Skip to contentSkip to conversation

configs/stm32f469_disco: enable Linux DRM support

PATCH RESEND New Dario Binacchi 3 participants 5 messages Jul 16, 2021 – Aug 5, 2021 2 messages not in the archive Arm STM32

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/2 configs/stm32f469_disco: enable Linux DRM support

The patch to be applied to the Kernel has been informally approved by an ST maintainer as can be seen from [1] and [2].

After Linux boots, /dev/fb0 will be accessible. You can control the brightness of the display after enabling the framebuffer by running the following commands:

~ # echo 0 0 > /sys/class/graphics/fb0/pan
~ # echo 255 >/sys/class/backlight/40016c00.dsi.0/brightness

The brightness ranges from 0 to 255, as you can see running the command:

~ # cat /sys/class/backlight/40016c00.dsi.0/max_brightness

[1] https://lore.kernel.org/patchwork/patch/1450524/
[2] https://lore.kernel.org/patchwork/patch/1450964/

---
 .../stm32f469-disco/linux.fragment            |  7 +-
 ...-post-divisor-setup-for-I2S-SAI-PLLs.patch | 86 +++++++++++++++++++
 configs/stm32f469_disco_defconfig             |  1 +
 3 files changed, 93 insertions(+), 1 deletion(-)
 create mode 100644 board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch
board/stmicroelectronics/stm32f469-disco/linux.fragment +6 -1
index 90f5e8a8ff..ffa4d6205f 100644
@@ -1 +1,6 @@
-# CONFIG_XIP_KERNEL is not set
\ No newline at end of file
+# CONFIG_XIP_KERNEL is not set
+CONFIG_DRM=y
+CONFIG_DRM_STM=y
+CONFIG_DRM_STM_DSI=y
+CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch new file +86 -0

86 lines not on this page · raw message

configs/stm32f469_disco_defconfig +1 -0
index e538a664e2..1440aefd95 100644
@@ -1,6 +1,7 @@
 BR2_arm=y
 BR2_cortex_m4=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y
+BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f469-disco/patches"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh board/stmicroelectronics/stm32f469-disco/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/stmicroelectronics/stm32f469-disco/genimage.cfg"
Signature · 1 line
2.17.1
#1 lore raw

PATCH RESEND 2/2 configs/stm32f469_disco: add framebuffer test application

It's a test suite for Linux framebuffer. You can run, for example, fb-test-rect that displays random rectangles on the screen. But first, you need to enable the framebuffer:

~ # echo 0 0 > /sys/class/graphics/fb0/pan
~ # fb-test-rect

---
 configs/stm32f469_disco_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/stm32f469_disco_defconfig +1 -0
index 1440aefd95..b6de6748a0 100644
@@ -15,6 +15,7 @@ BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f469-disco"
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config"
+BR2_PACKAGE_FB_TEST_APP=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="32M"
 # BR2_TARGET_ROOTFS_TAR is not set
Signature · 1 line
2.17.1

A message that is not in the archive (sent off-list or not yet received): AM0PR10MB2817E905F5392BCEDF88E05EE3E19@AM0PR10MB2817.EURPRD10.PROD.OUTLOOK.COM

#3 lore raw

PATCH RESEND 2/2 configs/stm32f469_disco: add framebuffer test application

Ok, for me.

Regards
Christophe Priouzeau

Quoted 14 lines · Christophe PRIOUZEAU

------------------------------------------------------------------------
*From:* Dario Binacchi <[email protected]>
*Sent:* Friday, July 16, 2021 6:42 PM
*To:* buildroot at buildroot.org <[email protected]> *Cc:* Christophe PRIOUZEAU <[email protected]>; Dario Binacchi <[email protected]>
*Subject:* [RESEND, PATCH 2/2] configs/stm32f469_disco: add framebuffer test application
It's a test suite for Linux framebuffer. You can run, for example, fb-test-rect that displays random rectangles on the screen. But first, you need to enable the framebuffer:

Quoted 4 lines

~ # echo 0 0 > /sys/class/graphics/fb0/pan
~ # fb-test-rect

Quoted 23 lines
---
 ?configs/stm32f469_disco_defconfig | 1 +

?1 file changed, 1 insertion(+)

configs/stm32f469_disco_defconfig +1 -0
index 1440aefd95..b6de6748a0 100644
@@ -15,6 +15,7 @@ BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
 ?BR2_LINUX_KERNEL_DTS_SUPPORT=y
 ?BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f469-disco"
 ?BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config"
+BR2_PACKAGE_FB_TEST_APP=y
 ?BR2_TARGET_ROOTFS_EXT2=y
 ?BR2_TARGET_ROOTFS_EXT2_SIZE="32M"
 ?# BR2_TARGET_ROOTFS_TAR is not set
Signature · 4 lines
2.17.1


ST Restricted
Signature · 5 lines
Best regards / Cordialement,

Christophe Priouzeau | Tel: +33 244027320
STMicroelectronics
ST online: www.st.com<http://www.st.com/>

A message that is not in the archive (sent off-list or not yet received): AM0PR10MB281725F849F235E2E68BCF22E3E19@AM0PR10MB2817.EURPRD10.PROD.OUTLOOK.COM

#5 lore raw

PATCH RESEND 1/2 configs/stm32f469_disco: enable Linux DRM support

Ok, for me, just need to keep in memory to remove patch when the support of kernel 5.14 will be present.

Regards
Christophe Priouzeau

Quoted 22 lines · Christophe PRIOUZEAU

------------------------------------------------------------------------
*From:* Dario Binacchi <[email protected]>
*Sent:* Friday, July 16, 2021 6:42 PM
*To:* buildroot at buildroot.org <[email protected]> *Cc:* Christophe PRIOUZEAU <[email protected]>; Dario Binacchi <[email protected]>
*Subject:* [RESEND, PATCH 1/2] configs/stm32f469_disco: enable Linux DRM support
The patch to be applied to the Kernel has been informally approved by an ST maintainer as can be seen from [1] and [2].

After Linux boots, /dev/fb0 will be accessible. You can control the brightness of the display after enabling the framebuffer by running the following commands:

~ # echo 0 0 > /sys/class/graphics/fb0/pan
~ # echo 255 >/sys/class/backlight/40016c00.dsi.0/brightness

The brightness ranges from 0 to 255, as you can see running the command:

Quoted 8 lines

~ # cat /sys/class/backlight/40016c00.dsi.0/max_brightness

[1] https://lore.kernel.org/patchwork/patch/1450524/
<https://lore.kernel.org/patchwork/patch/1450524/>
[2] https://lore.kernel.org/patchwork/patch/1450964/
<https://lore.kernel.org/patchwork/patch/1450964/>

Quoted 143 lines

---

 ?.../stm32f469-disco/linux.fragment??????????? |? 7 +-
 ?...-post-divisor-setup-for-I2S-SAI-PLLs.patch | 86 +++++++++++++++++++
 ?configs/stm32f469_disco_defconfig???????????? |? 1 +

?3 files changed, 93 insertions(+), 1 deletion(-)
?create mode 100644
board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch

board/stmicroelectronics/stm32f469-disco/linux.fragment +6 -1
index 90f5e8a8ff..ffa4d6205f 100644
@@ -1 +1,6 @@
-# CONFIG_XIP_KERNEL is not set
\ No newline at end of file
+# CONFIG_XIP_KERNEL is not set
+CONFIG_DRM=y
+CONFIG_DRM_STM=y
+CONFIG_DRM_STM_DSI=y
+CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
(quoted diff) +0 -0

a/board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch b/board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch new file mode 100644
index 0000000000..34e398b81d
--- /dev/null
+++
b/board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch

(quoted diff) +26 -0
@@ -0,0 +1,86 @@
+From 463c3a0cbf18fd1bdd2c9a3c370c484b6cab97b5 Mon Sep 17 00:00:00 2001
+From: Dario Binacchi <[email protected]>
+Date: Mon, 21 Jun 2021 23:40:47 +0200
+Subject: [PATCH v2] clk: stm32f4: fix post divisor setup for I2S/SAI PLLs
+
+Enabling the framebuffer leads to a system hang. Running, as a debug
+hack, the store_pan() function in drivers/video/fbdev/core/fbsysfs.c
+without taking the console_lock, allows to see the crash backtrace on
+the serial line.
+
+~ # echo 0 0 > /sys/class/graphics/fb0/pan
+
+[??? 9.719414] Unhandled exception: IPSR = 00000005 LR = fffffff1
+[??? 9.726937] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
+[??? 9.733008] Hardware name: STM32 (Device Tree Support)
+[??? 9.738296] PC is at clk_gate_is_enabled+0x0/0x28
+[??? 9.743426] LR is at stm32f4_pll_div_set_rate+0xf/0x38
+[??? 9.748857] pc : [<0011e4be>]??? lr : [<0011f9e3>]??? psr: 0100000b
+[??? 9.755373] sp : 00bc7be0? ip : 00000000? fp : 001f3ac4
+[??? 9.760812] r10: 002610d0? r9 : 01efe920? r8 : 00540560
+[??? 9.766269] r7 : 02e7ddb0? r6 : 0173eed8? r5 : 00000000? r4 : 004027c0
+[??? 9.773081] r3 : 0011e4bf? r2 : 02e7ddb0? r1 : 0173eed8? r0 : 1d3267b8
+[??? 9.779911] xPSR: 0100000b
+[??? 9.782719] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
+[??? 9.788791] Hardware name: STM32 (Device Tree Support)
+[??? 9.794120] [<0000afa1>] (unwind_backtrace) from [<0000a33f>] 

(show_stack+0xb/0xc)
+[??? 9.802421] [<0000a33f>] (show_stack) from [<0000a8df>] (__invalid_entry+0x4b/0x4c)

board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch new file +31 -0
+
+The `pll_num' field in the post_div_data configuration contained a wrong
+value which also referenced an uninitialized hardware clock when
+clk_register_pll_div() was called.
+
+Fixes: 517633ef630e ("clk: stm32f4: Add post divisor for I2S & SAI PLLs")
+Signed-off-by: Dario Binacchi <[email protected]>
+
+---
+
+Changes in v2:
+- Change? 'u8 pll_num' from 'stm32f4_pll_post_div_data' structure into
+? 'int pll_idx'.
+
+ drivers/clk/clk-stm32f4.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
+index 18117ce5ff85..5c75e3d906c2 100644
+--- a/drivers/clk/clk-stm32f4.c
++++ b/drivers/clk/clk-stm32f4.c
+@@ -526,7 +526,7 @@ struct stm32f4_pll {
+
+ struct stm32f4_pll_post_div_data {
+??????? int idx;
+-????? u8 pll_num;
++????? int pll_idx;
+??????? const char *name;
+??????? const char *parent;
+??????? u8 flag;
+@@ -557,13 +557,13 @@ static const struct clk_div_table 

post_divr_table[] = {
+
+ #define MAX_POST_DIV 3
+ static const struct stm32f4_pll_post_div_data post_div_data[MAX_POST_DIV] = {
+-????? { CLK_I2SQ_PDIV, PLL_I2S, "plli2s-q-div", "plli2s-q", ++????? { CLK_I2SQ_PDIV, PLL_VCO_I2S, "plli2s-q-div", "plli2s-q", +??????????????? CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 0, 5, 0, NULL},

(quoted diff) +7 -0
+
+-????? { CLK_SAIQ_PDIV, PLL_SAI, "pllsai-q-div", "pllsai-q",
++????? { CLK_SAIQ_PDIV, PLL_VCO_SAI, "pllsai-q-div", "pllsai-q",
+??????????????? CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 8, 5, 0, NULL },
+
+-????? { NO_IDX, PLL_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
++????? { NO_IDX, PLL_VCO_SAI, "pllsai-r-div", "pllsai-r", 

CLK_SET_RATE_PARENT,
+??????????????? STM32F4_RCC_DCKCFGR, 16, 2, 0, post_divr_table },
+ };
+
+@@ -1774,7 +1774,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
+??????????????????????????????? post_div->width, +??????????????????????????????? post_div->flag_div, +??????????????????????????????? post_div->div_table, +-????????????????????????????? clks[post_div->pll_num], ++????????????????????????????? clks[post_div->pll_idx], +??????????????????????????????? &stm32f4_clk_lock);

board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch new file +5 -0
+
+??????????????? if (post_div->idx != NO_IDX)
+--
+2.17.1
+
configs/stm32f469_disco_defconfig +1 -0
index e538a664e2..1440aefd95 100644
@@ -1,6 +1,7 @@
 ?BR2_arm=y
 ?BR2_cortex_m4=y
 ?BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y
+BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f469-disco/patches"
 ?BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh board/stmicroelectronics/stm32f469-disco/post-build.sh"
 ?BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 ?BR2_ROOTFS_POST_SCRIPT_ARGS="-c 

board/stmicroelectronics/stm32f469-disco/genimage.cfg"

Signature · 4 lines
2.17.1


ST Restricted
Signature · 5 lines
Best regards / Cordialement,

Christophe Priouzeau | Tel: +33 244027320
STMicroelectronics
ST online: www.st.com<http://www.st.com/>
#6 lore raw

Hi All

Just a gentle ping, thanks.

Best regards.
Dario

Quoted 183 lines

Il 19/07/2021 10:42 Christophe Priouzeau <[email protected]> ha scritto:

Ok, for me, just need to keep in memory to remove patch when the support of kernel 5.14 will be present.

Regards
Christophe Priouzeau

Quoted 22 lines · Christophe PRIOUZEAU

------------------------------------------------------------------------
*From:* Dario Binacchi <[email protected]>
*Sent:* Friday, July 16, 2021 6:42 PM
*To:* [email protected] <[email protected]> *Cc:* Christophe PRIOUZEAU <[email protected]>; Dario Binacchi <[email protected]>
*Subject:* [RESEND, PATCH 1/2] configs/stm32f469_disco: enable Linux DRM support
The patch to be applied to the Kernel has been informally approved by an ST maintainer as can be seen from [1] and [2].

After Linux boots, /dev/fb0 will be accessible. You can control the brightness of the display after enabling the framebuffer by running the following commands:

~ # echo 0 0 > /sys/class/graphics/fb0/pan
~ # echo 255 >/sys/class/backlight/40016c00.dsi.0/brightness

The brightness ranges from 0 to 255, as you can see running the command:

Quoted 8 lines

~ # cat /sys/class/backlight/40016c00.dsi.0/max_brightness

[1] https://lore.kernel.org/patchwork/patch/1450524/
<https://lore.kernel.org/patchwork/patch/1450524/>
[2] https://lore.kernel.org/patchwork/patch/1450964/
<https://lore.kernel.org/patchwork/patch/1450964/>

Quoted 141 lines
---
  .../stm32f469-disco/linux.fragment            |  7 +-
  ...-post-divisor-setup-for-I2S-SAI-PLLs.patch | 86 +++++++++++++++++++
  configs/stm32f469_disco_defconfig             |  1 +
  3 files changed, 93 insertions(+), 1 deletion(-)

 create mode 100644
board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch

board/stmicroelectronics/stm32f469-disco/linux.fragment +6 -1
index 90f5e8a8ff..ffa4d6205f 100644
@@ -1 +1,6 @@
-# CONFIG_XIP_KERNEL is not set
\ No newline at end of file
+# CONFIG_XIP_KERNEL is not set
+CONFIG_DRM=y
+CONFIG_DRM_STM=y
+CONFIG_DRM_STM_DSI=y
+CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
(quoted diff) +0 -0

a/board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch b/board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch new file mode 100644
index 0000000000..34e398b81d
--- /dev/null
+++
b/board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch

board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch new file +26 -0
@@ -0,0 +1,86 @@
+From 463c3a0cbf18fd1bdd2c9a3c370c484b6cab97b5 Mon Sep 17 00:00:00 2001
+From: Dario Binacchi <[email protected]>
+Date: Mon, 21 Jun 2021 23:40:47 +0200
+Subject: [PATCH v2] clk: stm32f4: fix post divisor setup for I2S/SAI PLLs
+
+Enabling the framebuffer leads to a system hang. Running, as a debug
+hack, the store_pan() function in drivers/video/fbdev/core/fbsysfs.c
+without taking the console_lock, allows to see the crash backtrace on
+the serial line.
+
+~ # echo 0 0 > /sys/class/graphics/fb0/pan
+
+[    9.719414] Unhandled exception: IPSR = 00000005 LR = fffffff1
+[    9.726937] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
+[    9.733008] Hardware name: STM32 (Device Tree Support)
+[    9.738296] PC is at clk_gate_is_enabled+0x0/0x28
+[    9.743426] LR is at stm32f4_pll_div_set_rate+0xf/0x38
+[    9.748857] pc : [<0011e4be>]    lr : [<0011f9e3>]    psr: 0100000b
+[    9.755373] sp : 00bc7be0  ip : 00000000  fp : 001f3ac4
+[    9.760812] r10: 002610d0  r9 : 01efe920  r8 : 00540560
+[    9.766269] r7 : 02e7ddb0  r6 : 0173eed8  r5 : 00000000  r4 : 004027c0
+[    9.773081] r3 : 0011e4bf  r2 : 02e7ddb0  r1 : 0173eed8  r0 : 1d3267b8
+[    9.779911] xPSR: 0100000b
+[    9.782719] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
+[    9.788791] Hardware name: STM32 (Device Tree Support)
+[    9.794120] [<0000afa1>] (unwind_backtrace) from [<0000a33f>] 

(show_stack+0xb/0xc)
+[    9.802421] [<0000a33f>] (show_stack) from [<0000a8df>] (__invalid_entry+0x4b/0x4c)

board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch new file +31 -0
+
+The `pll_num' field in the post_div_data configuration contained a wrong
+value which also referenced an uninitialized hardware clock when
+clk_register_pll_div() was called.
+
+Fixes: 517633ef630e ("clk: stm32f4: Add post divisor for I2S & SAI PLLs")
+Signed-off-by: Dario Binacchi <[email protected]>
+
+---
+
+Changes in v2:
+- Change  'u8 pll_num' from 'stm32f4_pll_post_div_data' structure into
+  'int pll_idx'.
+
+ drivers/clk/clk-stm32f4.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
+index 18117ce5ff85..5c75e3d906c2 100644
+--- a/drivers/clk/clk-stm32f4.c
++++ b/drivers/clk/clk-stm32f4.c
+@@ -526,7 +526,7 @@ struct stm32f4_pll {
+
+ struct stm32f4_pll_post_div_data {
+        int idx;
+-      u8 pll_num;
++      int pll_idx;
+        const char *name;
+        const char *parent;
+        u8 flag;
+@@ -557,13 +557,13 @@ static const struct clk_div_table 

post_divr_table[] = {
+
+ #define MAX_POST_DIV 3
+ static const struct stm32f4_pll_post_div_data post_div_data[MAX_POST_DIV] = {
+-      { CLK_I2SQ_PDIV, PLL_I2S, "plli2s-q-div", "plli2s-q", ++      { CLK_I2SQ_PDIV, PLL_VCO_I2S, "plli2s-q-div", "plli2s-q", +                CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 0, 5, 0, NULL},

board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch new file +7 -0
+
+-      { CLK_SAIQ_PDIV, PLL_SAI, "pllsai-q-div", "pllsai-q",
++      { CLK_SAIQ_PDIV, PLL_VCO_SAI, "pllsai-q-div", "pllsai-q",
+                CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 8, 5, 0, NULL },
+
+-      { NO_IDX, PLL_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
++      { NO_IDX, PLL_VCO_SAI, "pllsai-r-div", "pllsai-r", 

CLK_SET_RATE_PARENT,
+                STM32F4_RCC_DCKCFGR, 16, 2, 0, post_divr_table },
+ };
+
+@@ -1774,7 +1774,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
+                                post_div->width,
+                                post_div->flag_div,
+                                post_div->div_table, +-                              clks[post_div->pll_num], ++                              clks[post_div->pll_idx], +                                &stm32f4_clk_lock);

board/stmicroelectronics/stm32f469-disco/patches/linux/0001-clk-stm32f4-fix-post-divisor-setup-for-I2S-SAI-PLLs.patch new file +5 -0
+
+                if (post_div->idx != NO_IDX)
+--
+2.17.1
+
configs/stm32f469_disco_defconfig +1 -0
index e538a664e2..1440aefd95 100644
@@ -1,6 +1,7 @@
  BR2_arm=y
  BR2_cortex_m4=y
  BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y
+BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f469-disco/patches"
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh board/stmicroelectronics/stm32f469-disco/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
  BR2_ROOTFS_POST_SCRIPT_ARGS="-c 

board/stmicroelectronics/stm32f469-disco/genimage.cfg"

Signature · 1 line
2.17.1
Quoted 10 lines
Quoted 2 lines

ST Restricted

Signature · 5 lines
Best regards / Cordialement,

Christophe Priouzeau | Tel: +33 244027320
STMicroelectronics
ST online: www.st.com<http://www.st.com/>

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot