr_r=" KONTRON_ENV_KERNEL_ADDR "\0" \ + "fdt_addr_r=" KONTRON_ENV_FDT_ADDR "\0" \ + "ramdisk_addr_r=" KONTRON_ENV_RAMDISK_ADDR "\0" \ + "pxefile_addr_r=" KONTRON_ENV_PXE_ADDR "\0" \ + "scriptaddr=" KONTRON_ENV_PXE_ADDR "\0" \ + "bootdir=\0" \ + "bootdelay=3\0" \ + "ipaddr=192.168.1.11\0" \ + "serverip=192.168.1.10\0" \ + "gatewayip=192.168.1.10\0" \ + "netmask=255.255.255.0\0" \ + "ethact=" CONFIG_ETHPRIME "\0" \ + "hostname=" CONFIG_HOSTNAME "\0" \ + "bootubipart=spi-nand0\0" \ + "bootubivol=boot\0" \ + BOOTENV + +#endif /* __KONTRON_COMMON_CONFIG_H */ include/configs/kontron_mx6ul.h new file +52
-0@@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2018 Kontron Electronics GmbH +* +* Configuration settings for the Kontron i.MX6UL boards/SoMs. +*/ +#ifndef __KONTRON_MX6UL_CONFIG_H +#define __KONTRON_MX6UL_CONFIG_H + +/* DDR RAM */ +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM + +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +/* Board and environment settings */ +#define CONFIG_MXC_UART_BASE UART4_BASE +#define CONFIG_HOSTNAME "kontron-mx6ul" + +#define KONTRON_ENV_KERNEL_MTDPARTS "mtdparts=spi1.0:128k(spl),832k(u-boot),64k(env);spi4.0:192m(rootfs),-(user)" + +#define KONTRON_ENV_KERNEL_ADDR "0x82000000" +#define KONTRON_ENV_FDT_ADDR "0x83000000" +#define KONTRON_ENV_PXE_ADDR "0x83100000" +#define KONTRON_ENV_RAMDISK_ADDR "0x83200000" + +/* Common options for Kontron Electronics boards */ +#include "kontron_common.h" + +/* Boot order for distro boot */ +#ifndef CONFIG_SPL_BUILD +#define BOOT_TARGET_DEVICES (func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + func(UBIFS, ubifs, 0) \ + func(USB, usb, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> +#else +#define BOOTENV +#endif + +/* MMC Configs */ +#ifdef CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 +#endif + +#endif /* __KONTRON_MX6UL_CONFIG_H */
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH RESEND 6/6 imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
In reply to Frieder SchrempfFrom: Frieder Schrempf <[email protected]>
The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC.
The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more.
--- arch/arm/dts/Makefile | 2 + arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 116 ++ .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 237 +++ arch/arm/dts/imx8mm-kontron-n801x-s.dts | 387 ++++ arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 298 +++ arch/arm/mach-imx/imx8m/Kconfig | 8 + board/kontron/imx/mx8mm/Kconfig | 15 + board/kontron/imx/mx8mm/Makefile | 9 + board/kontron/imx/mx8mm/imximage.cfg | 9 + board/kontron/imx/mx8mm/kontron_mx8mm.c | 102 + board/kontron/imx/mx8mm/lpddr4_timing.c | 1846 +++++++++++++++++ board/kontron/imx/mx8mm/spl.c | 330 +++ configs/kontron_mx8mm_defconfig | 124 ++ include/configs/kontron_mx8mm.h | 66 + 14 files changed, 3549 insertions(+) create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-som.dtsi create mode 100644 board/kontron/imx/mx8mm/Kconfig create mode 100644 board/kontron/imx/mx8mm/Makefile create mode 100644 board/kontron/imx/mx8mm/imximage.cfg create mode 100644 board/kontron/imx/mx8mm/kontron_mx8mm.c create mode 100644 board/kontron/imx/mx8mm/lpddr4_timing.c create mode 100644 board/kontron/imx/mx8mm/spl.c create mode 100644 configs/kontron_mx8mm_defconfig create mode 100644 include/configs/kontron_mx8mm.h
arch/arm/dts/Makefile +2 -0
@@ -850,6 +850,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-evk.dtb \ imx8mm-icore-mx8mm-ctouch2.dtb \ imx8mm-icore-mx8mm-edimm2.2.dtb \ + imx8mm-kontron-n801x-s.dtb \ + imx8mm-kontron-n801x-s-lvds.dtb \ imx8mm-venice.dtb \ imx8mm-venice-gw71xx-0x.dtb \ imx8mm-venice-gw72xx-0x.dtb \
arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts new file +116 -0
116 lines not on this page · raw message
arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi new file +237 -0
237 lines not on this page · raw message
arch/arm/dts/imx8mm-kontron-n801x-s.dts new file +387 -0
387 lines not on this page · raw message
arch/arm/dts/imx8mm-kontron-n801x-som.dtsi new file +298 -0
298 lines not on this page · raw message
arch/arm/mach-imx/imx8m/Kconfig +8 -0
@@ -75,6 +75,13 @@ config TARGET_IMX8MM_VENICE select SUPPORT_SPL select IMX8M_LPDDR4 +config TARGET_KONTRON_MX8MM + bool "Kontron Electronics N80xx" + select BINMAN + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4 + config TARGET_IMX8MN_EVK bool "imx8mn LPDDR4 EVK board" select BINMAN
@@ -149,6 +156,7 @@ source "board/freescale/imx8mn_evk/Kconfig" source "board/freescale/imx8mp_evk/Kconfig" source "board/gateworks/venice/Kconfig" source "board/google/imx8mq_phanbell/Kconfig" +source "board/kontron/imx/mx8mm/Kconfig" source "board/phytec/phycore_imx8mm/Kconfig" source "board/phytec/phycore_imx8mp/Kconfig" source "board/ronetix/imx8mq-cm/Kconfig"
board/kontron/imx/mx8mm/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +if TARGET_KONTRON_MX8MM + +config SYS_BOARD + string + default "imx/mx8mm" + +config SYS_VENDOR + string + default "kontron" + +config SYS_CONFIG_NAME + string + default "kontron_mx8mm" + +endif
board/kontron/imx/mx8mm/Makefile new file +9 -0
@@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2019 Kontron Electronics GmbH + +obj-y := kontron_mx8mm.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif
board/kontron/imx/mx8mm/imximage.cfg new file +9 -0
@@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#define __ASSEMBLY__ + +BOOT_FROM sd +LOADER mkimage.flash.mkimage 0x7E1000
board/kontron/imx/mx8mm/kontron_mx8mm.c new file +102 -0
102 lines not on this page · raw message
board/kontron/imx/mx8mm/lpddr4_timing.c new file +1846 -0
1,799 lines not on this page · raw message
board/kontron/imx/mx8mm/spl.c new file +330 -0
330 lines not on this page · raw message
configs/kontron_mx8mm_defconfig new file +124 -0
124 lines not on this page · raw message
include/configs/kontron_mx8mm.h new file +66 -0
66 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.25.1
Part of the diff is not shown here. View the raw message.
Re: [RESEND PATCH 6/6] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
Quoted 37 lines · Frieder Schrempf
From: Frieder Schrempf <[email protected]>
The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC.
The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more.
Signed-off-by Frieder Schrempf <[email protected]>--- arch/arm/dts/Makefile | 2 + arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 116 ++ .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 237 +++ arch/arm/dts/imx8mm-kontron-n801x-s.dts | 387 ++++ arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 298 +++ arch/arm/mach-imx/imx8m/Kconfig | 8 + board/kontron/imx/mx8mm/Kconfig | 15 + board/kontron/imx/mx8mm/Makefile | 9 + board/kontron/imx/mx8mm/imximage.cfg | 9 + board/kontron/imx/mx8mm/kontron_mx8mm.c | 102 + board/kontron/imx/mx8mm/lpddr4_timing.c | 1846 +++++++++++++++++ board/kontron/imx/mx8mm/spl.c | 330 +++ configs/kontron_mx8mm_defconfig | 124 ++ include/configs/kontron_mx8mm.h | 66 + 14 files changed, 3549 insertions(+) create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-som.dtsi create mode 100644 board/kontron/imx/mx8mm/Kconfig create mode 100644 board/kontron/imx/mx8mm/Makefile create mode 100644 board/kontron/imx/mx8mm/imximage.cfg create mode 100644 board/kontron/imx/mx8mm/kontron_mx8mm.c create mode 100644 board/kontron/imx/mx8mm/lpddr4_timing.c create mode 100644 board/kontron/imx/mx8mm/spl.c create mode 100644 configs/kontron_mx8mm_defconfig create mode 100644 include/configs/kontron_mx8mm.h
[...]
Quoted 16 lines
board/kontron/imx/mx8mm/spl.c new file +10
-0@@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 Kontron Electronics GmbH +*/ + +#include <spl.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h>
board/kontron/imx/mx8mm/spl.c line 20
Quoted 10 lines
board/kontron/imx/mx8mm/spl.c new file +10
-0+#include <asm/mach-imx/boot_mode.h> +#include <asm/arch/ddr.h> +// #include <asm/armv8/mmu.h> +#include <asm/gpio.h> + + +#include <dm/uclass.h> +// #include <dm/device.h> +// #include <dm/uclass-internal.h> +// #include <dm/device-internal.h>
This is rubbish of course. Will fix it.
Quoted 310 lines
board/kontron/imx/mx8mm/spl.c new file +310
-0+ +#include <i2c.h> +#include <linux/errno.h> + +#include <linux/delay.h> +#include <power/pca9450.h> +#include <power/pmic.h> + +#include <asm/global_data.h> +#include <hang.h> +#include <init.h> + +DECLARE_GLOBAL_DATA_PTR ; + +enum { +BOARD_TYPE_KTN_N801X , +BOARD_TYPE_KTN_N801X_LVDS , +BOARD_TYPE_MAX +}; + +#define GPIO_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) +#define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) + +#define TOUCH_RESET_GPIO IMX_GPIO_NR(3, 23) + +static iomux_v3_cfg_t const i2c1_pads[] = { +IMX8MM_PAD_I2C1_SCL_I2C1_SCL |MUX_PAD_CTRL (I2C_PAD_CTRL ) |MUX_MODE_SION , +IMX8MM_PAD_I2C1_SDA_I2C1_SDA |MUX_PAD_CTRL (I2C_PAD_CTRL ) |MUX_MODE_SION +}; + +static iomux_v3_cfg_t const i2c2_pads[] = { +IMX8MM_PAD_I2C2_SCL_I2C2_SCL |MUX_PAD_CTRL (I2C_PAD_CTRL ) |MUX_MODE_SION , +IMX8MM_PAD_I2C2_SDA_I2C2_SDA |MUX_PAD_CTRL (I2C_PAD_CTRL ) |MUX_MODE_SION +}; + +static iomux_v3_cfg_t const touch_gpio[] = { +IMX8MM_PAD_SAI5_RXD2_GPIO3_IO23 |MUX_PAD_CTRL (GPIO_PAD_CTRL ) +}; + +static iomux_v3_cfg_t const uart_pads[] = { +IMX8MM_PAD_UART3_RXD_UART3_RX |MUX_PAD_CTRL (UART_PAD_CTRL ), +IMX8MM_PAD_UART3_TXD_UART3_TX |MUX_PAD_CTRL (UART_PAD_CTRL ), +}; + +static iomux_v3_cfg_t const wdog_pads[] = { +IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B |MUX_PAD_CTRL (WDOG_PAD_CTRL ), +}; + +int spl_board_boot_device (enum boot_device boot_dev_spl) +{ +switch (boot_dev_spl) { +case USB_BOOT : +return BOOT_DEVICE_BOARD ; +case SPI_NOR_BOOT : +return BOOT_DEVICE_SPI ; +case SD1_BOOT : +case MMC1_BOOT : +return BOOT_DEVICE_MMC1 ; +case SD2_BOOT : +case MMC2_BOOT : +return BOOT_DEVICE_MMC2 ; +default : +return BOOT_DEVICE_NONE ; + } +} + +bool check_ram_available (long int size) +{ +long int sz =get_ram_size ((long int *)PHYS_SDRAM , size); + +if (sz == size) +return true; + +return false; +} + +static void spl_dram_init (void ) +{ +u32 size =0 ; + +/* +* Try the default DDR settings in lpddr4_timing.c to +* comply with the Micron 4GB DDR. +*/ +if (!ddr_init (&dram_timing) &&check_ram_available (SZ_4G )) { + size =4 ; + }else { +/* +* Overwrite some values to comply with the Micron 1GB/2GB DDRs. +*/ + dram_timing.ddrc_cfg[2 ].val =0xa1080020 ; + dram_timing.ddrc_cfg[37 ].val =0x1f ; + + dram_timing.fsp_msg[0 ].fsp_cfg[9 ].val =0x110 ; + dram_timing.fsp_msg[0 ].fsp_cfg[21 ].val =0x1 ; + dram_timing.fsp_msg[1 ].fsp_cfg[10 ].val =0x110 ; + dram_timing.fsp_msg[1 ].fsp_cfg[22 ].val =0x1 ; + dram_timing.fsp_msg[2 ].fsp_cfg[10 ].val =0x110 ; + dram_timing.fsp_msg[2 ].fsp_cfg[22 ].val =0x1 ; + dram_timing.fsp_msg[3 ].fsp_cfg[10 ].val =0x110 ; + dram_timing.fsp_msg[3 ].fsp_cfg[22 ].val =0x1 ; + +if (!ddr_init (&dram_timing)) { +if (check_ram_available (SZ_2G )) + size =2 ; +else if (check_ram_available (SZ_1G )) + size =1 ; + } + } + +if (size ==0 ) { +printf ("Failed to initialize DDR RAM!\n" ); + size =1 ; + } + +printf ("Kontron SL i.MX8MM (N801X) module, %u GB RAM detected\n" , size); +writel (size,M4_BOOTROM_BASE_ADDR ); +} + +static void touch_reset (void ) +{ +/* +* Toggle the reset of the touch panel. +*/ +imx_iomux_v3_setup_multiple_pads (touch_gpio,ARRAY_SIZE (touch_gpio)); + +gpio_request (TOUCH_RESET_GPIO ,"touch_reset" ); +gpio_direction_output (TOUCH_RESET_GPIO ,0 ); +mdelay (20 ); +gpio_direction_output (TOUCH_RESET_GPIO ,1 ); +mdelay (20 ); +} + +static int i2c_detect (uint8_t bus,uint16_t addr) +{ +struct udevice *udev; +int ret; + +/* +* Try to probe the touch controller to check if an LVDS panel is +* connected. +*/ + ret =i2c_get_chip_for_busnum (bus, addr,0 , &udev); +if (ret ==0 ) +return 0 ; + +return 1 ; +} + +int do_board_detect (void ) +{ +bool lvds = false; + +/* +* Check the I2C touch controller to detect a LVDS panel. +*/ +imx_iomux_v3_setup_multiple_pads (i2c2_pads,ARRAY_SIZE (i2c2_pads)); +touch_reset (); + +if (i2c_detect (1 ,0x5d ) ==0 ) { +printf ("Touch controller detected, " +"assuming LVDS panel...\n" ); + lvds = true; + } + +/* +* Check the I2C PMIC to detect the deprecated SoM with DA9063. +*/ +imx_iomux_v3_setup_multiple_pads (i2c1_pads,ARRAY_SIZE (i2c1_pads)); + +if (i2c_detect (0 ,0x58 ) ==0 ) { +printf ("### ATTENTION: DEPRECATED SOM REVISION (N8010 Rev0) DETECTED! ###\n" ); +printf ("### THIS HW IS NOT SUPPRTED AND BOOTING WILL PROBABLY FAIL ###\n" ); +printf ("### PLEASE UPGRADE TO LATEST MODULE ###\n" ); + } + +if (lvds) + gd->board_type =BOARD_TYPE_KTN_N801X_LVDS ; +else + gd->board_type =BOARD_TYPE_KTN_N801X ; + +return 0 ; +} + +int board_fit_config_name_match (const char *name) +{ +if (gd->board_type ==BOARD_TYPE_KTN_N801X_LVDS &&is_imx8mm () && + !strncmp (name,"imx8mm-kontron-n801x-s-lvds" ,27 )) +return 0 ; + +if (gd->board_type ==BOARD_TYPE_KTN_N801X &&is_imx8mm () && + !strncmp (name,"imx8mm-kontron-n801x-s" ,22 )) +return 0 ; + +return -1 ; +} + +void spl_board_init (void ) +{ +struct udevice *dev; +int ret; + +puts ("Normal Boot\n" ); + + ret =uclass_get_device_by_name (UCLASS_CLK , +"clock-controller@30380000" , + &dev); +if (ret <0 ) +printf ("Failed to find clock node. Check device tree\n" ); +} + +int board_early_init_f (void ) +{ +struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR ; + +imx_iomux_v3_setup_multiple_pads (wdog_pads,ARRAY_SIZE (wdog_pads)); + +set_wdog_reset (wdog); + +imx_iomux_v3_setup_multiple_pads (uart_pads,ARRAY_SIZE (uart_pads)); + +return 0 ; +} + +static int power_init_board (void ) +{ +struct udevice *dev; +int ret =pmic_get ("pmic@25" , &dev); + +if (ret == -ENODEV ) +puts ("No pmic found\n" ); + +if (ret) +return ret; + +/* BUCKxOUT_DVS0/1 control BUCK123 output, clear PRESET_EN */ +pmic_reg_write (dev,PCA9450_BUCK123_DVS ,0x29 ); + +/* increase VDD_DRAM to 0.95V for 1.5GHz DDR */ +pmic_reg_write (dev,PCA9450_BUCK3OUT_DVS0 ,0x1c ); + +/* set VDD_SNVS_0V8 from default 0.85V to 0.8V */ +pmic_reg_write (dev,PCA9450_LDO2CTRL ,0xC0 ); + +/* set WDOG_B_CFG to cold reset */ +pmic_reg_write (dev,PCA9450_RESET_CTRL ,0xA1 ); + +return 0 ; +} + +void board_init_f (ulong dummy) +{ +int ret; + +arch_cpu_init (); + +init_uart_clk (2 ); + +board_early_init_f (); + +timer_init (); + +preloader_console_init (); + +/* Clear the BSS. */ +memset (__bss_start,0 , __bss_end - __bss_start); + + ret =spl_init (); +if (ret) { +debug ("spl_init() failed: %d\n" , ret); +hang (); + } + +enable_tzc380 (); + +/* PMIC initialization */ +power_init_board (); + +/* DDR initialization */ +spl_dram_init (); + +/* Detect the board type */ +do_board_detect (); + +board_init_r (NULL ,0 ); +} + +void board_boot_order (u32 *spl_boot_list) +{ +u32 bootdev =spl_boot_device (); + +/* +* The default boot fuse settings use the SD card (MMC2) as primary +* boot device, but allow SPI NOR as a fallback boot device. +* We can't detect the fallback case and spl_boot_device() will return +* BOOT_DEVICE_MMC2 despite the actual boot device beeing SPI NOR. +* Therefore we try to load U-Boot proper vom SPI NOR after loading +* from MMC has failed. +*/ + spl_boot_list[0 ] = bootdev; + +switch (bootdev) { +case BOOT_DEVICE_MMC1 : +case BOOT_DEVICE_MMC2 : + spl_boot_list[1 ] =BOOT_DEVICE_SPI ; +break ; + } +}
Re: [RESEND PATCH 6/6] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
In reply to Frieder SchrempfHi Frieder,
board/kontron/imx/mx8mm/spl.c
Quoted 3,176 lines · Frieder Schrempf
From: Frieder Schrempf <[email protected]>
The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC.
The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more.
Signed-off-by Frieder Schrempf <[email protected]>--- arch/arm/dts/Makefile | 2 + arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 116 ++ .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 237 +++ arch/arm/dts/imx8mm-kontron-n801x-s.dts | 387 ++++ arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 298 +++ arch/arm/mach-imx/imx8m/Kconfig | 8 + board/kontron/imx/mx8mm/Kconfig | 15 + board/kontron/imx/mx8mm/Makefile | 9 + board/kontron/imx/mx8mm/imximage.cfg | 9 + board/kontron/imx/mx8mm/kontron_mx8mm.c | 102 + board/kontron/imx/mx8mm/lpddr4_timing.c | 1846 +++++++++++++++++ board/kontron/imx/mx8mm/spl.c | 330 +++ configs/kontron_mx8mm_defconfig | 124 ++ include/configs/kontron_mx8mm.h | 66 + 14 files changed, 3549 insertions(+)create mode 100644
arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dtscreate mode 100644arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsicreate mode 100644arch/arm/dts/imx8mm-kontron-n801x-s.dtscreate mode 100644arch/arm/dts/imx8mm-kontron-n801x-som.dtsicreate mode 100644 board/kontron/imx/mx8mm/Kconfig create mode 100644 board/kontron/imx/mx8mm/Makefile create mode 100644 board/kontron/imx/mx8mm/imximage.cfg create mode 100644board/kontron/imx/mx8mm/kontron_mx8mm.ccreate mode 100644board/kontron/imx/mx8mm/lpddr4_timing.ccreate mode 100644board/kontron/imx/mx8mm/spl.c
create mode 100644 configs/kontron_mx8mm_defconfig create mode 100644include/configs/kontron_mx8mm.harch/arm/dts/Makefile +2
-0@@ -850,6 +850,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-evk.dtb \ imx8mm-icore-mx8mm-ctouch2.dtb \ imx8mm-icore-mx8mm-edimm2.2.dtb \ + imx8mm-kontron-n801x-s.dtb \ + imx8mm-kontron-n801x-s-lvds.dtb \ imx8mm-venice.dtb \ imx8mm-venice-gw71xx-0x.dtb \ imx8mm-venice-gw72xx-0x.dtb \arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts new file +116
-0@@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm-kontron-n801x-s.dts" + +/ { + model = "Kontron i.MX8MM N801X S LVDS"; + compatible = "kontron,imx8mm-n801x-s-lvds", "fsl,imx8mm"; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; /* period = 5000000 ns => f = 200 Hz */ + power-supply = <®_vdd_24v>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <100>; + status = "okay"; + }; + + reg_panel_pwr: regpanel-pwr { + compatible = "regulator-fixed"; + regulator-name = "reg_panel_pwr"; + regulator-always-on; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_panel_rst: regpanel-rst { + compatible = "regulator-fixed"; + regulator-name = "reg_panel_rst"; + regulator-always-on; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_panel_stby: regpanel-stby { + compatible = "regulator-fixed"; + regulator-name = "reg_panel_stby"; + regulator-always-on; + gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_panel_hinv: regpanel-hinv { + compatible = "regulator-fixed"; + regulator-name = "reg_panel_hinv"; + regulator-always-on; + gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_panel_vinv: regpanel-vinv { + compatible = "regulator-fixed"; + regulator-name = "reg_panel_vinv"; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vdd_24v: regulator-24v { + compatible = "regulator-fixed"; + regulator-name = "reg-vdd-24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-boot-on; + regulator-always-on; + status = "okay"; + }; +}; + +&i2c2 { + status = "okay"; + + gt911@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio3>; + interrupts = <22 8>; + reset-gpios = <&gpio3 23 0>; + irq-gpios = <&gpio3 22 0>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&iomuxc { + pinctrl_panel: panelgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19 /* TFT-PWR - family */ + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 /* RESET family */ + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 /* STBY family */ + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x19 /* HINV panel */ + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 /* VINV panel */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x6 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 /* Touch Interrupt */ + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19 /* Touch Reset */ + >; + }; +};arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi new file +237
-0@@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm-u-boot.dtsi" + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + binman: binman { + multiple-images; + }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + u-boot,dm-spl; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&fec1 { + phy-mode = "rgmii-rxid"; + phy-reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + phy-reset-post-delay = <100>; +}; + +&i2c1 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&i2c2 { + status = "okay"; + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&pinctrl_ecspi1 { + u-boot,dm-spl; +}; + +&pinctrl_i2c1 { + u-boot,dm-spl; +}; + +&pinctrl_pmic { + u-boot,dm-spl; + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + /* Disable Pullup for SD_VSEL */ + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41 + >; +}; + +&pinctrl_uart3 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&pinctrl_usdhc1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1_100mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1_200mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2 { + u-boot,dm-spl; +}; + +&pca9450 { + u-boot,dm-spl; +}; + +&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} { + u-boot,dm-spl; +}; + +&ecspi1 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&uart3 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; + +&wdog1 { + u-boot,dm-spl; +}; + +&binman { + u-boot-spl-ddr { + filename = "u-boot-spl-ddr.bin"; + pad-byte = <0xff>; + align-size = <4>; + align = <4>; + + u-boot-spl { + align-end = <4>; + }; + + blob_1: blob-ext@1 { + filename = "lpddr4_pmu_train_1d_imem.bin"; + size = <0x8000>; + }; + + blob_2: blob-ext@2 { + filename = "lpddr4_pmu_train_1d_dmem.bin"; + size = <0x4000>; + }; + + blob_3: blob-ext@3 { + filename = "lpddr4_pmu_train_2d_imem.bin"; + size = <0x8000>; + }; + + blob_4: blob-ext@4 { + filename = "lpddr4_pmu_train_2d_dmem.bin"; + size = <0x4000>; + }; + }; + + + flash { + mkimage { + args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000"; + + blob { + filename = "u-boot-spl-ddr.bin"; + }; + }; + }; + + itb { + filename = "u-boot.itb"; + + fit { + description = "Configuration to load ATF before U-Boot"; + #address-cells = <1>; + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; + + images { + uboot { + description = "U-Boot (64-bit)"; + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SYS_TEXT_BASE>; + + uboot_blob: blob-ext { + filename = "u-boot-nodtb.bin"; + }; + }; + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x920000>; + entry = <0x920000>; + + atf_blob: blob-ext { + filename = "bl31.bin"; + }; + }; + + fdt { + description = "NAME"; + type = "flat_dt"; + compression = "none"; + + uboot_fdt_blob: blob-ext { + filename = "u-boot.dtb"; + }; + }; + }; + + configurations { + default = "conf"; + + conf { + description = "NAME"; + firmware = "uboot"; + loadables = "atf"; + fdt = "fdt"; + }; + }; + }; + }; +};arch/arm/dts/imx8mm-kontron-n801x-s.dts new file +387
-0@@ -0,0 +1,387 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-n801x-som.dtsi" +#include <dt-bindings/net/mscc-phy-vsc8531.h> + +/ { + model = "Kontron i.MX8MM N801X S"; + compatible = "kontron,imx8mm-n801x-s", "kontron,imx8mm-n801x-som", "fsl,imx8mm"; + + aliases { + ethernet1 = &usbnet; + }; + + /* fixed crystal dedicated to mcp2515 */ + osc_can: clock-osc-can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "osc-can"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led1 { + label = "led1"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "led3"; + gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + }; + + led4 { + label = "led4"; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + }; + + led5 { + label = "led5"; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + }; + + led6 { + label = "led6"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm2 0 5000 0>; + }; + + reg_rst_eth2: regulator-rst-eth2 { + compatible = "regulator-fixed"; + regulator-name = "rst-usb-eth2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth2>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_vdd_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + clocks = <&osc_can>; + interrupt-parent = <&gpio4>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + vdd-supply = <®_vdd_3v3>; + xceiver-supply = <®_vdd_5v>; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-connection-type = "rgmii-rxid"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.0570"; + reg = <0>; + reset-assert-us = <100>; + reset-deassert-us = <100>; + reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; + vsc8531,led-0-mode = <VSC8531_LINK_100_1000_ACTIVITY>; + vsc8531,led-1-mode = <VSC8531_LINK_ACTIVITY>; + vsc8531,led-0-combine-disable; + }; + }; +}; + +&gpio4 { + dsi_mux_sel: dsi_mux_sel { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "dsi-mux-sel"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi_sel>; + }; + + dsi_mux_oe { + gpio-hog; + gpios = <15 GPIO_ACTIVE_LOW>; + output-high; + line-name = "dsi-mux-oe"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi_oe>; + }; +}; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + over-current-active-low; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + pinctrl_can: cangrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + >; + }; + + pinctrl_dsi_sel: dsiselgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x19 + >; + }; + + pinctrl_dsi_oe: dsioegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + >; + }; + + pinctrl_usb_eth2: usbeth2grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; +};arch/arm/dts/imx8mm-kontron-n801x-som.dtsi new file +298
-0@@ -0,0 +1,298 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm.dtsi" + +/ { + model = "Kontron i.MX8MM N801X SoM"; + compatible = "kontron,imx8mm-n801x-som", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + /* + * There are multiple SoM flavors with different DDR sizes. + * The smallest is 1GB. For larger sizes the bootloader will + * update the reg property. + */ + reg = <0x0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = &uart3; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + reg = <0>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_dram: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_snvs: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdda: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_phy: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&uart3 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +};arch/arm/mach-imx/imx8m/Kconfig +8
-0@@ -75,6 +75,13 @@ config TARGET_IMX8MM_VENICE select SUPPORT_SPL select IMX8M_LPDDR4 +config TARGET_KONTRON_MX8MM + bool "Kontron Electronics N80xx" + select BINMAN + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4 + config TARGET_IMX8MN_EVK bool "imx8mn LPDDR4 EVK board" select BINMAN@@ -149,6 +156,7 @@ source "board/freescale/imx8mn_evk/Kconfig" source "board/freescale/imx8mp_evk/Kconfig" source "board/gateworks/venice/Kconfig" source "board/google/imx8mq_phanbell/Kconfig" +source "board/kontron/imx/mx8mm/Kconfig" source "board/phytec/phycore_imx8mm/Kconfig" source "board/phytec/phycore_imx8mp/Kconfig" source "board/ronetix/imx8mq-cm/Kconfig"board/kontron/imx/mx8mm/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +if TARGET_KONTRON_MX8MM + +config SYS_BOARD + string + default "imx/mx8mm" + +config SYS_VENDOR + string + default "kontron" + +config SYS_CONFIG_NAME + string + default "kontron_mx8mm" + +endifboard/kontron/imx/mx8mm/Makefile new file +9
-0@@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2019 Kontron Electronics GmbH + +obj-y := kontron_mx8mm.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endifboard/kontron/imx/mx8mm/imximage.cfg new file +9
-0@@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#define __ASSEMBLY__ + +BOOT_FROM sd +LOADER mkimage.flash.mkimage 0x7E1000board/kontron/imx/mx8mm/kontron_mx8mm.c new file +102
-0@@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 Kontron Electronics GmbH +*/ + +#include <asm/arch/imx-regs.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <fdt_support.h> +#include <linux/errno.h> +#include <net.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int board_phys_sdram_size (phys_size_t *size) +{ +u32 ddr_size =readl (M4_BOOTROM_BASE_ADDR ); + +if (ddr_size ==4 ) { + *size =0x100000000 ; + }else if (ddr_size ==3 ) { + *size =0xc0000000 ; + }else if (ddr_size ==2 ) { + *size =0x80000000 ; + }else if (ddr_size ==1 ) { + *size =0x40000000 ; + }else { +printf ("Unknown DDR type!!!\n" ); + *size =0x40000000 ; + } + +return 0 ; +} + +/* +* If the SoM is mounted on a baseboard with a USB ethernet controller, +* there might be an additional MAC address programmed to the MAC OTP fuses. +* Although the i.MX8MM has only one MAC, the MAC0, MAC1 and MAC2 registers +* in the OTP fuses can still be used to store two separate addresses. +* Try to read the secondary address from MAC1 and MAC2 and adjust the +* devicetree so Linux can pick up the MAC address. +*/ +int fdt_set_usb_eth_addr (void *blob) +{ +u32 value =readl (OCOTP_BASE_ADDR +0x660 ); +unsigned char mac[6 ]; +int node, ret; + + mac[0 ] = value >>24 ; + mac[1 ] = value >>16 ; + mac[2 ] = value >>8 ; + mac[3 ] = value; + + value =readl (OCOTP_BASE_ADDR +0x650 ); + mac[4 ] = value >>24 ; + mac[5 ] = value >>16 ; + + node =fdt_path_offset (blob,fdt_get_alias (blob,"ethernet1" )); +if (node <0 ) { +/* +* There is no node for the USB ethernet in the devicetree. Just skip. +*/ +return 0 ; + } + +if (is_zero_ethaddr (mac)) { +printf ("\nNo MAC address for USB ethernet " +"set in OTP fuses!\n" ); +return 0 ; + } + +if (!is_valid_ethaddr (mac)) { +printf ("\nInvalid MAC address for USB ethernet " +"set in OTP fuses!\n" ); +return -EINVAL ; + } + + ret =fdt_setprop (blob, node,"local-mac-address" , &mac,6 ); +if (ret) + ret =fdt_setprop (blob, node,"mac-address" , &mac,6 ); + +if (ret) { +printf ("\nMissing mac-address or local-mac-addresss property in dt, " +"skip setting MAC address for USB ethernet\n" ); + } + +return 0 ; +} + +int ft_board_setup (void *blob,struct bd_info *bd) +{ +int ret =fdt_set_usb_eth_addr (blob); +if (ret) +return ret; + +return fdt_fixup_memory (blob,PHYS_SDRAM , gd->ram_size); +} + +int board_init (void ) +{ +return 0 ; +}board/kontron/imx/mx8mm/lpddr4_timing.c new file +1846
-0@@ -0,0 +1,1846 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 Kontron Electronics GmbH +*/ + +#include <linux/kernel.h> +#include <common.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +struct dram_cfg_param ddr_ddrc_cfg[] = { +/** Initialize DDRC registers **/ + {0x3d400304 ,0x1 }, + {0x3d400030 ,0x1 }, + {0x3d400000 ,0xa3080020 }, + {0x3d400020 ,0x223 }, + {0x3d400024 ,0x3a980 }, + {0x3d400064 ,0x5b0087 }, + {0x3d4000d0 ,0xc00305ba }, + {0x3d4000d4 ,0x940000 }, + {0x3d4000dc ,0xd4002d }, + {0x3d4000e0 ,0x310000 }, + {0x3d4000e8 ,0x66004d }, + {0x3d4000ec ,0x16004d }, + {0x3d400100 ,0x191e1920 }, + {0x3d400104 ,0x60630 }, + {0x3d40010c ,0xb0b000 }, + {0x3d400110 ,0xe04080e }, + {0x3d400114 ,0x2040c0c }, + {0x3d400118 ,0x1010007 }, + {0x3d40011c ,0x401 }, + {0x3d400130 ,0x20600 }, + {0x3d400134 ,0xc100002 }, + {0x3d400138 ,0xd8 }, + {0x3d400144 ,0x96004b }, + {0x3d400180 ,0x2ee0017 }, + {0x3d400184 ,0x2605b8e }, + {0x3d400188 ,0x0 }, + {0x3d400190 ,0x497820a }, + {0x3d400194 ,0x80303 }, + {0x3d4001b4 ,0x170a }, + {0x3d4001a0 ,0xe0400018 }, + {0x3d4001a4 ,0xdf00e4 }, + {0x3d4001a8 ,0x80000000 }, + {0x3d4001b0 ,0x11 }, + {0x3d4001c0 ,0x1 }, + {0x3d4001c4 ,0x1 }, + {0x3d4000f4 ,0xc99 }, + {0x3d400108 ,0x70e1617 }, + {0x3d400200 ,0x17 }, + {0x3d40020c ,0x0 }, + {0x3d400210 ,0x1f1f }, + {0x3d400204 ,0x80808 }, + {0x3d400214 ,0x7070707 }, + {0x3d400218 ,0x7070707 }, + {0x3d400250 ,0x29001701 }, + {0x3d400254 ,0x2c }, + {0x3d40025c ,0x4000030 }, + {0x3d400264 ,0x900093e7 }, + {0x3d40026c ,0x2005574 }, + {0x3d400400 ,0x111 }, + {0x3d400408 ,0x72ff }, + {0x3d400494 ,0x2100e07 }, + {0x3d400498 ,0x620096 }, + {0x3d40049c ,0x1100e07 }, + {0x3d4004a0 ,0xc8012c }, + {0x3d402020 ,0x21 }, + {0x3d402024 ,0x7d00 }, + {0x3d402050 ,0x20d040 }, + {0x3d402064 ,0xc001c }, + {0x3d4020dc ,0x840000 }, + {0x3d4020e0 ,0x310000 }, + {0x3d4020e8 ,0x66004d }, + {0x3d4020ec ,0x16004d }, + {0x3d402100 ,0xa040305 }, + {0x3d402104 ,0x30407 }, + {0x3d402108 ,0x203060b }, + {0x3d40210c ,0x505000 }, + {0x3d402110 ,0x2040202 }, + {0x3d402114 ,0x2030202 }, + {0x3d402118 ,0x1010004 }, + {0x3d40211c ,0x301 }, + {0x3d402130 ,0x20300 }, + {0x3d402134 ,0xa100002 }, + {0x3d402138 ,0x1d }, + {0x3d402144 ,0x14000a }, + {0x3d402180 ,0x640004 }, + {0x3d402190 ,0x3818200 }, + {0x3d402194 ,0x80303 }, + {0x3d4021b4 ,0x100 }, + {0x3d403020 ,0x21 }, + {0x3d403024 ,0x1f40 }, + {0x3d403050 ,0x20d040 }, + {0x3d403064 ,0x30007 }, + {0x3d4030dc ,0x840000 }, + {0x3d4030e0 ,0x310000 }, + {0x3d4030e8 ,0x66004d }, + {0x3d4030ec ,0x16004d }, + {0x3d403100 ,0xa010102 }, + {0x3d403104 ,0x30404 }, + {0x3d403108 ,0x203060b }, + {0x3d40310c ,0x505000 }, + {0x3d403110 ,0x2040202 }, + {0x3d403114 ,0x2030202 }, + {0x3d403118 ,0x1010004 }, + {0x3d40311c ,0x301 }, + {0x3d403130 ,0x20300 }, + {0x3d403134 ,0xa100002 }, + {0x3d403138 ,0x8 }, + {0x3d403144 ,0x50003 }, + {0x3d403180 ,0x190004 }, + {0x3d403190 ,0x3818200 }, + {0x3d403194 ,0x80303 }, + {0x3d4031b4 ,0x100 }, + {0x3d400028 ,0x0 }, +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param ddr_ddrphy_cfg[] = { + {0x100a0 ,0x0 }, + {0x100a1 ,0x1 }, + {0x100a2 ,0x2 }, + {0x100a3 ,0x3 }, + {0x100a4 ,0x4 }, + {0x100a5 ,0x5 }, + {0x100a6 ,0x6 }, + {0x100a7 ,0x7 }, + {0x110a0 ,0x0 }, + {0x110a1 ,0x1 }, + {0x110a2 ,0x3 }, + {0x110a3 ,0x4 }, + {0x110a4 ,0x5 }, + {0x110a5 ,0x2 }, + {0x110a6 ,0x7 }, + {0x110a7 ,0x6 }, + {0x120a0 ,0x0 }, + {0x120a1 ,0x1 }, + {0x120a2 ,0x3 }, + {0x120a3 ,0x2 }, + {0x120a4 ,0x5 }, + {0x120a5 ,0x4 }, + {0x120a6 ,0x7 }, + {0x120a7 ,0x6 }, + {0x130a0 ,0x0 }, + {0x130a1 ,0x1 }, + {0x130a2 ,0x2 }, + {0x130a3 ,0x3 }, + {0x130a4 ,0x4 }, + {0x130a5 ,0x5 }, + {0x130a6 ,0x6 }, + {0x130a7 ,0x7 }, + {0x1005f ,0x1ff }, + {0x1015f ,0x1ff }, + {0x1105f ,0x1ff }, + {0x1115f ,0x1ff }, + {0x1205f ,0x1ff }, + {0x1215f ,0x1ff }, + {0x1305f ,0x1ff }, + {0x1315f ,0x1ff }, + {0x11005f ,0x1ff }, + {0x11015f ,0x1ff }, + {0x11105f ,0x1ff }, + {0x11115f ,0x1ff }, + {0x11205f ,0x1ff }, + {0x11215f ,0x1ff }, + {0x11305f ,0x1ff }, + {0x11315f ,0x1ff }, + {0x21005f ,0x1ff }, + {0x21015f ,0x1ff }, + {0x21105f ,0x1ff }, + {0x21115f ,0x1ff }, + {0x21205f ,0x1ff }, + {0x21215f ,0x1ff }, + {0x21305f ,0x1ff }, + {0x21315f ,0x1ff }, + {0x55 ,0x1ff }, + {0x1055 ,0x1ff }, + {0x2055 ,0x1ff }, + {0x3055 ,0x1ff }, + {0x4055 ,0x1ff }, + {0x5055 ,0x1ff }, + {0x6055 ,0x1ff }, + {0x7055 ,0x1ff }, + {0x8055 ,0x1ff }, + {0x9055 ,0x1ff }, + {0x200c5 ,0x19 }, + {0x1200c5 ,0x7 }, + {0x2200c5 ,0x7 }, + {0x2002e ,0x2 }, + {0x12002e ,0x2 }, + {0x22002e ,0x2 }, + {0x90204 ,0x0 }, + {0x190204 ,0x0 }, + {0x290204 ,0x0 }, + {0x20024 ,0x1ab }, + {0x2003a ,0x0 }, + {0x120024 ,0x1ab }, + {0x2003a ,0x0 }, + {0x220024 ,0x1ab }, + {0x2003a ,0x0 }, + {0x20056 ,0x3 }, + {0x120056 ,0x3 }, + {0x220056 ,0x3 }, + {0x1004d ,0xe00 }, + {0x1014d ,0xe00 }, + {0x1104d ,0xe00 }, + {0x1114d ,0xe00 }, + {0x1204d ,0xe00 }, + {0x1214d ,0xe00 }, + {0x1304d ,0xe00 }, + {0x1314d ,0xe00 }, + {0x11004d ,0xe00 }, + {0x11014d ,0xe00 }, + {0x11104d ,0xe00 }, + {0x11114d ,0xe00 }, + {0x11204d ,0xe00 }, + {0x11214d ,0xe00 }, + {0x11304d ,0xe00 }, + {0x11314d ,0xe00 }, + {0x21004d ,0xe00 }, + {0x21014d ,0xe00 }, + {0x21104d ,0xe00 }, + {0x21114d ,0xe00 }, + {0x21204d ,0xe00 }, + {0x21214d ,0xe00 }, + {0x21304d ,0xe00 }, + {0x21314d ,0xe00 }, + {0x10049 ,0xeba }, + {0x10149 ,0xeba }, + {0x11049 ,0xeba }, + {0x11149 ,0xeba }, + {0x12049 ,0xeba }, + {0x12149 ,0xeba }, + {0x13049 ,0xeba }, + {0x13149 ,0xeba }, + {0x110049 ,0xeba }, + {0x110149 ,0xeba }, + {0x111049 ,0xeba }, + {0x111149 ,0xeba }, + {0x112049 ,0xeba }, + {0x112149 ,0xeba }, + {0x113049 ,0xeba }, + {0x113149 ,0xeba }, + {0x210049 ,0xeba }, + {0x210149 ,0xeba }, + {0x211049 ,0xeba }, + {0x211149 ,0xeba }, + {0x212049 ,0xeba }, + {0x212149 ,0xeba }, + {0x213049 ,0xeba }, + {0x213149 ,0xeba }, + {0x43 ,0x63 }, + {0x1043 ,0x63 }, + {0x2043 ,0x63 }, + {0x3043 ,0x63 }, + {0x4043 ,0x63 }, + {0x5043 ,0x63 }, + {0x6043 ,0x63 }, + {0x7043 ,0x63 }, + {0x8043 ,0x63 }, + {0x9043 ,0x63 }, + {0x20018 ,0x3 }, + {0x20075 ,0x4 }, + {0x20050 ,0x0 }, + {0x20008 ,0x2ee }, + {0x120008 ,0x64 }, + {0x220008 ,0x19 }, + {0x20088 ,0x9 }, + {0x200b2 ,0xdc }, + {0x10043 ,0x5a1 }, + {0x10143 ,0x5a1 }, + {0x11043 ,0x5a1 }, + {0x11143 ,0x5a1 }, + {0x12043 ,0x5a1 }, + {0x12143 ,0x5a1 }, + {0x13043 ,0x5a1 }, + {0x13143 ,0x5a1 }, + {0x1200b2 ,0xdc }, + {0x110043 ,0x5a1 }, + {0x110143 ,0x5a1 }, + {0x111043 ,0x5a1 }, + {0x111143 ,0x5a1 }, + {0x112043 ,0x5a1 }, + {0x112143 ,0x5a1 }, + {0x113043 ,0x5a1 }, + {0x113143 ,0x5a1 }, + {0x2200b2 ,0xdc }, + {0x210043 ,0x5a1 }, + {0x210143 ,0x5a1 }, + {0x211043 ,0x5a1 }, + {0x211143 ,0x5a1 }, + {0x212043 ,0x5a1 }, + {0x212143 ,0x5a1 }, + {0x213043 ,0x5a1 }, + {0x213143 ,0x5a1 }, + {0x200fa ,0x1 }, + {0x1200fa ,0x1 }, + {0x2200fa ,0x1 }, + {0x20019 ,0x1 }, + {0x120019 ,0x1 }, + {0x220019 ,0x1 }, + {0x200f0 ,0x660 }, + {0x200f1 ,0x0 }, + {0x200f2 ,0x4444 }, + {0x200f3 ,0x8888 }, + {0x200f4 ,0x5665 }, + {0x200f5 ,0x0 }, + {0x200f6 ,0x0 }, + {0x200f7 ,0xf000 }, + {0x20025 ,0x0 }, + {0x2002d ,0x0 }, + {0x12002d ,0x0 }, + {0x22002d ,0x0 }, + {0x200c7 ,0x21 }, + {0x1200c7 ,0x21 }, + {0x2200c7 ,0x21 }, + {0x200ca ,0x24 }, + {0x1200ca ,0x24 }, + {0x2200ca ,0x24 }, +}; + +/* ddr phy trained csr */ +struct dram_cfg_param ddr_ddrphy_trained_csr[] = { + {0x200b2 ,0x0 }, + {0x1200b2 ,0x0 }, + {0x2200b2 ,0x0 }, + {0x200cb ,0x0 }, + {0x10043 ,0x0 }, + {0x110043 ,0x0 }, + {0x210043 ,0x0 }, + {0x10143 ,0x0 }, + {0x110143 ,0x0 }, + {0x210143 ,0x0 }, + {0x11043 ,0x0 }, + {0x111043 ,0x0 }, + {0x211043 ,0x0 }, + {0x11143 ,0x0 }, + {0x111143 ,0x0 }, + {0x211143 ,0x0 }, + {0x12043 ,0x0 }, + {0x112043 ,0x0 }, + {0x212043 ,0x0 }, + {0x12143 ,0x0 }, + {0x112143 ,0x0 }, + {0x212143 ,0x0 }, + {0x13043 ,0x0 }, + {0x113043 ,0x0 }, + {0x213043 ,0x0 }, + {0x13143 ,0x0 }, + {0x113143 ,0x0 }, + {0x213143 ,0x0 }, + {0x80 ,0x0 }, + {0x100080 ,0x0 }, + {0x200080 ,0x0 }, + {0x1080 ,0x0 }, + {0x101080 ,0x0 }, + {0x201080 ,0x0 }, + {0x2080 ,0x0 }, + {0x102080 ,0x0 }, + {0x202080 ,0x0 }, + {0x3080 ,0x0 }, + {0x103080 ,0x0 }, + {0x203080 ,0x0 }, + {0x4080 ,0x0 }, + {0x104080 ,0x0 }, + {0x204080 ,0x0 }, + {0x5080 ,0x0 }, + {0x105080 ,0x0 }, + {0x205080 ,0x0 }, + {0x6080 ,0x0 }, + {0x106080 ,0x0 }, + {0x206080 ,0x0 }, + {0x7080 ,0x0 }, + {0x107080 ,0x0 }, + {0x207080 ,0x0 }, + {0x8080 ,0x0 }, + {0x108080 ,0x0 }, + {0x208080 ,0x0 }, + {0x9080 ,0x0 }, + {0x109080 ,0x0 }, + {0x209080 ,0x0 }, + {0x10080 ,0x0 }, + {0x110080 ,0x0 }, + {0x210080 ,0x0 }, + {0x10180 ,0x0 }, + {0x110180 ,0x0 }, + {0x210180 ,0x0 }, + {0x11080 ,0x0 }, + {0x111080 ,0x0 }, + {0x211080 ,0x0 }, + {0x11180 ,0x0 }, + {0x111180 ,0x0 }, + {0x211180 ,0x0 }, + {0x12080 ,0x0 }, + {0x112080 ,0x0 }, + {0x212080 ,0x0 }, + {0x12180 ,0x0 }, + {0x112180 ,0x0 }, + {0x212180 ,0x0 }, + {0x13080 ,0x0 }, + {0x113080 ,0x0 }, + {0x213080 ,0x0 }, + {0x13180 ,0x0 }, + {0x113180 ,0x0 }, + {0x213180 ,0x0 }, + {0x10081 ,0x0 }, + {0x110081 ,0x0 }, + {0x210081 ,0x0 }, + {0x10181 ,0x0 }, + {0x110181 ,0x0 }, + {0x210181 ,0x0 }, + {0x11081 ,0x0 }, + {0x111081 ,0x0 }, + {0x211081 ,0x0 }, + {0x11181 ,0x0 }, + {0x111181 ,0x0 }, + {0x211181 ,0x0 }, + {0x12081 ,0x0 }, + {0x112081 ,0x0 }, + {0x212081 ,0x0 }, + {0x12181 ,0x0 }, + {0x112181 ,0x0 }, + {0x212181 ,0x0 }, + {0x13081 ,0x0 }, + {0x113081 ,0x0 }, + {0x213081 ,0x0 }, + {0x13181 ,0x0 }, + {0x113181 ,0x0 }, + {0x213181 ,0x0 }, + {0x100d0 ,0x0 }, + {0x1100d0 ,0x0 }, + {0x2100d0 ,0x0 }, + {0x101d0 ,0x0 }, + {0x1101d0 ,0x0 }, + {0x2101d0 ,0x0 }, + {0x110d0 ,0x0 }, + {0x1110d0 ,0x0 }, + {0x2110d0 ,0x0 }, + {0x111d0 ,0x0 }, + {0x1111d0 ,0x0 }, + {0x2111d0 ,0x0 }, + {0x120d0 ,0x0 }, + {0x1120d0 ,0x0 }, + {0x2120d0 ,0x0 }, + {0x121d0 ,0x0 }, + {0x1121d0 ,0x0 }, + {0x2121d0 ,0x0 }, + {0x130d0 ,0x0 }, + {0x1130d0 ,0x0 }, + {0x2130d0 ,0x0 }, + {0x131d0 ,0x0 }, + {0x1131d0 ,0x0 }, + {0x2131d0 ,0x0 }, + {0x100d1 ,0x0 }, + {0x1100d1 ,0x0 }, + {0x2100d1 ,0x0 }, + {0x101d1 ,0x0 }, + {0x1101d1 ,0x0 }, + {0x2101d1 ,0x0 }, + {0x110d1 ,0x0 }, + {0x1110d1 ,0x0 }, + {0x2110d1 ,0x0 }, + {0x111d1 ,0x0 }, + {0x1111d1 ,0x0 }, + {0x2111d1 ,0x0 }, + {0x120d1 ,0x0 }, + {0x1120d1 ,0x0 }, + {0x2120d1 ,0x0 }, + {0x121d1 ,0x0 }, + {0x1121d1 ,0x0 }, + {0x2121d1 ,0x0 }, + {0x130d1 ,0x0 }, + {0x1130d1 ,0x0 }, + {0x2130d1 ,0x0 }, + {0x131d1 ,0x0 }, + {0x1131d1 ,0x0 }, + {0x2131d1 ,0x0 }, + {0x10068 ,0x0 }, + {0x10168 ,0x0 }, + {0x10268 ,0x0 }, + {0x10368 ,0x0 }, + {0x10468 ,0x0 }, + {0x10568 ,0x0 }, + {0x10668 ,0x0 }, + {0x10768 ,0x0 }, + {0x10868 ,0x0 }, + {0x11068 ,0x0 }, + {0x11168 ,0x0 }, + {0x11268 ,0x0 }, + {0x11368 ,0x0 }, + {0x11468 ,0x0 }, + {0x11568 ,0x0 }, + {0x11668 ,0x0 }, + {0x11768 ,0x0 }, + {0x11868 ,0x0 }, + {0x12068 ,0x0 }, + {0x12168 ,0x0 }, + {0x12268 ,0x0 }, + {0x12368 ,0x0 }, + {0x12468 ,0x0 }, + {0x12568 ,0x0 }, + {0x12668 ,0x0 }, + {0x12768 ,0x0 }, + {0x12868 ,0x0 }, + {0x13068 ,0x0 }, + {0x13168 ,0x0 }, + {0x13268 ,0x0 }, + {0x13368 ,0x0 }, + {0x13468 ,0x0 }, + {0x13568 ,0x0 }, + {0x13668 ,0x0 }, + {0x13768 ,0x0 }, + {0x13868 ,0x0 }, + {0x10069 ,0x0 }, + {0x10169 ,0x0 }, + {0x10269 ,0x0 }, + {0x10369 ,0x0 }, + {0x10469 ,0x0 }, + {0x10569 ,0x0 }, + {0x10669 ,0x0 }, + {0x10769 ,0x0 }, + {0x10869 ,0x0 }, + {0x11069 ,0x0 }, + {0x11169 ,0x0 }, + {0x11269 ,0x0 }, + {0x11369 ,0x0 }, + {0x11469 ,0x0 }, + {0x11569 ,0x0 }, + {0x11669 ,0x0 }, + {0x11769 ,0x0 }, + {0x11869 ,0x0 }, + {0x12069 ,0x0 }, + {0x12169 ,0x0 }, + {0x12269 ,0x0 }, + {0x12369 ,0x0 }, + {0x12469 ,0x0 }, + {0x12569 ,0x0 }, + {0x12669 ,0x0 }, + {0x12769 ,0x0 }, + {0x12869 ,0x0 }, + {0x13069 ,0x0 }, + {0x13169 ,0x0 }, + {0x13269 ,0x0 }, + {0x13369 ,0x0 }, + {0x13469 ,0x0 }, + {0x13569 ,0x0 }, + {0x13669 ,0x0 }, + {0x13769 ,0x0 }, + {0x13869 ,0x0 }, + {0x1008c ,0x0 }, + {0x11008c ,0x0 }, + {0x21008c ,0x0 }, + {0x1018c ,0x0 }, + {0x11018c ,0x0 }, + {0x21018c ,0x0 }, + {0x1108c ,0x0 }, + {0x11108c ,0x0 }, + {0x21108c ,0x0 }, + {0x1118c ,0x0 }, + {0x11118c ,0x0 }, + {0x21118c ,0x0 }, + {0x1208c ,0x0 }, + {0x11208c ,0x0 }, + {0x21208c ,0x0 }, + {0x1218c ,0x0 }, + {0x11218c ,0x0 }, + {0x21218c ,0x0 }, + {0x1308c ,0x0 }, + {0x11308c ,0x0 }, + {0x21308c ,0x0 }, + {0x1318c ,0x0 }, + {0x11318c ,0x0 }, + {0x21318c ,0x0 }, + {0x1008d ,0x0 }, + {0x11008d ,0x0 }, + {0x21008d ,0x0 }, + {0x1018d ,0x0 }, + {0x11018d ,0x0 }, + {0x21018d ,0x0 }, + {0x1108d ,0x0 }, + {0x11108d ,0x0 }, + {0x21108d ,0x0 }, + {0x1118d ,0x0 }, + {0x11118d ,0x0 }, + {0x21118d ,0x0 }, + {0x1208d ,0x0 }, + {0x11208d ,0x0 }, + {0x21208d ,0x0 }, + {0x1218d ,0x0 }, + {0x11218d ,0x0 }, + {0x21218d ,0x0 }, + {0x1308d ,0x0 }, + {0x11308d ,0x0 }, + {0x21308d ,0x0 }, + {0x1318d ,0x0 }, + {0x11318d ,0x0 }, + {0x21318d ,0x0 }, + {0x100c0 ,0x0 }, + {0x1100c0 ,0x0 }, + {0x2100c0 ,0x0 }, + {0x101c0 ,0x0 }, + {0x1101c0 ,0x0 }, + {0x2101c0 ,0x0 }, + {0x102c0 ,0x0 }, + {0x1102c0 ,0x0 }, + {0x2102c0 ,0x0 }, + {0x103c0 ,0x0 }, + {0x1103c0 ,0x0 }, + {0x2103c0 ,0x0 }, + {0x104c0 ,0x0 }, + {0x1104c0 ,0x0 }, + {0x2104c0 ,0x0 }, + {0x105c0 ,0x0 }, + {0x1105c0 ,0x0 }, + {0x2105c0 ,0x0 }, + {0x106c0 ,0x0 }, + {0x1106c0 ,0x0 }, + {0x2106c0 ,0x0 }, + {0x107c0 ,0x0 }, + {0x1107c0 ,0x0 }, + {0x2107c0 ,0x0 }, + {0x108c0 ,0x0 }, + {0x1108c0 ,0x0 }, + {0x2108c0 ,0x0 }, + {0x110c0 ,0x0 }, + {0x1110c0 ,0x0 }, + {0x2110c0 ,0x0 }, + {0x111c0 ,0x0 }, + {0x1111c0 ,0x0 }, + {0x2111c0 ,0x0 }, + {0x112c0 ,0x0 }, + {0x1112c0 ,0x0 }, + {0x2112c0 ,0x0 }, + {0x113c0 ,0x0 }, + {0x1113c0 ,0x0 }, + {0x2113c0 ,0x0 }, + {0x114c0 ,0x0 }, + {0x1114c0 ,0x0 }, + {0x2114c0 ,0x0 }, + {0x115c0 ,0x0 }, + {0x1115c0 ,0x0 }, + {0x2115c0 ,0x0 }, + {0x116c0 ,0x0 }, + {0x1116c0 ,0x0 }, + {0x2116c0 ,0x0 }, + {0x117c0 ,0x0 }, + {0x1117c0 ,0x0 }, + {0x2117c0 ,0x0 }, + {0x118c0 ,0x0 }, + {0x1118c0 ,0x0 }, + {0x2118c0 ,0x0 }, + {0x120c0 ,0x0 }, + {0x1120c0 ,0x0 }, + {0x2120c0 ,0x0 }, + {0x121c0 ,0x0 }, + {0x1121c0 ,0x0 }, + {0x2121c0 ,0x0 }, + {0x122c0 ,0x0 }, + {0x1122c0 ,0x0 }, + {0x2122c0 ,0x0 }, + {0x123c0 ,0x0 }, + {0x1123c0 ,0x0 }, + {0x2123c0 ,0x0 }, + {0x124c0 ,0x0 }, + {0x1124c0 ,0x0 }, + {0x2124c0 ,0x0 }, + {0x125c0 ,0x0 }, + {0x1125c0 ,0x0 }, + {0x2125c0 ,0x0 }, + {0x126c0 ,0x0 }, + {0x1126c0 ,0x0 }, + {0x2126c0 ,0x0 }, + {0x127c0 ,0x0 }, + {0x1127c0 ,0x0 }, + {0x2127c0 ,0x0 }, + {0x128c0 ,0x0 }, + {0x1128c0 ,0x0 }, + {0x2128c0 ,0x0 }, + {0x130c0 ,0x0 }, + {0x1130c0 ,0x0 }, + {0x2130c0 ,0x0 }, + {0x131c0 ,0x0 }, + {0x1131c0 ,0x0 }, + {0x2131c0 ,0x0 }, + {0x132c0 ,0x0 }, + {0x1132c0 ,0x0 }, + {0x2132c0 ,0x0 }, + {0x133c0 ,0x0 }, + {0x1133c0 ,0x0 }, + {0x2133c0 ,0x0 }, + {0x134c0 ,0x0 }, + {0x1134c0 ,0x0 }, + {0x2134c0 ,0x0 }, + {0x135c0 ,0x0 }, + {0x1135c0 ,0x0 }, + {0x2135c0 ,0x0 }, + {0x136c0 ,0x0 }, + {0x1136c0 ,0x0 }, + {0x2136c0 ,0x0 }, + {0x137c0 ,0x0 }, + {0x1137c0 ,0x0 }, + {0x2137c0 ,0x0 }, + {0x138c0 ,0x0 }, + {0x1138c0 ,0x0 }, + {0x2138c0 ,0x0 }, + {0x100c1 ,0x0 }, + {0x1100c1 ,0x0 }, + {0x2100c1 ,0x0 }, + {0x101c1 ,0x0 }, + {0x1101c1 ,0x0 }, + {0x2101c1 ,0x0 }, + {0x102c1 ,0x0 }, + {0x1102c1 ,0x0 }, + {0x2102c1 ,0x0 }, + {0x103c1 ,0x0 }, + {0x1103c1 ,0x0 }, + {0x2103c1 ,0x0 }, + {0x104c1 ,0x0 }, + {0x1104c1 ,0x0 }, + {0x2104c1 ,0x0 }, + {0x105c1 ,0x0 }, + {0x1105c1 ,0x0 }, + {0x2105c1 ,0x0 }, + {0x106c1 ,0x0 }, + {0x1106c1 ,0x0 }, + {0x2106c1 ,0x0 }, + {0x107c1 ,0x0 }, + {0x1107c1 ,0x0 }, + {0x2107c1 ,0x0 }, + {0x108c1 ,0x0 }, + {0x1108c1 ,0x0 }, + {0x2108c1 ,0x0 }, + {0x110c1 ,0x0 }, + {0x1110c1 ,0x0 }, + {0x2110c1 ,0x0 }, + {0x111c1 ,0x0 }, + {0x1111c1 ,0x0 }, + {0x2111c1 ,0x0 }, + {0x112c1 ,0x0 }, + {0x1112c1 ,0x0 }, + {0x2112c1 ,0x0 }, + {0x113c1 ,0x0 }, + {0x1113c1 ,0x0 }, + {0x2113c1 ,0x0 }, + {0x114c1 ,0x0 }, + {0x1114c1 ,0x0 }, + {0x2114c1 ,0x0 }, + {0x115c1 ,0x0 }, + {0x1115c1 ,0x0 }, + {0x2115c1 ,0x0 }, + {0x116c1 ,0x0 }, + {0x1116c1 ,0x0 }, + {0x2116c1 ,0x0 }, + {0x117c1 ,0x0 }, + {0x1117c1 ,0x0 }, + {0x2117c1 ,0x0 }, + {0x118c1 ,0x0 }, + {0x1118c1 ,0x0 }, + {0x2118c1 ,0x0 }, + {0x120c1 ,0x0 }, + {0x1120c1 ,0x0 }, + {0x2120c1 ,0x0 }, + {0x121c1 ,0x0 }, + {0x1121c1 ,0x0 }, + {0x2121c1 ,0x0 }, + {0x122c1 ,0x0 }, + {0x1122c1 ,0x0 }, + {0x2122c1 ,0x0 }, + {0x123c1 ,0x0 }, + {0x1123c1 ,0x0 }, + {0x2123c1 ,0x0 }, + {0x124c1 ,0x0 }, + {0x1124c1 ,0x0 }, + {0x2124c1 ,0x0 }, + {0x125c1 ,0x0 }, + {0x1125c1 ,0x0 }, + {0x2125c1 ,0x0 }, + {0x126c1 ,0x0 }, + {0x1126c1 ,0x0 }, + {0x2126c1 ,0x0 }, + {0x127c1 ,0x0 }, + {0x1127c1 ,0x0 }, + {0x2127c1 ,0x0 }, + {0x128c1 ,0x0 }, + {0x1128c1 ,0x0 }, + {0x2128c1 ,0x0 }, + {0x130c1 ,0x0 }, + {0x1130c1 ,0x0 }, + {0x2130c1 ,0x0 }, + {0x131c1 ,0x0 }, + {0x1131c1 ,0x0 }, + {0x2131c1 ,0x0 }, + {0x132c1 ,0x0 }, + {0x1132c1 ,0x0 }, + {0x2132c1 ,0x0 }, + {0x133c1 ,0x0 }, + {0x1133c1 ,0x0 }, + {0x2133c1 ,0x0 }, + {0x134c1 ,0x0 }, + {0x1134c1 ,0x0 }, + {0x2134c1 ,0x0 }, + {0x135c1 ,0x0 }, + {0x1135c1 ,0x0 }, + {0x2135c1 ,0x0 }, + {0x136c1 ,0x0 }, + {0x1136c1 ,0x0 }, + {0x2136c1 ,0x0 }, + {0x137c1 ,0x0 }, + {0x1137c1 ,0x0 }, + {0x2137c1 ,0x0 }, + {0x138c1 ,0x0 }, + {0x1138c1 ,0x0 }, + {0x2138c1 ,0x0 }, + {0x10020 ,0x0 }, + {0x110020 ,0x0 }, + {0x210020 ,0x0 }, + {0x11020 ,0x0 }, + {0x111020 ,0x0 }, + {0x211020 ,0x0 }, + {0x12020 ,0x0 }, + {0x112020 ,0x0 }, + {0x212020 ,0x0 }, + {0x13020 ,0x0 }, + {0x113020 ,0x0 }, + {0x213020 ,0x0 }, + {0x20072 ,0x0 }, + {0x20073 ,0x0 }, + {0x20074 ,0x0 }, + {0x100aa ,0x0 }, + {0x110aa ,0x0 }, + {0x120aa ,0x0 }, + {0x130aa ,0x0 }, + {0x20010 ,0x0 }, + {0x120010 ,0x0 }, + {0x220010 ,0x0 }, + {0x20011 ,0x0 }, + {0x120011 ,0x0 }, + {0x220011 ,0x0 }, + {0x100ae ,0x0 }, + {0x1100ae ,0x0 }, + {0x2100ae ,0x0 }, + {0x100af ,0x0 }, + {0x1100af ,0x0 }, + {0x2100af ,0x0 }, + {0x110ae ,0x0 }, + {0x1110ae ,0x0 }, + {0x2110ae ,0x0 }, + {0x110af ,0x0 }, + {0x1110af ,0x0 }, + {0x2110af ,0x0 }, + {0x120ae ,0x0 }, + {0x1120ae ,0x0 }, + {0x2120ae ,0x0 }, + {0x120af ,0x0 }, + {0x1120af ,0x0 }, + {0x2120af ,0x0 }, + {0x130ae ,0x0 }, + {0x1130ae ,0x0 }, + {0x2130ae ,0x0 }, + {0x130af ,0x0 }, + {0x1130af ,0x0 }, + {0x2130af ,0x0 }, + {0x20020 ,0x0 }, + {0x120020 ,0x0 }, + {0x220020 ,0x0 }, + {0x100a0 ,0x0 }, + {0x100a1 ,0x0 }, + {0x100a2 ,0x0 }, + {0x100a3 ,0x0 }, + {0x100a4 ,0x0 }, + {0x100a5 ,0x0 }, + {0x100a6 ,0x0 }, + {0x100a7 ,0x0 }, + {0x110a0 ,0x0 }, + {0x110a1 ,0x0 }, + {0x110a2 ,0x0 }, + {0x110a3 ,0x0 }, + {0x110a4 ,0x0 }, + {0x110a5 ,0x0 }, + {0x110a6 ,0x0 }, + {0x110a7 ,0x0 }, + {0x120a0 ,0x0 }, + {0x120a1 ,0x0 }, + {0x120a2 ,0x0 }, + {0x120a3 ,0x0 }, + {0x120a4 ,0x0 }, + {0x120a5 ,0x0 }, + {0x120a6 ,0x0 }, + {0x120a7 ,0x0 }, + {0x130a0 ,0x0 }, + {0x130a1 ,0x0 }, + {0x130a2 ,0x0 }, + {0x130a3 ,0x0 }, + {0x130a4 ,0x0 }, + {0x130a5 ,0x0 }, + {0x130a6 ,0x0 }, + {0x130a7 ,0x0 }, + {0x2007c ,0x0 }, + {0x12007c ,0x0 }, + {0x22007c ,0x0 }, + {0x2007d ,0x0 }, + {0x12007d ,0x0 }, + {0x22007d ,0x0 }, + {0x400fd ,0x0 }, + {0x400c0 ,0x0 }, + {0x90201 ,0x0 }, + {0x190201 ,0x0 }, + {0x290201 ,0x0 }, + {0x90202 ,0x0 }, + {0x190202 ,0x0 }, + {0x290202 ,0x0 }, + {0x90203 ,0x0 }, + {0x190203 ,0x0 }, + {0x290203 ,0x0 }, + {0x90204 ,0x0 }, + {0x190204 ,0x0 }, + {0x290204 ,0x0 }, + {0x90205 ,0x0 }, + {0x190205 ,0x0 }, + {0x290205 ,0x0 }, + {0x90206 ,0x0 }, + {0x190206 ,0x0 }, + {0x290206 ,0x0 }, + {0x90207 ,0x0 }, + {0x190207 ,0x0 }, + {0x290207 ,0x0 }, + {0x90208 ,0x0 }, + {0x190208 ,0x0 }, + {0x290208 ,0x0 }, + {0x10062 ,0x0 }, + {0x10162 ,0x0 }, + {0x10262 ,0x0 }, + {0x10362 ,0x0 }, + {0x10462 ,0x0 }, + {0x10562 ,0x0 }, + {0x10662 ,0x0 }, + {0x10762 ,0x0 }, + {0x10862 ,0x0 }, + {0x11062 ,0x0 }, + {0x11162 ,0x0 }, + {0x11262 ,0x0 }, + {0x11362 ,0x0 }, + {0x11462 ,0x0 }, + {0x11562 ,0x0 }, + {0x11662 ,0x0 }, + {0x11762 ,0x0 }, + {0x11862 ,0x0 }, + {0x12062 ,0x0 }, + {0x12162 ,0x0 }, + {0x12262 ,0x0 }, + {0x12362 ,0x0 }, + {0x12462 ,0x0 }, + {0x12562 ,0x0 }, + {0x12662 ,0x0 }, + {0x12762 ,0x0 }, + {0x12862 ,0x0 }, + {0x13062 ,0x0 }, + {0x13162 ,0x0 }, + {0x13262 ,0x0 }, + {0x13362 ,0x0 }, + {0x13462 ,0x0 }, + {0x13562 ,0x0 }, + {0x13662 ,0x0 }, + {0x13762 ,0x0 }, + {0x13862 ,0x0 }, + {0x20077 ,0x0 }, + {0x10001 ,0x0 }, + {0x11001 ,0x0 }, + {0x12001 ,0x0 }, + {0x13001 ,0x0 }, + {0x10040 ,0x0 }, + {0x10140 ,0x0 }, + {0x10240 ,0x0 }, + {0x10340 ,0x0 }, + {0x10440 ,0x0 }, + {0x10540 ,0x0 }, + {0x10640 ,0x0 }, + {0x10740 ,0x0 }, + {0x10840 ,0x0 }, + {0x10030 ,0x0 }, + {0x10130 ,0x0 }, + {0x10230 ,0x0 }, + {0x10330 ,0x0 }, + {0x10430 ,0x0 }, + {0x10530 ,0x0 }, + {0x10630 ,0x0 }, + {0x10730 ,0x0 }, + {0x10830 ,0x0 }, + {0x11040 ,0x0 }, + {0x11140 ,0x0 }, + {0x11240 ,0x0 }, + {0x11340 ,0x0 }, + {0x11440 ,0x0 }, + {0x11540 ,0x0 }, + {0x11640 ,0x0 }, + {0x11740 ,0x0 }, + {0x11840 ,0x0 }, + {0x11030 ,0x0 }, + {0x11130 ,0x0 }, + {0x11230 ,0x0 }, + {0x11330 ,0x0 }, + {0x11430 ,0x0 }, + {0x11530 ,0x0 }, + {0x11630 ,0x0 }, + {0x11730 ,0x0 }, + {0x11830 ,0x0 }, + {0x12040 ,0x0 }, + {0x12140 ,0x0 }, + {0x12240 ,0x0 }, + {0x12340 ,0x0 }, + {0x12440 ,0x0 }, + {0x12540 ,0x0 }, + {0x12640 ,0x0 }, + {0x12740 ,0x0 }, + {0x12840 ,0x0 }, + {0x12030 ,0x0 }, + {0x12130 ,0x0 }, + {0x12230 ,0x0 }, + {0x12330 ,0x0 }, + {0x12430 ,0x0 }, + {0x12530 ,0x0 }, + {0x12630 ,0x0 }, + {0x12730 ,0x0 }, + {0x12830 ,0x0 }, + {0x13040 ,0x0 }, + {0x13140 ,0x0 }, + {0x13240 ,0x0 }, + {0x13340 ,0x0 }, + {0x13440 ,0x0 }, + {0x13540 ,0x0 }, + {0x13640 ,0x0 }, + {0x13740 ,0x0 }, + {0x13840 ,0x0 }, + {0x13030 ,0x0 }, + {0x13130 ,0x0 }, + {0x13230 ,0x0 }, + {0x13330 ,0x0 }, + {0x13430 ,0x0 }, + {0x13530 ,0x0 }, + {0x13630 ,0x0 }, + {0x13730 ,0x0 }, + {0x13830 ,0x0 }, +}; +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_cfg[] = { + {0xd0000 ,0x0 }, + {0x54003 ,0xbb8 }, + {0x54004 ,0x2 }, + {0x54005 ,0x2228 }, + {0x54006 ,0x11 }, + {0x54008 ,0x131f }, + {0x54009 ,0xc8 }, + {0x5400b ,0x2 }, + {0x5400d ,0x100 }, + {0x54012 ,0x310 }, + {0x54019 ,0x2dd4 }, + {0x5401a ,0x31 }, + {0x5401b ,0x4d66 }, + {0x5401c ,0x4d00 }, + {0x5401e ,0x16 }, + {0x5401f ,0x2dd4 }, + {0x54020 ,0x31 }, + {0x54021 ,0x4d66 }, + {0x54022 ,0x4d00 }, + {0x54024 ,0x16 }, + {0x5402b ,0x1000 }, + {0x5402c ,0x3 }, + {0x54032 ,0xd400 }, + {0x54033 ,0x312d }, + {0x54034 ,0x6600 }, + {0x54035 ,0x4d }, + {0x54036 ,0x4d }, + {0x54037 ,0x1600 }, + {0x54038 ,0xd400 }, + {0x54039 ,0x312d }, + {0x5403a ,0x6600 }, + {0x5403b ,0x4d }, + {0x5403c ,0x4d }, + {0x5403d ,0x1600 }, + {0xd0000 ,0x1 }, +}; + + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp1_cfg[] = { + {0xd0000 ,0x0 }, + {0x54002 ,0x101 }, + {0x54003 ,0x190 }, + {0x54004 ,0x2 }, + {0x54005 ,0x2228 }, + {0x54006 ,0x11 }, + {0x54008 ,0x121f }, + {0x54009 ,0xc8 }, + {0x5400b ,0x2 }, + {0x5400d ,0x100 }, + {0x54012 ,0x310 }, + {0x54019 ,0x84 }, + {0x5401a ,0x31 }, + {0x5401b ,0x4d66 }, + {0x5401c ,0x4d00 }, + {0x5401e ,0x16 }, + {0x5401f ,0x84 }, + {0x54020 ,0x31 }, + {0x54021 ,0x4d66 }, + {0x54022 ,0x4d00 }, + {0x54024 ,0x16 }, + {0x5402b ,0x1000 }, + {0x5402c ,0x3 }, + {0x54032 ,0x8400 }, + {0x54033 ,0x3100 }, + {0x54034 ,0x6600 }, + {0x54035 ,0x4d }, + {0x54036 ,0x4d }, + {0x54037 ,0x1600 }, + {0x54038 ,0x8400 }, + {0x54039 ,0x3100 }, + {0x5403a ,0x6600 }, + {0x5403b ,0x4d }, + {0x5403c ,0x4d }, + {0x5403d ,0x1600 }, + {0xd0000 ,0x1 }, +}; + + +/* P2 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp2_cfg[] = { + {0xd0000 ,0x0 }, + {0x54002 ,0x102 }, + {0x54003 ,0x64 }, + {0x54004 ,0x2 }, + {0x54005 ,0x2228 }, + {0x54006 ,0x11 }, + {0x54008 ,0x121f }, + {0x54009 ,0xc8 }, + {0x5400b ,0x2 }, + {0x5400d ,0x100 }, + {0x54012 ,0x310 }, + {0x54019 ,0x84 }, + {0x5401a ,0x31 }, + {0x5401b ,0x4d66 }, + {0x5401c ,0x4d00 }, + {0x5401e ,0x16 }, + {0x5401f ,0x84 }, + {0x54020 ,0x31 }, + {0x54021 ,0x4d66 }, + {0x54022 ,0x4d00 }, + {0x54024 ,0x16 }, + {0x5402b ,0x1000 }, + {0x5402c ,0x3 }, + {0x54032 ,0x8400 }, + {0x54033 ,0x3100 }, + {0x54034 ,0x6600 }, + {0x54035 ,0x4d }, + {0x54036 ,0x4d }, + {0x54037 ,0x1600 }, + {0x54038 ,0x8400 }, + {0x54039 ,0x3100 }, + {0x5403a ,0x6600 }, + {0x5403b ,0x4d }, + {0x5403c ,0x4d }, + {0x5403d ,0x1600 }, + {0xd0000 ,0x1 }, +}; + + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_2d_cfg[] = { + {0xd0000 ,0x0 }, + {0x54003 ,0xbb8 }, + {0x54004 ,0x2 }, + {0x54005 ,0x2228 }, + {0x54006 ,0x11 }, + {0x54008 ,0x61 }, + {0x54009 ,0xc8 }, + {0x5400b ,0x2 }, + {0x5400f ,0x100 }, + {0x54010 ,0x1f7f }, + {0x54012 ,0x310 }, + {0x54019 ,0x2dd4 }, + {0x5401a ,0x31 }, + {0x5401b ,0x4d66 }, + {0x5401c ,0x4d00 }, + {0x5401e ,0x16 }, + {0x5401f ,0x2dd4 }, + {0x54020 ,0x31 }, + {0x54021 ,0x4d66 }, + {0x54022 ,0x4d00 }, + {0x54024 ,0x16 }, + {0x5402b ,0x1000 }, + {0x5402c ,0x3 }, + {0x54032 ,0xd400 }, + {0x54033 ,0x312d }, + {0x54034 ,0x6600 }, + {0x54035 ,0x4d }, + {0x54036 ,0x4d }, + {0x54037 ,0x1600 }, + {0x54038 ,0xd400 }, + {0x54039 ,0x312d }, + {0x5403a ,0x6600 }, + {0x5403b ,0x4d }, + {0x5403c ,0x4d }, + {0x5403d ,0x1600 }, + {0xd0000 ,0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param ddr_phy_pie[] = { + {0xd0000 ,0x0 }, + {0x90000 ,0x10 }, + {0x90001 ,0x400 }, + {0x90002 ,0x10e }, + {0x90003 ,0x0 }, + {0x90004 ,0x0 }, + {0x90005 ,0x8 }, + {0x90029 ,0xb }, + {0x9002a ,0x480 }, + {0x9002b ,0x109 }, + {0x9002c ,0x8 }, + {0x9002d ,0x448 }, + {0x9002e ,0x139 }, + {0x9002f ,0x8 }, + {0x90030 ,0x478 }, + {0x90031 ,0x109 }, + {0x90032 ,0x0 }, + {0x90033 ,0xe8 }, + {0x90034 ,0x109 }, + {0x90035 ,0x2 }, + {0x90036 ,0x10 }, + {0x90037 ,0x139 }, + {0x90038 ,0xf }, + {0x90039 ,0x7c0 }, + {0x9003a ,0x139 }, + {0x9003b ,0x44 }, + {0x9003c ,0x630 }, + {0x9003d ,0x159 }, + {0x9003e ,0x14f }, + {0x9003f ,0x630 }, + {0x90040 ,0x159 }, + {0x90041 ,0x47 }, + {0x90042 ,0x630 }, + {0x90043 ,0x149 }, + {0x90044 ,0x4f }, + {0x90045 ,0x630 }, + {0x90046 ,0x179 }, + {0x90047 ,0x8 }, + {0x90048 ,0xe0 }, + {0x90049 ,0x109 }, + {0x9004a ,0x0 }, + {0x9004b ,0x7c8 }, + {0x9004c ,0x109 }, + {0x9004d ,0x0 }, + {0x9004e ,0x1 }, + {0x9004f ,0x8 }, + {0x90050 ,0x0 }, + {0x90051 ,0x45a }, + {0x90052 ,0x9 }, + {0x90053 ,0x0 }, + {0x90054 ,0x448 }, + {0x90055 ,0x109 }, + {0x90056 ,0x40 }, + {0x90057 ,0x630 }, + {0x90058 ,0x179 }, + {0x90059 ,0x1 }, + {0x9005a ,0x618 }, + {0x9005b ,0x109 }, + {0x9005c ,0x40c0 }, + {0x9005d ,0x630 }, + {0x9005e ,0x149 }, + {0x9005f ,0x8 }, + {0x90060 ,0x4 }, + {0x90061 ,0x48 }, + {0x90062 ,0x4040 }, + {0x90063 ,0x630 }, + {0x90064 ,0x149 }, + {0x90065 ,0x0 }, + {0x90066 ,0x4 }, + {0x90067 ,0x48 }, + {0x90068 ,0x40 }, + {0x90069 ,0x630 }, + {0x9006a ,0x149 }, + {0x9006b ,0x10 }, + {0x9006c ,0x4 }, + {0x9006d ,0x18 }, + {0x9006e ,0x0 }, + {0x9006f ,0x4 }, + {0x90070 ,0x78 }, + {0x90071 ,0x549 }, + {0x90072 ,0x630 }, + {0x90073 ,0x159 }, + {0x90074 ,0xd49 }, + {0x90075 ,0x630 }, + {0x90076 ,0x159 }, + {0x90077 ,0x94a }, + {0x90078 ,0x630 }, + {0x90079 ,0x159 }, + {0x9007a ,0x441 }, + {0x9007b ,0x630 }, + {0x9007c ,0x149 }, + {0x9007d ,0x42 }, + {0x9007e ,0x630 }, + {0x9007f ,0x149 }, + {0x90080 ,0x1 }, + {0x90081 ,0x630 }, + {0x90082 ,0x149 }, + {0x90083 ,0x0 }, + {0x90084 ,0xe0 }, + {0x90085 ,0x109 }, + {0x90086 ,0xa }, + {0x90087 ,0x10 }, + {0x90088 ,0x109 }, + {0x90089 ,0x9 }, + {0x9008a ,0x3c0 }, + {0x9008b ,0x149 }, + {0x9008c ,0x9 }, + {0x9008d ,0x3c0 }, + {0x9008e ,0x159 }, + {0x9008f ,0x18 }, + {0x90090 ,0x10 }, + {0x90091 ,0x109 }, + {0x90092 ,0x0 }, + {0x90093 ,0x3c0 }, + {0x90094 ,0x109 }, + {0x90095 ,0x18 }, + {0x90096 ,0x4 }, + {0x90097 ,0x48 }, + {0x90098 ,0x18 }, + {0x90099 ,0x4 }, + {0x9009a ,0x58 }, + {0x9009b ,0xa }, + {0x9009c ,0x10 }, + {0x9009d ,0x109 }, + {0x9009e ,0x2 }, + {0x9009f ,0x10 }, + {0x900a0 ,0x109 }, + {0x900a1 ,0x5 }, + {0x900a2 ,0x7c0 }, + {0x900a3 ,0x109 }, + {0x900a4 ,0x10 }, + {0x900a5 ,0x10 }, + {0x900a6 ,0x109 }, + {0x40000 ,0x811 }, + {0x40020 ,0x880 }, + {0x40040 ,0x0 }, + {0x40060 ,0x0 }, + {0x40001 ,0x4008 }, + {0x40021 ,0x83 }, + {0x40041 ,0x4f }, + {0x40061 ,0x0 }, + {0x40002 ,0x4040 }, + {0x40022 ,0x83 }, + {0x40042 ,0x51 }, + {0x40062 ,0x0 }, + {0x40003 ,0x811 }, + {0x40023 ,0x880 }, + {0x40043 ,0x0 }, + {0x40063 ,0x0 }, + {0x40004 ,0x720 }, + {0x40024 ,0xf }, + {0x40044 ,0x1740 }, + {0x40064 ,0x0 }, + {0x40005 ,0x16 }, + {0x40025 ,0x83 }, + {0x40045 ,0x4b }, + {0x40065 ,0x0 }, + {0x40006 ,0x716 }, + {0x40026 ,0xf }, + {0x40046 ,0x2001 }, + {0x40066 ,0x0 }, + {0x40007 ,0x716 }, + {0x40027 ,0xf }, + {0x40047 ,0x2800 }, + {0x40067 ,0x0 }, + {0x40008 ,0x716 }, + {0x40028 ,0xf }, + {0x40048 ,0xf00 }, + {0x40068 ,0x0 }, + {0x40009 ,0x720 }, + {0x40029 ,0xf }, + {0x40049 ,0x1400 }, + {0x40069 ,0x0 }, + {0x4000a ,0xe08 }, + {0x4002a ,0xc15 }, + {0x4004a ,0x0 }, + {0x4006a ,0x0 }, + {0x4000b ,0x623 }, + {0x4002b ,0x15 }, + {0x4004b ,0x0 }, + {0x4006b ,0x0 }, + {0x4000c ,0x4028 }, + {0x4002c ,0x80 }, + {0x4004c ,0x0 }, + {0x4006c ,0x0 }, + {0x4000d ,0xe08 }, + {0x4002d ,0xc1a }, + {0x4004d ,0x0 }, + {0x4006d ,0x0 }, + {0x4000e ,0x623 }, + {0x4002e ,0x1a }, + {0x4004e ,0x0 }, + {0x4006e ,0x0 }, + {0x4000f ,0x4040 }, + {0x4002f ,0x80 }, + {0x4004f ,0x0 }, + {0x4006f ,0x0 }, + {0x40010 ,0x2604 }, + {0x40030 ,0x15 }, + {0x40050 ,0x0 }, + {0x40070 ,0x0 }, + {0x40011 ,0x708 }, + {0x40031 ,0x5 }, + {0x40051 ,0x0 }, + {0x40071 ,0x2002 }, + {0x40012 ,0x8 }, + {0x40032 ,0x80 }, + {0x40052 ,0x0 }, + {0x40072 ,0x0 }, + {0x40013 ,0x2604 }, + {0x40033 ,0x1a }, + {0x40053 ,0x0 }, + {0x40073 ,0x0 }, + {0x40014 ,0x708 }, + {0x40034 ,0xa }, + {0x40054 ,0x0 }, + {0x40074 ,0x2002 }, + {0x40015 ,0x4040 }, + {0x40035 ,0x80 }, + {0x40055 ,0x0 }, + {0x40075 ,0x0 }, + {0x40016 ,0x60a }, + {0x40036 ,0x15 }, + {0x40056 ,0x1200 }, + {0x40076 ,0x0 }, + {0x40017 ,0x61a }, + {0x40037 ,0x15 }, + {0x40057 ,0x1300 }, + {0x40077 ,0x0 }, + {0x40018 ,0x60a }, + {0x40038 ,0x1a }, + {0x40058 ,0x1200 }, + {0x40078 ,0x0 }, + {0x40019 ,0x642 }, + {0x40039 ,0x1a }, + {0x40059 ,0x1300 }, + {0x40079 ,0x0 }, + {0x4001a ,0x4808 }, + {0x4003a ,0x880 }, + {0x4005a ,0x0 }, + {0x4007a ,0x0 }, + {0x900a7 ,0x0 }, + {0x900a8 ,0x790 }, + {0x900a9 ,0x11a }, + {0x900aa ,0x8 }, + {0x900ab ,0x7aa }, + {0x900ac ,0x2a }, + {0x900ad ,0x10 }, + {0x900ae ,0x7b2 }, + {0x900af ,0x2a }, + {0x900b0 ,0x0 }, + {0x900b1 ,0x7c8 }, + {0x900b2 ,0x109 }, + {0x900b3 ,0x10 }, + {0x900b4 ,0x2a8 }, + {0x900b5 ,0x129 }, + {0x900b6 ,0x8 }, + {0x900b7 ,0x370 }, + {0x900b8 ,0x129 }, + {0x900b9 ,0xa }, + {0x900ba ,0x3c8 }, + {0x900bb ,0x1a9 }, + {0x900bc ,0xc }, + {0x900bd ,0x408 }, + {0x900be ,0x199 }, + {0x900bf ,0x14 }, + {0x900c0 ,0x790 }, + {0x900c1 ,0x11a }, + {0x900c2 ,0x8 }, + {0x900c3 ,0x4 }, + {0x900c4 ,0x18 }, + {0x900c5 ,0xe }, + {0x900c6 ,0x408 }, + {0x900c7 ,0x199 }, + {0x900c8 ,0x8 }, + {0x900c9 ,0x8568 }, + {0x900ca ,0x108 }, + {0x900cb ,0x18 }, + {0x900cc ,0x790 }, + {0x900cd ,0x16a }, + {0x900ce ,0x8 }, + {0x900cf ,0x1d8 }, + {0x900d0 ,0x169 }, + {0x900d1 ,0x10 }, + {0x900d2 ,0x8558 }, + {0x900d3 ,0x168 }, + {0x900d4 ,0x70 }, + {0x900d5 ,0x788 }, + {0x900d6 ,0x16a }, + {0x900d7 ,0x1ff8 }, + {0x900d8 ,0x85a8 }, + {0x900d9 ,0x1e8 }, + {0x900da ,0x50 }, + {0x900db ,0x798 }, + {0x900dc ,0x16a }, + {0x900dd ,0x60 }, + {0x900de ,0x7a0 }, + {0x900df ,0x16a }, + {0x900e0 ,0x8 }, + {0x900e1 ,0x8310 }, + {0x900e2 ,0x168 }, + {0x900e3 ,0x8 }, + {0x900e4 ,0xa310 }, + {0x900e5 ,0x168 }, + {0x900e6 ,0xa }, + {0x900e7 ,0x408 }, + {0x900e8 ,0x169 }, + {0x900e9 ,0x6e }, + {0x900ea ,0x0 }, + {0x900eb ,0x68 }, + {0x900ec ,0x0 }, + {0x900ed ,0x408 }, + {0x900ee ,0x169 }, + {0x900ef ,0x0 }, + {0x900f0 ,0x8310 }, + {0x900f1 ,0x168 }, + {0x900f2 ,0x0 }, + {0x900f3 ,0xa310 }, + {0x900f4 ,0x168 }, + {0x900f5 ,0x1ff8 }, + {0x900f6 ,0x85a8 }, + {0x900f7 ,0x1e8 }, + {0x900f8 ,0x68 }, + {0x900f9 ,0x798 }, + {0x900fa ,0x16a }, + {0x900fb ,0x78 }, + {0x900fc ,0x7a0 }, + {0x900fd ,0x16a }, + {0x900fe ,0x68 }, + {0x900ff ,0x790 }, + {0x90100 ,0x16a }, + {0x90101 ,0x8 }, + {0x90102 ,0x8b10 }, + {0x90103 ,0x168 }, + {0x90104 ,0x8 }, + {0x90105 ,0xab10 }, + {0x90106 ,0x168 }, + {0x90107 ,0xa }, + {0x90108 ,0x408 }, + {0x90109 ,0x169 }, + {0x9010a ,0x58 }, + {0x9010b ,0x0 }, + {0x9010c ,0x68 }, + {0x9010d ,0x0 }, + {0x9010e ,0x408 }, + {0x9010f ,0x169 }, + {0x90110 ,0x0 }, + {0x90111 ,0x8b10 }, + {0x90112 ,0x168 }, + {0x90113 ,0x0 }, + {0x90114 ,0xab10 }, + {0x90115 ,0x168 }, + {0x90116 ,0x0 }, + {0x90117 ,0x1d8 }, + {0x90118 ,0x169 }, + {0x90119 ,0x80 }, + {0x9011a ,0x790 }, + {0x9011b ,0x16a }, + {0x9011c ,0x18 }, + {0x9011d ,0x7aa }, + {0x9011e ,0x6a }, + {0x9011f ,0xa }, + {0x90120 ,0x0 }, + {0x90121 ,0x1e9 }, + {0x90122 ,0x8 }, + {0x90123 ,0x8080 }, + {0x90124 ,0x108 }, + {0x90125 ,0xf }, + {0x90126 ,0x408 }, + {0x90127 ,0x169 }, + {0x90128 ,0xc }, + {0x90129 ,0x0 }, + {0x9012a ,0x68 }, + {0x9012b ,0x9 }, + {0x9012c ,0x0 }, + {0x9012d ,0x1a9 }, + {0x9012e ,0x0 }, + {0x9012f ,0x408 }, + {0x90130 ,0x169 }, + {0x90131 ,0x0 }, + {0x90132 ,0x8080 }, + {0x90133 ,0x108 }, + {0x90134 ,0x8 }, + {0x90135 ,0x7aa }, + {0x90136 ,0x6a }, + {0x90137 ,0x0 }, + {0x90138 ,0x8568 }, + {0x90139 ,0x108 }, + {0x9013a ,0xb7 }, + {0x9013b ,0x790 }, + {0x9013c ,0x16a }, + {0x9013d ,0x1f }, + {0x9013e ,0x0 }, + {0x9013f ,0x68 }, + {0x90140 ,0x8 }, + {0x90141 ,0x8558 }, + {0x90142 ,0x168 }, + {0x90143 ,0xf }, + {0x90144 ,0x408 }, + {0x90145 ,0x169 }, + {0x90146 ,0xc }, + {0x90147 ,0x0 }, + {0x90148 ,0x68 }, + {0x90149 ,0x0 }, + {0x9014a ,0x408 }, + {0x9014b ,0x169 }, + {0x9014c ,0x0 }, + {0x9014d ,0x8558 }, + {0x9014e ,0x168 }, + {0x9014f ,0x8 }, + {0x90150 ,0x3c8 }, + {0x90151 ,0x1a9 }, + {0x90152 ,0x3 }, + {0x90153 ,0x370 }, + {0x90154 ,0x129 }, + {0x90155 ,0x20 }, + {0x90156 ,0x2aa }, + {0x90157 ,0x9 }, + {0x90158 ,0x0 }, + {0x90159 ,0x400 }, + {0x9015a ,0x10e }, + {0x9015b ,0x8 }, + {0x9015c ,0xe8 }, + {0x9015d ,0x109 }, + {0x9015e ,0x0 }, + {0x9015f ,0x8140 }, + {0x90160 ,0x10c }, + {0x90161 ,0x10 }, + {0x90162 ,0x8138 }, + {0x90163 ,0x10c }, + {0x90164 ,0x8 }, + {0x90165 ,0x7c8 }, + {0x90166 ,0x101 }, + {0x90167 ,0x8 }, + {0x90168 ,0x0 }, + {0x90169 ,0x8 }, + {0x9016a ,0x8 }, + {0x9016b ,0x448 }, + {0x9016c ,0x109 }, + {0x9016d ,0xf }, + {0x9016e ,0x7c0 }, + {0x9016f ,0x109 }, + {0x90170 ,0x0 }, + {0x90171 ,0xe8 }, + {0x90172 ,0x109 }, + {0x90173 ,0x47 }, + {0x90174 ,0x630 }, + {0x90175 ,0x109 }, + {0x90176 ,0x8 }, + {0x90177 ,0x618 }, + {0x90178 ,0x109 }, + {0x90179 ,0x8 }, + {0x9017a ,0xe0 }, + {0x9017b ,0x109 }, + {0x9017c ,0x0 }, + {0x9017d ,0x7c8 }, + {0x9017e ,0x109 }, + {0x9017f ,0x8 }, + {0x90180 ,0x8140 }, + {0x90181 ,0x10c }, + {0x90182 ,0x0 }, + {0x90183 ,0x1 }, + {0x90184 ,0x8 }, + {0x90185 ,0x8 }, + {0x90186 ,0x4 }, + {0x90187 ,0x8 }, + {0x90188 ,0x8 }, + {0x90189 ,0x7c8 }, + {0x9018a ,0x101 }, + {0x90006 ,0x0 }, + {0x90007 ,0x0 }, + {0x90008 ,0x8 }, + {0x90009 ,0x0 }, + {0x9000a ,0x0 }, + {0x9000b ,0x0 }, + {0xd00e7 ,0x400 }, + {0x90017 ,0x0 }, + {0x9001f ,0x2a }, + {0x90026 ,0x6a }, + {0x400d0 ,0x0 }, + {0x400d1 ,0x101 }, + {0x400d2 ,0x105 }, + {0x400d3 ,0x107 }, + {0x400d4 ,0x10f }, + {0x400d5 ,0x202 }, + {0x400d6 ,0x20a }, + {0x400d7 ,0x20b }, + {0x2003a ,0x2 }, + {0x2000b ,0x5d }, + {0x2000c ,0xbb }, + {0x2000d ,0x753 }, + {0x2000e ,0x2c }, + {0x12000b ,0xc }, + {0x12000c ,0x19 }, + {0x12000d ,0xfa }, + {0x12000e ,0x10 }, + {0x22000b ,0x3 }, + {0x22000c ,0x6 }, + {0x22000d ,0x3e }, + {0x22000e ,0x10 }, + {0x9000c ,0x0 }, + {0x9000d ,0x173 }, + {0x9000e ,0x60 }, + {0x9000f ,0x6110 }, + {0x90010 ,0x2152 }, + {0x90011 ,0xdfbd }, + {0x90012 ,0x60 }, + {0x90013 ,0x6152 }, + {0x20010 ,0x5a }, + {0x20011 ,0x3 }, + {0x120010 ,0x5a }, + {0x120011 ,0x3 }, + {0x220010 ,0x5a }, + {0x220011 ,0x3 }, + {0x40080 ,0xe0 }, + {0x40081 ,0x12 }, + {0x40082 ,0xe0 }, + {0x40083 ,0x12 }, + {0x40084 ,0xe0 }, + {0x40085 ,0x12 }, + {0x140080 ,0xe0 }, + {0x140081 ,0x12 }, + {0x140082 ,0xe0 }, + {0x140083 ,0x12 }, + {0x140084 ,0xe0 }, + {0x140085 ,0x12 }, + {0x240080 ,0xe0 }, + {0x240081 ,0x12 }, + {0x240082 ,0xe0 }, + {0x240083 ,0x12 }, + {0x240084 ,0xe0 }, + {0x240085 ,0x12 }, + {0x400fd ,0xf }, + {0x10011 ,0x1 }, + {0x10012 ,0x1 }, + {0x10013 ,0x180 }, + {0x10018 ,0x1 }, + {0x10002 ,0x6209 }, + {0x100b2 ,0x1 }, + {0x101b4 ,0x1 }, + {0x102b4 ,0x1 }, + {0x103b4 ,0x1 }, + {0x104b4 ,0x1 }, + {0x105b4 ,0x1 }, + {0x106b4 ,0x1 }, + {0x107b4 ,0x1 }, + {0x108b4 ,0x1 }, + {0x11011 ,0x1 }, + {0x11012 ,0x1 }, + {0x11013 ,0x180 }, + {0x11018 ,0x1 }, + {0x11002 ,0x6209 }, + {0x110b2 ,0x1 }, + {0x111b4 ,0x1 }, + {0x112b4 ,0x1 }, + {0x113b4 ,0x1 }, + {0x114b4 ,0x1 }, + {0x115b4 ,0x1 }, + {0x116b4 ,0x1 }, + {0x117b4 ,0x1 }, + {0x118b4 ,0x1 }, + {0x12011 ,0x1 }, + {0x12012 ,0x1 }, + {0x12013 ,0x180 }, + {0x12018 ,0x1 }, + {0x12002 ,0x6209 }, + {0x120b2 ,0x1 }, + {0x121b4 ,0x1 }, + {0x122b4 ,0x1 }, + {0x123b4 ,0x1 }, + {0x124b4 ,0x1 }, + {0x125b4 ,0x1 }, + {0x126b4 ,0x1 }, + {0x127b4 ,0x1 }, + {0x128b4 ,0x1 }, + {0x13011 ,0x1 }, + {0x13012 ,0x1 }, + {0x13013 ,0x180 }, + {0x13018 ,0x1 }, + {0x13002 ,0x6209 }, + {0x130b2 ,0x1 }, + {0x131b4 ,0x1 }, + {0x132b4 ,0x1 }, + {0x133b4 ,0x1 }, + {0x134b4 ,0x1 }, + {0x135b4 ,0x1 }, + {0x136b4 ,0x1 }, + {0x137b4 ,0x1 }, + {0x138b4 ,0x1 }, + {0x2003a ,0x2 }, + {0xc0080 ,0x2 }, + {0xd0000 ,0x1 }Lines of this file are not shown. View the raw message.
board/kontron/imx/mx8mm/spl.c new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
If these are the only comments for the patch, no need to repost, I have noted and I will drop them when I merge.
include/configs/kontron_mx8mm.h
Quoted 513 lines
board/kontron/imx/mx8mm/spl.c new file +310
-0Lines of this file are not shown. View the raw message.
configs/kontron_mx8mm_defconfig new file +124
-0Lines of this file are not shown. View the raw message.
include/configs/kontron_mx8mm.h new file +66
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Part of the diff is not shown here. View the raw message.
Re: [RESEND PATCH 6/6] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
In reply to Frieder SchrempfHi Frieder,
Quoted 8 lines · Frieder Schrempf
From: Frieder Schrempf <[email protected]>
The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC.
The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more.
I got error when I build the board, but it isnot related to your code (unused variable in mxc_spi). I sent a patch for fix it.
http://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
However, the MAINTAINERS file is missing as well as for mx6ul. Could you add it, please ? Thanks !
Stefano
Quoted 3,681 lines
Signed-off-by Frieder Schrempf <[email protected]>--- arch/arm/dts/Makefile | 2 + arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 116 ++ .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 237 +++ arch/arm/dts/imx8mm-kontron-n801x-s.dts | 387 ++++ arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 298 +++ arch/arm/mach-imx/imx8m/Kconfig | 8 + board/kontron/imx/mx8mm/Kconfig | 15 + board/kontron/imx/mx8mm/Makefile | 9 + board/kontron/imx/mx8mm/imximage.cfg | 9 + board/kontron/imx/mx8mm/kontron_mx8mm.c | 102 + board/kontron/imx/mx8mm/lpddr4_timing.c | 1846 +++++++++++++++++ board/kontron/imx/mx8mm/spl.c | 330 +++ configs/kontron_mx8mm_defconfig | 124 ++ include/configs/kontron_mx8mm.h | 66 + 14 files changed, 3549 insertions(+)create mode 100644
arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dtscreate mode 100644arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsicreate mode 100644arch/arm/dts/imx8mm-kontron-n801x-s.dtscreate mode 100644arch/arm/dts/imx8mm-kontron-n801x-som.dtsicreate mode 100644 board/kontron/imx/mx8mm/Kconfig create mode 100644 board/kontron/imx/mx8mm/Makefile create mode 100644 board/kontron/imx/mx8mm/imximage.cfg create mode 100644board/kontron/imx/mx8mm/kontron_mx8mm.ccreate mode 100644board/kontron/imx/mx8mm/lpddr4_timing.ccreate mode 100644board/kontron/imx/mx8mm/spl.c
create mode 100644 configs/kontron_mx8mm_defconfig create mode 100644include/configs/kontron_mx8mm.harch/arm/dts/Makefile +2
-0@@ -850,6 +850,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-evk.dtb \ imx8mm-icore-mx8mm-ctouch2.dtb \ imx8mm-icore-mx8mm-edimm2.2.dtb \ + imx8mm-kontron-n801x-s.dtb \ + imx8mm-kontron-n801x-s-lvds.dtb \ imx8mm-venice.dtb \ imx8mm-venice-gw71xx-0x.dtb \ imx8mm-venice-gw72xx-0x.dtb \arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts new file +116
-0@@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm-kontron-n801x-s.dts" + +/ { + model = "Kontron i.MX8MM N801X S LVDS"; + compatible = "kontron,imx8mm-n801x-s-lvds", "fsl,imx8mm"; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; /* period = 5000000 ns => f = 200 Hz */ + power-supply = <®_vdd_24v>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <100>; + status = "okay"; + }; + + reg_panel_pwr: regpanel-pwr { + compatible = "regulator-fixed"; + regulator-name = "reg_panel_pwr"; + regulator-always-on; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_panel_rst: regpanel-rst { + compatible = "regulator-fixed"; + regulator-name = "reg_panel_rst"; + regulator-always-on; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_panel_stby: regpanel-stby { + compatible = "regulator-fixed"; + regulator-name = "reg_panel_stby"; + regulator-always-on; + gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_panel_hinv: regpanel-hinv { + compatible = "regulator-fixed"; + regulator-name = "reg_panel_hinv"; + regulator-always-on; + gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_panel_vinv: regpanel-vinv { + compatible = "regulator-fixed"; + regulator-name = "reg_panel_vinv"; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vdd_24v: regulator-24v { + compatible = "regulator-fixed"; + regulator-name = "reg-vdd-24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-boot-on; + regulator-always-on; + status = "okay"; + }; +}; + +&i2c2 { + status = "okay"; + + gt911@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio3>; + interrupts = <22 8>; + reset-gpios = <&gpio3 23 0>; + irq-gpios = <&gpio3 22 0>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&iomuxc { + pinctrl_panel: panelgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19 /* TFT-PWR - family */ + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 /* RESET family */ + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 /* STBY family */ + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x19 /* HINV panel */ + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 /* VINV panel */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x6 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 /* Touch Interrupt */ + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19 /* Touch Reset */ + >; + }; +};arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi new file +237
-0@@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm-u-boot.dtsi" + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + binman: binman { + multiple-images; + }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + u-boot,dm-spl; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&fec1 { + phy-mode = "rgmii-rxid"; + phy-reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + phy-reset-post-delay = <100>; +}; + +&i2c1 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&i2c2 { + status = "okay"; + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&pinctrl_ecspi1 { + u-boot,dm-spl; +}; + +&pinctrl_i2c1 { + u-boot,dm-spl; +}; + +&pinctrl_pmic { + u-boot,dm-spl; + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + /* Disable Pullup for SD_VSEL */ + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41 + >; +}; + +&pinctrl_uart3 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&pinctrl_usdhc1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1_100mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1_200mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2 { + u-boot,dm-spl; +}; + +&pca9450 { + u-boot,dm-spl; +}; + +&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} { + u-boot,dm-spl; +}; + +&ecspi1 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&uart3 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; + +&wdog1 { + u-boot,dm-spl; +}; + +&binman { + u-boot-spl-ddr { + filename = "u-boot-spl-ddr.bin"; + pad-byte = <0xff>; + align-size = <4>; + align = <4>; + + u-boot-spl { + align-end = <4>; + }; + + blob_1: blob-ext@1 { + filename = "lpddr4_pmu_train_1d_imem.bin"; + size = <0x8000>; + }; + + blob_2: blob-ext@2 { + filename = "lpddr4_pmu_train_1d_dmem.bin"; + size = <0x4000>; + }; + + blob_3: blob-ext@3 { + filename = "lpddr4_pmu_train_2d_imem.bin"; + size = <0x8000>; + }; + + blob_4: blob-ext@4 { + filename = "lpddr4_pmu_train_2d_dmem.bin"; + size = <0x4000>; + }; + }; + + + flash { + mkimage { + args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000"; + + blob { + filename = "u-boot-spl-ddr.bin"; + }; + }; + }; + + itb { + filename = "u-boot.itb"; + + fit { + description = "Configuration to load ATF before U-Boot"; + #address-cells = <1>; + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; + + images { + uboot { + description = "U-Boot (64-bit)"; + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SYS_TEXT_BASE>; + + uboot_blob: blob-ext { + filename = "u-boot-nodtb.bin"; + }; + }; + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x920000>; + entry = <0x920000>; + + atf_blob: blob-ext { + filename = "bl31.bin"; + }; + }; + + fdt { + description = "NAME"; + type = "flat_dt"; + compression = "none"; + + uboot_fdt_blob: blob-ext { + filename = "u-boot.dtb"; + }; + }; + }; + + configurations { + default = "conf"; + + conf { + description = "NAME"; + firmware = "uboot"; + loadables = "atf"; + fdt = "fdt"; + }; + }; + }; + }; +};arch/arm/dts/imx8mm-kontron-n801x-s.dts new file +387
-0@@ -0,0 +1,387 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-n801x-som.dtsi" +#include <dt-bindings/net/mscc-phy-vsc8531.h> + +/ { + model = "Kontron i.MX8MM N801X S"; + compatible = "kontron,imx8mm-n801x-s", "kontron,imx8mm-n801x-som", "fsl,imx8mm"; + + aliases { + ethernet1 = &usbnet; + }; + + /* fixed crystal dedicated to mcp2515 */ + osc_can: clock-osc-can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "osc-can"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led1 { + label = "led1"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "led3"; + gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + }; + + led4 { + label = "led4"; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + }; + + led5 { + label = "led5"; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + }; + + led6 { + label = "led6"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm2 0 5000 0>; + }; + + reg_rst_eth2: regulator-rst-eth2 { + compatible = "regulator-fixed"; + regulator-name = "rst-usb-eth2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth2>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_vdd_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + clocks = <&osc_can>; + interrupt-parent = <&gpio4>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + vdd-supply = <®_vdd_3v3>; + xceiver-supply = <®_vdd_5v>; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-connection-type = "rgmii-rxid"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.0570"; + reg = <0>; + reset-assert-us = <100>; + reset-deassert-us = <100>; + reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; + vsc8531,led-0-mode = <VSC8531_LINK_100_1000_ACTIVITY>; + vsc8531,led-1-mode = <VSC8531_LINK_ACTIVITY>; + vsc8531,led-0-combine-disable; + }; + }; +}; + +&gpio4 { + dsi_mux_sel: dsi_mux_sel { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "dsi-mux-sel"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi_sel>; + }; + + dsi_mux_oe { + gpio-hog; + gpios = <15 GPIO_ACTIVE_LOW>; + output-high; + line-name = "dsi-mux-oe"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi_oe>; + }; +}; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + over-current-active-low; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + pinctrl_can: cangrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + >; + }; + + pinctrl_dsi_sel: dsiselgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x19 + >; + }; + + pinctrl_dsi_oe: dsioegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + >; + }; + + pinctrl_usb_eth2: usbeth2grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; +};arch/arm/dts/imx8mm-kontron-n801x-som.dtsi new file +298
-0@@ -0,0 +1,298 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm.dtsi" + +/ { + model = "Kontron i.MX8MM N801X SoM"; + compatible = "kontron,imx8mm-n801x-som", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + /* + * There are multiple SoM flavors with different DDR sizes. + * The smallest is 1GB. For larger sizes the bootloader will + * update the reg property. + */ + reg = <0x0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = &uart3; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + reg = <0>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_dram: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_snvs: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdda: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_phy: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&uart3 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +};arch/arm/mach-imx/imx8m/Kconfig +8
-0@@ -75,6 +75,13 @@ config TARGET_IMX8MM_VENICE select SUPPORT_SPL select IMX8M_LPDDR4 +config TARGET_KONTRON_MX8MM + bool "Kontron Electronics N80xx" + select BINMAN + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4 + config TARGET_IMX8MN_EVK bool "imx8mn LPDDR4 EVK board" select BINMAN@@ -149,6 +156,7 @@ source "board/freescale/imx8mn_evk/Kconfig" source "board/freescale/imx8mp_evk/Kconfig" source "board/gateworks/venice/Kconfig" source "board/google/imx8mq_phanbell/Kconfig" +source "board/kontron/imx/mx8mm/Kconfig" source "board/phytec/phycore_imx8mm/Kconfig" source "board/phytec/phycore_imx8mp/Kconfig" source "board/ronetix/imx8mq-cm/Kconfig"board/kontron/imx/mx8mm/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +if TARGET_KONTRON_MX8MM + +config SYS_BOARD + string + default "imx/mx8mm" + +config SYS_VENDOR + string + default "kontron" + +config SYS_CONFIG_NAME + string + default "kontron_mx8mm" + +endifboard/kontron/imx/mx8mm/Makefile new file +9
-0@@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2019 Kontron Electronics GmbH + +obj-y := kontron_mx8mm.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endifboard/kontron/imx/mx8mm/imximage.cfg new file +9
-0@@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#define __ASSEMBLY__ + +BOOT_FROM sd +LOADER mkimage.flash.mkimage 0x7E1000board/kontron/imx/mx8mm/kontron_mx8mm.c new file +102
-0@@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 Kontron Electronics GmbH +*/ + +#include <asm/arch/imx-regs.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <fdt_support.h> +#include <linux/errno.h> +#include <net.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int board_phys_sdram_size (phys_size_t *size) +{ +u32 ddr_size =readl (M4_BOOTROM_BASE_ADDR ); + +if (ddr_size ==4 ) { + *size =0x100000000 ; + }else if (ddr_size ==3 ) { + *size =0xc0000000 ; + }else if (ddr_size ==2 ) { + *size =0x80000000 ; + }else if (ddr_size ==1 ) { + *size =0x40000000 ; + }else { +printf ("Unknown DDR type!!!\n" ); + *size =0x40000000 ; + } + +return 0 ; +} + +/* +* If the SoM is mounted on a baseboard with a USB ethernet controller, +* there might be an additional MAC address programmed to the MAC OTP fuses. +* Although the i.MX8MM has only one MAC, the MAC0, MAC1 and MAC2 registers +* in the OTP fuses can still be used to store two separate addresses. +* Try to read the secondary address from MAC1 and MAC2 and adjust the +* devicetree so Linux can pick up the MAC address. +*/ +int fdt_set_usb_eth_addr (void *blob) +{ +u32 value =readl (OCOTP_BASE_ADDR +0x660 ); +unsigned char mac[6 ]; +int node, ret; + + mac[0 ] = value >>24 ; + mac[1 ] = value >>16 ; + mac[2 ] = value >>8 ; + mac[3 ] = value; + + value =readl (OCOTP_BASE_ADDR +0x650 ); + mac[4 ] = value >>24 ; + mac[5 ] = value >>16 ; + + node =fdt_path_offset (blob,fdt_get_alias (blob,"ethernet1" )); +if (node <0 ) { +/* +* There is no node for the USB ethernet in the devicetree. Just skip. +*/ +return 0 ; + } + +if (is_zero_ethaddr (mac)) { +printf ("\nNo MAC address for USB ethernet " +"set in OTP fuses!\n" ); +return 0 ; + } + +if (!is_valid_ethaddr (mac)) { +printf ("\nInvalid MAC address for USB ethernet " +"set in OTP fuses!\n" ); +return -EINVAL ; + } + + ret =fdt_setprop (blob, node,"local-mac-address" , &mac,6 ); +if (ret) + ret =fdt_setprop (blob, node,"mac-address" , &mac,6 ); + +if (ret) { +printf ("\nMissing mac-address or local-mac-addresss property in dt, " +"skip setting MAC address for USB ethernet\n" ); + } + +return 0 ; +} + +int ft_board_setup (void *blob,struct bd_info *bd) +{ +int ret =fdt_set_usb_eth_addr (blob); +if (ret) +return ret; + +return fdt_fixup_memory (blob,PHYS_SDRAM , gd->ram_size); +} + +int board_init (void ) +{ +return 0 ; +}board/kontron/imx/mx8mm/lpddr4_timing.c new file +1846
-0@@ -0,0 +1,1846 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 Kontron Electronics GmbH +*/ + +#include <linux/kernel.h> +#include <common.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +struct dram_cfg_param ddr_ddrc_cfg[] = { +/** Initialize DDRC registers **/ + {0x3d400304 ,0x1 }, + {0x3d400030 ,0x1 }, + {0x3d400000 ,0xa3080020 }, + {0x3d400020 ,0x223 }, + {0x3d400024 ,0x3a980 }, + {0x3d400064 ,0x5b0087 }, + {0x3d4000d0 ,0xc00305ba }, + {0x3d4000d4 ,0x940000 }, + {0x3d4000dc ,0xd4002d }, + {0x3d4000e0 ,0x310000 }, + {0x3d4000e8 ,0x66004d }, + {0x3d4000ec ,0x16004d }, + {0x3d400100 ,0x191e1920 }, + {0x3d400104 ,0x60630 }, + {0x3d40010c ,0xb0b000 }, + {0x3d400110 ,0xe04080e }, + {0x3d400114 ,0x2040c0c }, + {0x3d400118 ,0x1010007 }, + {0x3d40011c ,0x401 }, + {0x3d400130 ,0x20600 }, + {0x3d400134 ,0xc100002 }, + {0x3d400138 ,0xd8 }, + {0x3d400144 ,0x96004b }, + {0x3d400180 ,0x2ee0017 }, + {0x3d400184 ,0x2605b8e }, + {0x3d400188 ,0x0 }, + {0x3d400190 ,0x497820a }, + {0x3d400194 ,0x80303 }, + {0x3d4001b4 ,0x170a }, + {0x3d4001a0 ,0xe0400018 }, + {0x3d4001a4 ,0xdf00e4 }, + {0x3d4001a8 ,0x80000000 }, + {0x3d4001b0 ,0x11 }, + {0x3d4001c0 ,0x1 }, + {0x3d4001c4 ,0x1 }, + {0x3d4000f4 ,0xc99 }, + {0x3d400108 ,0x70e1617 }, + {0x3d400200 ,0x17 }, + {0x3d40020c ,0x0 }, + {0x3d400210 ,0x1f1f }, + {0x3d400204 ,0x80808 }, + {0x3d400214 ,0x7070707 }, + {0x3d400218 ,0x7070707 }, + {0x3d400250 ,0x29001701 }, + {0x3d400254 ,0x2c }, + {0x3d40025c ,0x4000030 }, + {0x3d400264 ,0x900093e7 }, + {0x3d40026c ,0x2005574 }, + {0x3d400400 ,0x111 }, + {0x3d400408 ,0x72ff }, + {0x3d400494 ,0x2100e07 }, + {0x3d400498 ,0x620096 }, + {0x3d40049c ,0x1100e07 }, + {0x3d4004a0 ,0xc8012c }, + {0x3d402020 ,0x21 }, + {0x3d402024 ,0x7d00 }, + {0x3d402050 ,0x20d040 }, + {0x3d402064 ,0xc001c }, + {0x3d4020dc ,0x840000 }, + {0x3d4020e0 ,0x310000 }, + {0x3d4020e8 ,0x66004d }, + {0x3d4020ec ,0x16004d }, + {0x3d402100 ,0xa040305 }, + {0x3d402104 ,0x30407 }, + {0x3d402108 ,0x203060b }, + {0x3d40210c ,0x505000 }, + {0x3d402110 ,0x2040202 }, + {0x3d402114 ,0x2030202 }, + {0x3d402118 ,0x1010004 }, + {0x3d40211c ,0x301 }, + {0x3d402130 ,0x20300 }, + {0x3d402134 ,0xa100002 }, + {0x3d402138 ,0x1d }, + {0x3d402144 ,0x14000a }, + {0x3d402180 ,0x640004 }, + {0x3d402190 ,0x3818200 }, + {0x3d402194 ,0x80303 }, + {0x3d4021b4 ,0x100 }, + {0x3d403020 ,0x21 }, + {0x3d403024 ,0x1f40 }, + {0x3d403050 ,0x20d040 }, + {0x3d403064 ,0x30007 }, + {0x3d4030dc ,0x840000 }, + {0x3d4030e0 ,0x310000 }, + {0x3d4030e8 ,0x66004d }, + {0x3d4030ec ,0x16004d }, + {0x3d403100 ,0xa010102 }, + {0x3d403104 ,0x30404 }, + {0x3d403108 ,0x203060b }, + {0x3d40310c ,0x505000 }, + {0x3d403110 ,0x2040202 }, + {0x3d403114 ,0x2030202 }, + {0x3d403118 ,0x1010004 }, + {0x3d40311c ,0x301 }, + {0x3d403130 ,0x20300 }, + {0x3d403134 ,0xa100002 }, + {0x3d403138 ,0x8 }, + {0x3d403144 ,0x50003 }, + {0x3d403180 ,0x190004 }, + {0x3d403190 ,0x3818200 }, + {0x3d403194 ,0x80303 }, + {0x3d4031b4 ,0x100 }, + {0x3d400028 ,0x0 }, +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param ddr_ddrphy_cfg[] = { + {0x100a0 ,0x0 }, + {0x100a1 ,0x1 }, + {0x100a2 ,0x2 }, + {0x100a3 ,0x3 }, + {0x100a4 ,0x4 }, + {0x100a5 ,0x5 }, + {0x100a6 ,0x6 }, + {0x100a7 ,0x7 }, + {0x110a0 ,0x0 }, + {0x110a1 ,0x1 }, + {0x110a2 ,0x3 }, + {0x110a3 ,0x4 }, + {0x110a4 ,0x5 }, + {0x110a5 ,0x2 }, + {0x110a6 ,0x7 }, + {0x110a7 ,0x6 }, + {0x120a0 ,0x0 }, + {0x120a1 ,0x1 }, + {0x120a2 ,0x3 }, + {0x120a3 ,0x2 }, + {0x120a4 ,0x5 }, + {0x120a5 ,0x4 }, + {0x120a6 ,0x7 }, + {0x120a7 ,0x6 }, + {0x130a0 ,0x0 }, + {0x130a1 ,0x1 }, + {0x130a2 ,0x2 }, + {0x130a3 ,0x3 }, + {0x130a4 ,0x4 }, + {0x130a5 ,0x5 }, + {0x130a6 ,0x6 }, + {0x130a7 ,0x7 }, + {0x1005f ,0x1ff }, + {0x1015f ,0x1ff }, + {0x1105f ,0x1ff }, + {0x1115f ,0x1ff }, + {0x1205f ,0x1ff }, + {0x1215f ,0x1ff }, + {0x1305f ,0x1ff }, + {0x1315f ,0x1ff }, + {0x11005f ,0x1ff }, + {0x11015f ,0x1ff }, + {0x11105f ,0x1ff }, + {0x11115f ,0x1ff }, + {0x11205f ,0x1ff }, + {0x11215f ,0x1ff }, + {0x11305f ,0x1ff }, + {0x11315f ,0x1ff }, + {0x21005f ,0x1ff }, + {0x21015f ,0x1ff }, + {0x21105f ,0x1ff }, + {0x21115f ,0x1ff }, + {0x21205f ,0x1ff }, + {0x21215f ,0x1ff }, + {0x21305f ,0x1ff }, + {0x21315f ,0x1ff }, + {0x55 ,0x1ff }, + {0x1055 ,0x1ff }, + {0x2055 ,0x1ff }, + {0x3055 ,0x1ff }, + {0x4055 ,0x1ff }, + {0x5055 ,0x1ff }, + {0x6055 ,0x1ff }, + {0x7055 ,0x1ff }, + {0x8055 ,0x1ff }, + {0x9055 ,0x1ff }, + {0x200c5 ,0x19 }, + {0x1200c5 ,0x7 }, + {0x2200c5 ,0x7 }, + {0x2002e ,0x2 }, + {0x12002e ,0x2 }, + {0x22002e ,0x2 }, + {0x90204 ,0x0 }, + {0x190204 ,0x0 }, + {0x290204 ,0x0 }, + {0x20024 ,0x1ab }, + {0x2003a ,0x0 }, + {0x120024 ,0x1ab }, + {0x2003a ,0x0 }, + {0x220024 ,0x1ab }, + {0x2003a ,0x0 }, + {0x20056 ,0x3 }, + {0x120056 ,0x3 }, + {0x220056 ,0x3 }, + {0x1004d ,0xe00 }, + {0x1014d ,0xe00 }, + {0x1104d ,0xe00 }, + {0x1114d ,0xe00 }, + {0x1204d ,0xe00 }, + {0x1214d ,0xe00 }, + {0x1304d ,0xe00 }, + {0x1314d ,0xe00 }, + {0x11004d ,0xe00 }, + {0x11014d ,0xe00 }, + {0x11104d ,0xe00 }, + {0x11114d ,0xe00 }, + {0x11204d ,0xe00 }, + {0x11214d ,0xe00 }, + {0x11304d ,0xe00 }, + {0x11314d ,0xe00 }, + {0x21004d ,0xe00 }, + {0x21014d ,0xe00 }, + {0x21104d ,0xe00 }, + {0x21114d ,0xe00 }, + {0x21204d ,0xe00 }, + {0x21214d ,0xe00 }, + {0x21304d ,0xe00 }, + {0x21314d ,0xe00 }, + {0x10049 ,0xeba }, + {0x10149 ,0xeba }, + {0x11049 ,0xeba }, + {0x11149 ,0xeba }, + {0x12049 ,0xeba }, + {0x12149 ,0xeba }, + {0x13049 ,0xeba }, + {0x13149 ,0xeba }, + {0x110049 ,0xeba }, + {0x110149 ,0xeba }, + {0x111049 ,0xeba }, + {0x111149 ,0xeba }, + {0x112049 ,0xeba }, + {0x112149 ,0xeba }, + {0x113049 ,0xeba }, + {0x113149 ,0xeba }, + {0x210049 ,0xeba }, + {0x210149 ,0xeba }, + {0x211049 ,0xeba }, + {0x211149 ,0xeba }, + {0x212049 ,0xeba }, + {0x212149 ,0xeba }, + {0x213049 ,0xeba }, + {0x213149 ,0xeba }, + {0x43 ,0x63 }, + {0x1043 ,0x63 }, + {0x2043 ,0x63 }, + {0x3043 ,0x63 }, + {0x4043 ,0x63 }, + {0x5043 ,0x63 }, + {0x6043 ,0x63 }, + {0x7043 ,0x63 }, + {0x8043 ,0x63 }, + {0x9043 ,0x63 }, + {0x20018 ,0x3 }, + {0x20075 ,0x4 }, + {0x20050 ,0x0 }, + {0x20008 ,0x2ee }, + {0x120008 ,0x64 }, + {0x220008 ,0x19 }, + {0x20088 ,0x9 }, + {0x200b2 ,0xdc }, + {0x10043 ,0x5a1 }, + {0x10143 ,0x5a1 }, + {0x11043 ,0x5a1 }, + {0x11143 ,0x5a1 }, + {0x12043 ,0x5a1 }, + {0x12143 ,0x5a1 }, + {0x13043 ,0x5a1 }, + {0x13143 ,0x5a1 }, + {0x1200b2 ,0xdc }, + {0x110043 ,0x5a1 }, + {0x110143 ,0x5a1 }, + {0x111043 ,0x5a1 }, + {0x111143 ,0x5a1 }, + {0x112043 ,0x5a1 }, + {0x112143 ,0x5a1 }, + {0x113043 ,0x5a1 }, + {0x113143 ,0x5a1 }, + {0x2200b2 ,0xdc }, + {0x210043 ,0x5a1 }, + {0x210143 ,0x5a1 }, + {0x211043 ,0x5a1 }, + {0x211143 ,0x5a1 }, + {0x212043 ,0x5a1 }, + {0x212143 ,0x5a1 }, + {0x213043 ,0x5a1 }, + {0x213143 ,0x5a1 }, + {0x200fa ,0x1 }, + {0x1200fa ,0x1 }, + {0x2200fa ,0x1 }, + {0x20019 ,0x1 }, + {0x120019 ,0x1 }, + {0x220019 ,0x1 }, + {0x200f0 ,0x660 }, + {0x200f1 ,0x0 }, + {0x200f2 ,0x4444 }, + {0x200f3 ,0x8888 }, + {0x200f4 ,0x5665 }, + {0x200f5 ,0x0 }, + {0x200f6 ,0x0 }, + {0x200f7 ,0xf000 }, + {0x20025 ,0x0 }, + {0x2002d ,0x0 }, + {0x12002d ,0x0 }, + {0x22002d ,0x0 }, + {0x200c7 ,0x21 }, + {0x1200c7 ,0x21 }, + {0x2200c7 ,0x21 }, + {0x200ca ,0x24 }, + {0x1200ca ,0x24 }, + {0x2200ca ,0x24 }, +}; + +/* ddr phy trained csr */ +struct dram_cfg_param ddr_ddrphy_trained_csr[] = { + {0x200b2 ,0x0 }, + {0x1200b2 ,0x0 }, + {0x2200b2 ,0x0 }, + {0x200cb ,0x0 }, + {0x10043 ,0x0 }, + {0x110043 ,0x0 }, + {0x210043 ,0x0 }, + {0x10143 ,0x0 }, + {0x110143 ,0x0 }, + {0x210143 ,0x0 }, + {0x11043 ,0x0 }, + {0x111043 ,0x0 }, + {0x211043 ,0x0 }, + {0x11143 ,0x0 }, + {0x111143 ,0x0 }, + {0x211143 ,0x0 }, + {0x12043 ,0x0 }, + {0x112043 ,0x0 }, + {0x212043 ,0x0 }, + {0x12143 ,0x0 }, + {0x112143 ,0x0 }, + {0x212143 ,0x0 }, + {0x13043 ,0x0 }, + {0x113043 ,0x0 }, + {0x213043 ,0x0 }, + {0x13143 ,0x0 }, + {0x113143 ,0x0 }, + {0x213143 ,0x0 }, + {0x80 ,0x0 }, + {0x100080 ,0x0 }, + {0x200080 ,0x0 }, + {0x1080 ,0x0 }, + {0x101080 ,0x0 }, + {0x201080 ,0x0 }, + {0x2080 ,0x0 }, + {0x102080 ,0x0 }, + {0x202080 ,0x0 }, + {0x3080 ,0x0 }, + {0x103080 ,0x0 }, + {0x203080 ,0x0 }, + {0x4080 ,0x0 }, + {0x104080 ,0x0 }, + {0x204080 ,0x0 }, + {0x5080 ,0x0 }, + {0x105080 ,0x0 }, + {0x205080 ,0x0 }, + {0x6080 ,0x0 }, + {0x106080 ,0x0 }, + {0x206080 ,0x0 }, + {0x7080 ,0x0 }, + {0x107080 ,0x0 }, + {0x207080 ,0x0 }, + {0x8080 ,0x0 }, + {0x108080 ,0x0 }, + {0x208080 ,0x0 }, + {0x9080 ,0x0 }, + {0x109080 ,0x0 }, + {0x209080 ,0x0 }, + {0x10080 ,0x0 }, + {0x110080 ,0x0 }, + {0x210080 ,0x0 }, + {0x10180 ,0x0 }, + {0x110180 ,0x0 }, + {0x210180 ,0x0 }, + {0x11080 ,0x0 }, + {0x111080 ,0x0 }, + {0x211080 ,0x0 }, + {0x11180 ,0x0 }, + {0x111180 ,0x0 }, + {0x211180 ,0x0 }, + {0x12080 ,0x0 }, + {0x112080 ,0x0 }, + {0x212080 ,0x0 }, + {0x12180 ,0x0 }, + {0x112180 ,0x0 }, + {0x212180 ,0x0 }, + {0x13080 ,0x0 }, + {0x113080 ,0x0 }, + {0x213080 ,0x0 }, + {0x13180 ,0x0 }, + {0x113180 ,0x0 }, + {0x213180 ,0x0 }, + {0x10081 ,0x0 }, + {0x110081 ,0x0 }, + {0x210081 ,0x0 }, + {0x10181 ,0x0 }, + {0x110181 ,0x0 }, + {0x210181 ,0x0 }, + {0x11081 ,0x0 }, + {0x111081 ,0x0 }, + {0x211081 ,0x0 }, + {0x11181 ,0x0 }, + {0x111181 ,0x0 }, + {0x211181 ,0x0 }, + {0x12081 ,0x0 }, + {0x112081 ,0x0 }, + {0x212081 ,0x0 }, + {0x12181 ,0x0 }, + {0x112181 ,0x0 }, + {0x212181 ,0x0 }, + {0x13081 ,0x0 }, + {0x113081 ,0x0 }, + {0x213081 ,0x0 }, + {0x13181 ,0x0 }, + {0x113181 ,0x0 }, + {0x213181 ,0x0 }, + {0x100d0 ,0x0 }, + {0x1100d0 ,0x0 }, + {0x2100d0 ,0x0 }, + {0x101d0 ,0x0 }, + {0x1101d0 ,0x0 }, + {0x2101d0 ,0x0 }, + {0x110d0 ,0x0 }, + {0x1110d0 ,0x0 }, + {0x2110d0 ,0x0 }, + {0x111d0 ,0x0 }, + {0x1111d0 ,0x0 }, + {0x2111d0 ,0x0 }, + {0x120d0 ,0x0 }, + {0x1120d0 ,0x0 }, + {0x2120d0 ,0x0 }, + {0x121d0 ,0x0 }, + {0x1121d0 ,0x0 }, + {0x2121d0 ,0x0 }, + {0x130d0 ,0x0 }, + {0x1130d0 ,0x0 }, + {0x2130d0 ,0x0 }, + {0x131d0 ,0x0 }, + {0x1131d0 ,0x0 }, + {0x2131d0 ,0x0 }, + {0x100d1 ,0x0 }, + {0x1100d1 ,0x0 }, + {0x2100d1 ,0x0 }, + {0x101d1 ,0x0 }, + {0x1101d1 ,0x0 }, + {0x2101d1 ,0x0 }, + {0x110d1 ,0x0 }, + {0x1110d1 ,0x0 }, + {0x2110d1 ,0x0 }, + {0x111d1 ,0x0 }, + {0x1111d1 ,0x0 }, + {0x2111d1 ,0x0 }, + {0x120d1 ,0x0 }, + {0x1120d1 ,0x0 }, + {0x2120d1 ,0x0 }, + {0x121d1 ,0x0 }, + {0x1121d1 ,0x0 }, + {0x2121d1 ,0x0 }, + {0x130d1 ,0x0 }, + {0x1130d1 ,0x0 }, + {0x2130d1 ,0x0 }, + {0x131d1 ,0x0 }, + {0x1131d1 ,0x0 }, + {0x2131d1 ,0x0 }, + {0x10068 ,0x0 }, + {0x10168 ,0x0 }, + {0x10268 ,0x0 }, + {0x10368 ,0x0 }, + {0x10468 ,0x0 }, + {0x10568 ,0x0 }, + {0x10668 ,0x0 }, + {0x10768 ,0x0 }, + {0x10868 ,0x0 }, + {0x11068 ,0x0 }, + {0x11168 ,0x0 }, + {0x11268 ,0x0 }, + {0x11368 ,0x0 }, + {0x11468 ,0x0 }, + {0x11568 ,0x0 }, + {0x11668 ,0x0 }, + {0x11768 ,0x0 }, + {0x11868 ,0x0 }, + {0x12068 ,0x0 }, + {0x12168 ,0x0 }, + {0x12268 ,0x0 }, + {0x12368 ,0x0 }, + {0x12468 ,0x0 }, + {0x12568 ,0x0 }, + {0x12668 ,0x0 }, + {0x12768 ,0x0 }, + {0x12868 ,0x0 }, + {0x13068 ,0x0 }, + {0x13168 ,0x0 }, + {0x13268 ,0x0 }, + {0x13368 ,0x0 }, + {0x13468 ,0x0 }, + {0x13568 ,0x0 }, + {0x13668 ,0x0 }, + {0x13768 ,0x0 }, + {0x13868 ,0x0 }, + {0x10069 ,0x0 }, + {0x10169 ,0x0 }, + {0x10269 ,0x0 }, + {0x10369 ,0x0 }, + {0x10469 ,0x0 }, + {0x10569 ,0x0 }, + {0x10669 ,0x0 }, + {0x10769 ,0x0 }, + {0x10869 ,0x0 }, + {0x11069 ,0x0 }, + {0x11169 ,0x0 }, + {0x11269 ,0x0 }, + {0x11369 ,0x0 }, + {0x11469 ,0x0 }, + {0x11569 ,0x0 }, + {0x11669 ,0x0 }, + {0x11769 ,0x0 }, + {0x11869 ,0x0 }, + {0x12069 ,0x0 }, + {0x12169 ,0x0 }, + {0x12269 ,0x0 }, + {0x12369 ,0x0 }, + {0x12469 ,0x0 }, + {0x12569 ,0x0 }, + {0x12669 ,0x0 }, + {0x12769 ,0x0 }, + {0x12869 ,0x0 }, + {0x13069 ,0x0 }, + {0x13169 ,0x0 }, + {0x13269 ,0x0 }, + {0x13369 ,0x0 }, + {0x13469 ,0x0 }, + {0x13569 ,0x0 }, + {0x13669 ,0x0 }, + {0x13769 ,0x0 }, + {0x13869 ,0x0 }, + {0x1008c ,0x0 }, + {0x11008c ,0x0 }, + {0x21008c ,0x0 }, + {0x1018c ,0x0 }, + {0x11018c ,0x0 }, + {0x21018c ,0x0 }, + {0x1108c ,0x0 }, + {0x11108c ,0x0 }, + {0x21108c ,0x0 }, + {0x1118c ,0x0 }, + {0x11118c ,0x0 }, + {0x21118c ,0x0 }, + {0x1208c ,0x0 }, + {0x11208c ,0x0 }, + {0x21208c ,0x0 }, + {0x1218c ,0x0 }, + {0x11218c ,0x0 }, + {0x21218c ,0x0 }, + {0x1308c ,0x0 }, + {0x11308c ,0x0 }, + {0x21308c ,0x0 }, + {0x1318c ,0x0 }, + {0x11318c ,0x0 }, + {0x21318c ,0x0 }, + {0x1008d ,0x0 }, + {0x11008d ,0x0 }, + {0x21008d ,0x0 }, + {0x1018d ,0x0 }, + {0x11018d ,0x0 }, + {0x21018d ,0x0 }, + {0x1108d ,0x0 }, + {0x11108d ,0x0 }, + {0x21108d ,0x0 }, + {0x1118d ,0x0 }, + {0x11118d ,0x0 }, + {0x21118d ,0x0 }, + {0x1208d ,0x0 }, + {0x11208d ,0x0 }, + {0x21208d ,0x0 }, + {0x1218d ,0x0 }, + {0x11218d ,0x0 }, + {0x21218d ,0x0 }, + {0x1308d ,0x0 }, + {0x11308d ,0x0 }, + {0x21308d ,0x0 }, + {0x1318d ,0x0 }, + {0x11318d ,0x0 }, + {0x21318d ,0x0 }, + {0x100c0 ,0x0 }, + {0x1100c0 ,0x0 }, + {0x2100c0 ,0x0 }, + {0x101c0 ,0x0 }, + {0x1101c0 ,0x0 }, + {0x2101c0 ,0x0 }, + {0x102c0 ,0x0 }, + {0x1102c0 ,0x0 }, + {0x2102c0 ,0x0 }, + {0x103c0 ,0x0 }, + {0x1103c0 ,0x0 }, + {0x2103c0 ,0x0 }, + {0x104c0 ,0x0 }, + {0x1104c0 ,0x0 }, + {0x2104c0 ,0x0 }, + {0x105c0 ,0x0 }, + {0x1105c0 ,0x0 }, + {0x2105c0 ,0x0 }, + {0x106c0 ,0x0 }, + {0x1106c0 ,0x0 }, + {0x2106c0 ,0x0 }, + {0x107c0 ,0x0 }, + {0x1107c0 ,0x0 }, + {0x2107c0 ,0x0 }, + {0x108c0 ,0x0 }, + {0x1108c0 ,0x0 }, + {0x2108c0 ,0x0 }, + {0x110c0 ,0x0 }, + {0x1110c0 ,0x0 }, + {0x2110c0 ,0x0 }, + {0x111c0 ,0x0 }, + {0x1111c0 ,0x0 }, + {0x2111c0 ,0x0 }, + {0x112c0 ,0x0 }, + {0x1112c0 ,0x0 }, + {0x2112c0 ,0x0 }, + {0x113c0 ,0x0 }, + {0x1113c0 ,0x0 }, + {0x2113c0 ,0x0 }, + {0x114c0 ,0x0 }, + {0x1114c0 ,0x0 }, + {0x2114c0 ,0x0 }, + {0x115c0 ,0x0 }, + {0x1115c0 ,0x0 }, + {0x2115c0 ,0x0 }, + {0x116c0 ,0x0 }, + {0x1116c0 ,0x0 }, + {0x2116c0 ,0x0 }, + {0x117c0 ,0x0 }, + {0x1117c0 ,0x0 }, + {0x2117c0 ,0x0 }, + {0x118c0 ,0x0 }, + {0x1118c0 ,0x0 }, + {0x2118c0 ,0x0 }, + {0x120c0 ,0x0 }, + {0x1120c0 ,0x0 }, + {0x2120c0 ,0x0 }, + {0x121c0 ,0x0 }, + {0x1121c0 ,0x0 }, + {0x2121c0 ,0x0 }, + {0x122c0 ,0x0 }, + {0x1122c0 ,0x0 }, + {0x2122c0 ,0x0 }, + {0x123c0 ,0x0 }, + {0x1123c0 ,0x0 }, + {0x2123c0 ,0x0 }, + {0x124c0 ,0x0 }, + {0x1124c0 ,0x0 }, + {0x2124c0 ,0x0 }, + {0x125c0 ,0x0 }, + {0x1125c0 ,0x0 }, + {0x2125c0 ,0x0 }, + {0x126c0 ,0x0 }, + {0x1126c0 ,0x0 }, + {0x2126c0 ,0x0 }, + {0x127c0 ,0x0 }, + {0x1127c0 ,0x0 }, + {0x2127c0 ,0x0 }, + {0x128c0 ,0x0 }, + {0x1128c0 ,0x0 }, + {0x2128c0 ,0x0 }, + {0x130c0 ,0x0 }, + {0x1130c0 ,0x0 }, + {0x2130c0 ,0x0 }, + {0x131c0 ,0x0 }, + {0x1131c0 ,0x0 }, + {0x2131c0 ,0x0 }, + {0x132c0 ,0x0 }, + {0x1132c0 ,0x0 }, + {0x2132c0 ,0x0 }, + {0x133c0 ,0x0 }, + {0x1133c0 ,0x0 }, + {0x2133c0 ,0x0 }, + {0x134c0 ,0x0 }, + {0x1134c0 ,0x0 }, + {0x2134c0 ,0x0 }, + {0x135c0 ,0x0 }, + {0x1135c0 ,0x0 }, + {0x2135c0 ,0x0 }, + {0x136c0 ,0x0 }, + {0x1136c0 ,0x0 }, + {0x2136c0 ,0x0 }, + {0x137c0 ,0x0 }, + {0x1137c0 ,0x0 }, + {0x2137c0 ,0x0 }, + {0x138c0 ,0x0 }, + {0x1138c0 ,0x0 }, + {0x2138c0 ,0x0 }, + {0x100c1 ,0x0 }, + {0x1100c1 ,0x0 }, + {0x2100c1 ,0x0 }, + {0x101c1 ,0x0 }, + {0x1101c1 ,0x0 }, + {0x2101c1 ,0x0 }, + {0x102c1 ,0x0 }, + {0x1102c1 ,0x0 }, + {0x2102c1 ,0x0 }, + {0x103c1 ,0x0 }, + {0x1103c1 ,0x0 }, + {0x2103c1 ,0x0 }, + {0x104c1 ,0x0 }, + {0x1104c1 ,0x0 }, + {0x2104c1 ,0x0 }, + {0x105c1 ,0x0 }, + {0x1105c1 ,0x0 }, + {0x2105c1 ,0x0 }, + {0x106c1 ,0x0 }, + {0x1106c1 ,0x0 }, + {0x2106c1 ,0x0 }, + {0x107c1 ,0x0 }, + {0x1107c1 ,0x0 }, + {0x2107c1 ,0x0 }, + {0x108c1 ,0x0 }, + {0x1108c1 ,0x0 }, + {0x2108c1 ,0x0 }, + {0x110c1 ,0x0 }, + {0x1110c1 ,0x0 }, + {0x2110c1 ,0x0 }, + {0x111c1 ,0x0 }, + {0x1111c1 ,0x0 }, + {0x2111c1 ,0x0 }, + {0x112c1 ,0x0 }, + {0x1112c1 ,0x0 }, + {0x2112c1 ,0x0 }, + {0x113c1 ,0x0 }, + {0x1113c1 ,0x0 }, + {0x2113c1 ,0x0 }, + {0x114c1 ,0x0 }, + {0x1114c1 ,0x0 }, + {0x2114c1 ,0x0 }, + {0x115c1 ,0x0 }, + {0x1115c1 ,0x0 }, + {0x2115c1 ,0x0 }, + {0x116c1 ,0x0 }, + {0x1116c1 ,0x0 }, + {0x2116c1 ,0x0 }, + {0x117c1 ,0x0 }, + {0x1117c1 ,0x0 }, + {0x2117c1 ,0x0 }, + {0x118c1 ,0x0 }, + {0x1118c1 ,0x0 }, + {0x2118c1 ,0x0 }, + {0x120c1 ,0x0 }, + {0x1120c1 ,0x0 }, + {0x2120c1 ,0x0 }, + {0x121c1 ,0x0 }, + {0x1121c1 ,0x0 }, + {0x2121c1 ,0x0 }, + {0x122c1 ,0x0 }, + {0x1122c1 ,0x0 }, + {0x2122c1 ,0x0 }, + {0x123c1 ,0x0 }, + {0x1123c1 ,0x0 }, + {0x2123c1 ,0x0 }, + {0x124c1 ,0x0 }, + {0x1124c1 ,0x0 }, + {0x2124c1 ,0x0 }, + {0x125c1 ,0x0 }, + {0x1125c1 ,0x0 }, + {0x2125c1 ,0x0 }, + {0x126c1 ,0x0 }, + {0x1126c1 ,0x0 }, + {0x2126c1 ,0x0 }, + {0x127c1 ,0x0 }, + {0x1127c1 ,0x0 }, + {0x2127c1 ,0x0 }, + {0x128c1 ,0x0 }, + {0x1128c1 ,0x0 }, + {0x2128c1 ,0x0 }, + {0x130c1 ,0x0 }, + {0x1130c1 ,0x0 }, + {0x2130c1 ,0x0 }, + {0x131c1 ,0x0 }, + {0x1131c1 ,0x0 }, + {0x2131c1 ,0x0 }, + {0x132c1 ,0x0 }, + {0x1132c1 ,0x0 }, + {0x2132c1 ,0x0 }, + {0x133c1 ,0x0 }, + {0x1133c1 ,0x0 }, + {0x2133c1 ,0x0 }, + {0x134c1 ,0x0 }, + {0x1134c1 ,0x0 }, + {0x2134c1 ,0x0 }, + {0x135c1 ,0x0 }, + {0x1135c1 ,0x0 }, + {0x2135c1 ,0x0 }, + {0x136c1 ,0x0 }, + {0x1136c1 ,0x0 }, + {0x2136c1 ,0x0 }, + {0x137c1 ,0x0 }, + {0x1137c1 ,0x0 }, + {0x2137c1 ,0x0 }, + {0x138c1 ,0x0 }, + {0x1138c1 ,0x0 }, + {0x2138c1 ,0x0 }, + {0x10020 ,0x0 }, + {0x110020 ,0x0 }, + {0x210020 ,0x0 }, + {0x11020 ,0x0 }, + {0x111020 ,0x0 }, + {0x211020 ,0x0 }, + {0x12020 ,0x0 }, + {0x112020 ,0x0 }, + {0x212020 ,0x0 }, + {0x13020 ,0x0 }, + {0x113020 ,0x0 }, + {0x213020 ,0x0 }, + {0x20072 ,0x0 }, + {0x20073 ,0x0 }, + {0x20074 ,0x0 }, + {0x100aa ,0x0 }, + {0x110aa ,0x0 }, + {0x120aa ,0x0 }, + {0x130aa ,0x0 }, + {0x20010 ,0x0 }, + {0x120010 ,0x0 }, + {0x220010 ,0x0 }, + {0x20011 ,0x0 }, + {0x120011 ,0x0 }, + {0x220011 ,0x0 }, + {0x100ae ,0x0 }, + {0x1100ae ,0x0 }, + {0x2100ae ,0x0 }, + {0x100af ,0x0 }, + {0x1100af ,0x0 }, + {0x2100af ,0x0 }, + {0x110ae ,0x0 }, + {0x1110ae ,0x0 }, + {0x2110ae ,0x0 }, + {0x110af ,0x0 }, + {0x1110af ,0x0 }, + {0x2110af ,0x0 }, + {0x120ae ,0x0 }, + {0x1120ae ,0x0 }, + {0x2120ae ,0x0 }, + {0x120af ,0x0 }, + {0x1120af ,0x0 }, + {0x2120af ,0x0 }, + {0x130ae ,0x0 }, + {0x1130ae ,0x0 }, + {0x2130ae ,0x0 }, + {0x130af ,0x0 }, + {0x1130af ,0x0 }, + {0x2130af ,0x0 }, + {0x20020 ,0x0 }, + {0x120020 ,0x0 }, + {0x220020 ,0x0 }, + {0x100a0 ,0x0 }, + {0x100a1 ,0x0 }, + {0x100a2 ,0x0 }, + {0x100a3 ,0x0 }, + {0x100a4 ,0x0 }, + {0x100a5 ,0x0 }, + {0x100a6 ,0x0 }, + {0x100a7 ,0x0 }, + {0x110a0 ,0x0 }, + {0x110a1 ,0x0 }, + {0x110a2 ,0x0 }, + {0x110a3 ,0x0 }, + {0x110a4 ,0x0 }, + {0x110a5 ,0x0 }, + {0x110a6 ,0x0 }, + {0x110a7 ,0x0 }, + {0x120a0 ,0x0 }, + {0x120a1 ,0x0 }, + {0x120a2 ,0x0 }, + {0x120a3 ,0x0 }, + {0x120a4 ,0x0 }, + {0x120a5 ,0x0 }, + {0x120a6 ,0x0 }, + {0x120a7 ,0x0 }, + {0x130a0 ,0x0 }, + {0x130a1 ,0x0 }, + {0x130a2 ,0x0 }, + {0x130a3 ,0x0 }, + {0x130a4 ,0x0 }, + {0x130a5 ,0x0 }, + {0x130a6 ,0x0 }, + {0x130a7 ,0x0 }, + {0x2007c ,0x0 }, + {0x12007c ,0x0 }, + {0x22007c ,0x0 }, + {0x2007d ,0x0 }, + {0x12007d ,0x0 }, + {0x22007d ,0x0 }, + {0x400fd ,0x0 }, + {0x400c0 ,0x0 }, + {0x90201 ,0x0 }, + {0x190201 ,0x0 }, + {0x290201 ,0x0 }, + {0x90202 ,0x0 }, + {0x190202 ,0x0 }, + {0x290202 ,0x0 }, + {0x90203 ,0x0 }, + {0x190203 ,0x0 }, + {0x290203 ,0x0 }, + {0x90204 ,0x0 }, + {0x190204 ,0x0 }, + {0x290204 ,0x0 }, + {0x90205 ,0x0 }, + {0x190205 ,0x0 }, + {0x290205 ,0x0 }, + {0x90206 ,0x0 }, + {0x190206 ,0x0 }, + {0x290206 ,0x0 }, + {0x90207 ,0x0 }, + {0x190207 ,0x0 }, + {0x290207 ,0x0 }, + {0x90208 ,0x0 }, + {0x190208 ,0x0 }, + {0x290208 ,0x0 }, + {0x10062 ,0x0 }, + {0x10162 ,0x0 }, + {0x10262 ,0x0 }, + {0x10362 ,0x0 }, + {0x10462 ,0x0 }, + {0x10562 ,0x0 }, + {0x10662 ,0x0 }, + {0x10762 ,0x0 }, + {0x10862 ,0x0 }, + {0x11062 ,0x0 }, + {0x11162 ,0x0 }, + {0x11262 ,0x0 }, + {0x11362 ,0x0 }, + {0x11462 ,0x0 }, + {0x11562 ,0x0 }, + {0x11662 ,0x0 }, + {0x11762 ,0x0 }, + {0x11862 ,0x0 }, + {0x12062 ,0x0 }, + {0x12162 ,0x0 }, + {0x12262 ,0x0 }, + {0x12362 ,0x0 }, + {0x12462 ,0x0 }, + {0x12562 ,0x0 }, + {0x12662 ,0x0 }, + {0x12762 ,0x0 }, + {0x12862 ,0x0 }, + {0x13062 ,0x0 }, + {0x13162 ,0x0 }, + {0x13262 ,0x0 }, + {0x13362 ,0x0 }, + {0x13462 ,0x0 }, + {0x13562 ,0x0 }, + {0x13662 ,0x0 }, + {0x13762 ,0x0 }, + {0x13862 ,0x0 }, + {0x20077 ,0x0 }, + {0x10001 ,0x0 }, + {0x11001 ,0x0 }, + {0x12001 ,0x0 }, + {0x13001 ,0x0 }, + {0x10040 ,0x0 }, + {0x10140 ,0x0 }, + {0x10240 ,0x0 }, + {0x10340 ,0x0 }, + {0x10440 ,0x0 }, + {0x10540 ,0x0 }, + {0x10640 ,0x0 }, + {0x10740 ,0x0 }, + {0x10840 ,0x0 }, + {0x10030 ,0x0 }, + {0x10130 ,0x0 }, + {0x10230 ,0x0 }, + {0x10330 ,0x0 }, + {0x10430 ,0x0 }, + {0x10530 ,0x0 }, + {0x10630 ,0x0 }, + {0x10730 ,0x0 }, + {0x10830 ,0x0 }, + {0x11040 ,0x0 }, + {0x11140 ,0x0 }, + {0x11240 ,0x0 }, + {0x11340 ,0x0 }, + {0x11440 ,0x0 }, + {0x11540 ,0x0 }, + {0x11640 ,0x0 }, + {0x11740 ,0x0 }, + {0x11840 ,0x0 }, + {0x11030 ,0x0 }, + {0x11130 ,0x0 }, + {0x11230 ,0x0 }, + {0x11330 ,0x0 }, + {0x11430 ,0x0 }, + {0x11530 ,0x0 }, + {0x11630 ,0x0 }, + {0x11730 ,0x0 }, + {0x11830 ,0x0 }, + {0x12040 ,0x0 }, + {0x12140 ,0x0 }, + {0x12240 ,0x0 }, + {0x12340 ,0x0 }, + {0x12440 ,0x0 }, + {0x12540 ,0x0 }, + {0x12640 ,0x0 }, + {0x12740 ,0x0 }, + {0x12840 ,0x0 }, + {0x12030 ,0x0 }, + {0x12130 ,0x0 }, + {0x12230 ,0x0 }, + {0x12330 ,0x0 }, + {0x12430 ,0x0 }, + {0x12530 ,0x0 }, + {0x12630 ,0x0 }, + {0x12730 ,0x0 }, + {0x12830 ,0x0 }, + {0x13040 ,0x0 }, + {0x13140 ,0x0 }, + {0x13240 ,0x0 }, + {0x13340 ,0x0 }, + {0x13440 ,0x0 }, + {0x13540 ,0x0 }, + {0x13640 ,0x0 }, + {0x13740 ,0x0 }, + {0x13840 ,0x0 }, + {0x13030 ,0x0 }, + {0x13130 ,0x0 }, + {0x13230 ,0x0 }, + {0x13330 ,0x0 }, + {0x13430 ,0x0 }, + {0x13530 ,0x0 }, + {0x13630 ,0x0 }, + {0x13730 ,0x0 }, + {0x13830 ,0x0 }, +}; +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_cfg[] = { + {0xd0000 ,0x0 }, + {0x54003 ,0xbb8 }, + {0x54004 ,0x2 }, + {0x54005 ,0x2228 }, + {0x54006 ,0x11 }, + {0x54008 ,0x131f }, + {0x54009 ,0xc8 }, + {0x5400b ,0x2 }, + {0x5400d ,0x100 }, + {0x54012 ,0x310 }, + {0x54019 ,0x2dd4 }, + {0x5401a ,0x31 }, + {0x5401b ,0x4d66 }, + {0x5401c ,0x4d00 }, + {0x5401e ,0x16 }, + {0x5401f ,0x2dd4 }, + {0x54020 ,0x31 }, + {0x54021 ,0x4d66 }, + {0x54022 ,0x4d00 }, + {0x54024 ,0x16 }, + {0x5402b ,0x1000 }, + {0x5402c ,0x3 }, + {0x54032 ,0xd400 }, + {0x54033 ,0x312d }, + {0x54034 ,0x6600 }, + {0x54035 ,0x4d }, + {0x54036 ,0x4d }, + {0x54037 ,0x1600 }, + {0x54038 ,0xd400 }, + {0x54039 ,0x312d }, + {0x5403a ,0x6600 }, + {0x5403b ,0x4d }, + {0x5403c ,0x4d }, + {0x5403d ,0x1600 }, + {0xd0000 ,0x1 }, +}; + + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp1_cfg[] = { + {0xd0000 ,0x0 }, + {0x54002 ,0x101 }, + {0x54003 ,0x190 }, + {0x54004 ,0x2 }, + {0x54005 ,0x2228 }, + {0x54006 ,0x11 }, + {0x54008 ,0x121f }, + {0x54009 ,0xc8 }, + {0x5400b ,0x2 }, + {0x5400d ,0x100 }, + {0x54012 ,0x310 }, + {0x54019 ,0x84 }, + {0x5401a ,0x31 }, + {0x5401b ,0x4d66 }, + {0x5401c ,0x4d00 }, + {0x5401e ,0x16 }, + {0x5401f ,0x84 }, + {0x54020 ,0x31 }, + {0x54021 ,0x4d66 }, + {0x54022 ,0x4d00 }, + {0x54024 ,0x16 }, + {0x5402b ,0x1000 }, + {0x5402c ,0x3 }, + {0x54032 ,0x8400 }, + {0x54033 ,0x3100 }, + {0x54034 ,0x6600 }, + {0x54035 ,0x4d }, + {0x54036 ,0x4d }, + {0x54037 ,0x1600 }, + {0x54038 ,0x8400 }, + {0x54039 ,0x3100 }, + {0x5403a ,0x6600 }, + {0x5403b ,0x4d }, + {0x5403c ,0x4d }, + {0x5403d ,0x1600 }, + {0xd0000 ,0x1 }, +}; + + +/* P2 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp2_cfg[] = { + {0xd0000 ,0x0 }, + {0x54002 ,0x102 }, + {0x54003 ,0x64 }, + {0x54004 ,0x2 }, + {0x54005 ,0x2228 }, + {0x54006 ,0x11 }, + {0x54008 ,0x121f }, + {0x54009 ,0xc8 }, + {0x5400b ,0x2 }, + {0x5400d ,0x100 }, + {0x54012 ,0x310 }, + {0x54019 ,0x84 }, + {0x5401a ,0x31 }, + {0x5401b ,0x4d66 }, + {0x5401c ,0x4d00 }, + {0x5401e ,0x16 }, + {0x5401f ,0x84 }, + {0x54020 ,0x31 }, + {0x54021 ,0x4d66 }, + {0x54022 ,0x4d00 }, + {0x54024 ,0x16 }, + {0x5402b ,0x1000 }, + {0x5402c ,0x3 }, + {0x54032 ,0x8400 }, + {0x54033 ,0x3100 }, + {0x54034 ,0x6600 }, + {0x54035 ,0x4d }, + {0x54036 ,0x4d }, + {0x54037 ,0x1600 }, + {0x54038 ,0x8400 }, + {0x54039 ,0x3100 }, + {0x5403a ,0x6600 }, + {0x5403b ,0x4d }, + {0x5403c ,0x4d }, + {0x5403d ,0x1600 }, + {0xd0000 ,0x1 }, +}; + + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_2d_cfg[] = { + {0xd0000 ,0x0 }, + {0x54003 ,0xbb8 }, + {0x54004 ,0x2 }, + {0x54005 ,0x2228 }, + {0x54006 ,0x11 }, + {0x54008 ,0x61 }, + {0x54009 ,0xc8 }, + {0x5400b ,0x2 }, + {0x5400f ,0x100 }, + {0x54010 ,0x1f7f }, + {0x54012 ,0x310 }, + {0x54019 ,0x2dd4 }, + {0x5401a ,0x31 }, + {0x5401b ,0x4d66 }, + {0x5401c ,0x4d00 }, + {0x5401e ,0x16 }, + {0x5401f ,0x2dd4 }, + {0x54020 ,0x31 }, + {0x54021 ,0x4d66 }, + {0x54022 ,0x4d00 }, + {0x54024 ,0x16 }, + {0x5402b ,0x1000 }, + {0x5402c ,0x3 }, + {0x54032 ,0xd400 }, + {0x54033 ,0x312d }, + {0x54034 ,0x6600 }, + {0x54035 ,0x4d }, + {0x54036 ,0x4d }, + {0x54037 ,0x1600 }, + {0x54038 ,0xd400 }, + {0x54039 ,0x312d }, + {0x5403a ,0x6600 }, + {0x5403b ,0x4d }, + {0x5403c ,0x4d }, + {0x5403d ,0x1600 }, + {0xd0000 ,0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param ddr_phy_pie[] = { + {0xd0000 ,0x0 }, + {0x90000 ,0x10 }, + {0x90001 ,0x400 }, + {0x90002 ,0x10e }, + {0x90003 ,0x0 }, + {0x90004 ,0x0 }, + {0x90005 ,0x8 }, + {0x90029 ,0xb }, + {0x9002a ,0x480 }, + {0x9002b ,0x109 }, + {0x9002c ,0x8 }, + {0x9002d ,0x448 }, + {0x9002e ,0x139 }, + {0x9002f ,0x8 }, + {0x90030 ,0x478 }, + {0x90031 ,0x109 }, + {0x90032 ,0x0 }, + {0x90033 ,0xe8 }, + {0x90034 ,0x109 }, + {0x90035 ,0x2 }, + {0x90036 ,0x10 }, + {0x90037 ,0x139 }, + {0x90038 ,0xf }, + {0x90039 ,0x7c0 }, + {0x9003a ,0x139 }, + {0x9003b ,0x44 }, + {0x9003c ,0x630 }, + {0x9003d ,0x159 }, + {0x9003e ,0x14f }, + {0x9003f ,0x630 }, + {0x90040 ,0x159 }, + {0x90041 ,0x47 }, + {0x90042 ,0x630 }, + {0x90043 ,0x149 }, + {0x90044 ,0x4f }, + {0x90045 ,0x630 }, + {0x90046 ,0x179 }, + {0x90047 ,0x8 }, + {0x90048 ,0xe0 }, + {0x90049 ,0x109 }, + {0x9004a ,0x0 }, + {0x9004b ,0x7c8 }, + {0x9004c ,0x109 }, + {0x9004d ,0x0 }, + {0x9004e ,0x1 }, + {0x9004f ,0x8 }, + {0x90050 ,0x0 }, + {0x90051 ,0x45a }, + {0x90052 ,0x9 }, + {0x90053 ,0x0 }, + {0x90054 ,0x448 }, + {0x90055 ,0x109 }, + {0x90056 ,0x40 }, + {0x90057 ,0x630 }, + {0x90058 ,0x179 }, + {0x90059 ,0x1 }, + {0x9005a ,0x618 }, + {0x9005b ,0x109 }, + {0x9005c ,0x40c0 }, + {0x9005d ,0x630 }, + {0x9005e ,0x149 }, + {0x9005f ,0x8 }, + {0x90060 ,0x4 }, + {0x90061 ,0x48 }, + {0x90062 ,0x4040 }, + {0x90063 ,0x630 }, + {0x90064 ,0x149 }, + {0x90065 ,0x0 }, + {0x90066 ,0x4 }, + {0x90067 ,0x48 }, + {0x90068 ,0x40 }, + {0x90069 ,0x630 }, + {0x9006a ,0x149 }, + {0x9006b ,0x10 }, + {0x9006c ,0x4 }, + {0x9006d ,0x18 }, + {0x9006e ,0x0 }, + {0x9006f ,0x4 }, + {0x90070 ,0x78 }, + {0x90071 ,0x549 }, + {0x90072 ,0x630 }, + {0x90073 ,0x159 }, + {0x90074 ,0xd49 }, + {0x90075 ,0x630 }, + {0x90076 ,0x159 }, + {0x90077 ,0x94a }, + {0x90078 ,0x630 }, + {0x90079 ,0x159 }, + {0x9007a ,0x441 }, + {0x9007b ,0x630 }, + {0x9007c ,0x149 }, + {0x9007d ,0x42 }, + {0x9007e ,0x630 }, + {0x9007f ,0x149 }, + {0x90080 ,0x1 }, + {0x90081 ,0x630 }, + {0x90082 ,0x149 }, + {0x90083 ,0x0 }, + {0x90084 ,0xe0 }, + {0x90085 ,0x109 }, + {0x90086 ,0xa }, + {0x90087 ,0x10 }, + {0x90088 ,0x109 }, + {0x90089 ,0x9 }, + {0x9008a ,0x3c0 }, + {0x9008b ,0x149 }, + {0x9008c ,0x9 }, + {0x9008d ,0x3c0 }, + {0x9008e ,0x159 }, + {0x9008f ,0x18 }, + {0x90090 ,0x10 }, + {0x90091 ,0x109 }, + {0x90092 ,0x0 }, + {0x90093 ,0x3c0 }, + {0x90094 ,0x109 }, + {0x90095 ,0x18 }, + {0x90096 ,0x4 }, + {0x90097 ,0x48 }, + {0x90098 ,0x18 }, + {0x90099 ,0x4 }, + {0x9009a ,0x58 }, + {0x9009b ,0xa }, + {0x9009c ,0x10 }, + {0x9009d ,0x109 }, + {0x9009e ,0x2 }, + {0x9009f ,0x10 }, + {0x900a0 ,0x109 }, + {0x900a1 ,0x5 }, + {0x900a2 ,0x7c0 }, + {0x900a3 ,0x109 }, + {0x900a4 ,0x10 }, + {0x900a5 ,0x10 }, + {0x900a6 ,0x109 }, + {0x40000 ,0x811 }, + {0x40020 ,0x880 }, + {0x40040 ,0x0 }, + {0x40060 ,0x0 }, + {0x40001 ,0x4008 }, + {0x40021 ,0x83 }, + {0x40041 ,0x4f }, + {0x40061 ,0x0 }, + {0x40002 ,0x4040 }, + {0x40022 ,0x83 }, + {0x40042 ,0x51 }, + {0x40062 ,0x0 }, + {0x40003 ,0x811 }, + {0x40023 ,0x880 }, + {0x40043 ,0x0 }, + {0x40063 ,0x0 }, + {0x40004 ,0x720 }, + {0x40024 ,0xf }, + {0x40044 ,0x1740 }, + {0x40064 ,0x0 }, + {0x40005 ,0x16 }, + {0x40025 ,0x83 }, + {0x40045 ,0x4b }, + {0x40065 ,0x0 }, + {0x40006 ,0x716 }, + {0x40026 ,0xf }, + {0x40046 ,0x2001 }, + {0x40066 ,0x0 }, + {0x40007 ,0x716 }, + {0x40027 ,0xf }, + {0x40047 ,0x2800 }, + {0x40067 ,0x0 }, + {0x40008 ,0x716 }, + {0x40028 ,0xf }, + {0x40048 ,0xf00 }, + {0x40068 ,0x0 }, + {0x40009 ,0x720 }, + {0x40029 ,0xf }, + {0x40049 ,0x1400 }, + {0x40069 ,0x0 }, + {0x4000a ,0xe08 }, + {0x4002a ,0xc15 }, + {0x4004a ,0x0 }, + {0x4006a ,0x0 }, + {0x4000b ,0x623 }, + {0x4002b ,0x15 }, + {0x4004b ,0x0 }, + {0x4006b ,0x0 }, + {0x4000c ,0x4028 }, + {0x4002c ,0x80 }, + {0x4004c ,0x0 }, + {0x4006c ,0x0 }, + {0x4000d ,0xe08 }, + {0x4002d ,0xc1a }, + {0x4004d ,0x0 }, + {0x4006d ,0x0 }, + {0x4000e ,0x623 }, + {0x4002e ,0x1a }, + {0x4004e ,0x0 }, + {0x4006e ,0x0 }, + {0x4000f ,0x4040 }, + {0x4002f ,0x80 }, + {0x4004f ,0x0 }, + {0x4006f ,0x0 }, + {0x40010 ,0x2604 }, + {0x40030 ,0x15 }, + {0x40050 ,0x0 }, + {0x40070 ,0x0 }, + {0x40011 ,0x708 }, + {0x40031 ,0x5 }, + {0x40051 ,0x0 }, + {0x40071 ,0x2002 }, + {0x40012 ,0x8 }, + {0x40032 ,0x80 }, + {0x40052 ,0x0 }, + {0x40072 ,0x0 }, + {0x40013 ,0x2604 }, + {0x40033 ,0x1a }, + {0x40053 ,0x0 }, + {0x40073 ,0x0 }, + {0x40014 ,0x708 }, + {0x40034 ,0xa }, + {0x40054 ,0x0 }, + {0x40074 ,0x2002 }, + {0x40015 ,0x4040 }, + {0x40035 ,0x80 }, + {0x40055 ,0x0 }, + {0x40075 ,0x0 }, + {0x40016 ,0x60a }, + {0x40036 ,0x15 }, + {0x40056 ,0x1200 }, + {0x40076 ,0x0 }, + {0x40017 ,0x61a }, + {0x40037 ,0x15 }, + {0x40057 ,0x1300 }, + {0x40077 ,0x0 }, + {0x40018 ,0x60a }, + {0x40038 ,0x1a }, + {0x40058 ,0x1200 }, + {0x40078 ,0x0 }, + {0x40019 ,0x642 }, + {0x40039 ,0x1a }, + {0x40059 ,0x1300 }, + {0x40079 ,0x0 }, + {0x4001a ,0x4808 }, + {0x4003a ,0x880 }, + {0x4005a ,0x0 }, + {0x4007a ,0x0 }, + {0x900a7 ,0x0 }, + {0x900a8 ,0x790 }, + {0x900a9 ,0x11a }, + {0x900aa ,0x8 }, + {0x900ab ,0x7aa }, + {0x900ac ,0x2a }, + {0x900ad ,0x10 }, + {0x900ae ,0x7b2 }, + {0x900af ,0x2a }, + {0x900b0 ,0x0 }, + {0x900b1 ,0x7c8 }, + {0x900b2 ,0x109 }, + {0x900b3 ,0x10 }, + {0x900b4 ,0x2a8 }, + {0x900b5 ,0x129 }, + {0x900b6 ,0x8 }, + {0x900b7 ,0x370 }, + {0x900b8 ,0x129 }, + {0x900b9 ,0xa }, + {0x900ba ,0x3c8 }, + {0x900bb ,0x1a9 }, + {0x900bc ,0xc }, + {0x900bd ,0x408 }, + {0x900be ,0x199 }, + {0x900bf ,0x14 }, + {0x900c0 ,0x790 }, + {0x900c1 ,0x11a }, + {0x900c2 ,0x8 }, + {0x900c3 ,0x4 }, + {0x900c4 ,0x18 }, + {0x900c5 ,0xe }, + {0x900c6 ,0x408 }, + {0x900c7 ,0x199 }, + {0x900c8 ,0x8 }, + {0x900c9 ,0x8568 }, + {0x900ca ,0x108 }, + {0x900cb ,0x18 }, + {0x900cc ,0x790 }, + {0x900cd ,0x16a }, + {0x900ce ,0x8 }, + {0x900cf ,0x1d8 }, + {0x900d0 ,0x169 }, + {0x900d1 ,0x10 }, + {0x900d2 ,0x8558 }, + {0x900d3 ,0x168 }, + {0x900d4 ,0x70 }, + {0x900d5 ,0x788 }, + {0x900d6 ,0x16a }, + {0x900d7 ,0x1ff8 }, + {0x900d8 ,0x85a8 }, + {0x900d9 ,0x1e8 }, + {0x900da ,0x50 }, + {0x900db ,0x798 }, + {0x900dc ,0x16a }, + {0x900dd ,0x60 }, + {0x900de ,0x7a0 }, + {0x900df ,0x16a }, + {0x900e0 ,0x8 }, + {0x900e1 ,0x8310 }, + {0x900e2 ,0x168 }, + {0x900e3 ,0x8 }, + {0x900e4 ,0xa310 }, + {0x900e5 ,0x168 }, + {0x900e6 ,0xa }, + {0x900e7 ,0x408 }, + {0x900e8 ,0x169 }, + {0x900e9 ,0x6e }, + {0x900ea ,0x0 }, + {0x900eb ,0x68 }, + {0x900ec ,0x0 }, + {0x900ed ,0x408 }, + {0x900ee ,0x169 }, + {0x900ef ,0x0 }, + {0x900f0 ,0x8310 }, + {0x900f1 ,0x168 }, + {0x900f2 ,0x0 }, + {0x900f3 ,0xa310 }, + {0x900f4 ,0x168 }, + {0x900f5 ,0x1ff8 }, + {0x900f6 ,0x85a8 }, + {0x900f7 ,0x1e8 }, + {0x900f8 ,0x68 }, + {0x900f9 ,0x798 }, + {0x900fa ,0x16a }, + {0x900fb ,0x78 }, + {0x900fc ,0x7a0 }, + {0x900fd ,0x16a }, + {0x900fe ,0x68 }, + {0x900ff ,0x790 }, + {0x90100 ,0x16a }, + {0x90101 ,0x8 }, + {0x90102 ,0x8b10 }, + {0x90103 ,0x168 }, + {0x90104 ,0x8 }, + {0x90105 ,0xab10 }, + {0x90106 ,0x168 }, + {0x90107 ,0xa }, + {0x90108 ,0x408 }, + {0x90109 ,0x169 }, + {0x9010a ,0x58 }, + {0x9010b ,0x0 }, + {0x9010c ,0x68 }, + {0x9010d ,0x0 }, + {0x9010e ,0x408 }, + {0x9010f ,0x169 }, + {0x90110 ,0x0 }, + {0x90111 ,0x8b10 }, + {0x90112 ,0x168 }, + {0x90113 ,0x0 }, + {0x90114 ,0xab10 }, + {0x90115 ,0x168 }, + {0x90116 ,0x0 }, + {0x90117 ,0x1d8 }, + {0x90118 ,0x169 }, + {0x90119 ,0x80 }, + {0x9011a ,0x790 }, + {0x9011b ,0x16a }, + {0x9011c ,0x18 }, + {0x9011d ,0x7aa }, + {0x9011e ,0x6a }, + {0x9011f ,0xa }, + {0x90120 ,0x0 }, + {0x90121 ,0x1e9 }, + {0x90122 ,0x8 }, + {0x90123 ,0x8080 }, + {0x90124 ,0x108 }, + {0x90125 ,0xf }, + {0x90126 ,0x408 }, + {0x90127 ,0x169 }, + {0x90128 ,0xc }, + {0x90129 ,0x0 }, + {0x9012a ,0x68 }, + {0x9012b ,0x9 }, + {0x9012c ,0x0 }, + {0x9012d ,0x1a9 }, + {0x9012e ,0x0 }, + {0x9012f ,0x408 }, + {0x90130 ,0x169 }, + {0x90131 ,0x0 }, + {0x90132 ,0x8080 }, + {0x90133 ,0x108 }, + {0x90134 ,0x8 }, + {0x90135 ,0x7aa }, + {0x90136 ,0x6a }, + {0x90137 ,0x0 }, + {0x90138 ,0x8568 }, + {0x90139 ,0x108 }, + {0x9013a ,0xb7 }, + {0x9013b ,0x790 }, + {0x9013c ,0x16a }, + {0x9013d ,0x1f }, + {0x9013e ,0x0 }, + {0x9013f ,0x68 }, + {0x90140 ,0x8 }, + {0x90141 ,0x8558 }, + {0x90142 ,0x168 }, + {0x90143 ,0xf }, + {0x90144 ,0x408 }, + {0x90145 ,0x169 }, + {0x90146 ,0xc }, + {0x90147 ,0x0 }, + {0x90148 ,0x68 }, + {0x90149 ,0x0 }, + {0x9014a ,0x408 }, + {0x9014b ,0x169 }, + {0x9014c ,0x0 }, + {0x9014d ,0x8558 }, + {0x9014e ,0x168 }, + {0x9014f ,0x8 }, + {0x90150 ,0x3c8 }, + {0x90151 ,0x1a9 }, + {0x90152 ,0x3 }, + {0x90153 ,0x370 }, + {0x90154 ,0x129 }, + {0x90155 ,0x20 }, + {0x90156 ,0x2aa }, + {0x90157 ,0x9 }, + {0x90158 ,0x0 }, + {0x90159 ,0x400 }, + {0x9015a ,0x10e }, + {0x9015b ,0x8 }, + {0x9015c ,0xe8 }, + {0x9015d ,0x109 }, + {0x9015e ,0x0 }, + {0x9015f ,0x8140 }, + {0x90160 ,0x10c }, + {0x90161 ,0x10 }, + {0x90162 ,0x8138 }, + {0x90163 ,0x10c }, + {0x90164 ,0x8 }, + {0x90165 ,0x7c8 }, + {0x90166 ,0x101 }, + {0x90167 ,0x8 }, + {0x90168 ,0x0 }, + {0x90169 ,0x8 }, + {0x9016a ,0x8 }, + {0x9016b ,0x448 }, + {0x9016c ,0x109 }, + {0x9016d ,0xf }, + {0x9016e ,0x7c0 }, + {0x9016f ,0x109 }, + {0x90170 ,0x0 }, + {0x90171 ,0xe8 }, + {0x90172 ,0x109 }, + {0x90173 ,0x47 }, + {0x90174 ,0x630 }, + {0x90175 ,0x109 }, + {0x90176 ,0x8 }, + {0x90177 ,0x618 }, + {0x90178 ,0x109 }, + {0x90179 ,0x8 }, + {0x9017a ,0xe0 }, + {0x9017b ,0x109 }, + {0x9017c ,0x0 }, + {0x9017d ,0x7c8 }, + {0x9017e ,0x109 }, + {0x9017f ,0x8 }, + {0x90180 ,0x8140 }, + {0x90181 ,0x10c }, + {0x90182 ,0x0 }, + {0x90183 ,0x1 }, + {0x90184 ,0x8 }, + {0x90185 ,0x8 }, + {0x90186 ,0x4 }, + {0x90187 ,0x8 }, + {0x90188 ,0x8 }, + {0x90189 ,0x7c8 }, + {0x9018a ,0x101 }, + {0x90006 ,0x0 }, + {0x90007 ,0x0 }, + {0x90008 ,0x8 }, + {0x90009 ,0x0 }, + {0x9000a ,0x0 }, + {0x9000b ,0x0 }, + {0xd00e7 ,0x400 }, + {0x90017 ,0x0 }, + {0x9001f ,0x2a }, + {0x90026 ,0x6a }, + {0x400d0 ,0x0 }, + {0x400d1 ,0x101 }, + {0x400d2 ,0x105 }, + {0x400d3 ,0x107 }, + {0x400d4 ,0x10f }, + {0x400d5 ,0x202 }, + {0x400d6 ,0x20a }, + {0x400d7 ,0x20b }, + {0x2003a ,0x2 }, + {0x2000b ,0x5d }, + {0x2000c ,0xbb }, + {0x2000d ,0x753 }, + {0x2000e ,0x2c }, + {0x12000b ,0xc }, + {0x12000c ,0x19 }, + {0x12000d ,0xfa }, + {0x12000e ,0x10 }, + {0x22000b ,0x3 }, + {0x22000c ,0x6 }, + {0x22000d ,0x3e }, + {0x22000e ,0x10 }, + {0x9000c ,0x0 }, + {0x9000d ,0x173 }, + {0x9000e ,0x60 }, + {0x9000f ,0x6110 }, + {0x90010 ,0x2152 }, + {0x90011 ,0xdfbd }, + {0x90012 ,0x60 }, + {0x90013 ,0x6152 }, + {0x20010 ,0x5a }, + {0x20011 ,0x3 }, + {0x120010 ,0x5a }, + {0x120011 ,0x3 }, + {0x220010 ,0x5a }, + {0x220011 ,0x3 }, + {0x40080 ,0xe0 }, + {0x40081 ,0x12 }, + {0x40082 ,0xe0 }, + {0x40083 ,0x12 }, + {0x40084 ,0xe0 }, + {0x40085 ,0x12 }, + {0x140080 ,0xe0 }, + {0x140081 ,0x12 }, + {0x140082 ,0xe0 }, + {0x140083 ,0x12 }, + {0x140084 ,0xe0 }, + {0x140085 ,0x12 }, + {0x240080 ,0xe0 }, + {0x240081 ,0x12 }, + {0x240082 ,0xe0 }, + {0x240083 ,0x12 }, + {0x240084 ,0xe0 }, + {0x240085 ,0x12 }, + {0x400fd ,0xf }, + {0x10011 ,0x1 }, + {0x10012 ,0x1 }, + {0x10013 ,0x180 }, + {0x10018 ,0x1 }, + {0x10002 ,0x6209 }, + {0x100b2 ,0x1 }, + {0x101b4 ,0x1 }, + {0x102b4 ,0x1 }, + {0x103b4 ,0x1 }, + {0x104b4 ,0x1 }, + {0x105b4 ,0x1 }, + {0x106b4 ,0x1 }, + {0x107b4 ,0x1 }, + {0x108b4 ,0x1 }, + {0x11011 ,0x1 }, + {0x11012 ,0x1 }, + {0x11013 ,0x180 }, + {0x11018 ,0x1 }, + {0x11002 ,0x6209 }, + {0x110b2 ,0x1 }, + {0x111b4 ,0x1 }, + {0x112b4 ,0x1 }, + {0x113b4 ,0x1 }, + {0x114b4 ,0x1 }, + {0x115b4 ,0x1 }, + {0x116b4 ,0x1 }, + {0x117b4 ,0x1 }, + {0x118b4 ,0x1 }, + {0x12011 ,0x1 }, + {0x12012 ,0x1 }, + {0x12013 ,0x180 }, + {0x12018 ,0x1 }, + {0x12002 ,0x6209 }, + {0x120b2 ,0x1 }, + {0x121b4 ,0x1 }, + {0x122b4 ,0x1 }, + {0x123b4 ,0x1 }, + {0x124b4 ,0x1 }, + {0x125b4 ,0x1 }, + {0x126b4 ,0x1 }, + {0x127b4 ,0x1 }, + {0x128b4 ,0x1 }, + {0x13011 ,0x1 }, + {0x13012 ,0x1 }, + {0x13013 ,0x180 }, + {0x13018 ,0x1 }, + {0x13002 ,0x6209 }, + {0x130b2 ,0x1 }, + {0x131b4 ,0x1 }, + {0x132b4 ,0x1 }, + {0x133b4 ,0x1 }, + {0x134b4 ,0x1 }, + {0x135b4 ,0x1 }, + {0x136b4 ,0x1 }, + {0x137b4 ,0x1 }, + {0x138b4 ,0x1 }, + {0x2003a ,0x2 }, + {0xc0080 ,0x2 }, + {0xd0000 ,0x1 }Lines of this file are not shown. View the raw message.
board/kontron/imx/mx8mm/spl.c new file +330
-0Lines of this file are not shown. View the raw message.
configs/kontron_mx8mm_defconfig new file +124
-0Lines of this file are not shown. View the raw message.
include/configs/kontron_mx8mm.h new file +66
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Part of the diff is not shown here. View the raw message.