arm: vexpress64: juno: Enable distro_bootcmd functionality
PATCH 1/1 arm: vexpress64: juno: Enable distro_bootcmd functionality
The ARM Juno boards can be used as somewhat decent machines to run off-the-shelf distributions, with USB, SATA, GBit Ethernet and 8GB of DRAM.
With stable DTs in the board's NOR flash this would work really nicely, however the default boot command is to fetch a kernel and an initrd from the on-board NOR flash, which sounds somewhat embedded.
Include the config_distro_bootcmd.h header and define the available devices (starting with USB, to catch USB installer sticks) to make distributions and UEFI work out of the box.
The NOR flash kernel functionality is still preserved as the last resort, should all other methods fail.
--- include/configs/vexpress_aemv8a.h | 58 ++++++++++++++++++------------- 1 file changed, 34 insertions(+), 24 deletions(-)
include/configs/vexpress_aemv8a.h +34 -24
@@ -126,6 +126,39 @@/* Initial environment variables */ #ifdef CONFIG_TARGET_VEXPRESS64_JUNO +/* Copy the kernel and FDT to DRAM memory and boot */ +#define BOOTENV_DEV_AFS (devtypeu, devtypel, instance) \ + "bootcmd_afs=" \ + "afs load ${kernel_name} ${kernel_addr_r} ;"\ + "if test $? -eq 1; then "\ + " echo Loading ${kernel_alt_name} instead of ${kernel_name}; "\ + " afs load ${kernel_alt_name} ${kernel_addr_r};"\ + "fi ; "\ + "afs load ${fdtfile} ${fdt_addr_r} ;"\ + "if test $? -eq 1; then "\ + " echo Loading ${fdt_alt_name} instead of ${fdtfile}; "\ + " afs load ${fdt_alt_name} ${fdt_addr_r}; "\ + "fi ; "\ + "fdt addr ${fdt_addr_r}; fdt resize; " \ + "if afs load ${ramdisk_name} ${ramdisk_addr_r} ; "\ + "then "\ + " setenv ramdisk_param ${ramdisk_addr_r}; "\ + "else "\ + " setenv ramdisk_param -; "\ + "fi ; " \ + "booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}\0" +#define BOOTENV_DEV_NAME_AFS (devtypeu, devtypel, instance) "afs " + +#define BOOT_TARGET_DEVICES (func) \ + func(USB, usb, 0) \ + func(SATA, sata, 0) \ + func(SATA, sata, 1) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) \ + func(AFS, afs, na) + +#include <config_distro_bootcmd.h> +/* * Defines where the kernel and FDT exist in NOR flash and where it will * be copied into DRAM
@@ -139,30 +172,7 @@"fdtfile=board.dtb\0" \"fdt_alt_name=juno\0" \"fdt_addr_r=0x80000000\0" \ - -#ifndef CONFIG_BOOTCOMMAND -/* Copy the kernel and FDT to DRAM memory and boot */ -#define CONFIG_BOOTCOMMAND "afs load ${kernel_name} ${kernel_addr_r} ;"\ - "if test $? -eq 1; then "\ - " echo Loading ${kernel_alt_name} instead of "\ - "${kernel_name}; "\ - " afs load ${kernel_alt_name} ${kernel_addr_r};"\ - "fi ; "\ - "afs load ${fdtfile} ${fdt_addr_r} ;"\ - "if test $? -eq 1; then "\ - " echo Loading ${fdt_alt_name} instead of "\ - "${fdtfile}; "\ - " afs load ${fdt_alt_name} ${fdt_addr_r}; "\ - "fi ; "\ - "fdt addr ${fdt_addr_r}; fdt resize; " \ - "if afs load ${ramdisk_name} ${ramdisk_addr_r} ; "\ - "then "\ - " setenv ramdisk_param ${ramdisk_addr_r}; "\ - " else setenv ramdisk_param -; "\ - "fi ; " \ - "booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}" -#endif - + BOOTENV#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP #define CONFIG_EXTRA_ENV_SETTINGS \
Signature · 1 line
2.17.5
Quoted 15 lines · Andre Przywara
The ARM Juno boards can be used as somewhat decent machines to run off-the-shelf distributions, with USB, SATA, GBit Ethernet and 8GB of DRAM.
With stable DTs in the board's NOR flash this would work really nicely, however the default boot command is to fetch a kernel and an initrd from the on-board NOR flash, which sounds somewhat embedded.
Include the
config_distro_bootcmd.hheader and define the available devices (starting with USB, to catch USB installer sticks) to make distributions and UEFI work out of the box.
The NOR flash kernel functionality is still preserved as the last resort, should all other methods fail.
Quoted 4 lines
Signed-off-by Andre Przywara <[email protected]>--- include/configs/vexpress_aemv8a.h | 58 ++++++++++++++++++------------- 1 file changed, 34 insertions(+), 24 deletions(-)
Quoted 8 lines · Andre Przywara
The ARM Juno boards can be used as somewhat decent machines to run off-the-shelf distributions, with USB, SATA, GBit Ethernet and 8GB of DRAM.
With stable DTs in the board's NOR flash this would work really nicely, however the default boot command is to fetch a kernel and an initrd from the on-board NOR flash, which sounds somewhat embedded.
Quoted 7 lines
Include the
config_distro_bootcmd.hheader and define the available devices (starting with USB, to catch USB installer sticks) to make distributions and UEFI work out of the box.
The NOR flash kernel functionality is still preserved as the last resort, should all other methods fail.Signed-off-by Andre Przywara <[email protected]>
Looks helpful!
Yours,
Linus Walleij
Quoted 14 lines · Andre Przywara
The ARM Juno boards can be used as somewhat decent machines to run off-the-shelf distributions, with USB, SATA, GBit Ethernet and 8GB of DRAM.
With stable DTs in the board's NOR flash this would work really nicely, however the default boot command is to fetch a kernel and an initrd from the on-board NOR flash, which sounds somewhat embedded.
Include the
config_distro_bootcmd.hheader and define the available devices (starting with USB, to catch USB installer sticks) to make distributions and UEFI work out of the box.
The NOR flash kernel functionality is still preserved as the last resort, should all other methods fail.
Quoted 3 lines
Signed-off-by Andre Przywara <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Linus Walleij <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom