Skip to contentSkip to conversation

arm64: dts: imx8qm: add compatible string for usdhc3

PATCH Superseded Oliver Graute 2 participants 9 messages Jul 14, 2021 – Jul 15, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 arm64: dts: imx8qm: add compatible string for usdhc3

add compatible string for usdhc3

Cc Rob Herring <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Dong Aisheng <[email protected]>
---
 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi +4 -0
index 00ae820d5175..8c33edf0744f 100644
@@ -19,3 +19,7 @@
 &usdhc2 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
 };
+
+&usdhc3 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 arm64: dts: imx8qm: enabled watchdog

enable the watchdog

Cc Rob Herring <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Dong Aisheng <[email protected]>

---
need to enable CONFIG_IMX_SC_WDT

 arch/arm64/boot/dts/freescale/imx8qm.dtsi | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/freescale/imx8qm.dtsi +5 -0
index 87a4c3ec8861..b822f95f9baf 100644
@@ -169,6 +169,11 @@
 
 	};
 
+	watchdog {
+		compatible = "fsl,imx8qm-sc-wdt", "fsl,imx-sc-wdt";
+		timeout-sec = <60>;
+	};
+
 	/* sorted in register address */
 	#include "imx8-ss-dma.dtsi"
 	#include "imx8-ss-conn.dtsi"
Signature · 1 line
2.17.1
#2 lore raw

PATCH 1/1 arm64: dts: imx8qm: added System MMU

In reply to Oliver Graute

added node for System MMU

Cc Rob Herring <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Dong Aisheng <[email protected]>
---
 arch/arm64/boot/dts/freescale/imx8qm.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
arch/arm64/boot/dts/freescale/imx8qm.dtsi +17 -0
index 7efc0add74ea..fa827ed04e09 100644
@@ -140,6 +140,23 @@
 		method = "smc";
 	};
 
+	smmu: iommu@51400000 {
+		compatible = "arm,mmu-500";
+		interrupt-parent = <&gic>;
+		reg = <0 0x51400000 0 0x40000>;
+		#global-interrupts = <1>;
+		#iommu-cells = <2>;
+		interrupts = <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
Signature · 1 line
2.17.1
#3 lore raw

Re: [PATCH v1] arm64: dts: imx8qm: added System MMU

Quoted 1 line · Oliver Graute

added node for System MMU

Note that it's a bit of a dangerous game to enable an SMMU without the complete Stream ID topology for *all* its upstream devices also described, since CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT will ruin peoples' day. It might be more polite to add it in a disabled state until every "iommus" property has been filled in, so that people who do want to play with it for specific devices in the meantime can easily just flip the status (while taking the necessary precautions), but people who don't care won't be inadvertently affected regardless of their kernel config. I'm assuming an SMMU with 32 contexts has more than a single USB controller behind it...

Robin.

Quoted 39 lines
Cc Rob Herring <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Dong Aisheng <[email protected]>
---
  arch/arm64/boot/dts/freescale/imx8qm.dtsi | 17 +++++++++++++++++
  1 file changed, 17 insertions(+)
arch/arm64/boot/dts/freescale/imx8qm.dtsi +17 -0
index 7efc0add74ea..fa827ed04e09 100644
@@ -140,6 +140,23 @@
  		method = "smc";
  	};
 
+	smmu: iommu@51400000 {
+		compatible = "arm,mmu-500";
+		interrupt-parent = <&gic>;
+		reg = <0 0x51400000 0 0x40000>;
+		#global-interrupts = <1>;
+		#iommu-cells = <2>;
+		interrupts = <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>;
+	};
+
  	timer {
  		compatible = "arm,armv8-timer";
  		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
#4 lore raw

Re: [PATCH v1] arm64: dts: imx8qm: added System MMU

Quoted 12 lines · Robin Murphy
Quoted 1 line · Oliver Graute

added node for System MMU

Note that it's a bit of a dangerous game to enable an SMMU without the complete Stream ID topology for *all* its upstream devices also described, since CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT will ruin peoples' day. It might be more polite to add it in a disabled state until every "iommus" property has been filled in, so that people who do want to play with it for specific devices in the meantime can easily just flip the status (while taking the necessary precautions), but people who don't care won't be inadvertently affected regardless of their kernel config. I'm assuming an SMMU with 32 contexts has more than a single USB controller behind it...

thx for the explanation. So I will set this node to disabled state in next version of this patch.

Quoted 17 lines
Quoted 7 lines
  	};
arch/arm64/boot/dts/freescale/imx8qm.dtsi +5 -0
+	smmu: iommu@51400000 {
+		compatible = "arm,mmu-500";
+		interrupt-parent = <&gic>;
+		reg = <0 0x51400000 0 0x40000>;
+		#global-interrupts = <1>;

arch/arm64/boot/dts/freescale/imx8qm.dtsi line 157

Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8qm.dtsi +10 -0
+		#iommu-cells = <2>;
+		interrupts = <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>;
		status = "disabled";
Quoted 1 line

arch/arm64/boot/dts/freescale/imx8qm.dtsi line 158

Quoted 1 line
arch/arm64/boot/dts/freescale/imx8qm.dtsi +1 -0
+	};

Best regards,

Oliver

#5 lore raw

PATCH 1/1 arm64: dts: imx8qm: added pinctrl for pciea

In reply to Oliver Graute

added pinctrl for PCI Express

Cc Rob Herring <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Dong Aisheng <[email protected]>
---
 arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts +8 -0
index 331eec2dff01..466f8c5c3705 100644
@@ -174,6 +174,14 @@
 		>;
 	};
 
+	pinctrl_pciea: pcieagrp {
+		fsl,pins = <
+			IMX8QM_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27	0x06000021
+			IMX8QM_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28	0x04000021
+			IMX8QM_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO29	0x06000021
+		>;
+	};
+
 	pinctrl_rtc_epson_rx8900: rtc_epson_rx8900_grp {
 		fsl,pins = <
 			IMX8QM_SIM0_POWER_EN_DMA_I2C3_SDA	0xc600004c
Signature · 1 line
2.17.1
#6 lore raw

PATCH 1/1 arm64: dts: imx8: added usb nodes to imx8-ss-conn.dtsi

In reply to Oliver Graute

added usb nodes to imx8-ss-conn.dtsi

Cc Rob Herring <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Dong Aisheng <[email protected]>
---
 .../boot/dts/freescale/imx8-ss-conn.dtsi      | 84 +++++++++++++++++++
 1 file changed, 84 insertions(+)
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +84 -0
index 725349e297be..70778aeaacf0 100644
@@ -34,6 +34,90 @@ conn_subsys: bus@5b000000 {
 		clock-output-names = "conn_ipg_clk";
 	};
 
+	usb3phy: usb3-phy@5b160000 {
+		compatible = "nxp,salvo-phy";
+		reg = <0x5b160000 0x40000>;
+		clocks = <&usb3_lpcg 4>;
+		clock-names = "salvo_phy_clk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+		#phy-cells = <0>;
+	};
+
+	usb2_lpcg: clock-controller@5b270000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b270000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_ahb_clk>, <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clock-output-names = "usboh3_ahb_clk",
+				     "usboh3_phy_ipg_clk";
+		clock-names = "ahb", "ipg";
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+	};
+
+	usb3_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		/* bit-offset = <0 4 16 20 24 28>; */
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			<&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>;
+		clock-output-names = "usb3_bus_clk",
+				     "usb3_lpm_clk",
+				     "usb3_ipg_clk",
+				     "usb3_core_pclk",
+				     "usb3_phy_clk",
+				     "usb3_aclk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+	};
+
+	usbotg3: usb3@5b110000 {
+		compatible = "fsl,imx8qm-usb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		reg = <0x5B110000 0x10000>;
+
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
+			 <&usb3_lpcg IMX_LPCG_CLK_0>,
+			 <&usb3_lpcg IMX_LPCG_CLK_7>,
+			 <&usb3_lpcg IMX_LPCG_CLK_4>,
+			 <&usb3_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "usb3_lpm_clk", "usb3_bus_clk", "usb3_aclk",
+			"usb3_ipg_clk", "usb3_core_pclk";
+		assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>,
+			<&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>,
+			<&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		assigned-clock-rates = <125000000>, <12000000>, <250000000>;
+		power-domains = <&pd IMX_SC_R_USB_2>;
+		status = "disabled";
+
+		usbotg3_cdns3: cdns3 {
+			compatible = "cdns,usb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host", "peripheral", "otg";
+			reg = <0x5B130000 0x10000>,     /* memory area for HOST registers */
+				<0x5B140000 0x10000>,   /* memory area for DEVICE registers */
+				<0x5B120000 0x10000>;   /* memory area for OTG/DRD registers */
+			reg-names = "xhci", "dev", "otg";
+			phys = <&usb3phy>;
+			phy-names = "cdns3,usb2-phy";
+			status = "disabled";
+		};
+	};
+
 	usdhc1: mmc@5b010000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
Signature · 1 line
2.17.1
#7 lore raw

PATCH 1/1 arm64: dts: imx8: added usbotg3 node to imx8qm-ss-conn.dtsi

In reply to Oliver Graute

set iommus for usbotg3

Cc Rob Herring <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Dong Aisheng <[email protected]>
---
 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi +4 -0
index 8c33edf0744f..3737dbb49e77 100644
@@ -23,3 +23,7 @@
 &usdhc3 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
 };
+
+&usbotg3 {
+	iommus = <&smmu 0x4 0x7f80>;
+};
Signature · 1 line
2.17.1
#8 lore raw

PATCH 1/1 arm64: dts: imx8qm: added usb nodes to imx8qm.dtsi

In reply to Oliver Graute

added usb nodes to imx8qm.dtsi

Cc Rob Herring <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Dong Aisheng <[email protected]>
---
 arch/arm64/boot/dts/freescale/imx8qm.dtsi | 37 +++++++++++++++++++++++
 1 file changed, 37 insertions(+)
arch/arm64/boot/dts/freescale/imx8qm.dtsi +37 -0
index fd0e706ea011..acaaa1748fd5 100644
@@ -226,6 +226,43 @@
 
 	};
 
+	usbmisc1: usbmisc@5b0d0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0 0x5b0d0200 0 0x200>;
+	};
+
+	usbmisc2: usbmisc@5b0e0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x0 0x5b0e0200 0x0 0x200>;
+	};
+
+	usbphy1: usbphy@5b100000 {
+		compatible = "fsl,imx8qm-usbphy", "fsl,imx7ulp-usbphy",
+			"fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+		reg = <0 0x5b100000 0 0x1000>;
+		clocks = <&usb2_lpcg 1>;
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+		status = "disabled";
+	};
+
+	usbotg1: usb@5b0d0000 {
+		compatible = "fsl,imx8qm-usb", "fsl,imx7ulp-usb",
+			"fsl,imx27-usb";
+		reg = <0 0x5b0d0000 0 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy1>;
+		fsl,usbmisc = <&usbmisc1 0>;
+		clocks = <&usb2_lpcg 0>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		power-domains = <&pd IMX_SC_R_USB_0>;
+		status = "disabled";
+	};
+
 	watchdog {
 		compatible = "fsl,imx8qm-sc-wdt", "fsl,imx-sc-wdt";
 		timeout-sec = <60>;
Signature · 1 line
2.17.1