writeback: Fix bandwidth estimates
Subsystems (4)
Jan Kara
maintainerv3 cover writeback: Fix bandwidth estimates
Hello,
Here is the third revision of the patch series to fix estimate of writeback throughput when device is not fully busy doing writeback. Michael Stapelberg has reported that such workload (e.g. generated by linking) tends to push estimated throughput down to 0 and as a result writeback on the device is practically stalled.
The first three patches fix the reported issue, the remaining two patches are unrelated cleanups of problems I've noticed when reading the code.
Andrew, can you please pick up the series? Thanks!
Honza
Changes since v2:
* Rebased on top of 5.14-rc1
* Fixed compilation failure introduced by patch 5/5
Changes since v1:
* Added comments to better explain the logic
* Added Tested-by tag
* Added WRITE_ONCE calls matching READ_ONCE in patch 5/5
Previous versions:
Jan Kara
maintainerPATCH v3 1/5 writeback: Track number of inodes under writeback
Track number of inodes under writeback for each bdi_writeback structure. We will use this to decide whether wb does any IO and so we can estimate its writeback throughput. In principle we could use number of pages under writeback (WB_WRITEBACK counter) for this however normal percpu counter reads are too inaccurate for our purposes and summing the counter is too expensive.
--- fs/fs-writeback.c | 5 +++++ include/linux/backing-dev-defs.h | 1 + mm/backing-dev.c | 1 + mm/page-writeback.c | 22 ++++++++++++++++++++-- 4 files changed, 27 insertions(+), 2 deletions(-)
fs/fs-writeback.c +5 -0
@@ -406,6 +406,11 @@ static bool inode_do_switch_wbs(struct inode *inode,inc_wb_stat (new_wb,WB_WRITEBACK ); } +if (mapping_tagged (mapping,PAGECACHE_TAG_WRITEBACK )) { +atomic_dec (&old_wb->writeback_inodes); +atomic_inc (&new_wb->writeback_inodes); + } +wb_get (new_wb);/*
include/linux/backing-dev-defs.h +1 -0
@@ -116,6 +116,7 @@ struct bdi_writeback {struct list_head b_dirty_time;/* time stamps are dirty */ spinlock_t list_lock;/* protects the b_* lists */ +atomic_t writeback_inodes;/* number of inodes under writeback */ struct percpu_counter stat[NR_WB_STAT_ITEMS ];unsigned long congested;/* WB_[a]sync_congested flags */
mm/backing-dev.c +1 -0
@@ -293,6 +293,7 @@ static int wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi,INIT_LIST_HEAD (&wb->b_dirty_time);spin_lock_init (&wb->list_lock); +atomic_set (&wb->writeback_inodes,0 ); wb->bw_time_stamp = jiffies; wb->balanced_dirty_ratelimit =INIT_BW ; wb->dirty_ratelimit =INIT_BW ;
mm/page-writeback.c +20 -2
@@ -2731,6 +2731,16 @@ int clear_page_dirty_for_io(struct page *page) }EXPORT_SYMBOL (clear_page_dirty_for_io); +static void wb_inode_writeback_start (struct bdi_writeback *wb) +{ +atomic_inc (&wb->writeback_inodes); +} + +static void wb_inode_writeback_end (struct bdi_writeback *wb) +{ +atomic_dec (&wb->writeback_inodes); +} +int test_clear_page_writeback (struct page *page) {struct address_space *mapping =page_mapping (page);
@@ -2752,6 +2762,9 @@ int test_clear_page_writeback(struct page *page)dec_wb_stat (wb,WB_WRITEBACK );__wb_writeout_inc (wb); +if (!mapping_tagged (mapping, +PAGECACHE_TAG_WRITEBACK )) +wb_inode_writeback_end (wb); } }
@@ -2794,8 +2807,13 @@ int __test_set_page_writeback(struct page *page, bool keep_write) PAGECACHE_TAG_WRITEBACK);xas_set_mark (&xas,PAGECACHE_TAG_WRITEBACK ); -if (bdi->capabilities &BDI_CAP_WRITEBACK_ACCT ) -inc_wb_stat (inode_to_wb (inode),WB_WRITEBACK ); +if (bdi->capabilities &BDI_CAP_WRITEBACK_ACCT ) { +struct bdi_writeback *wb =inode_to_wb (inode); + +inc_wb_stat (wb,WB_WRITEBACK ); +if (!on_wblist) +wb_inode_writeback_start (wb); + }/* * We can come through here when swapping anonymous
Signature · 1 line
2.26.2
Jan Kara
maintainerPATCH v3 2/5 writeback: Reliably update bandwidth estimation
In reply to Jan KaraCurrently we trigger writeback bandwidth estimation from balance_dirty_pages() and from wb_writeback(). However neither of these need to trigger when the system is relatively idle and writeback is triggered e.g. from fsync(2). Make sure writeback estimates happen reliably by triggering them from do_writepages().
--- fs/fs-writeback.c | 3 --- include/linux/backing-dev.h | 19 ++++++++++++++++++ include/linux/writeback.h | 1 - mm/page-writeback.c | 39 +++++++++++++++++++++++++------------ 4 files changed, 46 insertions(+), 16 deletions(-)
fs/fs-writeback.c +0 -3
@@ -2001,7 +2001,6 @@ static long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,static long wb_writeback (struct bdi_writeback *wb,struct wb_writeback_work *work) { -unsigned long wb_start = jiffies;long nr_pages = work->nr_pages;unsigned long dirtied_before = jiffies;struct inode *inode;
@@ -2055,8 +2054,6 @@ static long wb_writeback(struct bdi_writeback *wb, progress =__writeback_inodes_wb (wb, work);trace_writeback_written (wb, work); -wb_update_bandwidth (wb, wb_start); -/* * Did we write something? Try for more *
include/linux/backing-dev.h +19 -0
@@ -288,6 +288,17 @@ static inline struct bdi_writeback *inode_to_wb(const struct inode *inode)return inode->i_wb; } +static inline struct bdi_writeback *inode_to_wb_wbc ( +struct inode *inode, +struct writeback_control *wbc) +{ +/* +* If wbc does not have inode attached, it means cgroup writeback was +* disabled when wbc started. Just use the default wb in that case. +*/ +return wbc->wb ? wbc->wb : &inode_to_bdi (inode)->wb; +} +/** * unlocked_inode_to_wb_begin - begin unlocked inode wb access transaction * @inode: target inode
@@ -366,6 +377,14 @@ static inline struct bdi_writeback *inode_to_wb(struct inode *inode)return &inode_to_bdi (inode)->wb; } +static inline struct bdi_writeback *inode_to_wb_wbc ( +struct inode *inode, +struct writeback_control *wbc) +{ +return inode_to_wb (inode); +} + +static inline struct bdi_writeback *unlocked_inode_to_wb_begin (struct inode *inode,struct wb_lock_cookie *cookie) {
include/linux/writeback.h +0 -1
@@ -379,7 +379,6 @@ int dirty_writeback_centisecs_handler(struct ctl_table *table, int write,void global_dirty_limits (unsigned long *pbackground,unsigned long *pdirty);unsigned long wb_calc_thresh (struct bdi_writeback *wb,unsigned long thresh); -void wb_update_bandwidth (struct bdi_writeback *wb,unsigned long start_time);void balance_dirty_pages_ratelimited (struct address_space *mapping);bool wb_over_bg_thresh (struct bdi_writeback *wb);
mm/page-writeback.c +27 -12
@@ -1332,7 +1332,6 @@ static void wb_update_dirty_ratelimit(struct dirty_throttle_control *dtc,static void __wb_update_bandwidth (struct dirty_throttle_control *gdtc,struct dirty_throttle_control *mdtc, -unsigned long start_time,bool update_ratelimit) {struct bdi_writeback *wb = gdtc->wb;
@@ -1352,13 +1351,6 @@ static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc, dirtied =percpu_counter_read (&wb->stat[WB_DIRTIED ]); written =percpu_counter_read (&wb->stat[WB_WRITTEN ]); -/* -* Skip quiet periods when disk bandwidth is under-utilized. -* (at least 1s idle time between two flusher runs) -*/ -if (elapsed >HZ &&time_before (wb->bw_time_stamp, start_time)) - goto snapshot; -if (update_ratelimit) {domain_update_bandwidth (gdtc, now);wb_update_dirty_ratelimit (gdtc, dirtied, elapsed);
@@ -1374,17 +1366,36 @@ static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc, }wb_update_write_bandwidth (wb, elapsed, written); -snapshot: wb->dirtied_stamp = dirtied; wb->written_stamp = written; wb->bw_time_stamp = now; } -void wb_update_bandwidth (struct bdi_writeback *wb,unsigned long start_time) +static void wb_update_bandwidth (struct bdi_writeback *wb) {struct dirty_throttle_control gdtc = {GDTC_INIT (wb) }; -__wb_update_bandwidth (&gdtc,NULL , start_time, false); +spin_lock (&wb->list_lock); +__wb_update_bandwidth (&gdtc,NULL , false); +spin_unlock (&wb->list_lock); +} + +/* Interval after which we consider wb idle and don't estimate bandwidth */ +#define WB_BANDWIDTH_IDLE_JIF (HZ) + +static void wb_bandwidth_estimate_start (struct bdi_writeback *wb) +{ +unsigned long now = jiffies; +unsigned long elapsed = now -READ_ONCE (wb->bw_time_stamp); + +if (elapsed >WB_BANDWIDTH_IDLE_JIF && + !atomic_read (&wb->writeback_inodes)) { +spin_lock (&wb->list_lock); + wb->dirtied_stamp =wb_stat (wb,WB_DIRTIED ); + wb->written_stamp =wb_stat (wb,WB_WRITTEN ); + wb->bw_time_stamp = now; +spin_unlock (&wb->list_lock); + } }/*
@@ -1713,7 +1724,7 @@ static void balance_dirty_pages(struct bdi_writeback *wb,if (time_is_before_jiffies (wb->bw_time_stamp +BANDWIDTH_INTERVAL )) {spin_lock (&wb->list_lock); -__wb_update_bandwidth (gdtc, mdtc, start_time, true); +__wb_update_bandwidth (gdtc, mdtc, true);spin_unlock (&wb->list_lock); }
@@ -2347,9 +2358,12 @@ EXPORT_SYMBOL(generic_writepages);int do_writepages (struct address_space *mapping,struct writeback_control *wbc) {int ret; +struct bdi_writeback *wb;if (wbc->nr_to_write <=0 )return 0 ; + wb =inode_to_wb_wbc (mapping->host, wbc); +wb_bandwidth_estimate_start (wb);while (1 ) {if (mapping->a_ops->writepages) ret = mapping->a_ops->writepages (mapping, wbc);
@@ -2360,6 +2374,7 @@ int do_writepages(struct address_space *mapping, struct writeback_control *wbc)cond_resched ();congestion_wait (BLK_RW_ASYNC ,HZ /50 ); } +wb_update_bandwidth (wb);return ret; }
Signature · 1 line
2.26.2
Jan Kara
maintainerPATCH v3 3/5 writeback: Fix bandwidth estimate for spiky workload
In reply to Jan KaraMichael Stapelberg has reported that for workload with short big spikes of writes (GCC linker seem to trigger this frequently) the write throughput is heavily underestimated and tends to steadily sink until it reaches zero. This has rather bad impact on writeback throttling (causing stalls). The problem is that writeback throughput estimate gets updated at most once per 200 ms. One update happens early after we submit pages for writeback (at that point writeout of only small fraction of pages is completed and thus observed throughput is tiny). Next update happens only during the next write spike (updates happen only from inode writeback and dirty throttling code) and if that is more than 1s after previous spike, we decide system was idle and just ignore whatever was written until this moment.
Fix the problem by making sure writeback throughput estimate is also updated shortly after writeback completes to get reasonable estimate of throughput for spiky workloads.
--- include/linux/backing-dev-defs.h | 1 + include/linux/writeback.h | 1 + mm/backing-dev.c | 10 +++++++++ mm/page-writeback.c | 35 +++++++++++++++++--------------- 4 files changed, 31 insertions(+), 16 deletions(-)
include/linux/backing-dev-defs.h +1 -0
@@ -143,6 +143,7 @@ struct bdi_writeback {spinlock_t work_lock;/* protects work_list & dwork scheduling */ struct list_head work_list;struct delayed_work dwork;/* work item used for writeback */ +struct delayed_work bw_dwork;/* work item used for bandwidth estimate */ unsigned long dirty_sleep;/* last wait */
include/linux/writeback.h +1 -0
@@ -379,6 +379,7 @@ int dirty_writeback_centisecs_handler(struct ctl_table *table, int write,void global_dirty_limits (unsigned long *pbackground,unsigned long *pdirty);unsigned long wb_calc_thresh (struct bdi_writeback *wb,unsigned long thresh); +void wb_update_bandwidth (struct bdi_writeback *wb);void balance_dirty_pages_ratelimited (struct address_space *mapping);bool wb_over_bg_thresh (struct bdi_writeback *wb);
mm/backing-dev.c +10 -0
@@ -271,6 +271,14 @@ void wb_wakeup_delayed(struct bdi_writeback *wb)spin_unlock_bh (&wb->work_lock); } +static void wb_update_bandwidth_workfn (struct work_struct *work) +{ +struct bdi_writeback *wb =container_of (to_delayed_work (work), + struct bdi_writeback, bw_dwork); + +wb_update_bandwidth (wb); +} +/* * Initial write bandwidth: 100 MB/s */
@@ -303,6 +311,7 @@ static int wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi,spin_lock_init (&wb->work_lock);INIT_LIST_HEAD (&wb->work_list);INIT_DELAYED_WORK (&wb->dwork, wb_workfn); +INIT_DELAYED_WORK (&wb->bw_dwork, wb_update_bandwidth_workfn); wb->dirty_sleep = jiffies; err =fprop_local_init_percpu (&wb->completions, gfp);
@@ -351,6 +360,7 @@ static void wb_shutdown(struct bdi_writeback *wb)mod_delayed_work (bdi_wq, &wb->dwork,0 );flush_delayed_work (&wb->dwork);WARN_ON (!list_empty (&wb->work_list)); +flush_delayed_work (&wb->bw_dwork); }static void wb_exit (struct bdi_writeback *wb)
mm/page-writeback.c +19 -16
@@ -1340,14 +1340,7 @@ static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc,unsigned long dirtied;unsigned long written; -lockdep_assert_held (&wb->list_lock); - -/* -* rate-limit, only update once every 200ms. -*/ -if (elapsed <BANDWIDTH_INTERVAL ) -return ; - +spin_lock (&wb->list_lock); dirtied =percpu_counter_read (&wb->stat[WB_DIRTIED ]); written =percpu_counter_read (&wb->stat[WB_WRITTEN ]);
@@ -1369,15 +1362,14 @@ static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc, wb->dirtied_stamp = dirtied; wb->written_stamp = written; wb->bw_time_stamp = now; +spin_unlock (&wb->list_lock); } -static void wb_update_bandwidth (struct bdi_writeback *wb) +void wb_update_bandwidth (struct bdi_writeback *wb) {struct dirty_throttle_control gdtc = {GDTC_INIT (wb) }; -spin_lock (&wb->list_lock);__wb_update_bandwidth (&gdtc,NULL , false); -spin_unlock (&wb->list_lock); }/* Interval after which we consider wb idle and don't estimate bandwidth */
@@ -1722,11 +1714,8 @@ static void balance_dirty_pages(struct bdi_writeback *wb, wb->dirty_exceeded =1 ;if (time_is_before_jiffies (wb->bw_time_stamp + -BANDWIDTH_INTERVAL )) { -spin_lock (&wb->list_lock); +BANDWIDTH_INTERVAL ))__wb_update_bandwidth (gdtc, mdtc, true); -spin_unlock (&wb->list_lock); - }/* throttle according to the chosen dtc */ dirty_ratelimit = wb->dirty_ratelimit;
@@ -2374,7 +2363,13 @@ int do_writepages(struct address_space *mapping, struct writeback_control *wbc)cond_resched ();congestion_wait (BLK_RW_ASYNC ,HZ /50 ); } -wb_update_bandwidth (wb); +/* +* Usually few pages are written by now from those we've just submitted +* but if there's constant writeback being submitted, this makes sure +* writeback bandwidth is updated once in a while. +*/ +if (time_is_before_jiffies (wb->bw_time_stamp +BANDWIDTH_INTERVAL )) +wb_update_bandwidth (wb);return ret; }
@@ -2754,6 +2749,14 @@ static void wb_inode_writeback_start(struct bdi_writeback *wb)static void wb_inode_writeback_end (struct bdi_writeback *wb) {atomic_dec (&wb->writeback_inodes); +/* +* Make sure estimate of writeback throughput gets updated after +* writeback completed. We delay the update by BANDWIDTH_INTERVAL +* (which is the interval other bandwidth updates use for batching) so +* that if multiple inodes end writeback at a similar time, they get +* batched into one bandwidth update. +*/ +queue_delayed_work (bdi_wq, &wb->bw_dwork,BANDWIDTH_INTERVAL ); }int test_clear_page_writeback (struct page *page)
Signature · 1 line
2.26.2
Jan Kara
maintainerPATCH v3 4/5 writeback: Rename domain_update_bandwidth()
In reply to Jan KaraRename domain_update_bandwidth() to domain_update_dirty_limit(). The original name is a misnomer. The function has nothing to do with a bandwidth, it updates dirty limits.
--- mm/page-writeback.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
mm/page-writeback.c +4 -4
@@ -1147,8 +1147,8 @@ static void update_dirty_limit(struct dirty_throttle_control *dtc) dom->dirty_limit = limit; } -static void domain_update_bandwidth (struct dirty_throttle_control *dtc, -unsigned long now) +static void domain_update_dirty_limit (struct dirty_throttle_control *dtc, +unsigned long now) {struct wb_domain *dom =dtc_dom (dtc);
@@ -1345,7 +1345,7 @@ static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc, written =percpu_counter_read (&wb->stat[WB_WRITTEN ]);if (update_ratelimit) { -domain_update_bandwidth (gdtc, now); +domain_update_dirty_limit (gdtc, now);wb_update_dirty_ratelimit (gdtc, dirtied, elapsed);/*
@@ -1353,7 +1353,7 @@ static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc,* compiler has no way to figure that out. Help it. */ if (IS_ENABLED (CONFIG_CGROUP_WRITEBACK ) && mdtc) { -domain_update_bandwidth (mdtc, now); +domain_update_dirty_limit (mdtc, now);wb_update_dirty_ratelimit (mdtc, dirtied, elapsed); } }
Signature · 1 line
2.26.2
Jan Kara
maintainerPATCH v3 5/5 writeback: Use READ_ONCE for unlocked reads of writeback stats
In reply to Jan KaraWe do some unlocked reads of writeback statistics like avg_write_bandwidth, dirty_ratelimit, or bw_time_stamp. Generally we are fine with getting somewhat out-of-date values but actually getting different values in various parts of the functions because the compiler decided to reload value from original memory location could confuse calculations. Use READ_ONCE for these unlocked accesses and WRITE_ONCE for the updates to be on the safe side.
--- mm/page-writeback.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-)
mm/page-writeback.c +15 -13
@@ -183,7 +183,7 @@ static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb)static void wb_min_max_ratio (struct bdi_writeback *wb,unsigned long *minp,unsigned long *maxp) { -unsigned long this_bw = wb->avg_write_bandwidth; +unsigned long this_bw =READ_ONCE (wb->avg_write_bandwidth);unsigned long tot_bw =atomic_long_read (&wb->bdi->tot_write_bandwidth);unsigned long long min = wb->bdi->min_ratio;unsigned long long max = wb->bdi->max_ratio;
@@ -892,7 +892,7 @@ static long long pos_ratio_polynom(unsigned long setpoint,static void wb_position_ratio (struct dirty_throttle_control *dtc) {struct bdi_writeback *wb = dtc->wb; -unsigned long write_bw = wb->avg_write_bandwidth; +unsigned long write_bw =READ_ONCE (wb->avg_write_bandwidth);unsigned long freerun =dirty_freerun_ceiling (dtc->thresh, dtc->bg_thresh);unsigned long limit =hard_dirty_limit (dtc_dom (dtc), dtc->thresh);unsigned long wb_thresh = dtc->wb_thresh;
@@ -1115,7 +1115,7 @@ static void wb_update_write_bandwidth(struct bdi_writeback *wb, &wb->bdi->tot_write_bandwidth) <= 0); } wb->write_bandwidth = bw; - wb->avg_write_bandwidth = avg; + wb->avg_write_bandwidth =WRITE_ONCE (avg); }static void update_dirty_limit (struct dirty_throttle_control *dtc)
@@ -1324,7 +1324,7 @@ static void wb_update_dirty_ratelimit(struct dirty_throttle_control *dtc,else dirty_ratelimit -= step; - wb->dirty_ratelimit =max (dirty_ratelimit,1UL ); + wb->dirty_ratelimit =WRITE_ONCE (max (dirty_ratelimit,1UL )); wb->balanced_dirty_ratelimit = balanced_dirty_ratelimit;trace_bdi_dirty_ratelimit (wb, dirty_rate, task_ratelimit);
@@ -1336,11 +1336,12 @@ static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc, {struct bdi_writeback *wb = gdtc->wb;unsigned long now = jiffies; -unsigned long elapsed = now - wb->bw_time_stamp; +unsigned long elapsed;unsigned long dirtied;unsigned long written;spin_lock (&wb->list_lock); + elapsed = now - wb->bw_time_stamp; dirtied =percpu_counter_read (&wb->stat[WB_DIRTIED ]); written =percpu_counter_read (&wb->stat[WB_WRITTEN ]);
@@ -1361,7 +1362,7 @@ static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc, wb->dirtied_stamp = dirtied; wb->written_stamp = written; - wb->bw_time_stamp = now; + wb->bw_time_stamp =WRITE_ONCE (now);spin_unlock (&wb->list_lock); }
@@ -1385,7 +1386,7 @@ static void wb_bandwidth_estimate_start(struct bdi_writeback *wb)spin_lock (&wb->list_lock); wb->dirtied_stamp =wb_stat (wb,WB_DIRTIED ); wb->written_stamp =wb_stat (wb,WB_WRITTEN ); - wb->bw_time_stamp = now; + wb->bw_time_stamp =WRITE_ONCE (now);spin_unlock (&wb->list_lock); } }
@@ -1410,7 +1411,7 @@ static unsigned long dirty_poll_interval(unsigned long dirty,static unsigned long wb_max_pause (struct bdi_writeback *wb,unsigned long wb_dirty) { -unsigned long bw = wb->avg_write_bandwidth; +unsigned long bw =READ_ONCE (wb->avg_write_bandwidth);unsigned long t;/*
@@ -1432,8 +1433,8 @@ static long wb_min_pause(struct bdi_writeback *wb,unsigned long dirty_ratelimit, int *nr_dirtied_pause) { - long hi = ilog2(wb->avg_write_bandwidth); -long lo =ilog2 (wb->dirty_ratelimit); + long hi = ilog2(READ_ONCE(wb->avg_write_bandwidth)); +long lo =ilog2 (READ_ONCE (wb->dirty_ratelimit));long t;/* target pause */ long pause;/* estimated next pause */ int pages;/* target nr_dirtied_pause */
@@ -1713,12 +1714,12 @@ static void balance_dirty_pages(struct bdi_writeback *wb,if (dirty_exceeded && !wb->dirty_exceeded) wb->dirty_exceeded =1 ; -if (time_is_before_jiffies (wb->bw_time_stamp + +if (time_is_before_jiffies (READ_ONCE (wb->bw_time_stamp) +BANDWIDTH_INTERVAL ))__wb_update_bandwidth (gdtc, mdtc, true);/* throttle according to the chosen dtc */ - dirty_ratelimit = wb->dirty_ratelimit; + dirty_ratelimit =READ_ONCE (wb->dirty_ratelimit); task_ratelimit = ((u64 )dirty_ratelimit * sdtc->pos_ratio) >>RATELIMIT_CALC_SHIFT ; max_pause =wb_max_pause (wb, sdtc->wb_dirty);
@@ -2368,7 +2369,8 @@ int do_writepages(struct address_space *mapping, struct writeback_control *wbc)* but if there's constant writeback being submitted, this makes sure * writeback bandwidth is updated once in a while. */ -if (time_is_before_jiffies (wb->bw_time_stamp +BANDWIDTH_INTERVAL )) +if (time_is_before_jiffies (READ_ONCE (wb->bw_time_stamp) + +BANDWIDTH_INTERVAL ))wb_update_bandwidth (wb);return ret; }
Signature · 1 line
2.26.2
Jan Kara
maintainerHello,
so this is really embarrasing but I have sent the version of patches without the fixes :-|. I'm really sorry for the noise. I will send v4 now with updated patch 5/5.
Honza
Quoted 27 lines · Jan Kara
Hello,
Here is the third revision of the patch series to fix estimate of writeback throughput when device is not fully busy doing writeback. Michael Stapelberg has reported that such workload (e.g. generated by linking) tends to push estimated throughput down to 0 and as a result writeback on the device is practically stalled.
The first three patches fix the reported issue, the remaining two patches are unrelated cleanups of problems I've noticed when reading the code.
Andrew, can you please pick up the series? Thanks!
Honza
Changes since v2:
* Rebased on top of 5.14-rc1
* Fixed compilation failure introduced by patch 5/5Changes since v1:
* Added comments to better explain the logic
* Added Tested-by tag
* AddedWRITE_ONCEcalls matchingREAD_ONCEin patch 5/5Previous versions:
Signature · 2 lines
Jan Kara <[email protected]> SUSE Labs, CR