Skip to contentSkip to conversation

libsepol/cil: Fix handling category sets in an expression

PATCH In review James Carter 2 participants 3 messages Jul 12, 2021 – Jul 13, 2021 SELinux security module

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 libsepol/cil: Fix handling category sets in an expression

There are two problems that need to be addressed when resolving an expression with category sets.

1. Only expand anonymous category sets in an expression.

Commit 982ec302b67f3c7f8df667dadb67352b1e4a6d18 (libsepol/cil:
Account for anonymous category sets in an expression) attempted to properly handle anonymous category sets when resolving category expressions. Unfortunately, it did not check whether a category set was actually an anonymous category set and expanded all category sets in an expression. If a category set refers to itself in the expression, then everything from the name of the category set to the end of the expression is ignored.

For example, the rule "(categoryset cs (c0 cs c1 c2))", would be equivalent to the rule "(categoryset cs (c0))" as everything from "cs" to the end would be dropped. The secilc-fuzzer found that the rule "(categoryset cat (not cat))" would cause a segfault since "(not)" is not a valid expression and it is assumed to be valid during later evaluation because syntax checking has already been done.

Instead, check whether or not the category set is anonymous before expanding it when resolving an expression.

2. Category sets cannot be used in a category range

A category range can be used to specify a large number of categories. The range "(range c0 c1023)" refers to 1024 categories. Only categories and category aliases can be used in a range. Determining if an identifier is a category, an alias, or a set can only be done after resolving the identifer.

Keep track of the current operator as an expression is being resolved and if the expression involves categories and a category set is encountered, then return an error if the expression is a category range.

---
 libsepol/cil/src/cil_resolve_ast.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)
libsepol/cil/src/cil_resolve_ast.c +21 -7
index 145d4e74..18007324 100644
@@ -3228,6 +3228,7 @@ int cil_resolve_expr(enum cil_flavor expr_type, struct cil_list *str_expr, struc
 	struct cil_symtab_datum *res_datum = NULL;
 	enum cil_sym_index sym_index =  CIL_SYM_UNKNOWN;
 	struct cil_list *datum_sub_expr;
+	enum cil_flavor op = CIL_NONE;
 
 	switch (str_expr->flavor) {
 	case CIL_BOOL:
@@ -3263,14 +3264,24 @@ int cil_resolve_expr(enum cil_flavor expr_type, struct cil_list *str_expr, struc
 			}
 			if (sym_index == CIL_SYM_CATS && NODE(res_datum)->flavor == CIL_CATSET) {
 				struct cil_catset *catset = (struct cil_catset *)res_datum;
-				if (!catset->cats->datum_expr) {
-					rc = cil_resolve_expr(expr_type, catset->cats->str_expr, &catset->cats->datum_expr, parent, extra_args);
-					if (rc != SEPOL_OK) {
-						goto exit;
+				if (op == CIL_RANGE) {
+					cil_tree_log(parent, CIL_ERR, "Category set not allowed in category range");
+					rc = SEPOL_ERR;
+					goto exit;
+				}
+				if (!res_datum->name) {
+					/* Anonymous category sets need to be resolved when encountered */
+					if (!catset->cats->datum_expr) {
+						rc = cil_resolve_expr(expr_type, catset->cats->str_expr, &catset->cats->datum_expr, parent, extra_args);
+						if (rc != SEPOL_OK) {
+							goto exit;
+						}
 					}
+					cil_copy_list(catset->cats->datum_expr, &datum_sub_expr);
+					cil_list_append(*datum_expr, CIL_LIST, datum_sub_expr);
+				} else {
+					cil_list_append(*datum_expr, CIL_DATUM, res_datum);
 				}
-				cil_copy_list(catset->cats->datum_expr, &datum_sub_expr);
-				cil_list_append(*datum_expr, CIL_LIST, datum_sub_expr);
 			} else {
 				if (sym_index == CIL_SYM_TYPES && (expr_type == CIL_CONSTRAIN || expr_type == CIL_VALIDATETRANS)) {
 					cil_type_used(res_datum, CIL_ATTR_CONSTRAINT);
@@ -3287,9 +3298,12 @@ int cil_resolve_expr(enum cil_flavor expr_type, struct cil_list *str_expr, struc
 			break;
 		}
 		default:
+			if (curr->flavor == CIL_OP) {
+				op = (enum cil_flavor)(uintptr_t)curr->data;
+			}
 			cil_list_append(*datum_expr, curr->flavor, curr->data);
 			break;
-		}				
+		}
 	}
 	return SEPOL_OK;
 
Signature · 1 line
2.31.1
Acked-by on v2 1/1
#1 lore raw
Quoted 34 lines · James Carter

There are two problems that need to be addressed when resolving an expression with category sets.

1. Only expand anonymous category sets in an expression.

Commit 982ec302b67f3c7f8df667dadb67352b1e4a6d18 (libsepol/cil:
Account for anonymous category sets in an expression) attempted to properly handle anonymous category sets when resolving category expressions. Unfortunately, it did not check whether a category set was actually an anonymous category set and expanded all category sets in an expression. If a category set refers to itself in the expression, then everything from the name of the category set to the end of the expression is ignored.

For example, the rule "(categoryset cs (c0 cs c1 c2))", would be equivalent to the rule "(categoryset cs (c0))" as everything from "cs" to the end would be dropped. The secilc-fuzzer found that the rule "(categoryset cat (not cat))" would cause a segfault since "(not)" is not a valid expression and it is assumed to be valid during later evaluation because syntax checking has already been done.

Instead, check whether or not the category set is anonymous before expanding it when resolving an expression.

2. Category sets cannot be used in a category range

A category range can be used to specify a large number of categories. The range "(range c0 c1023)" refers to 1024 categories. Only categories and category aliases can be used in a range. Determining if an identifier is a category, an alias, or a set can only be done after resolving the identifer.

Quoted 6 lines

Keep track of the current operator as an expression is being resolved and if the expression involves categories and a category set is encountered, then return an error if the expression is a category range.

Thanks!
Nicolas

Quoted 64 lines
---
 libsepol/cil/src/cil_resolve_ast.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)
libsepol/cil/src/cil_resolve_ast.c +21 -8
index 145d4e74..18007324 100644
@@ -3228,6 +3228,7 @@ int cil_resolve_expr(enum cil_flavor expr_type, struct cil_list *str_expr, struc
        struct cil_symtab_datum *res_datum = NULL;
        enum cil_sym_index sym_index =  CIL_SYM_UNKNOWN;
        struct cil_list *datum_sub_expr;
+       enum cil_flavor op = CIL_NONE;
 
        switch (str_expr->flavor) {
        case CIL_BOOL:
@@ -3263,14 +3264,24 @@ int cil_resolve_expr(enum cil_flavor expr_type, struct cil_list *str_expr, struc
                        }
                        if (sym_index == CIL_SYM_CATS && NODE(res_datum)->flavor == CIL_CATSET) {
                                struct cil_catset *catset = (struct cil_catset *)res_datum;
-                               if (!catset->cats->datum_expr) {
-                                       rc = cil_resolve_expr(expr_type, catset->cats->str_expr, &catset->cats->datum_expr, parent, extra_args);
-                                       if (rc != SEPOL_OK) {
-                                               goto exit;
+                               if (op == CIL_RANGE) {
+                                       cil_tree_log(parent, CIL_ERR, "Category set not allowed in category range");
+                                       rc = SEPOL_ERR;
+                                       goto exit;
+                               }
+                               if (!res_datum->name) {
+                                       /* Anonymous category sets need to be resolved when encountered */
+                                       if (!catset->cats->datum_expr) {
+                                               rc = cil_resolve_expr(expr_type, catset->cats->str_expr, &catset->cats->datum_expr, parent, extra_args);
+                                               if (rc != SEPOL_OK) {
+                                                       goto exit;
+                                               }
                                        }
+                                       cil_copy_list(catset->cats->datum_expr, &datum_sub_expr);
+                                       cil_list_append(*datum_expr, CIL_LIST, datum_sub_expr);
+                               } else {
+                                       cil_list_append(*datum_expr, CIL_DATUM, res_datum);
                                }
-                               cil_copy_list(catset->cats->datum_expr, &datum_sub_expr);
-                               cil_list_append(*datum_expr, CIL_LIST, datum_sub_expr);
                        } else {
                                if (sym_index == CIL_SYM_TYPES && (expr_type == CIL_CONSTRAIN || expr_type == CIL_VALIDATETRANS)) {
                                        cil_type_used(res_datum, CIL_ATTR_CONSTRAINT);
@@ -3287,9 +3298,12 @@ int cil_resolve_expr(enum cil_flavor expr_type, struct cil_list *str_expr, struc
                        break;
                }
                default:
+                       if (curr->flavor == CIL_OP) {
+                               op = (enum cil_flavor)(uintptr_t)curr->data;
+                       }
                        cil_list_append(*datum_expr, curr->flavor, curr->data);
                        break;
-               }
+               }
        }
        return SEPOL_OK;
 
--

2.31.1

#2 lore raw
Quoted 41 lines · Nicolas Iooss
Quoted 39 lines · James Carter

There are two problems that need to be addressed when resolving an expression with category sets.

1. Only expand anonymous category sets in an expression.

Commit 982ec302b67f3c7f8df667dadb67352b1e4a6d18 (libsepol/cil:
Account for anonymous category sets in an expression) attempted to properly handle anonymous category sets when resolving category expressions. Unfortunately, it did not check whether a category set was actually an anonymous category set and expanded all category sets in an expression. If a category set refers to itself in the expression, then everything from the name of the category set to the end of the expression is ignored.

For example, the rule "(categoryset cs (c0 cs c1 c2))", would be equivalent to the rule "(categoryset cs (c0))" as everything from "cs" to the end would be dropped. The secilc-fuzzer found that the rule "(categoryset cat (not cat))" would cause a segfault since "(not)" is not a valid expression and it is assumed to be valid during later evaluation because syntax checking has already been done.

Instead, check whether or not the category set is anonymous before expanding it when resolving an expression.

2. Category sets cannot be used in a category range

A category range can be used to specify a large number of categories. The range "(range c0 c1023)" refers to 1024 categories. Only categories and category aliases can be used in a range. Determining if an identifier is a category, an alias, or a set can only be done after resolving the identifer.

Keep track of the current operator as an expression is being resolved and if the expression involves categories and a category set is encountered, then return an error if the expression is a category range.

Quoted 6 lines
Quoted 1 line

Thanks!
Nicolas

Merged.
Thanks!
Nicolas

Quoted 64 lines
Quoted 64 lines
---
 libsepol/cil/src/cil_resolve_ast.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)
libsepol/cil/src/cil_resolve_ast.c +21 -8
index 145d4e74..18007324 100644
@@ -3228,6 +3228,7 @@ int cil_resolve_expr(enum cil_flavor expr_type, struct cil_list *str_expr, struc
        struct cil_symtab_datum *res_datum = NULL;
        enum cil_sym_index sym_index =  CIL_SYM_UNKNOWN;
        struct cil_list *datum_sub_expr;
+       enum cil_flavor op = CIL_NONE;
 
        switch (str_expr->flavor) {
        case CIL_BOOL:
@@ -3263,14 +3264,24 @@ int cil_resolve_expr(enum cil_flavor expr_type, struct cil_list *str_expr, struc
                        }
                        if (sym_index == CIL_SYM_CATS && NODE(res_datum)->flavor == CIL_CATSET) {
                                struct cil_catset *catset = (struct cil_catset *)res_datum;
-                               if (!catset->cats->datum_expr) {
-                                       rc = cil_resolve_expr(expr_type, catset->cats->str_expr, &catset->cats->datum_expr, parent, extra_args);
-                                       if (rc != SEPOL_OK) {
-                                               goto exit;
+                               if (op == CIL_RANGE) {
+                                       cil_tree_log(parent, CIL_ERR, "Category set not allowed in category range");
+                                       rc = SEPOL_ERR;
+                                       goto exit;
+                               }
+                               if (!res_datum->name) {
+                                       /* Anonymous category sets need to be resolved when encountered */
+                                       if (!catset->cats->datum_expr) {
+                                               rc = cil_resolve_expr(expr_type, catset->cats->str_expr, &catset->cats->datum_expr, parent, extra_args);
+                                               if (rc != SEPOL_OK) {
+                                                       goto exit;
+                                               }
                                        }
+                                       cil_copy_list(catset->cats->datum_expr, &datum_sub_expr);
+                                       cil_list_append(*datum_expr, CIL_LIST, datum_sub_expr);
+                               } else {
+                                       cil_list_append(*datum_expr, CIL_DATUM, res_datum);
                                }
-                               cil_copy_list(catset->cats->datum_expr, &datum_sub_expr);
-                               cil_list_append(*datum_expr, CIL_LIST, datum_sub_expr);
                        } else {
                                if (sym_index == CIL_SYM_TYPES && (expr_type == CIL_CONSTRAIN || expr_type == CIL_VALIDATETRANS)) {
                                        cil_type_used(res_datum, CIL_ATTR_CONSTRAINT);
@@ -3287,9 +3298,12 @@ int cil_resolve_expr(enum cil_flavor expr_type, struct cil_list *str_expr, struc
                        break;
                }
                default:
+                       if (curr->flavor == CIL_OP) {
+                               op = (enum cil_flavor)(uintptr_t)curr->data;
+                       }
                        cil_list_append(*datum_expr, curr->flavor, curr->data);
                        break;
-               }
+               }
        }
        return SEPOL_OK;
 
--

2.31.1