Skip to contentSkip to conversation

btdev: Add proper checks for own_addr_type for extended advertising

PATCH Superseded Luiz Augusto von Dentz 2 participants 3 messages Jul 14, 2021 Bluetooth drivers

lore
Share & tools
lore

Luiz Augusto von Dentz

author maintainer
#0 lore raw

PATCH v2 1/1 btdev: Add proper checks for own_addr_type for extended advertising

From: Luiz Augusto von Dentz <[email protected]>

own_addr_type 0x01 and 0x03 shall check that a random address has properly been set and in case of 0x03 the resolving list actually contains the irk of the identity address:

BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 4, Part E page 2596

'If the advertising set's Own_Address_Type parameter is set to 0x01 and the random address for the advertising set has not been initialized, the Controller shall return the error code Invalid HCI Command Parameters (0x12).'

BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 4, Part E page 2597

'If the advertising set's Own_Address_Type parameter is set to 0x03, the controller's resolving list did not contain a matching entry, and the random address for the advertising set has not been initialized, the Controller shall return the error code Invalid HCI Command Parameters (0x12).'
---
v2: Fix checks for Own_Address_Type when is to 0x03 since it can work with both resolving list _and_ when a random address is set.

 emulator/btdev.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
emulator/btdev.c +44 -0
index 1567713d2..b6142f176 100644
@@ -4538,6 +4538,20 @@ static bool ext_adv_timeout(void *user_data)
 	return false;
 }
 
+static struct btdev_rl *rl_find(struct btdev *dev, uint8_t type, uint8_t *addr)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(dev->le_rl); i++) {
+		struct btdev_rl *rl = &dev->le_rl[i];
+
+		if (RL_ADDR_EQUAL(rl, type, addr))
+			return rl;
+	}
+
+	return NULL;
+}
+
 static int cmd_set_ext_adv_enable(struct btdev *dev, const void *data,
 							uint8_t len)
 {
@@ -4561,6 +4575,7 @@ static int cmd_set_ext_adv_enable(struct btdev *dev, const void *data,
 	for (i = 0; i < cmd->num_of_sets; i++) {
 		const struct bt_hci_cmd_ext_adv_set *eas;
 		struct le_ext_adv *ext_adv;
+		bool random_addr;
 
 		eas = data + sizeof(*cmd) + (sizeof(*eas) * i);
 
@@ -4576,6 +4591,35 @@ static int cmd_set_ext_adv_enable(struct btdev *dev, const void *data,
 			goto exit_complete;
 		}
 
+		random_addr = bacmp((bdaddr_t *)ext_adv->random_addr,
+							BDADDR_ANY);
+
+		/* If the advertising set's Own_Address_Type parameter
+		 * is set to 0x01 and the random address for
+		 * the advertising set has not been initialized, the
+		 * Controller shall return the error code Invalid HCI
+		 * Command Parameters (0x12).
+		 */
+		if (ext_adv->own_addr_type == 0x01 && !random_addr) {
+			status = BT_HCI_ERR_INVALID_PARAMETERS;
+			goto exit_complete;
+		}
+
+		/* If the advertising set's Own_Address_Type parameter is set
+		 * to 0x03, the controller's resolving list did not contain a
+		 * matching entry, and the random address for the advertising
+		 * set has not been initialized, the Controller shall return the
+		 * error code Invalid HCI Command Parameters (0x12).
+		 */
+		if (ext_adv->own_addr_type == 0x03 && !random_addr) {
+			if (!dev->le_rl_enable ||
+					!rl_find(dev, ext_adv->direct_addr_type,
+					ext_adv->direct_addr)) {
+				status = BT_HCI_ERR_INVALID_PARAMETERS;
+				goto exit_complete;
+			}
+		}
+
 		ext_adv->enable = cmd->enable;
 
 		if (!cmd->enable)
Signature · 1 line
2.31.1
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=515075

---Test result---

Test Summary:

CheckPatch                    PASS      0.28 seconds
GitLint                       PASS      0.10 seconds
Prep - Setup ELL              PASS      39.84 seconds
Build - Prep                  PASS      0.10 seconds
Build - Configure             PASS      6.93 seconds
Build - Make                  PASS      171.76 seconds
Make Check                    PASS      8.57 seconds
Make Distcheck                PASS      203.18 seconds
Build w/ext ELL - Configure   PASS      6.96 seconds
Build w/ext ELL - Make        PASS      161.92 seconds

Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf

##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint

##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL

##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build

##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree

##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree

##############################
Test: Make Check - PASS
Desc: Run 'make check'

##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution

##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration

##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration

---
Regards,
Linux Bluetooth

author maintainer
#2 lore raw

Hi,

Quoted 66 lines · On Tue, Jul 13, 2021 at 6:20 PM <[email protected]> wrote:

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=515075

---Test result---

Test Summary:

CheckPatch                    PASS      0.28 seconds
GitLint                       PASS      0.10 seconds
Prep - Setup ELL              PASS      39.84 seconds
Build - Prep                  PASS      0.10 seconds
Build - Configure             PASS      6.93 seconds
Build - Make                  PASS      171.76 seconds
Make Check                    PASS      8.57 seconds
Make Distcheck                PASS      203.18 seconds
Build w/ext ELL - Configure   PASS      6.96 seconds
Build w/ext ELL - Make        PASS      161.92 seconds

Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf

##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint

##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL

##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build

##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree

##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree

##############################
Test: Make Check - PASS
Desc: Run 'make check'

##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution

##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration

##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration

Quoted 3 lines

---
Regards,
Linux Bluetooth

Pushed.

Signature · 1 line
Luiz Augusto von Dentz