rtc-cmos: remove stale REVISIT comments
PATCH 1/1 rtc-cmos: remove stale REVISIT comments
It appears mc146818_get_time() and mc146818_set_time() now correctly use the century register as specified in the ACPI FADT table. It is not clear what else could be done here.
These comments were introduced by
commit 7be2c7c96aff ("[PATCH] RTC framework driver for CMOS RTCs")
in 2007, which originally referenced function get_rtc_time() in include/asm-generic/rtc.h .
--- drivers/rtc/rtc-cmos.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)
drivers/rtc/rtc-cmos.c +1 -7
@@ -229,19 +229,13 @@ static int cmos_read_time(struct device *dev, struct rtc_time *t)if (!pm_trace_rtc_valid ())return -EIO ; -/* REVISIT: if the clock has a "century" register, use -* that instead of the heuristic in mc146818_get_time(). -* That'll make Y3K compatility (year > 2070) easy! -*/ mc146818_get_time (t);return 0 ; }static int cmos_set_time (struct device *dev,struct rtc_time *t) { -/* REVISIT: set the "century" register if available -* -* NOTE: this ignores the issue whereby updating the seconds +/* NOTE: this ignores the issue whereby updating the seconds * takes effect exactly 500ms after we write the register. * (Also queueing and other delays before we get this far.) */
Signature · 1 line
2.25.1
Quoted 10 lines · Mateusz Jończyk
It appears
mc146818_get_time()andmc146818_set_time()now correctly use the century register as specified in the ACPI FADT table. It is not clear what else could be done here.These comments were introduced by
commit7be2c7c96aff("[PATCH] RTC framework driver for CMOS RTCs")
in 2007, which originally referenced functionget_rtc_time()ininclude/asm-generic/rtc.h.[...]
Applied, thanks!
[1/1] rtc-cmos: remove stale REVISIT comments
commit: e1aba37569f0aa9c993f740828871e48eea79f98
Best regards,
Signature · 1 line
Alexandre Belloni <[email protected]>