usb: hcd: Revert 306c54d0edb6ba94d39877524dddebaad7770cf2: Try MSI interrupts on PCI devices
Subsystems (2)
PATCH 1/1 usb: hcd: Revert 306c54d0edb6ba94d39877524dddebaad7770cf2: Try MSI interrupts on PCI devices
Customers have been reporting that the I/O is radically being slowed down to HPE virtual USB ILO served DVD images during installation.
Lots of investigation by the Red Hat lab has found that the issue is because MSI edge interrupts do not work properly for these ILO USB devices.
We start fast and then drop to polling mode and its unusable.
The issue exists currently upstream on 5.13 as tested by Red Hat, and reverting the mentioned patch corrects this upstream.
David Jeffery has this explanation:
The problem with the patch turning on MSI appears to be that the ehci driver (and possibly other usb controller types too) wasn't written to support edge-triggered interrupts.
The ehci_irq routine appears to be written in such a way that it will be racy with multiple interrupt source bits.
With a level-triggered interrupt, it gets called another time and cleans up other interrupt sources.
But with MSI edge, the interrupt state staying high results in no new interrupt and ehci has to run based on polling.
static irqreturn_t ehci_irq (struct usb_hcd *hcd)
{
...
status = ehci_readl(ehci, &ehci->regs->status);
/* e.g. cardbus physical eject */
if (status == ~(u32) 0) {
ehci_dbg (ehci, "device removed\n");
goto dead;
}
/*
* We don't use STS_FLR, but some controllers don't like it to
* remain on, so mask it out along with the other status bits.
*/
masked_status = status & (INTR_MASK | STS_FLR);
/* Shared IRQ? */
if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
spin_unlock_irqrestore(&ehci->lock, flags);
return IRQ_NONE;
}
/* clear (just) interrupts */
ehci_writel(ehci, masked_status, &ehci->regs->status);...
ehci_irq() reads the interrupt status register and then writes the active interrupt-related bits back out to ack the interrupt cause. But with an edge interrupt, this is racy as another source of interrupt could be raised by ehci between the read and the write reaching the hardware.
e.g. If STS_IAA was set during the initial read, but some other bit like STS_INT gets raised by the hardware between the read and the write to the interrupt status register, the interrupt signal state won't drop. The interrupt state says high, and since it is now edged triggered with MSI, no new invocation of the interrupt handler gets triggered.
Pericom PCIe-USB adapter
--- drivers/usb/core/hcd-pci.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-)
drivers/usb/core/hcd-pci.c +4 -10
@@ -195,21 +195,20 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id,* make sure irq setup is not touched for xhci in generic hcd code */ if ((driver->flags &HCD_MASK ) <HCD_USB3 ) { - retval =pci_alloc_irq_vectors (dev,1 ,1 ,PCI_IRQ_LEGACY |PCI_IRQ_MSI ); -if (retval <0 ) { +if (!dev->irq) {dev_err (&dev->dev,"Found HC with no IRQ. Check BIOS/PCI %s setup!\n" ,pci_name (dev)); retval = -ENODEV ; goto disable_pci; } - hcd_irq =pci_irq_vector (dev,0 ); + hcd_irq = dev->irq; } hcd =usb_create_hcd (driver, &dev->dev,pci_name (dev));if (!hcd) { retval = -ENOMEM ; - goto free_irq_vectors; + goto disable_pci; } hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
@@ -288,9 +287,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id, put_hcd:usb_put_hcd (hcd); -free_irq_vectors: -if ((driver->flags &HCD_MASK ) <HCD_USB3 ) -pci_free_irq_vectors (dev); disable_pci:pci_disable_device (dev);dev_err (&dev->dev,"init %s fail, %d\n" ,pci_name (dev), retval);
@@ -352,8 +348,6 @@ void usb_hcd_pci_remove(struct pci_dev *dev)up_read (&companions_rwsem); }usb_put_hcd (hcd); -if ((hcd_driver_flags &HCD_MASK ) <HCD_USB3 ) -pci_free_irq_vectors (dev);pci_disable_device (dev); }EXPORT_SYMBOL_GPL (usb_hcd_pci_remove);
@@ -465,7 +459,7 @@ static int suspend_common(struct device *dev, bool do_wakeup)* synchronized here. */ if (!hcd->msix_enabled) -synchronize_irq (pci_irq_vector (pci_dev,0 )); +synchronize_irq (pci_dev->irq);/* Downstream ports from this root hub should already be quiesced, so * there will be no DMA activity. Now we can shut down the upstream
Signature · 1 line
1.8.3.1
Quoted 50 lines · Laurence Oberman
Customers have been reporting that the I/O is radically being slowed down to HPE virtual USB ILO served DVD images during installation.
Lots of investigation by the Red Hat lab has found that the issue is because MSI edge interrupts do not work properly for these ILO USB devices.
We start fast and then drop to polling mode and its unusable.The issue exists currently upstream on 5.13 as tested by Red Hat, and reverting the mentioned patch corrects this upstream.
David Jeffery has this explanation:
The problem with the patch turning on MSI appears to be that the ehci driver (and possibly other usb controller types too) wasn't written to support edge-triggered interrupts.
Theehci_irqroutine appears to be written in such a way that it will be racy with multiple interrupt source bits.
With a level-triggered interrupt, it gets called another time and cleans up other interrupt sources.
But with MSI edge, the interrupt state staying high results in no new interrupt and ehci has to run based on polling.static
irqreturn_tehci_irq(structusb_hcd*hcd)
{
...status = ehci_readl(ehci, &ehci->regs->status); /* e.g. cardbus physical eject */ if (status == ~(u32) 0) { ehci_dbg (ehci, "device removed\n"); goto dead; } /* * We don't use STS_FLR, but some controllers don't like it to * remain on, so mask it out along with the other status bits. */ masked_status = status & (INTR_MASK | STS_FLR); /* Shared IRQ? */ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { spin_unlock_irqrestore(&ehci->lock, flags); return IRQ_NONE; } /* clear (just) interrupts */ ehci_writel(ehci, masked_status, &ehci->regs->status);...
Quoted 10 lines
ehci_irq()reads the interrupt status register and then writes the active interrupt-related bits back out to ack the interrupt cause. But with an edge interrupt, this is racy as another source of interrupt could be raised by ehci between the read and the write reaching the hardware.
e.g. IfSTS_IAAwas set during the initial read, but some other bit likeSTS_INTgets raised by the hardware between the read and the write to the interrupt status register, the interrupt signal state won't drop. The interrupt state says high, and since it is now edged triggered with MSI, no new invocation of the interrupt handler gets triggered.
Wouldn't it be better to change these other PCI drivers by adding proper MSI support? I don't know what would be involved, but presumably it wouldn't be very hard. (Just run the handler in a loop until all the interrupt status bits are off?)
Alan Stern
Quoted 77 lines · Alan Stern
Quoted 59 lines · Laurence Oberman
Customers have been reporting that the I/O is radically being slowed down to HPE virtual USB ILO served DVD images during installation.
Lots of investigation by the Red Hat lab has found that the issue is
because MSI edge interrupts do not work properly for these ILO USB devices.
We start fast and then drop to polling mode and its unusable.The issue exists currently upstream on 5.13 as tested by Red Hat, and reverting the mentioned patch corrects this upstream.
David Jeffery has this explanation:
The problem with the patch turning on MSI appears to be that the ehci
driver (and possibly other usb controller types too) wasn't written to
support edge-triggered interrupts.
Theehci_irqroutine appears to be written in such a way that it will
be racy with multiple interrupt source bits.
With a level-triggered interrupt, it gets called another time and cleans
up other interrupt sources.
But with MSI edge, the interrupt state staying high results in no new interrupt and ehci has to run based on polling.static
irqreturn_tehci_irq(structusb_hcd*hcd)
{
...status = ehci_readl(ehci, &ehci->regs->status); /* e.g. cardbus physical eject */ if (status == ~(u32) 0) { ehci_dbg (ehci, "device removed\n"); goto dead; } /* * We don't use STS_FLR, but some controllers don't like it to * remain on, so mask it out along with the other status bits. */ masked_status = status & (INTR_MASK | STS_FLR); /* Shared IRQ? */ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { spin_unlock_irqrestore(&ehci->lock, flags); return IRQ_NONE; } /* clear (just) interrupts */ ehci_writel(ehci, masked_status, &ehci->regs->status);...
Quoted 16 lines
ehci_irq()reads the interrupt status register and then writes the active
interrupt-related bits back out to ack the interrupt cause. But with an edge interrupt, this is racy as another source of interrupt
could be raised by ehci between the read and the write reaching the
hardware.
e.g. IfSTS_IAAwas set during the initial read, but some other bit likeSTS_INTgets raised by the hardware between the read and the write to the
interrupt status register, the interrupt signal state won't drop. The interrupt state says high, and since it is now edged triggered with
MSI, no new invocation of the interrupt handler gets triggered.
Quoted 8 lines
Wouldn't it be better to change these other PCI drivers by adding proper MSI support? I don't know what would be involved, but presumably it wouldn't be very hard. (Just run the handler in a loop
until all the interrupt status bits are off?)Alan Stern
Hello
Agree with you that is a big hammer approach, but it's such a key piece of the massive number of HPE servers out there and we have many affected customers.
While I did all the test work and discovery etc, I am definitely not a USB kernel guy very often, I spend most of my time in storage. I will listen for the other replies to see how the folks who know the subsystem better than I would want this reolved.
Thanks
Laurence
Quoted 5 lines · Laurence Oberman
Quoted 4 lines · Alan Stern
Quoted 3 lines · Laurence Oberman
Customers have been reporting that the I/O is radically being slowed down to HPE virtual USB ILO served DVD images during installation.
Thanks for the report!
Quoted 72 lines
Quoted 72 lines
Quoted 71 lines
Lots of investigation by the Red Hat lab has found that the issue is
because MSI edge interrupts do not work properly for these ILO USB devices.
We start fast and then drop to polling mode and its unusable.The issue exists currently upstream on 5.13 as tested by Red Hat, and reverting the mentioned patch corrects this upstream.
David Jeffery has this explanation:
The problem with the patch turning on MSI appears to be that the ehci
driver (and possibly other usb controller types too) wasn't written to
support edge-triggered interrupts.
Theehci_irqroutine appears to be written in such a way that it will
be racy with multiple interrupt source bits.
With a level-triggered interrupt, it gets called another time and cleans
up other interrupt sources.
But with MSI edge, the interrupt state staying high results in no new interrupt and ehci has to run based on polling.static
irqreturn_tehci_irq(structusb_hcd*hcd)
{
...status = ehci_readl(ehci, &ehci->regs->status); /* e.g. cardbus physical eject */ if (status == ~(u32) 0) { ehci_dbg (ehci, "device removed\n"); goto dead; } /* * We don't use STS_FLR, but some controllers don't like it to * remain on, so mask it out along with the other status bits. */ masked_status = status & (INTR_MASK | STS_FLR); /* Shared IRQ? */ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { spin_unlock_irqrestore(&ehci->lock, flags); return IRQ_NONE; } /* clear (just) interrupts */ ehci_writel(ehci, masked_status, &ehci->regs->status);...
ehci_irq()reads the interrupt status register and then writes the active
interrupt-related bits back out to ack the interrupt cause. But with an edge interrupt, this is racy as another source of interrupt
could be raised by ehci between the read and the write reaching the
hardware.
e.g. IfSTS_IAAwas set during the initial read, but some other bit likeSTS_INTgets raised by the hardware between the read and the write to the
interrupt status register, the interrupt signal state won't drop. The interrupt state says high, and since it is now edged triggered with
MSI, no new invocation of the interrupt handler gets triggered.
Quoted 5 lines
Quoted 5 lines
Wouldn't it be better to change these other PCI drivers by adding proper MSI support? I don't know what would be involved, but presumably it wouldn't be very hard. (Just run the handler in a loop
until all the interrupt status bits are off?)
My first impression is the same as Alan's. Can we have at least more information on this?
Quoted 8 lines
Agree with you that is a big hammer approach, but it's such a key piece of the massive number of HPE servers out there and we have many affected customers.
While I did all the test work and discovery etc, I am definitely not a USB kernel guy very often, I spend most of my time in storage. I will listen for the other replies to see how the folks who know the subsystem better than I would want this reolved.
As a quick fix I would suggest to quirk out the current EHCI controllers on the affected machines rather then drop MSI for all.
It may be done via PCI quirk mechanism. In any case I prefer what Alan says.
Signature · 2 lines
With Best Regards, Andy Shevchenko
kernel test robot
build botThank you for the patch! Perhaps something to improve:
Hi Laurence,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on usb/usb-testing]
[also build test WARNING on peter.chen-usb/for-usb-next balbi-usb/testing/next v5.14-rc1 next-20210713] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Laurence-Oberman/usb-hcd-Revert-306c54d0edb6ba94d39877524dddebaad7770cf2-Try-MSI-interrupts-on-PCI-devices/20210714-025312 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing config: arc-allyesconfig (attached as .config) compiler: arceb-elf-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/3ea2a748176f21120e150f0645bc3c22e1cea48f
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Laurence-Oberman/usb-hcd-Revert-306c54d0edb6ba94d39877524dddebaad7770cf2-Try-MSI-interrupts-on-PCI-devices/20210714-025312 git checkout 3ea2a748176f21120e150f0645bc3c22e1cea48f
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
drivers/usb/core/hcd-pci.c: In function 'usb_hcd_pci_remove':
>> drivers/usb/core/hcd-pci.c:316:8: warning: variable 'hcd_driver_flags' set but not used [-Wunused-but-set-variable]
316 | int hcd_driver_flags;
| ^~~~~~~~~~~~~~~~vim +/hcd_driver_flags +316 drivers/usb/core/hcd-pci.c
^1da177e4c3f41 Linus Torvalds 2005-04-16 300
^1da177e4c3f41 Linus Torvalds 2005-04-16 301 /**
^1da177e4c3f41 Linus Torvalds 2005-04-16 302 * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
^1da177e4c3f41 Linus Torvalds 2005-04-16 303 * @dev: USB Host Controller being removed
41631d3616c363 Ahmed S. Darwish 2020-10-19 304 *
41631d3616c363 Ahmed S. Darwish 2020-10-19 305 * Context: task context, might sleep
^1da177e4c3f41 Linus Torvalds 2005-04-16 306 *
^1da177e4c3f41 Linus Torvalds 2005-04-16 307 * Reverses the effect of usb_hcd_pci_probe(), first invoking
^1da177e4c3f41 Linus Torvalds 2005-04-16 308 * the HCD's stop() method. It is always called from a thread
^1da177e4c3f41 Linus Torvalds 2005-04-16 309 * context, normally "rmmod", "apmd", or something similar.
^1da177e4c3f41 Linus Torvalds 2005-04-16 310 *
^1da177e4c3f41 Linus Torvalds 2005-04-16 311 * Store this function in the HCD's struct pci_driver as remove().
^1da177e4c3f41 Linus Torvalds 2005-04-16 312 */
^1da177e4c3f41 Linus Torvalds 2005-04-16 313 void usb_hcd_pci_remove(struct pci_dev *dev)
^1da177e4c3f41 Linus Torvalds 2005-04-16 314 {
^1da177e4c3f41 Linus Torvalds 2005-04-16 315 struct usb_hcd *hcd;
7b2816dd293031 Andy Shevchenko 2020-08-14 @316 int hcd_driver_flags;
^1da177e4c3f41 Linus Torvalds 2005-04-16 317
^1da177e4c3f41 Linus Torvalds 2005-04-16 318 hcd = pci_get_drvdata(dev);
^1da177e4c3f41 Linus Torvalds 2005-04-16 319 if (!hcd)
^1da177e4c3f41 Linus Torvalds 2005-04-16 320 return;
^1da177e4c3f41 Linus Torvalds 2005-04-16 321
7b2816dd293031 Andy Shevchenko 2020-08-14 322 hcd_driver_flags = hcd->driver->flags;
7b2816dd293031 Andy Shevchenko 2020-08-14 323
3da7cff4e79e4a Alan Stern 2010-06-25 324 if (pci_dev_run_wake(dev))
3da7cff4e79e4a Alan Stern 2010-06-25 325 pm_runtime_get_noresume(&dev->dev);
3da7cff4e79e4a Alan Stern 2010-06-25 326
c548795abe0d35 Alan Stern 2010-06-09 327 /* Fake an interrupt request in order to give the driver a chance
c548795abe0d35 Alan Stern 2010-06-09 328 * to test whether the controller hardware has been removed (e.g.,
c548795abe0d35 Alan Stern 2010-06-09 329 * cardbus physical eject).
c548795abe0d35 Alan Stern 2010-06-09 330 */
c548795abe0d35 Alan Stern 2010-06-09 331 local_irq_disable();
c548795abe0d35 Alan Stern 2010-06-09 332 usb_hcd_irq(0, hcd);
c548795abe0d35 Alan Stern 2010-06-09 333 local_irq_enable();
c548795abe0d35 Alan Stern 2010-06-09 334
05768918b9a122 Alan Stern 2013-03-28 335 /* Note: dev_set_drvdata must be called while holding the rwsem */
05768918b9a122 Alan Stern 2013-03-28 336 if (dev->class == CL_EHCI) {
05768918b9a122 Alan Stern 2013-03-28 337 down_write(&companions_rwsem);
05768918b9a122 Alan Stern 2013-03-28 338 for_each_companion(dev, hcd, ehci_remove);
05768918b9a122 Alan Stern 2013-03-28 339 usb_remove_hcd(hcd);
05768918b9a122 Alan Stern 2013-03-28 340 dev_set_drvdata(&dev->dev, NULL);
05768918b9a122 Alan Stern 2013-03-28 341 up_write(&companions_rwsem);
05768918b9a122 Alan Stern 2013-03-28 342 } else {
05768918b9a122 Alan Stern 2013-03-28 343 /* Not EHCI; just clear the companion pointer */
05768918b9a122 Alan Stern 2013-03-28 344 down_read(&companions_rwsem);
05768918b9a122 Alan Stern 2013-03-28 345 hcd->self.hs_companion = NULL;
^1da177e4c3f41 Linus Torvalds 2005-04-16 346 usb_remove_hcd(hcd);
05768918b9a122 Alan Stern 2013-03-28 347 dev_set_drvdata(&dev->dev, NULL);
05768918b9a122 Alan Stern 2013-03-28 348 up_read(&companions_rwsem);
05768918b9a122 Alan Stern 2013-03-28 349 }
^1da177e4c3f41 Linus Torvalds 2005-04-16 350 usb_put_hcd(hcd);
^1da177e4c3f41 Linus Torvalds 2005-04-16 351 pci_disable_device(dev);
^1da177e4c3f41 Linus Torvalds 2005-04-16 352 }782e70c6fc2290 Greg Kroah-Hartman 2008-01-25 353 EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
^1da177e4c3f41 Linus Torvalds 2005-04-16 354
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Quoted 2 lines · Laurence Oberman
Customers have been reporting that the I/O is radically being slowed down to HPE virtual USB ILO served DVD images during installation.
Side note:
Simple changing
- retval = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY | PCI_IRQ_MSI);
+ retval = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
should have the same effect without touching tons of a good code.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 14 lines · Andy Shevchenko
Quoted 3 lines · Laurence Oberman
Customers have been reporting that the I/O is radically being slowed down to HPE virtual USB ILO served DVD images during installation.
Side note:
Simple changing
(quoted diff) +0
-1- retval = pci_alloc_irq_vectors(dev, 1, 1,
PCI_IRQ_LEGACY|PCI_IRQ_MSI);(quoted diff) +1
-0+ retval = pci_alloc_irq_vectors(dev, 1, 1,
PCI_IRQ_LEGACY);
Quoted 2 lines
should have the same effect without touching tons of a good code.
Hi Andy, I am fine with that, and actually its one of the suggestions David Jeffery had as well.
I will etst it today.
I can follow up with a new patch once everybody agrees.
We probbaly should get this initially fixed while we wait for a final complete fix for other devices.
Regards
Laurence
Quoted 14 lines · Andy Shevchenko
Quoted 3 lines · Laurence Oberman
Customers have been reporting that the I/O is radically being slowed down to HPE virtual USB ILO served DVD images during installation.
Side note:
Simple changing
(quoted diff) +0
-1- retval = pci_alloc_irq_vectors(dev, 1, 1,
PCI_IRQ_LEGACY|PCI_IRQ_MSI);(quoted diff) +1
-0+ retval = pci_alloc_irq_vectors(dev, 1, 1,
PCI_IRQ_LEGACY);
Quoted 2 lines
should have the same effect without touching tons of a good code.
Andy and Alan,
I tested this and as expected it worked as well.
However David has given me a possible ehci fix which would be the best outcome you wanted, I am testing that now and will follow up tomorrow.
Regards
Laurence
kernel test robot
build botThank you for the patch! Perhaps something to improve:
Hi Laurence,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on usb/usb-testing]
[also build test WARNING on peter.chen-usb/for-usb-next balbi-usb/testing/next v5.14-rc1 next-20210713] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Laurence-Oberman/usb-hcd-Revert-306c54d0edb6ba94d39877524dddebaad7770cf2-Try-MSI-interrupts-on-PCI-devices/20210714-025312 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing config: x86_64-randconfig-a002-20210713 (attached as .config) compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 8d69635ed9ecf36fd0ca85906bfde17949671cbe)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/3ea2a748176f21120e150f0645bc3c22e1cea48f
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Laurence-Oberman/usb-hcd-Revert-306c54d0edb6ba94d39877524dddebaad7770cf2-Try-MSI-interrupts-on-PCI-devices/20210714-025312 git checkout 3ea2a748176f21120e150f0645bc3c22e1cea48f
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
>> drivers/usb/core/hcd-pci.c:316:8: warning: variable 'hcd_driver_flags' set but not used [-Wunused-but-set-variable]
int hcd_driver_flags;
^1 warning generated.
vim +/hcd_driver_flags +316 drivers/usb/core/hcd-pci.c
^1da177e4c3f4152 Linus Torvalds 2005-04-16 300
^1da177e4c3f4152 Linus Torvalds 2005-04-16 301 /**
^1da177e4c3f4152 Linus Torvalds 2005-04-16 302 * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
^1da177e4c3f4152 Linus Torvalds 2005-04-16 303 * @dev: USB Host Controller being removed
41631d3616c36305 Ahmed S. Darwish 2020-10-19 304 *
41631d3616c36305 Ahmed S. Darwish 2020-10-19 305 * Context: task context, might sleep
^1da177e4c3f4152 Linus Torvalds 2005-04-16 306 *
^1da177e4c3f4152 Linus Torvalds 2005-04-16 307 * Reverses the effect of usb_hcd_pci_probe(), first invoking
^1da177e4c3f4152 Linus Torvalds 2005-04-16 308 * the HCD's stop() method. It is always called from a thread
^1da177e4c3f4152 Linus Torvalds 2005-04-16 309 * context, normally "rmmod", "apmd", or something similar.
^1da177e4c3f4152 Linus Torvalds 2005-04-16 310 *
^1da177e4c3f4152 Linus Torvalds 2005-04-16 311 * Store this function in the HCD's struct pci_driver as remove().
^1da177e4c3f4152 Linus Torvalds 2005-04-16 312 */
^1da177e4c3f4152 Linus Torvalds 2005-04-16 313 void usb_hcd_pci_remove(struct pci_dev *dev)
^1da177e4c3f4152 Linus Torvalds 2005-04-16 314 {
^1da177e4c3f4152 Linus Torvalds 2005-04-16 315 struct usb_hcd *hcd;
7b2816dd293031b9 Andy Shevchenko 2020-08-14 @316 int hcd_driver_flags;
^1da177e4c3f4152 Linus Torvalds 2005-04-16 317
^1da177e4c3f4152 Linus Torvalds 2005-04-16 318 hcd = pci_get_drvdata(dev);
^1da177e4c3f4152 Linus Torvalds 2005-04-16 319 if (!hcd)
^1da177e4c3f4152 Linus Torvalds 2005-04-16 320 return;
^1da177e4c3f4152 Linus Torvalds 2005-04-16 321
7b2816dd293031b9 Andy Shevchenko 2020-08-14 322 hcd_driver_flags = hcd->driver->flags;
7b2816dd293031b9 Andy Shevchenko 2020-08-14 323
3da7cff4e79e4a71 Alan Stern 2010-06-25 324 if (pci_dev_run_wake(dev))
3da7cff4e79e4a71 Alan Stern 2010-06-25 325 pm_runtime_get_noresume(&dev->dev);
3da7cff4e79e4a71 Alan Stern 2010-06-25 326
c548795abe0d3520 Alan Stern 2010-06-09 327 /* Fake an interrupt request in order to give the driver a chance
c548795abe0d3520 Alan Stern 2010-06-09 328 * to test whether the controller hardware has been removed (e.g.,
c548795abe0d3520 Alan Stern 2010-06-09 329 * cardbus physical eject).
c548795abe0d3520 Alan Stern 2010-06-09 330 */
c548795abe0d3520 Alan Stern 2010-06-09 331 local_irq_disable();
c548795abe0d3520 Alan Stern 2010-06-09 332 usb_hcd_irq(0, hcd);
c548795abe0d3520 Alan Stern 2010-06-09 333 local_irq_enable();
c548795abe0d3520 Alan Stern 2010-06-09 334
05768918b9a122ce Alan Stern 2013-03-28 335 /* Note: dev_set_drvdata must be called while holding the rwsem */
05768918b9a122ce Alan Stern 2013-03-28 336 if (dev->class == CL_EHCI) {
05768918b9a122ce Alan Stern 2013-03-28 337 down_write(&companions_rwsem);
05768918b9a122ce Alan Stern 2013-03-28 338 for_each_companion(dev, hcd, ehci_remove);
05768918b9a122ce Alan Stern 2013-03-28 339 usb_remove_hcd(hcd);
05768918b9a122ce Alan Stern 2013-03-28 340 dev_set_drvdata(&dev->dev, NULL);
05768918b9a122ce Alan Stern 2013-03-28 341 up_write(&companions_rwsem);
05768918b9a122ce Alan Stern 2013-03-28 342 } else {
05768918b9a122ce Alan Stern 2013-03-28 343 /* Not EHCI; just clear the companion pointer */
05768918b9a122ce Alan Stern 2013-03-28 344 down_read(&companions_rwsem);
05768918b9a122ce Alan Stern 2013-03-28 345 hcd->self.hs_companion = NULL;
^1da177e4c3f4152 Linus Torvalds 2005-04-16 346 usb_remove_hcd(hcd);
05768918b9a122ce Alan Stern 2013-03-28 347 dev_set_drvdata(&dev->dev, NULL);
05768918b9a122ce Alan Stern 2013-03-28 348 up_read(&companions_rwsem);
05768918b9a122ce Alan Stern 2013-03-28 349 }
^1da177e4c3f4152 Linus Torvalds 2005-04-16 350 usb_put_hcd(hcd);
^1da177e4c3f4152 Linus Torvalds 2005-04-16 351 pci_disable_device(dev);
^1da177e4c3f4152 Linus Torvalds 2005-04-16 352 }782e70c6fc2290a0 Greg Kroah-Hartman 2008-01-25 353 EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
^1da177e4c3f4152 Linus Torvalds 2005-04-16 354
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org