Skip to contentSkip to conversation

5.4.132-rc1 review

PATCH In review Greg Kroah-Hartman 5 participants 356 messages Jul 12, 2021 Page 2 of 3

Subsystems (5)
lore
Share & tools
lore
author maintainer
#169 lore raw

PATCH 169/348 btrfs: clear log tree recovering status if starting transaction fails

In reply to Greg Kroah-Hartman

From: David Sterba <[email protected]>

[ Upstream commit 1aeb6b563aea18cd55c73cf666d1d3245a00f08c ]

When a log recovery is in progress, lots of operations have to take that into account, so we keep this status per tree during the operation. Long time ago error handling revamp patch 79787eaab461 ("btrfs: replace many BUG_ONs with proper error handling") removed clearing of the status in an error branch. Add it back as was intended in e02119d5a7b4 ("Btrfs:
Add a write ahead tree log to optimize synchronous operations").

There are probably no visible effects, log replay is done only during mount and if it fails all structures are cleared so the stale status won't be kept.

Fixes 79787eaab461 ("btrfs: replace many BUG_ONs with proper error handling")
---
 fs/btrfs/tree-log.c | 1 +
 1 file changed, 1 insertion(+)
fs/btrfs/tree-log.c +1 -0
index 4ff381c23cef..afc6731bb692 100644
@@ -6327,6 +6327,7 @@ next:
 error:
 	if (wc.trans)
 		btrfs_end_transaction(wc.trans);
+	clear_bit(BTRFS_FS_LOG_RECOVERING, &fs_info->flags);
 	btrfs_free_path(path);
 	return ret;
 }
Signature · 1 line
2.30.2
author maintainer
#170 lore raw

PATCH 170/348 sched/rt: Fix RT utilization tracking during policy change

In reply to Greg Kroah-Hartman

From: Vincent Donnefort <[email protected]>

[ Upstream commit fecfcbc288e9f4923f40fd23ca78a6acdc7fdf6c ]

RT keeps track of the utilization on a per-rq basis with the structure avg_rt. This utilization is updated during task_tick_rt(), put_prev_task_rt() and set_next_task_rt(). However, when the current running task changes its policy, set_next_task_rt() which would usually take care of updating the utilization when the rq starts running RT tasks, will not see a such change, leaving the avg_rt structure outdated. When that very same task will be dequeued later, put_prev_task_rt() will then update the utilization, based on a wrong last_update_time, leading to a huge spike in the RT utilization signal.

The signal would eventually recover from this issue after few ms. Even if no RT tasks are run, avg_rt is also updated in __update_blocked_others(). But as the CPU capacity depends partly on the avg_rt, this issue has nonetheless a significant impact on the scheduler.

Fix this issue by ensuring a load update when a running task changes its policy to RT.

---
 kernel/sched/rt.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
kernel/sched/rt.c +12 -5
index 5b04bba4500d..2dffb8762e16 100644
@@ -2221,13 +2221,20 @@ void __init init_sched_rt_class(void)
 static void switched_to_rt(struct rq *rq, struct task_struct *p)
 {
 	/*
-	 * If we are already running, then there's nothing
-	 * that needs to be done. But if we are not running
-	 * we may need to preempt the current running task.
-	 * If that current running task is also an RT task
+	 * If we are running, update the avg_rt tracking, as the running time
+	 * will now on be accounted into the latter.
+	 */
+	if (task_current(rq, p)) {
+		update_rt_rq_load_avg(rq_clock_pelt(rq), rq, 0);
+		return;
+	}
+
+	/*
+	 * If we are not running we may need to preempt the current
+	 * running task. If that current running task is also an RT task
 	 * then see if we can move to another run queue.
 	 */
-	if (task_on_rq_queued(p) && rq->curr != p) {
+	if (task_on_rq_queued(p)) {
 #ifdef CONFIG_SMP
 		if (p->nr_cpus_allowed > 1 && rq->rt.overloaded)
 			rt_queue_push_tasks(rq);
Signature · 1 line
2.30.2
author maintainer
#171 lore raw

PATCH 171/348 sched/rt: Fix Deadline utilization tracking during policy change

In reply to Greg Kroah-Hartman

From: Vincent Donnefort <[email protected]>

[ Upstream commit d7d607096ae6d378b4e92d49946d22739c047d4c ]

DL keeps track of the utilization on a per-rq basis with the structure avg_dl. This utilization is updated during task_tick_dl(), put_prev_task_dl() and set_next_task_dl(). However, when the current running task changes its policy, set_next_task_dl() which would usually take care of updating the utilization when the rq starts running DL tasks, will not see a such change, leaving the avg_dl structure outdated. When that very same task will be dequeued later, put_prev_task_dl() will then update the utilization, based on a wrong last_update_time, leading to a huge spike in the DL utilization signal.

The signal would eventually recover from this issue after few ms. Even if no DL tasks are run, avg_dl is also updated in __update_blocked_others(). But as the CPU capacity depends partly on the avg_dl, this issue has nonetheless a significant impact on the scheduler.

Fix this issue by ensuring a load update when a running task changes its policy to DL.

---
 kernel/sched/deadline.c | 2 ++
 1 file changed, 2 insertions(+)
kernel/sched/deadline.c +2 -0
index 4ce8c11e5e4a..3cf776d5bce8 100644
@@ -2392,6 +2392,8 @@ static void switched_to_dl(struct rq *rq, struct task_struct *p)
 			check_preempt_curr_dl(rq, p, 0);
 		else
 			resched_curr(rq);
+	} else {
+		update_dl_rq_load_avg(rq_clock_pelt(rq), rq, 0);
 	}
 }
 
Signature · 1 line
2.30.2
author maintainer
#172 lore raw

PATCH 172/348 sched/uclamp: Fix uclamp_tg_restrict()

In reply to Greg Kroah-Hartman

From: Qais Yousef <[email protected]>

[ Upstream commit 0213b7083e81f4acd69db32cb72eb4e5f220329a ]

Now cpu.uclamp.min acts as a protection, we need to make sure that the uclamp request of the task is within the allowed range of the cgroup, that is it is clamp()'ed correctly by tg->uclamp[UCLAMP_MIN] and tg->uclamp[UCLAMP_MAX].

As reported by Xuewen [1] we can have some corner cases where there's inversion between uclamp requested by task (p) and the uclamp values of the taskgroup it's attached to (tg). Following table demonstrates 2 corner cases:

	           |  p  |  tg  |  effective
	-----------+-----+------+-----------
	CASE 1
	-----------+-----+------+-----------
	uclamp_min | 60% | 0%   |  60%
	-----------+-----+------+-----------
	uclamp_max | 80% | 50%  |  50%
	-----------+-----+------+-----------
	CASE 2
	-----------+-----+------+-----------
	uclamp_min | 0%  | 30%  |  30%
	-----------+-----+------+-----------
	uclamp_max | 20% | 50%  |  20%
	-----------+-----+------+-----------

With this fix we get:

	           |  p  |  tg  |  effective
	-----------+-----+------+-----------
	CASE 1
	-----------+-----+------+-----------
	uclamp_min | 60% | 0%   |  50%
	-----------+-----+------+-----------
	uclamp_max | 80% | 50%  |  50%
	-----------+-----+------+-----------
	CASE 2
	-----------+-----+------+-----------
	uclamp_min | 0%  | 30%  |  30%
	-----------+-----+------+-----------
	uclamp_max | 20% | 50%  |  30%
	-----------+-----+------+-----------

Additionally uclamp_update_active_tasks() must now unconditionally update both UCLAMP_MIN/MAX because changing the tg's UCLAMP_MAX for instance could have an impact on the effective UCLAMP_MIN of the tasks.

	           |  p  |  tg  |  effective
	-----------+-----+------+-----------
	old
	-----------+-----+------+-----------
	uclamp_min | 60% | 0%   |  50%
	-----------+-----+------+-----------
	uclamp_max | 80% | 50%  |  50%
	-----------+-----+------+-----------
	*new*
	-----------+-----+------+-----------
	uclamp_min | 60% | 0%   | *60%*
	-----------+-----+------+-----------
	uclamp_max | 80% |*70%* | *70%*
	-----------+-----+------+-----------

[1] https://lore.kernel.org/lkml/CAB8ipk_a6VFNjiEnHRHkUMBKbA+qzPQvhtNjJ_YNzQhqV_o8Zw@mail.gmail.com/

Fixes 0c18f2ecfcc2 ("sched/uclamp: Fix wrong implementation of cpu.uclamp.min")
---
 kernel/sched/core.c | 49 +++++++++++++++++----------------------------
 1 file changed, 18 insertions(+), 31 deletions(-)
kernel/sched/core.c +18 -31
index b23e70db3b6e..8294debf68c4 100644
@@ -894,8 +894,10 @@ unsigned int uclamp_rq_max_value(struct rq *rq, enum uclamp_id clamp_id,
 static inline struct uclamp_se
 uclamp_tg_restrict(struct task_struct *p, enum uclamp_id clamp_id)
 {
+	/* Copy by value as we could modify it */
 	struct uclamp_se uc_req = p->uclamp_req[clamp_id];
 #ifdef CONFIG_UCLAMP_TASK_GROUP
+	unsigned int tg_min, tg_max, value;
 
 	/*
 	 * Tasks in autogroups or root task group will be
@@ -906,23 +908,11 @@ uclamp_tg_restrict(struct task_struct *p, enum uclamp_id clamp_id)
 	if (task_group(p) == &root_task_group)
 		return uc_req;
 
-	switch (clamp_id) {
-	case UCLAMP_MIN: {
-		struct uclamp_se uc_min = task_group(p)->uclamp[clamp_id];
-		if (uc_req.value < uc_min.value)
-			return uc_min;
-		break;
-	}
-	case UCLAMP_MAX: {
-		struct uclamp_se uc_max = task_group(p)->uclamp[clamp_id];
-		if (uc_req.value > uc_max.value)
-			return uc_max;
-		break;
-	}
-	default:
-		WARN_ON_ONCE(1);
-		break;
-	}
+	tg_min = task_group(p)->uclamp[UCLAMP_MIN].value;
+	tg_max = task_group(p)->uclamp[UCLAMP_MAX].value;
+	value = uc_req.value;
+	value = clamp(value, tg_min, tg_max);
+	uclamp_se_set(&uc_req, value, false);
 #endif
 
 	return uc_req;
@@ -1121,8 +1111,9 @@ static inline void uclamp_rq_dec(struct rq *rq, struct task_struct *p)
 }
 
 static inline void
-uclamp_update_active(struct task_struct *p, enum uclamp_id clamp_id)
+uclamp_update_active(struct task_struct *p)
 {
+	enum uclamp_id clamp_id;
 	struct rq_flags rf;
 	struct rq *rq;
 
@@ -1142,9 +1133,11 @@ uclamp_update_active(struct task_struct *p, enum uclamp_id clamp_id)
 	 * affecting a valid clamp bucket, the next time it's enqueued,
 	 * it will already see the updated clamp bucket value.
 	 */
-	if (p->uclamp[clamp_id].active) {
-		uclamp_rq_dec_id(rq, p, clamp_id);
-		uclamp_rq_inc_id(rq, p, clamp_id);
+	for_each_clamp_id(clamp_id) {
+		if (p->uclamp[clamp_id].active) {
+			uclamp_rq_dec_id(rq, p, clamp_id);
+			uclamp_rq_inc_id(rq, p, clamp_id);
+		}
 	}
 
 	task_rq_unlock(rq, p, &rf);
@@ -1152,20 +1145,14 @@ uclamp_update_active(struct task_struct *p, enum uclamp_id clamp_id)
 
 #ifdef CONFIG_UCLAMP_TASK_GROUP
 static inline void
-uclamp_update_active_tasks(struct cgroup_subsys_state *css,
-			   unsigned int clamps)
+uclamp_update_active_tasks(struct cgroup_subsys_state *css)
 {
-	enum uclamp_id clamp_id;
 	struct css_task_iter it;
 	struct task_struct *p;
 
 	css_task_iter_start(css, 0, &it);
-	while ((p = css_task_iter_next(&it))) {
-		for_each_clamp_id(clamp_id) {
-			if ((0x1 << clamp_id) & clamps)
-				uclamp_update_active(p, clamp_id);
-		}
-	}
+	while ((p = css_task_iter_next(&it)))
+		uclamp_update_active(p);
 	css_task_iter_end(&it);
 }
 
@@ -7328,7 +7315,7 @@ static void cpu_util_update_eff(struct cgroup_subsys_state *css)
 		}
 
 		/* Immediately update descendants RUNNABLE tasks */
-		uclamp_update_active_tasks(css, clamps);
+		uclamp_update_active_tasks(css);
 	}
 }
 
Signature · 1 line
2.30.2
author maintainer
#173 lore raw

PATCH 173/348 spi: spi-sun6i: Fix chipselect/clock bug

In reply to Greg Kroah-Hartman

From: Mirko Vogt <mirko-dev|[email protected]>

[ Upstream commit 0d7993b234c9fad8cb6bec6adfaa74694ba85ecb ]

The current sun6i SPI implementation initializes the transfer too early, resulting in SCK going high before the transfer. When using an additional (gpio) chipselect with sun6i, the chipselect is asserted at a time when clock is high, making the SPI transfer fail.

This is due to SUN6I_GBL_CTL_BUS_ENABLE being written into SUN6I_GBL_CTL_REG at an early stage. Moving that to the transfer function, hence, right before the transfer starts, mitigates that problem.

Fixes 3558fe900e8af (spi: sunxi: Add Allwinner A31 SPI controller driver)
---
 drivers/spi/spi-sun6i.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/spi/spi-sun6i.c +5 -1
index 956df79035d5..3a8acd78308f 100644
@@ -297,6 +297,10 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
 	}
 
 	sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
+	/* Finally enable the bus - doing so before might raise SCK to HIGH */
+	reg = sun6i_spi_read(sspi, SUN6I_GBL_CTL_REG);
+	reg |= SUN6I_GBL_CTL_BUS_ENABLE;
+	sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG, reg);
 
 	/* Setup the transfer now... */
 	if (sspi->tx_buf)
@@ -405,7 +409,7 @@ static int sun6i_spi_runtime_resume(struct device *dev)
 	}
 
 	sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG,
-			SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
+			SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
 
 	return 0;
 
Signature · 1 line
2.30.2
author maintainer
#174 lore raw

PATCH 174/348 crypto: nx - Fix RCU warning in nx842_OF_upd_status

In reply to Greg Kroah-Hartman

From: Herbert Xu <[email protected]>

[ Upstream commit 2a96726bd0ccde4f12b9b9a9f61f7b1ac5af7e10 ]

The function nx842_OF_upd_status triggers a sparse RCU warning when it directly dereferences the RCU-protected devdata. This appears to be an accident as there was another variable of the same name that was passed in from the caller.

After it was removed (because the main purpose of using it, to update the status member was itself removed) the global variable unintenionally stood in as its replacement.

This patch restores the devdata parameter.

Fixes 90fd73f912f0 ("crypto: nx - remove pSeries NX 'status' field")
---
 drivers/crypto/nx/nx-842-pseries.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/crypto/nx/nx-842-pseries.c +5 -3
index 258c5e38a551..c5ec50a28f30 100644
@@ -538,13 +538,15 @@ static int nx842_OF_set_defaults(struct nx842_devdata *devdata)
  * The status field indicates if the device is enabled when the status
  * is 'okay'.  Otherwise the device driver will be disabled.
  *
- * @prop - struct property point containing the maxsyncop for the update
+ * @devdata: struct nx842_devdata to use for dev_info
+ * @prop: struct property point containing the maxsyncop for the update
  *
  * Returns:
  *  0 - Device is available
  *  -ENODEV - Device is not available
  */
-static int nx842_OF_upd_status(struct property *prop)
+static int nx842_OF_upd_status(struct nx842_devdata *devdata,
+			       struct property *prop)
 {
 	const char *status = (const char *)prop->value;
 
@@ -758,7 +760,7 @@ static int nx842_OF_upd(struct property *new_prop)
 		goto out;
 
 	/* Perform property updates */
-	ret = nx842_OF_upd_status(status);
+	ret = nx842_OF_upd_status(new_devdata, status);
 	if (ret)
 		goto error_out;
 
Signature · 1 line
2.30.2
author maintainer
#175 lore raw

PATCH 175/348 ACPI: sysfs: Fix a buffer overrun problem with description_show()

In reply to Greg Kroah-Hartman

From: Krzysztof Wilczyński <[email protected]>

[ Upstream commit 888be6067b97132c3992866bbcf647572253ab3f ]

Currently, a device description can be obtained using ACPI, if the _STR method exists for a particular device, and then exposed to the userspace via a sysfs object as a string value.

If the _STR method is available for a given device then the data (usually a Unicode string) is read and stored in a buffer (of the ACPI_TYPE_BUFFER type) with a pointer to said buffer cached in the struct acpi_device_pnp for later access.

The description_show() function is responsible for exposing the device description to the userspace via a corresponding sysfs object and internally calls the utf16s_to_utf8s() function with a pointer to the buffer that contains the Unicode string so that it can be converted from UTF16 encoding to UTF8 and thus allowing for the value to be safely stored and later displayed.

When invoking the utf16s_to_utf8s() function, the description_show() function also sets a limit of the data that can be saved into a provided buffer as a result of the character conversion to be a total of PAGE_SIZE, and upon completion, the utf16s_to_utf8s() function returns an integer value denoting the number of bytes that have been written into the provided buffer.

Following the execution of the utf16s_to_utf8s() a newline character will be added at the end of the resulting buffer so that when the value is read in the userspace through the sysfs object then it would include newline making it more accessible when working with the sysfs file system in the shell, etc. Normally, this wouldn't be a problem, but if the function utf16s_to_utf8s() happens to return the number of bytes written to be precisely PAGE_SIZE, then we would overrun the buffer and write the newline character outside the allotted space which can have undefined consequences or result in a failure.

To fix this buffer overrun, ensure that there always is enough space left for the newline character to be safely appended.

Fixes d1efe3c324ea ("ACPI: Add new sysfs interface to export device description")
---
 drivers/acpi/device_sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/acpi/device_sysfs.c +1 -1
index bfca116482b8..75e412b2b660 100644
@@ -446,7 +446,7 @@ static ssize_t description_show(struct device *dev,
 		(wchar_t *)acpi_dev->pnp.str_obj->buffer.pointer,
 		acpi_dev->pnp.str_obj->buffer.length,
 		UTF16_LITTLE_ENDIAN, buf,
-		PAGE_SIZE);
+		PAGE_SIZE - 1);
 
 	buf[result++] = '\n';
 
Signature · 1 line
2.30.2
author maintainer
#176 lore raw

PATCH 176/348 extcon: extcon-max8997: Fix IRQ freeing at error path

In reply to Greg Kroah-Hartman

From: Matti Vaittinen <[email protected]>

[ Upstream commit 610bdc04830a864115e6928fc944f1171dfff6f3 ]

If reading MAX8997_MUIC_REG_STATUS1 fails at probe the driver exits without freeing the requested IRQs.

Free the IRQs prior returning if reading the status fails.

---
 drivers/extcon/extcon-max8997.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/extcon/extcon-max8997.c +1 -1
index 172e116ac1ce..ac1633adb55d 100644
@@ -729,7 +729,7 @@ static int max8997_muic_probe(struct platform_device *pdev)
 				2, info->status);
 	if (ret) {
 		dev_err(info->dev, "failed to read MUIC register\n");
-		return ret;
+		goto err_irq;
 	}
 	cable_type = max8997_muic_get_cable_type(info,
 					   MAX8997_CABLE_GROUP_ADC, &attached);
Signature · 1 line
2.30.2
author maintainer
#177 lore raw

PATCH 177/348 blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()

In reply to Greg Kroah-Hartman

From: Zhang Yi <[email protected]>

[ Upstream commit 1d0903d61e9645c6330b94247b96dd873dfc11c8 ]

Now that we disable wbt by simply zero out rwb->wb_normal in wbt_disable_default() when switch elevator to bfq, but it's not safe because it will become false positive if we change queue depth. If it become false positive between wbt_wait() and wbt_track() when submit write request, it will lead to drop rqw->inflight to -1 in wbt_done(), which will end up trigger IO hung. Fix this issue by introduce a new state which mean the wbt was disabled.

Fixes a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt")
---
 block/blk-wbt.c | 5 +++--
 block/blk-wbt.h | 1 +
 2 files changed, 4 insertions(+), 2 deletions(-)
block/blk-wbt.c +3 -2
index 8641ba9793c5..7c7dd5c14391 100644
@@ -77,7 +77,8 @@ enum {
 
 static inline bool rwb_enabled(struct rq_wb *rwb)
 {
-	return rwb && rwb->wb_normal != 0;
+	return rwb && rwb->enable_state != WBT_STATE_OFF_DEFAULT &&
+		      rwb->wb_normal != 0;
 }
 
 static void wb_timestamp(struct rq_wb *rwb, unsigned long *var)
@@ -710,7 +711,7 @@ void wbt_disable_default(struct request_queue *q)
 	rwb = RQWB(rqos);
 	if (rwb->enable_state == WBT_STATE_ON_DEFAULT) {
 		blk_stat_deactivate(rwb->cb);
-		rwb->wb_normal = 0;
+		rwb->enable_state = WBT_STATE_OFF_DEFAULT;
 	}
 }
 EXPORT_SYMBOL_GPL(wbt_disable_default);
block/blk-wbt.h +1 -0
index 8e4e37660971..d8d9f41b42f9 100644
@@ -34,6 +34,7 @@ enum {
 enum {
 	WBT_STATE_ON_DEFAULT	= 1,
 	WBT_STATE_ON_MANUAL	= 2,
+	WBT_STATE_OFF_DEFAULT
 };
 
 struct rq_wb {
Signature · 1 line
2.30.2
author maintainer
#178 lore raw

PATCH 178/348 blk-wbt: make sure throttle is enabled properly

In reply to Greg Kroah-Hartman

From: Zhang Yi <[email protected]>

[ Upstream commit 76a8040817b4b9c69b53f9b326987fa891b4082a ]

After commit a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt"), if throttle was disabled by wbt_disable_default(), we could not enable again, fix this by set enable_state back to WBT_STATE_ON_DEFAULT.

Fixes a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt")
---
 block/blk-wbt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
block/blk-wbt.c +5 -1
index 7c7dd5c14391..ee708c1bc352 100644
@@ -645,9 +645,13 @@ void wbt_set_write_cache(struct request_queue *q, bool write_cache_on)
 void wbt_enable_default(struct request_queue *q)
 {
 	struct rq_qos *rqos = wbt_rq_qos(q);
+
 	/* Throttling already enabled? */
-	if (rqos)
+	if (rqos) {
+		if (RQWB(rqos)->enable_state == WBT_STATE_OFF_DEFAULT)
+			RQWB(rqos)->enable_state = WBT_STATE_ON_DEFAULT;
 		return;
+	}
 
 	/* Queue not registered? Maybe shutting down... */
 	if (!blk_queue_registered(q))
Signature · 1 line
2.30.2
author maintainer
#179 lore raw

PATCH 179/348 ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros

In reply to Greg Kroah-Hartman

From: Dwaipayan Ray <[email protected]>

[ Upstream commit 0f39ee8324e75c9d370e84a61323ceb194641a18 ]

Instead of open coding DEVICE_ATTR(), use the DEVICE_ATTR_RW(), DEVICE_ATTR_RO() and DEVICE_ATTR_WO() macros wherever possible.

This required a few functions to be renamed but the functionality itself is unchanged.

---
 drivers/acpi/acpi_pad.c     | 24 ++++++++------------
 drivers/acpi/acpi_tad.c     | 14 ++++++------
 drivers/acpi/bgrt.c         | 20 ++++++++---------
 drivers/acpi/device_sysfs.c | 44 ++++++++++++++++++-------------------
 drivers/acpi/dock.c         | 26 +++++++++++-----------
 drivers/acpi/power.c        |  9 ++++----
 6 files changed, 66 insertions(+), 71 deletions(-)
drivers/acpi/acpi_pad.c +9 -15
index e7dc0133f817..c11d736a8db7 100644
@@ -262,7 +262,7 @@ static uint32_t acpi_pad_idle_cpus_num(void)
 	return ps_tsk_num;
 }
 
-static ssize_t acpi_pad_rrtime_store(struct device *dev,
+static ssize_t rrtime_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	unsigned long num;
@@ -276,16 +276,14 @@ static ssize_t acpi_pad_rrtime_store(struct device *dev,
 	return count;
 }
 
-static ssize_t acpi_pad_rrtime_show(struct device *dev,
+static ssize_t rrtime_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 	return scnprintf(buf, PAGE_SIZE, "%d\n", round_robin_time);
 }
-static DEVICE_ATTR(rrtime, S_IRUGO|S_IWUSR,
-	acpi_pad_rrtime_show,
-	acpi_pad_rrtime_store);
+static DEVICE_ATTR_RW(rrtime);
 
-static ssize_t acpi_pad_idlepct_store(struct device *dev,
+static ssize_t idlepct_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	unsigned long num;
@@ -299,16 +297,14 @@ static ssize_t acpi_pad_idlepct_store(struct device *dev,
 	return count;
 }
 
-static ssize_t acpi_pad_idlepct_show(struct device *dev,
+static ssize_t idlepct_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 	return scnprintf(buf, PAGE_SIZE, "%d\n", idle_pct);
 }
-static DEVICE_ATTR(idlepct, S_IRUGO|S_IWUSR,
-	acpi_pad_idlepct_show,
-	acpi_pad_idlepct_store);
+static DEVICE_ATTR_RW(idlepct);
 
-static ssize_t acpi_pad_idlecpus_store(struct device *dev,
+static ssize_t idlecpus_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	unsigned long num;
@@ -320,16 +316,14 @@ static ssize_t acpi_pad_idlecpus_store(struct device *dev,
 	return count;
 }
 
-static ssize_t acpi_pad_idlecpus_show(struct device *dev,
+static ssize_t idlecpus_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 	return cpumap_print_to_pagebuf(false, buf,
 				       to_cpumask(pad_busy_cpus_bits));
 }
 
-static DEVICE_ATTR(idlecpus, S_IRUGO|S_IWUSR,
-	acpi_pad_idlecpus_show,
-	acpi_pad_idlecpus_store);
+static DEVICE_ATTR_RW(idlecpus);
 
 static int acpi_pad_add_sysfs(struct acpi_device *device)
 {
drivers/acpi/acpi_tad.c +7 -7
index 33a4bcdaa4d7..bab8583443a6 100644
@@ -237,7 +237,7 @@ static ssize_t time_show(struct device *dev, struct device_attribute *attr,
 		       rt.tz, rt.daylight);
 }
 
-static DEVICE_ATTR(time, S_IRUSR | S_IWUSR, time_show, time_store);
+static DEVICE_ATTR_RW(time);
 
 static struct attribute *acpi_tad_time_attrs[] = {
 	&dev_attr_time.attr,
@@ -446,7 +446,7 @@ static ssize_t ac_alarm_show(struct device *dev, struct device_attribute *attr,
 	return acpi_tad_alarm_read(dev, buf, ACPI_TAD_AC_TIMER);
 }
 
-static DEVICE_ATTR(ac_alarm, S_IRUSR | S_IWUSR, ac_alarm_show, ac_alarm_store);
+static DEVICE_ATTR_RW(ac_alarm);
 
 static ssize_t ac_policy_store(struct device *dev, struct device_attribute *attr,
 			       const char *buf, size_t count)
@@ -462,7 +462,7 @@ static ssize_t ac_policy_show(struct device *dev, struct device_attribute *attr,
 	return acpi_tad_policy_read(dev, buf, ACPI_TAD_AC_TIMER);
 }
 
-static DEVICE_ATTR(ac_policy, S_IRUSR | S_IWUSR, ac_policy_show, ac_policy_store);
+static DEVICE_ATTR_RW(ac_policy);
 
 static ssize_t ac_status_store(struct device *dev, struct device_attribute *attr,
 			       const char *buf, size_t count)
@@ -478,7 +478,7 @@ static ssize_t ac_status_show(struct device *dev, struct device_attribute *attr,
 	return acpi_tad_status_read(dev, buf, ACPI_TAD_AC_TIMER);
 }
 
-static DEVICE_ATTR(ac_status, S_IRUSR | S_IWUSR, ac_status_show, ac_status_store);
+static DEVICE_ATTR_RW(ac_status);
 
 static struct attribute *acpi_tad_attrs[] = {
 	&dev_attr_caps.attr,
@@ -505,7 +505,7 @@ static ssize_t dc_alarm_show(struct device *dev, struct device_attribute *attr,
 	return acpi_tad_alarm_read(dev, buf, ACPI_TAD_DC_TIMER);
 }
 
-static DEVICE_ATTR(dc_alarm, S_IRUSR | S_IWUSR, dc_alarm_show, dc_alarm_store);
+static DEVICE_ATTR_RW(dc_alarm);
 
 static ssize_t dc_policy_store(struct device *dev, struct device_attribute *attr,
 			       const char *buf, size_t count)
@@ -521,7 +521,7 @@ static ssize_t dc_policy_show(struct device *dev, struct device_attribute *attr,
 	return acpi_tad_policy_read(dev, buf, ACPI_TAD_DC_TIMER);
 }
 
-static DEVICE_ATTR(dc_policy, S_IRUSR | S_IWUSR, dc_policy_show, dc_policy_store);
+static DEVICE_ATTR_RW(dc_policy);
 
 static ssize_t dc_status_store(struct device *dev, struct device_attribute *attr,
 			       const char *buf, size_t count)
@@ -537,7 +537,7 @@ static ssize_t dc_status_show(struct device *dev, struct device_attribute *attr,
 	return acpi_tad_status_read(dev, buf, ACPI_TAD_DC_TIMER);
 }
 
-static DEVICE_ATTR(dc_status, S_IRUSR | S_IWUSR, dc_status_show, dc_status_store);
+static DEVICE_ATTR_RW(dc_status);
 
 static struct attribute *acpi_tad_dc_attrs[] = {
 	&dev_attr_dc_alarm.attr,
drivers/acpi/bgrt.c +10 -10
index 251f961c28cc..19bb7f870204 100644
@@ -15,40 +15,40 @@
 static void *bgrt_image;
 static struct kobject *bgrt_kobj;
 
-static ssize_t show_version(struct device *dev,
+static ssize_t version_show(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab.version);
 }
-static DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
+static DEVICE_ATTR_RO(version);
 
-static ssize_t show_status(struct device *dev,
+static ssize_t status_show(struct device *dev,
 			   struct device_attribute *attr, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab.status);
 }
-static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+static DEVICE_ATTR_RO(status);
 
-static ssize_t show_type(struct device *dev,
+static ssize_t type_show(struct device *dev,
 			 struct device_attribute *attr, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab.image_type);
 }
-static DEVICE_ATTR(type, S_IRUGO, show_type, NULL);
+static DEVICE_ATTR_RO(type);
 
-static ssize_t show_xoffset(struct device *dev,
+static ssize_t xoffset_show(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab.image_offset_x);
 }
-static DEVICE_ATTR(xoffset, S_IRUGO, show_xoffset, NULL);
+static DEVICE_ATTR_RO(xoffset);
 
-static ssize_t show_yoffset(struct device *dev,
+static ssize_t yoffset_show(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab.image_offset_y);
 }
-static DEVICE_ATTR(yoffset, S_IRUGO, show_yoffset, NULL);
+static DEVICE_ATTR_RO(yoffset);
 
 static ssize_t image_read(struct file *file, struct kobject *kobj,
 	       struct bin_attribute *attr, char *buf, loff_t off, size_t count)
drivers/acpi/device_sysfs.c +22 -22

111 lines not on this page · raw message

drivers/acpi/dock.c +13 -13
index e3414131bfca..9bb42a772bee 100644
@@ -485,7 +485,7 @@ int dock_notify(struct acpi_device *adev, u32 event)
 /*
  * show_docked - read method for "docked" file in sysfs
  */
-static ssize_t show_docked(struct device *dev,
+static ssize_t docked_show(struct device *dev,
 			   struct device_attribute *attr, char *buf)
 {
 	struct dock_station *dock_station = dev->platform_data;
@@ -494,25 +494,25 @@ static ssize_t show_docked(struct device *dev,
 	acpi_bus_get_device(dock_station->handle, &adev);
 	return snprintf(buf, PAGE_SIZE, "%u\n", acpi_device_enumerated(adev));
 }
-static DEVICE_ATTR(docked, S_IRUGO, show_docked, NULL);
+static DEVICE_ATTR_RO(docked);
 
 /*
  * show_flags - read method for flags file in sysfs
  */
-static ssize_t show_flags(struct device *dev,
+static ssize_t flags_show(struct device *dev,
 			  struct device_attribute *attr, char *buf)
 {
 	struct dock_station *dock_station = dev->platform_data;
 	return snprintf(buf, PAGE_SIZE, "%d\n", dock_station->flags);
 
 }
-static DEVICE_ATTR(flags, S_IRUGO, show_flags, NULL);
+static DEVICE_ATTR_RO(flags);
 
 /*
  * write_undock - write method for "undock" file in sysfs
  */
-static ssize_t write_undock(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
+static ssize_t undock_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
 {
 	int ret;
 	struct dock_station *dock_station = dev->platform_data;
@@ -526,13 +526,13 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr,
 	acpi_scan_lock_release();
 	return ret ? ret: count;
 }
-static DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock);
+static DEVICE_ATTR_WO(undock);
 
 /*
  * show_dock_uid - read method for "uid" file in sysfs
  */
-static ssize_t show_dock_uid(struct device *dev,
-			     struct device_attribute *attr, char *buf)
+static ssize_t uid_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	unsigned long long lbuf;
 	struct dock_station *dock_station = dev->platform_data;
@@ -543,10 +543,10 @@ static ssize_t show_dock_uid(struct device *dev,
 
 	return snprintf(buf, PAGE_SIZE, "%llx\n", lbuf);
 }
-static DEVICE_ATTR(uid, S_IRUGO, show_dock_uid, NULL);
+static DEVICE_ATTR_RO(uid);
 
-static ssize_t show_dock_type(struct device *dev,
-		struct device_attribute *attr, char *buf)
+static ssize_t type_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
 {
 	struct dock_station *dock_station = dev->platform_data;
 	char *type;
@@ -562,7 +562,7 @@ static ssize_t show_dock_type(struct device *dev,
 
 	return snprintf(buf, PAGE_SIZE, "%s\n", type);
 }
-static DEVICE_ATTR(type, S_IRUGO, show_dock_type, NULL);
+static DEVICE_ATTR_RO(type);
 
 static struct attribute *dock_attributes[] = {
 	&dev_attr_docked.attr,
drivers/acpi/power.c +5 -4
index fe1e7bc91a5e..3261cffdd5e0 100644
@@ -888,15 +888,16 @@ static void acpi_release_power_resource(struct device *dev)
 	kfree(resource);
 }
 
-static ssize_t acpi_power_in_use_show(struct device *dev,
-				      struct device_attribute *attr,
-				      char *buf) {
+static ssize_t resource_in_use_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
 	struct acpi_power_resource *resource;
 
 	resource = to_power_resource(to_acpi_device(dev));
 	return sprintf(buf, "%u\n", !!resource->ref_count);
 }
-static DEVICE_ATTR(resource_in_use, 0444, acpi_power_in_use_show, NULL);
+static DEVICE_ATTR_RO(resource_in_use);
 
 static void acpi_power_sysfs_remove(struct acpi_device *device)
 {
Signature · 1 line
2.30.2
author maintainer
#180 lore raw

PATCH 180/348 ACPI: bgrt: Fix CFI violation

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit f37ccf8fce155d08ae2a4fb3db677911ced0c21a ]

clang's Control Flow Integrity requires that every indirect call has a valid target, which is based on the type of the function pointer. The *_show() functions in this file are written as if they will be called from dev_attr_show(); however, they will be called from sysfs_kf_seq_show() because the files were created by sysfs_create_group() and the sysfs ops are based on kobj_sysfs_ops because of kobject_add_and_create(). Because the *_show() functions do not match the type of the show() member in struct kobj_attribute, there is a CFI violation.

$ cat /sys/firmware/acpi/bgrt/{status,type,version,{x,y}offset}}
1
0
1
522
307
$ dmesg | grep "CFI failure"
[  267.761825] CFI failure (target: type_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[  267.762246] CFI failure (target: xoffset_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[  267.762584] CFI failure (target: status_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[  267.762973] CFI failure (target: yoffset_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[  267.763330] CFI failure (target: version_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):

Convert these functions to the type of the show() member in struct kobj_attribute so that there is no more CFI violation. Because these functions are all so similar, combine them into a macro.

---
 drivers/acpi/bgrt.c | 57 ++++++++++++++-------------------------------
 1 file changed, 18 insertions(+), 39 deletions(-)
drivers/acpi/bgrt.c +18 -39
index 19bb7f870204..e0d14017706e 100644
@@ -15,40 +15,19 @@
 static void *bgrt_image;
 static struct kobject *bgrt_kobj;
 
-static ssize_t version_show(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab.version);
-}
-static DEVICE_ATTR_RO(version);
-
-static ssize_t status_show(struct device *dev,
-			   struct device_attribute *attr, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab.status);
-}
-static DEVICE_ATTR_RO(status);
-
-static ssize_t type_show(struct device *dev,
-			 struct device_attribute *attr, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab.image_type);
-}
-static DEVICE_ATTR_RO(type);
-
-static ssize_t xoffset_show(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab.image_offset_x);
-}
-static DEVICE_ATTR_RO(xoffset);
-
-static ssize_t yoffset_show(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab.image_offset_y);
-}
-static DEVICE_ATTR_RO(yoffset);
+#define BGRT_SHOW(_name, _member) \
+	static ssize_t _name##_show(struct kobject *kobj,			\
+				    struct kobj_attribute *attr, char *buf)	\
+	{									\
+		return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab._member);	\
+	}									\
+	struct kobj_attribute bgrt_attr_##_name = __ATTR_RO(_name)
+
+BGRT_SHOW(version, version);
+BGRT_SHOW(status, status);
+BGRT_SHOW(type, image_type);
+BGRT_SHOW(xoffset, image_offset_x);
+BGRT_SHOW(yoffset, image_offset_y);
 
 static ssize_t image_read(struct file *file, struct kobject *kobj,
 	       struct bin_attribute *attr, char *buf, loff_t off, size_t count)
@@ -60,11 +39,11 @@ static ssize_t image_read(struct file *file, struct kobject *kobj,
 static BIN_ATTR_RO(image, 0);	/* size gets filled in later */
 
 static struct attribute *bgrt_attributes[] = {
-	&dev_attr_version.attr,
-	&dev_attr_status.attr,
-	&dev_attr_type.attr,
-	&dev_attr_xoffset.attr,
-	&dev_attr_yoffset.attr,
+	&bgrt_attr_version.attr,
+	&bgrt_attr_status.attr,
+	&bgrt_attr_type.attr,
+	&bgrt_attr_xoffset.attr,
+	&bgrt_attr_yoffset.attr,
 	NULL,
 };
 
Signature · 1 line
2.30.2
author maintainer
#181 lore raw

PATCH 181/348 cpufreq: Make cpufreq_online() call driver->offline() on errors

In reply to Greg Kroah-Hartman

From: Rafael J. Wysocki <[email protected]>

[ Upstream commit 3b7180573c250eb6e2a7eec54ae91f27472332ea ]

In the CPU removal path the ->offline() callback provided by the driver is always invoked before ->exit(), but in the cpufreq_online() error path it is not, so ->exit() is expected to somehow know the context in which it has been called and act accordingly.

That is less than straightforward, so make cpufreq_online() invoke the driver's ->offline() callback, if present, on errors before ->exit() too.

This only potentially affects intel_pstate.

Fixes 91a12e91dc39 ("cpufreq: Allow light-weight tear down and bring up of CPUs")
---
 drivers/cpufreq/cpufreq.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/cpufreq/cpufreq.c +10 -1
index 194a6587a1de..c4e928375c40 100644
@@ -1361,9 +1361,14 @@ static int cpufreq_online(unsigned int cpu)
 			goto out_free_policy;
 		}
 
+		/*
+		 * The initialization has succeeded and the policy is online.
+		 * If there is a problem with its frequency table, take it
+		 * offline and drop it.
+		 */
 		ret = cpufreq_table_validate_and_sort(policy);
 		if (ret)
-			goto out_exit_policy;
+			goto out_offline_policy;
 
 		/* related_cpus should at least include policy->cpus. */
 		cpumask_copy(policy->related_cpus, policy->cpus);
@@ -1507,6 +1512,10 @@ out_destroy_policy:
 
 	up_write(&policy->rwsem);
 
+out_offline_policy:
+	if (cpufreq_driver->offline)
+		cpufreq_driver->offline(policy);
+
 out_exit_policy:
 	if (cpufreq_driver->exit)
 		cpufreq_driver->exit(policy);
Signature · 1 line
2.30.2
author maintainer
#182 lore raw

PATCH 182/348 ocfs2: fix snprintf() checking

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 54e948c60cc843b6e84dc44496edc91f51d2a28e ]

The snprintf() function returns the number of bytes which would have been printed if the buffer was large enough. In other words it can return ">= remain" but this code assumes it returns "== remain".

The run time impact of this bug is not very severe. The next iteration through the loop would trigger a WARN() when we pass a negative limit to snprintf(). We would then return success instead of -E2BIG.

The kernel implementation of snprintf() will never return negatives so there is no need to check and I have deleted that dead code.

Fixes a860f6eb4c6a ("ocfs2: sysfile interfaces for online file check")
Fixes 74ae4e104dfc ("ocfs2: Create stack glue sysfs files.")
Cc Mark Fasheh <[email protected]>
Cc Joel Becker <[email protected]>
Cc Junxiao Bi <[email protected]>
Cc Changwei Ge <[email protected]>
Cc Gang He <[email protected]>
Cc Jun Piao <[email protected]>
---
 fs/ocfs2/filecheck.c | 6 +-----
 fs/ocfs2/stackglue.c | 8 ++------
 2 files changed, 3 insertions(+), 11 deletions(-)
fs/ocfs2/filecheck.c +1 -5
index 50f11bfdc8c2..82a3edc4aea4 100644
@@ -328,11 +328,7 @@ static ssize_t ocfs2_filecheck_attr_show(struct kobject *kobj,
 		ret = snprintf(buf + total, remain, "%lu\t\t%u\t%s\n",
 			       p->fe_ino, p->fe_done,
 			       ocfs2_filecheck_error(p->fe_status));
-		if (ret < 0) {
-			total = ret;
-			break;
-		}
-		if (ret == remain) {
+		if (ret >= remain) {
 			/* snprintf() didn't fit */
 			total = -E2BIG;
 			break;
fs/ocfs2/stackglue.c +2 -6
index 8aa6a667860c..188038760136 100644
@@ -502,11 +502,7 @@ static ssize_t ocfs2_loaded_cluster_plugins_show(struct kobject *kobj,
 	list_for_each_entry(p, &ocfs2_stack_list, sp_list) {
 		ret = snprintf(buf, remain, "%s\n",
 			       p->sp_name);
-		if (ret < 0) {
-			total = ret;
-			break;
-		}
-		if (ret == remain) {
+		if (ret >= remain) {
 			/* snprintf() didn't fit */
 			total = -E2BIG;
 			break;
@@ -533,7 +529,7 @@ static ssize_t ocfs2_active_cluster_plugin_show(struct kobject *kobj,
 	if (active_stack) {
 		ret = snprintf(buf, PAGE_SIZE, "%s\n",
 			       active_stack->sp_name);
-		if (ret == PAGE_SIZE)
+		if (ret >= PAGE_SIZE)
 			ret = -E2BIG;
 	}
 	spin_unlock(&ocfs2_stack_lock);
Signature · 1 line
2.30.2
author maintainer
#183 lore raw

PATCH 183/348 dax: fix ENOMEM handling in grab_mapping_entry()

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

[ Upstream commit 1a14e3779dd58c16b30e56558146e5cc850ba8b0 ]

grab_mapping_entry() has a bug in handling of ENOMEM condition. Suppose we have a PMD entry at index i which we are downgrading to a PTE entry. grab_mapping_entry() will set pmd_downgrade to true, lock the entry, clear the entry in xarray, and decrement mapping->nrpages. The it will call:

	entry = dax_make_entry(pfn_to_pfn_t(0), flags);
	dax_lock_entry(xas, entry);

which inserts new PTE entry into xarray. However this may fail allocating the new node. We handle this by:

	if (xas_nomem(xas, mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM))
		goto retry;

however pmd_downgrade stays set to true even though 'entry' returned from get_unlocked_entry() will be NULL now. And we will go again through the downgrade branch. This is mostly harmless except that mapping->nrpages is decremented again and we temporarily have an invalid entry stored in xarray. Fix the problem by setting pmd_downgrade to false each time we lookup the entry we work with so that it matches the entry we found.

Fixes b15cd800682f ("dax: Convert page fault handlers to XArray")
Cc Matthew Wilcox <[email protected]>
Cc "Aneesh Kumar K.V" <[email protected]>
---
 fs/dax.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/dax.c +2 -1
index 3b0e5da96d54..12953e892bb2 100644
@@ -477,10 +477,11 @@ static void *grab_mapping_entry(struct xa_state *xas,
 		struct address_space *mapping, unsigned int order)
 {
 	unsigned long index = xas->xa_index;
-	bool pmd_downgrade = false; /* splitting PMD entry into PTE entries? */
+	bool pmd_downgrade;	/* splitting PMD entry into PTE entries? */
 	void *entry;
 
 retry:
+	pmd_downgrade = false;
 	xas_lock_irq(xas);
 	entry = get_unlocked_entry(xas, order);
 
Signature · 1 line
2.30.2
author maintainer
#184 lore raw

PATCH 184/348 xfrm: xfrm_state_mtu should return at least 1280 for ipv6

In reply to Greg Kroah-Hartman

From: Sabrina Dubroca <[email protected]>

[ Upstream commit b515d2637276a3810d6595e10ab02c13bfd0b63a ]

Jianwen reported that IPv6 Interoperability tests are failing in an IPsec case where one of the links between the IPsec peers has an MTU of 1280. The peer generates a packet larger than this MTU, the router replies with a "Packet too big" message indicating an MTU of 1280. When the peer tries to send another large packet, xfrm_state_mtu returns 1280 - ipsec_overhead, which causes ip6_setup_cork to fail with EINVAL.

We can fix this by forcing xfrm_state_mtu to return IPV6_MIN_MTU when IPv6 is used. After going through IPsec, the packet will then be fragmented to obey the actual network's PMTU, just before leaving the host.

Currently, TFC padding is capped to PMTU - overhead to avoid
fragementation: after padding and encapsulation, we still fit within the PMTU. That behavior is preserved in this patch.

Fixes 91657eafb64b ("xfrm: take net hdr len into account for esp payload size calculation")
---
 include/net/xfrm.h    |  1 +
 net/ipv4/esp4.c       |  2 +-
 net/ipv6/esp6.c       |  2 +-
 net/xfrm/xfrm_state.c | 14 ++++++++++++--
 4 files changed, 15 insertions(+), 4 deletions(-)
include/net/xfrm.h +1 -0
index 614f19bbad74..8ce63850d6d0 100644
@@ -1543,6 +1543,7 @@ void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si);
 void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si);
 u32 xfrm_replay_seqhi(struct xfrm_state *x, __be32 net_seq);
 int xfrm_init_replay(struct xfrm_state *x);
+u32 __xfrm_state_mtu(struct xfrm_state *x, int mtu);
 u32 xfrm_state_mtu(struct xfrm_state *x, int mtu);
 int __xfrm_init_state(struct xfrm_state *x, bool init_replay, bool offload);
 int xfrm_init_state(struct xfrm_state *x);
net/ipv4/esp4.c +1 -1
index 00210e55b4cd..86c836fa2145 100644
@@ -499,7 +499,7 @@ static int esp_output(struct xfrm_state *x, struct sk_buff *skb)
 		struct xfrm_dst *dst = (struct xfrm_dst *)skb_dst(skb);
 		u32 padto;
 
-		padto = min(x->tfcpad, xfrm_state_mtu(x, dst->child_mtu_cached));
+		padto = min(x->tfcpad, __xfrm_state_mtu(x, dst->child_mtu_cached));
 		if (skb->len < padto)
 			esp.tfclen = padto - skb->len;
 	}
net/ipv6/esp6.c +1 -1
index 7a739f16d82b..12570a73def8 100644
@@ -440,7 +440,7 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb)
 		struct xfrm_dst *dst = (struct xfrm_dst *)skb_dst(skb);
 		u32 padto;
 
-		padto = min(x->tfcpad, xfrm_state_mtu(x, dst->child_mtu_cached));
+		padto = min(x->tfcpad, __xfrm_state_mtu(x, dst->child_mtu_cached));
 		if (skb->len < padto)
 			esp.tfclen = padto - skb->len;
 	}
net/xfrm/xfrm_state.c +12 -2
index 1423e2b7cb42..c6b2c99b501b 100644
@@ -2440,7 +2440,7 @@ void xfrm_state_delete_tunnel(struct xfrm_state *x)
 }
 EXPORT_SYMBOL(xfrm_state_delete_tunnel);
 
-u32 xfrm_state_mtu(struct xfrm_state *x, int mtu)
+u32 __xfrm_state_mtu(struct xfrm_state *x, int mtu)
 {
 	const struct xfrm_type *type = READ_ONCE(x->type);
 	struct crypto_aead *aead;
@@ -2471,7 +2471,17 @@ u32 xfrm_state_mtu(struct xfrm_state *x, int mtu)
 	return ((mtu - x->props.header_len - crypto_aead_authsize(aead) -
 		 net_adj) & ~(blksize - 1)) + net_adj - 2;
 }
-EXPORT_SYMBOL_GPL(xfrm_state_mtu);
+EXPORT_SYMBOL_GPL(__xfrm_state_mtu);
+
+u32 xfrm_state_mtu(struct xfrm_state *x, int mtu)
+{
+	mtu = __xfrm_state_mtu(x, mtu);
+
+	if (x->props.family == AF_INET6 && mtu < IPV6_MIN_MTU)
+		return IPV6_MIN_MTU;
+
+	return mtu;
+}
 
 int __xfrm_init_state(struct xfrm_state *x, bool init_replay, bool offload)
 {
Signature · 1 line
2.30.2
author maintainer
#185 lore raw

PATCH 185/348 video: fbdev: imxfb: Fix an error message

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 767d724a160eb1cd00c86fb8c2e21fa1ab3c37ac ]

'ret' is known to be 0 here.
No error code is available, so just remove it from the error message.

---
 drivers/video/fbdev/imxfb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/imxfb.c +1 -1
index b3286d1fa543..ffde3107104b 100644
@@ -977,7 +977,7 @@ static int imxfb_probe(struct platform_device *pdev)
 	info->screen_buffer = dma_alloc_wc(&pdev->dev, fbi->map_size,
 					   &fbi->map_dma, GFP_KERNEL);
 	if (!info->screen_buffer) {
-		dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret);
+		dev_err(&pdev->dev, "Failed to allocate video RAM\n");
 		ret = -ENOMEM;
 		goto failed_map;
 	}
Signature · 1 line
2.30.2
author maintainer
#186 lore raw

PATCH 186/348 net: mvpp2: Put fwnode in error case during ->probe()

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 71f0891c84dfdc448736082ab0a00acd29853896 ]

In each iteration fwnode_for_each_available_child_node() bumps a reference counting of a loop variable followed by dropping in on a next iteration,

Since in error case the loop is broken, we have to drop a reference count by ourselves. Do it for port_fwnode in error case during ->probe().

Fixes 248122212f68 ("net: mvpp2: use device_*/fwnode_* APIs instead of of_*")
Cc Marcin Wojtas <[email protected]>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +2 -0
index 491bcfd36ac2..7857ebff92e8 100644
@@ -5910,6 +5910,8 @@ static int mvpp2_probe(struct platform_device *pdev)
 	return 0;
 
 err_port_probe:
+	fwnode_handle_put(port_fwnode);
+
 	i = 0;
 	fwnode_for_each_available_child_node(fwnode, port_fwnode) {
 		if (priv->port_list[i])
Signature · 1 line
2.30.2
author maintainer
#187 lore raw

PATCH 187/348 net: pch_gbe: Propagate error from devm_gpio_request_one()

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 9e3617a7b84512bf96c04f9cf82d1a7257d33794 ]

If GPIO controller is not available yet we need to defer the probe of GBE until provider will become available.

While here, drop GPIOF_EXPORT because it's deprecated and may not be available.

Fixes f1a26fdf5944 ("pch_gbe: Add MinnowBoard support")
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +7 -3
index 18e6d87c607b..f1269fe4ac72 100644
@@ -2535,9 +2535,13 @@ static int pch_gbe_probe(struct pci_dev *pdev,
 	adapter->pdev = pdev;
 	adapter->hw.back = adapter;
 	adapter->hw.reg = pcim_iomap_table(pdev)[PCH_GBE_PCI_BAR];
+
 	adapter->pdata = (struct pch_gbe_privdata *)pci_id->driver_data;
-	if (adapter->pdata && adapter->pdata->platform_init)
-		adapter->pdata->platform_init(pdev);
+	if (adapter->pdata && adapter->pdata->platform_init) {
+		ret = adapter->pdata->platform_init(pdev);
+		if (ret)
+			goto err_free_netdev;
+	}
 
 	adapter->ptp_pdev =
 		pci_get_domain_bus_and_slot(pci_domain_nr(adapter->pdev->bus),
@@ -2632,7 +2636,7 @@ err_free_netdev:
  */
 static int pch_gbe_minnow_platform_init(struct pci_dev *pdev)
 {
-	unsigned long flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH | GPIOF_EXPORT;
+	unsigned long flags = GPIOF_OUT_INIT_HIGH;
 	unsigned gpio = MINNOW_PHY_RESET_GPIO;
 	int ret;
 
Signature · 1 line
2.30.2
author maintainer
#188 lore raw

PATCH 188/348 pinctrl: renesas: r8a7796: Add missing bias for PRESET# pin

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 2cee31cd49733e89dfedf4f68a56839fc2e42040 ]

R-Car Gen3 Hardware Manual Errata for Rev. 0.52 of Nov 30, 2016, added the configuration bit for bias pull-down control for the PRESET# pin on R-Car M3-W. Add driver support for controlling pull-down on this pin.

---
 drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/pinctrl/sh-pfc/pfc-r8a7796.c +2 -1
index 61db7c7a35ec..60d35a2c14ba 100644
@@ -68,6 +68,7 @@
 	PIN_NOGP_CFG(QSPI1_MOSI_IO0, "QSPI1_MOSI_IO0", fn, CFG_FLAGS),	\
 	PIN_NOGP_CFG(QSPI1_SPCLK, "QSPI1_SPCLK", fn, CFG_FLAGS),	\
 	PIN_NOGP_CFG(QSPI1_SSL, "QSPI1_SSL", fn, CFG_FLAGS),		\
+	PIN_NOGP_CFG(PRESET_N, "PRESET#", fn, SH_PFC_PIN_CFG_PULL_DOWN),\
 	PIN_NOGP_CFG(RPC_INT_N, "RPC_INT#", fn, CFG_FLAGS),		\
 	PIN_NOGP_CFG(RPC_RESET_N, "RPC_RESET#", fn, CFG_FLAGS),		\
 	PIN_NOGP_CFG(RPC_WP_N, "RPC_WP#", fn, CFG_FLAGS),		\
@@ -6109,7 +6110,7 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = {
 		[ 4] = RCAR_GP_PIN(6, 29),	/* USB30_OVC */
 		[ 5] = RCAR_GP_PIN(6, 30),	/* GP6_30 */
 		[ 6] = RCAR_GP_PIN(6, 31),	/* GP6_31 */
-		[ 7] = SH_PFC_PIN_NONE,
+		[ 7] = PIN_PRESET_N,		/* PRESET# */
 		[ 8] = SH_PFC_PIN_NONE,
 		[ 9] = SH_PFC_PIN_NONE,
 		[10] = SH_PFC_PIN_NONE,
Signature · 1 line
2.30.2
author maintainer
#189 lore raw

PATCH 189/348 pinctrl: renesas: r8a77990: JTAG pins do not have pull-down capabilities

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 702a5fa2fe4d7e7f28fed92a170b540acfff9d34 ]

Hence remove the SH_PFC_PIN_CFG_PULL_DOWN flags from their pin descriptions.

---
 drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/pinctrl/sh-pfc/pfc-r8a77990.c +4 -4
index 5200dadd6b3e..f4b51e5e7e02 100644
@@ -54,10 +54,10 @@
 	PIN_NOGP_CFG(FSCLKST_N, "FSCLKST_N", fn, CFG_FLAGS),		\
 	PIN_NOGP_CFG(MLB_REF, "MLB_REF", fn, CFG_FLAGS),		\
 	PIN_NOGP_CFG(PRESETOUT_N, "PRESETOUT_N", fn, CFG_FLAGS),	\
-	PIN_NOGP_CFG(TCK, "TCK", fn, CFG_FLAGS),			\
-	PIN_NOGP_CFG(TDI, "TDI", fn, CFG_FLAGS),			\
-	PIN_NOGP_CFG(TMS, "TMS", fn, CFG_FLAGS),			\
-	PIN_NOGP_CFG(TRST_N, "TRST_N", fn, CFG_FLAGS)
+	PIN_NOGP_CFG(TCK, "TCK", fn, SH_PFC_PIN_CFG_PULL_UP),		\
+	PIN_NOGP_CFG(TDI, "TDI", fn, SH_PFC_PIN_CFG_PULL_UP),		\
+	PIN_NOGP_CFG(TMS, "TMS", fn, SH_PFC_PIN_CFG_PULL_UP),		\
+	PIN_NOGP_CFG(TRST_N, "TRST_N", fn, SH_PFC_PIN_CFG_PULL_UP)
 
 /*
  * F_() : just information
Signature · 1 line
2.30.2
author maintainer
#190 lore raw

PATCH 190/348 clk: meson: g12a: fix gp0 and hifi ranges

In reply to Greg Kroah-Hartman

From: Jerome Brunet <[email protected]>

[ Upstream commit bc794f8c56abddf709f1f84fcb2a3c9e7d9cc9b4 ]

While some SoC samples are able to lock with a PLL factor of 55, others samples can't. ATM, a minimum of 60 appears to work on all the samples I have tried.

Even with 60, it sometimes takes a long time for the PLL to eventually lock. The documentation says that the minimum rate of these PLLs DCO should be 3GHz, a factor of 125. Let's use that to be on the safe side.

With factor range changed, the PLL seems to lock quickly (enough) so far. It is still unclear if the range was the only reason for the delay.

Fixes 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
---
 drivers/clk/meson/g12a.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/meson/g12a.c +1 -1
index 3143e16065de..a55b22ebf103 100644
@@ -1602,7 +1602,7 @@ static struct clk_regmap g12b_cpub_clk_trace = {
 };
 
 static const struct pll_mult_range g12a_gp0_pll_mult_range = {
-	.min = 55,
+	.min = 125,
 	.max = 255,
 };
 
Signature · 1 line
2.30.2
author maintainer
#191 lore raw

PATCH 191/348 net: ftgmac100: add missing error return code in ftgmac100_probe()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 52af13a41489d7bbc1932d17583eff6e5fffc820 ]

The variables will be free on path err_phy_connect, it should return error code, or it will cause double free when calling ftgmac100_remove().

Fixes bd466c3fb5a4 ("net/faraday: Support NCSI mode")
Fixes 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property")
---
 drivers/net/ethernet/faraday/ftgmac100.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/ethernet/faraday/ftgmac100.c +5 -1
index 4050f81f788c..2c06cdcd3e75 100644
@@ -1821,14 +1821,17 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	if (np && of_get_property(np, "use-ncsi", NULL)) {
 		if (!IS_ENABLED(CONFIG_NET_NCSI)) {
 			dev_err(&pdev->dev, "NCSI stack not enabled\n");
+			err = -EINVAL;
 			goto err_ncsi_dev;
 		}
 
 		dev_info(&pdev->dev, "Using NCSI interface\n");
 		priv->use_ncsi = true;
 		priv->ndev = ncsi_register_dev(netdev, ftgmac100_ncsi_handler);
-		if (!priv->ndev)
+		if (!priv->ndev) {
+			err = -EINVAL;
 			goto err_ncsi_dev;
+		}
 	} else if (np && of_get_property(np, "phy-handle", NULL)) {
 		struct phy_device *phy;
 
@@ -1836,6 +1839,7 @@ static int ftgmac100_probe(struct platform_device *pdev)
 					     &ftgmac100_adjust_link);
 		if (!phy) {
 			dev_err(&pdev->dev, "Failed to connect to phy\n");
+			err = -EINVAL;
 			goto err_setup_mdio;
 		}
 
Signature · 1 line
2.30.2
author maintainer
#192 lore raw

PATCH 192/348 drm/rockchip: cdn-dp-core: add missing clk_disable_unprepare() on error in cdn_dp_grf_write()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit ae41d925c75b53798f289c69ee8d9f7d36432f6d ]

After calling clk_prepare_enable(), clk_disable_unprepare() need be called when calling regmap_write() failed.

Fixes 1a0f7ed3abe2 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
---
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/rockchip/cdn-dp-core.c +1 -0
index d505ea7d5384..8f299d76b69b 100644
@@ -72,6 +72,7 @@ static int cdn_dp_grf_write(struct cdn_dp_device *dp,
 	ret = regmap_write(dp->grf, reg, val);
 	if (ret) {
 		DRM_DEV_ERROR(dp->dev, "Could not write to GRF: %d\n", ret);
+		clk_disable_unprepare(dp->grf_clk);
 		return ret;
 	}
 
Signature · 1 line
2.30.2
author maintainer
#193 lore raw

PATCH 193/348 drm/rockchip: dsi: move all lane config except LCDC mux to bind()

In reply to Greg Kroah-Hartman

From: Thomas Hebb <[email protected]>

[ Upstream commit 43c2de1002d2b70fb5941fa14e97a34e3dc214d4 ]

When we first enable the DSI encoder, we currently program some per-chip configuration that we look up in rk3399_chip_data based on the device tree compatible we match. This data configures various parameters of the MIPI lanes, including on RK3399 whether DSI1 is slaved to DSI0 in a dual-mode configuration. It also selects which LCDC (i.e. VOP) to scan out from.

This causes a problem in RK3399 dual-mode configurations, though: panel prepare() callbacks run before the encoder gets enabled and expect to be able to write commands to the DSI bus, but the bus isn't fully functional until the lane and master/slave configuration have been programmed. As a result, dual-mode panels (and possibly others too) fail to turn on when the rockchipdrm driver is initially loaded.

Because the LCDC mux is the only thing we don't know until enable time (and is the only thing that can ever change), we can actually move most of the initialization to bind() and get it out of the way early. That's what this change does. (Rockchip's 4.4 BSP kernel does it in mode_set(), which also avoids the issue, but bind() seems like the more correct place to me.)

Tested on a Google Scarlet board (Acer Chromebook Tab 10), which has a Kingdisplay KD097D04 dual-mode panel. Prior to this change, the panel's backlight would turn on but no image would appear when initially loading rockchipdrm. If I kept rockchipdrm loaded and reloaded the panel driver, it would come on. With this change, the panel successfully turns on during initial rockchipdrm load as expected.

---
 .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c   | 36 ++++++++++++++-----
 1 file changed, 28 insertions(+), 8 deletions(-)
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c +28 -8
index bc073ec5c183..ecb59dc6c8b8 100644
@@ -564,13 +564,8 @@ static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_rockchip_phy_ops = {
 	.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
 };
 
-static void dw_mipi_dsi_rockchip_config(struct dw_mipi_dsi_rockchip *dsi,
-					int mux)
+static void dw_mipi_dsi_rockchip_config(struct dw_mipi_dsi_rockchip *dsi)
 {
-	if (dsi->cdata->lcdsel_grf_reg)
-		regmap_write(dsi->grf_regmap, dsi->cdata->lcdsel_grf_reg,
-			mux ? dsi->cdata->lcdsel_lit : dsi->cdata->lcdsel_big);
-
 	if (dsi->cdata->lanecfg1_grf_reg)
 		regmap_write(dsi->grf_regmap, dsi->cdata->lanecfg1_grf_reg,
 					      dsi->cdata->lanecfg1);
@@ -584,6 +579,13 @@ static void dw_mipi_dsi_rockchip_config(struct dw_mipi_dsi_rockchip *dsi,
 					      dsi->cdata->enable);
 }
 
+static void dw_mipi_dsi_rockchip_set_lcdsel(struct dw_mipi_dsi_rockchip *dsi,
+					    int mux)
+{
+	regmap_write(dsi->grf_regmap, dsi->cdata->lcdsel_grf_reg,
+		mux ? dsi->cdata->lcdsel_lit : dsi->cdata->lcdsel_big);
+}
+
 static int
 dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
 				 struct drm_crtc_state *crtc_state,
@@ -639,9 +641,9 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 		return;
 	}
 
-	dw_mipi_dsi_rockchip_config(dsi, mux);
+	dw_mipi_dsi_rockchip_set_lcdsel(dsi, mux);
 	if (dsi->slave)
-		dw_mipi_dsi_rockchip_config(dsi->slave, mux);
+		dw_mipi_dsi_rockchip_set_lcdsel(dsi->slave, mux);
 
 	clk_disable_unprepare(dsi->grf_clk);
 }
@@ -800,6 +802,24 @@ static int dw_mipi_dsi_rockchip_bind(struct device *dev,
 		return ret;
 	}
 
+	/*
+	 * With the GRF clock running, write lane and dual-mode configurations
+	 * that won't change immediately. If we waited until enable() to do
+	 * this, things like panel preparation would not be able to send
+	 * commands over DSI.
+	 */
+	ret = clk_prepare_enable(dsi->grf_clk);
+	if (ret) {
+		DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
+		return ret;
+	}
+
+	dw_mipi_dsi_rockchip_config(dsi);
+	if (dsi->slave)
+		dw_mipi_dsi_rockchip_config(dsi->slave);
+
+	clk_disable_unprepare(dsi->grf_clk);
+
 	ret = rockchip_dsi_drm_create_encoder(dsi, drm_dev);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "Failed to create drm encoder\n");
Signature · 1 line
2.30.2
author maintainer
#194 lore raw

PATCH 194/348 ehea: fix error return code in ehea_restart_qps()

In reply to Greg Kroah-Hartman

From: Zhen Lei <[email protected]>

[ Upstream commit 015dbf5662fd689d581c0bc980711b073ca09a1a ]

Fix to return -EFAULT from the error handling case instead of 0, as done elsewhere in this function.

By the way, when get_zeroed_page() fails, directly return -ENOMEM to simplify code.

---
 drivers/net/ethernet/ibm/ehea/ehea_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/net/ethernet/ibm/ehea/ehea_main.c +5 -4
index 13e30eba5349..1fd2b84e2e91 100644
@@ -2617,10 +2617,8 @@ static int ehea_restart_qps(struct net_device *dev)
 	u16 dummy16 = 0;
 
 	cb0 = (void *)get_zeroed_page(GFP_KERNEL);
-	if (!cb0) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!cb0)
+		return -ENOMEM;
 
 	for (i = 0; i < (port->num_def_qps); i++) {
 		struct ehea_port_res *pr =  &port->port_res[i];
@@ -2640,6 +2638,7 @@ static int ehea_restart_qps(struct net_device *dev)
 					    cb0);
 		if (hret != H_SUCCESS) {
 			netdev_err(dev, "query_ehea_qp failed (1)\n");
+			ret = -EFAULT;
 			goto out;
 		}
 
@@ -2652,6 +2651,7 @@ static int ehea_restart_qps(struct net_device *dev)
 					     &dummy64, &dummy16, &dummy16);
 		if (hret != H_SUCCESS) {
 			netdev_err(dev, "modify_ehea_qp failed (1)\n");
+			ret = -EFAULT;
 			goto out;
 		}
 
@@ -2660,6 +2660,7 @@ static int ehea_restart_qps(struct net_device *dev)
 					    cb0);
 		if (hret != H_SUCCESS) {
 			netdev_err(dev, "query_ehea_qp failed (2)\n");
+			ret = -EFAULT;
 			goto out;
 		}
 
Signature · 1 line
2.30.2
author maintainer
#195 lore raw

PATCH 195/348 net/sched: act_vlan: Fix modify to allow 0

In reply to Greg Kroah-Hartman

From: Boris Sukholitko <[email protected]>

[ Upstream commit 9c5eee0afca09cbde6bd00f77876754aaa552970 ]

Currently vlan modification action checks existence of vlan priority by comparing it to 0. Therefore it is impossible to modify existing vlan tag to have priority 0.

For example, the following tc command will change the vlan id but will not affect vlan priority:

tc filter add dev eth1 ingress matchall action vlan modify id 300 \
priority 0 pipe mirred egress redirect dev eth2

The incoming packet on eth1:

ethertype 802.1Q (0x8100), vlan 200, p 4, ethertype IPv4

will be changed to:

ethertype 802.1Q (0x8100), vlan 300, p 4, ethertype IPv4

although the user has intended to have p == 0.

The fix is to add tcfv_push_prio_exists flag to struct tcf_vlan_params and rely on it when deciding to set the priority.

Fixes 45a497f2d149a4a8061c (net/sched: act_vlan: Introduce TCA_VLAN_ACT_MODIFY vlan action)
---
 include/net/tc_act/tc_vlan.h | 1 +
 net/sched/act_vlan.c         | 7 +++++--
 2 files changed, 6 insertions(+), 2 deletions(-)
include/net/tc_act/tc_vlan.h +1 -0
index 4e2502408c31..add6fb50dd33 100644
@@ -14,6 +14,7 @@ struct tcf_vlan_params {
 	u16               tcfv_push_vid;
 	__be16            tcfv_push_proto;
 	u8                tcfv_push_prio;
+	bool              tcfv_push_prio_exists;
 	struct rcu_head   rcu;
 };
 
net/sched/act_vlan.c +5 -2
index 3c26042f4ea6..7dc76c68ec52 100644
@@ -70,7 +70,7 @@ static int tcf_vlan_act(struct sk_buff *skb, const struct tc_action *a,
 		/* replace the vid */
 		tci = (tci & ~VLAN_VID_MASK) | p->tcfv_push_vid;
 		/* replace prio bits, if tcfv_push_prio specified */
-		if (p->tcfv_push_prio) {
+		if (p->tcfv_push_prio_exists) {
 			tci &= ~VLAN_PRIO_MASK;
 			tci |= p->tcfv_push_prio << VLAN_PRIO_SHIFT;
 		}
@@ -107,6 +107,7 @@ static int tcf_vlan_init(struct net *net, struct nlattr *nla,
 	struct tc_action_net *tn = net_generic(net, vlan_net_id);
 	struct nlattr *tb[TCA_VLAN_MAX + 1];
 	struct tcf_chain *goto_ch = NULL;
+	bool push_prio_exists = false;
 	struct tcf_vlan_params *p;
 	struct tc_vlan *parm;
 	struct tcf_vlan *v;
@@ -175,7 +176,8 @@ static int tcf_vlan_init(struct net *net, struct nlattr *nla,
 			push_proto = htons(ETH_P_8021Q);
 		}
 
-		if (tb[TCA_VLAN_PUSH_VLAN_PRIORITY])
+		push_prio_exists = !!tb[TCA_VLAN_PUSH_VLAN_PRIORITY];
+		if (push_prio_exists)
 			push_prio = nla_get_u8(tb[TCA_VLAN_PUSH_VLAN_PRIORITY]);
 		break;
 	default:
@@ -216,6 +218,7 @@ static int tcf_vlan_init(struct net *net, struct nlattr *nla,
 	p->tcfv_action = action;
 	p->tcfv_push_vid = push_vid;
 	p->tcfv_push_prio = push_prio;
+	p->tcfv_push_prio_exists = push_prio_exists || action == TCA_VLAN_ACT_PUSH;
 	p->tcfv_push_proto = push_proto;
 
 	spin_lock_bh(&v->tcf_lock);
Signature · 1 line
2.30.2
author maintainer
#196 lore raw

PATCH 196/348 RDMA/core: Sanitize WQ state received from the userspace

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

[ Upstream commit f97442887275d11c88c2899e720fe945c1f61488 ]

The mlx4 and mlx5 implemented differently the WQ input checks. Instead of duplicating mlx4 logic in the mlx5, let's prepare the input in the central place.

The mlx5 implementation didn't check for validity of state input. It is not real bug because our FW checked that, but still worth to fix.

---
 drivers/infiniband/core/uverbs_cmd.c | 21 +++++++++++++++++++--
 drivers/infiniband/hw/mlx4/qp.c      |  9 ++-------
 drivers/infiniband/hw/mlx5/qp.c      |  6 ++----
 3 files changed, 23 insertions(+), 13 deletions(-)
drivers/infiniband/core/uverbs_cmd.c +19 -2
index c398d1a64614..d413dafb9211 100644
@@ -3031,12 +3031,29 @@ static int ib_uverbs_ex_modify_wq(struct uverbs_attr_bundle *attrs)
 	if (!wq)
 		return -EINVAL;
 
-	wq_attr.curr_wq_state = cmd.curr_wq_state;
-	wq_attr.wq_state = cmd.wq_state;
 	if (cmd.attr_mask & IB_WQ_FLAGS) {
 		wq_attr.flags = cmd.flags;
 		wq_attr.flags_mask = cmd.flags_mask;
 	}
+
+	if (cmd.attr_mask & IB_WQ_CUR_STATE) {
+		if (cmd.curr_wq_state > IB_WQS_ERR)
+			return -EINVAL;
+
+		wq_attr.curr_wq_state = cmd.curr_wq_state;
+	} else {
+		wq_attr.curr_wq_state = wq->state;
+	}
+
+	if (cmd.attr_mask & IB_WQ_STATE) {
+		if (cmd.wq_state > IB_WQS_ERR)
+			return -EINVAL;
+
+		wq_attr.wq_state = cmd.wq_state;
+	} else {
+		wq_attr.wq_state = wq_attr.curr_wq_state;
+	}
+
 	ret = wq->device->ops.modify_wq(wq, &wq_attr, cmd.attr_mask,
 					&attrs->driver_udata);
 	uobj_put_obj_read(wq);
drivers/infiniband/hw/mlx4/qp.c +2 -7
index 6e2b3e2f83f1..17ce928e41bd 100644
@@ -4294,13 +4294,8 @@ int mlx4_ib_modify_wq(struct ib_wq *ibwq, struct ib_wq_attr *wq_attr,
 	if (wq_attr_mask & IB_WQ_FLAGS)
 		return -EOPNOTSUPP;
 
-	cur_state = wq_attr_mask & IB_WQ_CUR_STATE ? wq_attr->curr_wq_state :
-						     ibwq->state;
-	new_state = wq_attr_mask & IB_WQ_STATE ? wq_attr->wq_state : cur_state;
-
-	if (cur_state  < IB_WQS_RESET || cur_state  > IB_WQS_ERR ||
-	    new_state < IB_WQS_RESET || new_state > IB_WQS_ERR)
-		return -EINVAL;
+	cur_state = wq_attr->curr_wq_state;
+	new_state = wq_attr->wq_state;
 
 	if ((new_state == IB_WQS_RDY) && (cur_state == IB_WQS_ERR))
 		return -EINVAL;
drivers/infiniband/hw/mlx5/qp.c +2 -4
index 09e29c6cb66d..4540835e05bd 100644
@@ -6317,10 +6317,8 @@ int mlx5_ib_modify_wq(struct ib_wq *wq, struct ib_wq_attr *wq_attr,
 
 	rqc = MLX5_ADDR_OF(modify_rq_in, in, ctx);
 
-	curr_wq_state = (wq_attr_mask & IB_WQ_CUR_STATE) ?
-		wq_attr->curr_wq_state : wq->state;
-	wq_state = (wq_attr_mask & IB_WQ_STATE) ?
-		wq_attr->wq_state : curr_wq_state;
+	curr_wq_state = wq_attr->curr_wq_state;
+	wq_state = wq_attr->wq_state;
 	if (curr_wq_state == IB_WQS_ERR)
 		curr_wq_state = MLX5_RQC_STATE_ERR;
 	if (wq_state == IB_WQS_ERR)
Signature · 1 line
2.30.2
author maintainer
#197 lore raw

PATCH 197/348 RDMA/rxe: Fix failure during driver load

In reply to Greg Kroah-Hartman

From: Kamal Heib <[email protected]>

[ Upstream commit 32a25f2ea690dfaace19f7a3a916f5d7e1ddafe8 ]

To avoid the following failure when trying to load the rdma_rxe module while IPv6 is disabled, add a check for EAFNOSUPPORT and ignore the failure, also delete the needless debug print from rxe_setup_udp_tunnel().

$ modprobe rdma_rxe
modprobe: ERROR: could not insert 'rdma_rxe': Operation not permitted
Fixes dfdd6158ca2c ("IB/rxe: Fix kernel panic in udp_setup_tunnel")
---
 drivers/infiniband/sw/rxe/rxe_net.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/infiniband/sw/rxe/rxe_net.c +7 -3
index d41135682891..7d1df737c655 100644
@@ -251,10 +251,8 @@ static struct socket *rxe_setup_udp_tunnel(struct net *net, __be16 port,
 
 	/* Create UDP socket */
 	err = udp_sock_create(net, &udp_cfg, &sock);
-	if (err < 0) {
-		pr_err("failed to create udp socket. err = %d\n", err);
+	if (err < 0)
 		return ERR_PTR(err);
-	}
 
 	tnl_cfg.encap_type = 1;
 	tnl_cfg.encap_rcv = rxe_udp_encap_recv;
@@ -660,6 +658,12 @@ static int rxe_net_ipv6_init(void)
 
 	recv_sockets.sk6 = rxe_setup_udp_tunnel(&init_net,
 						htons(ROCE_V2_UDP_DPORT), true);
+	if (PTR_ERR(recv_sockets.sk6) == -EAFNOSUPPORT) {
+		recv_sockets.sk6 = NULL;
+		pr_warn("IPv6 is not supported, can not create a UDPv6 socket\n");
+		return 0;
+	}
+
 	if (IS_ERR(recv_sockets.sk6)) {
 		recv_sockets.sk6 = NULL;
 		pr_err("Failed to create IPv6 UDP tunnel\n");
Signature · 1 line
2.30.2
author maintainer
#198 lore raw

PATCH 198/348 drm: qxl: ensure surf.data is ininitialized

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit fbbf23ddb2a1cc0c12c9f78237d1561c24006f50 ]

The object surf is not fully initialized and the uninitialized field surf.data is being copied by the call to qxl_bo_create via the call to qxl_gem_object_create. Set surf.data to zero to ensure garbage data from the stack is not being copied.

Addresses-Coverity: ("Uninitialized scalar variable")

---
 drivers/gpu/drm/qxl/qxl_dumb.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/qxl/qxl_dumb.c +2 -0
index 272d19b677d8..4a0dc1348097 100644
@@ -58,6 +58,8 @@ int qxl_mode_dumb_create(struct drm_file *file_priv,
 	surf.height = args->height;
 	surf.stride = pitch;
 	surf.format = format;
+	surf.data = 0;
+
 	r = qxl_gem_object_create_with_handle(qdev, file_priv,
 					      QXL_GEM_DOMAIN_SURFACE,
 					      args->size, &surf, &qobj,
Signature · 1 line
2.30.2
author maintainer
#199 lore raw

PATCH 199/348 tools/bpftool: Fix error return code in do_batch()

In reply to Greg Kroah-Hartman

From: Zhihao Cheng <[email protected]>

[ Upstream commit ca16b429f39b4ce013bfa7e197f25681e65a2a42 ]

Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function.

---
 tools/bpf/bpftool/main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
tools/bpf/bpftool/main.c +3 -1
index 93d008687020..7d3cfb0ccbe6 100644
@@ -303,8 +303,10 @@ static int do_batch(int argc, char **argv)
 		n_argc = make_args(buf, n_argv, BATCH_ARG_NB_MAX, lines);
 		if (!n_argc)
 			continue;
-		if (n_argc < 0)
+		if (n_argc < 0) {
+			err = n_argc;
 			goto err_close;
+		}
 
 		if (json_output) {
 			jsonw_start_object(json_wtr);
Signature · 1 line
2.30.2
author maintainer
#200 lore raw

PATCH 200/348 ath10k: go to path err_unsupported when chip id is not supported

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 9e88dd431d2345acdb7a549f3e88aaf4c2a307a1 ]

When chip id is not supported, it go to path err_unsupported to print the error message.

Fixes f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection")
---
 drivers/net/wireless/ath/ath10k/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/pci.c +1 -1
index fd49d3419e79..53c791cc69a1 100644
@@ -3663,7 +3663,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_unsupported;
 
 	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id))
-		goto err_free_irq;
+		goto err_unsupported;
 
 	ret = ath10k_core_register(ar, &bus_params);
 	if (ret) {
Signature · 1 line
2.30.2
author maintainer
#201 lore raw

PATCH 201/348 ath10k: add missing error return code in ath10k_pci_probe()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit e2783e2f39ba99178dedfc1646d5cc0979d1bab3 ]

When chip_id is not supported, the resources will be freed on path err_unsupported, these resources will also be freed when calling ath10k_pci_remove(), it will cause double free, so return -ENODEV when it doesn't support the device with wrong chip_id.

Fixes c0c378f9907c ("ath10k: remove target soc ps code")
Fixes 7505f7c3ec1d ("ath10k: create a chip revision whitelist")
Fixes f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection")
---
 drivers/net/wireless/ath/ath10k/pci.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/net/wireless/ath/ath10k/pci.c +9 -3
index 53c791cc69a1..0f055e577749 100644
@@ -3647,8 +3647,10 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 			ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
 		if (bus_params.chip_id != 0xffffffff) {
 			if (!ath10k_pci_chip_is_supported(pdev->device,
-							  bus_params.chip_id))
+							  bus_params.chip_id)) {
+				ret = -ENODEV;
 				goto err_unsupported;
+			}
 		}
 	}
 
@@ -3659,11 +3661,15 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	}
 
 	bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
-	if (bus_params.chip_id == 0xffffffff)
+	if (bus_params.chip_id == 0xffffffff) {
+		ret = -ENODEV;
 		goto err_unsupported;
+	}
 
-	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id))
+	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) {
+		ret = -ENODEV;
 		goto err_unsupported;
+	}
 
 	ret = ath10k_core_register(ar, &bus_params);
 	if (ret) {
Signature · 1 line
2.30.2
author maintainer
#202 lore raw

PATCH 202/348 wireless: carl9170: fix LEDS build errors & warnings

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 272fdc0c4542fad173b44965be02a16d6db95499 ]

kernel test robot reports over 200 build errors and warnings that are due to this Kconfig problem when CARL9170=m, MAC80211=y, and LEDS_CLASS=m.

WARNING: unmet direct dependencies detected for MAC80211_LEDS
Depends on [n]: NET [=y] && WIRELESS [=y] && MAC80211 [=y] && (LEDS_CLASS [=m]=y || LEDS_CLASS [=m]=MAC80211 [=y]) Selected by [m]:
- CARL9170_LEDS [=y] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && CARL9170 [=m]

CARL9170_LEDS selects MAC80211_LEDS even though its kconfig dependencies are not met. This happens because 'select' does not follow any Kconfig dependency chains.

Fix this by making CARL9170_LEDS depend on MAC80211_LEDS, where the latter supplies any needed dependencies on LEDS_CLASS.

---
 drivers/net/wireless/ath/carl9170/Kconfig | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/net/wireless/ath/carl9170/Kconfig +3 -5
index b1bce7aad399..c2641edab0bc 100644
@@ -16,13 +16,11 @@ config CARL9170
 
 config CARL9170_LEDS
 	bool "SoftLED Support"
-	depends on CARL9170
-	select MAC80211_LEDS
-	select LEDS_CLASS
-	select NEW_LEDS
 	default y
+	depends on CARL9170
+	depends on MAC80211_LEDS
 	help
-	  This option is necessary, if you want your device' LEDs to blink
+	  This option is necessary, if you want your device's LEDs to blink.
 
 	  Say Y, unless you need the LEDs for firmware debugging.
 
Signature · 1 line
2.30.2
author maintainer
#203 lore raw

PATCH 203/348 ieee802154: hwsim: Fix possible memory leak in hwsim_subscribe_all_others

In reply to Greg Kroah-Hartman

From: Dongliang Mu <[email protected]>

[ Upstream commit ab372c2293f5d0b279f31c8d768566ea37602dc9 ]

In hwsim_subscribe_all_others, the error handling code performs incorrectly if the second hwsim_alloc_edge fails. When this issue occurs, it goes to sub_fail, without cleaning the edges allocated before.

---
 drivers/net/ieee802154/mac802154_hwsim.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ieee802154/mac802154_hwsim.c +2 -2
index c20e7ef18bc9..bf5ddd12a6f0 100644
@@ -715,6 +715,8 @@ static int hwsim_subscribe_all_others(struct hwsim_phy *phy)
 
 	return 0;
 
+sub_fail:
+	hwsim_edge_unsubscribe_me(phy);
 me_fail:
 	rcu_read_lock();
 	list_for_each_entry_rcu(e, &phy->edges, list) {
@@ -722,8 +724,6 @@ me_fail:
 		hwsim_free_edge(e);
 	}
 	rcu_read_unlock();
-sub_fail:
-	hwsim_edge_unsubscribe_me(phy);
 	return -ENOMEM;
 }
 
Signature · 1 line
2.30.2
author maintainer
#204 lore raw

PATCH 204/348 wcn36xx: Move hal_buf allocation to devm_kmalloc in probe

In reply to Greg Kroah-Hartman

From: Bryan O'Donoghue <[email protected]>

[ Upstream commit ef48667557c53d4b51a1ee3090eab7699324c9de ]

Right now wcn->hal_buf is allocated in wcn36xx_start(). This is a problem since we should have setup all of the buffers we required by the time ieee80211_register_hw() is called.

struct ieee80211_ops callbacks may run prior to mac_start() and therefore wcn->hal_buf must be initialized.

This is easily remediated by moving the allocation to probe() taking the opportunity to tidy up freeing memory by using devm_kmalloc().

Fixes 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
---
 drivers/net/wireless/ath/wcn36xx/main.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)
drivers/net/wireless/ath/wcn36xx/main.c +8 -13
index 46ae4ec4ad47..556ba3c6c5d8 100644
@@ -293,23 +293,16 @@ static int wcn36xx_start(struct ieee80211_hw *hw)
 		goto out_free_dxe_pool;
 	}
 
-	wcn->hal_buf = kmalloc(WCN36XX_HAL_BUF_SIZE, GFP_KERNEL);
-	if (!wcn->hal_buf) {
-		wcn36xx_err("Failed to allocate smd buf\n");
-		ret = -ENOMEM;
-		goto out_free_dxe_ctl;
-	}
-
 	ret = wcn36xx_smd_load_nv(wcn);
 	if (ret) {
 		wcn36xx_err("Failed to push NV to chip\n");
-		goto out_free_smd_buf;
+		goto out_free_dxe_ctl;
 	}
 
 	ret = wcn36xx_smd_start(wcn);
 	if (ret) {
 		wcn36xx_err("Failed to start chip\n");
-		goto out_free_smd_buf;
+		goto out_free_dxe_ctl;
 	}
 
 	if (!wcn36xx_is_fw_version(wcn, 1, 2, 2, 24)) {
@@ -336,8 +329,6 @@ static int wcn36xx_start(struct ieee80211_hw *hw)
 
 out_smd_stop:
 	wcn36xx_smd_stop(wcn);
-out_free_smd_buf:
-	kfree(wcn->hal_buf);
 out_free_dxe_ctl:
 	wcn36xx_dxe_free_ctl_blks(wcn);
 out_free_dxe_pool:
@@ -374,8 +365,6 @@ static void wcn36xx_stop(struct ieee80211_hw *hw)
 
 	wcn36xx_dxe_free_mem_pools(wcn);
 	wcn36xx_dxe_free_ctl_blks(wcn);
-
-	kfree(wcn->hal_buf);
 }
 
 static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
@@ -1322,6 +1311,12 @@ static int wcn36xx_probe(struct platform_device *pdev)
 	mutex_init(&wcn->hal_mutex);
 	mutex_init(&wcn->scan_lock);
 
+	wcn->hal_buf = devm_kmalloc(wcn->dev, WCN36XX_HAL_BUF_SIZE, GFP_KERNEL);
+	if (!wcn->hal_buf) {
+		ret = -ENOMEM;
+		goto out_wq;
+	}
+
 	ret = dma_set_mask_and_coherent(wcn->dev, DMA_BIT_MASK(32));
 	if (ret < 0) {
 		wcn36xx_err("failed to set DMA mask: %d\n", ret);
Signature · 1 line
2.30.2
author maintainer
#205 lore raw

PATCH 205/348 ssb: Fix error return code in ssb_bus_scan()

In reply to Greg Kroah-Hartman

From: Zhen Lei <[email protected]>

[ Upstream commit 77a0989baa427dbd242c5784d05a53ca3d197d43 ]

Fix to return -EINVAL from the error handling case instead of 0, as done elsewhere in this function.

---
 drivers/ssb/scan.c | 1 +
 1 file changed, 1 insertion(+)
drivers/ssb/scan.c +1 -0
index 6ceee98ed6ff..5c7e61cafd19 100644
@@ -325,6 +325,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
 	if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
 		pr_err("More than %d ssb cores found (%d)\n",
 		       SSB_MAX_NR_CORES, bus->nr_devices);
+		err = -EINVAL;
 		goto err_unmap;
 	}
 	if (bus->bustype == SSB_BUSTYPE_SSB) {
Signature · 1 line
2.30.2
author maintainer
#206 lore raw

PATCH 206/348 brcmfmac: fix setting of station info chains bitmask

In reply to Greg Kroah-Hartman

From: Alvin Šipraga <[email protected]>

[ Upstream commit feb45643762172110cb3a44f99dd54304f33b711 ]

The sinfo->chains field is a bitmask for filled values in chain_signal and chain_signal_avg, not a count. Treat it as such so that the driver can properly report per-chain RSSI information.

Before (MIMO mode):

  $ iw dev wlan0 station dump
      ...
      signal: -51 [-51] dBm

After (MIMO mode):

  $ iw dev wlan0 station dump
      ...
      signal: -53 [-53, -54] dBm
Fixes cae355dc90db ("brcmfmac: Add RSSI information to get_station.")
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +1 -2
index cd813c69a178..626449c1e897 100644
@@ -2683,6 +2683,7 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 		count_rssi = 0;
 		for (i = 0; i < BRCMF_ANT_MAX; i++) {
 			if (sta_info_le.rssi[i]) {
+				sinfo->chains |= BIT(count_rssi);
 				sinfo->chain_signal_avg[count_rssi] =
 					sta_info_le.rssi[i];
 				sinfo->chain_signal[count_rssi] =
@@ -2693,8 +2694,6 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 		}
 		if (count_rssi) {
 			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL);
-			sinfo->chains = count_rssi;
-
 			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
 			total_rssi /= count_rssi;
 			sinfo->signal = total_rssi;
Signature · 1 line
2.30.2
author maintainer
#207 lore raw

PATCH 207/348 brcmfmac: correctly report average RSSI in station info

In reply to Greg Kroah-Hartman

From: Alvin Šipraga <[email protected]>

[ Upstream commit 9a1590934d9a02e570636432b93052c0c035f31f ]

The rx_lastpkt_rssi field provided by the firmware is suitable for NL80211_STA_INFO_{SIGNAL,CHAIN_SIGNAL}, while the rssi field is an average. Fix up the assignments and set the correct STA_INFO bits. This lets userspace know that the average RSSI is part of the station info.

Fixes cae355dc90db ("brcmfmac: Add RSSI information to get_station.")
---
 .../broadcom/brcm80211/brcmfmac/cfg80211.c    | 36 ++++++++++---------
 1 file changed, 20 insertions(+), 16 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +20 -16
index 626449c1e897..6439adcd2f99 100644
@@ -2612,8 +2612,9 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 	struct brcmf_sta_info_le sta_info_le;
 	u32 sta_flags;
 	u32 is_tdls_peer;
-	s32 total_rssi;
-	s32 count_rssi;
+	s32 total_rssi_avg = 0;
+	s32 total_rssi = 0;
+	s32 count_rssi = 0;
 	int rssi;
 	u32 i;
 
@@ -2679,24 +2680,27 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_BYTES);
 			sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes);
 		}
-		total_rssi = 0;
-		count_rssi = 0;
 		for (i = 0; i < BRCMF_ANT_MAX; i++) {
-			if (sta_info_le.rssi[i]) {
-				sinfo->chains |= BIT(count_rssi);
-				sinfo->chain_signal_avg[count_rssi] =
-					sta_info_le.rssi[i];
-				sinfo->chain_signal[count_rssi] =
-					sta_info_le.rssi[i];
-				total_rssi += sta_info_le.rssi[i];
-				count_rssi++;
-			}
+			if (sta_info_le.rssi[i] == 0 ||
+			    sta_info_le.rx_lastpkt_rssi[i] == 0)
+				continue;
+			sinfo->chains |= BIT(count_rssi);
+			sinfo->chain_signal[count_rssi] =
+				sta_info_le.rx_lastpkt_rssi[i];
+			sinfo->chain_signal_avg[count_rssi] =
+				sta_info_le.rssi[i];
+			total_rssi += sta_info_le.rx_lastpkt_rssi[i];
+			total_rssi_avg += sta_info_le.rssi[i];
+			count_rssi++;
 		}
 		if (count_rssi) {
-			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL);
 			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
-			total_rssi /= count_rssi;
-			sinfo->signal = total_rssi;
+			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL_AVG);
+			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL);
+			sinfo->filled |=
+				BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL_AVG);
+			sinfo->signal = total_rssi / count_rssi;
+			sinfo->signal_avg = total_rssi_avg / count_rssi;
 		} else if (test_bit(BRCMF_VIF_STATUS_CONNECTED,
 			&ifp->vif->sme_state)) {
 			memset(&scb_val, 0, sizeof(scb_val));
Signature · 1 line
2.30.2
author maintainer
#208 lore raw

PATCH 208/348 brcmsmac: mac80211_if: Fix a resource leak in an error handling path

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 9a25344d5177c2b9285532236dc3d10a091f39a8 ]

If 'brcms_attach()' fails, we must undo the previous 'ieee80211_alloc_hw()' as already done in the remove function.

---
 .../wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c    | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c +7 -1
index 6188275b17e5..288d4d4d4454 100644
@@ -1223,6 +1223,7 @@ static int brcms_bcma_probe(struct bcma_device *pdev)
 {
 	struct brcms_info *wl;
 	struct ieee80211_hw *hw;
+	int ret;
 
 	dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
 		 pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
@@ -1247,11 +1248,16 @@ static int brcms_bcma_probe(struct bcma_device *pdev)
 	wl = brcms_attach(pdev);
 	if (!wl) {
 		pr_err("%s: brcms_attach failed!\n", __func__);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_free_ieee80211;
 	}
 	brcms_led_register(wl);
 
 	return 0;
+
+err_free_ieee80211:
+	ieee80211_free_hw(hw);
+	return ret;
 }
 
 static int brcms_suspend(struct bcma_device *pdev)
Signature · 1 line
2.30.2
author maintainer
#209 lore raw

PATCH 209/348 ath10k: Fix an error code in ath10k_add_interface()

In reply to Greg Kroah-Hartman

From: Yang Li <[email protected]>

[ Upstream commit e9ca70c735ce66fc6a0e02c8b6958434f74ef8de ]

When the code execute this if statement, the value of ret is 0. However, we can see from the ath10k_warn() log that the value of ret should be -EINVAL.

Clean up smatch warning:

drivers/net/wireless/ath/ath10k/mac.c:5596 ath10k_add_interface() warn:
missing error code 'ret'

Fixes ccec9038c721 ("ath10k: enable raw encap mode and software crypto engine")
---
 drivers/net/wireless/ath/ath10k/mac.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/ath/ath10k/mac.c +1 -0
index 47b733fdf4fc..20e248fd4364 100644
@@ -5267,6 +5267,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 
 	if (arvif->nohwcrypt &&
 	    !test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
+		ret = -EINVAL;
 		ath10k_warn(ar, "cryptmode module param needed for sw crypto\n");
 		goto err;
 	}
Signature · 1 line
2.30.2
author maintainer
#210 lore raw

PATCH 210/348 netlabel: Fix memory leak in netlbl_mgmt_add_common

In reply to Greg Kroah-Hartman

From: Liu Shixin <[email protected]>

[ Upstream commit b8f6b0522c298ae9267bd6584e19b942a0636910 ]

Hulk Robot reported memory leak in netlbl_mgmt_add_common. The problem is non-freed map in case of netlbl_domhsh_add() failed.

BUG: memory leak
unreferenced object 0xffff888100ab7080 (size 96):
  comm "syz-executor537", pid 360, jiffies 4294862456 (age 22.678s)
  hex dump (first 32 bytes):
    05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01  ................
  backtrace:
    [<0000000008b40026>] netlbl_mgmt_add_common.isra.0+0xb2a/0x1b40
    [<000000003be10950>] netlbl_mgmt_add+0x271/0x3c0
    [<00000000c70487ed>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320
    [<000000001f2ff614>] genl_rcv_msg+0x2bf/0x4f0
    [<0000000089045792>] netlink_rcv_skb+0x134/0x3d0
    [<0000000020e96fdd>] genl_rcv+0x24/0x40
    [<0000000042810c66>] netlink_unicast+0x4a0/0x6a0
    [<000000002e1659f0>] netlink_sendmsg+0x789/0xc70
    [<000000006e43415f>] sock_sendmsg+0x139/0x170
    [<00000000680a73d7>] ____sys_sendmsg+0x658/0x7d0
    [<0000000065cbb8af>] ___sys_sendmsg+0xf8/0x170
    [<0000000019932b6c>] __sys_sendmsg+0xd3/0x190
    [<00000000643ac172>] do_syscall_64+0x37/0x90
    [<000000009b79d6dc>] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping")
---
 net/netlabel/netlabel_mgmt.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
net/netlabel/netlabel_mgmt.c +10 -9
index e7a25fbfaf8b..a92ed37d0922 100644
@@ -76,6 +76,7 @@ static const struct nla_policy netlbl_mgmt_genl_policy[NLBL_MGMT_A_MAX + 1] = {
 static int netlbl_mgmt_add_common(struct genl_info *info,
 				  struct netlbl_audit *audit_info)
 {
+	void *pmap = NULL;
 	int ret_val = -EINVAL;
 	struct netlbl_domaddr_map *addrmap = NULL;
 	struct cipso_v4_doi *cipsov4 = NULL;
@@ -175,6 +176,7 @@ static int netlbl_mgmt_add_common(struct genl_info *info,
 			ret_val = -ENOMEM;
 			goto add_free_addrmap;
 		}
+		pmap = map;
 		map->list.addr = addr->s_addr & mask->s_addr;
 		map->list.mask = mask->s_addr;
 		map->list.valid = 1;
@@ -183,10 +185,8 @@ static int netlbl_mgmt_add_common(struct genl_info *info,
 			map->def.cipso = cipsov4;
 
 		ret_val = netlbl_af4list_add(&map->list, &addrmap->list4);
-		if (ret_val != 0) {
-			kfree(map);
-			goto add_free_addrmap;
-		}
+		if (ret_val != 0)
+			goto add_free_map;
 
 		entry->family = AF_INET;
 		entry->def.type = NETLBL_NLTYPE_ADDRSELECT;
@@ -223,6 +223,7 @@ static int netlbl_mgmt_add_common(struct genl_info *info,
 			ret_val = -ENOMEM;
 			goto add_free_addrmap;
 		}
+		pmap = map;
 		map->list.addr = *addr;
 		map->list.addr.s6_addr32[0] &= mask->s6_addr32[0];
 		map->list.addr.s6_addr32[1] &= mask->s6_addr32[1];
@@ -235,10 +236,8 @@ static int netlbl_mgmt_add_common(struct genl_info *info,
 			map->def.calipso = calipso;
 
 		ret_val = netlbl_af6list_add(&map->list, &addrmap->list6);
-		if (ret_val != 0) {
-			kfree(map);
-			goto add_free_addrmap;
-		}
+		if (ret_val != 0)
+			goto add_free_map;
 
 		entry->family = AF_INET6;
 		entry->def.type = NETLBL_NLTYPE_ADDRSELECT;
@@ -248,10 +247,12 @@ static int netlbl_mgmt_add_common(struct genl_info *info,
 
 	ret_val = netlbl_domhsh_add(entry, audit_info);
 	if (ret_val != 0)
-		goto add_free_addrmap;
+		goto add_free_map;
 
 	return 0;
 
+add_free_map:
+	kfree(pmap);
 add_free_addrmap:
 	kfree(addrmap);
 add_doi_put_def:
Signature · 1 line
2.30.2
author maintainer
#211 lore raw

PATCH 211/348 RDMA/mlx5: Dont add slave port to unaffiliated list

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

[ Upstream commit 7ce6095e3bff8e20ce018b050960b527e298f7df ]

The mlx5_ib_bind_slave_port() doesn't remove multiport device from the unaffiliated list, but mlx5_ib_unbind_slave_port() did it. This unbalanced flow caused to the situation where mlx5_ib_unaffiliated_port_list was changed during iteration.

---
 drivers/infiniband/hw/mlx5/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/hw/mlx5/main.c +2 -2
index a173737cb022..be624e613719 100644
@@ -5871,8 +5871,6 @@ static void mlx5_ib_unbind_slave_port(struct mlx5_ib_dev *ibdev,
 
 	port->mp.mpi = NULL;
 
-	list_add_tail(&mpi->list, &mlx5_ib_unaffiliated_port_list);
-
 	spin_unlock(&port->mp.mpi_lock);
 
 	err = mlx5_nic_vport_unaffiliate_multiport(mpi->mdev);
@@ -6026,6 +6024,8 @@ static void mlx5_ib_cleanup_multiport_master(struct mlx5_ib_dev *dev)
 			} else {
 				mlx5_ib_dbg(dev, "unbinding port_num: %d\n", i + 1);
 				mlx5_ib_unbind_slave_port(dev, dev->port[i].mp.mpi);
+				list_add_tail(&dev->port[i].mp.mpi->list,
+					      &mlx5_ib_unaffiliated_port_list);
 			}
 		}
 	}
Signature · 1 line
2.30.2
author maintainer
#212 lore raw

PATCH 212/348 netfilter: nft_exthdr: check for IPv6 packet before further processing

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit cdd73cc545c0fb9b1a1f7b209f4f536e7990cff4 ]

ipv6_find_hdr() does not validate that this is an IPv6 packet. Add a sanity check for calling ipv6_find_hdr() to make sure an IPv6 packet is passed for parsing.

Fixes 96518518cc41 ("netfilter: add nftables")
---
 net/netfilter/nft_exthdr.c | 3 +++
 1 file changed, 3 insertions(+)
net/netfilter/nft_exthdr.c +3 -0
index 427d77b111b1..00f4323cfeb8 100644
@@ -42,6 +42,9 @@ static void nft_exthdr_ipv6_eval(const struct nft_expr *expr,
 	unsigned int offset = 0;
 	int err;
 
+	if (pkt->skb->protocol != htons(ETH_P_IPV6))
+		goto err;
+
 	err = ipv6_find_hdr(pkt->skb, &offset, priv->type, NULL, NULL);
 	if (priv->flags & NFT_EXTHDR_F_PRESENT) {
 		nft_reg_store8(dest, err >= 0);
Signature · 1 line
2.30.2
author maintainer
#213 lore raw

PATCH 213/348 netfilter: nft_osf: check for TCP packet before further processing

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 8f518d43f89ae00b9cf5460e10b91694944ca1a8 ]

The osf expression only supports for TCP packets, add a upfront sanity check to skip packet parsing if this is not a TCP packet.

Fixes b96af92d6eaf ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
---
 net/netfilter/nft_osf.c | 5 +++++
 1 file changed, 5 insertions(+)
net/netfilter/nft_osf.c +5 -0
index b42247aa48a9..4911f8eb394f 100644
@@ -28,6 +28,11 @@ static void nft_osf_eval(const struct nft_expr *expr, struct nft_regs *regs,
 	struct nf_osf_data data;
 	struct tcphdr _tcph;
 
+	if (pkt->tprot != IPPROTO_TCP) {
+		regs->verdict.code = NFT_BREAK;
+		return;
+	}
+
 	tcp = skb_header_pointer(skb, ip_hdrlen(skb),
 				 sizeof(struct tcphdr), &_tcph);
 	if (!tcp) {
Signature · 1 line
2.30.2
author maintainer
#214 lore raw

PATCH 214/348 netfilter: nft_tproxy: restrict support to TCP and UDP transport protocols

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 52f0f4e178c757b3d356087376aad8bd77271828 ]

Add unfront check for TCP and UDP packets before performing further processing.

Fixes 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
---
 net/netfilter/nft_tproxy.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
net/netfilter/nft_tproxy.c +8 -1
index 95980154ef02..b97ab1198b03 100644
@@ -30,6 +30,12 @@ static void nft_tproxy_eval_v4(const struct nft_expr *expr,
 	__be16 tport = 0;
 	struct sock *sk;
 
+	if (pkt->tprot != IPPROTO_TCP &&
+	    pkt->tprot != IPPROTO_UDP) {
+		regs->verdict.code = NFT_BREAK;
+		return;
+	}
+
 	hp = skb_header_pointer(skb, ip_hdrlen(skb), sizeof(_hdr), &_hdr);
 	if (!hp) {
 		regs->verdict.code = NFT_BREAK;
@@ -91,7 +97,8 @@ static void nft_tproxy_eval_v6(const struct nft_expr *expr,
 
 	memset(&taddr, 0, sizeof(taddr));
 
-	if (!pkt->tprot_set) {
+	if (pkt->tprot != IPPROTO_TCP &&
+	    pkt->tprot != IPPROTO_UDP) {
 		regs->verdict.code = NFT_BREAK;
 		return;
 	}
Signature · 1 line
2.30.2
author maintainer
#215 lore raw

PATCH 215/348 RDMA/rxe: Fix qp reference counting for atomic ops

In reply to Greg Kroah-Hartman

From: Bob Pearson <[email protected]>

[ Upstream commit 15ae1375ea91ae2dee6f12d71a79d8c0a10a30bf ]

Currently the rdma_rxe driver attempts to protect atomic responder resources by taking a reference to the qp which is only freed when the resource is recycled for a new read or atomic operation. This means that in normal circumstances there is almost always an extra qp reference once an atomic operation has been executed which prevents cleaning up the qp and associated pd and cqs when the qp is destroyed.

This patch removes the call to rxe_add_ref() in send_atomic_ack() and the call to rxe_drop_ref() in free_rd_atomic_resource(). If the qp is destroyed while a peer is retrying an atomic op it will cause the operation to fail which is acceptable.

---
 drivers/infiniband/sw/rxe/rxe_qp.c   | 1 -
 drivers/infiniband/sw/rxe/rxe_resp.c | 2 --
 2 files changed, 3 deletions(-)
drivers/infiniband/sw/rxe/rxe_qp.c +0 -1
index d427a343c09f..53166b9ae67e 100644
@@ -152,7 +152,6 @@ static void free_rd_atomic_resources(struct rxe_qp *qp)
 void free_rd_atomic_resource(struct rxe_qp *qp, struct resp_res *res)
 {
 	if (res->type == RXE_ATOMIC_MASK) {
-		rxe_drop_ref(qp);
 		kfree_skb(res->atomic.skb);
 	} else if (res->type == RXE_READ_MASK) {
 		if (res->read.mr)
drivers/infiniband/sw/rxe/rxe_resp.c +0 -2
index c4a8195bf670..186152bf7951 100644
@@ -993,8 +993,6 @@ static int send_atomic_ack(struct rxe_qp *qp, struct rxe_pkt_info *pkt,
 		goto out;
 	}
 
-	rxe_add_ref(qp);
-
 	res = &qp->resp.resources[qp->resp.res_head];
 	free_rd_atomic_resource(qp, res);
 	rxe_advance_resp_resource(qp);
Signature · 1 line
2.30.2
author maintainer
#216 lore raw

PATCH 216/348 samples/bpf: Fix the error return code of xdp_redirects main()

In reply to Greg Kroah-Hartman

From: Wang Hai <[email protected]>

[ Upstream commit 7c6090ee2a7b3315410cfc83a94c3eb057407b25 ]

Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function.

If bpf_map_update_elem() failed, main() should return a negative error.

Fixes 832622e6bd18 ("xdp: sample program for new bpf_redirect helper")
---
 samples/bpf/xdp_redirect_user.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
samples/bpf/xdp_redirect_user.c +1 -1
index 5440cd620607..b7bc2a339d77 100644
@@ -216,5 +216,5 @@ int main(int argc, char **argv)
 	poll_stats(2, ifindex_out);
 
 out:
-	return 0;
+	return ret;
 }
Signature · 1 line
2.30.2
author maintainer
#217 lore raw

PATCH 217/348 net: ethernet: aeroflex: fix UAF in greth_of_remove

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit e3a5de6d81d8b2199935c7eb3f7d17a50a7075b7 ]

static int greth_of_remove(struct platform_device *of_dev) {
...

	struct greth_private *greth = netdev_priv(ndev);
...
	unregister_netdev(ndev);
	free_netdev(ndev);

	of_iounmap(&of_dev->resource[0], greth->regs, resource_size(&of_dev->resource[0]));

...
}

greth is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing greth pointer. So, fix it by moving free_netdev() after of_iounmap() call.

Fixes d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
---
 drivers/net/ethernet/aeroflex/greth.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/aeroflex/greth.c +2 -1
index 2a9f8643629c..907904c0a288 100644
@@ -1541,10 +1541,11 @@ static int greth_of_remove(struct platform_device *of_dev)
 	mdiobus_unregister(greth->mdio);
 
 	unregister_netdev(ndev);
-	free_netdev(ndev);
 
 	of_iounmap(&of_dev->resource[0], greth->regs, resource_size(&of_dev->resource[0]));
 
+	free_netdev(ndev);
+
 	return 0;
 }
 
Signature · 1 line
2.30.2
author maintainer
#218 lore raw

PATCH 218/348 net: ethernet: ezchip: fix UAF in nps_enet_remove

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit e4b8700e07a86e8eab6916aa5c5ba99042c34089 ]

priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv pointer. So, fix it by moving free_netdev() after netif_napi_del() call.

Fixes 0dd077093636 ("NET: Add ezchip ethernet driver")
---
 drivers/net/ethernet/ezchip/nps_enet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/ezchip/nps_enet.c +1 -1
index 815fb62c4b02..026a3ec19b6e 100644
@@ -645,8 +645,8 @@ static s32 nps_enet_remove(struct platform_device *pdev)
 	struct nps_enet_priv *priv = netdev_priv(ndev);
 
 	unregister_netdev(ndev);
-	free_netdev(ndev);
 	netif_napi_del(&priv->napi);
+	free_netdev(ndev);
 
 	return 0;
 }
Signature · 1 line
2.30.2
author maintainer
#219 lore raw

PATCH 219/348 net: ethernet: ezchip: fix error handling

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit 0de449d599594f5472e00267d651615c7f2c6c1d ]

As documented at drivers/base/platform.c for platform_get_irq:

* Gets an IRQ for a platform device and prints an error message if finding the
* IRQ fails. Device drivers should check the return value for errors so as to
* not pass a negative integer value to the request_irq() APIs.

So, the driver should check that platform_get_irq() return value is _negative_, not that it's equal to zero, because -ENXIO (return value from request_irq() if irq was not found) will
pass this check and it leads to passing negative irq to request_irq()

Fixes 0dd077093636 ("NET: Add ezchip ethernet driver")
---
 drivers/net/ethernet/ezchip/nps_enet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/ezchip/nps_enet.c +1 -1
index 026a3ec19b6e..3d74401b4f10 100644
@@ -610,7 +610,7 @@ static s32 nps_enet_probe(struct platform_device *pdev)
 
 	/* Get IRQ number */
 	priv->irq = platform_get_irq(pdev, 0);
-	if (!priv->irq) {
+	if (priv->irq < 0) {
 		dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
 		err = -ENODEV;
 		goto out_netdev;
Signature · 1 line
2.30.2
author maintainer
#220 lore raw

PATCH 220/348 vrf: do not push non-ND strict packets with a source LLA through packet taps again

In reply to Greg Kroah-Hartman

From: Antoine Tenart <[email protected]>

[ Upstream commit 603113c514e95c3350598bc3cccbd03af7ea4ab2 ]

Non-ND strict packets with a source LLA go through the packet taps again, while non-ND strict packets with other source addresses do not, and we can see a clone of those packets on the vrf interface (we should not). This is due to a series of changes:

Commit 6f12fa775530[1] made non-ND strict packets not being pushed again in the packet taps. This changed with commit 205704c618af[2] for those packets having a source LLA, as they need a lookup with the orig_iif.

The issue now is those packets do not skip the 'vrf_ip6_rcv' function to the end (as the ones without a source LLA) and go through the check to call packet taps again. This check was changed by commit 6f12fa775530[1] and do not exclude non-strict packets anymore. Packets matching 'need_strict && !is_ndisc && is_ll_src' are now being sent through the packet taps again. This can be seen by dumping packets on the vrf interface.

Fix this by having the same code path for all non-ND strict packets and selectively lookup with the orig_iif for those with a source LLA. This has the effect to revert to the pre-205704c618af[2] condition, which should also be easier to maintain.

[1] 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF")
[2] 205704c618af ("vrf: packets with lladdr src needs dst at input with orig_iif when needs strict")

Fixes 205704c618af ("vrf: packets with lladdr src needs dst at input with orig_iif when needs strict")
Cc Stephen Suryaputra <[email protected]>
---
 drivers/net/vrf.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/net/vrf.c +7 -7
index 1267786d2931..f08ed52d51f3 100644
@@ -1035,22 +1035,22 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
 	int orig_iif = skb->skb_iif;
 	bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
 	bool is_ndisc = ipv6_ndisc_frame(skb);
-	bool is_ll_src;
 
 	/* loopback, multicast & non-ND link-local traffic; do not push through
 	 * packet taps again. Reset pkt_type for upper layers to process skb.
-	 * for packets with lladdr src, however, skip so that the dst can be
-	 * determine at input using original ifindex in the case that daddr
-	 * needs strict
+	 * For strict packets with a source LLA, determine the dst using the
+	 * original ifindex.
 	 */
-	is_ll_src = ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL;
-	if (skb->pkt_type == PACKET_LOOPBACK ||
-	    (need_strict && !is_ndisc && !is_ll_src)) {
+	if (skb->pkt_type == PACKET_LOOPBACK || (need_strict && !is_ndisc)) {
 		skb->dev = vrf_dev;
 		skb->skb_iif = vrf_dev->ifindex;
 		IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
+
 		if (skb->pkt_type == PACKET_LOOPBACK)
 			skb->pkt_type = PACKET_HOST;
+		else if (ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL)
+			vrf_ip6_input_dst(skb, vrf_dev, orig_iif);
+
 		goto out;
 	}
 
Signature · 1 line
2.30.2
author maintainer
#221 lore raw

PATCH 221/348 net: sched: add barrier to ensure correct ordering for lockless qdisc

In reply to Greg Kroah-Hartman

From: Yunsheng Lin <[email protected]>

[ Upstream commit 89837eb4b2463c556a123437f242d6c2bc62ce81 ]

The spin_trylock() was assumed to contain the implicit barrier needed to ensure the correct ordering between STATE_MISSED setting/clearing and STATE_MISSED checking in commit a90c57f2cedd ("net: sched: fix packet stuck problem for lockless qdisc").

But it turns out that spin_trylock() only has load-acquire semantic, for strongly-ordered system(like x86), the compiler barrier implicitly contained in spin_trylock() seems enough to ensure the correct ordering. But for weakly-orderly system (like arm64), the store-release semantic is needed to ensure the correct ordering as clear_bit() and test_bit() is store operation, see queued_spin_lock().

So add the explicit barrier to ensure the correct ordering for the above case.

Fixes a90c57f2cedd ("net: sched: fix packet stuck problem for lockless qdisc")
---
 include/net/sch_generic.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)
include/net/sch_generic.h +12 -0
index 0852f3e51360..0cb0a4bcb544 100644
@@ -160,6 +160,12 @@ static inline bool qdisc_run_begin(struct Qdisc *qdisc)
 		if (spin_trylock(&qdisc->seqlock))
 			goto nolock_empty;
 
+		/* Paired with smp_mb__after_atomic() to make sure
+		 * STATE_MISSED checking is synchronized with clearing
+		 * in pfifo_fast_dequeue().
+		 */
+		smp_mb__before_atomic();
+
 		/* If the MISSED flag is set, it means other thread has
 		 * set the MISSED flag before second spin_trylock(), so
 		 * we can return false here to avoid multi cpus doing
@@ -177,6 +183,12 @@ static inline bool qdisc_run_begin(struct Qdisc *qdisc)
 		 */
 		set_bit(__QDISC_STATE_MISSED, &qdisc->state);
 
+		/* spin_trylock() only has load-acquire semantic, so use
+		 * smp_mb__after_atomic() to ensure STATE_MISSED is set
+		 * before doing the second spin_trylock().
+		 */
+		smp_mb__after_atomic();
+
 		/* Retry again in case other CPU may not see the new flag
 		 * after it releases the lock at the end of qdisc_run_end().
 		 */
Signature · 1 line
2.30.2
author maintainer
#222 lore raw

PATCH 222/348 tls: prevent oversized sendfile() hangs by ignoring MSG_MORE

In reply to Greg Kroah-Hartman

From: Jakub Kicinski <[email protected]>

[ Upstream commit d452d48b9f8b1a7f8152d33ef52cfd7fe1735b0a ]

We got multiple reports that multi_chunk_sendfile test case from tls selftest fails. This was sort of expected, as the original fix was never applied (see it in the first Link:). The test in question uses sendfile() with count larger than the size of the underlying file. This will make splice set MSG_MORE on all sendpage calls, meaning TLS will never close and flush the last partial record.

Eric seem to have addressed a similar problem in
commit 35f9c09fe9c7 ("tcp: tcp_sendpages() should call tcp_push() once") by introducing MSG_SENDPAGE_NOTLAST. Unlike MSG_MORE MSG_SENDPAGE_NOTLAST is not set on the last call
of a "pipefull" of data (PIPE_DEF_BUFFERS == 16,
so every 16 pages or whenever we run out of data).

Having a break every 16 pages should be fine, TLS can pack exactly 4 pages into a record, so for aligned reads there should be no difference, unaligned may see one extra record per sendpage().

Sticking to TCP semantics seems preferable to modifying splice, but we can revisit it if real life scenarios show a regression.

---
 net/tls/tls_sw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/tls/tls_sw.c +1 -1
index cdb65aa54be7..7fb5c067f429 100644
@@ -1150,7 +1150,7 @@ static int tls_sw_do_sendpage(struct sock *sk, struct page *page,
 	int ret = 0;
 	bool eor;
 
-	eor = !(flags & (MSG_MORE | MSG_SENDPAGE_NOTLAST));
+	eor = !(flags & MSG_SENDPAGE_NOTLAST);
 	sk_clear_bit(SOCKWQ_ASYNC_NOSPACE, sk);
 
 	/* Call the sk_stream functions to manage the sndbuf mem. */
Signature · 1 line
2.30.2
author maintainer
#223 lore raw

PATCH 223/348 pkt_sched: sch_qfq: fix qfq_change_class() error path

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 0cd58e5c53babb9237b741dbef711f0a9eb6d3fd ]

If qfq_change_class() is unable to allocate memory for qfq_aggregate, it frees the class that has been inserted in the class hash table, but does not unhash it.

Defer the insertion after the problematic allocation.

BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:884 [inline]
BUG: KASAN: use-after-free in qdisc_class_hash_insert+0x200/0x210 net/sched/sch_api.c:731
Write of size 8 at addr ffff88814a534f10 by task syz-executor.4/31478

CPU: 0 PID: 31478 Comm: syz-executor.4 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x141/0x1d7 lib/dump_stack.c:120
 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:233
 __kasan_report mm/kasan/report.c:419 [inline]
 kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:436
 hlist_add_head include/linux/list.h:884 [inline]
 qdisc_class_hash_insert+0x200/0x210 net/sched/sch_api.c:731
 qfq_change_class+0x96c/0x1990 net/sched/sch_qfq.c:489
 tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665d9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdc7b5f0188 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000056bf80 RCX: 00000000004665d9
RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003
RBP: 00007fdc7b5f01d0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ffcf7310b3f R14: 00007fdc7b5f0300 R15: 0000000000022000

Allocated by task 31445:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:428 [inline]
 ____kasan_kmalloc mm/kasan/common.c:507 [inline]
 ____kasan_kmalloc mm/kasan/common.c:466 [inline]
 __kasan_kmalloc+0x9b/0xd0 mm/kasan/common.c:516
 kmalloc include/linux/slab.h:556 [inline]
 kzalloc include/linux/slab.h:686 [inline]
 qfq_change_class+0x705/0x1990 net/sched/sch_qfq.c:464
 tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 31445:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
 kasan_set_track+0x1c/0x30 mm/kasan/common.c:46
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:357
 ____kasan_slab_free mm/kasan/common.c:360 [inline]
 ____kasan_slab_free mm/kasan/common.c:325 [inline]
 __kasan_slab_free+0xfb/0x130 mm/kasan/common.c:368
 kasan_slab_free include/linux/kasan.h:212 [inline]
 slab_free_hook mm/slub.c:1583 [inline]
 slab_free_freelist_hook+0xdf/0x240 mm/slub.c:1608
 slab_free mm/slub.c:3168 [inline]
 kfree+0xe5/0x7f0 mm/slub.c:4212
 qfq_change_class+0x10fb/0x1990 net/sched/sch_qfq.c:518
 tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff88814a534f00
 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 16 bytes inside of
 128-byte region [ffff88814a534f00, ffff88814a534f80)
The buggy address belongs to the page:
page:ffffea0005294d00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a534
flags: 0x57ff00000000200(slab|node=1|zone=2|lastcpupid=0x7ff)
raw: 057ff00000000200 ffffea00004fee00 0000000600000006 ffff8880110418c0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 29797, ts 604817765317, free_ts 604810151744
 prep_new_page mm/page_alloc.c:2358 [inline]
 get_page_from_freelist+0x1033/0x2b60 mm/page_alloc.c:3994
 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5200
 alloc_pages+0x18c/0x2a0 mm/mempolicy.c:2272
 alloc_slab_page mm/slub.c:1646 [inline]
 allocate_slab+0x2c5/0x4c0 mm/slub.c:1786
 new_slab mm/slub.c:1849 [inline]
 new_slab_objects mm/slub.c:2595 [inline]
 ___slab_alloc+0x4a1/0x810 mm/slub.c:2758
 __slab_alloc.constprop.0+0xa7/0xf0 mm/slub.c:2798
 slab_alloc_node mm/slub.c:2880 [inline]
 slab_alloc mm/slub.c:2922 [inline]
 __kmalloc+0x315/0x330 mm/slub.c:4050
 kmalloc include/linux/slab.h:561 [inline]
 kzalloc include/linux/slab.h:686 [inline]
 __register_sysctl_table+0x112/0x1090 fs/proc/proc_sysctl.c:1318
 mpls_dev_sysctl_register+0x1b7/0x2d0 net/mpls/af_mpls.c:1421
 mpls_add_dev net/mpls/af_mpls.c:1472 [inline]
 mpls_dev_notify+0x214/0x8b0 net/mpls/af_mpls.c:1588
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2121
 call_netdevice_notifiers_extack net/core/dev.c:2133 [inline]
 call_netdevice_notifiers net/core/dev.c:2147 [inline]
 register_netdevice+0x106b/0x1500 net/core/dev.c:10312
 veth_newlink+0x585/0xac0 drivers/net/veth.c:1547
 __rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3452
 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1298 [inline]
 free_pcp_prepare+0x223/0x300 mm/page_alloc.c:1342
 free_unref_page_prepare mm/page_alloc.c:3250 [inline]
 free_unref_page+0x12/0x1d0 mm/page_alloc.c:3298
 __vunmap+0x783/0xb60 mm/vmalloc.c:2566
 free_work+0x58/0x70 mm/vmalloc.c:80
 process_one_work+0x98d/0x1600 kernel/workqueue.c:2276
 worker_thread+0x64c/0x1120 kernel/workqueue.c:2422
 kthread+0x3b1/0x4a0 kernel/kthread.c:313
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

Memory state around the buggy address:
 ffff88814a534e00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88814a534e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88814a534f00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                         ^
 ffff88814a534f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88814a535000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fixes 462dbc9101acd ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
---
 net/sched/sch_qfq.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
net/sched/sch_qfq.c +3 -5
index 0b05ac7c848e..b046fd3cac2c 100644
@@ -485,11 +485,6 @@ static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 
 	if (cl->qdisc != &noop_qdisc)
 		qdisc_hash_add(cl->qdisc, true);
-	sch_tree_lock(sch);
-	qdisc_class_hash_insert(&q->clhash, &cl->common);
-	sch_tree_unlock(sch);
-
-	qdisc_class_hash_grow(sch, &q->clhash);
 
 set_change_agg:
 	sch_tree_lock(sch);
@@ -507,8 +502,11 @@ set_change_agg:
 	}
 	if (existing)
 		qfq_deact_rm_from_agg(q, cl);
+	else
+		qdisc_class_hash_insert(&q->clhash, &cl->common);
 	qfq_add_to_agg(q, new_agg, cl);
 	sch_tree_unlock(sch);
+	qdisc_class_hash_grow(sch, &q->clhash);
 
 	*arg = (unsigned long)cl;
 	return 0;
Signature · 1 line
2.30.2
author maintainer
#224 lore raw

PATCH 224/348 vxlan: add missing rcu_read_lock() in neigh_reduce()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 85e8b032d6ebb0f698a34dd22c2f13443d905888 ]

syzbot complained in neigh_reduce(), because rcu_read_lock_bh() is treated differently than rcu_read_lock()

WARNING: suspicious RCU usage
5.13.0-rc6-syzkaller #0 Not tainted
-----------------------------
include/net/addrconf.h:313 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by kworker/0:0/5:
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic64_set include/asm-generic/atomic-instrumented.h:856 [inline] #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic_long_set include/asm-generic/atomic-long.h:41 [inline] #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:617 [inline] #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:644 [inline] #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x871/0x1600 kernel/workqueue.c:2247 #1: ffffc90000ca7da8 ((work_completion)(&port->wq)){+.+.}-{0:0}, at: process_one_work+0x8a5/0x1600 kernel/workqueue.c:2251 #2: ffffffff8bf795c0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1da/0x3130 net/core/dev.c:4180

stack backtrace:
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events ipvlan_process_multicast
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x141/0x1d7 lib/dump_stack.c:120
 __in6_dev_get include/net/addrconf.h:313 [inline]
 __in6_dev_get include/net/addrconf.h:311 [inline]
 neigh_reduce drivers/net/vxlan.c:2167 [inline]
 vxlan_xmit+0x34d5/0x4c30 drivers/net/vxlan.c:2919
 __netdev_start_xmit include/linux/netdevice.h:4944 [inline]
 netdev_start_xmit include/linux/netdevice.h:4958 [inline]
 xmit_one net/core/dev.c:3654 [inline]
 dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3670
 __dev_queue_xmit+0x2133/0x3130 net/core/dev.c:4246
 ipvlan_process_multicast+0xa99/0xd70 drivers/net/ipvlan/ipvlan_core.c:287
 process_one_work+0x98d/0x1600 kernel/workqueue.c:2276
 worker_thread+0x64c/0x1120 kernel/workqueue.c:2422
 kthread+0x3b1/0x4a0 kernel/kthread.c:313
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Fixes f564f45c4518 ("vxlan: add ipv6 proxy support")
---
 drivers/net/vxlan.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/vxlan.c +2 -0
index 8443df79fabc..c5991e31c557 100644
@@ -1995,6 +1995,7 @@ static int neigh_reduce(struct net_device *dev, struct sk_buff *skb, __be32 vni)
 	struct neighbour *n;
 	struct nd_msg *msg;
 
+	rcu_read_lock();
 	in6_dev = __in6_dev_get(dev);
 	if (!in6_dev)
 		goto out;
@@ -2046,6 +2047,7 @@ static int neigh_reduce(struct net_device *dev, struct sk_buff *skb, __be32 vni)
 	}
 
 out:
+	rcu_read_unlock();
 	consume_skb(skb);
 	return NETDEV_TX_OK;
 }
Signature · 1 line
2.30.2
author maintainer
#225 lore raw

PATCH 225/348 net/ipv4: swap flow ports when validating source

In reply to Greg Kroah-Hartman

From: Miao Wang <[email protected]>

[ Upstream commit c69f114d09891adfa3e301a35d9e872b8b7b5a50 ]

When doing source address validation, the flowi4 struct used for fib_lookup should be in the reverse direction to the given skb. fl4_dport and fl4_sport returned by fib4_rules_early_flow_dissect should thus be swapped.

Fixes 5a847a6e1477 ("net/ipv4: Initialize proto and ports in flow struct")
---
 net/ipv4/fib_frontend.c | 2 ++
 1 file changed, 2 insertions(+)
net/ipv4/fib_frontend.c +2 -0
index 2ce191019526..b875b98820ed 100644
@@ -381,6 +381,8 @@ static int __fib_validate_source(struct sk_buff *skb, __be32 src, __be32 dst,
 		fl4.flowi4_proto = 0;
 		fl4.fl4_sport = 0;
 		fl4.fl4_dport = 0;
+	} else {
+		swap(fl4.fl4_sport, fl4.fl4_dport);
 	}
 
 	if (fib_lookup(net, &fl4, &res, 0))
Signature · 1 line
2.30.2
author maintainer
#226 lore raw

PATCH 226/348 tc-testing: fix list handling

In reply to Greg Kroah-Hartman

From: Marcelo Ricardo Leitner <[email protected]>

[ Upstream commit b4fd096cbb871340be837491fa1795864a48b2d9 ]

python lists don't have an 'add' method, but 'append'.

Fixes 14e5175e9e04 ("tc-testing: introduce scapyPlugin for basic traffic")
---
 tools/testing/selftests/tc-testing/plugin-lib/scapyPlugin.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/tc-testing/plugin-lib/scapyPlugin.py +1 -1
index 229ee185b27e..a7b21658af9b 100644
@@ -36,7 +36,7 @@ class SubPlugin(TdcPlugin):
         for k in scapy_keys:
             if k not in scapyinfo:
                 keyfail = True
-                missing_keys.add(k)
+                missing_keys.append(k)
         if keyfail:
             print('{}: Scapy block present in the test, but is missing info:'
                 .format(self.sub_class))
Signature · 1 line
2.30.2
author maintainer
#227 lore raw

PATCH 227/348 ieee802154: hwsim: Fix memory leak in hwsim_add_one

In reply to Greg Kroah-Hartman

From: Dongliang Mu <[email protected]>

[ Upstream commit 28a5501c3383f0e6643012c187b7c2027ef42aea ]

No matter from hwsim_remove or hwsim_del_radio_nl, hwsim_del fails to remove the entry in the edges list. Take the example below, phy0, phy1 and e0 will be deleted, resulting in e1 not freed and accessed in the future.

              hwsim_phys
                  |
    ------------------------------
    |                            |

phy0 (edges) phy1 (edges)
----> e1 (idx = 1) ----> e0 (idx = 0)

Fix this by deleting and freeing all the entries in the edges list between hwsim_edge_unsubscribe_me and list_del(&phy->list).

---
 drivers/net/ieee802154/mac802154_hwsim.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/ieee802154/mac802154_hwsim.c +5 -0
index bf5ddd12a6f0..b6d967ae6b41 100644
@@ -824,12 +824,17 @@ err_pib:
 static void hwsim_del(struct hwsim_phy *phy)
 {
 	struct hwsim_pib *pib;
+	struct hwsim_edge *e;
 
 	hwsim_edge_unsubscribe_me(phy);
 
 	list_del(&phy->list);
 
 	rcu_read_lock();
+	list_for_each_entry_rcu(e, &phy->edges, list) {
+		list_del_rcu(&e->list);
+		hwsim_free_edge(e);
+	}
 	pib = rcu_dereference(phy->pib);
 	rcu_read_unlock();
 
Signature · 1 line
2.30.2
author maintainer
#228 lore raw

PATCH 228/348 ieee802154: hwsim: avoid possible crash in hwsim_del_edge_nl()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 0303b30375dff5351a79cc2c3c87dfa4fda29bed ]

Both MAC802154_HWSIM_ATTR_RADIO_ID and MAC802154_HWSIM_ATTR_RADIO_EDGE must be present to avoid a crash.

Fixes f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Cc Alexander Aring <[email protected]>
Cc Stefan Schmidt <[email protected]>
---
 drivers/net/ieee802154/mac802154_hwsim.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ieee802154/mac802154_hwsim.c +1 -1
index b6d967ae6b41..79d74763cf24 100644
@@ -480,7 +480,7 @@ static int hwsim_del_edge_nl(struct sk_buff *msg, struct genl_info *info)
 	struct hwsim_edge *e;
 	u32 v0, v1;
 
-	if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID] &&
+	if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID] ||
 	    !info->attrs[MAC802154_HWSIM_ATTR_RADIO_EDGE])
 		return -EINVAL;
 
Signature · 1 line
2.30.2
author maintainer
#229 lore raw

PATCH 229/348 mac80211: remove iwlwifi specific workaround NDPs of null_response

In reply to Greg Kroah-Hartman

From: Ping-Ke Shih <[email protected]>

[ Upstream commit 744757e46bf13ec3a7b3507d17ab3faab9516d43 ]

Remove the remaining workaround that is not removed by the commit e41eb3e408de ("mac80211: remove iwlwifi specific workaround that broke sta NDP tx")

---
 net/mac80211/sta_info.c | 5 -----
 1 file changed, 5 deletions(-)
net/mac80211/sta_info.c +0 -5
index 82a1dd7b7d68..7b2e8c890381 100644
@@ -1395,11 +1395,6 @@ static void ieee80211_send_null_response(struct sta_info *sta, int tid,
 	struct ieee80211_tx_info *info;
 	struct ieee80211_chanctx_conf *chanctx_conf;
 
-	/* Don't send NDPs when STA is connected HE */
-	if (sdata->vif.type == NL80211_IFTYPE_STATION &&
-	    !(sdata->u.mgd.flags & IEEE80211_STA_DISABLE_HE))
-		return;
-
 	if (qos) {
 		fc = cpu_to_le16(IEEE80211_FTYPE_DATA |
 				 IEEE80211_STYPE_QOS_NULLFUNC |
Signature · 1 line
2.30.2
author maintainer
#230 lore raw

PATCH 230/348 net: bcmgenet: Fix attaching to PYH failed on RPi 4B

In reply to Greg Kroah-Hartman

From: Jian-Hong Pan <[email protected]>

[ Upstream commit b2ac9800cfe0f8da16abc4e74e003440361c112e ]

The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late. So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads GENET fail to attach the PHY as following log:

bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
...
could not attach to PHY
bcmgenet fd580000.ethernet eth0: failed to connect to PHY uart-pl011 fe201000.serial: no DMA platform data
libphy: bcmgenet MII bus: probed
...
unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus

This patch adds the soft dependency to load mdio-bcm-unimac module before genet module to avoid the issue.

Fixes 9a4e79697009 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver")
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/broadcom/genet/bcmgenet.c +1 -0
index b27da024aa9d..21669a42718c 100644
@@ -3741,3 +3741,4 @@ MODULE_AUTHOR("Broadcom Corporation");
 MODULE_DESCRIPTION("Broadcom GENET Ethernet controller driver");
 MODULE_ALIAS("platform:bcmgenet");
 MODULE_LICENSE("GPL");
+MODULE_SOFTDEP("pre: mdio-bcm-unimac");
Signature · 1 line
2.30.2
author maintainer
#231 lore raw

PATCH 231/348 ipv6: exthdrs: do not blindly use init_net

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit bcc3f2a829b9edbe3da5fb117ee5a63686d31834 ]

I see no reason why max_dst_opts_cnt and max_hbh_opts_cnt are fetched from the initial net namespace.

The other sysctls (max_dst_opts_len & max_hbh_opts_len) are in fact already using the current ns.

Note: it is not clear why ipv6_destopt_rcv() use two ways to get to the netns :

1) dev_net(dst->dev)
Originally used to increment IPSTATS_MIB_INHDRERRORS

2) dev_net(skb->dev)
Tom used this variant in his patch.

Maybe this calls to use ipv6_skb_net() instead ?

Fixes 47d3d7ac656a ("ipv6: Implement limits on Hop-by-Hop and Destination options")
Cc Tom Herbert <[email protected]>
Cc Coco Li <[email protected]>
---
 net/ipv6/exthdrs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/ipv6/exthdrs.c +2 -2
index ab5add0fe6b4..413a47ca43e9 100644
@@ -305,7 +305,7 @@ fail_and_free:
 #endif
 
 	if (ip6_parse_tlv(tlvprocdestopt_lst, skb,
-			  init_net.ipv6.sysctl.max_dst_opts_cnt)) {
+			  net->ipv6.sysctl.max_dst_opts_cnt)) {
 		skb->transport_header += extlen;
 		opt = IP6CB(skb);
 #if IS_ENABLED(CONFIG_IPV6_MIP6)
@@ -844,7 +844,7 @@ fail_and_free:
 
 	opt->flags |= IP6SKB_HOPBYHOP;
 	if (ip6_parse_tlv(tlvprochopopt_lst, skb,
-			  init_net.ipv6.sysctl.max_hbh_opts_cnt)) {
+			  net->ipv6.sysctl.max_hbh_opts_cnt)) {
 		skb->transport_header += extlen;
 		opt = IP6CB(skb);
 		opt->nhoff = sizeof(struct ipv6hdr);
Signature · 1 line
2.30.2
author maintainer
#232 lore raw

PATCH 232/348 bpf: Do not change gso_size during bpf_skb_change_proto()

In reply to Greg Kroah-Hartman

From: Maciej Żenczykowski <[email protected]>

[ Upstream commit 364745fbe981a4370f50274475da4675661104df ]

This is technically a backwards incompatible change in behaviour, but I'm going to argue that it is very unlikely to break things, and likely to fix *far* more then it breaks.

In no particular order, various reasons follow:

(a) I've long had a bug assigned to myself to debug a super rare kernel crash on Android Pixel phones which can (per stacktrace) be traced back to BPF clat IPv6 to IPv4 protocol conversion causing some sort of ugly failure much later on during transmit deep in the GSO engine, AFAICT precisely because of this change to gso_size, though I've never been able to manually reproduce it. I believe it may be related to the particular network offload support of attached USB ethernet dongle being used for tethering off of an IPv6-only cellular connection. The reason might be we end up with more segments than max permitted, or with a GSO packet with only one segment... (either way we break some assumption and hit a BUG_ON)

(b) There is no check that the gso_size is > 20 when reducing it by 20, so we might end up with a negative (or underflowing) gso_size or a gso_size of 0. This can't possibly be good. Indeed this is probably somehow exploitable (or at least can result in a kernel crash) by delivering crafted packets and perhaps triggering an infinite loop or a divide by zero... As a reminder: gso_size (MSS) is related to MTU, but not directly derived from it: gso_size/MSS may be significantly smaller then one would get by deriving from local MTU. And on some NICs (which do loose MTU checking on receive, it may even potentially be larger, for example my work pc with 1500 MTU can receive 1520 byte frames [and sometimes does due to bugs in a vendor plat46 implementation]). Indeed even just going from 21 to 1 is potentially problematic because it increases the number of segments by a factor of 21 (think DoS, or some other crash due to too many segments).

(c) It's always safe to not increase the gso_size, because it doesn't result in the max packet size increasing. So the skb_increase_gso_size() call was always unnecessary for correctness (and outright undesirable, see later). As such the only part which is potentially dangerous (ie. could cause backwards compatibility issues) is the removal of the skb_decrease_gso_size() call.

(d) If the packets are ultimately destined to the local device, then there is absolutely no benefit to playing around with gso_size. It only matters if the packets will egress the device. ie. we're either forwarding, or transmitting from the device.

(e) This logic only triggers for packets which are GSO. It does not trigger for skbs which are not GSO. It will not convert a non-GSO MTU sized packet into a GSO packet (and you don't even know what the MTU is, so you can't even fix it). As such your transmit path must *already* be able to handle an MTU 20 bytes larger then your receive path (for IPv4 to IPv6 translation) - and indeed 28 bytes larger due to IPv4 fragments. Thus removing the skb_decrease_gso_size() call doesn't actually increase the size of the packets your transmit side must be able to handle. ie. to handle non-GSO max-MTU packets, the IPv4/IPv6 device/ route MTUs must already be set correctly. Since for example with an IPv4 egress MTU of 1500, IPv4 to IPv6 translation will already build 1520 byte IPv6 frames, so you need a 1520 byte device MTU. This means if your IPv6 device's egress MTU is 1280, your IPv4 route must be 1260 (and actually 1252, because of the need to handle fragments). This is to handle normal non-GSO packets. Thus the reduction is simply not needed for GSO packets, because when they're correctly built, they will already be the right size.

(f) TSO/GSO should be able to exactly undo GRO: the number of packets (TCP segments) should not be modified, so that TCP's MSS counting works correctly (this matters for congestion control). If protocol conversion changes the gso_size, then the number of TCP segments may increase or decrease. Packet loss after protocol conversion can result in partial loss of MSS segments that the sender sent. How's the sending TCP stack going to react to receiving ACKs/SACKs in the middle of the segments it sent?

(g) skb_{decrease,increase}_gso_size() are already no-ops for GSO_BY_FRAGS case (besides triggering WARN_ON_ONCE). This means you already cannot guarantee that gso_size (and thus resulting packet MTU) is changed. ie. you must assume it won't be changed.

(h) changing gso_size is outright buggy for UDP GSO packets, where framing matters (I believe that's also the case for SCTP, but it's already excluded by [g]). So the only remaining case is TCP, which also doesn't want it (see [f]).

(i) see also the reasoning on the previous attempt at fixing this (commit fa7b83bf3b156c767f3e4a25bbf3817b08f3ff8e) which shows that the current behaviour causes TCP packet loss:

In the forwarding path GRO -> BPF 6 to 4 -> GSO for TCP traffic, the coalesced packet payload can be > MSS, but < MSS + 20.

bpf_skb_proto_6_to_4() will upgrade the MSS and it can be > the payload length. After then tcp_gso_segment checks for the payload length if it is <= MSS. The condition is causing the packet to be dropped.

  tcp_gso_segment():
    [...]
    mss = skb_shinfo(skb)->gso_size;
    if (unlikely(skb->len <= mss)) goto out;
    [...]

Thus changing the gso_size is simply a very bad idea. Increasing is unnecessary and buggy, and decreasing can go negative.

---
 net/core/filter.c | 4 ----
 1 file changed, 4 deletions(-)
net/core/filter.c +0 -4
index 108bcf600052..0e161a6dff7e 100644
@@ -2861,8 +2861,6 @@ static int bpf_skb_proto_4_to_6(struct sk_buff *skb)
 			shinfo->gso_type |=  SKB_GSO_TCPV6;
 		}
 
-		/* Due to IPv6 header, MSS needs to be downgraded. */
-		skb_decrease_gso_size(shinfo, len_diff);
 		/* Header must be checked, and gso_segs recomputed. */
 		shinfo->gso_type |= SKB_GSO_DODGY;
 		shinfo->gso_segs = 0;
@@ -2902,8 +2900,6 @@ static int bpf_skb_proto_6_to_4(struct sk_buff *skb)
 			shinfo->gso_type |=  SKB_GSO_TCPV4;
 		}
 
-		/* Due to IPv4 header, MSS can be upgraded. */
-		skb_increase_gso_size(shinfo, len_diff);
 		/* Header must be checked, and gso_segs recomputed. */
 		shinfo->gso_type |= SKB_GSO_DODGY;
 		shinfo->gso_segs = 0;
Signature · 1 line
2.30.2
author maintainer
#233 lore raw

PATCH 233/348 i40e: Fix error handling in i40e_vsi_open

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit 9c04cfcd4aad232e36306cdc5c74cd9fc9148a7e ]

When vsi->type == I40E_VSI_FDIR, we have caught the return value of i40e_vsi_request_irq() but without further handling. Check and execute memory clean on failure just like the other i40e_vsi_request_irq().

Fixes 8a9eb7d3cbcab ("i40e: rework fdir setup and teardown")
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_main.c +2 -0
index a1b4e995f2b7..4f4ec1f166ef 100644
@@ -8292,6 +8292,8 @@ int i40e_vsi_open(struct i40e_vsi *vsi)
 			 dev_driver_string(&pf->pdev->dev),
 			 dev_name(&pf->pdev->dev));
 		err = i40e_vsi_request_irq(vsi, int_name);
+		if (err)
+			goto err_setup_rx;
 
 	} else {
 		err = -EINVAL;
Signature · 1 line
2.30.2
author maintainer
#234 lore raw

PATCH 234/348 i40e: Fix autoneg disabling for non-10GBaseT links

In reply to Greg Kroah-Hartman

From: Mateusz Palczewski <[email protected]>

[ Upstream commit 9262793e59f0423437166a879a73d056b1fe6f9a ]

Disabling autonegotiation was allowed only for 10GBaseT PHY. The condition was changed to check if link media type is BaseT.

Fixes 3ce12ee9d8f9 ("i40e: Fix order of checks when enabling/disabling autoneg in ethtool")
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_ethtool.c +1 -2
index e4d0b7747e84..2288a3855e52 100644
@@ -1259,8 +1259,7 @@ static int i40e_set_link_ksettings(struct net_device *netdev,
 			if (ethtool_link_ksettings_test_link_mode(&safe_ks,
 								  supported,
 								  Autoneg) &&
-			    hw->phy.link_info.phy_type !=
-			    I40E_PHY_TYPE_10GBASE_T) {
+			    hw->phy.media_type != I40E_MEDIA_TYPE_BASET) {
 				netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
 				err = -EINVAL;
 				goto done;
Signature · 1 line
2.30.2
author maintainer
#235 lore raw

PATCH 235/348 Revert "ibmvnic: remove duplicate napi_schedule call in open function"

In reply to Greg Kroah-Hartman

From: Dany Madden <[email protected]>

[ Upstream commit 2ca220f92878470c6ba03f9946e412323093cc94 ]

This reverts commit 7c451f3ef676c805a4b77a743a01a5c21a250a73.

When a vnic interface is taken down and then up, connectivity is not restored. We bisected it to this commit. Reverting this commit until we can fully investigate the issue/benefit of the change.

Fixes 7c451f3ef676 ("ibmvnic: remove duplicate napi_schedule call in open function")
---
 drivers/net/ethernet/ibm/ibmvnic.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/ethernet/ibm/ibmvnic.c +5 -0
index a2b7b982ee29..a3d64e61035e 100644
@@ -1088,6 +1088,11 @@ static int __ibmvnic_open(struct net_device *netdev)
 
 	netif_tx_start_all_queues(netdev);
 
+	if (prev_state == VNIC_CLOSED) {
+		for (i = 0; i < adapter->req_rx_queues; i++)
+			napi_schedule(&adapter->napi[i]);
+	}
+
 	adapter->state = VNIC_OPEN;
 	return rc;
 }
Signature · 1 line
2.30.2
author maintainer
#236 lore raw

PATCH 236/348 ibmvnic: free tx_pool if tso_pool alloc fails

In reply to Greg Kroah-Hartman

From: Sukadev Bhattiprolu <[email protected]>

[ Upstream commit f6ebca8efa52e4ae770f0325d618e7bcf08ada0c ]

Free tx_pool and clear it, if allocation of tso_pool fails.

release_tx_pools() assumes we have both tx and tso_pools if ->tx_pool is non-NULL. If allocation of tso_pool fails in init_tx_pools(), the assumption will not be true and we would end up dereferencing ->tx_buff, ->free_map fields from a NULL pointer.

Fixes 3205306c6b8d ("ibmvnic: Update TX pool initialization routine")
---
 drivers/net/ethernet/ibm/ibmvnic.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/ethernet/ibm/ibmvnic.c +4 -1
index a3d64e61035e..ecfe588f330e 100644
@@ -694,8 +694,11 @@ static int init_tx_pools(struct net_device *netdev)
 
 	adapter->tso_pool = kcalloc(tx_subcrqs,
 				    sizeof(struct ibmvnic_tx_pool), GFP_KERNEL);
-	if (!adapter->tso_pool)
+	if (!adapter->tso_pool) {
+		kfree(adapter->tx_pool);
+		adapter->tx_pool = NULL;
 		return -1;
+	}
 
 	adapter->num_active_tx_pools = tx_subcrqs;
 
Signature · 1 line
2.30.2
author maintainer
#237 lore raw

PATCH 237/348 ipv6: fix out-of-bound access in ip6_parse_tlv()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 624085a31c1ad6a80b1e53f686bf6ee92abbf6e8 ]

First problem is that optlen is fetched without checking there is more than one byte to parse.

Fix this by taking care of IPV6_TLV_PAD1 before fetching optlen (under appropriate sanity checks against len)

Second problem is that IPV6_TLV_PADN checks of zero padding are performed before the check of remaining length.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes c1412fce7ecc ("net/ipv6/exthdrs.c: Strict PadN option checking")
Cc Paolo Abeni <[email protected]>
Cc Tom Herbert <[email protected]>
---
 net/ipv6/exthdrs.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)
net/ipv6/exthdrs.c +13 -14
index 413a47ca43e9..69128000bc31 100644
@@ -134,18 +134,23 @@ static bool ip6_parse_tlv(const struct tlvtype_proc *procs,
 	len -= 2;
 
 	while (len > 0) {
-		int optlen = nh[off + 1] + 2;
-		int i;
+		int optlen, i;
 
-		switch (nh[off]) {
-		case IPV6_TLV_PAD1:
-			optlen = 1;
+		if (nh[off] == IPV6_TLV_PAD1) {
 			padlen++;
 			if (padlen > 7)
 				goto bad;
-			break;
+			off++;
+			len--;
+			continue;
+		}
+		if (len < 2)
+			goto bad;
+		optlen = nh[off + 1] + 2;
+		if (optlen > len)
+			goto bad;
 
-		case IPV6_TLV_PADN:
+		if (nh[off] == IPV6_TLV_PADN) {
 			/* RFC 2460 states that the purpose of PadN is
 			 * to align the containing header to multiples
 			 * of 8. 7 is therefore the highest valid value.
@@ -162,12 +167,7 @@ static bool ip6_parse_tlv(const struct tlvtype_proc *procs,
 				if (nh[off + i] != 0)
 					goto bad;
 			}
-			break;
-
-		default: /* Other TLV code so scan list */
-			if (optlen > len)
-				goto bad;
-
+		} else {
 			tlv_count++;
 			if (tlv_count > max_count)
 				goto bad;
@@ -187,7 +187,6 @@ static bool ip6_parse_tlv(const struct tlvtype_proc *procs,
 				return false;
 
 			padlen = 0;
-			break;
 		}
 		off += optlen;
 		len -= optlen;
Signature · 1 line
2.30.2
author maintainer
#238 lore raw

PATCH 238/348 e1000e: Check the PCIm state

In reply to Greg Kroah-Hartman

From: Sasha Neftin <[email protected]>

[ Upstream commit 2e7256f12cdb16eaa2515b6231d665044a07c51a ]

Complete to commit def4ec6dce393e ("e1000e: PCIm function state support") Check the PCIm state only on CSME systems. There is no point to do this check on non CSME systems.
This patch fixes a generation a false-positive warning:
"Error in exiting dmoff"

Fixes def4ec6dce39 ("e1000e: PCIm function state support")
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 24 ++++++++++++----------
 1 file changed, 13 insertions(+), 11 deletions(-)
drivers/net/ethernet/intel/e1000e/netdev.c +13 -11
index c2feedfd321d..a06d514215ed 100644
@@ -5199,18 +5199,20 @@ static void e1000_watchdog_task(struct work_struct *work)
 			pm_runtime_resume(netdev->dev.parent);
 
 			/* Checking if MAC is in DMoff state*/
-			pcim_state = er32(STATUS);
-			while (pcim_state & E1000_STATUS_PCIM_STATE) {
-				if (tries++ == dmoff_exit_timeout) {
-					e_dbg("Error in exiting dmoff\n");
-					break;
-				}
-				usleep_range(10000, 20000);
+			if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
 				pcim_state = er32(STATUS);
-
-				/* Checking if MAC exited DMoff state */
-				if (!(pcim_state & E1000_STATUS_PCIM_STATE))
-					e1000_phy_hw_reset(&adapter->hw);
+				while (pcim_state & E1000_STATUS_PCIM_STATE) {
+					if (tries++ == dmoff_exit_timeout) {
+						e_dbg("Error in exiting dmoff\n");
+						break;
+					}
+					usleep_range(10000, 20000);
+					pcim_state = er32(STATUS);
+
+					/* Checking if MAC exited DMoff state */
+					if (!(pcim_state & E1000_STATUS_PCIM_STATE))
+						e1000_phy_hw_reset(&adapter->hw);
+				}
 			}
 
 			/* update snapshot of PHY registers on LSC */
Signature · 1 line
2.30.2
author maintainer
#239 lore raw

PATCH 239/348 bpfilter: Specify the log level for the kmsg message

In reply to Greg Kroah-Hartman

From: Gary Lin <[email protected]>

[ Upstream commit a196fa78a26571359740f701cf30d774eb8a72cb ]

Per the kmsg document [0], if we don't specify the log level with a prefix "<N>" in the message string, the default log level will be applied to the message. Since the default level could be warning(4), this would make the log utility such as journalctl treat the message, "Started bpfilter", as a warning. To avoid confusion, this commit adds the prefix "<5>" to make the message always a notice.

[0] https://www.kernel.org/doc/Documentation/ABI/testing/dev-kmsg

---
 net/bpfilter/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/bpfilter/main.c +1 -1
index 05e1cfc1e5cd..291a92546246 100644
@@ -57,7 +57,7 @@ int main(void)
 {
 	debug_f = fopen("/dev/kmsg", "w");
 	setvbuf(debug_f, 0, _IOLBF, 0);
-	fprintf(debug_f, "Started bpfilter\n");
+	fprintf(debug_f, "<5>Started bpfilter\n");
 	loop();
 	fclose(debug_f);
 	return 0;
Signature · 1 line
2.30.2
author maintainer
#240 lore raw

PATCH 240/348 gve: Fix swapped vars when fetching max queues

In reply to Greg Kroah-Hartman

From: Bailey Forrest <[email protected]>

[ Upstream commit 1db1a862a08f85edc36aad091236ac9b818e949e ]

Fixes 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
---
 drivers/net/ethernet/google/gve/gve_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/google/gve/gve_main.c +2 -2
index 6ea0975d74a1..1c4b35b1b359 100644
@@ -1118,8 +1118,8 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	gve_write_version(&reg_bar->driver_version);
 	/* Get max queues to alloc etherdev */
-	max_rx_queues = ioread32be(&reg_bar->max_tx_queues);
-	max_tx_queues = ioread32be(&reg_bar->max_rx_queues);
+	max_tx_queues = ioread32be(&reg_bar->max_tx_queues);
+	max_rx_queues = ioread32be(&reg_bar->max_rx_queues);
 	/* Alloc and setup the netdev and priv */
 	dev = alloc_etherdev_mqs(sizeof(*priv), max_tx_queues, max_rx_queues);
 	if (!dev) {
Signature · 1 line
2.30.2
author maintainer
#241 lore raw

PATCH 241/348 Revert "be2net: disable bh with spin_lock in be_process_mcc"

In reply to Greg Kroah-Hartman

From: Petr Oros <[email protected]>

[ Upstream commit d6765985a42a660f078896d5c5b27f97c580a490 ]

Patch was based on wrong presumption that be_poll can be called only from bh context. It reintroducing old regression (also reverted) and causing deadlock when we use netconsole with benet in bonding.

Old revert: commit 072a9c486004 ("netpoll: revert 6bdb7fe3104 and fix be_poll() instead")

[  331.269715] bond0: (slave enp0s7f0): Releasing backup interface
[  331.270121] CPU: 4 PID: 1479 Comm: ifenslave Not tainted 5.13.0-rc7+ #2
[  331.270122] Call Trace:
[  331.270122] [c00000001789f200] [c0000000008c505c] dump_stack+0x100/0x174 (unreliable)
[  331.270124] [c00000001789f240] [c008000001238b9c] be_poll+0x64/0xe90 [be2net]
[  331.270125] [c00000001789f330] [c000000000d1e6e4] netpoll_poll_dev+0x174/0x3d0
[  331.270127] [c00000001789f400] [c008000001bc167c] bond_poll_controller+0xb4/0x130 [bonding]
[  331.270128] [c00000001789f450] [c000000000d1e624] netpoll_poll_dev+0xb4/0x3d0
[  331.270129] [c00000001789f520] [c000000000d1ed88] netpoll_send_skb+0x448/0x470
[  331.270130] [c00000001789f5d0] [c0080000011f14f8] write_msg+0x180/0x1b0 [netconsole]
[  331.270131] [c00000001789f640] [c000000000230c0c] console_unlock+0x54c/0x790
[  331.270132] [c00000001789f7b0] [c000000000233098] vprintk_emit+0x2d8/0x450
[  331.270133] [c00000001789f810] [c000000000234758] vprintk+0xc8/0x270
[  331.270134] [c00000001789f850] [c000000000233c28] printk+0x40/0x54
[  331.270135] [c00000001789f870] [c000000000ccf908] __netdev_printk+0x150/0x198
[  331.270136] [c00000001789f910] [c000000000ccfdb4] netdev_info+0x68/0x94
[  331.270137] [c00000001789f950] [c008000001bcbd70] __bond_release_one+0x188/0x6b0 [bonding]
[  331.270138] [c00000001789faa0] [c008000001bcc6f4] bond_do_ioctl+0x42c/0x490 [bonding]
[  331.270139] [c00000001789fb60] [c000000000d0d17c] dev_ifsioc+0x17c/0x400
[  331.270140] [c00000001789fbc0] [c000000000d0db70] dev_ioctl+0x390/0x890
[  331.270141] [c00000001789fc10] [c000000000c7c76c] sock_do_ioctl+0xac/0x1b0
[  331.270142] [c00000001789fc90] [c000000000c7ffac] sock_ioctl+0x31c/0x6e0
[  331.270143] [c00000001789fd60] [c0000000005b9728] sys_ioctl+0xf8/0x150
[  331.270145] [c00000001789fdb0] [c0000000000336c0] system_call_exception+0x160/0x2f0
[  331.270146] [c00000001789fe10] [c00000000000d35c] system_call_common+0xec/0x278
[  331.270147] --- interrupt: c00 at 0x7fffa6c6ec00
[  331.270147] NIP:  00007fffa6c6ec00 LR: 0000000105c4185c CTR: 0000000000000000
[  331.270148] REGS: c00000001789fe80 TRAP: 0c00   Not tainted  (5.13.0-rc7+)
[  331.270148] MSR:  800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE>  CR: 28000428  XER: 00000000
[  331.270155] IRQMASK: 0
[  331.270156] GPR00: 0000000000000036 00007fffd494d5b0 00007fffa6d57100 0000000000000003
[  331.270158] GPR04: 0000000000008991 00007fffd494d6d0 0000000000000008 00007fffd494f28c
[  331.270161] GPR08: 0000000000000003 0000000000000000 0000000000000000 0000000000000000
[  331.270164] GPR12: 0000000000000000 00007fffa6dfa220 0000000000000000 0000000000000000
[  331.270167] GPR16: 0000000105c44880 0000000000000000 0000000105c60088 0000000105c60318
[  331.270170] GPR20: 0000000105c602c0 0000000105c44560 0000000000000000 0000000000000000
[  331.270172] GPR24: 00007fffd494dc50 00007fffd494d6a8 0000000105c60008 00007fffd494d6d0
[  331.270175] GPR28: 00007fffd494f27e 0000000105c6026c 00007fffd494f284 0000000000000000
[  331.270178] NIP [00007fffa6c6ec00] 0x7fffa6c6ec00
[  331.270178] LR [0000000105c4185c] 0x105c4185c
[  331.270179] --- interrupt: c00

This reverts commit d0d006a43e9a7a796f6f178839c92fcc222c564d.

Fixes d0d006a43e9a7a ("be2net: disable bh with spin_lock in be_process_mcc")
---
 drivers/net/ethernet/emulex/benet/be_cmds.c | 6 ++++--
 drivers/net/ethernet/emulex/benet/be_main.c | 2 ++
 2 files changed, 6 insertions(+), 2 deletions(-)
drivers/net/ethernet/emulex/benet/be_cmds.c +4 -2
index 701c12c9e033..649c5c429bd7 100644
@@ -550,7 +550,7 @@ int be_process_mcc(struct be_adapter *adapter)
 	int num = 0, status = 0;
 	struct be_mcc_obj *mcc_obj = &adapter->mcc_obj;
 
-	spin_lock_bh(&adapter->mcc_cq_lock);
+	spin_lock(&adapter->mcc_cq_lock);
 
 	while ((compl = be_mcc_compl_get(adapter))) {
 		if (compl->flags & CQE_FLAGS_ASYNC_MASK) {
@@ -566,7 +566,7 @@ int be_process_mcc(struct be_adapter *adapter)
 	if (num)
 		be_cq_notify(adapter, mcc_obj->cq.id, mcc_obj->rearm_cq, num);
 
-	spin_unlock_bh(&adapter->mcc_cq_lock);
+	spin_unlock(&adapter->mcc_cq_lock);
 	return status;
 }
 
@@ -581,7 +581,9 @@ static int be_mcc_wait_compl(struct be_adapter *adapter)
 		if (be_check_error(adapter, BE_ERROR_ANY))
 			return -EIO;
 
+		local_bh_disable();
 		status = be_process_mcc(adapter);
+		local_bh_enable();
 
 		if (atomic_read(&mcc_obj->q.used) == 0)
 			break;
drivers/net/ethernet/emulex/benet/be_main.c +2 -0
index 9aebb121365f..552877590a8a 100644
@@ -5631,7 +5631,9 @@ static void be_worker(struct work_struct *work)
 	 * mcc completions
 	 */
 	if (!netif_running(adapter->netdev)) {
+		local_bh_disable();
 		be_process_mcc(adapter);
+		local_bh_enable();
 		goto reschedule;
 	}
 
Signature · 1 line
2.30.2
author maintainer
#242 lore raw

PATCH 242/348 Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_valid

In reply to Greg Kroah-Hartman

From: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit 799acb9347915bfe4eac0ff2345b468f0a1ca207 ]

This fixes parsing of LTV entries when the length is 0.

Found with:

tools/mgmt-tester -s "Add Advertising - Success (ScRsp only)"

Add Advertising - Success (ScRsp only) - run
Sending Add Advertising (0x003e)
Test condition added, total 1

[   11.004577] ==================================================================
[   11.005292] BUG: KASAN: slab-out-of-bounds in tlv_data_is_valid+0x87/0xe0
[   11.005984] Read of size 1 at addr ffff888002c695b0 by task mgmt-tester/87
[   11.006711]
[   11.007176]
[   11.007429] Allocated by task 87:
[   11.008151]
[   11.008438] The buggy address belongs to the object at ffff888002c69580
[   11.008438]  which belongs to the cache kmalloc-64 of size 64
[   11.010526] The buggy address is located 48 bytes inside of
[   11.010526]  64-byte region [ffff888002c69580, ffff888002c695c0)
[   11.012423] The buggy address belongs to the page:
[   11.013291]
[   11.013544] Memory state around the buggy address:
[   11.014359]  ffff888002c69480: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.015453]  ffff888002c69500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.016232] >ffff888002c69580: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
[   11.017010]                                      ^
[   11.017547]  ffff888002c69600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
[   11.018296]  ffff888002c69680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.019116] ==================================================================
Fixes 2bb36870e8cb2 ("Bluetooth: Unify advertising instance flags check")
---
 net/bluetooth/mgmt.c | 3 +++
 1 file changed, 3 insertions(+)
net/bluetooth/mgmt.c +3 -0
index 5fce559a61bf..db525321da1f 100644
@@ -6461,6 +6461,9 @@ static bool tlv_data_is_valid(struct hci_dev *hdev, u32 adv_flags, u8 *data,
 	for (i = 0, cur_len = 0; i < len; i += (cur_len + 1)) {
 		cur_len = data[i];
 
+		if (!cur_len)
+			continue;
+
 		if (data[i + 1] == EIR_FLAGS &&
 		    (!is_adv_data || flags_managed(adv_flags)))
 			return false;
Signature · 1 line
2.30.2
author maintainer
#243 lore raw

PATCH 243/348 Bluetooth: Fix handling of HCI_LE_Advertising_Set_Terminated event

In reply to Greg Kroah-Hartman

From: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit 23837a6d7a1a61818ed94a6b8af552d6cf7d32d5 ]

Error status of this event means that it has ended due reasons other than a connection:

'If advertising has terminated as a result of the advertising duration elapsing, the Status parameter shall be set to the error code Advertising Timeout (0x3C).'

'If advertising has terminated because the Max_Extended_Advertising_Events was reached, the Status parameter shall be set to the error code Limit Reached (0x43).'

Fixes acf0aeae431a0 ("Bluetooth: Handle ADv set terminated event")
---
 net/bluetooth/hci_event.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
net/bluetooth/hci_event.c +12 -1
index bd678ffdaef7..e8e7f108b016 100644
@@ -5101,8 +5101,19 @@ static void hci_le_ext_adv_term_evt(struct hci_dev *hdev, struct sk_buff *skb)
 
 	BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
 
-	if (ev->status)
+	if (ev->status) {
+		struct adv_info *adv;
+
+		adv = hci_find_adv_instance(hdev, ev->handle);
+		if (!adv)
+			return;
+
+		/* Remove advertising as it has been terminated */
+		hci_remove_adv_instance(hdev, ev->handle);
+		mgmt_advertising_removed(NULL, hdev, ev->handle);
+
 		return;
+	}
 
 	conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->conn_handle));
 	if (conn) {
Signature · 1 line
2.30.2
author maintainer
#244 lore raw

PATCH 244/348 clk: actions: Fix UART clock dividers on Owl S500 SoC

In reply to Greg Kroah-Hartman

From: Cristian Ciocaltea <[email protected]>

[ Upstream commit 2dca2a619a907579e3e65e7c1789230c2b912e88 ]

Use correct divider registers for the Actions Semi Owl S500 SoC's UART clocks.

---
 drivers/clk/actions/owl-s500.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/clk/actions/owl-s500.c +6 -6
index 0eb83a0b70bc..6eeb7e290f40 100644
@@ -300,7 +300,7 @@ static OWL_COMP_FIXED_FACTOR(i2c3_clk, "i2c3_clk", "ethernet_pll_clk",
 static OWL_COMP_DIV(uart0_clk, "uart0_clk", uart_clk_mux_p,
 			OWL_MUX_HW(CMU_UART0CLK, 16, 1),
 			OWL_GATE_HW(CMU_DEVCLKEN1, 6, 0),
-			OWL_DIVIDER_HW(CMU_UART1CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
+			OWL_DIVIDER_HW(CMU_UART0CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
 			CLK_IGNORE_UNUSED);
 
 static OWL_COMP_DIV(uart1_clk, "uart1_clk", uart_clk_mux_p,
@@ -312,31 +312,31 @@ static OWL_COMP_DIV(uart1_clk, "uart1_clk", uart_clk_mux_p,
 static OWL_COMP_DIV(uart2_clk, "uart2_clk", uart_clk_mux_p,
 			OWL_MUX_HW(CMU_UART2CLK, 16, 1),
 			OWL_GATE_HW(CMU_DEVCLKEN1, 8, 0),
-			OWL_DIVIDER_HW(CMU_UART1CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
+			OWL_DIVIDER_HW(CMU_UART2CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
 			CLK_IGNORE_UNUSED);
 
 static OWL_COMP_DIV(uart3_clk, "uart3_clk", uart_clk_mux_p,
 			OWL_MUX_HW(CMU_UART3CLK, 16, 1),
 			OWL_GATE_HW(CMU_DEVCLKEN1, 19, 0),
-			OWL_DIVIDER_HW(CMU_UART1CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
+			OWL_DIVIDER_HW(CMU_UART3CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
 			CLK_IGNORE_UNUSED);
 
 static OWL_COMP_DIV(uart4_clk, "uart4_clk", uart_clk_mux_p,
 			OWL_MUX_HW(CMU_UART4CLK, 16, 1),
 			OWL_GATE_HW(CMU_DEVCLKEN1, 20, 0),
-			OWL_DIVIDER_HW(CMU_UART1CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
+			OWL_DIVIDER_HW(CMU_UART4CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
 			CLK_IGNORE_UNUSED);
 
 static OWL_COMP_DIV(uart5_clk, "uart5_clk", uart_clk_mux_p,
 			OWL_MUX_HW(CMU_UART5CLK, 16, 1),
 			OWL_GATE_HW(CMU_DEVCLKEN1, 21, 0),
-			OWL_DIVIDER_HW(CMU_UART1CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
+			OWL_DIVIDER_HW(CMU_UART5CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
 			CLK_IGNORE_UNUSED);
 
 static OWL_COMP_DIV(uart6_clk, "uart6_clk", uart_clk_mux_p,
 			OWL_MUX_HW(CMU_UART6CLK, 16, 1),
 			OWL_GATE_HW(CMU_DEVCLKEN1, 18, 0),
-			OWL_DIVIDER_HW(CMU_UART1CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
+			OWL_DIVIDER_HW(CMU_UART6CLK, 0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL),
 			CLK_IGNORE_UNUSED);
 
 static OWL_COMP_DIV(i2srx_clk, "i2srx_clk", i2s_clk_mux_p,
Signature · 1 line
2.30.2
author maintainer
#245 lore raw

PATCH 245/348 clk: actions: Fix SD clocks factor table on Owl S500 SoC

In reply to Greg Kroah-Hartman

From: Cristian Ciocaltea <[email protected]>

[ Upstream commit fe1f71e338d77814da3ef44e9f64d32981a6ccdf ]

Drop the unsupported entries in the factor table used for the SD[0-2] clocks definitions on the Actions Semi Owl S500 SoC.

---
 drivers/clk/actions/owl-s500.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/clk/actions/owl-s500.c +2 -4
index 6eeb7e290f40..d2396b2396ff 100644
@@ -125,8 +125,7 @@ static struct clk_factor_table sd_factor_table[] = {
 	{ 12, 1, 13 }, { 13, 1, 14 }, { 14, 1, 15 }, { 15, 1, 16 },
 	{ 16, 1, 17 }, { 17, 1, 18 }, { 18, 1, 19 }, { 19, 1, 20 },
 	{ 20, 1, 21 }, { 21, 1, 22 }, { 22, 1, 23 }, { 23, 1, 24 },
-	{ 24, 1, 25 }, { 25, 1, 26 }, { 26, 1, 27 }, { 27, 1, 28 },
-	{ 28, 1, 29 }, { 29, 1, 30 }, { 30, 1, 31 }, { 31, 1, 32 },
+	{ 24, 1, 25 },
 
 	/* bit8: /128 */
 	{ 256, 1, 1 * 128 }, { 257, 1, 2 * 128 }, { 258, 1, 3 * 128 }, { 259, 1, 4 * 128 },
@@ -135,8 +134,7 @@ static struct clk_factor_table sd_factor_table[] = {
 	{ 268, 1, 13 * 128 }, { 269, 1, 14 * 128 }, { 270, 1, 15 * 128 }, { 271, 1, 16 * 128 },
 	{ 272, 1, 17 * 128 }, { 273, 1, 18 * 128 }, { 274, 1, 19 * 128 }, { 275, 1, 20 * 128 },
 	{ 276, 1, 21 * 128 }, { 277, 1, 22 * 128 }, { 278, 1, 23 * 128 }, { 279, 1, 24 * 128 },
-	{ 280, 1, 25 * 128 }, { 281, 1, 26 * 128 }, { 282, 1, 27 * 128 }, { 283, 1, 28 * 128 },
-	{ 284, 1, 29 * 128 }, { 285, 1, 30 * 128 }, { 286, 1, 31 * 128 }, { 287, 1, 32 * 128 },
+	{ 280, 1, 25 * 128 },
 	{ 0, 0, 0 },
 };
 
Signature · 1 line
2.30.2
author maintainer
#246 lore raw

PATCH 246/348 clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC

In reply to Greg Kroah-Hartman

From: Cristian Ciocaltea <[email protected]>

[ Upstream commit a8f1f03caa51aa7a69c671aa87c475034db7d368 ]

The following clocks of the Actions Semi Owl S500 SoC have been defined to use a shared clock factor table 'bisp_factor_table[]': DE[1-2], VCE, VDE, BISP, SENSOR[0-1]

There are several issues involved in this approach:

* 'bisp_factor_table[]' describes the configuration of a regular 8-rates divider, so its usage is redundant. Additionally, judging by the BISP clock context, it is incomplete since it maps only 8 out of 12 possible entries.

* The clocks mentioned above are not identical in terms of the available rates, therefore cannot rely on the same factor table. Specifically, BISP and SENSOR* are standard 12-rate dividers so their configuration should rely on a proper clock div table, while VCE and VDE require a factor table that is a actually a subset of the one needed for DE[1-2] clocks.

Let's fix this by implementing the following:

* Add new factor tables 'de_factor_table' and 'hde_factor_table' to properly handle DE[1-2], VCE and VDE clocks.

* Add a common div table 'std12rate_div_table' for BISP and SENSOR[0-1] clocks converted to OWL_COMP_DIV.

* Drop the now unused 'bisp_factor_table[]'.

Additionally, drop the CLK_IGNORE_UNUSED flag for SENSOR[0-1] since there is no reason to always keep ON those clocks.

---
 drivers/clk/actions/owl-s500.c | 44 ++++++++++++++++++++++------------
 1 file changed, 29 insertions(+), 15 deletions(-)
drivers/clk/actions/owl-s500.c +29 -15
index d2396b2396ff..0528536ed9eb 100644
@@ -138,9 +138,16 @@ static struct clk_factor_table sd_factor_table[] = {
 	{ 0, 0, 0 },
 };
 
-static struct clk_factor_table bisp_factor_table[] = {
-	{ 0, 1, 1 }, { 1, 1, 2 }, { 2, 1, 3 }, { 3, 1, 4 },
-	{ 4, 1, 5 }, { 5, 1, 6 }, { 6, 1, 7 }, { 7, 1, 8 },
+static struct clk_factor_table de_factor_table[] = {
+	{ 0, 1, 1 }, { 1, 2, 3 }, { 2, 1, 2 }, { 3, 2, 5 },
+	{ 4, 1, 3 }, { 5, 1, 4 }, { 6, 1, 6 }, { 7, 1, 8 },
+	{ 8, 1, 12 },
+	{ 0, 0, 0 },
+};
+
+static struct clk_factor_table hde_factor_table[] = {
+	{ 0, 1, 1 }, { 1, 2, 3 }, { 2, 1, 2 }, { 3, 2, 5 },
+	{ 4, 1, 3 }, { 5, 1, 4 }, { 6, 1, 6 }, { 7, 1, 8 },
 	{ 0, 0, 0 },
 };
 
@@ -154,6 +161,13 @@ static struct clk_div_table rmii_ref_div_table[] = {
 	{ 0, 0 },
 };
 
+static struct clk_div_table std12rate_div_table[] = {
+	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+	{ 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+	{ 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+	{ 0, 0 },
+};
+
 static struct clk_div_table i2s_div_table[] = {
 	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
 	{ 4, 6 }, { 5, 8 }, { 6, 12 }, { 7, 16 },
@@ -186,39 +200,39 @@ static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNE
 
 /* factor clocks */
 static OWL_FACTOR(ahb_clk, "ahb_clk", "h_clk", CMU_BUSCLK1, 2, 2, ahb_factor_table, 0, 0);
-static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 3, bisp_factor_table, 0, 0);
-static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 3, bisp_factor_table, 0, 0);
+static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 4, de_factor_table, 0, 0);
+static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 4, de_factor_table, 0, 0);
 
 /* composite clocks */
 static OWL_COMP_FACTOR(vce_clk, "vce_clk", hde_clk_mux_p,
 			OWL_MUX_HW(CMU_VCECLK, 4, 2),
 			OWL_GATE_HW(CMU_DEVCLKEN0, 26, 0),
-			OWL_FACTOR_HW(CMU_VCECLK, 0, 3, 0, bisp_factor_table),
+			OWL_FACTOR_HW(CMU_VCECLK, 0, 3, 0, hde_factor_table),
 			0);
 
 static OWL_COMP_FACTOR(vde_clk, "vde_clk", hde_clk_mux_p,
 			OWL_MUX_HW(CMU_VDECLK, 4, 2),
 			OWL_GATE_HW(CMU_DEVCLKEN0, 25, 0),
-			OWL_FACTOR_HW(CMU_VDECLK, 0, 3, 0, bisp_factor_table),
+			OWL_FACTOR_HW(CMU_VDECLK, 0, 3, 0, hde_factor_table),
 			0);
 
-static OWL_COMP_FACTOR(bisp_clk, "bisp_clk", bisp_clk_mux_p,
+static OWL_COMP_DIV(bisp_clk, "bisp_clk", bisp_clk_mux_p,
 			OWL_MUX_HW(CMU_BISPCLK, 4, 1),
 			OWL_GATE_HW(CMU_DEVCLKEN0, 14, 0),
-			OWL_FACTOR_HW(CMU_BISPCLK, 0, 3, 0, bisp_factor_table),
+			OWL_DIVIDER_HW(CMU_BISPCLK, 0, 4, 0, std12rate_div_table),
 			0);
 
-static OWL_COMP_FACTOR(sensor0_clk, "sensor0_clk", sensor_clk_mux_p,
+static OWL_COMP_DIV(sensor0_clk, "sensor0_clk", sensor_clk_mux_p,
 			OWL_MUX_HW(CMU_SENSORCLK, 4, 1),
 			OWL_GATE_HW(CMU_DEVCLKEN0, 14, 0),
-			OWL_FACTOR_HW(CMU_SENSORCLK, 0, 3, 0, bisp_factor_table),
-			CLK_IGNORE_UNUSED);
+			OWL_DIVIDER_HW(CMU_SENSORCLK, 0, 4, 0, std12rate_div_table),
+			0);
 
-static OWL_COMP_FACTOR(sensor1_clk, "sensor1_clk", sensor_clk_mux_p,
+static OWL_COMP_DIV(sensor1_clk, "sensor1_clk", sensor_clk_mux_p,
 			OWL_MUX_HW(CMU_SENSORCLK, 4, 1),
 			OWL_GATE_HW(CMU_DEVCLKEN0, 14, 0),
-			OWL_FACTOR_HW(CMU_SENSORCLK, 8, 3, 0, bisp_factor_table),
-			CLK_IGNORE_UNUSED);
+			OWL_DIVIDER_HW(CMU_SENSORCLK, 8, 4, 0, std12rate_div_table),
+			0);
 
 static OWL_COMP_FACTOR(sd0_clk, "sd0_clk", sd_clk_mux_p,
 			OWL_MUX_HW(CMU_SD0CLK, 9, 1),
Signature · 1 line
2.30.2
author maintainer
#247 lore raw

PATCH 247/348 clk: si5341: Avoid divide errors due to bogus register contents

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

[ Upstream commit 78f6f406026d688868223d5dbeb197a4f7e9a9fd ]

If the Si5341 is being initially programmed and has no stored NVM configuration, some of the register contents may contain unexpected values, such as zeros, which could cause divide by zero errors during driver initialization. Trap errors caused by zero registers or zero clock rates which could result in divide errors later in the code.

---
 drivers/clk/clk-si5341.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/clk/clk-si5341.c +13 -2
index 6e780c2a9e6b..ae8960188826 100644
@@ -482,6 +482,9 @@ static unsigned long si5341_synth_clk_recalc_rate(struct clk_hw *hw,
 			SI5341_SYNTH_N_NUM(synth->index), &n_num, &n_den);
 	if (err < 0)
 		return err;
+	/* Check for bogus/uninitialized settings */
+	if (!n_num || !n_den)
+		return 0;
 
 	/*
 	 * n_num and n_den are shifted left as much as possible, so to prevent
@@ -665,6 +668,9 @@ static long si5341_output_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 {
 	unsigned long r;
 
+	if (!rate)
+		return 0;
+
 	r = *parent_rate >> 1;
 
 	/* If rate is an even divisor, no changes to parent required */
@@ -693,11 +699,16 @@ static int si5341_output_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 		unsigned long parent_rate)
 {
 	struct clk_si5341_output *output = to_clk_si5341_output(hw);
-	/* Frequency divider is (r_div + 1) * 2 */
-	u32 r_div = (parent_rate / rate) >> 1;
+	u32 r_div;
 	int err;
 	u8 r[3];
 
+	if (!rate)
+		return -EINVAL;
+
+	/* Frequency divider is (r_div + 1) * 2 */
+	r_div = (parent_rate / rate) >> 1;
+
 	if (r_div <= 1)
 		r_div = 0;
 	else if (r_div >= BIT(24))
Signature · 1 line
2.30.2
author maintainer
#248 lore raw

PATCH 248/348 clk: si5341: Update initialization magic

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

[ Upstream commit 3c9b49b0031aefb81adfdba5ab0ddf3ca3a2cdc9 ]

Update the default register settings to include the VCO_RESET_CALCODE settings (set by the SiLabs ClockBuilder software but not described in the datasheet). Also update part of the initialization sequence to match ClockBuilder and the datasheet.

---
 drivers/clk/clk-si5341.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/clk/clk-si5341.c +3 -1
index ae8960188826..8f9f3d4a54fd 100644
@@ -304,6 +304,8 @@ static const struct si5341_reg_default si5341_reg_defaults[] = {
 	{ 0x094A, 0x00 }, /* INx_TO_PFD_EN (disabled) */
 	{ 0x0A02, 0x00 }, /* Not in datasheet */
 	{ 0x0B44, 0x0F }, /* PDIV_ENB (datasheet does not mention what it is) */
+	{ 0x0B57, 0x10 }, /* VCO_RESET_CALCODE (not described in datasheet) */
+	{ 0x0B58, 0x05 }, /* VCO_RESET_CALCODE (not described in datasheet) */
 };
 
 /* Read and interpret a 44-bit followed by a 32-bit value in the regmap */
@@ -935,7 +937,7 @@ static const struct si5341_reg_default si5341_preamble[] = {
 	{ 0x0B25, 0x00 },
 	{ 0x0502, 0x01 },
 	{ 0x0505, 0x03 },
-	{ 0x0957, 0x1F },
+	{ 0x0957, 0x17 },
 	{ 0x0B4E, 0x1A },
 };
 
Signature · 1 line
2.30.2
author maintainer
#249 lore raw

PATCH 249/348 writeback: fix obtain a reference to a freeing memcg css

In reply to Greg Kroah-Hartman

From: Muchun Song <[email protected]>

[ Upstream commit 8b0ed8443ae6458786580d36b7d5f8125535c5d4 ]

The caller of wb_get_create() should pin the memcg, because wb_get_create() relies on this guarantee. The rcu read lock only can guarantee that the memcg css returned by css_from_id() cannot be released, but the reference of the memcg can be zero.

rcu_read_lock()
memcg_css = css_from_id()
wb_get_create(memcg_css)

      cgwb_create(memcg_css)
          // css_get can change the ref counter from 0 back to 1
          css_get(memcg_css)

rcu_read_unlock()

Fix it by holding a reference to the css before calling wb_get_create(). This is not a problem I encountered in the real world. Just the result of a code review.

Fixes 682aa8e1a6a1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates")
---
 fs/fs-writeback.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
fs/fs-writeback.c +7 -2
index 3a0d7b8af141..22e9c88f3960 100644
@@ -510,9 +510,14 @@ static void inode_switch_wbs(struct inode *inode, int new_wb_id)
 	/* find and pin the new wb */
 	rcu_read_lock();
 	memcg_css = css_from_id(new_wb_id, &memory_cgrp_subsys);
-	if (memcg_css)
-		isw->new_wb = wb_get_create(bdi, memcg_css, GFP_ATOMIC);
+	if (memcg_css && !css_tryget(memcg_css))
+		memcg_css = NULL;
 	rcu_read_unlock();
+	if (!memcg_css)
+		goto out_free;
+
+	isw->new_wb = wb_get_create(bdi, memcg_css, GFP_ATOMIC);
+	css_put(memcg_css);
 	if (!isw->new_wb)
 		goto out_free;
 
Signature · 1 line
2.30.2
author maintainer
#250 lore raw

PATCH 250/348 net: lwtunnel: handle MTU calculation in forwading

In reply to Greg Kroah-Hartman

From: Vadim Fedorenko <[email protected]>

[ Upstream commit fade56410c22cacafb1be9f911a0afd3701d8366 ]

Commit 14972cbd34ff ("net: lwtunnel: Handle fragmentation") moved fragmentation logic away from lwtunnel by carry encap headroom and use it in output MTU calculation. But the forwarding part was not covered and created difference in MTU for output and forwarding and further to silent drops on ipv4 forwarding path. Fix it by taking into account lwtunnel encap headroom.

The same commit also introduced difference in how to treat RTAX_MTU in IPv4 and IPv6 where latter explicitly removes lwtunnel encap headroom from route MTU. Make IPv4 version do the same.

Fixes 14972cbd34ff ("net: lwtunnel: Handle fragmentation")
---
 include/net/ip.h        | 12 ++++++++----
 include/net/ip6_route.h | 16 ++++++++++++----
 net/ipv4/route.c        |  3 ++-
 3 files changed, 22 insertions(+), 9 deletions(-)
include/net/ip.h +8 -4
index 0278d63c1527..52abfc00b5e3 100644
@@ -30,6 +30,7 @@
 #include <net/flow.h>
 #include <net/flow_dissector.h>
 #include <net/netns/hash.h>
+#include <net/lwtunnel.h>
 
 #define IPV4_MAX_PMTU		65535U		/* RFC 2675, Section 5.1 */
 #define IPV4_MIN_MTU		68			/* RFC 791 */
@@ -448,22 +449,25 @@ static inline unsigned int ip_dst_mtu_maybe_forward(const struct dst_entry *dst,
 
 	/* 'forwarding = true' case should always honour route mtu */
 	mtu = dst_metric_raw(dst, RTAX_MTU);
-	if (mtu)
-		return mtu;
+	if (!mtu)
+		mtu = min(READ_ONCE(dst->dev->mtu), IP_MAX_MTU);
 
-	return min(READ_ONCE(dst->dev->mtu), IP_MAX_MTU);
+	return mtu - lwtunnel_headroom(dst->lwtstate, mtu);
 }
 
 static inline unsigned int ip_skb_dst_mtu(struct sock *sk,
 					  const struct sk_buff *skb)
 {
+	unsigned int mtu;
+
 	if (!sk || !sk_fullsock(sk) || ip_sk_use_pmtu(sk)) {
 		bool forwarding = IPCB(skb)->flags & IPSKB_FORWARDED;
 
 		return ip_dst_mtu_maybe_forward(skb_dst(skb), forwarding);
 	}
 
-	return min(READ_ONCE(skb_dst(skb)->dev->mtu), IP_MAX_MTU);
+	mtu = min(READ_ONCE(skb_dst(skb)->dev->mtu), IP_MAX_MTU);
+	return mtu - lwtunnel_headroom(skb_dst(skb)->lwtstate, mtu);
 }
 
 struct dst_metrics *ip_fib_metrics_init(struct net *net, struct nlattr *fc_mx,
include/net/ip6_route.h +12 -4
index 2d0d91070268..40602def3fe7 100644
@@ -263,11 +263,18 @@ int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
 
 static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
 {
+	int mtu;
+
 	struct ipv6_pinfo *np = skb->sk && !dev_recursion_level() ?
 				inet6_sk(skb->sk) : NULL;
 
-	return (np && np->pmtudisc >= IPV6_PMTUDISC_PROBE) ?
-	       skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
+	if (np && np->pmtudisc >= IPV6_PMTUDISC_PROBE) {
+		mtu = READ_ONCE(skb_dst(skb)->dev->mtu);
+		mtu -= lwtunnel_headroom(skb_dst(skb)->lwtstate, mtu);
+	} else
+		mtu = dst_mtu(skb_dst(skb));
+
+	return mtu;
 }
 
 static inline bool ip6_sk_accept_pmtu(const struct sock *sk)
@@ -315,7 +322,7 @@ static inline unsigned int ip6_dst_mtu_forward(const struct dst_entry *dst)
 	if (dst_metric_locked(dst, RTAX_MTU)) {
 		mtu = dst_metric_raw(dst, RTAX_MTU);
 		if (mtu)
-			return mtu;
+			goto out;
 	}
 
 	mtu = IPV6_MIN_MTU;
@@ -325,7 +332,8 @@ static inline unsigned int ip6_dst_mtu_forward(const struct dst_entry *dst)
 		mtu = idev->cnf.mtu6;
 	rcu_read_unlock();
 
-	return mtu;
+out:
+	return mtu - lwtunnel_headroom(dst->lwtstate, mtu);
 }
 
 u32 ip6_mtu_from_fib6(const struct fib6_result *res,
net/ipv4/route.c +2 -1
index 3ff702380b62..0e976848d4bb 100644
@@ -1321,7 +1321,7 @@ static unsigned int ipv4_mtu(const struct dst_entry *dst)
 		mtu = dst_metric_raw(dst, RTAX_MTU);
 
 	if (mtu)
-		return mtu;
+		goto out;
 
 	mtu = READ_ONCE(dst->dev->mtu);
 
@@ -1330,6 +1330,7 @@ static unsigned int ipv4_mtu(const struct dst_entry *dst)
 			mtu = 576;
 	}
 
+out:
 	mtu = min_t(unsigned int, mtu, IP_MAX_MTU);
 
 	return mtu - lwtunnel_headroom(dst->lwtstate, mtu);
Signature · 1 line
2.30.2
author maintainer
#251 lore raw

PATCH 251/348 net: sched: fix warning in tcindex_alloc_perfect_hash

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit 3f2db250099f46988088800052cdf2332c7aba61 ]

Syzbot reported warning in tcindex_alloc_perfect_hash. The problem was in too big cp->hash, which triggers warning in kmalloc. Since cp->hash comes from userspace, there is no need to warn if value is not correct

Fixes b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()")
Reported-and-tested-by [email protected]
---
 net/sched/cls_tcindex.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/sched/cls_tcindex.c +1 -1
index c9399e81c505..3e81f87d0c89 100644
@@ -304,7 +304,7 @@ static int tcindex_alloc_perfect_hash(struct net *net, struct tcindex_data *cp)
 	int i, err = 0;
 
 	cp->perfect = kcalloc(cp->hash, sizeof(struct tcindex_filter_result),
-			      GFP_KERNEL);
+			      GFP_KERNEL | __GFP_NOWARN);
 	if (!cp->perfect)
 		return -ENOMEM;
 
Signature · 1 line
2.30.2
author maintainer
#252 lore raw

PATCH 252/348 RDMA/mlx5: Dont access NULL-cleared mpi pointer

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

[ Upstream commit 4a754d7637026b42b0c9ba5787ad5ee3bc2ff77f ]

The "dev->port[i].mp.mpi" is set to NULL during mlx5_ib_unbind_slave_port() execution, however that field is needed to add device to unaffiliated list.

Such flow causes to the following kernel panic while unloading mlx5_ib module in multi-port mode, hence the device should be added to the list prior to unbind call.

RPC: Unregistered rdma transport module.
RPC: Unregistered rdma backchannel transport module.

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD 0 P4D 0
 Oops: 0002 [#1] SMP NOPTI
 CPU: 4 PID: 1904 Comm: modprobe Not tainted 5.13.0-rc7_for_upstream_min_debug_2021_06_24_12_08 #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:mlx5_ib_cleanup_multiport_master+0x18b/0x2d0 [mlx5_ib]
 Code: 00 04 0f 85 c4 00 00 00 48 89 df e8 ef fa ff ff 48 8b 83 40 0d 00 00 48 8b 15 b9 e8 05 00 4a 8b 44 28 20 48 89 05 ad e8 05 00 <48> c7 00 d0 57 c5 a0 48 89 50 08 48 89 02 39 ab 88 0a 00 00 0f 86
 RSP: 0018:ffff888116ee3df8 EFLAGS: 00010296
 RAX: 0000000000000000 RBX: ffff8881154f6000 RCX: 0000000000000080
 RDX: ffffffffa0c557d0 RSI: ffff88810b69d200 RDI: 000000000002d8a0
 RBP: 0000000000000002 R08: ffff888110780408 R09: 0000000000000000
 R10: ffff88812452e1c0 R11: fffffffffff7e028 R12: 0000000000000000
 R13: 0000000000000080 R14: ffff888102c58000 R15: 0000000000000000
 FS:  00007f884393a740(0000) GS:ffff8882f5a00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000001249f6004 CR4: 0000000000370ea0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  mlx5_ib_stage_init_cleanup+0x16/0xd0 [mlx5_ib]
  __mlx5_ib_remove+0x33/0x90 [mlx5_ib]
  mlx5r_remove+0x22/0x30 [mlx5_ib]
  auxiliary_bus_remove+0x18/0x30
  __device_release_driver+0x177/0x220
  driver_detach+0xc4/0x100
  bus_remove_driver+0x58/0xd0
  auxiliary_driver_unregister+0x12/0x20
  mlx5_ib_cleanup+0x13/0x897 [mlx5_ib]
  __x64_sys_delete_module+0x154/0x230
  ? exit_to_user_mode_prepare+0x104/0x140
  do_syscall_64+0x3f/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f8842e095c7
 Code: 73 01 c3 48 8b 0d d9 48 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a9 48 2c 00 f7 d8 64 89 01 48
 RSP: 002b:00007ffc68f6e758 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
 RAX: ffffffffffffffda RBX: 00005638207929c0 RCX: 00007f8842e095c7
 RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000563820792a28
 RBP: 00005638207929c0 R08: 00007ffc68f6d701 R09: 0000000000000000
 R10: 00007f8842e82880 R11: 0000000000000206 R12: 0000563820792a28
 R13: 0000000000000001 R14: 0000563820792a28 R15: 00007ffc68f6fb40
 Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_ipoib ib_cm ib_umad mlx5_ib(-) mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core mlx5_core ptp pps_core [last unloaded: rpcrdma]
 CR2: 0000000000000000
 ---[ end trace a0bb7e20804e9e9b ]---
---
 drivers/infiniband/hw/mlx5/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/mlx5/main.c +1 -1
index be624e613719..9025086a8932 100644
@@ -6023,9 +6023,9 @@ static void mlx5_ib_cleanup_multiport_master(struct mlx5_ib_dev *dev)
 				dev->port[i].mp.mpi = NULL;
 			} else {
 				mlx5_ib_dbg(dev, "unbinding port_num: %d\n", i + 1);
-				mlx5_ib_unbind_slave_port(dev, dev->port[i].mp.mpi);
 				list_add_tail(&dev->port[i].mp.mpi->list,
 					      &mlx5_ib_unaffiliated_port_list);
+				mlx5_ib_unbind_slave_port(dev, dev->port[i].mp.mpi);
 			}
 		}
 	}
Signature · 1 line
2.30.2
author maintainer
#253 lore raw

PATCH 253/348 MIPS: Fix PKMAP with 32-bit MIPS huge page support

In reply to Greg Kroah-Hartman

From: Wei Li <[email protected]>

[ Upstream commit cf02ce742f09188272bcc8b0e62d789eb671fc4c ]

When 32-bit MIPS huge page support is enabled, we halve the number of pointers a PTE page holds, making its last half go to waste. Correspondingly, we should halve the number of kmap entries, as we just initialized only a single pte table for that in pagetable_init().

Fixes 35476311e529 ("MIPS: Add partial 32-bit huge page support")
---
 arch/mips/include/asm/highmem.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/include/asm/highmem.h +1 -1
index 9d84aafc33d0..9a6bf4f011b5 100644
@@ -36,7 +36,7 @@ extern pte_t *pkmap_page_table;
  * easily, subsequent pte tables have to be allocated in one physical
  * chunk of RAM.
  */
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) || defined(CONFIG_MIPS_HUGE_TLB_SUPPORT)
 #define LAST_PKMAP 512
 #else
 #define LAST_PKMAP 1024
Signature · 1 line
2.30.2
author maintainer
#254 lore raw

PATCH 254/348 staging: fbtft: Rectify GPIO handling

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit ec03c2104365ead0a33627c05e685093eed3eaef ]

The infamous commit c440eee1a7a1 ("Staging: staging: fbtft: Switch to the GPIO descriptor interface") broke GPIO handling completely. It has already four commits to rectify and it seems not enough. In order to fix the mess here we:

1) Set default to "inactive" for all requested pins

2) Fix CS#, RD#, and WR# pins polarity since it's active low and GPIO descriptor interface takes it into consideration from the Device Tree or ACPI

3) Consolidate chip activation (CS# assertion) under default

     ->reset() callback

To summarize the expectations about polarity for GPIOs:

RD# Low
WR# Low
CS# Low
RESET# Low
DC or RS High
RW High
Data 0 .. 15 High

See also Adafruit learning course [1] for the example of the schematics.

While at it, drop unneeded NULL checks, since GPIO API is tolerant to that.

[1]: https://learn.adafruit.com/adafruit-2-8-and-3-2-color-tft-touchscreen-breakout-v2/downloads

Fixes 92e3e884887c ("Staging: fbtft: Fix GPIO handling")
Fixes b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor")
Fixes dbc4f989c878 ("Staging: fbtft: Fix probing of gpio descriptor")
Fixes c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface")
Cc Jan Sebastian Götte <[email protected]>
Cc Nishad Kamdar <[email protected]>
---
 drivers/staging/fbtft/fb_agm1264k-fl.c | 20 ++++++++++----------
 drivers/staging/fbtft/fb_bd663474.c    |  4 ----
 drivers/staging/fbtft/fb_ili9163.c     |  4 ----
 drivers/staging/fbtft/fb_ili9320.c     |  1 -
 drivers/staging/fbtft/fb_ili9325.c     |  4 ----
 drivers/staging/fbtft/fb_ili9340.c     |  1 -
 drivers/staging/fbtft/fb_s6d1121.c     |  4 ----
 drivers/staging/fbtft/fb_sh1106.c      |  1 -
 drivers/staging/fbtft/fb_ssd1289.c     |  4 ----
 drivers/staging/fbtft/fb_ssd1325.c     |  2 --
 drivers/staging/fbtft/fb_ssd1331.c     |  6 ++----
 drivers/staging/fbtft/fb_ssd1351.c     |  1 -
 drivers/staging/fbtft/fb_upd161704.c   |  4 ----
 drivers/staging/fbtft/fb_watterott.c   |  1 -
 drivers/staging/fbtft/fbtft-bus.c      |  3 +--
 drivers/staging/fbtft/fbtft-core.c     | 13 ++++++-------
 drivers/staging/fbtft/fbtft-io.c       | 12 ++++++------
 17 files changed, 25 insertions(+), 60 deletions(-)
drivers/staging/fbtft/fb_agm1264k-fl.c +10 -10
index eeeeec97ad27..b545c2ca80a4 100644
@@ -84,9 +84,9 @@ static void reset(struct fbtft_par *par)
 
 	dev_dbg(par->info->device, "%s()\n", __func__);
 
-	gpiod_set_value(par->gpio.reset, 0);
-	udelay(20);
 	gpiod_set_value(par->gpio.reset, 1);
+	udelay(20);
+	gpiod_set_value(par->gpio.reset, 0);
 	mdelay(120);
 }
 
@@ -194,12 +194,12 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 	/* select chip */
 	if (*buf) {
 		/* cs1 */
-		gpiod_set_value(par->CS0, 1);
-		gpiod_set_value(par->CS1, 0);
-	} else {
-		/* cs0 */
 		gpiod_set_value(par->CS0, 0);
 		gpiod_set_value(par->CS1, 1);
+	} else {
+		/* cs0 */
+		gpiod_set_value(par->CS0, 1);
+		gpiod_set_value(par->CS1, 0);
 	}
 
 	gpiod_set_value(par->RS, 0); /* RS->0 (command mode) */
@@ -397,8 +397,8 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 	}
 	kfree(convert_buf);
 
-	gpiod_set_value(par->CS0, 1);
-	gpiod_set_value(par->CS1, 1);
+	gpiod_set_value(par->CS0, 0);
+	gpiod_set_value(par->CS1, 0);
 
 	return ret;
 }
@@ -419,10 +419,10 @@ static int write(struct fbtft_par *par, void *buf, size_t len)
 		for (i = 0; i < 8; ++i)
 			gpiod_set_value(par->gpio.db[i], data & (1 << i));
 		/* set E */
-		gpiod_set_value(par->EPIN, 1);
+		gpiod_set_value(par->EPIN, 0);
 		udelay(5);
 		/* unset E - write */
-		gpiod_set_value(par->EPIN, 0);
+		gpiod_set_value(par->EPIN, 1);
 		udelay(1);
 	}
 
drivers/staging/fbtft/fb_bd663474.c +0 -4
index e2c7646588f8..1629c2c440a9 100644
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -24,9 +23,6 @@
 
 static int init_display(struct fbtft_par *par)
 {
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	par->fbtftops.reset(par);
 
 	/* Initialization sequence from Lib_UTFT */
drivers/staging/fbtft/fb_ili9163.c +0 -4
index 05648c3ffe47..6582a2c90aaf 100644
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <video/mipi_display.h>
 
@@ -77,9 +76,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	write_reg(par, MIPI_DCS_SOFT_RESET); /* software reset */
 	mdelay(500);
 	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); /* exit sleep */
drivers/staging/fbtft/fb_ili9320.c +0 -1
index f2e72d14431d..a8f4c618b754 100644
@@ -8,7 +8,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/spi/spi.h>
 #include <linux/delay.h>
 
drivers/staging/fbtft/fb_ili9325.c +0 -4
index c9aa4cb43123..16d3b17ca279 100644
@@ -10,7 +10,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -85,9 +84,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	bt &= 0x07;
 	vc &= 0x07;
 	vrh &= 0x0f;
drivers/staging/fbtft/fb_ili9340.c +0 -1
index 415183c7054a..704236bcaf3f 100644
@@ -8,7 +8,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <video/mipi_display.h>
 
drivers/staging/fbtft/fb_s6d1121.c +0 -4
index 8c7de3290343..62f27172f844 100644
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -29,9 +28,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	/* Initialization sequence from Lib_UTFT */
 
 	write_reg(par, 0x0011, 0x2004);
drivers/staging/fbtft/fb_sh1106.c +0 -1
index 6f7249493ea3..7b9ab39e1c1a 100644
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
drivers/staging/fbtft/fb_ssd1289.c +0 -4
index 7a3fe022cc69..f27bab38b3ec 100644
@@ -10,7 +10,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 
 #include "fbtft.h"
 
@@ -28,9 +27,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	write_reg(par, 0x00, 0x0001);
 	write_reg(par, 0x03, 0xA8A4);
 	write_reg(par, 0x0C, 0x0000);
drivers/staging/fbtft/fb_ssd1325.c +0 -2
index 8a3140d41d8b..796a2ac3e194 100644
@@ -35,8 +35,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	gpiod_set_value(par->gpio.cs, 0);
-
 	write_reg(par, 0xb3);
 	write_reg(par, 0xf0);
 	write_reg(par, 0xae);
drivers/staging/fbtft/fb_ssd1331.c +2 -4
index 37622c9462aa..ec5eced7f8cb 100644
@@ -81,8 +81,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 	va_start(args, len);
 
 	*buf = (u8)va_arg(args, unsigned int);
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, 0);
+	gpiod_set_value(par->gpio.dc, 0);
 	ret = par->fbtftops.write(par, par->buf, sizeof(u8));
 	if (ret < 0) {
 		va_end(args);
@@ -104,8 +103,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 			return;
 		}
 	}
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, 1);
+	gpiod_set_value(par->gpio.dc, 1);
 	va_end(args);
 }
 
drivers/staging/fbtft/fb_ssd1351.c +0 -1
index 900b28d826b2..cf263a58a148 100644
@@ -2,7 +2,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/spi/spi.h>
 #include <linux/delay.h>
 
drivers/staging/fbtft/fb_upd161704.c +0 -4
index c77832ae5e5b..c680160d6380 100644
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -26,9 +25,6 @@ static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	/* Initialization sequence from Lib_UTFT */
 
 	/* register reset */
drivers/staging/fbtft/fb_watterott.c +0 -1
index 27cc8eabcbe9..fc65ce876155 100644
@@ -8,7 +8,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
drivers/staging/fbtft/fbtft-bus.c +1 -2
index 63c65dd67b17..3d422bc11641 100644
@@ -135,8 +135,7 @@ int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len)
 	remain = len / 2;
 	vmem16 = (u16 *)(par->info->screen_buffer + offset);
 
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, 1);
+	gpiod_set_value(par->gpio.dc, 1);
 
 	/* non buffered write */
 	if (!par->txbuf.buf)
drivers/staging/fbtft/fbtft-core.c +6 -7
index 61f0286fb157..bc53d68bfcaa 100644
@@ -37,8 +37,7 @@ int fbtft_write_buf_dc(struct fbtft_par *par, void *buf, size_t len, int dc)
 {
 	int ret;
 
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, dc);
+	gpiod_set_value(par->gpio.dc, dc);
 
 	ret = par->fbtftops.write(par, buf, len);
 	if (ret < 0)
@@ -79,7 +78,7 @@ static int fbtft_request_one_gpio(struct fbtft_par *par,
 	int ret = 0;
 
 	*gpiop = devm_gpiod_get_index_optional(dev, name, index,
-					       GPIOD_OUT_HIGH);
+					       GPIOD_OUT_LOW);
 	if (IS_ERR(*gpiop)) {
 		ret = PTR_ERR(*gpiop);
 		dev_err(dev,
@@ -230,11 +229,15 @@ static void fbtft_reset(struct fbtft_par *par)
 {
 	if (!par->gpio.reset)
 		return;
+
 	fbtft_par_dbg(DEBUG_RESET, par, "%s()\n", __func__);
+
 	gpiod_set_value_cansleep(par->gpio.reset, 1);
 	usleep_range(20, 40);
 	gpiod_set_value_cansleep(par->gpio.reset, 0);
 	msleep(120);
+
+	gpiod_set_value_cansleep(par->gpio.cs, 1);  /* Activate chip */
 }
 
 static void fbtft_update_display(struct fbtft_par *par, unsigned int start_line,
@@ -921,8 +924,6 @@ static int fbtft_init_display_dt(struct fbtft_par *par)
 		return -EINVAL;
 
 	par->fbtftops.reset(par);
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
 
 	while (p) {
 		if (val & FBTFT_OF_INIT_CMD) {
@@ -1012,8 +1013,6 @@ int fbtft_init_display(struct fbtft_par *par)
 	}
 
 	par->fbtftops.reset(par);
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
 
 	i = 0;
 	while (i < FBTFT_MAX_INIT_SEQUENCE) {
drivers/staging/fbtft/fbtft-io.c +6 -6
index 0863d257d762..de1904a443c2 100644
@@ -142,12 +142,12 @@ int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
 		data = *(u8 *)buf;
 
 		/* Start writing by pulling down /WR */
-		gpiod_set_value(par->gpio.wr, 0);
+		gpiod_set_value(par->gpio.wr, 1);
 
 		/* Set data */
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		if (data == prev_data) {
-			gpiod_set_value(par->gpio.wr, 0); /* used as delay */
+			gpiod_set_value(par->gpio.wr, 1); /* used as delay */
 		} else {
 			for (i = 0; i < 8; i++) {
 				if ((data & 1) != (prev_data & 1))
@@ -165,7 +165,7 @@ int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
 #endif
 
 		/* Pullup /WR */
-		gpiod_set_value(par->gpio.wr, 1);
+		gpiod_set_value(par->gpio.wr, 0);
 
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		prev_data = *(u8 *)buf;
@@ -192,12 +192,12 @@ int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
 		data = *(u16 *)buf;
 
 		/* Start writing by pulling down /WR */
-		gpiod_set_value(par->gpio.wr, 0);
+		gpiod_set_value(par->gpio.wr, 1);
 
 		/* Set data */
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		if (data == prev_data) {
-			gpiod_set_value(par->gpio.wr, 0); /* used as delay */
+			gpiod_set_value(par->gpio.wr, 1); /* used as delay */
 		} else {
 			for (i = 0; i < 16; i++) {
 				if ((data & 1) != (prev_data & 1))
@@ -215,7 +215,7 @@ int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
 #endif
 
 		/* Pullup /WR */
-		gpiod_set_value(par->gpio.wr, 1);
+		gpiod_set_value(par->gpio.wr, 0);
 
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		prev_data = *(u16 *)buf;
Signature · 1 line
2.30.2
author maintainer
#255 lore raw

PATCH 255/348 rcu: Invoke rcu_spawn_core_kthreads() from rcu_spawn_gp_kthread()

In reply to Greg Kroah-Hartman

From: Paul E. McKenney <[email protected]>

[ Upstream commit 8e4b1d2bc198e34b48fc7cc3a3c5a2fcb269e271 ]

Currently, rcu_spawn_core_kthreads() is invoked via an early_initcall(), which works, except that rcu_spawn_gp_kthread() is also invoked via an early_initcall() and rcu_spawn_core_kthreads() relies on adjustments to kthread_prio that are carried out by rcu_spawn_gp_kthread(). There is no guaranttee of ordering among early_initcall() handlers, and thus no guarantee that kthread_prio will be properly checked and range-limited at the time that rcu_spawn_core_kthreads() needs it.

In most cases, this bug is harmless. After all, the only reason that rcu_spawn_gp_kthread() adjusts the value of kthread_prio is if the user specified a nonsensical value for this boot parameter, which experience indicates is rare.

Nevertheless, a bug is a bug. This commit therefore causes the rcu_spawn_core_kthreads() function to be invoked directly from rcu_spawn_gp_kthread() after any needed adjustments to kthread_prio have been carried out.

Fixes 48d07c04b4cc ("rcu: Enable elimination of Tree-RCU softirq processing")
---
 kernel/rcu/tree.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/rcu/tree.c +1 -1
index 4dfa9dd47223..fd37827eca5b 100644
@@ -2498,7 +2498,6 @@ static int __init rcu_spawn_core_kthreads(void)
 		  "%s: Could not start rcuc kthread, OOM is now expected behavior\n", __func__);
 	return 0;
 }
-early_initcall(rcu_spawn_core_kthreads);
 
 /*
  * Handle any core-RCU processing required by a call_rcu() invocation.
@@ -3315,6 +3314,7 @@ static int __init rcu_spawn_gp_kthread(void)
 	wake_up_process(t);
 	rcu_spawn_nocb_kthreads();
 	rcu_spawn_boost_kthreads();
+	rcu_spawn_core_kthreads();
 	return 0;
 }
 early_initcall(rcu_spawn_gp_kthread);
Signature · 1 line
2.30.2
author maintainer
#256 lore raw

PATCH 256/348 tty: nozomi: Fix a resource leak in an error handling function

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 31a9a318255960d32ae183e95d0999daf2418608 ]

A 'request_irq()' call is not balanced by a corresponding 'free_irq()' in the error handling path, as already done in the remove function.

Add it.

---
 drivers/tty/nozomi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/tty/nozomi.c +1 -0
index ed99948f3b7f..50590e50c3fe 100644
@@ -1437,6 +1437,7 @@ err_free_tty:
 		tty_unregister_device(ntty_driver, dc->index_start + i);
 		tty_port_destroy(&dc->port[i].port);
 	}
+	free_irq(pdev->irq, dc);
 err_free_kfifo:
 	for (i = 0; i < MAX_PORT; i++)
 		kfifo_free(&dc->port[i].fifo_ul);
Signature · 1 line
2.30.2
author maintainer
#257 lore raw

PATCH 257/348 mwifiex: re-fix for unaligned accesses

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 8f4e3d48bb50765ab27ae5bebed2595b20de80a1 ]

A patch from 2017 changed some accesses to DMA memory to use get_unaligned_le32() and similar interfaces, to avoid problems with doing unaligned accesson uncached memory.

However, the change in the mwifiex_pcie_alloc_sleep_cookie_buf() function ended up changing the size of the access instead, as it operates on a pointer to u8.

Change this function back to actually access the entire 32 bits. Note that the pointer is aligned by definition because it came from dma_alloc_coherent().

Fixes 92c70a958b0b ("mwifiex: fix for unaligned reads")
---
 drivers/net/wireless/marvell/mwifiex/pcie.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/net/wireless/marvell/mwifiex/pcie.c +4 -6
index 58c9623c3a91..bc46a0aa06eb 100644
@@ -1080,7 +1080,7 @@ static int mwifiex_pcie_delete_cmdrsp_buf(struct mwifiex_adapter *adapter)
 static int mwifiex_pcie_alloc_sleep_cookie_buf(struct mwifiex_adapter *adapter)
 {
 	struct pcie_service_card *card = adapter->card;
-	u32 tmp;
+	u32 *cookie;
 
 	card->sleep_cookie_vbase = pci_alloc_consistent(card->dev, sizeof(u32),
 						     &card->sleep_cookie_pbase);
@@ -1089,13 +1089,11 @@ static int mwifiex_pcie_alloc_sleep_cookie_buf(struct mwifiex_adapter *adapter)
 			    "pci_alloc_consistent failed!\n");
 		return -ENOMEM;
 	}
+	cookie = (u32 *)card->sleep_cookie_vbase;
 	/* Init val of Sleep Cookie */
-	tmp = FW_AWAKE_COOKIE;
-	put_unaligned(tmp, card->sleep_cookie_vbase);
+	*cookie = FW_AWAKE_COOKIE;
 
-	mwifiex_dbg(adapter, INFO,
-		    "alloc_scook: sleep cookie=0x%x\n",
-		    get_unaligned(card->sleep_cookie_vbase));
+	mwifiex_dbg(adapter, INFO, "alloc_scook: sleep cookie=0x%x\n", *cookie);
 
 	return 0;
 }
Signature · 1 line
2.30.2
author maintainer
#258 lore raw

PATCH 258/348 iio: adis_buffer: do not return ints in irq handlers

In reply to Greg Kroah-Hartman

From: Nuno Sa <[email protected]>

[ Upstream commit d877539ad8e8fdde9af69887055fec6402be1a13 ]

On an IRQ handler we should not return normal error codes as 'irqreturn_t' is expected.

Not necessarily stable material as the old check cannot fail, so it's a bug we can not hit.

---
 drivers/iio/imu/adis_buffer.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/iio/imu/adis_buffer.c +0 -3
index 4998a89d083d..8f8c1a87567b 100644
@@ -125,9 +125,6 @@ static irqreturn_t adis_trigger_handler(int irq, void *p)
 	struct adis *adis = iio_device_get_drvdata(indio_dev);
 	int ret;
 
-	if (!adis->buffer)
-		return -ENOMEM;
-
 	if (adis->data->has_paging) {
 		mutex_lock(&adis->txrx_lock);
 		if (adis->current_page != 0) {
Signature · 1 line
2.30.2
author maintainer
#259 lore raw

PATCH 259/348 iio: adis16400: do not return ints in irq handlers

In reply to Greg Kroah-Hartman

From: Nuno Sa <[email protected]>

[ Upstream commit ab3df79782e7d8a27a58576c9b4e8c6c4879ad79 ]

On an IRQ handler we should not return normal error codes as 'irqreturn_t' is expected.

Not necessary to apply to stable as the original check cannot fail and as such the bug cannot actually occur.

Fixes 5eda3550a3cc1 ("staging:iio:adis16400: Preallocate transfer message")
---
 drivers/iio/imu/adis16400.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/iio/imu/adis16400.c +0 -3
index 59e33302042c..afa9d26362da 100644
@@ -651,9 +651,6 @@ static irqreturn_t adis16400_trigger_handler(int irq, void *p)
 	void *buffer;
 	int ret;
 
-	if (!adis->buffer)
-		return -ENOMEM;
-
 	if (!(st->variant->flags & ADIS16400_NO_BURST) &&
 		st->adis.spi->max_speed_hz > ADIS16400_SPI_BURST) {
 		st->adis.spi->max_speed_hz = ADIS16400_SPI_BURST;
Signature · 1 line
2.30.2
author maintainer
#260 lore raw

PATCH 260/348 iio: accel: bma180: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit fc36da3131a747a9367a05caf06de19be1bcc972 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes b9a6a237ffc9 ("iio:bma180: Drop _update_scan_mode()")
Cc Peter Meerwald <[email protected]>
---
 drivers/iio/accel/bma180.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/iio/accel/bma180.c +7 -3
index 1574e4604a4f..aa301c606346 100644
@@ -119,7 +119,11 @@ struct bma180_data {
 	int scale;
 	int bw;
 	bool pmode;
-	u8 buff[16]; /* 3x 16-bit + 8-bit + padding + timestamp */
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		s16 chan[4];
+		s64 timestamp __aligned(8);
+	} scan;
 };
 
 enum bma180_chan {
@@ -675,12 +679,12 @@ static irqreturn_t bma180_trigger_handler(int irq, void *p)
 			mutex_unlock(&data->mutex);
 			goto err;
 		}
-		((s16 *)data->buff)[i++] = ret;
+		data->scan.chan[i++] = ret;
 	}
 
 	mutex_unlock(&data->mutex);
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buff, time_ns);
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, time_ns);
 err:
 	iio_trigger_notify_done(indio_dev->trig);
 
Signature · 1 line
2.30.2
author maintainer
#261 lore raw

PATCH 261/348 iio: accel: bma220: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 151dbf0078da98206817ee0b87d499035479ef11 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes 194dc4c71413 ("iio: accel: Add triggered buffer support for BMA220")
---
 drivers/iio/accel/bma220_spi.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/iio/accel/bma220_spi.c +7 -3
index cae905039cb6..71ee42b0266d 100644
@@ -73,7 +73,11 @@ static const int bma220_scale_table[][4] = {
 struct bma220_data {
 	struct spi_device *spi_device;
 	struct mutex lock;
-	s8 buffer[16]; /* 3x8-bit channels + 5x8 padding + 8x8 timestamp */
+	struct {
+		s8 chans[3];
+		/* Ensure timestamp is naturally aligned. */
+		s64 timestamp __aligned(8);
+	} scan;
 	u8 tx_buf[2] ____cacheline_aligned;
 };
 
@@ -104,12 +108,12 @@ static irqreturn_t bma220_trigger_handler(int irq, void *p)
 
 	mutex_lock(&data->lock);
 	data->tx_buf[0] = BMA220_REG_ACCEL_X | BMA220_READ_MASK;
-	ret = spi_write_then_read(spi, data->tx_buf, 1, data->buffer,
+	ret = spi_write_then_read(spi, data->tx_buf, 1, &data->scan.chans,
 				  ARRAY_SIZE(bma220_channels) - 1);
 	if (ret < 0)
 		goto err;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   pf->timestamp);
 err:
 	mutex_unlock(&data->lock);
Signature · 1 line
2.30.2
author maintainer
#262 lore raw

PATCH 262/348 iio: accel: hid: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit c6559bf796ccdb3a0c79db846af96c8f7046880b ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.
Note this matches what was done in all the other hid sensor drivers. This one was missed previously due to an extra level of indirection.

Found during an audit of all calls of this function.

Fixes a96cd0f901ee ("iio: accel: hid-sensor-accel-3d: Add timestamp")
Cc Srinivas Pandruvada <[email protected]>
---
 drivers/iio/accel/hid-sensor-accel-3d.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/iio/accel/hid-sensor-accel-3d.c +8 -5
index 0d9e2def2b25..f908476fa095 100644
@@ -29,8 +29,11 @@ struct accel_3d_state {
 	struct hid_sensor_hub_callbacks callbacks;
 	struct hid_sensor_common common_attributes;
 	struct hid_sensor_hub_attribute_info accel[ACCEL_3D_CHANNEL_MAX];
-	/* Reserve for 3 channels + padding + timestamp */
-	u32 accel_val[ACCEL_3D_CHANNEL_MAX + 3];
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		u32 accel_val[3];
+		s64 timestamp __aligned(8);
+	} scan;
 	int scale_pre_decml;
 	int scale_post_decml;
 	int scale_precision;
@@ -241,8 +244,8 @@ static int accel_3d_proc_event(struct hid_sensor_hub_device *hsdev,
 			accel_state->timestamp = iio_get_time_ns(indio_dev);
 
 		hid_sensor_push_data(indio_dev,
-				     accel_state->accel_val,
-				     sizeof(accel_state->accel_val),
+				     &accel_state->scan,
+				     sizeof(accel_state->scan),
 				     accel_state->timestamp);
 
 		accel_state->timestamp = 0;
@@ -267,7 +270,7 @@ static int accel_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
 	case HID_USAGE_SENSOR_ACCEL_Y_AXIS:
 	case HID_USAGE_SENSOR_ACCEL_Z_AXIS:
 		offset = usage_id - HID_USAGE_SENSOR_ACCEL_X_AXIS;
-		accel_state->accel_val[CHANNEL_SCAN_INDEX_X + offset] =
+		accel_state->scan.accel_val[CHANNEL_SCAN_INDEX_X + offset] =
 						*(u32 *)raw_data;
 		ret = 0;
 	break;
Signature · 1 line
2.30.2
author maintainer
#263 lore raw

PATCH 263/348 iio: accel: kxcjk-1013: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 3ab3aa2e7bd57497f9a7c6275c00dce237d2c9ba ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes 1a4fbf6a9286 ("iio: accel: kxcjk1013 3-axis accelerometer driver")
Cc Srinivas Pandruvada <[email protected]>
---
 drivers/iio/accel/kxcjk-1013.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)
drivers/iio/accel/kxcjk-1013.c +14 -10
index da9452e81105..57db60bf2d4c 100644
@@ -132,12 +132,23 @@ enum kx_acpi_type {
 	ACPI_KIOX010A,
 };
 
+enum kxcjk1013_axis {
+	AXIS_X,
+	AXIS_Y,
+	AXIS_Z,
+	AXIS_MAX
+};
+
 struct kxcjk1013_data {
 	struct i2c_client *client;
 	struct iio_trigger *dready_trig;
 	struct iio_trigger *motion_trig;
 	struct mutex mutex;
-	s16 buffer[8];
+	/* Ensure timestamp naturally aligned */
+	struct {
+		s16 chans[AXIS_MAX];
+		s64 timestamp __aligned(8);
+	} scan;
 	u8 odr_bits;
 	u8 range;
 	int wake_thres;
@@ -151,13 +162,6 @@ struct kxcjk1013_data {
 	enum kx_acpi_type acpi_type;
 };
 
-enum kxcjk1013_axis {
-	AXIS_X,
-	AXIS_Y,
-	AXIS_Z,
-	AXIS_MAX,
-};
-
 enum kxcjk1013_mode {
 	STANDBY,
 	OPERATION,
@@ -1078,12 +1082,12 @@ static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p)
 	ret = i2c_smbus_read_i2c_block_data_or_emulated(data->client,
 							KXCJK1013_REG_XOUT_L,
 							AXIS_MAX * 2,
-							(u8 *)data->buffer);
+							(u8 *)data->scan.chans);
 	mutex_unlock(&data->mutex);
 	if (ret < 0)
 		goto err;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   data->timestamp);
 err:
 	iio_trigger_notify_done(indio_dev->trig);
Signature · 1 line
2.30.2
author maintainer
#264 lore raw

PATCH 264/348 iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit b01401a228bc4997b0d4bcb669fced448f7a15ca ]

regmap_bulk_read takes a void * for its val parameter. It certainly makes no sense to cast to a (u8 *) + no need to explicitly cast at all when converting another pointer type to void *.

---
 drivers/iio/accel/mxc4005.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/accel/mxc4005.c +2 -2
index 3d5bea651923..9d07642c0de1 100644
@@ -135,7 +135,7 @@ static int mxc4005_read_xyz(struct mxc4005_data *data)
 	int ret;
 
 	ret = regmap_bulk_read(data->regmap, MXC4005_REG_XOUT_UPPER,
-			       (u8 *) data->buffer, sizeof(data->buffer));
+			       data->buffer, sizeof(data->buffer));
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read axes\n");
 		return ret;
@@ -150,7 +150,7 @@ static int mxc4005_read_axis(struct mxc4005_data *data,
 	__be16 reg;
 	int ret;
 
-	ret = regmap_bulk_read(data->regmap, addr, (u8 *) &reg, sizeof(reg));
+	ret = regmap_bulk_read(data->regmap, addr, &reg, sizeof(reg));
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read reg %02x\n", addr);
 		return ret;
Signature · 1 line
2.30.2
author maintainer
#265 lore raw

PATCH 265/348 iio: accel: mxc4005: Fix overread of data and alignment issue.

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit f65802284a3a337510d7f8f916c97d66c74f2e71 ]

The bulk read size is based on the size of an array that also has space for the timestamp alongside the channels.
Fix that and also fix alignment of the buffer passed
to iio_push_to_buffers_with_timestamp.

Found during an audit of all calls to this function.

Fixes 1ce0eda0f757 ("iio: mxc4005: add triggered buffer mode for mxc4005")
---
 drivers/iio/accel/mxc4005.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/iio/accel/mxc4005.c +7 -3
index 9d07642c0de1..d81b02642a0b 100644
@@ -56,7 +56,11 @@ struct mxc4005_data {
 	struct mutex mutex;
 	struct regmap *regmap;
 	struct iio_trigger *dready_trig;
-	__be16 buffer[8];
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		__be16 chans[3];
+		s64 timestamp __aligned(8);
+	} scan;
 	bool trigger_enabled;
 };
 
@@ -135,7 +139,7 @@ static int mxc4005_read_xyz(struct mxc4005_data *data)
 	int ret;
 
 	ret = regmap_bulk_read(data->regmap, MXC4005_REG_XOUT_UPPER,
-			       data->buffer, sizeof(data->buffer));
+			       data->scan.chans, sizeof(data->scan.chans));
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read axes\n");
 		return ret;
@@ -301,7 +305,7 @@ static irqreturn_t mxc4005_trigger_handler(int irq, void *private)
 	if (ret < 0)
 		goto err;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   pf->timestamp);
 
 err:
Signature · 1 line
2.30.2
author maintainer
#266 lore raw

PATCH 266/348 iio: accel: stk8312: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit f40a71ffec808e7e51848f63f0c0d3c32d65081b ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes 95c12bba51c3 ("iio: accel: Add buffer mode for Sensortek STK8312")
---
 drivers/iio/accel/stk8312.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/iio/accel/stk8312.c +8 -4
index 58c160ccdee7..be66b8523977 100644
@@ -103,7 +103,11 @@ struct stk8312_data {
 	u8 mode;
 	struct iio_trigger *dready_trig;
 	bool dready_trigger_on;
-	s8 buffer[16]; /* 3x8-bit channels + 5x8 padding + 64-bit timestamp */
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		s8 chans[3];
+		s64 timestamp __aligned(8);
+	} scan;
 };
 
 static IIO_CONST_ATTR(in_accel_scale_available, STK8312_SCALE_AVAIL);
@@ -438,7 +442,7 @@ static irqreturn_t stk8312_trigger_handler(int irq, void *p)
 		ret = i2c_smbus_read_i2c_block_data(data->client,
 						    STK8312_REG_XOUT,
 						    STK8312_ALL_CHANNEL_SIZE,
-						    data->buffer);
+						    data->scan.chans);
 		if (ret < STK8312_ALL_CHANNEL_SIZE) {
 			dev_err(&data->client->dev, "register read failed\n");
 			mutex_unlock(&data->lock);
@@ -452,12 +456,12 @@ static irqreturn_t stk8312_trigger_handler(int irq, void *p)
 				mutex_unlock(&data->lock);
 				goto err;
 			}
-			data->buffer[i++] = ret;
+			data->scan.chans[i++] = ret;
 		}
 	}
 	mutex_unlock(&data->lock);
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   pf->timestamp);
 err:
 	iio_trigger_notify_done(indio_dev->trig);
Signature · 1 line
2.30.2
author maintainer
#267 lore raw

PATCH 267/348 iio: accel: stk8ba50: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 334883894bc1e145a1e0f5de1b0d1b6a1133f0e6 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes db6a19b8251f ("iio: accel: Add trigger support for STK8BA50")
---
 drivers/iio/accel/stk8ba50.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)
drivers/iio/accel/stk8ba50.c +8 -9
index c70ddec29eb4..edba3c13a979 100644
@@ -91,12 +91,11 @@ struct stk8ba50_data {
 	u8 sample_rate_idx;
 	struct iio_trigger *dready_trig;
 	bool dready_trigger_on;
-	/*
-	 * 3 x 16-bit channels (10-bit data, 6-bit padding) +
-	 * 1 x 16 padding +
-	 * 4 x 16 64-bit timestamp
-	 */
-	s16 buffer[8];
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		s16 chans[3];
+		s64 timetamp __aligned(8);
+	} scan;
 };
 
 #define STK8BA50_ACCEL_CHANNEL(index, reg, axis) {			\
@@ -324,7 +323,7 @@ static irqreturn_t stk8ba50_trigger_handler(int irq, void *p)
 		ret = i2c_smbus_read_i2c_block_data(data->client,
 						    STK8BA50_REG_XOUT,
 						    STK8BA50_ALL_CHANNEL_SIZE,
-						    (u8 *)data->buffer);
+						    (u8 *)data->scan.chans);
 		if (ret < STK8BA50_ALL_CHANNEL_SIZE) {
 			dev_err(&data->client->dev, "register read failed\n");
 			goto err;
@@ -337,10 +336,10 @@ static irqreturn_t stk8ba50_trigger_handler(int irq, void *p)
 			if (ret < 0)
 				goto err;
 
-			data->buffer[i++] = ret;
+			data->scan.chans[i++] = ret;
 		}
 	}
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   pf->timestamp);
 err:
 	mutex_unlock(&data->lock);
Signature · 1 line
2.30.2
author maintainer
#268 lore raw

PATCH 268/348 iio: adc: ti-ads1015: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit d85d71dd1ab67eaa7351f69fec512d8f09d164e1 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes ecc24e72f437 ("iio: adc: Add TI ADS1015 ADC driver support")
Cc Daniel Baluta <[email protected]>
Cc Andy Shevchenko <[email protected]>
---
 drivers/iio/adc/ti-ads1015.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/iio/adc/ti-ads1015.c +8 -4
index 871690a47661..7929891f568e 100644
@@ -388,10 +388,14 @@ static irqreturn_t ads1015_trigger_handler(int irq, void *p)
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ads1015_data *data = iio_priv(indio_dev);
-	s16 buf[8]; /* 1x s16 ADC val + 3x s16 padding +  4x s16 timestamp */
+	/* Ensure natural alignment of timestamp */
+	struct {
+		s16 chan;
+		s64 timestamp __aligned(8);
+	} scan;
 	int chan, ret, res;
 
-	memset(buf, 0, sizeof(buf));
+	memset(&scan, 0, sizeof(scan));
 
 	mutex_lock(&data->lock);
 	chan = find_first_bit(indio_dev->active_scan_mask,
@@ -402,10 +406,10 @@ static irqreturn_t ads1015_trigger_handler(int irq, void *p)
 		goto err;
 	}
 
-	buf[0] = res;
+	scan.chan = res;
 	mutex_unlock(&data->lock);
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan,
 					   iio_get_time_ns(indio_dev));
 
 err:
Signature · 1 line
2.30.2
author maintainer
#269 lore raw

PATCH 269/348 iio: adc: vf610: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 7765dfaa22ea08abf0c175e7553826ba2a939632 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes 0010d6b44406 ("iio: adc: vf610: Add IIO buffer support for Vybrid ADC")
Cc Stefan-Gabriel Mirea <[email protected]>
Cc Sanchayan Maity <[email protected]>
---
 drivers/iio/adc/vf610_adc.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/iio/adc/vf610_adc.c +7 -3
index 98b30475bbc6..0d29fe974d70 100644
@@ -167,7 +167,11 @@ struct vf610_adc {
 	u32 sample_freq_avail[5];
 
 	struct completion completion;
-	u16 buffer[8];
+	/* Ensure the timestamp is naturally aligned */
+	struct {
+		u16 chan;
+		s64 timestamp __aligned(8);
+	} scan;
 };
 
 static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 };
@@ -579,9 +583,9 @@ static irqreturn_t vf610_adc_isr(int irq, void *dev_id)
 	if (coco & VF610_ADC_HS_COCO0) {
 		info->value = vf610_adc_read_data(info);
 		if (iio_buffer_enabled(indio_dev)) {
-			info->buffer[0] = info->value;
+			info->scan.chan = info->value;
 			iio_push_to_buffers_with_timestamp(indio_dev,
-					info->buffer,
+					&info->scan,
 					iio_get_time_ns(indio_dev));
 			iio_trigger_notify_done(indio_dev->trig);
 		} else
Signature · 1 line
2.30.2
author maintainer
#270 lore raw

PATCH 270/348 iio: gyro: bmg160: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 06778d881f3798ce93ffbbbf801234292250b598 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes 13426454b649 ("iio: bmg160: Separate i2c and core driver")
Cc Stephan Gerhold <[email protected]>
---
 drivers/iio/gyro/bmg160_core.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/iio/gyro/bmg160_core.c +7 -3
index 428ddfc13acb..276bed47e8d6 100644
@@ -96,7 +96,11 @@ struct bmg160_data {
 	struct iio_trigger *motion_trig;
 	struct iio_mount_matrix orientation;
 	struct mutex mutex;
-	s16 buffer[8];
+	/* Ensure naturally aligned timestamp */
+	struct {
+		s16 chans[3];
+		s64 timestamp __aligned(8);
+	} scan;
 	u32 dps_range;
 	int ev_enable_state;
 	int slope_thres;
@@ -880,12 +884,12 @@ static irqreturn_t bmg160_trigger_handler(int irq, void *p)
 
 	mutex_lock(&data->mutex);
 	ret = regmap_bulk_read(data->regmap, BMG160_REG_XOUT_L,
-			       data->buffer, AXIS_MAX * 2);
+			       data->scan.chans, AXIS_MAX * 2);
 	mutex_unlock(&data->mutex);
 	if (ret < 0)
 		goto err;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   pf->timestamp);
 err:
 	iio_trigger_notify_done(indio_dev->trig);
Signature · 1 line
2.30.2
author maintainer
#271 lore raw

PATCH 271/348 iio: humidity: am2315: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit f4ca2e2595d9fee65d5ce0d218b22ce00e5b2915 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes 0d96d5ead3f7 ("iio: humidity: Add triggered buffer support for AM2315")
---
 drivers/iio/humidity/am2315.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
drivers/iio/humidity/am2315.c +10 -6
index 3bac98e731d9..894922a315fe 100644
@@ -33,7 +33,11 @@
 struct am2315_data {
 	struct i2c_client *client;
 	struct mutex lock;
-	s16 buffer[8]; /* 2x16-bit channels + 2x16 padding + 4x16 timestamp */
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		s16 chans[2];
+		s64 timestamp __aligned(8);
+	} scan;
 };
 
 struct am2315_sensor_data {
@@ -167,20 +171,20 @@ static irqreturn_t am2315_trigger_handler(int irq, void *p)
 
 	mutex_lock(&data->lock);
 	if (*(indio_dev->active_scan_mask) == AM2315_ALL_CHANNEL_MASK) {
-		data->buffer[0] = sensor_data.hum_data;
-		data->buffer[1] = sensor_data.temp_data;
+		data->scan.chans[0] = sensor_data.hum_data;
+		data->scan.chans[1] = sensor_data.temp_data;
 	} else {
 		i = 0;
 		for_each_set_bit(bit, indio_dev->active_scan_mask,
 				 indio_dev->masklength) {
-			data->buffer[i] = (bit ? sensor_data.temp_data :
-						 sensor_data.hum_data);
+			data->scan.chans[i] = (bit ? sensor_data.temp_data :
+					       sensor_data.hum_data);
 			i++;
 		}
 	}
 	mutex_unlock(&data->lock);
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   pf->timestamp);
 err:
 	iio_trigger_notify_done(indio_dev->trig);
Signature · 1 line
2.30.2
author maintainer
#272 lore raw

PATCH 272/348 iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 19f1a254fe4949fff1e67db386409f48cf438bd7 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes 78f839029e1d ("iio: distance: srf08: add IIO driver for us ranger")
Cc Andreas Klinger <[email protected]>
---
 drivers/iio/proximity/srf08.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/iio/proximity/srf08.c +7 -7
index b23ce446b7be..c99bc514c5e1 100644
@@ -63,11 +63,11 @@ struct srf08_data {
 	int			range_mm;
 	struct mutex		lock;
 
-	/*
-	 * triggered buffer
-	 * 1x16-bit channel + 3x16 padding + 4x16 timestamp
-	 */
-	s16			buffer[8];
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		s16 chan;
+		s64 timestamp __aligned(8);
+	} scan;
 
 	/* Sensor-Type */
 	enum srf08_sensor_type	sensor_type;
@@ -190,9 +190,9 @@ static irqreturn_t srf08_trigger_handler(int irq, void *p)
 
 	mutex_lock(&data->lock);
 
-	data->buffer[0] = sensor_data;
+	data->scan.chan = sensor_data;
 	iio_push_to_buffers_with_timestamp(indio_dev,
-						data->buffer, pf->timestamp);
+					   &data->scan, pf->timestamp);
 
 	mutex_unlock(&data->lock);
 err:
Signature · 1 line
2.30.2
author maintainer
#273 lore raw

PATCH 273/348 iio: prox: pulsed-light: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 679cc377a03ff1944491eafc7355c1eb1fad4109 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes cb119d535083 ("iio: proximity: add support for PulsedLight LIDAR")
Cc Matt Ranostay <[email protected]>
---
 drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c +7 -3
index 67f85268b63d..0c7617022407 100644
@@ -43,7 +43,11 @@ struct lidar_data {
 	int (*xfer)(struct lidar_data *data, u8 reg, u8 *val, int len);
 	int i2c_enabled;
 
-	u16 buffer[8]; /* 2 byte distance + 8 byte timestamp */
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		u16 chan;
+		s64 timestamp __aligned(8);
+	} scan;
 };
 
 static const struct iio_chan_spec lidar_channels[] = {
@@ -228,9 +232,9 @@ static irqreturn_t lidar_trigger_handler(int irq, void *private)
 	struct lidar_data *data = iio_priv(indio_dev);
 	int ret;
 
-	ret = lidar_get_measurement(data, data->buffer);
+	ret = lidar_get_measurement(data, &data->scan.chan);
 	if (!ret) {
-		iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+		iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 						   iio_get_time_ns(indio_dev));
 	} else if (ret != -EINVAL) {
 		dev_err(&data->client->dev, "cannot read LIDAR measurement");
Signature · 1 line
2.30.2
author maintainer
#274 lore raw

PATCH 274/348 iio: prox: as3935: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 37eb8d8c64f2ecb3a5521ba1cc1fad973adfae41 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes 37b1ba2c68cf ("iio: proximity: as3935: fix buffer stack trashing")
Cc Matt Ranostay <[email protected]>
---
 drivers/iio/proximity/as3935.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/iio/proximity/as3935.c +7 -3
index b591c63bd6c4..718150a93133 100644
@@ -61,7 +61,11 @@ struct as3935_state {
 	unsigned long noise_tripped;
 	u32 tune_cap;
 	u32 nflwdth_reg;
-	u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		u8 chan;
+		s64 timestamp __aligned(8);
+	} scan;
 	u8 buf[2] ____cacheline_aligned;
 };
 
@@ -227,8 +231,8 @@ static irqreturn_t as3935_trigger_handler(int irq, void *private)
 	if (ret)
 		goto err_read;
 
-	st->buffer[0] = val & AS3935_DATA_MASK;
-	iio_push_to_buffers_with_timestamp(indio_dev, &st->buffer,
+	st->scan.chan = val & AS3935_DATA_MASK;
+	iio_push_to_buffers_with_timestamp(indio_dev, &st->scan,
 					   iio_get_time_ns(indio_dev));
 err_read:
 	iio_trigger_notify_done(indio_dev->trig);
Signature · 1 line
2.30.2
author maintainer
#275 lore raw

PATCH 275/348 iio: magn: hmc5843: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 1ef2f51e9fe424ccecca5bb0373d71b900c2cd41 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes 7247645f6865 ("iio: hmc5843: Move hmc5843 out of staging")
---
 drivers/iio/magnetometer/hmc5843.h      | 8 ++++++--
 drivers/iio/magnetometer/hmc5843_core.c | 4 ++--
 2 files changed, 8 insertions(+), 4 deletions(-)
drivers/iio/magnetometer/hmc5843.h +6 -2
index b0dee87a8b20..b68bb55909e1 100644
@@ -33,7 +33,8 @@ enum hmc5843_ids {
  * @lock:		update and read regmap data
  * @regmap:		hardware access register maps
  * @variant:		describe chip variants
- * @buffer:		3x 16-bit channels + padding + 64-bit timestamp
+ * @scan:		buffer to pack data for passing to
+ *			iio_push_to_buffers_with_timestamp()
  */
 struct hmc5843_data {
 	struct device *dev;
@@ -41,7 +42,10 @@ struct hmc5843_data {
 	struct regmap *regmap;
 	const struct hmc5843_chip_info *variant;
 	struct iio_mount_matrix orientation;
-	__be16 buffer[8];
+	struct {
+		__be16 chans[3];
+		s64 timestamp __aligned(8);
+	} scan;
 };
 
 int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
drivers/iio/magnetometer/hmc5843_core.c +2 -2
index c44a4292da92..aef78275260f 100644
@@ -446,13 +446,13 @@ static irqreturn_t hmc5843_trigger_handler(int irq, void *p)
 	}
 
 	ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS,
-			       data->buffer, 3 * sizeof(__be16));
+			       data->scan.chans, sizeof(data->scan.chans));
 
 	mutex_unlock(&data->lock);
 	if (ret < 0)
 		goto done;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   iio_get_time_ns(indio_dev));
 
 done:
Signature · 1 line
2.30.2
author maintainer
#276 lore raw

PATCH 276/348 iio: magn: bmc150: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 7692088f72865c41b6b531fd09486ee99a5da930 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes c91746a2361d ("iio: magn: Add support for BMC150 magnetometer")
Cc Stephan Gerhold <[email protected]>
Cc Linus Walleij <[email protected]>
---
 drivers/iio/magnetometer/bmc150_magn.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/iio/magnetometer/bmc150_magn.c +7 -4
index d4de16750b10..48685d785c1b 100644
@@ -136,8 +136,11 @@ struct bmc150_magn_data {
 	struct mutex mutex;
 	struct regmap *regmap;
 	struct iio_mount_matrix orientation;
-	/* 4 x 32 bits for x, y z, 4 bytes align, 64 bits timestamp */
-	s32 buffer[6];
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		s32 chans[3];
+		s64 timestamp __aligned(8);
+	} scan;
 	struct iio_trigger *dready_trig;
 	bool dready_trigger_on;
 	int max_odr;
@@ -673,11 +676,11 @@ static irqreturn_t bmc150_magn_trigger_handler(int irq, void *p)
 	int ret;
 
 	mutex_lock(&data->mutex);
-	ret = bmc150_magn_read_xyz(data, data->buffer);
+	ret = bmc150_magn_read_xyz(data, data->scan.chans);
 	if (ret < 0)
 		goto err;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   pf->timestamp);
 
 err:
Signature · 1 line
2.30.2
author maintainer
#277 lore raw

PATCH 277/348 iio: light: isl29125: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 3d4725194de6935dba2ad7c9cc075c885008f747 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes 6c25539cbc46 ("iio: Add Intersil isl29125 digital color light sensor driver")
---
 drivers/iio/light/isl29125.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/iio/light/isl29125.c +7 -3
index e37894f0ae0b..15906925e588 100644
@@ -51,7 +51,11 @@
 struct isl29125_data {
 	struct i2c_client *client;
 	u8 conf1;
-	u16 buffer[8]; /* 3x 16-bit, padding, 8 bytes timestamp */
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		u16 chans[3];
+		s64 timestamp __aligned(8);
+	} scan;
 };
 
 #define ISL29125_CHANNEL(_color, _si) { \
@@ -184,10 +188,10 @@ static irqreturn_t isl29125_trigger_handler(int irq, void *p)
 		if (ret < 0)
 			goto done;
 
-		data->buffer[j++] = ret;
+		data->scan.chans[j++] = ret;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 		iio_get_time_ns(indio_dev));
 
 done:
Signature · 1 line
2.30.2
author maintainer
#278 lore raw

PATCH 278/348 iio: light: tcs3414: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit ff08fbc22ab32ccc6690c21b0e5e1d402dcc076f ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes a244e7b57f0f ("iio: Add driver for AMS/TAOS tcs3414 digital color sensor")
---
 drivers/iio/light/tcs3414.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/iio/light/tcs3414.c +7 -3
index 7c0291c5fe76..85bfe3b63f4f 100644
@@ -53,7 +53,11 @@ struct tcs3414_data {
 	u8 control;
 	u8 gain;
 	u8 timing;
-	u16 buffer[8]; /* 4x 16-bit + 8 bytes timestamp */
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		u16 chans[4];
+		s64 timestamp __aligned(8);
+	} scan;
 };
 
 #define TCS3414_CHANNEL(_color, _si, _addr) { \
@@ -209,10 +213,10 @@ static irqreturn_t tcs3414_trigger_handler(int irq, void *p)
 		if (ret < 0)
 			goto done;
 
-		data->buffer[j++] = ret;
+		data->scan.chans[j++] = ret;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 		iio_get_time_ns(indio_dev));
 
 done:
Signature · 1 line
2.30.2
author maintainer
#279 lore raw

PATCH 279/348 iio: light: tcs3472: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit df2f37cffd6ed486d613e7ee22aadc8e49ae2dd3 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp().

Fixes tag is not strictly accurate as prior to that patch there was potentially an unaligned write. However, any backport past there will need to be done manually.

Fixes 0624bf847dd0 ("iio:tcs3472: Use iio_push_to_buffers_with_timestamp()")
---
 drivers/iio/light/tcs3472.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/iio/light/tcs3472.c +7 -3
index a30ad151653f..9ea543c5cf5e 100644
@@ -64,7 +64,11 @@ struct tcs3472_data {
 	u8 control;
 	u8 atime;
 	u8 apers;
-	u16 buffer[8]; /* 4 16-bit channels + 64-bit timestamp */
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		u16 chans[4];
+		s64 timestamp __aligned(8);
+	} scan;
 };
 
 static const struct iio_event_spec tcs3472_events[] = {
@@ -386,10 +390,10 @@ static irqreturn_t tcs3472_trigger_handler(int irq, void *p)
 		if (ret < 0)
 			goto done;
 
-		data->buffer[j++] = ret;
+		data->scan.chans[j++] = ret;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 		iio_get_time_ns(indio_dev));
 
 done:
Signature · 1 line
2.30.2
author maintainer
#280 lore raw

PATCH 280/348 iio: cros_ec_sensors: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 8dea228b174ac9637b567e5ef54f4c40db4b3c41 ]

The samples buffer is passed to iio_push_to_buffers_with_timestamp() which requires a buffer aligned to 8 bytes as it is assumed that the timestamp will be naturally aligned if present.

Fixes tag is inaccurate but prior to that likely manual backporting needed (for anything before 4.18) Earlier than that the include file to fix is drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h:
commit 974e6f02e27 ("iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.") present since kernel stable 4.10. (Thanks to Gwendal for tracking this down)

Fixes 5a0b8cb46624c ("iio: cros_ec: Move cros_ec_sensors_core.h in /include")
---
 include/linux/iio/common/cros_ec_sensors_core.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/iio/common/cros_ec_sensors_core.h +1 -1
index bb331e6356a9..a321531539dd 100644
@@ -68,7 +68,7 @@ struct cros_ec_sensors_core_state {
 		u16 scale;
 	} calib[CROS_EC_SENSOR_MAX_AXIS];
 	s8 sign[CROS_EC_SENSOR_MAX_AXIS];
-	u8 samples[CROS_EC_SAMPLE_SIZE];
+	u8 samples[CROS_EC_SAMPLE_SIZE] __aligned(8);
 
 	int (*read_ec_sensors_data)(struct iio_dev *indio_dev,
 				    unsigned long scan_mask, s16 *data);
Signature · 1 line
2.30.2
author maintainer
#281 lore raw

PATCH 281/348 iio: potentiostat: lmp91000: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 8979b67ec61abc232636400ee8c758a16a73c95f ]

Add __aligned(8) to ensure the buffer passed to iio_push_to_buffers_with_timestamp() is suitable for the naturally aligned timestamp that will be inserted.

Here structure is not used, because this buffer is also used elsewhere in the driver.

Fixes 67e17300dc1d ("iio: potentiostat: add LMP91000 support")
Cc Matt Ranostay <[email protected]>
---
 drivers/iio/potentiostat/lmp91000.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/potentiostat/lmp91000.c +2 -2
index a0e5f530faa9..d6db07264a7b 100644
@@ -71,8 +71,8 @@ struct lmp91000_data {
 
 	struct completion completion;
 	u8 chan_select;
-
-	u32 buffer[4]; /* 64-bit data + 64-bit timestamp */
+	/* 64-bit data + 64-bit naturally aligned timestamp */
+	u32 buffer[4] __aligned(8);
 };
 
 static const struct iio_chan_spec lmp91000_channels[] = {
Signature · 1 line
2.30.2
author maintainer
#282 lore raw

PATCH 282/348 ASoC: rk3328: fix missing clk_disable_unprepare() on error in rk3328_platform_probe()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit d14eece945a8068a017995f7512ea2beac21e34b ]

Fix the missing clk_disable_unprepare() before return from rk3328_platform_probe() in the error handling case.

Fixes c32759035ad2 ("ASoC: rockchip: support ACODEC for rk3328")
---
 sound/soc/codecs/rk3328_codec.c | 28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)
sound/soc/codecs/rk3328_codec.c +22 -6
index 287c962ba00d..514ebe16bbfa 100644
@@ -472,7 +472,8 @@ static int rk3328_platform_probe(struct platform_device *pdev)
 	rk3328->pclk = devm_clk_get(&pdev->dev, "pclk");
 	if (IS_ERR(rk3328->pclk)) {
 		dev_err(&pdev->dev, "can't get acodec pclk\n");
-		return PTR_ERR(rk3328->pclk);
+		ret = PTR_ERR(rk3328->pclk);
+		goto err_unprepare_mclk;
 	}
 
 	ret = clk_prepare_enable(rk3328->pclk);
@@ -482,19 +483,34 @@ static int rk3328_platform_probe(struct platform_device *pdev)
 	}
 
 	base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+	if (IS_ERR(base)) {
+		ret = PTR_ERR(base);
+		goto err_unprepare_pclk;
+	}
 
 	rk3328->regmap = devm_regmap_init_mmio(&pdev->dev, base,
 					       &rk3328_codec_regmap_config);
-	if (IS_ERR(rk3328->regmap))
-		return PTR_ERR(rk3328->regmap);
+	if (IS_ERR(rk3328->regmap)) {
+		ret = PTR_ERR(rk3328->regmap);
+		goto err_unprepare_pclk;
+	}
 
 	platform_set_drvdata(pdev, rk3328);
 
-	return devm_snd_soc_register_component(&pdev->dev, &soc_codec_rk3328,
+	ret = devm_snd_soc_register_component(&pdev->dev, &soc_codec_rk3328,
 					       rk3328_dai,
 					       ARRAY_SIZE(rk3328_dai));
+	if (ret)
+		goto err_unprepare_pclk;
+
+	return 0;
+
+err_unprepare_pclk:
+	clk_disable_unprepare(rk3328->pclk);
+
+err_unprepare_mclk:
+	clk_disable_unprepare(rk3328->mclk);
+	return ret;
 }
 
 static const struct of_device_id rk3328_codec_of_match[] = {
Signature · 1 line
2.30.2
author maintainer
#283 lore raw

PATCH 283/348 ASoC: hisilicon: fix missing clk_disable_unprepare() on error in hi6210_i2s_startup()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 375904e3931955fcf0a847f029b2492a117efc43 ]

After calling clk_prepare_enable(), clk_disable_unprepare() need be called when calling clk_set_rate() failed.

Fixes 0bf750f4cbe1 ("ASoC: hisilicon: Add hi6210 i2s audio driver")
---
 sound/soc/hisilicon/hi6210-i2s.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
sound/soc/hisilicon/hi6210-i2s.c +8 -6
index ab3b76d298b3..03470e8f3008 100644
@@ -102,18 +102,15 @@ static int hi6210_i2s_startup(struct snd_pcm_substream *substream,
 
 	for (n = 0; n < i2s->clocks; n++) {
 		ret = clk_prepare_enable(i2s->clk[n]);
-		if (ret) {
-			while (n--)
-				clk_disable_unprepare(i2s->clk[n]);
-			return ret;
-		}
+		if (ret)
+			goto err_unprepare_clk;
 	}
 
 	ret = clk_set_rate(i2s->clk[CLK_I2S_BASE], 49152000);
 	if (ret) {
 		dev_err(i2s->dev, "%s: setting 49.152MHz base rate failed %d\n",
 			__func__, ret);
-		return ret;
+		goto err_unprepare_clk;
 	}
 
 	/* enable clock before frequency division */
@@ -165,6 +162,11 @@ static int hi6210_i2s_startup(struct snd_pcm_substream *substream,
 	hi6210_write_reg(i2s, HII2S_SW_RST_N, val);
 
 	return 0;
+
+err_unprepare_clk:
+	while (n--)
+		clk_disable_unprepare(i2s->clk[n]);
+	return ret;
 }
 
 static void hi6210_i2s_shutdown(struct snd_pcm_substream *substream,
Signature · 1 line
2.30.2
author maintainer
#284 lore raw

PATCH 284/348 backlight: lm3630a_bl: Put fwnode in error case during ->probe()

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 6d1c32dbedd7d7e7372aa38033ec8782c39f6379 ]

device_for_each_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller.

Cc Brian Masney <[email protected]>
Cc Dan Murphy <[email protected]>
Fixes 8fbce8efe15cd ("backlight: lm3630a: Add firmware node support")
---
 drivers/video/backlight/lm3630a_bl.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/video/backlight/lm3630a_bl.c +3 -1
index 2d8e8192e4e2..f03ffe2bb237 100644
@@ -480,8 +480,10 @@ static int lm3630a_parse_node(struct lm3630a_chip *pchip,
 
 	device_for_each_child_node(pchip->dev, node) {
 		ret = lm3630a_parse_bank(pdata, node, &seen_led_sources);
-		if (ret)
+		if (ret) {
+			fwnode_handle_put(node);
 			return ret;
+		}
 	}
 
 	return ret;
Signature · 1 line
2.30.2
author maintainer
#285 lore raw

PATCH 285/348 ASoC: rsnd: tidyup loop on rsnd_adg_clk_query()

In reply to Greg Kroah-Hartman

From: Kuninori Morimoto <[email protected]>

[ Upstream commit cf9d5c6619fadfc41cf8f5154cb990cc38e3da85 ]

commit 06e8f5c842f2d ("ASoC: rsnd: don't call clk_get_rate() under atomic context") used saved clk_rate, thus for_each_rsnd_clk() is no longer needed. This patch fixes it.

Fixes 06e8f5c842f2d ("ASoC: rsnd: don't call clk_get_rate() under atomic context")
---
 sound/soc/sh/rcar/adg.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
sound/soc/sh/rcar/adg.c +1 -3
index b9aacf3d3b29..7532ab27a48d 100644
@@ -289,7 +289,6 @@ static void rsnd_adg_set_ssi_clk(struct rsnd_mod *ssi_mod, u32 val)
 int rsnd_adg_clk_query(struct rsnd_priv *priv, unsigned int rate)
 {
 	struct rsnd_adg *adg = rsnd_priv_to_adg(priv);
-	struct clk *clk;
 	int i;
 	int sel_table[] = {
 		[CLKA] = 0x1,
@@ -302,10 +301,9 @@ int rsnd_adg_clk_query(struct rsnd_priv *priv, unsigned int rate)
 	 * find suitable clock from
 	 * AUDIO_CLKA/AUDIO_CLKB/AUDIO_CLKC/AUDIO_CLKI.
 	 */
-	for_each_rsnd_clk(clk, adg, i) {
+	for (i = 0; i < CLKMAX; i++)
 		if (rate == adg->clk_rate[i])
 			return sel_table[i];
-	}
 
 	/*
 	 * find divided clock from BRGA/BRGB
Signature · 1 line
2.30.2
author maintainer
#286 lore raw

PATCH 286/348 Input: hil_kbd - fix error return code in hil_dev_connect()

In reply to Greg Kroah-Hartman

From: Zhen Lei <[email protected]>

[ Upstream commit d9b576917a1d0efa293801a264150a1b37691617 ]

Return error code -EINVAL rather than '0' when the combo devices are not supported.

Fixes fa71c605c2bb ("Input: combine hil_kbd and hil_ptr drivers")
---
 drivers/input/keyboard/hil_kbd.c | 1 +
 1 file changed, 1 insertion(+)
drivers/input/keyboard/hil_kbd.c +1 -0
index bb29a7c9a1c0..54afb38601b9 100644
@@ -512,6 +512,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
 		    HIL_IDD_NUM_AXES_PER_SET(*idd)) {
 			printk(KERN_INFO PREFIX
 				"combo devices are not supported.\n");
+			error = -EINVAL;
 			goto bail1;
 		}
 
Signature · 1 line
2.30.2
author maintainer
#287 lore raw

PATCH 287/348 mtd: partitions: redboot: seek fis-index-block in the right node

In reply to Greg Kroah-Hartman

From: Corentin Labbe <[email protected]>

[ Upstream commit 237960880960863fb41888763d635b384cffb104 ]

fis-index-block is seeked in the master node and not in the partitions node. For following binding and current usage, the driver need to check the partitions subnode.

Fixes c0e118c8a1a3 ("mtd: partitions: Add OF support to RedBoot partitions")
---
 drivers/mtd/parsers/redboot.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/mtd/parsers/redboot.c +6 -1
index 91146bdc4713..3ccd6363ee8c 100644
@@ -45,6 +45,7 @@ static inline int redboot_checksum(struct fis_image_desc *img)
 static void parse_redboot_of(struct mtd_info *master)
 {
 	struct device_node *np;
+	struct device_node *npart;
 	u32 dirblock;
 	int ret;
 
@@ -52,7 +53,11 @@ static void parse_redboot_of(struct mtd_info *master)
 	if (!np)
 		return;
 
-	ret = of_property_read_u32(np, "fis-index-block", &dirblock);
+	npart = of_get_child_by_name(np, "partitions");
+	if (!npart)
+		return;
+
+	ret = of_property_read_u32(npart, "fis-index-block", &dirblock);
 	if (ret)
 		return;
 
Signature · 1 line
2.30.2
author maintainer
#288 lore raw

PATCH 288/348 char: pcmcia: error out if num_bytes_read is greater than 4 in set_protocol()

In reply to Greg Kroah-Hartman

From: Yu Kuai <[email protected]>

[ Upstream commit 37188559c610f1b7eec83c8e448936c361c578de ]

Theoretically, it will cause index out of bounds error if 'num_bytes_read' is greater than 4. As we expect it(and was tested) never to be greater than 4, error out if it happens.

Fixes c1986ee9bea3 ("[PATCH] New Omnikey Cardman 4000 driver")
---
 drivers/char/pcmcia/cm4000_cs.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/char/pcmcia/cm4000_cs.c +4 -0
index 15bf585af5d3..44117169db91 100644
@@ -544,6 +544,10 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
 		io_read_num_rec_bytes(iobase, &num_bytes_read);
 		if (num_bytes_read >= 4) {
 			DEBUGP(2, dev, "NumRecBytes = %i\n", num_bytes_read);
+			if (num_bytes_read > 4) {
+				rc = -EIO;
+				goto exit_setprotocol;
+			}
 			break;
 		}
 		usleep_range(10000, 11000);
Signature · 1 line
2.30.2
author maintainer
#289 lore raw

PATCH 289/348 firmware: stratix10-svc: Fix a resource leak in an error handling path

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit d99247f9b542533ddbf87a3481a05473b8e48194 ]

If an error occurs after a successful 'kfifo_alloc()' call, it must be undone by a corresponding 'kfifo_free()' call, as already done in the remove function.

While at it, move the 'platform_device_put()' call to this new error handling path and explicitly return 0 in the success path.

---
 drivers/firmware/stratix10-svc.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)
drivers/firmware/stratix10-svc.c +15 -7
index b485321189e1..b2b4ba240fb1 100644
@@ -1026,24 +1026,32 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
 
 	/* add svc client device(s) */
 	svc = devm_kzalloc(dev, sizeof(*svc), GFP_KERNEL);
-	if (!svc)
-		return -ENOMEM;
+	if (!svc) {
+		ret = -ENOMEM;
+		goto err_free_kfifo;
+	}
 
 	svc->stratix10_svc_rsu = platform_device_alloc(STRATIX10_RSU, 0);
 	if (!svc->stratix10_svc_rsu) {
 		dev_err(dev, "failed to allocate %s device\n", STRATIX10_RSU);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto err_free_kfifo;
 	}
 
 	ret = platform_device_add(svc->stratix10_svc_rsu);
-	if (ret) {
-		platform_device_put(svc->stratix10_svc_rsu);
-		return ret;
-	}
+	if (ret)
+		goto err_put_device;
+
 	dev_set_drvdata(dev, svc);
 
 	pr_info("Intel Service Layer Driver Initialized\n");
 
+	return 0;
+
+err_put_device:
+	platform_device_put(svc->stratix10_svc_rsu);
+err_free_kfifo:
+	kfifo_free(&controller->svc_fifo);
 	return ret;
 }
 
Signature · 1 line
2.30.2
author maintainer
#290 lore raw

PATCH 290/348 tty: nozomi: Fix the error handling path of nozomi_card_init()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 6ae7d0f5a92b9619f6e3c307ce56b2cefff3f0e9 ]

The error handling path is broken and we may un-register things that have never been registered.

Update the loops index accordingly.

---
 drivers/tty/nozomi.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/tty/nozomi.c +5 -3
index 50590e50c3fe..af9b00918e4e 100644
@@ -1395,7 +1395,7 @@ static int nozomi_card_init(struct pci_dev *pdev,
 			NOZOMI_NAME, dc);
 	if (unlikely(ret)) {
 		dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq);
-		goto err_free_kfifo;
+		goto err_free_all_kfifo;
 	}
 
 	DBG1("base_addr: %p", dc->base_addr);
@@ -1433,13 +1433,15 @@ static int nozomi_card_init(struct pci_dev *pdev,
 	return 0;
 
 err_free_tty:
-	for (i = 0; i < MAX_PORT; ++i) {
+	for (i--; i >= 0; i--) {
 		tty_unregister_device(ntty_driver, dc->index_start + i);
 		tty_port_destroy(&dc->port[i].port);
 	}
 	free_irq(pdev->irq, dc);
+err_free_all_kfifo:
+	i = MAX_PORT;
 err_free_kfifo:
-	for (i = 0; i < MAX_PORT; i++)
+	for (i--; i >= PORT_MDM; i--)
 		kfifo_free(&dc->port[i].fifo_ul);
 err_free_sbuf:
 	kfree(dc->send_buf);
Signature · 1 line
2.30.2
author maintainer
#291 lore raw

PATCH 291/348 leds: lm3532: select regmap I2C API

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 99be74f61cb0292b518f5e6d7e5c6611555c2ec7 ]

Regmap APIs should be selected, otherwise link can fail

ERROR: modpost: "__devm_regmap_init_i2c" [drivers/leds/leds-lm3532.ko] undefined!

Fixes bc1b8492c764 ("leds: lm3532: Introduce the lm3532 LED driver")
Cc Dan Murphy <[email protected]>
---
 drivers/leds/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/leds/Kconfig +1 -0
index 1988de1d64c0..2cbf66d1c300 100644
@@ -144,6 +144,7 @@ config LEDS_LM3530
 
 config LEDS_LM3532
 	tristate "LCD Backlight driver for LM3532"
+	select REGMAP_I2C
 	depends on LEDS_CLASS
 	depends on I2C
 	help
Signature · 1 line
2.30.2
author maintainer
#292 lore raw

PATCH 292/348 leds: lm36274: cosmetic: rename lm36274_data to chip

In reply to Greg Kroah-Hartman

From: Marek Behún <[email protected]>

[ Upstream commit d3ab963cf980151f5f0ba16d842ddc80b232d9c0 ]

Rename this variable so that it is easier to read and easier to write in 80 columns. Also rename variable of this type in lm36274_brightness_set from led to chip, to be consistent.

---
 drivers/leds/leds-lm36274.c | 82 ++++++++++++++++++-------------------
 1 file changed, 40 insertions(+), 42 deletions(-)
drivers/leds/leds-lm36274.c +40 -42
index db842eeb7ca2..6c143551f10a 100644
@@ -41,37 +41,36 @@ struct lm36274 {
 };
 
 static int lm36274_brightness_set(struct led_classdev *led_cdev,
-				enum led_brightness brt_val)
+				  enum led_brightness brt_val)
 {
-	struct lm36274 *led = container_of(led_cdev, struct lm36274, led_dev);
+	struct lm36274 *chip = container_of(led_cdev, struct lm36274, led_dev);
 
-	return ti_lmu_common_set_brightness(&led->lmu_data, brt_val);
+	return ti_lmu_common_set_brightness(&chip->lmu_data, brt_val);
 }
 
-static int lm36274_init(struct lm36274 *lm36274_data)
+static int lm36274_init(struct lm36274 *chip)
 {
 	int enable_val = 0;
 	int i;
 
-	for (i = 0; i < lm36274_data->num_leds; i++)
-		enable_val |= (1 << lm36274_data->led_sources[i]);
+	for (i = 0; i < chip->num_leds; i++)
+		enable_val |= (1 << chip->led_sources[i]);
 
 	if (!enable_val) {
-		dev_err(lm36274_data->dev, "No LEDs were enabled\n");
+		dev_err(chip->dev, "No LEDs were enabled\n");
 		return -EINVAL;
 	}
 
 	enable_val |= LM36274_BL_EN;
 
-	return regmap_write(lm36274_data->regmap, LM36274_REG_BL_EN,
-			    enable_val);
+	return regmap_write(chip->regmap, LM36274_REG_BL_EN, enable_val);
 }
 
-static int lm36274_parse_dt(struct lm36274 *lm36274_data)
+static int lm36274_parse_dt(struct lm36274 *chip)
 {
 	struct fwnode_handle *child = NULL;
 	char label[LED_MAX_NAME_SIZE];
-	struct device *dev = &lm36274_data->pdev->dev;
+	struct device *dev = &chip->pdev->dev;
 	const char *name;
 	int child_cnt;
 	int ret = -EINVAL;
@@ -84,37 +83,37 @@ static int lm36274_parse_dt(struct lm36274 *lm36274_data)
 	device_for_each_child_node(dev, child) {
 		ret = fwnode_property_read_string(child, "label", &name);
 		if (ret)
-			snprintf(label, sizeof(label),
-				"%s::", lm36274_data->pdev->name);
+			snprintf(label, sizeof(label), "%s::",
+				 chip->pdev->name);
 		else
-			snprintf(label, sizeof(label),
-				 "%s:%s", lm36274_data->pdev->name, name);
+			snprintf(label, sizeof(label), "%s:%s",
+				 chip->pdev->name, name);
 
-		lm36274_data->num_leds = fwnode_property_count_u32(child, "led-sources");
-		if (lm36274_data->num_leds <= 0)
+		chip->num_leds = fwnode_property_count_u32(child, "led-sources");
+		if (chip->num_leds <= 0)
 			return -ENODEV;
 
 		ret = fwnode_property_read_u32_array(child, "led-sources",
-						     lm36274_data->led_sources,
-						     lm36274_data->num_leds);
+						     chip->led_sources,
+						     chip->num_leds);
 		if (ret) {
 			dev_err(dev, "led-sources property missing\n");
 			return ret;
 		}
 
 		fwnode_property_read_string(child, "linux,default-trigger",
-					&lm36274_data->led_dev.default_trigger);
+					    &chip->led_dev.default_trigger);
 
 	}
 
-	lm36274_data->lmu_data.regmap = lm36274_data->regmap;
-	lm36274_data->lmu_data.max_brightness = MAX_BRIGHTNESS_11BIT;
-	lm36274_data->lmu_data.msb_brightness_reg = LM36274_REG_BRT_MSB;
-	lm36274_data->lmu_data.lsb_brightness_reg = LM36274_REG_BRT_LSB;
+	chip->lmu_data.regmap = chip->regmap;
+	chip->lmu_data.max_brightness = MAX_BRIGHTNESS_11BIT;
+	chip->lmu_data.msb_brightness_reg = LM36274_REG_BRT_MSB;
+	chip->lmu_data.lsb_brightness_reg = LM36274_REG_BRT_LSB;
 
-	lm36274_data->led_dev.name = label;
-	lm36274_data->led_dev.max_brightness = MAX_BRIGHTNESS_11BIT;
-	lm36274_data->led_dev.brightness_set_blocking = lm36274_brightness_set;
+	chip->led_dev.name = label;
+	chip->led_dev.max_brightness = MAX_BRIGHTNESS_11BIT;
+	chip->led_dev.brightness_set_blocking = lm36274_brightness_set;
 
 	return 0;
 }
@@ -122,39 +121,38 @@ static int lm36274_parse_dt(struct lm36274 *lm36274_data)
 static int lm36274_probe(struct platform_device *pdev)
 {
 	struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent);
-	struct lm36274 *lm36274_data;
+	struct lm36274 *chip;
 	int ret;
 
-	lm36274_data = devm_kzalloc(&pdev->dev, sizeof(*lm36274_data),
-				    GFP_KERNEL);
-	if (!lm36274_data)
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
 		return -ENOMEM;
 
-	lm36274_data->pdev = pdev;
-	lm36274_data->dev = lmu->dev;
-	lm36274_data->regmap = lmu->regmap;
-	platform_set_drvdata(pdev, lm36274_data);
+	chip->pdev = pdev;
+	chip->dev = lmu->dev;
+	chip->regmap = lmu->regmap;
+	platform_set_drvdata(pdev, chip);
 
-	ret = lm36274_parse_dt(lm36274_data);
+	ret = lm36274_parse_dt(chip);
 	if (ret) {
-		dev_err(lm36274_data->dev, "Failed to parse DT node\n");
+		dev_err(chip->dev, "Failed to parse DT node\n");
 		return ret;
 	}
 
-	ret = lm36274_init(lm36274_data);
+	ret = lm36274_init(chip);
 	if (ret) {
-		dev_err(lm36274_data->dev, "Failed to init the device\n");
+		dev_err(chip->dev, "Failed to init the device\n");
 		return ret;
 	}
 
-	return led_classdev_register(lm36274_data->dev, &lm36274_data->led_dev);
+	return led_classdev_register(chip->dev, &chip->led_dev);
 }
 
 static int lm36274_remove(struct platform_device *pdev)
 {
-	struct lm36274 *lm36274_data = platform_get_drvdata(pdev);
+	struct lm36274 *chip = platform_get_drvdata(pdev);
 
-	led_classdev_unregister(&lm36274_data->led_dev);
+	led_classdev_unregister(&chip->led_dev);
 
 	return 0;
 }
Signature · 1 line
2.30.2
author maintainer
#293 lore raw

PATCH 293/348 leds: lm3692x: Put fwnode in any case during ->probe()

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit f55db1c7fadc2a29c9fa4ff3aec98dbb111f2206 ]

device_get_next_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller.

Fixes 9a5c1c64ac0a ("leds: lm3692x: Change DT calls to fwnode calls")
Cc Dan Murphy <[email protected]>
---
 drivers/leds/leds-lm3692x.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/leds/leds-lm3692x.c +4 -4
index 1ac9a44570ee..cc77ea048d9b 100644
@@ -358,6 +358,7 @@ static int lm3692x_probe_dt(struct lm3692x_led *led)
 
 	ret = fwnode_property_read_u32(child, "reg", &led->led_enable);
 	if (ret) {
+		fwnode_handle_put(child);
 		dev_err(&led->client->dev, "reg DT property missing\n");
 		return ret;
 	}
@@ -368,12 +369,11 @@ static int lm3692x_probe_dt(struct lm3692x_led *led)
 
 	ret = devm_led_classdev_register_ext(&led->client->dev, &led->led_dev,
 					     &init_data);
-	if (ret) {
+	if (ret)
 		dev_err(&led->client->dev, "led register err: %d\n", ret);
-		return ret;
-	}
 
-	return 0;
+	fwnode_handle_put(init_data.fwnode);
+	return ret;
 }
 
 static int lm3692x_probe(struct i2c_client *client,
Signature · 1 line
2.30.2
author maintainer
#294 lore raw

PATCH 294/348 scsi: FlashPoint: Rename si_flags field

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 4d431153e751caa93f3b7e6f6313446974e92253 ]

The BusLogic driver has build errors on ia64 due to a name collision (in the #included FlashPoint.c file). Rename the struct field in struct sccb_mgr_info from si_flags to si_mflags (manager flags) to mend the build.

This is the first problem. There are 50+ others after this one:

In file included from ../include/uapi/linux/signal.h:6,

                 from ../include/linux/signal_types.h:10,
                 from ../include/linux/sched.h:29,
                 from ../include/linux/hardirq.h:9,
                 from ../include/linux/interrupt.h:11,
                 from ../drivers/scsi/BusLogic.c:27:

../arch/ia64/include/uapi/asm/siginfo.h:15:27: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
15 | #define si_flags _sifields._sigfault._flags
| ^
../drivers/scsi/FlashPoint.c:43:6: note: in expansion of macro 'si_flags'

   43 |  u16 si_flags;
      |      ^~~~~~~~

In file included from ../drivers/scsi/BusLogic.c:51:
../drivers/scsi/FlashPoint.c: In function 'FlashPoint_ProbeHostAdapter':
../drivers/scsi/FlashPoint.c:1076:11: error: 'struct sccb_mgr_info' has no member named '_sifields'
1076 | pCardInfo->si_flags = 0x0000;
| ^~
../drivers/scsi/FlashPoint.c:1079:12: error: 'struct sccb_mgr_info' has no member named '_sifields'

Fixes 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit.")
Cc "James E.J. Bottomley" <[email protected]>
Cc "Martin K. Petersen" <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc Jens Axboe <[email protected]>
Cc Hannes Reinecke <[email protected]>
Cc Khalid Aziz <[email protected]>
Cc Khalid Aziz <[email protected]>
---
 drivers/scsi/FlashPoint.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)
drivers/scsi/FlashPoint.c +16 -16
index 0f17bd51088a..3b15fb25b5e6 100644
@@ -40,7 +40,7 @@ struct sccb_mgr_info {
 	u16 si_per_targ_ultra_nego;
 	u16 si_per_targ_no_disc;
 	u16 si_per_targ_wide_nego;
-	u16 si_flags;
+	u16 si_mflags;
 	unsigned char si_card_family;
 	unsigned char si_bustype;
 	unsigned char si_card_model[3];
@@ -1070,22 +1070,22 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)
 		ScamFlg =
 		    (unsigned char)FPT_utilEERead(ioport, SCAM_CONFIG / 2);
 
-	pCardInfo->si_flags = 0x0000;
+	pCardInfo->si_mflags = 0x0000;
 
 	if (i & 0x01)
-		pCardInfo->si_flags |= SCSI_PARITY_ENA;
+		pCardInfo->si_mflags |= SCSI_PARITY_ENA;
 
 	if (!(i & 0x02))
-		pCardInfo->si_flags |= SOFT_RESET;
+		pCardInfo->si_mflags |= SOFT_RESET;
 
 	if (i & 0x10)
-		pCardInfo->si_flags |= EXTENDED_TRANSLATION;
+		pCardInfo->si_mflags |= EXTENDED_TRANSLATION;
 
 	if (ScamFlg & SCAM_ENABLED)
-		pCardInfo->si_flags |= FLAG_SCAM_ENABLED;
+		pCardInfo->si_mflags |= FLAG_SCAM_ENABLED;
 
 	if (ScamFlg & SCAM_LEVEL2)
-		pCardInfo->si_flags |= FLAG_SCAM_LEVEL2;
+		pCardInfo->si_mflags |= FLAG_SCAM_LEVEL2;
 
 	j = (RD_HARPOON(ioport + hp_bm_ctrl) & ~SCSI_TERM_ENA_L);
 	if (i & 0x04) {
@@ -1101,7 +1101,7 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)
 
 	if (!(RD_HARPOON(ioport + hp_page_ctrl) & NARROW_SCSI_CARD))
 
-		pCardInfo->si_flags |= SUPPORT_16TAR_32LUN;
+		pCardInfo->si_mflags |= SUPPORT_16TAR_32LUN;
 
 	pCardInfo->si_card_family = HARPOON_FAMILY;
 	pCardInfo->si_bustype = BUSTYPE_PCI;
@@ -1137,15 +1137,15 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)
 
 	if (pCardInfo->si_card_model[1] == '3') {
 		if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
-			pCardInfo->si_flags |= LOW_BYTE_TERM;
+			pCardInfo->si_mflags |= LOW_BYTE_TERM;
 	} else if (pCardInfo->si_card_model[2] == '0') {
 		temp = RD_HARPOON(ioport + hp_xfer_pad);
 		WR_HARPOON(ioport + hp_xfer_pad, (temp & ~BIT(4)));
 		if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
-			pCardInfo->si_flags |= LOW_BYTE_TERM;
+			pCardInfo->si_mflags |= LOW_BYTE_TERM;
 		WR_HARPOON(ioport + hp_xfer_pad, (temp | BIT(4)));
 		if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
-			pCardInfo->si_flags |= HIGH_BYTE_TERM;
+			pCardInfo->si_mflags |= HIGH_BYTE_TERM;
 		WR_HARPOON(ioport + hp_xfer_pad, temp);
 	} else {
 		temp = RD_HARPOON(ioport + hp_ee_ctrl);
@@ -1163,9 +1163,9 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)
 		WR_HARPOON(ioport + hp_ee_ctrl, temp);
 		WR_HARPOON(ioport + hp_xfer_pad, temp2);
 		if (!(temp3 & BIT(7)))
-			pCardInfo->si_flags |= LOW_BYTE_TERM;
+			pCardInfo->si_mflags |= LOW_BYTE_TERM;
 		if (!(temp3 & BIT(6)))
-			pCardInfo->si_flags |= HIGH_BYTE_TERM;
+			pCardInfo->si_mflags |= HIGH_BYTE_TERM;
 	}
 
 	ARAM_ACCESS(ioport);
@@ -1272,7 +1272,7 @@ static void *FlashPoint_HardwareResetHostAdapter(struct sccb_mgr_info
 	WR_HARPOON(ioport + hp_arb_id, pCardInfo->si_id);
 	CurrCard->ourId = pCardInfo->si_id;
 
-	i = (unsigned char)pCardInfo->si_flags;
+	i = (unsigned char)pCardInfo->si_mflags;
 	if (i & SCSI_PARITY_ENA)
 		WR_HARPOON(ioport + hp_portctrl_1, (HOST_MODE8 | CHK_SCSI_P));
 
@@ -1286,14 +1286,14 @@ static void *FlashPoint_HardwareResetHostAdapter(struct sccb_mgr_info
 		j |= SCSI_TERM_ENA_H;
 	WR_HARPOON(ioport + hp_ee_ctrl, j);
 
-	if (!(pCardInfo->si_flags & SOFT_RESET)) {
+	if (!(pCardInfo->si_mflags & SOFT_RESET)) {
 
 		FPT_sresb(ioport, thisCard);
 
 		FPT_scini(thisCard, pCardInfo->si_id, 0);
 	}
 
-	if (pCardInfo->si_flags & POST_ALL_UNDERRRUNS)
+	if (pCardInfo->si_mflags & POST_ALL_UNDERRRUNS)
 		CurrCard->globalFlags |= F_NO_FILTER;
 
 	if (pCurrNvRam) {
Signature · 1 line
2.30.2
author maintainer
#295 lore raw

PATCH 295/348 fsi: core: Fix return of error values on failures

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 910810945707fe9877ca86a0dca4e585fd05e37b ]

Currently the cfam_read and cfam_write functions return the provided number of bytes given in the count parameter and not the error return code in variable rc, hence all failures of read/writes are being silently ignored. Fix this by returning the error code in rc.

Addresses-Coverity: ("Unused value")

---
 drivers/fsi/fsi-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/fsi/fsi-core.c +2 -2
index 9282239b4d95..cb980a60af0e 100644
@@ -718,7 +718,7 @@ static ssize_t cfam_read(struct file *filep, char __user *buf, size_t count,
 	rc = count;
  fail:
 	*offset = off;
-	return count;
+	return rc;
 }
 
 static ssize_t cfam_write(struct file *filep, const char __user *buf,
@@ -755,7 +755,7 @@ static ssize_t cfam_write(struct file *filep, const char __user *buf,
 	rc = count;
  fail:
 	*offset = off;
-	return count;
+	return rc;
 }
 
 static loff_t cfam_llseek(struct file *file, loff_t offset, int whence)
Signature · 1 line
2.30.2
author maintainer
#296 lore raw

PATCH 296/348 fsi: scom: Reset the FSI2PIB engine for any error

In reply to Greg Kroah-Hartman

From: Eddie James <[email protected]>

[ Upstream commit a5c317dac5567206ca7b6bc9d008dd6890c8bced ]

The error bits in the FSI2PIB status are only cleared by a reset. So the driver needs to perform a reset after seeing any of the FSI2PIB errors, otherwise subsequent operations will also look like failures.

---
 drivers/fsi/fsi-scom.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/fsi/fsi-scom.c +9 -7
index 004dc03ccf09..918367621086 100644
@@ -38,9 +38,10 @@
 #define SCOM_STATUS_PIB_RESP_MASK	0x00007000
 #define SCOM_STATUS_PIB_RESP_SHIFT	12
 
-#define SCOM_STATUS_ANY_ERR		(SCOM_STATUS_PROTECTION | \
-					 SCOM_STATUS_PARITY |	  \
-					 SCOM_STATUS_PIB_ABORT | \
+#define SCOM_STATUS_FSI2PIB_ERROR	(SCOM_STATUS_PROTECTION |	\
+					 SCOM_STATUS_PARITY |		\
+					 SCOM_STATUS_PIB_ABORT)
+#define SCOM_STATUS_ANY_ERR		(SCOM_STATUS_FSI2PIB_ERROR |	\
 					 SCOM_STATUS_PIB_RESP_MASK)
 /* SCOM address encodings */
 #define XSCOM_ADDR_IND_FLAG		BIT_ULL(63)
@@ -240,13 +241,14 @@ static int handle_fsi2pib_status(struct scom_device *scom, uint32_t status)
 {
 	uint32_t dummy = -1;
 
-	if (status & SCOM_STATUS_PROTECTION)
-		return -EPERM;
-	if (status & SCOM_STATUS_PARITY) {
+	if (status & SCOM_STATUS_FSI2PIB_ERROR)
 		fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
 				 sizeof(uint32_t));
+
+	if (status & SCOM_STATUS_PROTECTION)
+		return -EPERM;
+	if (status & SCOM_STATUS_PARITY)
 		return -EIO;
-	}
 	/* Return -EBUSY on PIB abort to force a retry */
 	if (status & SCOM_STATUS_PIB_ABORT)
 		return -EBUSY;
Signature · 1 line
2.30.2
author maintainer
#297 lore raw

PATCH 297/348 fsi: occ: Dont accept response from un-initialized OCC

In reply to Greg Kroah-Hartman

From: Eddie James <[email protected]>

[ Upstream commit 8a4659be08576141f47d47d94130eb148cb5f0df ]

If the OCC is not initialized and responds as such, the driver should continue waiting for a valid response until the timeout expires.

Fixes 7ed98dddb764 ("fsi: Add On-Chip Controller (OCC) driver")
---
 drivers/fsi/fsi-occ.c | 1 +
 1 file changed, 1 insertion(+)
drivers/fsi/fsi-occ.c +1 -0
index 7da9c81759ac..8f1644804570 100644
@@ -445,6 +445,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len,
 			goto done;
 
 		if (resp->return_status == OCC_RESP_CMD_IN_PRG ||
+		    resp->return_status == OCC_RESP_CRIT_INIT ||
 		    resp->seq_no != seq_no) {
 			rc = -ETIMEDOUT;
 
Signature · 1 line
2.30.2
author maintainer
#298 lore raw

PATCH 298/348 fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE

In reply to Greg Kroah-Hartman

From: Joachim Fenkes <[email protected]>

[ Upstream commit 95152433e46fdb36652ebdbea442356a16ae1fa6 ]

When the SBE requests a reset via the down FIFO, that is also the FIFO we should go and reset ;)

Fixes 9f4a8a2d7f9d ("fsi/sbefifo: Add driver for the SBE FIFO")
---
 drivers/fsi/fsi-sbefifo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/fsi/fsi-sbefifo.c +1 -1
index f54df9ebc8b3..655b45c1f6ba 100644
@@ -400,7 +400,7 @@ static int sbefifo_cleanup_hw(struct sbefifo *sbefifo)
 	/* The FIFO already contains a reset request from the SBE ? */
 	if (down_status & SBEFIFO_STS_RESET_REQ) {
 		dev_info(dev, "Cleanup: FIFO reset request set, resetting\n");
-		rc = sbefifo_regw(sbefifo, SBEFIFO_UP, SBEFIFO_PERFORM_RESET);
+		rc = sbefifo_regw(sbefifo, SBEFIFO_DOWN, SBEFIFO_PERFORM_RESET);
 		if (rc) {
 			sbefifo->broken = true;
 			dev_err(dev, "Cleanup: Reset reg write failed, rc=%d\n", rc);
Signature · 1 line
2.30.2
author maintainer
#299 lore raw

PATCH 299/348 fsi/sbefifo: Fix reset timeout

In reply to Greg Kroah-Hartman

From: Joachim Fenkes <[email protected]>

[ Upstream commit 9ab1428dfe2c66b51e0b41337cd0164da0ab6080 ]

On BMCs with lower timer resolution than 1ms, msleep(1) will take way longer than 1ms, so looping 10k times won't wait for 10s but significantly longer.

Fix this by using jiffies like the rest of the code.

Fixes 9f4a8a2d7f9d ("fsi/sbefifo: Add driver for the SBE FIFO")
---
 drivers/fsi/fsi-sbefifo.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/fsi/fsi-sbefifo.c +5 -3
index 655b45c1f6ba..c8ccc99e214f 100644
@@ -325,7 +325,8 @@ static int sbefifo_up_write(struct sbefifo *sbefifo, __be32 word)
 static int sbefifo_request_reset(struct sbefifo *sbefifo)
 {
 	struct device *dev = &sbefifo->fsi_dev->dev;
-	u32 status, timeout;
+	unsigned long end_time;
+	u32 status;
 	int rc;
 
 	dev_dbg(dev, "Requesting FIFO reset\n");
@@ -341,7 +342,8 @@ static int sbefifo_request_reset(struct sbefifo *sbefifo)
 	}
 
 	/* Wait for it to complete */
-	for (timeout = 0; timeout < SBEFIFO_RESET_TIMEOUT; timeout++) {
+	end_time = jiffies + msecs_to_jiffies(SBEFIFO_RESET_TIMEOUT);
+	while (!time_after(jiffies, end_time)) {
 		rc = sbefifo_regr(sbefifo, SBEFIFO_UP | SBEFIFO_STS, &status);
 		if (rc) {
 			dev_err(dev, "Failed to read UP fifo status during reset"
@@ -355,7 +357,7 @@ static int sbefifo_request_reset(struct sbefifo *sbefifo)
 			return 0;
 		}
 
-		msleep(1);
+		cond_resched();
 	}
 	dev_err(dev, "FIFO reset timed out\n");
 
Signature · 1 line
2.30.2
author maintainer
#300 lore raw

PATCH 300/348 visorbus: fix error return code in visorchipset_init()

In reply to Greg Kroah-Hartman

From: Zhen Lei <[email protected]>

[ Upstream commit ce52ec5beecc1079c251f60e3973b3758f60eb59 ]

Commit 1366a3db3dcf ("staging: unisys: visorbus: visorchipset_init clean up gotos") assigns the initial value -ENODEV to the local variable 'err', and the first several error branches will return this value after "goto error". But commit f1f537c2e7f5 ("staging: unisys: visorbus: Consolidate controlvm channel creation.") overwrites 'err' in the middle of the way. As a result, some error branches do not successfully return the initial value -ENODEV of 'err', but return 0.

In addition, when kzalloc() fails, -ENOMEM should be returned instead of -ENODEV.

Fixes f1f537c2e7f5 ("staging: unisys: visorbus: Consolidate controlvm channel creation.")
---
 drivers/visorbus/visorchipset.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/visorbus/visorchipset.c +4 -2
index cb1eb7e05f87..5668cad86e37 100644
@@ -1561,7 +1561,7 @@ schedule_out:
 
 static int visorchipset_init(struct acpi_device *acpi_device)
 {
-	int err = -ENODEV;
+	int err = -ENOMEM;
 	struct visorchannel *controlvm_channel;
 
 	chipset_dev = kzalloc(sizeof(*chipset_dev), GFP_KERNEL);
@@ -1584,8 +1584,10 @@ static int visorchipset_init(struct acpi_device *acpi_device)
 				 "controlvm",
 				 sizeof(struct visor_controlvm_channel),
 				 VISOR_CONTROLVM_CHANNEL_VERSIONID,
-				 VISOR_CHANNEL_SIGNATURE))
+				 VISOR_CHANNEL_SIGNATURE)) {
+		err = -ENODEV;
 		goto error_delete_groups;
+	}
 	/* if booting in a crash kernel */
 	if (is_kdump_kernel())
 		INIT_DELAYED_WORK(&chipset_dev->periodic_controlvm_work,
Signature · 1 line
2.30.2
author maintainer
#301 lore raw

PATCH 301/348 s390: appldata depends on PROC_SYSCTL

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 5d3516b3647621d5a1180672ea9e0817fb718ada ]

APPLDATA_BASE should depend on PROC_SYSCTL instead of PROC_FS. Building with PROC_FS but not PROC_SYSCTL causes a build error, since appldata_base.c uses data and APIs from fs/proc/proc_sysctl.c.

arch/s390/appldata/appldata_base.o: in function `appldata_generic_handler':
appldata_base.c:(.text+0x192): undefined reference to `sysctl_vals'

Fixes c185b783b099 ("[S390] Remove config options.")
Cc Heiko Carstens <[email protected]>
Cc Vasily Gorbik <[email protected]>
Cc Christian Borntraeger <[email protected]>
---
 arch/s390/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/s390/Kconfig +1 -1
index 43a81d0ad507..0023b78391f1 100644
@@ -920,7 +920,7 @@ config CMM_IUCV
 config APPLDATA_BASE
 	def_bool n
 	prompt "Linux - VM Monitor Stream, base infrastructure"
-	depends on PROC_FS
+	depends on PROC_SYSCTL
 	help
 	  This provides a kernel interface for creating and updating z/VM APPLDATA
 	  monitor records. The monitor records are updated at certain time
Signature · 1 line
2.30.2
author maintainer
#302 lore raw

PATCH 302/348 iommu/dma: Fix IOVA reserve dma ranges

In reply to Greg Kroah-Hartman

From: Srinath Mannam <[email protected]>

[ Upstream commit 571f316074a203e979ea90211d9acf423dfe5f46 ]

Fix IOVA reserve failure in the case when address of first memory region listed in dma-ranges is equal to 0x0.

Fixes aadad097cd46f ("iommu/dma: Reserve IOVA for PCIe inaccessible DMA address")
---
 drivers/iommu/dma-iommu.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/iommu/dma-iommu.c +4 -2
index 76bd2309e023..d3b6898626e7 100644
@@ -216,9 +216,11 @@ resv_iova:
 			lo = iova_pfn(iovad, start);
 			hi = iova_pfn(iovad, end);
 			reserve_iova(iovad, lo, hi);
-		} else {
+		} else if (end < start) {
 			/* dma_ranges list should be sorted */
-			dev_err(&dev->dev, "Failed to reserve IOVA\n");
+			dev_err(&dev->dev,
+				"Failed to reserve IOVA [%#010llx-%#010llx]\n",
+				start, end);
 			return -EINVAL;
 		}
 
Signature · 1 line
2.30.2
author maintainer
#303 lore raw

PATCH 303/348 ASoC: mediatek: mtk-btcvsd: Fix an error handling path in mtk_btcvsd_snd_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit b6052c3c7a78f5e2b9756c92ef77c0b56435f107 ]

If an error occurs after a successful 'of_iomap()' call, it must be undone by a corresponding 'iounmap()' call, as already done in the remove function.

While at it, remove the useless initialization of 'ret' at the beginning of the function.

---
 sound/soc/mediatek/common/mtk-btcvsd.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)
sound/soc/mediatek/common/mtk-btcvsd.c +18 -6
index d00608c73c6e..b66f7dee1e14 100644
@@ -1302,7 +1302,7 @@ static const struct snd_soc_component_driver mtk_btcvsd_snd_platform = {
 
 static int mtk_btcvsd_snd_probe(struct platform_device *pdev)
 {
-	int ret = 0;
+	int ret;
 	int irq_id;
 	u32 offset[5] = {0, 0, 0, 0, 0};
 	struct mtk_btcvsd_snd *btcvsd;
@@ -1358,7 +1358,8 @@ static int mtk_btcvsd_snd_probe(struct platform_device *pdev)
 	btcvsd->bt_sram_bank2_base = of_iomap(dev->of_node, 1);
 	if (!btcvsd->bt_sram_bank2_base) {
 		dev_err(dev, "iomap bt_sram_bank2_base fail\n");
-		return -EIO;
+		ret = -EIO;
+		goto unmap_pkv_err;
 	}
 
 	btcvsd->infra = syscon_regmap_lookup_by_phandle(dev->of_node,
@@ -1366,7 +1367,8 @@ static int mtk_btcvsd_snd_probe(struct platform_device *pdev)
 	if (IS_ERR(btcvsd->infra)) {
 		dev_err(dev, "cannot find infra controller: %ld\n",
 			PTR_ERR(btcvsd->infra));
-		return PTR_ERR(btcvsd->infra);
+		ret = PTR_ERR(btcvsd->infra);
+		goto unmap_bank2_err;
 	}
 
 	/* get offset */
@@ -1375,7 +1377,7 @@ static int mtk_btcvsd_snd_probe(struct platform_device *pdev)
 					 ARRAY_SIZE(offset));
 	if (ret) {
 		dev_warn(dev, "%s(), get offset fail, ret %d\n", __func__, ret);
-		return ret;
+		goto unmap_bank2_err;
 	}
 	btcvsd->infra_misc_offset = offset[0];
 	btcvsd->conn_bt_cvsd_mask = offset[1];
@@ -1394,8 +1396,18 @@ static int mtk_btcvsd_snd_probe(struct platform_device *pdev)
 	mtk_btcvsd_snd_set_state(btcvsd, btcvsd->tx, BT_SCO_STATE_IDLE);
 	mtk_btcvsd_snd_set_state(btcvsd, btcvsd->rx, BT_SCO_STATE_IDLE);
 
-	return devm_snd_soc_register_component(dev, &mtk_btcvsd_snd_platform,
-					       NULL, 0);
+	ret = devm_snd_soc_register_component(dev, &mtk_btcvsd_snd_platform,
+					      NULL, 0);
+	if (ret)
+		goto unmap_bank2_err;
+
+	return 0;
+
+unmap_bank2_err:
+	iounmap(btcvsd->bt_sram_bank2_base);
+unmap_pkv_err:
+	iounmap(btcvsd->bt_pkv_base);
+	return ret;
 }
 
 static int mtk_btcvsd_snd_remove(struct platform_device *pdev)
Signature · 1 line
2.30.2
author maintainer
#304 lore raw

PATCH 304/348 usb: gadget: f_fs: Fix setting of device and driver data cross-references

In reply to Greg Kroah-Hartman

From: Andrew Gabbasov <[email protected]>

[ Upstream commit ecfbd7b9054bddb12cea07fda41bb3a79a7b0149 ]

FunctionFS device structure 'struct ffs_dev' and driver data structure 'struct ffs_data' are bound to each other with cross-reference pointers 'ffs_data->private_data' and 'ffs_dev->ffs_data'. While the first one is supposed to be valid through the whole life of 'struct ffs_data' (and while 'struct ffs_dev' exists non-freed), the second one is cleared in 'ffs_closed()' (called from 'ffs_data_reset()' or the last 'ffs_data_put()'). This can be called several times, alternating in different order with 'ffs_free_inst()', that, if possible, clears the other cross-reference.

As a result, different cases of these calls order may leave stale cross-reference pointers, used when the pointed structure is already freed. Even if it occasionally doesn't cause kernel crash, this error is reported by KASAN-enabled kernel configuration.

For example, the case [last 'ffs_data_put()' - 'ffs_free_inst()'] was fixed by commit cdafb6d8b8da ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst").

The other case ['ffs_data_reset()' - 'ffs_free_inst()' - 'ffs_data_put()'] now causes KASAN reported error [1], when 'ffs_data_reset()' clears 'ffs_dev->ffs_data', then 'ffs_free_inst()' frees the 'struct ffs_dev', but can't clear 'ffs_data->private_data', which is then accessed in 'ffs_closed()' called from 'ffs_data_put()'. This happens since 'ffs_dev->ffs_data' reference is cleared too early.

Moreover, one more use case, when 'ffs_free_inst()' is called immediately after mounting FunctionFS device (that is before the descriptors are written and 'ffs_ready()' is called), and then 'ffs_data_reset()' or 'ffs_data_put()' is called from accessing "ep0" file or unmounting the device. This causes KASAN error report like [2], since 'ffs_dev->ffs_data' is not yet set when 'ffs_free_inst()' can't properly clear 'ffs_data->private_data', that is later accessed to freed structure.

Fix these (and may be other) cases of stale pointers access by moving setting and clearing of the mentioned cross-references to the single places, setting both of them when 'struct ffs_data' is created and bound to 'struct ffs_dev', and clearing both of them when one of the structures is destroyed. It seems convenient to make this pointer initialization and structures binding in 'ffs_acquire_dev()' and make pointers clearing in 'ffs_release_dev()'. This required some changes in these functions parameters and return types.

Also, 'ffs_release_dev()' calling requires some cleanup, fixing minor issues, like (1) 'ffs_release_dev()' is not called if 'ffs_free_inst()' is called without unmounting the device, and "release_dev" callback is not called at all, or (2) "release_dev" callback is called before "ffs_closed" callback on unmounting, which seems to be not correctly nested with "acquire_dev" and "ffs_ready" callbacks.
Make this cleanup togther with other mentioned 'ffs_release_dev()' changes.

[1]
==================================================================

root@rcar-gen3:~# mkdir /dev/cfs
root@rcar-gen3:~# mkdir /dev/ffs
root@rcar-gen3:~# modprobe libcomposite
root@rcar-gen3:~# mount -t configfs none /dev/cfs
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[   64.340664] file system registered
root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs
root@rcar-gen3:~# cd /dev/ffs
root@rcar-gen3:/dev/ffs# /home/root/ffs-test
ffs-test: info: ep0: writing descriptors (in v2 format)
[   83.181442] read descriptors
[   83.186085] read strings
ffs-test: info: ep0: writing strings
ffs-test: dbg:  ep1: starting
ffs-test: dbg:  ep2: starting
ffs-test: info: ep1: starts
ffs-test: info: ep2: starts
ffs-test: info: ep0: starts

^C

root@rcar-gen3:/dev/ffs# cd /home/root/
root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[   98.935061] unloading
root@rcar-gen3:~# umount /dev/ffs
[  102.734301] ==================================================================
[  102.742059] BUG: KASAN: use-after-free in ffs_release_dev+0x64/0xa8 [usb_f_fs]
[  102.749683] Write of size 1 at addr ffff0004d46ff549 by task umount/2997
[  102.756709]
[  102.758311] CPU: 0 PID: 2997 Comm: umount Not tainted 5.13.0-rc4+ #8
[  102.764971] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[  102.772179] Call trace:
[  102.774779]  dump_backtrace+0x0/0x330
[  102.778653]  show_stack+0x20/0x2c
[  102.782152]  dump_stack+0x11c/0x1ac
[  102.785833]  print_address_description.constprop.0+0x30/0x274
[  102.791862]  kasan_report+0x14c/0x1c8
[  102.795719]  __asan_report_store1_noabort+0x34/0x58
[  102.800840]  ffs_release_dev+0x64/0xa8 [usb_f_fs]
[  102.805801]  ffs_fs_kill_sb+0x50/0x84 [usb_f_fs]
[  102.810663]  deactivate_locked_super+0xa0/0xf0
[  102.815339]  deactivate_super+0x98/0xac
[  102.819378]  cleanup_mnt+0xd0/0x1b0
[  102.823057]  __cleanup_mnt+0x1c/0x28
[  102.826823]  task_work_run+0x104/0x180
[  102.830774]  do_notify_resume+0x458/0x14e0
[  102.835083]  work_pending+0xc/0x5f8
[  102.838762]
[  102.840357] Allocated by task 2988:
[  102.844032]  kasan_save_stack+0x28/0x58
[  102.848071]  kasan_set_track+0x28/0x3c
[  102.852016]  ____kasan_kmalloc+0x84/0x9c
[  102.856142]  __kasan_kmalloc+0x10/0x1c
[  102.860088]  __kmalloc+0x214/0x2f8
[  102.863678]  kzalloc.constprop.0+0x14/0x20 [usb_f_fs]
[  102.868990]  ffs_alloc_inst+0x8c/0x208 [usb_f_fs]
[  102.873942]  try_get_usb_function_instance+0xf0/0x164 [libcomposite]
[  102.880629]  usb_get_function_instance+0x64/0x68 [libcomposite]
[  102.886858]  function_make+0x128/0x1ec [libcomposite]
[  102.892185]  configfs_mkdir+0x330/0x590 [configfs]
[  102.897245]  vfs_mkdir+0x12c/0x1bc
[  102.900835]  do_mkdirat+0x180/0x1d0
[  102.904513]  __arm64_sys_mkdirat+0x80/0x94
[  102.908822]  invoke_syscall+0xf8/0x25c
[  102.912772]  el0_svc_common.constprop.0+0x150/0x1a0
[  102.917891]  do_el0_svc+0xa0/0xd4
[  102.921386]  el0_svc+0x24/0x34
[  102.924613]  el0_sync_handler+0xcc/0x154
[  102.928743]  el0_sync+0x198/0x1c0
[  102.932238]
[  102.933832] Freed by task 2996:
[  102.937144]  kasan_save_stack+0x28/0x58
[  102.941181]  kasan_set_track+0x28/0x3c
[  102.945128]  kasan_set_free_info+0x28/0x4c
[  102.949435]  ____kasan_slab_free+0x104/0x118
[  102.953921]  __kasan_slab_free+0x18/0x24
[  102.958047]  slab_free_freelist_hook+0x148/0x1f0
[  102.962897]  kfree+0x318/0x440
[  102.966123]  ffs_free_inst+0x164/0x2d8 [usb_f_fs]
[  102.971075]  usb_put_function_instance+0x84/0xa4 [libcomposite]
[  102.977302]  ffs_attr_release+0x18/0x24 [usb_f_fs]
[  102.982344]  config_item_put+0x140/0x1a4 [configfs]
[  102.987486]  configfs_rmdir+0x3fc/0x518 [configfs]
[  102.992535]  vfs_rmdir+0x114/0x234
[  102.996122]  do_rmdir+0x274/0x2b0
[  102.999617]  __arm64_sys_unlinkat+0x94/0xc8
[  103.004015]  invoke_syscall+0xf8/0x25c
[  103.007961]  el0_svc_common.constprop.0+0x150/0x1a0
[  103.013080]  do_el0_svc+0xa0/0xd4
[  103.016575]  el0_svc+0x24/0x34
[  103.019801]  el0_sync_handler+0xcc/0x154
[  103.023930]  el0_sync+0x198/0x1c0
[  103.027426]
[  103.029020] The buggy address belongs to the object at ffff0004d46ff500
[  103.029020]  which belongs to the cache kmalloc-128 of size 128
[  103.042079] The buggy address is located 73 bytes inside of
[  103.042079]  128-byte region [ffff0004d46ff500, ffff0004d46ff580)
[  103.054236] The buggy address belongs to the page:
[  103.059262] page:0000000021aa849b refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0004d46fee00 pfn:0x5146fe
[  103.070437] head:0000000021aa849b order:1 compound_mapcount:0
[  103.076456] flags: 0x8000000000010200(slab|head|zone=2)
[  103.081948] raw: 8000000000010200 fffffc0013521a80 0000000d0000000d ffff0004c0002300
[  103.090052] raw: ffff0004d46fee00 000000008020001e 00000001ffffffff 0000000000000000
[  103.098150] page dumped because: kasan: bad access detected
[  103.103985]
[  103.105578] Memory state around the buggy address:
[  103.110602]  ffff0004d46ff400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  103.118161]  ffff0004d46ff480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  103.125726] >ffff0004d46ff500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  103.133284]                                               ^
[  103.139120]  ffff0004d46ff580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  103.146679]  ffff0004d46ff600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  103.154238] ==================================================================
[  103.161792] Disabling lock debugging due to kernel taint
[  103.167319] Unable to handle kernel paging request at virtual address 0037801d6000018e
[  103.175406] Mem abort info:
[  103.178457]   ESR = 0x96000004
[  103.181609]   EC = 0x25: DABT (current EL), IL = 32 bits
[  103.187020]   SET = 0, FnV = 0
[  103.190185]   EA = 0, S1PTW = 0
[  103.193417] Data abort info:
[  103.196385]   ISV = 0, ISS = 0x00000004
[  103.200315]   CM = 0, WnR = 0
[  103.203366] [0037801d6000018e] address between user and kernel address ranges
[  103.210611] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[  103.216231] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk sata_rc4
[  103.259233] CPU: 0 PID: 2997 Comm: umount Tainted: G    B             5.13.0-rc4+ #8
[  103.267031] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[  103.273951] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--)
[  103.280001] pc : ffs_data_clear+0x138/0x370 [usb_f_fs]
[  103.285197] lr : ffs_data_clear+0x124/0x370 [usb_f_fs]
[  103.290385] sp : ffff800014777a80
[  103.293725] x29: ffff800014777a80 x28: ffff0004d7649c80 x27: 0000000000000000
[  103.300931] x26: ffff800014777fb0 x25: ffff60009aec9394 x24: ffff0004d7649ca4
[  103.308136] x23: 1fffe0009a3d063a x22: dfff800000000000 x21: ffff0004d1e831d0
[  103.315340] x20: e1c000eb00000bb4 x19: ffff0004d1e83000 x18: 0000000000000000
[  103.322545] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[  103.329748] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000012ef658
[  103.336952] x11: ffff7000012ef658 x10: 0720072007200720 x9 : ffff800011322648
[  103.344157] x8 : ffff800014777818 x7 : ffff80000977b2c7 x6 : 0000000000000000
[  103.351359] x5 : 0000000000000001 x4 : ffff7000012ef659 x3 : 0000000000000001
[  103.358562] x2 : 0000000000000000 x1 : 1c38001d6000018e x0 : e1c000eb00000c70
[  103.365766] Call trace:
[  103.368235]  ffs_data_clear+0x138/0x370 [usb_f_fs]
[  103.373076]  ffs_data_reset+0x20/0x304 [usb_f_fs]
[  103.377829]  ffs_data_closed+0x1ec/0x244 [usb_f_fs]
[  103.382755]  ffs_fs_kill_sb+0x70/0x84 [usb_f_fs]
[  103.387420]  deactivate_locked_super+0xa0/0xf0
[  103.391905]  deactivate_super+0x98/0xac
[  103.395776]  cleanup_mnt+0xd0/0x1b0
[  103.399299]  __cleanup_mnt+0x1c/0x28
[  103.402906]  task_work_run+0x104/0x180
[  103.406691]  do_notify_resume+0x458/0x14e0
[  103.410823]  work_pending+0xc/0x5f8
[  103.414351] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821)
[  103.420490] ---[ end trace 57b43a50e8244f57 ]---
Segmentation fault
root@rcar-gen3:~#
==================================================================

[2]
==================================================================

root@rcar-gen3:~# mkdir /dev/ffs
root@rcar-gen3:~# modprobe libcomposite
root@rcar-gen3:~#
root@rcar-gen3:~# mount -t configfs none /dev/cfs
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[   54.766480] file system registered
root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs
root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[   63.197597] unloading
root@rcar-gen3:~# cat /dev/ffs/ep0
cat: read error:[   67.213506] ==================================================================
[   67.222095] BUG: KASAN: use-after-free in ffs_data_clear+0x70/0x370 [usb_f_fs]
[   67.229699] Write of size 1 at addr ffff0004c26e974a by task cat/2994
[   67.236446]
[   67.238045] CPU: 0 PID: 2994 Comm: cat Not tainted 5.13.0-rc4+ #8
[   67.244431] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[   67.251624] Call trace:
[   67.254212]  dump_backtrace+0x0/0x330
[   67.258081]  show_stack+0x20/0x2c
[   67.261579]  dump_stack+0x11c/0x1ac
[   67.265260]  print_address_description.constprop.0+0x30/0x274
[   67.271286]  kasan_report+0x14c/0x1c8
[   67.275143]  __asan_report_store1_noabort+0x34/0x58
[   67.280265]  ffs_data_clear+0x70/0x370 [usb_f_fs]
[   67.285220]  ffs_data_reset+0x20/0x304 [usb_f_fs]
[   67.290172]  ffs_data_closed+0x240/0x244 [usb_f_fs]
[   67.295305]  ffs_ep0_release+0x40/0x54 [usb_f_fs]
[   67.300256]  __fput+0x304/0x580
[   67.303576]  ____fput+0x18/0x24
[   67.306893]  task_work_run+0x104/0x180
[   67.310846]  do_notify_resume+0x458/0x14e0
[   67.315154]  work_pending+0xc/0x5f8
[   67.318834]
[   67.320429] Allocated by task 2988:
[   67.324105]  kasan_save_stack+0x28/0x58
[   67.328144]  kasan_set_track+0x28/0x3c
[   67.332090]  ____kasan_kmalloc+0x84/0x9c
[   67.336217]  __kasan_kmalloc+0x10/0x1c
[   67.340163]  __kmalloc+0x214/0x2f8
[   67.343754]  kzalloc.constprop.0+0x14/0x20 [usb_f_fs]
[   67.349066]  ffs_alloc_inst+0x8c/0x208 [usb_f_fs]
[   67.354017]  try_get_usb_function_instance+0xf0/0x164 [libcomposite]
[   67.360705]  usb_get_function_instance+0x64/0x68 [libcomposite]
[   67.366934]  function_make+0x128/0x1ec [libcomposite]
[   67.372260]  configfs_mkdir+0x330/0x590 [configfs]
[   67.377320]  vfs_mkdir+0x12c/0x1bc
[   67.380911]  do_mkdirat+0x180/0x1d0
[   67.384589]  __arm64_sys_mkdirat+0x80/0x94
[   67.388899]  invoke_syscall+0xf8/0x25c
[   67.392850]  el0_svc_common.constprop.0+0x150/0x1a0
[   67.397969]  do_el0_svc+0xa0/0xd4
[   67.401464]  el0_svc+0x24/0x34
[   67.404691]  el0_sync_handler+0xcc/0x154
[   67.408819]  el0_sync+0x198/0x1c0
[   67.412315]
[   67.413909] Freed by task 2993:
[   67.417220]  kasan_save_stack+0x28/0x58
[   67.421257]  kasan_set_track+0x28/0x3c
[   67.425204]  kasan_set_free_info+0x28/0x4c
[   67.429513]  ____kasan_slab_free+0x104/0x118
[   67.434001]  __kasan_slab_free+0x18/0x24
[   67.438128]  slab_free_freelist_hook+0x148/0x1f0
[   67.442978]  kfree+0x318/0x440
[   67.446205]  ffs_free_inst+0x164/0x2d8 [usb_f_fs]
[   67.451156]  usb_put_function_instance+0x84/0xa4 [libcomposite]
[   67.457385]  ffs_attr_release+0x18/0x24 [usb_f_fs]
[   67.462428]  config_item_put+0x140/0x1a4 [configfs]
[   67.467570]  configfs_rmdir+0x3fc/0x518 [configfs]
[   67.472626]  vfs_rmdir+0x114/0x234
[   67.476215]  do_rmdir+0x274/0x2b0
[   67.479710]  __arm64_sys_unlinkat+0x94/0xc8
[   67.484108]  invoke_syscall+0xf8/0x25c
[   67.488055]  el0_svc_common.constprop.0+0x150/0x1a0
[   67.493175]  do_el0_svc+0xa0/0xd4
[   67.496671]  el0_svc+0x24/0x34
[   67.499896]  el0_sync_handler+0xcc/0x154
[   67.504024]  el0_sync+0x198/0x1c0
[   67.507520]
[   67.509114] The buggy address belongs to the object at ffff0004c26e9700
[   67.509114]  which belongs to the cache kmalloc-128 of size 128
[   67.522171] The buggy address is located 74 bytes inside of
[   67.522171]  128-byte region [ffff0004c26e9700, ffff0004c26e9780)
[   67.534328] The buggy address belongs to the page:
[   67.539355] page:000000003177a217 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5026e8
[   67.549175] head:000000003177a217 order:1 compound_mapcount:0
[   67.555195] flags: 0x8000000000010200(slab|head|zone=2)
[   67.560687] raw: 8000000000010200 fffffc0013037100 0000000c00000002 ffff0004c0002300
[   67.568791] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[   67.576890] page dumped because: kasan: bad access detected
[   67.582725]
[   67.584318] Memory state around the buggy address:
[   67.589343]  ffff0004c26e9600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   67.596903]  ffff0004c26e9680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   67.604463] >ffff0004c26e9700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   67.612022]                                               ^
[   67.617860]  ffff0004c26e9780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   67.625421]  ffff0004c26e9800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   67.632981] ==================================================================
[   67.640535] Disabling lock debugging due to kernel taint
 File descriptor[   67.646100] Unable to handle kernel paging request at virtual address fabb801d4000018d
 in bad state
[   67.655456] Mem abort info:
[   67.659619]   ESR = 0x96000004
[   67.662801]   EC = 0x25: DABT (current EL), IL = 32 bits
[   67.668225]   SET = 0, FnV = 0
[   67.671375]   EA = 0, S1PTW = 0
[   67.674613] Data abort info:
[   67.677587]   ISV = 0, ISS = 0x00000004
[   67.681522]   CM = 0, WnR = 0
[   67.684588] [fabb801d4000018d] address between user and kernel address ranges
[   67.691849] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   67.697470] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul sha2_ce sha1_ce evdev sata_rcar libata xhci_plat_hcd scsi_mod xhci_hcd rene4
[   67.740467] CPU: 0 PID: 2994 Comm: cat Tainted: G    B             5.13.0-rc4+ #8
[   67.748005] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[   67.754924] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--)
[   67.760974] pc : ffs_data_clear+0x138/0x370 [usb_f_fs]
[   67.766178] lr : ffs_data_clear+0x124/0x370 [usb_f_fs]
[   67.771365] sp : ffff800014767ad0
[   67.774706] x29: ffff800014767ad0 x28: ffff800009cf91c0 x27: ffff0004c54861a0
[   67.781913] x26: ffff0004dc90b288 x25: 1fffe00099ec10f5 x24: 00000000000a801d
[   67.789118] x23: 1fffe00099f6953a x22: dfff800000000000 x21: ffff0004cfb4a9d0
[   67.796322] x20: d5e000ea00000bb1 x19: ffff0004cfb4a800 x18: 0000000000000000
[   67.803526] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   67.810730] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000028ecefa
[   67.817934] x11: ffff7000028ecefa x10: 0720072007200720 x9 : ffff80001132c014
[   67.825137] x8 : ffff8000147677d8 x7 : ffff8000147677d7 x6 : 0000000000000000
[   67.832341] x5 : 0000000000000001 x4 : ffff7000028ecefb x3 : 0000000000000001
[   67.839544] x2 : 0000000000000005 x1 : 1abc001d4000018d x0 : d5e000ea00000c6d
[   67.846748] Call trace:
[   67.849218]  ffs_data_clear+0x138/0x370 [usb_f_fs]
[   67.854058]  ffs_data_reset+0x20/0x304 [usb_f_fs]
[   67.858810]  ffs_data_closed+0x240/0x244 [usb_f_fs]
[   67.863736]  ffs_ep0_release+0x40/0x54 [usb_f_fs]
[   67.868488]  __fput+0x304/0x580
[   67.871665]  ____fput+0x18/0x24
[   67.874837]  task_work_run+0x104/0x180
[   67.878622]  do_notify_resume+0x458/0x14e0
[   67.882754]  work_pending+0xc/0x5f8
[   67.886282] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821)
[   67.892422] ---[ end trace 6d7cedf53d7abbea ]---
Segmentation fault
root@rcar-gen3:~#
==================================================================
Fixes 4b187fceec3c ("usb: gadget: FunctionFS: add devices management code")
Fixes 3262ad824307 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference")
Fixes cdafb6d8b8da ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst")
---
 drivers/usb/gadget/function/f_fs.c | 65 +++++++++++++++---------------
 1 file changed, 32 insertions(+), 33 deletions(-)
drivers/usb/gadget/function/f_fs.c +32 -33
index 3126f5b08bd4..94ccf43368df 100644
@@ -250,8 +250,8 @@ EXPORT_SYMBOL_GPL(ffs_lock);
 static struct ffs_dev *_ffs_find_dev(const char *name);
 static struct ffs_dev *_ffs_alloc_dev(void);
 static void _ffs_free_dev(struct ffs_dev *dev);
-static void *ffs_acquire_dev(const char *dev_name);
-static void ffs_release_dev(struct ffs_data *ffs_data);
+static int ffs_acquire_dev(const char *dev_name, struct ffs_data *ffs_data);
+static void ffs_release_dev(struct ffs_dev *ffs_dev);
 static int ffs_ready(struct ffs_data *ffs);
 static void ffs_closed(struct ffs_data *ffs);
 
@@ -1572,8 +1572,8 @@ unmapped_value:
 static int ffs_fs_get_tree(struct fs_context *fc)
 {
 	struct ffs_sb_fill_data *ctx = fc->fs_private;
-	void *ffs_dev;
 	struct ffs_data	*ffs;
+	int ret;
 
 	ENTER();
 
@@ -1592,13 +1592,12 @@ static int ffs_fs_get_tree(struct fs_context *fc)
 		return -ENOMEM;
 	}
 
-	ffs_dev = ffs_acquire_dev(ffs->dev_name);
-	if (IS_ERR(ffs_dev)) {
+	ret = ffs_acquire_dev(ffs->dev_name, ffs);
+	if (ret) {
 		ffs_data_put(ffs);
-		return PTR_ERR(ffs_dev);
+		return ret;
 	}
 
-	ffs->private_data = ffs_dev;
 	ctx->ffs_data = ffs;
 	return get_tree_nodev(fc, ffs_sb_fill);
 }
@@ -1609,7 +1608,6 @@ static void ffs_fs_free_fc(struct fs_context *fc)
 
 	if (ctx) {
 		if (ctx->ffs_data) {
-			ffs_release_dev(ctx->ffs_data);
 			ffs_data_put(ctx->ffs_data);
 		}
 
@@ -1648,10 +1646,8 @@ ffs_fs_kill_sb(struct super_block *sb)
 	ENTER();
 
 	kill_litter_super(sb);
-	if (sb->s_fs_info) {
-		ffs_release_dev(sb->s_fs_info);
+	if (sb->s_fs_info)
 		ffs_data_closed(sb->s_fs_info);
-	}
 }
 
 static struct file_system_type ffs_fs_type = {
@@ -1721,6 +1717,7 @@ static void ffs_data_put(struct ffs_data *ffs)
 	if (unlikely(refcount_dec_and_test(&ffs->ref))) {
 		pr_info("%s(): freeing\n", __func__);
 		ffs_data_clear(ffs);
+		ffs_release_dev(ffs->private_data);
 		BUG_ON(waitqueue_active(&ffs->ev.waitq) ||
 		       waitqueue_active(&ffs->ep0req_completion.wait) ||
 		       waitqueue_active(&ffs->wait));
@@ -3050,6 +3047,7 @@ static inline struct f_fs_opts *ffs_do_functionfs_bind(struct usb_function *f,
 	struct ffs_function *func = ffs_func_from_usb(f);
 	struct f_fs_opts *ffs_opts =
 		container_of(f->fi, struct f_fs_opts, func_inst);
+	struct ffs_data *ffs_data;
 	int ret;
 
 	ENTER();
@@ -3064,12 +3062,13 @@ static inline struct f_fs_opts *ffs_do_functionfs_bind(struct usb_function *f,
 	if (!ffs_opts->no_configfs)
 		ffs_dev_lock();
 	ret = ffs_opts->dev->desc_ready ? 0 : -ENODEV;
-	func->ffs = ffs_opts->dev->ffs_data;
+	ffs_data = ffs_opts->dev->ffs_data;
 	if (!ffs_opts->no_configfs)
 		ffs_dev_unlock();
 	if (ret)
 		return ERR_PTR(ret);
 
+	func->ffs = ffs_data;
 	func->conf = c;
 	func->gadget = c->cdev->gadget;
 
@@ -3524,6 +3523,7 @@ static void ffs_free_inst(struct usb_function_instance *f)
 	struct f_fs_opts *opts;
 
 	opts = to_f_fs_opts(f);
+	ffs_release_dev(opts->dev);
 	ffs_dev_lock();
 	_ffs_free_dev(opts->dev);
 	ffs_dev_unlock();
@@ -3711,47 +3711,48 @@ static void _ffs_free_dev(struct ffs_dev *dev)
 {
 	list_del(&dev->entry);
 
-	/* Clear the private_data pointer to stop incorrect dev access */
-	if (dev->ffs_data)
-		dev->ffs_data->private_data = NULL;
-
 	kfree(dev);
 	if (list_empty(&ffs_devices))
 		functionfs_cleanup();
 }
 
-static void *ffs_acquire_dev(const char *dev_name)
+static int ffs_acquire_dev(const char *dev_name, struct ffs_data *ffs_data)
 {
+	int ret = 0;
 	struct ffs_dev *ffs_dev;
 
 	ENTER();
 	ffs_dev_lock();
 
 	ffs_dev = _ffs_find_dev(dev_name);
-	if (!ffs_dev)
-		ffs_dev = ERR_PTR(-ENOENT);
-	else if (ffs_dev->mounted)
-		ffs_dev = ERR_PTR(-EBUSY);
-	else if (ffs_dev->ffs_acquire_dev_callback &&
-	    ffs_dev->ffs_acquire_dev_callback(ffs_dev))
-		ffs_dev = ERR_PTR(-ENOENT);
-	else
+	if (!ffs_dev) {
+		ret = -ENOENT;
+	} else if (ffs_dev->mounted) {
+		ret = -EBUSY;
+	} else if (ffs_dev->ffs_acquire_dev_callback &&
+		   ffs_dev->ffs_acquire_dev_callback(ffs_dev)) {
+		ret = -ENOENT;
+	} else {
 		ffs_dev->mounted = true;
+		ffs_dev->ffs_data = ffs_data;
+		ffs_data->private_data = ffs_dev;
+	}
 
 	ffs_dev_unlock();
-	return ffs_dev;
+	return ret;
 }
 
-static void ffs_release_dev(struct ffs_data *ffs_data)
+static void ffs_release_dev(struct ffs_dev *ffs_dev)
 {
-	struct ffs_dev *ffs_dev;
-
 	ENTER();
 	ffs_dev_lock();
 
-	ffs_dev = ffs_data->private_data;
-	if (ffs_dev) {
+	if (ffs_dev && ffs_dev->mounted) {
 		ffs_dev->mounted = false;
+		if (ffs_dev->ffs_data) {
+			ffs_dev->ffs_data->private_data = NULL;
+			ffs_dev->ffs_data = NULL;
+		}
 
 		if (ffs_dev->ffs_release_dev_callback)
 			ffs_dev->ffs_release_dev_callback(ffs_dev);
@@ -3779,7 +3780,6 @@ static int ffs_ready(struct ffs_data *ffs)
 	}
 
 	ffs_obj->desc_ready = true;
-	ffs_obj->ffs_data = ffs;
 
 	if (ffs_obj->ffs_ready_callback) {
 		ret = ffs_obj->ffs_ready_callback(ffs);
@@ -3807,7 +3807,6 @@ static void ffs_closed(struct ffs_data *ffs)
 		goto done;
 
 	ffs_obj->desc_ready = false;
-	ffs_obj->ffs_data = NULL;
 
 	if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags) &&
 	    ffs_obj->ffs_closed_callback)
Signature · 1 line
2.30.2
author maintainer
#305 lore raw

PATCH 305/348 usb: dwc2: Dont reset the core after setting turnaround time

In reply to Greg Kroah-Hartman

From: Clément Lassieur <[email protected]>

[ Upstream commit aafe93516b8567ab5864e1f4cd3eeabc54fb0e5a ]

Every time the hub signals a reset while we (device) are hsotg->connected, dwc2_hsotg_core_init_disconnected() is called, which in turn calls dwc2_hs_phy_init().

GUSBCFG.USBTrdTim is cleared upon Core Soft Reset, so if hsotg->params.phy_utmi_width is 8-bit, the value of GUSBCFG.USBTrdTim (the default one: 0x5, corresponding to 16-bit) is always different from hsotg->params.phy_utmi_width, thus dwc2_core_reset() is called every time (usbcfg != usbcfg_old), which causes 2 issues:

1) The call to dwc2_core_reset() does another reset 300us after the initial Chirp K of the first reset (which should last at least Tuch = 1ms), and messes up the High-speed Detection Handshake: both hub and device drive current into the D+ and D- lines at the same time.

2) GUSBCFG.USBTrdTim is cleared by the second reset, so its value is always the default one (0x5).

Setting GUSBCFG.USBTrdTim after the potential call to dwc2_core_reset() fixes both issues. It is now set even when select_phy is false because the cost of the Core Soft Reset is removed.

Fixes 1e868545f2bb ("usb: dwc2: gadget: Move gadget phy init into core phy init")
---
 drivers/usb/dwc2/core.c | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)
drivers/usb/dwc2/core.c +21 -9
index 78a4925aa118..093980481c4d 100644
@@ -1152,15 +1152,6 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 		usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
 		if (hsotg->params.phy_utmi_width == 16)
 			usbcfg |= GUSBCFG_PHYIF16;
-
-		/* Set turnaround time */
-		if (dwc2_is_device_mode(hsotg)) {
-			usbcfg &= ~GUSBCFG_USBTRDTIM_MASK;
-			if (hsotg->params.phy_utmi_width == 16)
-				usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT;
-			else
-				usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT;
-		}
 		break;
 	default:
 		dev_err(hsotg->dev, "FS PHY selected at HS!\n");
@@ -1182,6 +1173,24 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 	return retval;
 }
 
+static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg)
+{
+	u32 usbcfg;
+
+	if (hsotg->params.phy_type != DWC2_PHY_TYPE_PARAM_UTMI)
+		return;
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+
+	usbcfg &= ~GUSBCFG_USBTRDTIM_MASK;
+	if (hsotg->params.phy_utmi_width == 16)
+		usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT;
+	else
+		usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT;
+
+	dwc2_writel(hsotg, usbcfg, GUSBCFG);
+}
+
 int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 {
 	u32 usbcfg;
@@ -1199,6 +1208,9 @@ int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 		retval = dwc2_hs_phy_init(hsotg, select_phy);
 		if (retval)
 			return retval;
+
+		if (dwc2_is_device_mode(hsotg))
+			dwc2_set_turnaround_time(hsotg);
 	}
 
 	if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
Signature · 1 line
2.30.2
author maintainer
#306 lore raw

PATCH 306/348 eeprom: idt_89hpesx: Put fwnode in matching case during ->probe()

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 3f6ee1c095156a74ab2df605af13020f1ce3e600 ]

device_get_next_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller.

Fixes db15d73e5f0e ("eeprom: idt_89hpesx: Support both ACPI and OF probing")
Cc Huy Duong <[email protected]>
---
 drivers/misc/eeprom/idt_89hpesx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/misc/eeprom/idt_89hpesx.c +1 -0
index 81c70e5bc168..45a61a1f9e98 100644
@@ -1161,6 +1161,7 @@ static void idt_get_fw_data(struct idt_89hpesx_dev *pdev)
 	else /* if (!fwnode_property_read_bool(node, "read-only")) */
 		pdev->eero = false;
 
+	fwnode_handle_put(fwnode);
 	dev_info(dev, "EEPROM of %d bytes found by 0x%x",
 		pdev->eesize, pdev->eeaddr);
 }
Signature · 1 line
2.30.2
author maintainer
#307 lore raw

PATCH 307/348 eeprom: idt_89hpesx: Restore printing the unsupported fwnode name

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit e0db3deea73ba418bf5dc21f5a4e32ca87d16dde ]

When iterating over child firmware nodes restore printing the name of ones that are not supported.

While at it, refactor loop body to clearly show that we stop at the first match.

Fixes db15d73e5f0e ("eeprom: idt_89hpesx: Support both ACPI and OF probing")
Cc Huy Duong <[email protected]>
---
 drivers/misc/eeprom/idt_89hpesx.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/misc/eeprom/idt_89hpesx.c +3 -4
index 45a61a1f9e98..3e4a594c110b 100644
@@ -1126,11 +1126,10 @@ static void idt_get_fw_data(struct idt_89hpesx_dev *pdev)
 
 	device_for_each_child_node(dev, fwnode) {
 		ee_id = idt_ee_match_id(fwnode);
-		if (!ee_id) {
-			dev_warn(dev, "Skip unsupported EEPROM device");
-			continue;
-		} else
+		if (ee_id)
 			break;
+
+		dev_warn(dev, "Skip unsupported EEPROM device %pfw\n", fwnode);
 	}
 
 	/* If there is no fwnode EEPROM device, then set zero size */
Signature · 1 line
2.30.2
author maintainer
#308 lore raw

PATCH 308/348 iio: at91-sama5d2_adc: remove usage of iio_priv_to_dev() helper

In reply to Greg Kroah-Hartman

From: Alexandru Ardelean <[email protected]>

[ Upstream commit ebf35aad0baa05823df31fda42df4b67f72e6e72 ]

We may want to get rid of the iio_priv_to_dev() helper. The reason is that we will hide some of the members of the iio_dev structure (to prevent drivers from accessing them directly), and that will also mean hiding the implementation of the iio_priv_to_dev() helper inside the IIO core.

Hiding the implementation of iio_priv_to_dev() implies that some fast-paths may not be fast anymore, so a general idea is to try to get rid of the iio_priv_to_dev() altogether.
The iio_priv() helper won't be affected by the rework, as the iio_dev struct will keep a reference to the private information.

For this driver, not using iio_priv_to_dev(), means reworking some paths to pass the iio device and using iio_priv() to access the private information, and also keeping a reference to the iio device for some quirky paths.

One [quirky] path is the at91_adc_workq_handler() which requires the IIO device & the state struct to push to buffers.
Since this requires the back-ref to the IIO device, the at91_adc_touch_pos() also uses it. This simplifies the patch a bit. The information required in this function is mostly for debugging purposes. Replacing it with a reference to the IIO device would have been a slightly bigger change, which may not be worth it (for just the debugging purpose and given that we need the back-ref to the IIO device anyway).

---
 drivers/iio/adc/at91-sama5d2_adc.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)
drivers/iio/adc/at91-sama5d2_adc.c +17 -13
index 2c01963a6a5c..bafb9dded0ea 100644
@@ -399,6 +399,7 @@ struct at91_adc_state {
 	wait_queue_head_t		wq_data_available;
 	struct at91_adc_dma		dma_st;
 	struct at91_adc_touch		touch_st;
+	struct iio_dev			*indio_dev;
 	u16				buffer[AT91_BUFFER_MAX_HWORDS];
 	/*
 	 * lock to prevent concurrent 'single conversion' requests through
@@ -624,13 +625,13 @@ static u16 at91_adc_touch_pos(struct at91_adc_state *st, int reg)
 	/* first half of register is the x or y, second half is the scale */
 	val = at91_adc_readl(st, reg);
 	if (!val)
-		dev_dbg(&iio_priv_to_dev(st)->dev, "pos is 0\n");
+		dev_dbg(&st->indio_dev->dev, "pos is 0\n");
 
 	pos = val & AT91_SAMA5D2_XYZ_MASK;
 	result = (pos << AT91_SAMA5D2_MAX_POS_BITS) - pos;
 	scale = (val >> 16) & AT91_SAMA5D2_XYZ_MASK;
 	if (scale == 0) {
-		dev_err(&iio_priv_to_dev(st)->dev, "scale is 0\n");
+		dev_err(&st->indio_dev->dev, "scale is 0\n");
 		return 0;
 	}
 	result /= scale;
@@ -1154,9 +1155,9 @@ static unsigned at91_adc_startup_time(unsigned startup_time_min,
 	return i;
 }
 
-static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
+static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq)
 {
-	struct iio_dev *indio_dev = iio_priv_to_dev(st);
+	struct at91_adc_state *st = iio_priv(indio_dev);
 	unsigned f_per, prescal, startup, mr;
 
 	f_per = clk_get_rate(st->per_clk);
@@ -1225,9 +1226,9 @@ static void at91_adc_pen_detect_interrupt(struct at91_adc_state *st)
 	st->touch_st.touching = true;
 }
 
-static void at91_adc_no_pen_detect_interrupt(struct at91_adc_state *st)
+static void at91_adc_no_pen_detect_interrupt(struct iio_dev *indio_dev)
 {
-	struct iio_dev *indio_dev = iio_priv_to_dev(st);
+	struct at91_adc_state *st = iio_priv(indio_dev);
 
 	at91_adc_writel(st, AT91_SAMA5D2_TRGR,
 			AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER);
@@ -1247,7 +1248,7 @@ static void at91_adc_workq_handler(struct work_struct *workq)
 					struct at91_adc_touch, workq);
 	struct at91_adc_state *st = container_of(touch_st,
 					struct at91_adc_state, touch_st);
-	struct iio_dev *indio_dev = iio_priv_to_dev(st);
+	struct iio_dev *indio_dev = st->indio_dev;
 
 	iio_push_to_buffers(indio_dev, st->buffer);
 }
@@ -1268,7 +1269,7 @@ static irqreturn_t at91_adc_interrupt(int irq, void *private)
 		at91_adc_pen_detect_interrupt(st);
 	} else if ((status & AT91_SAMA5D2_IER_NOPEN)) {
 		/* nopen detected IRQ */
-		at91_adc_no_pen_detect_interrupt(st);
+		at91_adc_no_pen_detect_interrupt(indio);
 	} else if ((status & AT91_SAMA5D2_ISR_PENS) &&
 		   ((status & rdy_mask) == rdy_mask)) {
 		/* periodic trigger IRQ - during pen sense */
@@ -1435,7 +1436,7 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
 		    val > st->soc_info.max_sample_rate)
 			return -EINVAL;
 
-		at91_adc_setup_samp_freq(st, val);
+		at91_adc_setup_samp_freq(indio_dev, val);
 		return 0;
 	default:
 		return -EINVAL;
@@ -1573,8 +1574,10 @@ static int at91_adc_update_scan_mode(struct iio_dev *indio_dev,
 	return 0;
 }
 
-static void at91_adc_hw_init(struct at91_adc_state *st)
+static void at91_adc_hw_init(struct iio_dev *indio_dev)
 {
+	struct at91_adc_state *st = iio_priv(indio_dev);
+
 	at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
 	at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
 	/*
@@ -1584,7 +1587,7 @@ static void at91_adc_hw_init(struct at91_adc_state *st)
 	at91_adc_writel(st, AT91_SAMA5D2_MR,
 			AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
 
-	at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
+	at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate);
 
 	/* configure extended mode register */
 	at91_adc_config_emr(st);
@@ -1667,6 +1670,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels);
 
 	st = iio_priv(indio_dev);
+	st->indio_dev = indio_dev;
 
 	bitmap_set(&st->touch_st.channels_bitmask,
 		   AT91_SAMA5D2_TOUCH_X_CHAN_IDX, 1);
@@ -1778,7 +1782,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 		goto vref_disable;
 	}
 
-	at91_adc_hw_init(st);
+	at91_adc_hw_init(indio_dev);
 
 	ret = clk_prepare_enable(st->per_clk);
 	if (ret)
@@ -1894,7 +1898,7 @@ static __maybe_unused int at91_adc_resume(struct device *dev)
 	if (ret)
 		goto vref_disable_resume;
 
-	at91_adc_hw_init(st);
+	at91_adc_hw_init(indio_dev);
 
 	/* reconfiguring trigger hardware state */
 	if (!iio_buffer_enabled(indio_dev))
Signature · 1 line
2.30.2
author maintainer
#309 lore raw

PATCH 309/348 iio: adc: at91-sama5d2: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 8f884758966259fa8c50c137ac6d4ce9bb7859db ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Cc Eugen Hristev <[email protected]>
---
 drivers/iio/adc/at91-sama5d2_adc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/adc/at91-sama5d2_adc.c +2 -1
index bafb9dded0ea..def4abeb47ca 100644
@@ -400,7 +400,8 @@ struct at91_adc_state {
 	struct at91_adc_dma		dma_st;
 	struct at91_adc_touch		touch_st;
 	struct iio_dev			*indio_dev;
-	u16				buffer[AT91_BUFFER_MAX_HWORDS];
+	/* Ensure naturally aligned timestamp */
+	u16				buffer[AT91_BUFFER_MAX_HWORDS] __aligned(8);
 	/*
 	 * lock to prevent concurrent 'single conversion' requests through
 	 * sysfs.
Signature · 1 line
2.30.2
author maintainer
#310 lore raw

PATCH 310/348 iio: adc: hx711: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit afe2a789fbf7acd1a05407fc7839cc08d23825e3 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes d3bf60450d47 ("iio: hx711: add triggered buffer support")
Cc Andreas Klinger <[email protected]>
---
 drivers/iio/adc/hx711.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/adc/hx711.c +2 -2
index 62e6c8badd22..a3265166fd83 100644
@@ -85,9 +85,9 @@ struct hx711_data {
 	struct mutex		lock;
 	/*
 	 * triggered buffer
-	 * 2x32-bit channel + 64-bit timestamp
+	 * 2x32-bit channel + 64-bit naturally aligned timestamp
 	 */
-	u32			buffer[4];
+	u32			buffer[4] __aligned(8);
 	/*
 	 * delay after a rising edge on SCK until the data is ready DOUT
 	 * this is dependent on the hx711 where the datasheet tells a
Signature · 1 line
2.30.2
author maintainer
#311 lore raw

PATCH 311/348 iio: adc: mxs-lradc: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 6a6be221b8bd561b053f0701ec752a5ed9007f69 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.
Add a comment on why the buffer is the size it is as not immediately obvious.

Found during an audit of all calls of this function.

Fixes 6dd112b9f85e ("iio: adc: mxs-lradc: Add support for ADC driver")
Cc Andreas Klinger <[email protected]>
---
 drivers/iio/adc/mxs-lradc-adc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/adc/mxs-lradc-adc.c +2 -1
index 9d2f74c2489a..01f85bbe6a2e 100644
@@ -115,7 +115,8 @@ struct mxs_lradc_adc {
 	struct device		*dev;
 
 	void __iomem		*base;
-	u32			buffer[10];
+	/* Maximum of 8 channels + 8 byte ts */
+	u32			buffer[10] __aligned(8);
 	struct iio_trigger	*trig;
 	struct completion	completion;
 	spinlock_t		lock;
Signature · 1 line
2.30.2
author maintainer
#312 lore raw

PATCH 312/348 iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 61fa5dfa5f52806f5ce37a0ba5712c271eb22f98 ]

Add __aligned(8) to ensure the buffer passed to iio_push_to_buffers_with_timestamp() is suitable for the naturally aligned timestamp that will be inserted.

Fixes f214ff521fb1 ("iio: ti-ads8688: Update buffer allocation for timestamps")
---
 drivers/iio/adc/ti-ads8688.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/adc/ti-ads8688.c +2 -1
index 14fe7c320b52..55a2d619d6dd 100644
@@ -383,7 +383,8 @@ static irqreturn_t ads8688_trigger_handler(int irq, void *p)
 {
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
-	u16 buffer[ADS8688_MAX_CHANNELS + sizeof(s64)/sizeof(u16)];
+	/* Ensure naturally aligned timestamp */
+	u16 buffer[ADS8688_MAX_CHANNELS + sizeof(s64)/sizeof(u16)] __aligned(8);
 	int i, j = 0;
 
 	for (i = 0; i < indio_dev->masklength; i++) {
Signature · 1 line
2.30.2
author maintainer
#313 lore raw

PATCH 313/348 iio: magn: rm3100: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit b8f939fd20690623cb24845a563e7bc1e4a21482 ]

Add __aligned(8) to ensure the buffer passed to iio_push_to_buffers_with_timestamp() is suitable for the naturally aligned timestamp that will be inserted.

Here an explicit structure is not used, because this buffer is used in a non-trivial way for data repacking.

Fixes 121354b2eceb ("iio: magnetometer: Add driver support for PNI RM3100")
Cc Song Qiang <[email protected]>
---
 drivers/iio/magnetometer/rm3100-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/magnetometer/rm3100-core.c +2 -1
index 7c20918d8108..f31ff225fe61 100644
@@ -76,7 +76,8 @@ struct rm3100_data {
 	bool use_interrupt;
 	int conversion_time;
 	int scale;
-	u8 buffer[RM3100_SCAN_BYTES];
+	/* Ensure naturally aligned timestamp */
+	u8 buffer[RM3100_SCAN_BYTES] __aligned(8);
 	struct iio_trigger *drdy_trig;
 
 	/*
Signature · 1 line
2.30.2
author maintainer
#314 lore raw

PATCH 314/348 staging: gdm724x: check for buffer overflow in gdm_lte_multi_sdu_pkt()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 4a36e160856db8a8ddd6a3d2e5db5a850ab87f82 ]

There needs to be a check to verify that we don't read beyond the end of "buf". This function is called from do_rx(). The "buf" is the USB transfer_buffer and "len" is "urb->actual_length".

Fixes 61e121047645 ("staging: gdm7240: adding LTE USB driver")
---
 drivers/staging/gdm724x/gdm_lte.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/staging/gdm724x/gdm_lte.c +9 -1
index db11498f6fc7..182a77de2d04 100644
@@ -677,6 +677,7 @@ static void gdm_lte_multi_sdu_pkt(struct phy_dev *phy_dev, char *buf, int len)
 	struct sdu *sdu = NULL;
 	u8 endian = phy_dev->get_endian(phy_dev->priv_dev);
 	u8 *data = (u8 *)multi_sdu->data;
+	int copied;
 	u16 i = 0;
 	u16 num_packet;
 	u16 hci_len;
@@ -688,6 +689,12 @@ static void gdm_lte_multi_sdu_pkt(struct phy_dev *phy_dev, char *buf, int len)
 	num_packet = gdm_dev16_to_cpu(endian, multi_sdu->num_packet);
 
 	for (i = 0; i < num_packet; i++) {
+		copied = data - multi_sdu->data;
+		if (len < copied + sizeof(*sdu)) {
+			pr_err("rx prevent buffer overflow");
+			return;
+		}
+
 		sdu = (struct sdu *)data;
 
 		cmd_evt  = gdm_dev16_to_cpu(endian, sdu->cmd_evt);
@@ -698,7 +705,8 @@ static void gdm_lte_multi_sdu_pkt(struct phy_dev *phy_dev, char *buf, int len)
 			pr_err("rx sdu wrong hci %04x\n", cmd_evt);
 			return;
 		}
-		if (hci_len < 12) {
+		if (hci_len < 12 ||
+		    len < copied + sizeof(*sdu) + (hci_len - 12)) {
 			pr_err("rx sdu invalid len %d\n", hci_len);
 			return;
 		}
Signature · 1 line
2.30.2
author maintainer
#315 lore raw

PATCH 315/348 staging: gdm724x: check for overflow in gdm_lte_netif_rx()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 7002b526f4ff1f6da34356e67085caafa6be383a ]

This code assumes that "len" is at least 62 bytes, but we need a check to prevent a read overflow.

Fixes 61e121047645 ("staging: gdm7240: adding LTE USB driver")
---
 drivers/staging/gdm724x/gdm_lte.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/staging/gdm724x/gdm_lte.c +6 -4
index 182a77de2d04..8093d0608638 100644
@@ -611,10 +611,12 @@ static void gdm_lte_netif_rx(struct net_device *dev, char *buf,
 						  * bytes (99,130,83,99 dec)
 						  */
 			} __packed;
-			void *addr = buf + sizeof(struct iphdr) +
-				sizeof(struct udphdr) +
-				offsetof(struct dhcp_packet, chaddr);
-			ether_addr_copy(nic->dest_mac_addr, addr);
+			int offset = sizeof(struct iphdr) +
+				     sizeof(struct udphdr) +
+				     offsetof(struct dhcp_packet, chaddr);
+			if (offset + ETH_ALEN > len)
+				return;
+			ether_addr_copy(nic->dest_mac_addr, buf + offset);
 		}
 	}
 
Signature · 1 line
2.30.2
author maintainer
#316 lore raw

PATCH 316/348 staging: rtl8712: remove redundant check in r871xu_drv_init

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit 69d998f1e552f6e2e7b55f5058ce1ac7a72903f9 ]

padapter->dvobj_init is initialized rigth before
initialization check. There is no need for any
branching here.

---
 drivers/staging/rtl8712/usb_intf.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/staging/rtl8712/usb_intf.c +4 -6
index 2fcd65260f4c..bc421925e84c 100644
@@ -380,13 +380,11 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf,
 	/* step 3.
 	 * initialize the dvobj_priv
 	 */
-	if (!padapter->dvobj_init) {
+
+	status = padapter->dvobj_init(padapter);
+	if (status != _SUCCESS)
 		goto error;
-	} else {
-		status = padapter->dvobj_init(padapter);
-		if (status != _SUCCESS)
-			goto error;
-	}
+
 	/* step 4. */
 	status = r8712_init_drv_sw(padapter);
 	if (status)
Signature · 1 line
2.30.2
author maintainer
#317 lore raw

PATCH 317/348 staging: rtl8712: fix memory leak in rtl871x_load_fw_cb

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit e02a3b945816a77702a2769a70ef5f9b06e49d54 ]

There is a leak in rtl8712 driver.
The problem was in non-freed adapter data if
firmware load failed.

This leak can be reproduced with this code:
https://syzkaller.appspot.com/text?tag=ReproC&x=16612f02d00000,
Autoload must fail (to not hit memory leak reported by syzkaller)

There are 2 possible ways how rtl871x_load_fw_cb() and r871xu_dev_remove() can be called (in case of fw load error).

1st case:

	r871xu_dev_remove() then rtl871x_load_fw_cb()

	In this case r871xu_dev_remove() will wait for
	completion and then will jump to the end, because
	rtl871x_load_fw_cb() set intfdata to NULL:

	if (pnetdev) {
		struct _adapter *padapter = netdev_priv(pnetdev);

		/* never exit with a firmware callback pending */
		wait_for_completion(&padapter->rtl8712_fw_ready);
		pnetdev = usb_get_intfdata(pusb_intf);
		usb_set_intfdata(pusb_intf, NULL);
		if (!pnetdev)
			goto firmware_load_fail;

		... clean up code here ...
	}

2nd case:
rtl871x_load_fw_cb() then r871xu_dev_remove()

In this case pnetdev (from code snippet above) will be zero (because rtl871x_load_fw_cb() set it to NULL) And clean up code won't be executed again.

So, in all cases we need to free adapted data in rtl871x_load_fw_cb(), because disconnect function cannot take care of it. And there won't be any race conditions, because complete() call happens after setting intfdata to NULL.

In previous patch I moved out free_netdev() from r8712_free_drv_sw() and that's why now it's possible to free adapter data and then call complete.

---
 drivers/staging/rtl8712/hal_init.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/staging/rtl8712/hal_init.c +3 -0
index 42c0a3c947f1..301b99060bc2 100644
@@ -40,7 +40,10 @@ static void rtl871x_load_fw_cb(const struct firmware *firmware, void *context)
 		dev_err(&udev->dev, "r8712u: Firmware request failed\n");
 		usb_put_dev(udev);
 		usb_set_intfdata(usb_intf, NULL);
+		r8712_free_drv_sw(adapter);
+		adapter->dvobj_deinit(adapter);
 		complete(&adapter->rtl8712_fw_ready);
+		free_netdev(adapter->pnetdev);
 		return;
 	}
 	adapter->fw = firmware;
Signature · 1 line
2.30.2
author maintainer
#318 lore raw

PATCH 318/348 staging: mt7621-dts: fix pci address for PCI memory range

In reply to Greg Kroah-Hartman

From: Sergio Paracuellos <[email protected]>

[ Upstream commit 5b4f167ef3555ec4c334a8dc89c1b44bb2c6bff5 ]

Driver code call 'devm_of_pci_get_host_bridge_resources' to get resources and properly fill 'bridge->windows' and 'bridge->dma_ranges'. After parsing the ranges and store as resources, at the end it makes a call to pci function 'pci_add_resource_offset' to set the offset for the memory resource. To calculate offset, resource start address subtracts pci address of the range. MT7621 does not need any offset for the memory resource. Moreover, setting an offset got into 'WARN_ON' calls from pci devices driver code. Until now memory range pci_addr was being '0x00000000' and res->start is '0x60000000' but becase pci controller driver was manually setting resources and adding them using pci function 'pci_add_resource' where a zero is passed as offset, things was properly working. Since PCI_IOBASE is defined now for ralink we don't set nothing manually anymore so we have to properly fix PCI address for this range to make things work and the new pci address must be set to '0x60000000'. Doing in this way the subtract result obtain zero as offset and pci device driver code properly works.

---
 drivers/staging/mt7621-dts/mt7621.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/mt7621-dts/mt7621.dtsi +1 -1
index a4c08110094b..5ca8607c5dbb 100644
@@ -520,7 +520,7 @@
 
 		bus-range = <0 255>;
 		ranges = <
-			0x02000000 0 0x00000000 0x60000000 0 0x10000000 /* pci memory */
+			0x02000000 0 0x60000000 0x60000000 0 0x10000000 /* pci memory */
 			0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
 		>;
 
Signature · 1 line
2.30.2
author maintainer
#319 lore raw

PATCH 319/348 serial: 8250: Actually allow UPF_MAGIC_MULTIPLIER baud rates

In reply to Greg Kroah-Hartman

From: Maciej W. Rozycki <[email protected]>

[ Upstream commit 78bcae8616ac277d6cb7f38e211493948ed73e30 ]

Support for magic baud rate divisors of 32770 and 32769 used with SMSC Super I/O chips for extra baud rates of 230400 and 460800 respectively where base rate is 115200[1] has been added around Linux 2.5.64, which predates our repo history, but the origin could be identified as commit 2a717aad772f ("Merge with Linux 2.5.64.") with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>.

Code that is now in serial8250_do_get_divisor' was added back then to serial8250_get_divisor', but that code would only ever trigger if one of the higher baud rates was actually requested, and that cannot ever happen, because the earlier call to serial8250_get_baud_rate' never returns them. This is because it calls uart_get_baud_rate' with the maximum requested being the base rate, that is clk/16 or 115200 for SMSC chips at their nominal clock rate.

Fix it then and allow UPF_MAGIC_MULTIPLIER baud rates to be selected, by requesting the maximum baud rate of clk/4 rather than clk/16 if the flag has been set. Also correct the minimum baud rate, observing that these ports only support actual (non-magic) divisors of up to 32767 only.

[1] "FDC37M81x, PC98/99 Compliant Enhanced Super I/O Controller with Keyboard/Mouse Wake-Up", Standard Microsystems Corporation, Rev. 03/27/2000, Table 31 - "Baud Rates", p. 77

---
 drivers/tty/serial/8250/8250_port.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)
drivers/tty/serial/8250/8250_port.c +16 -3
index 5b673077639b..6e93aa3623d9 100644
@@ -2557,6 +2557,21 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,
 					     struct ktermios *old)
 {
 	unsigned int tolerance = port->uartclk / 100;
+	unsigned int min;
+	unsigned int max;
+
+	/*
+	 * Handle magic divisors for baud rates above baud_base on SMSC
+	 * Super I/O chips.  Enable custom rates of clk/4 and clk/8, but
+	 * disable divisor values beyond 32767, which are unavailable.
+	 */
+	if (port->flags & UPF_MAGIC_MULTIPLIER) {
+		min = port->uartclk / 16 / UART_DIV_MAX >> 1;
+		max = (port->uartclk + tolerance) / 4;
+	} else {
+		min = port->uartclk / 16 / UART_DIV_MAX;
+		max = (port->uartclk + tolerance) / 16;
+	}
 
 	/*
 	 * Ask the core to calculate the divisor for us.
@@ -2564,9 +2579,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,
 	 * slower than nominal still match standard baud rates without
 	 * causing transmission errors.
 	 */
-	return uart_get_baud_rate(port, termios, old,
-				  port->uartclk / 16 / UART_DIV_MAX,
-				  (port->uartclk + tolerance) / 16);
+	return uart_get_baud_rate(port, termios, old, min, max);
 }
 
 void
Signature · 1 line
2.30.2
author maintainer
#320 lore raw

PATCH 320/348 iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit ec90b52c07c0403a6db60d752484ec08d605ead0 ]

Add __aligned(8) to ensure the buffer passed to iio_push_to_buffers_with_timestamp() is suitable for the naturally aligned timestamp that will be inserted.

Here an explicit structure is not used, because the holes would necessitate the addition of an explict memset(), to avoid a potential kernel data leak, making for a less minimal fix.

Fixes 55707294c4eb ("iio: light: Add support for vishay vcnl4035")
Cc Parthiban Nallathambi <[email protected]>
---
 drivers/iio/light/vcnl4035.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/light/vcnl4035.c +2 -1
index cca4db312bd3..234623ab3817 100644
@@ -102,7 +102,8 @@ static irqreturn_t vcnl4035_trigger_consumer_handler(int irq, void *p)
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct vcnl4035_data *data = iio_priv(indio_dev);
-	u8 buffer[ALIGN(sizeof(u16), sizeof(s64)) + sizeof(s64)];
+	/* Ensure naturally aligned timestamp */
+	u8 buffer[ALIGN(sizeof(u16), sizeof(s64)) + sizeof(s64)]  __aligned(8);
 	int ret;
 
 	ret = regmap_read(data->regmap, VCNL4035_ALS_DATA, (int *)buffer);
Signature · 1 line
2.30.2
author maintainer
#321 lore raw

PATCH 321/348 iio: prox: isl29501: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit 92babc9938ebbf4050f2fba774836f7edc16a570 ]

Add __aligned(8) to ensure the buffer passed to iio_push_to_buffers_with_timestamp() is suitable for the naturally aligned timestamp that will be inserted.

Here an explicit structure is not used, because the holes would necessitate the addition of an explict memset(), to avoid a kernel data leak, making for a less minimal fix.

Fixes 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Cc Mathieu Othacehe <[email protected]>
---
 drivers/iio/proximity/isl29501.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/proximity/isl29501.c +1 -1
index 5ae549075b27..56d6e9f927f4 100644
@@ -938,7 +938,7 @@ static irqreturn_t isl29501_trigger_handler(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct isl29501_private *isl29501 = iio_priv(indio_dev);
 	const unsigned long *active_mask = indio_dev->active_scan_mask;
-	u32 buffer[4] = {}; /* 1x16-bit + ts */
+	u32 buffer[4] __aligned(8) = {}; /* 1x16-bit + naturally aligned ts */
 
 	if (test_bit(ISL29501_DISTANCE_SCAN_INDEX, active_mask))
 		isl29501_register_read(isl29501, REG_DISTANCE, buffer);
Signature · 1 line
2.30.2
author maintainer
#322 lore raw

PATCH 322/348 ASoC: cs42l42: Correct definition of CS42L42_ADC_PDN_MASK

In reply to Greg Kroah-Hartman

From: Richard Fitzgerald <[email protected]>

[ Upstream commit fac165f22ac947b55407cd3a60a2a9824f905235 ]

The definition of CS42L42_ADC_PDN_MASK was incorrectly defined as the HP_PDN bit.

Fixes 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
---
 sound/soc/codecs/cs42l42.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/cs42l42.h +1 -1
index 866d7c873e3c..ca2019732013 100644
@@ -77,7 +77,7 @@
 #define CS42L42_HP_PDN_SHIFT		3
 #define CS42L42_HP_PDN_MASK		(1 << CS42L42_HP_PDN_SHIFT)
 #define CS42L42_ADC_PDN_SHIFT		2
-#define CS42L42_ADC_PDN_MASK		(1 << CS42L42_HP_PDN_SHIFT)
+#define CS42L42_ADC_PDN_MASK		(1 << CS42L42_ADC_PDN_SHIFT)
 #define CS42L42_PDN_ALL_SHIFT		0
 #define CS42L42_PDN_ALL_MASK		(1 << CS42L42_PDN_ALL_SHIFT)
 
Signature · 1 line
2.30.2
author maintainer
#323 lore raw

PATCH 323/348 of: Fix truncation of memory sizes on 32-bit platforms

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 2892d8a00d23d511a0591ac4b2ff3f050ae1f004 ]

Variable "size" has type "phys_addr_t", which can be either 32-bit or 64-bit on 32-bit systems, while "unsigned long" is always 32-bit on 32-bit systems. Hence the cast in

(unsigned long)size / SZ_1M

may truncate a 64-bit size to 32-bit, as casts have a higher operator precedence than divisions.

Fix this by inverting the order of the cast and division, which should be safe for memory blocks smaller than 4 PiB. Note that the division is actually a shift, as SZ_1M is a power-of-two constant, hence there is no need to use div_u64().

While at it, use "%lu" to format "unsigned long".

Fixes e8d9d1f5485b52ec ("drivers: of: add initialization code for static reserved memory")
Fixes 3f0c8206644836e4 ("drivers: of: add initialization code for dynamic reserved memory")
---
 drivers/of/fdt.c             | 8 ++++----
 drivers/of/of_reserved_mem.c | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)
drivers/of/fdt.c +4 -4
index 223d617ecfe1..943d2a60bfdf 100644
@@ -501,11 +501,11 @@ static int __init __reserved_mem_reserve_reg(unsigned long node,
 
 		if (size &&
 		    early_init_dt_reserve_memory_arch(base, size, nomap) == 0)
-			pr_debug("Reserved memory: reserved region for node '%s': base %pa, size %ld MiB\n",
-				uname, &base, (unsigned long)size / SZ_1M);
+			pr_debug("Reserved memory: reserved region for node '%s': base %pa, size %lu MiB\n",
+				uname, &base, (unsigned long)(size / SZ_1M));
 		else
-			pr_info("Reserved memory: failed to reserve memory for node '%s': base %pa, size %ld MiB\n",
-				uname, &base, (unsigned long)size / SZ_1M);
+			pr_info("Reserved memory: failed to reserve memory for node '%s': base %pa, size %lu MiB\n",
+				uname, &base, (unsigned long)(size / SZ_1M));
 
 		len -= t_len;
 		if (first) {
drivers/of/of_reserved_mem.c +4 -4
index 3fb5d8caffd5..6ed3ffd0a629 100644
@@ -134,9 +134,9 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
 			ret = early_init_dt_alloc_reserved_memory_arch(size,
 					align, start, end, nomap, &base);
 			if (ret == 0) {
-				pr_debug("allocated memory for '%s' node: base %pa, size %ld MiB\n",
+				pr_debug("allocated memory for '%s' node: base %pa, size %lu MiB\n",
 					uname, &base,
-					(unsigned long)size / SZ_1M);
+					(unsigned long)(size / SZ_1M));
 				break;
 			}
 			len -= t_len;
@@ -146,8 +146,8 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
 		ret = early_init_dt_alloc_reserved_memory_arch(size, align,
 							0, 0, nomap, &base);
 		if (ret == 0)
-			pr_debug("allocated memory for '%s' node: base %pa, size %ld MiB\n",
-				uname, &base, (unsigned long)size / SZ_1M);
+			pr_debug("allocated memory for '%s' node: base %pa, size %lu MiB\n",
+				uname, &base, (unsigned long)(size / SZ_1M));
 	}
 
 	if (base == 0) {
Signature · 1 line
2.30.2
author maintainer
#324 lore raw

PATCH 324/348 mtd: rawnand: marvell: add missing clk_disable_unprepare() on error in marvell_nfc_resume()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit ae94c49527aa9bd3b563349adc4b5617747ca6bd ]

Add clk_disable_unprepare() on error path in marvell_nfc_resume().

Fixes bd9c3f9b3c00 ("mtd: rawnand: marvell: add suspend and resume hooks")
---
 drivers/mtd/nand/raw/marvell_nand.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mtd/nand/raw/marvell_nand.c +3 -1
index ee4afa17d8a3..ef163ff1edf7 100644
@@ -2980,8 +2980,10 @@ static int __maybe_unused marvell_nfc_resume(struct device *dev)
 		return ret;
 
 	ret = clk_prepare_enable(nfc->reg_clk);
-	if (ret < 0)
+	if (ret < 0) {
+		clk_disable_unprepare(nfc->core_clk);
 		return ret;
+	}
 
 	/*
 	 * Reset nfc->selected_chip so the next command will cause the timing
Signature · 1 line
2.30.2
author maintainer
#325 lore raw

PATCH 325/348 scsi: mpt3sas: Fix error return value in _scsih_expander_add()

In reply to Greg Kroah-Hartman

From: Zhen Lei <[email protected]>

[ Upstream commit d6c2ce435ffe23ef7f395ae76ec747414589db46 ]

When an expander does not contain any 'phys', an appropriate error code -1 should be returned, as done elsewhere in this function. However, we currently do not explicitly assign this error code to 'rc'. As a result, 0 was incorrectly returned.

Fixes f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/mpt3sas/mpt3sas_scsih.c +3 -1
index aff630fccb07..3654cfc4376f 100644
@@ -5728,8 +5728,10 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 		 handle, parent_handle,
 		 (u64)sas_expander->sas_address, sas_expander->num_phys);
 
-	if (!sas_expander->num_phys)
+	if (!sas_expander->num_phys) {
+		rc = -1;
 		goto out_fail;
+	}
 	sas_expander->phy = kcalloc(sas_expander->num_phys,
 	    sizeof(struct _sas_phy), GFP_KERNEL);
 	if (!sas_expander->phy) {
Signature · 1 line
2.30.2
author maintainer
#326 lore raw

PATCH 326/348 soundwire: stream: Fix test for DP prepare complete

In reply to Greg Kroah-Hartman

From: Richard Fitzgerald <[email protected]>

[ Upstream commit 3d3e88e336338834086278236d42039f3cde50e1 ]

In sdw_prep_deprep_slave_ports(), after the wait_for_completion() the DP prepare status register is read. If this indicates that the port is now prepared, the code should continue with the port setup. It is irrelevant whether the wait_for_completion() timed out if the port is now ready.

The previous implementation would always fail if the wait_for_completion() timed out, even if the port was reporting successful prepare.

This patch also fixes a minor bug where the return from sdw_read() was not checked for error - any error code with LSBits clear could be misinterpreted as a successful port prepare.

---
 drivers/soundwire/stream.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/soundwire/stream.c +6 -7
index 23accfedbf4d..f7ca1f7a68f0 100644
@@ -420,7 +420,6 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 	struct completion *port_ready;
 	struct sdw_dpn_prop *dpn_prop;
 	struct sdw_prepare_ch prep_ch;
-	unsigned int time_left;
 	bool intr = false;
 	int ret = 0, val;
 	u32 addr;
@@ -477,15 +476,15 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 
 		/* Wait for completion on port ready */
 		port_ready = &s_rt->slave->port_ready[prep_ch.num];
-		time_left = wait_for_completion_timeout(port_ready,
-				msecs_to_jiffies(dpn_prop->ch_prep_timeout));
+		wait_for_completion_timeout(port_ready,
+			msecs_to_jiffies(dpn_prop->ch_prep_timeout));
 
 		val = sdw_read(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
-		val &= p_rt->ch_mask;
-		if (!time_left || val) {
+		if ((val < 0) || (val & p_rt->ch_mask)) {
+			ret = (val < 0) ? val : -ETIMEDOUT;
 			dev_err(&s_rt->slave->dev,
-				"Chn prep failed for port:%d\n", prep_ch.num);
-			return -ETIMEDOUT;
+				"Chn prep failed for port %d: %d\n", prep_ch.num, ret);
+			return ret;
 		}
 	}
 
Signature · 1 line
2.30.2
author maintainer
#327 lore raw

PATCH 327/348 phy: uniphier-pcie: Fix updating phy parameters

In reply to Greg Kroah-Hartman

From: Kunihiko Hayashi <[email protected]>

[ Upstream commit 4a90bbb478dbf18ecdec9dcf8eb708e319d24264 ]

The current driver uses a value from register TEST_O as the original value for register TEST_I, though, the value is overwritten by "param", so there is a bug that the original value isn't no longer used.

The value of TEST_O[7:0] should be masked with "mask", replaced with "param", and placed in the bitfield TESTI_DAT_MASK as new TEST_I value.

Fixes c6d9b1324159 ("phy: socionext: add PCIe PHY driver support")
---
 drivers/phy/socionext/phy-uniphier-pcie.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/phy/socionext/phy-uniphier-pcie.c +7 -4
index 93ffbd2940fa..0bad0e01279a 100644
@@ -20,11 +20,13 @@
 
 /* PHY */
 #define PCL_PHY_TEST_I		0x2000
-#define PCL_PHY_TEST_O		0x2004
 #define TESTI_DAT_MASK		GENMASK(13, 6)
 #define TESTI_ADR_MASK		GENMASK(5, 1)
 #define TESTI_WR_EN		BIT(0)
 
+#define PCL_PHY_TEST_O		0x2004
+#define TESTO_DAT_MASK		GENMASK(7, 0)
+
 #define PCL_PHY_RESET		0x200c
 #define PCL_PHY_RESET_N_MNMODE	BIT(8)	/* =1:manual */
 #define PCL_PHY_RESET_N		BIT(0)	/* =1:deasssert */
@@ -72,11 +74,12 @@ static void uniphier_pciephy_set_param(struct uniphier_pciephy_priv *priv,
 	val  = FIELD_PREP(TESTI_DAT_MASK, 1);
 	val |= FIELD_PREP(TESTI_ADR_MASK, reg);
 	uniphier_pciephy_testio_write(priv, val);
-	val = readl(priv->base + PCL_PHY_TEST_O);
+	val = readl(priv->base + PCL_PHY_TEST_O) & TESTO_DAT_MASK;
 
 	/* update value */
-	val &= ~FIELD_PREP(TESTI_DAT_MASK, mask);
-	val  = FIELD_PREP(TESTI_DAT_MASK, mask & param);
+	val &= ~mask;
+	val |= mask & param;
+	val = FIELD_PREP(TESTI_DAT_MASK, val);
 	val |= FIELD_PREP(TESTI_ADR_MASK, reg);
 	uniphier_pciephy_testio_write(priv, val);
 	uniphier_pciephy_testio_write(priv, val | TESTI_WR_EN);
Signature · 1 line
2.30.2
author maintainer
#328 lore raw

PATCH 328/348 phy: ti: dm816x: Fix the error handling path in dm816x_usb_phy_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit f7eedcb8539ddcbb6fe7791f1b4ccf43f905c72f ]

Add an error handling path in the probe to release some resources, as already done in the remove function.

---
 drivers/phy/ti/phy-dm816x-usb.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)
drivers/phy/ti/phy-dm816x-usb.c +13 -4
index cbcce7cf0028..2ed5fe20d779 100644
@@ -246,19 +246,28 @@ static int dm816x_usb_phy_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(phy->dev);
 	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
-	if (IS_ERR(generic_phy))
-		return PTR_ERR(generic_phy);
+	if (IS_ERR(generic_phy)) {
+		error = PTR_ERR(generic_phy);
+		goto clk_unprepare;
+	}
 
 	phy_set_drvdata(generic_phy, phy);
 
 	phy_provider = devm_of_phy_provider_register(phy->dev,
 						     of_phy_simple_xlate);
-	if (IS_ERR(phy_provider))
-		return PTR_ERR(phy_provider);
+	if (IS_ERR(phy_provider)) {
+		error = PTR_ERR(phy_provider);
+		goto clk_unprepare;
+	}
 
 	usb_add_phy_dev(&phy->phy);
 
 	return 0;
+
+clk_unprepare:
+	pm_runtime_disable(phy->dev);
+	clk_unprepare(phy->refclk);
+	return error;
 }
 
 static int dm816x_usb_phy_remove(struct platform_device *pdev)
Signature · 1 line
2.30.2
author maintainer
#329 lore raw

PATCH 329/348 extcon: sm5502: Drop invalid register write in sm5502_reg_data

In reply to Greg Kroah-Hartman

From: Stephan Gerhold <[email protected]>

[ Upstream commit d25b224f8e5507879b36a769a6d1324cf163466c ]

When sm5502_init_dev_type() iterates over sm5502_reg_data to initialize the registers it is limited by ARRAY_SIZE(sm5502_reg_data). There is no need to add another empty element to sm5502_reg_data.

Having the additional empty element in sm5502_reg_data will just result in writing 0xff to register 0x00, which does not really make sense.

Fixes 914b881f9452 ("extcon: sm5502: Add support new SM5502 extcon device driver")
---
 drivers/extcon/extcon-sm5502.c | 1 -
 1 file changed, 1 deletion(-)
drivers/extcon/extcon-sm5502.c +0 -1
index b3d93baf4fc5..f883992800b3 100644
@@ -88,7 +88,6 @@ static struct reg_data sm5502_reg_data[] = {
 			| SM5502_REG_INTM2_MHL_MASK,
 		.invert = true,
 	},
-	{ }
 };
 
 /* List of detectable cables */
Signature · 1 line
2.30.2
author maintainer
#330 lore raw

PATCH 330/348 extcon: max8997: Add missing modalias string

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit dc11fc2991e9efbceef93912b83e333d2835fb19 ]

The platform device driver name is "max8997-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module.

Fixes b76668ba8a77 ("Extcon: add MAX8997 extcon driver")
---
 drivers/extcon/extcon-max8997.c | 1 +
 1 file changed, 1 insertion(+)
drivers/extcon/extcon-max8997.c +1 -0
index ac1633adb55d..cac36ef59e45 100644
@@ -784,3 +784,4 @@ module_platform_driver(max8997_muic_driver);
 MODULE_DESCRIPTION("Maxim MAX8997 Extcon driver");
 MODULE_AUTHOR("Donggeun Kim <[email protected]>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:max8997-muic");
Signature · 1 line
2.30.2
author maintainer
#331 lore raw

PATCH 331/348 ASoC: atmel-i2s: Fix usage of capture and playback at the same time

In reply to Greg Kroah-Hartman

From: Codrin Ciubotariu <[email protected]>

[ Upstream commit 3b7961a326f8a7e03f54a19f02fedae8d488b80f ]

For both capture and playback streams to work at the same time, only the needed values from a register need to be updated. Also, clocks should be enabled only when the first stream is started and stopped when there is no running stream.

Fixes b543e467d1a9 ("ASoC: atmel-i2s: add driver for the new Atmel I2S controller")
---
 sound/soc/atmel/atmel-i2s.c | 34 ++++++++++++++++++++++++++--------
 1 file changed, 26 insertions(+), 8 deletions(-)
sound/soc/atmel/atmel-i2s.c +26 -8
index bbe2b638abb5..d870f56c44cf 100644
@@ -200,6 +200,7 @@ struct atmel_i2s_dev {
 	unsigned int				fmt;
 	const struct atmel_i2s_gck_param	*gck_param;
 	const struct atmel_i2s_caps		*caps;
+	int					clk_use_no;
 };
 
 static irqreturn_t atmel_i2s_interrupt(int irq, void *dev_id)
@@ -321,9 +322,16 @@ static int atmel_i2s_hw_params(struct snd_pcm_substream *substream,
 {
 	struct atmel_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
 	bool is_playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
-	unsigned int mr = 0;
+	unsigned int mr = 0, mr_mask;
 	int ret;
 
+	mr_mask = ATMEL_I2SC_MR_FORMAT_MASK | ATMEL_I2SC_MR_MODE_MASK |
+		ATMEL_I2SC_MR_DATALENGTH_MASK;
+	if (is_playback)
+		mr_mask |= ATMEL_I2SC_MR_TXMONO;
+	else
+		mr_mask |= ATMEL_I2SC_MR_RXMONO;
+
 	switch (dev->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
 		mr |= ATMEL_I2SC_MR_FORMAT_I2S;
@@ -402,7 +410,7 @@ static int atmel_i2s_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	return regmap_write(dev->regmap, ATMEL_I2SC_MR, mr);
+	return regmap_update_bits(dev->regmap, ATMEL_I2SC_MR, mr_mask, mr);
 }
 
 static int atmel_i2s_switch_mck_generator(struct atmel_i2s_dev *dev,
@@ -495,18 +503,28 @@ static int atmel_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
 	is_master = (mr & ATMEL_I2SC_MR_MODE_MASK) == ATMEL_I2SC_MR_MODE_MASTER;
 
 	/* If master starts, enable the audio clock. */
-	if (is_master && mck_enabled)
-		err = atmel_i2s_switch_mck_generator(dev, true);
-	if (err)
-		return err;
+	if (is_master && mck_enabled) {
+		if (!dev->clk_use_no) {
+			err = atmel_i2s_switch_mck_generator(dev, true);
+			if (err)
+				return err;
+		}
+		dev->clk_use_no++;
+	}
 
 	err = regmap_write(dev->regmap, ATMEL_I2SC_CR, cr);
 	if (err)
 		return err;
 
 	/* If master stops, disable the audio clock. */
-	if (is_master && !mck_enabled)
-		err = atmel_i2s_switch_mck_generator(dev, false);
+	if (is_master && !mck_enabled) {
+		if (dev->clk_use_no == 1) {
+			err = atmel_i2s_switch_mck_generator(dev, false);
+			if (err)
+				return err;
+		}
+		dev->clk_use_no--;
+	}
 
 	return err;
 }
Signature · 1 line
2.30.2
author maintainer
#332 lore raw

PATCH 332/348 configfs: fix memleak in configfs_release_bin_file

In reply to Greg Kroah-Hartman

From: Chung-Chiang Cheng <[email protected]>

[ Upstream commit 3c252b087de08d3cb32468b54a158bd7ad0ae2f7 ]

When reading binary attributes in progress, buffer->bin_buffer is setup in configfs_read_bin_file() but never freed.

Fixes 03607ace807b4 ("configfs: implement binary attributes")
[hch: move the vfree rather than duplicating it]
---
 fs/configfs/file.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
fs/configfs/file.c +5 -5
index 84b4d58fc65f..66fae1853d99 100644
@@ -482,13 +482,13 @@ static int configfs_release_bin_file(struct inode *inode, struct file *file)
 					buffer->bin_buffer_size);
 		}
 		up_read(&frag->frag_sem);
-		/* vfree on NULL is safe */
-		vfree(buffer->bin_buffer);
-		buffer->bin_buffer = NULL;
-		buffer->bin_buffer_size = 0;
-		buffer->needs_read_fill = 1;
 	}
 
+	vfree(buffer->bin_buffer);
+	buffer->bin_buffer = NULL;
+	buffer->bin_buffer_size = 0;
+	buffer->needs_read_fill = 1;
+
 	configfs_release(inode, file);
 	return 0;
 }
Signature · 1 line
2.30.2
author maintainer
#333 lore raw

PATCH 333/348 leds: as3645a: Fix error return code in as3645a_parse_node()

In reply to Greg Kroah-Hartman

From: Zhen Lei <[email protected]>

[ Upstream commit 96a30960a2c5246c8ffebe8a3c9031f9df094d97 ]

Return error code -ENODEV rather than '0' when the indicator node can not be found.

Fixes a56ba8fbcb55 ("media: leds: as3645a: Add LED flash class driver")
---
 drivers/leds/leds-as3645a.c | 1 +
 1 file changed, 1 insertion(+)
drivers/leds/leds-as3645a.c +1 -0
index b7e0ae1af8fa..1dc6f1b24ddb 100644
@@ -544,6 +544,7 @@ static int as3645a_parse_node(struct as3645a *flash,
 	if (!flash->indicator_node) {
 		dev_warn(&flash->client->dev,
 			 "can't find indicator node\n");
+		rval = -ENODEV;
 		goto out_err;
 	}
 
Signature · 1 line
2.30.2