4.19.198-rc1 review
Subsystems (5)
Greg Kroah-Hartman
maintainerPATCH 336/421 scsi: iscsi: Fix shost->max_id use
In reply to Greg Kroah-HartmanFrom: Mike Christie <[email protected]>
[ Upstream commit bdd4aad7ff92ae39c2e93c415bb6761cb8b584da ]
The iscsi offload drivers are setting the shost->max_id to the max number of sessions they support. The problem is that max_id is not the max number of targets but the highest identifier the targets can have. To use it to limit the number of targets we need to set it to max sessions - 1, or we can end up with a session we might not have preallocated resources for.
--- drivers/scsi/be2iscsi/be_main.c | 4 ++-- drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 +- drivers/scsi/cxgbi/libcxgbi.c | 4 ++-- drivers/scsi/qedi/qedi_main.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-)
drivers/scsi/be2iscsi/be_main.c +2 -2
@@ -423,7 +423,7 @@ static struct beiscsi_hba *beiscsi_hba_alloc(struct pci_dev *pcidev) "beiscsi_hba_alloc - iscsi_host_alloc failed\n");return NULL ; } - shost->max_id =BE2_MAX_SESSIONS ; + shost->max_id =BE2_MAX_SESSIONS -1 ; shost->max_channel =0 ; shost->max_cmd_len =BEISCSI_MAX_CMD_LEN ; shost->max_lun =BEISCSI_NUM_MAX_LUN ;
@@ -5336,7 +5336,7 @@ static int beiscsi_enable_port(struct beiscsi_hba *phba)/* Re-enable UER. If different TPE occurs then it is recoverable. */ beiscsi_set_uer_feature (phba); - phba->shost->max_id = phba->params.cxns_per_ctrl; + phba->shost->max_id = phba->params.cxns_per_ctrl -1 ; phba->shost->can_queue = phba->params.ios_per_ctrl; ret =beiscsi_init_port (phba);if (ret <0 ) {
drivers/scsi/bnx2i/bnx2i_iscsi.c +1 -1
@@ -793,7 +793,7 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)return NULL ; shost->dma_boundary = cnic->pcidev->dma_mask; shost->transportt = bnx2i_scsi_xport_template; - shost->max_id =ISCSI_MAX_CONNS_PER_HBA ; + shost->max_id =ISCSI_MAX_CONNS_PER_HBA -1 ; shost->max_channel =0 ; shost->max_lun =512 ; shost->max_cmd_len =16 ;
drivers/scsi/cxgbi/libcxgbi.c +2 -2
@@ -339,7 +339,7 @@ void cxgbi_hbas_remove(struct cxgbi_device *cdev)EXPORT_SYMBOL_GPL (cxgbi_hbas_remove);int cxgbi_hbas_add (struct cxgbi_device *cdev,u64 max_lun, -unsigned int max_id,struct scsi_host_template *sht, +unsigned int max_conns,struct scsi_host_template *sht,struct scsi_transport_template *stt) {struct cxgbi_hba *chba;
@@ -359,7 +359,7 @@ int cxgbi_hbas_add(struct cxgbi_device *cdev, u64 max_lun, shost->transportt = stt; shost->max_lun = max_lun; - shost->max_id = max_id; + shost->max_id = max_conns -1 ; shost->max_channel =0 ; shost->max_cmd_len =16 ;
drivers/scsi/qedi/qedi_main.c +1 -1
@@ -629,7 +629,7 @@ static struct qedi_ctx *qedi_host_alloc(struct pci_dev *pdev) goto exit_setup_shost; } - shost->max_id =QEDI_MAX_ISCSI_CONNS_PER_HBA ; + shost->max_id =QEDI_MAX_ISCSI_CONNS_PER_HBA -1 ; shost->max_channel =0 ; shost->max_lun = ~0 ; shost->max_cmd_len =16 ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 337/421 scsi: qedi: Fix null ref during abort handling
In reply to Greg Kroah-HartmanFrom: Mike Christie <[email protected]>
[ Upstream commit 5777b7f0f03ce49372203b6521631f62f2810c8f ]
If qedi_process_cmd_cleanup_resp finds the cmd it frees the work and sets list_tmf_work to NULL, so qedi_tmf_work should check if list_tmf_work is non-NULL when it wants to force cleanup.
--- drivers/scsi/qedi/qedi_fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/qedi/qedi_fw.c +1 -1
@@ -1466,7 +1466,7 @@ abort_ret: ldel_exit:spin_lock_bh (&qedi_conn->tmf_work_lock); -if (!qedi_cmd->list_tmf_work) { +if (qedi_cmd->list_tmf_work) {list_del_init (&list_work->list); qedi_cmd->list_tmf_work =NULL ;kfree (list_work);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 338/421 mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit 4700ef326556ed74aba188f12396740a8c1c21dd ]
This patch adds/modifies MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
--- drivers/mfd/da9052-i2c.c | 1 + drivers/mfd/stmpe-i2c.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/mfd/da9052-i2c.c +1 -0
@@ -118,6 +118,7 @@ static const struct i2c_device_id da9052_i2c_id[] = { {"da9053-bc", DA9053_BC}, {} }; +MODULE_DEVICE_TABLE (i2c, da9052_i2c_id);#ifdef CONFIG_OF static const struct of_device_id dialog_dt_ids[] = {
drivers/mfd/stmpe-i2c.c +1 -1
@@ -109,7 +109,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = { { "stmpe2403", STMPE2403 }, { } }; -MODULE_DEVICE_TABLE(i2c, stmpe_id); +MODULE_DEVICE_TABLE(i2c, stmpe_i2c_id); static struct i2c_driver stmpe_i2c_driver = { .driver = {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 339/421 s390/sclp_vt220: fix console name to match device
In reply to Greg Kroah-HartmanFrom: Valentin Vidic <[email protected]>
[ Upstream commit b7d91d230a119fdcc334d10c9889ce9c5e15118b ]
Console name reported in /proc/consoles:
ttyS1 -W- (EC p ) 4:65
does not match the char device name:
crw--w---- 1 root root 4, 65 May 17 12:18 /dev/ttysclp0
so debian-installer inside a QEMU s390x instance gets confused and fails to start with the following error:
steal-ctty: No such file or directory
--- arch/s390/kernel/setup.c | 2 +- drivers/s390/char/sclp_vt220.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
arch/s390/kernel/setup.c +1 -1
@@ -141,7 +141,7 @@ static void __init set_preferred_console(void)else if (CONSOLE_IS_3270 )add_preferred_console ("tty3270" ,0 ,NULL );else if (CONSOLE_IS_VT220 ) -add_preferred_console ("ttyS" ,1 ,NULL ); +add_preferred_console ("ttysclp" ,0 ,NULL );else if (CONSOLE_IS_HVC )add_preferred_console ("hvc" ,0 ,NULL ); }
drivers/s390/char/sclp_vt220.c +2 -2
@@ -35,8 +35,8 @@#define SCLP_VT220_MINOR 65#define SCLP_VT220_DRIVER_NAME "sclp_vt220"#define SCLP_VT220_DEVICE_NAME "ttysclp" -#define SCLP_VT220_CONSOLE_NAME "ttyS" -#define SCLP_VT220_CONSOLE_INDEX 1/* console=ttyS1 */ +#define SCLP_VT220_CONSOLE_NAME "ttysclp" +#define SCLP_VT220_CONSOLE_INDEX 0/* console=ttysclp0 */ /* Representation of a single write request */ struct sclp_vt220_request {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 340/421 selftests: timers: rtcpie: skip test if default RTC device does not exist
In reply to Greg Kroah-HartmanFrom: Po-Hsu Lin <[email protected]>
[ Upstream commit 0d3e5a057992bdc66e4dca2ca50b77fa4a7bd90e ]
This test will require /dev/rtc0, the default RTC device, or one specified by user to run. Since this default RTC is not guaranteed to exist on all of the devices, so check its existence first, otherwise skip this test with the kselftest skip code 4.
Without this patch this test will fail like this on a s390x zVM:
$ selftests: timers: rtcpie $ /dev/rtc0: No such file or directory not ok 1 selftests: timers: rtcpie # exit=22
With this patch:
$ selftests: timers: rtcpie $ Default RTC /dev/rtc0 does not exist. Test Skipped! not ok 9 selftests: timers: rtcpie # SKIP
Fixed up change log so "With this patch" text doesn't get dropped. Shuah Khan <[email protected]>
--- tools/testing/selftests/timers/rtcpie.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
tools/testing/selftests/timers/rtcpie.c +9 -1
@@ -18,6 +18,8 @@#include <stdlib.h> #include <errno.h> +#include "../kselftest.h" +/* * This expects the new RTC class driver framework, working with * clocks that will often not be clones of what the PC-AT had.
@@ -35,8 +37,14 @@ int main(int argc, char **argv)switch (argc) {case 2 : rtc = argv[1 ]; -/* FALLTHROUGH */ +break ;case 1 : + fd =open (default_rtc,O_RDONLY ); +if (fd ==-1 ) { +printf ("Default RTC %s does not exist. Test Skipped!\n" , default_rtc); +exit (KSFT_SKIP ); + } +close (fd);break ;default :fprintf (stderr,"usage: rtctest [rtcdev] [d]\n" );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 341/421 ALSA: sb: Fix potential double-free of CSP mixer elements
In reply to Greg Kroah-HartmanFrom: Takashi Iwai <[email protected]>
[ Upstream commit c305366a37441c2ac90b08711cb6f032b43672f2 ]
snd_sb_qsound_destroy() contains the calls of removing the previously created mixer controls, but it doesn't clear the pointers. As snd_sb_qsound_destroy() itself may be repeatedly called via ioctl, this could lead to double-free potentially.
Fix it by clearing the struct fields properly afterwards.
--- sound/isa/sb/sb16_csp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
sound/isa/sb/sb16_csp.c +6 -2
@@ -1086,10 +1086,14 @@ static void snd_sb_qsound_destroy(struct snd_sb_csp * p) card = p->chip->card;down_write (&card->controls_rwsem); -if (p->qsound_switch) +if (p->qsound_switch) {snd_ctl_remove (card, p->qsound_switch); -if (p->qsound_space) + p->qsound_switch =NULL ; + } +if (p->qsound_space) {snd_ctl_remove (card, p->qsound_space); + p->qsound_space =NULL ; + }up_write (&card->controls_rwsem);/* cancel pending transfer of QSound parameters */
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 342/421 powerpc/ps3: Add dma_mask to ps3_dma_region
In reply to Greg Kroah-HartmanFrom: Geoff Levand <[email protected]>
[ Upstream commit 9733862e50fdba55e7f1554e4286fcc5302ff28e ]
Commit f959dcd6ddfd29235030e8026471ac1b022ad2b0 (dma-direct: Fix potential NULL pointer dereference) added a null check on the dma_mask pointer of the kernel's device structure.
Add a dma_mask variable to the ps3_dma_region structure and set the device structure's dma_mask pointer to point to this new variable.
Fixes runtime errors like these:
# WARNING: Fixes tag on line 10 doesn't match correct format # WARNING: Fixes tag on line 10 doesn't match correct format
ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match
WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151 .dma_map_page_attrs+0x34/0x1e0 ps3flash sb_01: ps3stor_setup:193: map DMA region failed
--- arch/powerpc/include/asm/ps3.h | 2 ++ arch/powerpc/platforms/ps3/mm.c | 12 ++++++++++++ 2 files changed, 14 insertions(+)
arch/powerpc/include/asm/ps3.h +2 -0
@@ -83,6 +83,7 @@ struct ps3_dma_region_ops;* @bus_addr: The 'translated' bus address of the region. * @len: The length in bytes of the region. * @offset: The offset from the start of memory of the region. +* @dma_mask: Device dma_mask. * @ioid: The IOID of the device who owns this region * @chunk_list: Opaque variable used by the ioc page manager. * @region_ops: struct ps3_dma_region_ops - dma region operations
@@ -97,6 +98,7 @@ struct ps3_dma_region {enum ps3_dma_region_type region_type;unsigned long len;unsigned long offset; +u64 dma_mask;/* driver variables (set by ps3_dma_region_create) */ unsigned long bus_addr;
arch/powerpc/platforms/ps3/mm.c +12 -0
@@ -18,6 +18,7 @@* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/dma-mapping.h> #include <linux/kernel.h> #include <linux/export.h> #include <linux/memblock.h>
@@ -1130,6 +1131,7 @@ int ps3_dma_region_init(struct ps3_system_bus_device *dev, enum ps3_dma_region_type region_type, void *addr, unsigned long len) { unsigned long lpar_addr; +int result; lpar_addr = addr ?ps3_mm_phys_to_lpar (__pa (addr)) :0 ;
@@ -1141,6 +1143,16 @@ int ps3_dma_region_init(struct ps3_system_bus_device *dev, r->offset -= map.r1.offset; r->len = len ? len :_ALIGN_UP (map.total,1 << r->page_size); + dev->core.dma_mask = &r->dma_mask; + + result =dma_set_mask_and_coherent (&dev->core,DMA_BIT_MASK (32 )); + +if (result <0 ) { +dev_err (&dev->core,"%s:%d: dma_set_mask_and_coherent failed: %d\n" , + __func__, __LINE__, result); +return result; + } +switch (dev->dev_type) {case PS3_DEVICE_TYPE_SB : r->region_ops = (USE_DYNAMIC_DMA )
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 343/421 gpio: zynq: Check return value of pm_runtime_get_sync
In reply to Greg Kroah-HartmanFrom: Srinivas Neeli <[email protected]>
[ Upstream commit a51b2fb94b04ab71e53a71b9fad03fa826941254 ]
Return value of "pm_runtime_get_sync" API was neither captured nor checked. Fixed it by capturing the return value and then checking for any warning.
Addresses-Coverity: "check_return"
--- drivers/gpio/gpio-zynq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/gpio/gpio-zynq.c +4 -1
@@ -919,8 +919,11 @@ err_pm_dis:static int zynq_gpio_remove (struct platform_device *pdev) {struct zynq_gpio *gpio =platform_get_drvdata (pdev); +int ret; -pm_runtime_get_sync (&pdev->dev); + ret =pm_runtime_get_sync (&pdev->dev); +if (ret <0 ) +dev_warn (&pdev->dev,"pm_runtime_get_sync() Failed\n" );gpiochip_remove (&gpio->chip);clk_disable_unprepare (gpio->clk);device_set_wakeup_capable (&pdev->dev,0 );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 344/421 ALSA: ppc: fix error return code in snd_pmac_probe()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit 80b9c1be567c3c6bbe0d4b290af578e630485b5d ]
If snd_pmac_tumbler_init() or snd_pmac_tumbler_post_init() fails, snd_pmac_probe() need return error code.
--- sound/ppc/powermac.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
sound/ppc/powermac.c +5 -1
@@ -90,7 +90,11 @@ static int snd_pmac_probe(struct platform_device *devptr)sprintf (card->shortname,"PowerMac %s" , name_ext);sprintf (card->longname,"%s (Dev %d) Sub-frame %d" , card->shortname, chip->device_id, chip->subframe); -if (snd_pmac_tumbler_init (chip) <0 ||snd_pmac_tumbler_post_init () <0 ) + err =snd_pmac_tumbler_init (chip); +if (err <0 ) + goto __error; + err =snd_pmac_tumbler_post_init (); +if (err <0 ) goto __error;break ;case PMAC_AWACS :
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 345/421 selftests/powerpc: Fix "no_handler" EBB selftest
In reply to Greg Kroah-HartmanFrom: Athira Rajeev <[email protected]>
[ Upstream commit 45677c9aebe926192e59475b35a1ff35ff2d4217 ]
The "no_handler_test" in ebb selftests attempts to read the PMU registers twice via helper function "dump_ebb_state". First dump is just before closing of event and the second invocation is done after closing of the event. The original intention of second dump_ebb_state was to dump the state of registers at the end of the test when the counters are frozen. But this will be achieved with the first call itself since sample period is set to low value and PMU will be frozen by then. Hence patch removes the dump which was done before closing of the event.
--- tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c | 2 -- 1 file changed, 2 deletions(-)
tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c +0 -2
@@ -50,8 +50,6 @@ static int no_handler_test(void)event_close (&event); -dump_ebb_state (); -/* The real test is that we never took an EBB at 0x0 */ return 0 ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 346/421 gpio: pca953x: Add support for the On Semi pca9655
In reply to Greg Kroah-HartmanFrom: Peter Robinson <[email protected]>
[ Upstream commit 6d49b3a0f351925b5ea5047166c112b7590b918a ]
The On Semi pca9655 is a 16 bit variant of the On Semi pca9654 GPIO expander, with 16 GPIOs and interrupt functionality.
--- drivers/gpio/gpio-pca953x.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpio/gpio-pca953x.c +1 -0
@@ -980,6 +980,7 @@ static const struct of_device_id pca953x_dt_ids[] = { { .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), }, { .compatible = "onnn,pca9654", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "onnn,pca9655", .data = OF_953X(16, PCA_INT), }, { .compatible = "exar,xra1202", .data = OF_953X( 8, 0), }, { }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 347/421 ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing()
In reply to Greg Kroah-HartmanFrom: Zhen Lei <[email protected]>
[ Upstream commit 7d3865a10b9ff2669c531d5ddd60bf46b3d48f1e ]
When devm_kcalloc() fails, the error code -ENOMEM should be returned instead of -EINVAL.
--- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/soc-core.c +1 -1
@@ -3510,7 +3510,7 @@ int snd_soc_of_parse_audio_routing(struct snd_soc_card *card,if (!routes) {dev_err (card->dev,"ASoC: Could not allocate DAPM route table\n" ); -return -EINVAL ; +return -ENOMEM ; }for (i =0 ; i < num_routes; i++) {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 348/421 Input: hideep - fix the uninitialized use in hideep_nvm_unlock()
In reply to Greg Kroah-HartmanFrom: Yizhuo Zhai <[email protected]>
[ Upstream commit cac7100d4c51c04979dacdfe6c9a5e400d3f0a27 ]
Inside function hideep_nvm_unlock(), variable "unmask_code" could be uninitialized if hideep_pgm_r_reg() returns error, however, it is used in the later if statement after an "and" operation, which is potentially unsafe.
--- drivers/input/touchscreen/hideep.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/input/touchscreen/hideep.c +10 -3
@@ -364,13 +364,16 @@ static int hideep_enter_pgm(struct hideep_ts *ts)return -EIO ; } -static void hideep_nvm_unlock (struct hideep_ts *ts) +static int hideep_nvm_unlock (struct hideep_ts *ts) {u32 unmask_code; +int error;hideep_pgm_w_reg (ts,HIDEEP_FLASH_CFG ,HIDEEP_NVM_SFR_RPAGE ); -hideep_pgm_r_reg (ts,0x0000000C , &unmask_code); + error =hideep_pgm_r_reg (ts,0x0000000C , &unmask_code);hideep_pgm_w_reg (ts,HIDEEP_FLASH_CFG ,HIDEEP_NVM_DEFAULT_PAGE ); +if (error) +return error;/* make it unprotected code */ unmask_code &= ~HIDEEP_PROT_MODE ;
@@ -387,6 +390,8 @@ static void hideep_nvm_unlock(struct hideep_ts *ts)NVM_W_SFR (HIDEEP_NVM_MASK_OFS , ts->nvm_mask);SET_FLASH_HWCONTROL ();hideep_pgm_w_reg (ts,HIDEEP_FLASH_CFG ,HIDEEP_NVM_DEFAULT_PAGE ); + +return 0 ; }static int hideep_check_status (struct hideep_ts *ts)
@@ -465,7 +470,9 @@ static int hideep_program_nvm(struct hideep_ts *ts,u32 addr =0 ;int error; -hideep_nvm_unlock (ts); + error =hideep_nvm_unlock (ts); +if (error) +return error;while (ucode_len >0 ) { xfer_len =min_t (size_t, ucode_len,HIDEEP_NVM_PAGE_SIZE );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 349/421 ALSA: bebob: add support for ToneWeal FW66
In reply to Greg Kroah-HartmanFrom: Takashi Sakamoto <[email protected]>
[ Upstream commit 50ebe56222bfa0911a932930f9229ee5995508d9 ]
A user of FFADO project reported the issue of ToneWeal FW66. As a result, the device is identified as one of applications of BeBoB solution.
I note that in the report the device returns contradictory result in plug discovery process for audio subunit. Fortunately ALSA BeBoB driver doesn't perform it thus it's likely to handle the device without issues.
I receive no reaction to test request for this patch yet, however it would be worth to add support for it.
daniel@gibbonmoon:/sys/bus/firewire/devices/fw1$ grep -r . * Binary file config_rom matches dev:244:1 guid:0x0023270002000000 hardware_version:0x000002 is_local:0 model:0x020002 model_name:FW66 power/runtime_active_time:0 power/runtime_active_kids:0 power/runtime_usage:0 power/runtime_status:unsupported power/async:disabled power/runtime_suspended_time:0 power/runtime_enabled:disabled power/control:auto subsystem/drivers_autoprobe:1 uevent:MAJOR=244 uevent:MINOR=1 uevent:DEVNAME=fw1 units:0x00a02d:0x010001 vendor:0x002327 vendor_name:ToneWeal fw1.0/uevent:MODALIAS=ieee1394:ven00002327mo00020002sp0000A02Dver00010001 fw1.0/power/runtime_active_time:0 fw1.0/power/runtime_active_kids:0 fw1.0/power/runtime_usage:0 fw1.0/power/runtime_status:unsupported fw1.0/power/async:disabled fw1.0/power/runtime_suspended_time:0 fw1.0/power/runtime_enabled:disabled fw1.0/power/control:auto fw1.0/model:0x020002 fw1.0/rom_index:15 fw1.0/specifier_id:0x00a02d fw1.0/model_name:FW66 fw1.0/version:0x010001 fw1.0/modalias:ieee1394:ven00002327mo00020002sp0000A02Dver00010001
Cc: Daniel Jozsef <[email protected]>
Reference: https://lore.kernel.org/alsa-devel/20200119164335.GA11974@workstation/
--- sound/firewire/Kconfig | 1 + sound/firewire/bebob/bebob.c | 3 +++ 2 files changed, 4 insertions(+)
sound/firewire/Kconfig +1 -0
@@ -109,6 +109,7 @@ config SND_BEBOB * M-Audio Ozonic/NRV10/ProfireLightBridge * M-Audio FireWire 1814/ProjectMix IO * Digidesign Mbox 2 Pro + * ToneWeal FW66 To compile this driver as a module, choose M here: the module will be called snd-bebob.
sound/firewire/bebob/bebob.c +3 -0
@@ -60,6 +60,7 @@ static DECLARE_BITMAP(devices_used, SNDRV_CARDS);#define VEN_MAUDIO1 0x00000d6c#define VEN_MAUDIO2 0x000007f5#define VEN_DIGIDESIGN 0x00a07e +#define OUI_SHOUYO 0x002327#define MODEL_FOCUSRITE_SAFFIRE_BOTH 0x00000000#define MODEL_MAUDIO_AUDIOPHILE_BOTH 0x00010060
@@ -513,6 +514,8 @@ static const struct ieee1394_device_id bebob_id_table[] = { &maudio_special_spec),/* Digidesign Mbox 2 Pro */ SND_BEBOB_DEV_ENTRY (VEN_DIGIDESIGN ,0x0000a9 , &spec_normal), +// Toneweal FW66. + SND_BEBOB_DEV_ENTRY(OUI_SHOUYO, 0x020002, &spec_normal),/* IDs are unknown but able to be supported */ /* Apogee, Mini-ME Firewire */ /* Apogee, Mini-DAC Firewire */
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 350/421 usb: gadget: f_hid: fix endianness issue with descriptors
In reply to Greg Kroah-HartmanFrom: Ruslan Bilovol <[email protected]>
[ Upstream commit 33cb46c4676d01956811b68a29157ea969a5df70 ]
Running sparse checker it shows warning message about incorrect endianness used for descriptor initialization:
| f_hid.c:91:43: warning: incorrect type in initializer (different base types) | f_hid.c:91:43: expected restricted __le16 [usertype] bcdHID | f_hid.c:91:43: got int
Fixing issue with cpu_to_le16() macro, however this is not a real issue as the value is the same both endians.
--- drivers/usb/gadget/function/f_hid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/gadget/function/f_hid.c +1 -1
@@ -88,7 +88,7 @@ static struct usb_interface_descriptor hidg_interface_desc = {static struct hid_descriptor hidg_desc = { .bLength =sizeof hidg_desc, .bDescriptorType =HID_DT_HID , - .bcdHID =0x0101 , + .bcdHID =cpu_to_le16 (0x0101 ), .bCountryCode =0x00 , .bNumDescriptors =0x1 ,/*.desc[0].bDescriptorType = DYNAMIC */
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 351/421 usb: gadget: hid: fix error return code in hid_bind()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit 88693f770bb09c196b1eb5f06a484a254ecb9924 ]
Fix to return a negative error code from the error handling case instead of 0.
--- drivers/usb/gadget/legacy/hid.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/gadget/legacy/hid.c +3 -1
@@ -171,8 +171,10 @@ static int hid_bind(struct usb_composite_dev *cdev)struct usb_descriptor_header *usb_desc; usb_desc =usb_otg_descriptor_alloc (gadget); -if (!usb_desc) +if (!usb_desc) { + status = -ENOMEM ; goto put; + }usb_otg_descriptor_init (gadget, usb_desc); otg_desc[0 ] = usb_desc; otg_desc[1 ] =NULL ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 352/421 powerpc/boot: Fixup device-tree on little endian
In reply to Greg Kroah-HartmanFrom: Benjamin Herrenschmidt <[email protected]>
[ Upstream commit c93f80849bdd9b45d834053ae1336e28f0026c84 ]
This fixes the core devtree.c functions and the ns16550 UART backend.
--- arch/powerpc/boot/devtree.c | 59 +++++++++++++++++++++---------------- arch/powerpc/boot/ns16550.c | 9 ++++-- 2 files changed, 41 insertions(+), 27 deletions(-)
arch/powerpc/boot/devtree.c +34 -25
@@ -17,6 +17,7 @@#include "string.h" #include "stdio.h" #include "ops.h" +#include "of.h" void dt_fixup_memory (u64 start,u64 size) {
@@ -27,21 +28,25 @@ void dt_fixup_memory(u64 start, u64 size) root =finddevice ("/" );if (getprop (root,"#address-cells" , &naddr,sizeof (naddr)) <0 ) naddr =2 ; +else + naddr =be32_to_cpu (naddr);if (naddr <1 || naddr >2 )fatal ("Can't cope with #address-cells == %d in /\n\r" , naddr);if (getprop (root,"#size-cells" , &nsize,sizeof (nsize)) <0 ) nsize =1 ; +else + nsize =be32_to_cpu (nsize);if (nsize <1 || nsize >2 )fatal ("Can't cope with #size-cells == %d in /\n\r" , nsize); i =0 ;if (naddr ==2 ) - memreg[i++] = start >>32 ; - memreg[i++] = start &0xffffffff ; + memreg[i++] =cpu_to_be32 (start >>32 ); + memreg[i++] =cpu_to_be32 (start &0xffffffff );if (nsize ==2 ) - memreg[i++] = size >>32 ; - memreg[i++] = size &0xffffffff ; + memreg[i++] =cpu_to_be32 (size >>32 ); + memreg[i++] =cpu_to_be32 (size &0xffffffff ); memory =finddevice ("/memory" );if (! memory) {
@@ -49,9 +54,9 @@ void dt_fixup_memory(u64 start, u64 size)setprop_str (memory,"device_type" ,"memory" ); } -printf ("Memory <- <0x%x" , memreg[0 ]); +printf ("Memory <- <0x%x" ,be32_to_cpu (memreg[0 ]));for (i =1 ; i < (naddr + nsize); i++) -printf (" 0x%x" , memreg[i]); +printf (" 0x%x" ,be32_to_cpu (memreg[i]));printf ("> (%ldMB)\n\r" , (unsigned long )(size >>20 ));setprop (memory,"reg" , memreg, (naddr + nsize)*sizeof (u32));
@@ -69,10 +74,10 @@ void dt_fixup_cpu_clocks(u32 cpu, u32 tb, u32 bus)printf ("CPU bus-frequency <- 0x%x (%dMHz)\n\r" , bus,MHZ (bus));while ((devp =find_node_by_devtype (devp,"cpu" ))) { -setprop_val (devp,"clock-frequency" , cpu); -setprop_val (devp,"timebase-frequency" , tb); +setprop_val (devp,"clock-frequency" ,cpu_to_be32 (cpu)); +setprop_val (devp,"timebase-frequency" ,cpu_to_be32 (tb));if (bus >0 ) -setprop_val (devp,"bus-frequency" , bus); +setprop_val (devp,"bus-frequency" ,cpu_to_be32 (bus)); } timebase_period_ns =1000000000 / tb;
@@ -84,7 +89,7 @@ void dt_fixup_clock(const char *path, u32 freq)if (devp) {printf ("%s: clock-frequency <- %x (%dMHz)\n\r" , path, freq,MHZ (freq)); -setprop_val (devp,"clock-frequency" , freq); +setprop_val (devp,"clock-frequency" ,cpu_to_be32 (freq)); } }
@@ -137,8 +142,12 @@ void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize) {if (getprop (node,"#address-cells" , naddr,4 ) !=4 ) *naddr =2 ; +else + *naddr =be32_to_cpu (*naddr);if (getprop (node,"#size-cells" , nsize,4 ) !=4 ) *nsize =1 ; +else + *nsize =be32_to_cpu (*nsize); }static void copy_val (u32 *dest,u32 *src,int naddr)
@@ -167,9 +176,9 @@ static int add_reg(u32 *reg, u32 *add, int naddr)int i, carry =0 ;for (i =MAX_ADDR_CELLS -1 ; i >=MAX_ADDR_CELLS - naddr; i--) { -u64 tmp = (u64 )reg[i] + add[i] + carry; +u64 tmp = (u64 )be32_to_cpu (reg[i]) +be32_to_cpu (add[i]) + carry; carry = tmp >>32 ; - reg[i] = (u32 )tmp; + reg[i] =cpu_to_be32 ((u32 )tmp); }return !carry;
@@ -184,18 +193,18 @@ static int compare_reg(u32 *reg, u32 *range, u32 *rangesize)u32 end;for (i =0 ; i <MAX_ADDR_CELLS ; i++) { -if (reg[i] < range[i]) +if (be32_to_cpu (reg[i]) <be32_to_cpu (range[i]))return 0 ; -if (reg[i] > range[i]) +if (be32_to_cpu (reg[i]) >be32_to_cpu (range[i]))break ; }for (i =0 ; i <MAX_ADDR_CELLS ; i++) { - end = range[i] + rangesize[i]; + end =be32_to_cpu (range[i]) +be32_to_cpu (rangesize[i]); -if (reg[i] < end) +if (be32_to_cpu (reg[i]) < end)break ; -if (reg[i] > end) +if (be32_to_cpu (reg[i]) > end)return 0 ; }
@@ -244,7 +253,6 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,return 0 ;dt_get_reg_format (parent, &naddr, &nsize); -if (nsize >2 )return 0 ;
@@ -256,10 +264,10 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,copy_val (last_addr, prop_buf + offset, naddr); - ret_size = prop_buf[offset + naddr]; + ret_size =be32_to_cpu (prop_buf[offset + naddr]);if (nsize ==2 ) { ret_size <<=32 ; - ret_size |= prop_buf[offset + naddr +1 ]; + ret_size |=be32_to_cpu (prop_buf[offset + naddr +1 ]); }for (;;) {
@@ -282,7 +290,6 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, offset =find_range (last_addr, prop_buf, prev_naddr, naddr, prev_nsize, buflen /4 ); -if (offset <0 )return 0 ;
@@ -300,8 +307,7 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,if (naddr >2 )return 0 ; - ret_addr = ((u64 )last_addr[2 ] <<32 ) | last_addr[3 ]; - + ret_addr = ((u64 )be32_to_cpu (last_addr[2 ]) <<32 ) |be32_to_cpu (last_addr[3 ]);if (sizeof (void *) ==4 && (ret_addr >=0x100000000ULL || ret_size >0x100000000ULL || ret_addr + ret_size >0x100000000ULL ))
@@ -354,11 +360,14 @@ int dt_is_compatible(void *node, const char *compat)int dt_get_virtual_reg (void *node,void **addr,int nres) {unsigned long xaddr; -int n; +int n, i; n =getprop (node,"virtual-reg" , addr, nres *4 ); -if (n >0 ) +if (n >0 ) { +for (i =0 ; i < n/4 ; i ++) + ((u32 *)addr)[i] =be32_to_cpu (((u32 *)addr)[i]);return n /4 ; + }for (n =0 ; n < nres; n++) {if (!dt_xlate_reg (node, n, &xaddr,NULL ))
arch/powerpc/boot/ns16550.c +7 -2
@@ -15,6 +15,7 @@#include "stdio.h" #include "io.h" #include "ops.h" +#include "of.h" #define UART_DLL 0/* Out: Divisor Latch Low */ #define UART_DLM 1/* Out: Divisor Latch High */
@@ -58,16 +59,20 @@ int ns16550_console_init(void *devp, struct serial_console_data *scdp)int n;u32 reg_offset; -if (dt_get_virtual_reg (devp, (void **)®_base,1 ) <1 ) +if (dt_get_virtual_reg (devp, (void **)®_base,1 ) <1 ) { +printf ("virt reg parse fail...\r\n" );return -1 ; + } n =getprop (devp,"reg-offset" , ®_offset,sizeof (reg_offset));if (n ==sizeof (reg_offset)) - reg_base += reg_offset; + reg_base +=be32_to_cpu (reg_offset); n =getprop (devp,"reg-shift" , ®_shift,sizeof (reg_shift));if (n !=sizeof (reg_shift)) reg_shift =0 ; +else + reg_shift =be32_to_cpu (reg_shift); scdp->open = ns16550_open; scdp->putc = ns16550_putc;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 353/421 backlight: lm3630a: Fix return code of .update_status() callback
In reply to Greg Kroah-HartmanFrom: Uwe Kleine-König <[email protected]>
[ Upstream commit b9481a667a90ec739995e85f91f3672ca44d6ffa ]
According to <linux/backlight.h> .update_status() is supposed to return 0 on success and a negative error code otherwise. Adapt lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to actually do it.
While touching that also add the error code to the failure message.
--- drivers/video/backlight/lm3630a_bl.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/video/backlight/lm3630a_bl.c +6 -6
@@ -184,7 +184,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)if ((pwm_ctrl &LM3630A_PWM_BANK_A ) !=0 ) {lm3630a_pwm_ctrl (pchip, bl->props.brightness, bl->props.max_brightness); -return bl->props.brightness; +return 0 ; }/* disable sleep */
@@ -204,8 +204,8 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)return 0 ; out_i2c_err: -dev_err (pchip->dev,"i2c failed to access\n" ); -return bl->props.brightness; +dev_err (pchip->dev,"i2c failed to access (%pe)\n" ,ERR_PTR (ret)); +return ret; }static int lm3630a_bank_a_get_brightness (struct backlight_device *bl)
@@ -261,7 +261,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)if ((pwm_ctrl &LM3630A_PWM_BANK_B ) !=0 ) {lm3630a_pwm_ctrl (pchip, bl->props.brightness, bl->props.max_brightness); -return bl->props.brightness; +return 0 ; }/* disable sleep */
@@ -281,8 +281,8 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)return 0 ; out_i2c_err: -dev_err (pchip->dev,"i2c failed to access REG_CTRL\n" ); -return bl->props.brightness; +dev_err (pchip->dev,"i2c failed to access (%pe)\n" ,ERR_PTR (ret)); +return ret; }static int lm3630a_bank_b_get_brightness (struct backlight_device *bl)
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 354/421 ALSA: hda: Add IRQ check for platform_get_irq()
In reply to Greg Kroah-HartmanFrom: Jiajun Cao <[email protected]>
[ Upstream commit 8c13212443230d03ff25014514ec0d53498c0912 ]
The function hda_tegra_first_init() neglects to check the return value after executing platform_get_irq().
hda_tegra_first_init() should check the return value (if negative error number) for errors so as to not pass a negative value to the devm_request_irq().
Fix it by adding a check for the return value irq_id.
--- sound/pci/hda/hda_tegra.c | 3 +++ 1 file changed, 3 insertions(+)
sound/pci/hda/hda_tegra.c +3 -0
@@ -363,6 +363,9 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev)unsigned short gcap;int irq_id =platform_get_irq (pdev,0 ); +if (irq_id <0 ) +return irq_id; + err =hda_tegra_init_chip (chip, pdev);if (err)return err;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 355/421 staging: rtl8723bs: fix macro value for 2.4Ghz only device
In reply to Greg Kroah-HartmanFrom: Fabio Aiuto <[email protected]>
[ Upstream commit 6d490a27e23c5fb79b766530016ab8665169498e ]
fix IQK_Matrix_Settings_NUM macro value to 14 which is the max channel number value allowed in a 2.4Ghz device.
--- drivers/staging/rtl8723bs/hal/odm.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/staging/rtl8723bs/hal/odm.h +1 -4
@@ -197,10 +197,7 @@ typedef struct _ODM_RATE_ADAPTIVE {#define AVG_THERMAL_NUM 8#define IQK_Matrix_REG_NUM 8 -#define IQK_Matrix_Settings_NUM (14 + 24 + 21)/* Channels_2_4G_NUM -* + Channels_5G_20M_NUM -* + Channels_5G -*/ +#define IQK_Matrix_Settings_NUM 14/* Channels_2_4G_NUM */ #define DM_Type_ByFW 0#define DM_Type_ByDriver 1
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 356/421 intel_th: Wait until port is in reset before programming it
In reply to Greg Kroah-HartmanFrom: Alexander Shishkin <[email protected]>
[ Upstream commit ab1afed701d2db7eb35c1a2526a29067a38e93d1 ]
Some devices don't drain their pipelines if we don't make sure that the corresponding output port is in reset before programming it for a new trace capture, resulting in bits of old trace appearing in the new trace capture. Fix that by explicitly making sure the reset is asserted before programming new trace capture.
--- drivers/hwtracing/intel_th/core.c | 17 +++++++++++++++++ drivers/hwtracing/intel_th/gth.c | 16 ++++++++++++++++ drivers/hwtracing/intel_th/intel_th.h | 3 +++ 3 files changed, 36 insertions(+)
drivers/hwtracing/intel_th/core.c +17 -0
@@ -215,6 +215,22 @@ static ssize_t port_show(struct device *dev, struct device_attribute *attr,static DEVICE_ATTR_RO (port); +static void intel_th_trace_prepare (struct intel_th_device *thdev) +{ +struct intel_th_device *hub =to_intel_th_hub (thdev); +struct intel_th_driver *hubdrv =to_intel_th_driver (hub->dev.driver); + +if (hub->type !=INTEL_TH_SWITCH ) +return ; + +if (thdev->type !=INTEL_TH_OUTPUT ) +return ; + +pm_runtime_get_sync (&thdev->dev); + hubdrv->prepare (hub, &thdev->output); +pm_runtime_put (&thdev->dev); +} +static int intel_th_output_activate (struct intel_th_device *thdev) { struct intel_th_driver *thdrv =
@@ -235,6 +251,7 @@ static int intel_th_output_activate(struct intel_th_device *thdev)if (ret) goto fail_put; +intel_th_trace_prepare (thdev);if (thdrv->activate) ret = thdrv->activate (thdev);else
drivers/hwtracing/intel_th/gth.c +16 -0
@@ -513,6 +513,21 @@ static void gth_tscu_resync(struct gth_device *gth)iowrite32 (reg, gth->base +REG_TSCU_TSUCTRL ); } +static void intel_th_gth_prepare (struct intel_th_device *thdev, +struct intel_th_output *output) +{ +struct gth_device *gth =dev_get_drvdata (&thdev->dev); +int count; + +/* +* Wait until the output port is in reset before we start +* programming it. +*/ +for (count =GTH_PLE_WAITLOOP_DEPTH ; + count && !(gth_output_get (gth, output->port) &BIT (5 )); count--) +cpu_relax (); +} +/** * intel_th_gth_enable() - enable tracing to an output device * @thdev: GTH device
@@ -734,6 +749,7 @@ static struct intel_th_driver intel_th_gth_driver = { .assign = intel_th_gth_assign, .unassign = intel_th_gth_unassign, .set_output = intel_th_gth_set_output, + .prepare = intel_th_gth_prepare, .enable = intel_th_gth_enable, .disable = intel_th_gth_disable, .driver = {
drivers/hwtracing/intel_th/intel_th.h +3 -0
@@ -134,6 +134,7 @@ intel_th_output_assigned(struct intel_th_device *thdev)* @remove: remove method * @assign: match a given output type device against available outputs * @unassign: deassociate an output type device from an output port +* @prepare: prepare output port for tracing * @enable: enable tracing for a given output device * @disable: disable tracing for a given output device * @irq: interrupt callback
@@ -155,6 +156,8 @@ struct intel_th_driver { struct intel_th_device *othdev);void (*unassign)(struct intel_th_device *thdev,struct intel_th_device *othdev); +void (*prepare)(struct intel_th_device *thdev, +struct intel_th_output *output);void (*enable)(struct intel_th_device *thdev,struct intel_th_output *output); void (*disable)(struct intel_th_device *thdev,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 357/421 i2c: core: Disable client irq on reboot/shutdown
In reply to Greg Kroah-HartmanFrom: Dmitry Torokhov <[email protected]>
[ Upstream commit b64210f2f7c11c757432ba3701d88241b2b98fb1 ]
If an i2c client receives an interrupt during reboot or shutdown it may be too late to service it by making an i2c transaction on the bus because the i2c controller has already been shutdown. This can lead to system hangs if the i2c controller tries to make a transfer that is doomed to fail because the access to the i2c pins is already shut down, or an iommu translation has been torn down so i2c controller register access doesn't work.
Let's simply disable the irq if there isn't a shutdown callback for an i2c client when there is an irq associated with the device. This will make sure that irqs don't come in later than the time that we can handle it. We don't do this if the i2c client device already has a shutdown callback because presumably they're doing the right thing and quieting the device so irqs don't come in after the shutdown callback returns.
[[email protected]: Dropped newline, added commit text, added interrupt.h for robot build error]
--- drivers/i2c/i2c-core-base.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/i2c/i2c-core-base.c +3 -0
@@ -32,6 +32,7 @@#include <linux/i2c-smbus.h> #include <linux/idr.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/irqflags.h> #include <linux/jump_label.h> #include <linux/kernel.h>
@@ -457,6 +458,8 @@ static void i2c_device_shutdown(struct device *dev) driver =to_i2c_driver (dev->driver);if (driver->shutdown) driver->shutdown (client); +else if (client->irq >0 ) +disable_irq (client->irq); }static void i2c_client_dev_release (struct device *dev)
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 358/421 lib/decompress_unlz4.c: correctly handle zero-padding around initrds.
In reply to Greg Kroah-HartmanFrom: Dimitri John Ledkov <[email protected]>
[ Upstream commit 2c484419efc09e7234c667aa72698cb79ba8d8ed ]
lz4 compatible decompressor is simple. The format is underspecified and relies on EOF notification to determine when to stop. Initramfs buffer format[1] explicitly states that it can have arbitrary number of zero padding. Thus when operating without a fill function, be extra careful to ensure that sizes less than 4, or apperantly empty chunksizes are treated as EOF.
To test this I have created two cpio initrds, first a normal one, main.cpio. And second one with just a single /test-file with content "second" second.cpio. Then i compressed both of them with gzip, and with lz4 -l. Then I created a padding of 4 bytes (dd if=/dev/zero of=pad4 bs=1 count=4). To create four testcase initrds:
1) main.cpio.gzip + extra.cpio.gzip = pad0.gzip
2) main.cpio.lz4 + extra.cpio.lz4 = pad0.lz4
3) main.cpio.gzip + pad4 + extra.cpio.gzip = pad4.gzip
4) main.cpio.lz4 + pad4 + extra.cpio.lz4 = pad4.lz4
The pad4 test-cases replicate the initrd load by grub, as it pads and aligns every initrd it loads.
All of the above boot, however /test-file was not accessible in the initrd for the testcase #4, as decoding in lz4 decompressor failed. Also an error message printed which usually is harmless.
Whith a patched kernel, all of the above testcases now pass, and /test-file is accessible.
This fixes lz4 initrd decompress warning on every boot with grub. And more importantly this fixes inability to load multiple lz4 compressed initrds with grub. This patch has been shipping in Ubuntu kernels since January 2021.
[1] ./Documentation/driver-api/early-userspace/buffer-format.rst
--- lib/decompress_unlz4.c | 8 ++++++++ 1 file changed, 8 insertions(+)
lib/decompress_unlz4.c +8 -0
@@ -115,6 +115,9 @@ STATIC inline int INIT unlz4(u8 *input, long in_len,error ("data corrupted" ); goto exit_2; } + }else if (size <4 ) { +/* empty or end-of-file */ + goto exit_3; } chunksize =get_unaligned_le32 (inp);
@@ -128,6 +131,10 @@ STATIC inline int INIT unlz4(u8 *input, long in_len,continue ; } +if (!fill && chunksize ==0 ) { +/* empty or end-of-file */ + goto exit_3; + }if (posp) *posp +=4 ;
@@ -187,6 +194,7 @@ STATIC inline int INIT unlz4(u8 *input, long in_len, } } +exit_3: ret =0 ; exit_2:if (!input)
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 359/421 pwm: spear: Dont modify HW state in .remove callback
In reply to Greg Kroah-HartmanFrom: Uwe Kleine-König <[email protected]>
[ Upstream commit b601a18f12383001e7a8da238de7ca1559ebc450 ]
A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver.
So drop the hardware modification from the .remove() callback.
--- drivers/pwm/pwm-spear.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/pwm/pwm-spear.c +0 -4
@@ -231,10 +231,6 @@ static int spear_pwm_probe(struct platform_device *pdev)static int spear_pwm_remove (struct platform_device *pdev) {struct spear_pwm_chip *pc =platform_get_drvdata (pdev); -int i; - -for (i =0 ; i <NUM_PWM ; i++) -pwm_disable (&pc->chip.pwms[i]);/* clk was prepared in probe, hence unprepare it here */ clk_unprepare (pc->clk);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 360/421 power: supply: ab8500: Avoid NULL pointers
In reply to Greg Kroah-HartmanFrom: Linus Walleij <[email protected]>
[ Upstream commit 5bcb5087c9dd3dca1ff0ebd8002c5313c9332b56 ]
Sometimes the code will crash because we haven't enabled AC or USB charging and thus not created the corresponding psy device. Fix it by checking that it is there before notifying.
--- drivers/power/supply/ab8500_charger.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
drivers/power/supply/ab8500_charger.c +17 -1
@@ -407,6 +407,14 @@ disable_otp:static void ab8500_power_supply_changed (struct ab8500_charger *di,struct power_supply *psy) { +/* +* This happens if we get notifications or interrupts and +* the platform has been configured not to support one or +* other type of charging. +*/ +if (!psy) +return ; +if (di->autopower_cfg) { if (!di->usb.charger_connected && !di->ac.charger_connected &&
@@ -433,7 +441,15 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,if (!connected) di->flags.vbus_drop_end = false; -sysfs_notify (&di->usb_chg.psy->dev.kobj,NULL ,"present" ); +/* +* Sometimes the platform is configured not to support +* USB charging and no psy has been created, but we still +* will get these notifications. +*/ +if (di->usb_chg.psy) { +sysfs_notify (&di->usb_chg.psy->dev.kobj,NULL , +"present" ); + }if (connected) {mutex_lock (&di->charger_attached_mutex);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 361/421 power: supply: max17042: Do not enforce (incorrect) interrupt trigger type
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 7fbf6b731bca347700e460d94b130f9d734b33e9 ]
Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 17047/77693 datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed.
--- drivers/power/supply/max17042_battery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/power/supply/max17042_battery.c +1 -1
@@ -1083,7 +1083,7 @@ static int max17042_probe(struct i2c_client *client, }if (client->irq) { -unsigned int flags =IRQF_TRIGGER_FALLING |IRQF_ONESHOT ; +unsigned int flags =IRQF_ONESHOT ;/* * On ACPI systems the IRQ may be handled by ACPI-event code,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 362/421 power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE
In reply to Greg Kroah-HartmanFrom: Bixuan Cui <[email protected]>
[ Upstream commit ed3443fb4df4e140a22f65144546c8a8e1e27f4e ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
--- drivers/power/reset/gpio-poweroff.c | 1 + 1 file changed, 1 insertion(+)
drivers/power/reset/gpio-poweroff.c +1 -0
@@ -88,6 +88,7 @@ static const struct of_device_id of_gpio_poweroff_match[] = { { .compatible = "gpio-poweroff", }, {}, }; +MODULE_DEVICE_TABLE (of, of_gpio_poweroff_match);static struct platform_driver gpio_poweroff_driver = { .probe = gpio_poweroff_probe,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 363/421 ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1
In reply to Greg Kroah-HartmanFrom: Nick Desaulniers <[email protected]>
[ Upstream commit 8b95a7d90ce8160ac5cffd5bace6e2eba01a871e ]
There's a few instructions that GAS infers operands but Clang doesn't; from what I can tell the Arm ARM doesn't say these are optional.
F5.1.257 TBB, TBH T1 Halfword variant
F5.1.238 STREXD T1 variant
F5.1.84 LDREXD T1 variant
--- arch/arm/probes/kprobes/test-thumb.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
arch/arm/probes/kprobes/test-thumb.c +5 -5
@@ -444,21 +444,21 @@ void kprobe_thumb32_test_cases(void) "3: mvn r0, r0 \n\t" "2: nop \n\t") - TEST_RX("tbh [pc, r",7, (9f-(1f+4))>>1,"]", + TEST_RX("tbh [pc, r",7, (9f-(1f+4))>>1,", lsl #1]", "9: \n\t" ".short (2f-1b-4)>>1 \n\t" ".short (3f-1b-4)>>1 \n\t" "3: mvn r0, r0 \n\t" "2: nop \n\t") - TEST_RX("tbh [pc, r",12, ((9f-(1f+4))>>1)+1,"]", + TEST_RX("tbh [pc, r",12, ((9f-(1f+4))>>1)+1,", lsl #1]", "9: \n\t" ".short (2f-1b-4)>>1 \n\t" ".short (3f-1b-4)>>1 \n\t" "3: mvn r0, r0 \n\t" "2: nop \n\t") -TEST_RRX ("tbh [r" ,1 ,9f ,", r" ,14 ,1 ,"]" , +TEST_RRX ("tbh [r" ,1 ,9f ,", r" ,14 ,1 ,", lsl #1]" ,"9: \n\t" ".short (2f-1b-4)>>1 \n\t" ".short (3f-1b-4)>>1 \n\t"
@@ -471,10 +471,10 @@ void kprobe_thumb32_test_cases(void) TEST_UNSUPPORTED("strexb r0, r1, [r2]") TEST_UNSUPPORTED("strexh r0, r1, [r2]") - TEST_UNSUPPORTED("strexd r0, r1, [r2]") + TEST_UNSUPPORTED("strexd r0, r1, r2, [r2]") TEST_UNSUPPORTED("ldrexb r0, [r1]") TEST_UNSUPPORTED("ldrexh r0, [r1]") - TEST_UNSUPPORTED("ldrexd r0, [r1]") + TEST_UNSUPPORTED("ldrexd r0, r1, [r1]")TEST_GROUP ("Data-processing (shifted register) and (modified immediate)" )
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 364/421 watchdog: Fix possible use-after-free in wdt_startup()
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit c08a6b31e4917034f0ed0cb457c3bb209576f542 ]
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
--- drivers/watchdog/sbc60xxwdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/watchdog/sbc60xxwdt.c +1 -1
@@ -152,7 +152,7 @@ static void wdt_startup(void)static void wdt_turnoff (void ) {/* Stop the timer */ -del_timer (&timer); +del_timer_sync (&timer);inb_p (wdt_stop);pr_info ("Watchdog timer is now disabled...\n" ); }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 365/421 watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit 90b7c141132244e8e49a34a4c1e445cce33e07f4 ]
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
--- drivers/watchdog/sc520_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/watchdog/sc520_wdt.c +1 -1
@@ -190,7 +190,7 @@ static int wdt_startup(void)static int wdt_turnoff (void ) {/* Stop the timer */ -del_timer (&timer); +del_timer_sync (&timer);/* Stop the watchdog */ wdt_config (0 );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 366/421 watchdog: Fix possible use-after-free by calling del_timer_sync()
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit d0212f095ab56672f6f36aabc605bda205e1e0bf ]
This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
--- drivers/watchdog/lpc18xx_wdt.c | 2 +- drivers/watchdog/w83877f_wdt.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/watchdog/lpc18xx_wdt.c +1 -1
@@ -301,7 +301,7 @@ static int lpc18xx_wdt_remove(struct platform_device *pdev)struct lpc18xx_wdt_dev *lpc18xx_wdt =platform_get_drvdata (pdev);dev_warn (&pdev->dev,"I quit now, hardware will probably reboot!\n" ); -del_timer (&lpc18xx_wdt->timer); +del_timer_sync (&lpc18xx_wdt->timer);watchdog_unregister_device (&lpc18xx_wdt->wdt_dev);clk_disable_unprepare (lpc18xx_wdt->wdt_clk);
drivers/watchdog/w83877f_wdt.c +1 -1
@@ -170,7 +170,7 @@ static void wdt_startup(void)static void wdt_turnoff (void ) {/* Stop the timer */ -del_timer (&timer); +del_timer_sync (&timer);wdt_change (WDT_DISABLE );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 367/421 watchdog: iTCO_wdt: Account for rebooting on second timeout
In reply to Greg Kroah-HartmanFrom: Jan Kiszka <[email protected]>
[ Upstream commit cb011044e34c293e139570ce5c01aed66a34345c ]
This was already attempted to fix via 1fccb73011ea: If the BIOS did not enable TCO SMIs, the timer definitely needs to trigger twice in order to cause a reboot. If TCO SMIs are on, as well as SMIs in general, we can continue to assume that the BIOS will perform a reboot on the first timeout.
QEMU with its ICH9 and related BIOS falls into the former category, currently taking twice the configured timeout in order to reboot the machine. For iTCO version that fall under turn_SMI_watchdog_clear_off, this is also true and was currently only addressed for v1, irrespective of the turn_SMI_watchdog_clear_off value.
--- drivers/watchdog/iTCO_wdt.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/watchdog/iTCO_wdt.c +9 -3
@@ -75,6 +75,8 @@#define TCOBASE (p) ((p)->tco_res->start)/* SMI Control and Enable Register */ #define SMI_EN (p) ((p)->smi_res->start) +#define TCO_EN (1 << 13) +#define GBL_SMI_EN (1 << 0)#define TCO_RLD (p) (TCOBASE(p) + 0x00)/* TCO Timer Reload/Curr. Value */ #define TCOv1_TMR (p) (TCOBASE(p) + 0x01)/* TCOv1 Timer Initial Value*/
@@ -330,8 +332,12 @@ static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t) tmrval =seconds_to_ticks (p, t); -/* For TCO v1 the timer counts down twice before rebooting */ -if (p->iTCO_version ==1 ) +/* +* If TCO SMIs are off, the timer counts down twice before rebooting. +* Otherwise, the BIOS generally reboots when the SMI triggers. +*/ +if (p->smi_res && + (SMI_EN (p) & (TCO_EN |GBL_SMI_EN )) != (TCO_EN |GBL_SMI_EN )) tmrval /=2 ;/* from the specs: */
@@ -493,7 +499,7 @@ static int iTCO_wdt_probe(struct platform_device *pdev)* Disables TCO logic generating an SMI# */ val32 =inl (SMI_EN (p)); - val32 &=0xffffdfff ;/* Turn off SMI clearing watchdog */ + val32 &= ~TCO_EN ;/* Turn off SMI clearing watchdog */ outl (val32,SMI_EN (p)); }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 368/421 x86/fpu: Return proper error codes from user access functions
In reply to Greg Kroah-HartmanFrom: Thomas Gleixner <[email protected]>
[ Upstream commit aee8c67a4faa40a8df4e79316dbfc92d123989c1 ]
When *RSTOR from user memory raises an exception, there is no way to differentiate them. That's bad because it forces the slow path even when the failure was not a fault. If the operation raised eg. #GP then going through the slow path is pointless.
Use _ASM_EXTABLE_FAULT() which stores the trap number and let the exception fixup return the negated trap number as error.
This allows to separate the fast path and let it handle faults directly and avoid the slow path for all other exceptions.
--- arch/x86/include/asm/fpu/internal.h | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)
arch/x86/include/asm/fpu/internal.h +12 -7
@@ -103,6 +103,7 @@ static inline void fpstate_init_fxstate(struct fxregs_state *fx) }extern void fpstate_sanitize_xstate (struct fpu *fpu); +/* Returns 0 or the negated trap number, which results in -EFAULT for #PF */ #define user_insn(insn, output, input...) \ ({ \ int err; \
@@ -110,14 +111,14 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);might_fault (); \ \ asm volatile(ASM_STAC "\n" \ - "1:" #insn "\n\t" \ + "1: " #insn "\n" \ "2: " ASM_CLAC "\n" \ ".section .fixup,\"ax\"\n" \ - "3: movl $-1,%[err]\n" \ + "3: negl %%eax\n" \ " jmp 2b\n" \ ".previous\n" \ - _ASM_EXTABLE(1b, 3b) \ - : [err] "=r" (err), output \ + _ASM_EXTABLE_FAULT(1b, 3b) \ + : [err] "=a" (err), output \ : "0"(0), input); \ err; \ })
@@ -221,16 +222,20 @@ static inline void copy_fxregs_to_kernel(struct fpu *fpu)#define XRSTOR ".byte " REX_PREFIX "0x0f,0xae,0x2f"#define XRSTORS ".byte " REX_PREFIX "0x0f,0xc7,0x1f" +/* +* After this @err contains 0 on success or the negated trap number when +* the operation raises an exception. For faults this results in -EFAULT. +*/ #define XSTATE_OP (op, st, lmask, hmask, err) \ asm volatile("1:" op "\n\t" \ "xor %[err], %[err]\n" \ "2:\n\t" \ ".pushsection .fixup,\"ax\"\n\t" \ - "3: movl $-2,%[err]\n\t" \ + "3: negl %%eax\n\t" \ "jmp 2b\n\t" \ ".popsection\n\t" \ - _ASM_EXTABLE(1b, 3b) \ - : [err] "=r" (err) \ + _ASM_EXTABLE_FAULT(1b, 3b) \ + : [err] "=a" (err) \ : "D" (st), "m" (*st), "a" (lmask), "d" (hmask) \ : "memory")
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 369/421 PCI: tegra: Add missing MODULE_DEVICE_TABLE
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit 7bf475a4614a9722b9b989e53184a02596cf16d1 ]
Add missing MODULE_DEVICE_TABLE definition so we generate correct modalias for automatic loading of this driver when it is built as a module.
--- drivers/pci/controller/pci-tegra.c | 1 + 1 file changed, 1 insertion(+)
drivers/pci/controller/pci-tegra.c +1 -0
@@ -2245,6 +2245,7 @@ static const struct of_device_id tegra_pcie_of_match[] = { { .compatible = "nvidia,tegra20-pcie", .data = &tegra20_pcie }, { }, }; +MODULE_DEVICE_TABLE (of, tegra_pcie_of_match);static void *tegra_pcie_ports_seq_start (struct seq_file *s,loff_t *pos) {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 370/421 orangefs: fix orangefs df output.
In reply to Greg Kroah-HartmanFrom: Mike Marshall <[email protected]>
[ Upstream commit 0fdec1b3c9fbb5e856a40db5993c9eaf91c74a83 ]
Orangefs df output is whacky. Walt Ligon suggested this might fix it. It seems way more in line with reality now...
--- fs/orangefs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/orangefs/super.c +1 -1
@@ -195,7 +195,7 @@ static int orangefs_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_bavail = (sector_t ) new_op->downcall.resp.statfs.blocks_avail; buf->f_files = (sector_t ) new_op->downcall.resp.statfs.files_total; buf->f_ffree = (sector_t ) new_op->downcall.resp.statfs.files_avail; - buf->f_frsize = sb->s_blocksize; + buf->f_frsize =0 ; out_op_release:op_release (new_op);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 371/421 ceph: remove bogus checks and WARN_ONs from ceph_set_page_dirty
In reply to Greg Kroah-HartmanFrom: Jeff Layton <[email protected]>
[ Upstream commit 22d41cdcd3cfd467a4af074165357fcbea1c37f5 ]
The checks for page->mapping are odd, as set_page_dirty is an address_space operation, and I don't see where it would be called on a non-pagecache page.
The warning about the page lock also seems bogus. The comment over set_page_dirty() says that it can be called without the page lock in some rare cases. I don't think we want to warn if that's the case.
--- fs/ceph/addr.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)
fs/ceph/addr.c +1 -9
@@ -75,10 +75,6 @@ static int ceph_set_page_dirty(struct page *page)struct inode *inode;struct ceph_inode_info *ci;struct ceph_snap_context *snapc; -int ret; - -if (unlikely (!mapping)) -return !TestSetPageDirty (page);if (PageDirty (page)) { dout("%p set_page_dirty %p idx %lu -- already dirty\n",
@@ -124,11 +120,7 @@ static int ceph_set_page_dirty(struct page *page) page->private = (unsigned long )snapc;SetPagePrivate (page); - ret =__set_page_dirty_nobuffers (page); -WARN_ON (!PageLocked (page)); -WARN_ON (!page->mapping); - -return ret; +return __set_page_dirty_nobuffers (page); }/*
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 372/421 NFS: nfs_find_open_context() may only select open files
In reply to Greg Kroah-HartmanFrom: Trond Myklebust <[email protected]>
[ Upstream commit e97bc66377bca097e1f3349ca18ca17f202ff659 ]
If a file has already been closed, then it should not be selected to support further I/O.
--- fs/nfs/inode.c | 4 ++++ include/linux/nfs_fs.h | 1 + 2 files changed, 5 insertions(+)
fs/nfs/inode.c +4 -0
@@ -1038,6 +1038,7 @@ EXPORT_SYMBOL_GPL(nfs_inode_attach_open_context);void nfs_file_set_open_context (struct file *filp,struct nfs_open_context *ctx) { filp->private_data =get_nfs_open_context (ctx); +set_bit (NFS_CONTEXT_FILE_OPEN , &ctx->flags);if (list_empty (&ctx->list))nfs_inode_attach_open_context (ctx); }
@@ -1057,6 +1058,8 @@ struct nfs_open_context *nfs_find_open_context(struct inode *inode, struct rpc_ccontinue ;if ((pos->mode & (FMODE_READ |FMODE_WRITE )) != mode)continue ; +if (!test_bit (NFS_CONTEXT_FILE_OPEN , &pos->flags)) +continue ; ctx =get_nfs_open_context (pos);break ; }
@@ -1071,6 +1074,7 @@ void nfs_file_clear_open_context(struct file *filp)if (ctx) {struct inode *inode =d_inode (ctx->dentry); +clear_bit (NFS_CONTEXT_FILE_OPEN , &ctx->flags);/* * We fatal error on write before. Try to writeback * every page again.
include/linux/nfs_fs.h +1 -0
@@ -78,6 +78,7 @@ struct nfs_open_context {#define NFS_CONTEXT_RESEND_WRITES (1)#define NFS_CONTEXT_BAD (2)#define NFS_CONTEXT_UNLOCK (3) +#define NFS_CONTEXT_FILE_OPEN (4)int error;struct list_head list;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 373/421 power: supply: charger-manager: add missing MODULE_DEVICE_TABLE
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit 073b5d5b1f9cc94a3eea25279fbafee3f4f5f097 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
--- drivers/power/supply/charger-manager.c | 1 + 1 file changed, 1 insertion(+)
drivers/power/supply/charger-manager.c +1 -0
@@ -1484,6 +1484,7 @@ static const struct of_device_id charger_manager_match[] = { }, {}, }; +MODULE_DEVICE_TABLE (of, charger_manager_match);static struct charger_desc *of_cm_parse_desc (struct device *dev) {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 374/421 power: supply: ab8500: add missing MODULE_DEVICE_TABLE
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit dfe52db13ab8d24857a9840ec7ca75eef800c26c ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
--- drivers/power/supply/ab8500_btemp.c | 1 + drivers/power/supply/ab8500_charger.c | 1 + drivers/power/supply/ab8500_fg.c | 1 + 3 files changed, 3 insertions(+)
drivers/power/supply/ab8500_btemp.c +1 -0
@@ -1120,6 +1120,7 @@ static const struct of_device_id ab8500_btemp_match[] = { { .compatible = "stericsson,ab8500-btemp", }, { }, }; +MODULE_DEVICE_TABLE (of, ab8500_btemp_match);static struct platform_driver ab8500_btemp_driver = { .probe = ab8500_btemp_probe,
drivers/power/supply/ab8500_charger.c +1 -0
@@ -3639,6 +3639,7 @@ static const struct of_device_id ab8500_charger_match[] = { { .compatible = "stericsson,ab8500-charger", }, { }, }; +MODULE_DEVICE_TABLE (of, ab8500_charger_match);static struct platform_driver ab8500_charger_driver = { .probe = ab8500_charger_probe,
drivers/power/supply/ab8500_fg.c +1 -0
@@ -3221,6 +3221,7 @@ static const struct of_device_id ab8500_fg_match[] = { { .compatible = "stericsson,ab8500-fg", }, { }, }; +MODULE_DEVICE_TABLE (of, ab8500_fg_match);static struct platform_driver ab8500_fg_driver = { .probe = ab8500_fg_probe,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 375/421 pwm: tegra: Dont modify HW state in .remove callback
In reply to Greg Kroah-HartmanFrom: Uwe Kleine-König <[email protected]>
[ Upstream commit 86f7fa71cd830d18d7ebcaf719dffd5ddfe1acdd ]
A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver.
So drop the hardware modification from the .remove() callback.
--- drivers/pwm/pwm-tegra.c | 13 ------------- 1 file changed, 13 deletions(-)
drivers/pwm/pwm-tegra.c +0 -13
@@ -245,7 +245,6 @@ static int tegra_pwm_probe(struct platform_device *pdev)static int tegra_pwm_remove (struct platform_device *pdev) {struct tegra_pwm_chip *pc =platform_get_drvdata (pdev); -unsigned int i;int err;if (WARN_ON (!pc))
@@ -255,18 +254,6 @@ static int tegra_pwm_remove(struct platform_device *pdev)if (err <0 )return err; -for (i =0 ; i < pc->chip.npwm; i++) { -struct pwm_device *pwm = &pc->chip.pwms[i]; - -if (!pwm_is_enabled (pwm)) -if (clk_prepare_enable (pc->clk) <0 ) -continue ; - -pwm_writel (pc, i,0 ); - -clk_disable_unprepare (pc->clk); - } -reset_control_assert (pc->rst);clk_disable_unprepare (pc->clk);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 376/421 ACPI: AMBA: Fix resource name in /proc/iomem
In reply to Greg Kroah-HartmanFrom: Liguang Zhang <[email protected]>
[ Upstream commit 7718629432676b5ebd9a32940782fe297a0abf8d ]
In function amba_handler_attach(), dev->res.name is initialized by amba_device_alloc. But when address_found is false, dev->res.name is assigned to null value, which leads to wrong resource name display in /proc/iomem, "<BAD>" is seen for those resources.
--- drivers/acpi/acpi_amba.c | 1 + 1 file changed, 1 insertion(+)
drivers/acpi/acpi_amba.c +1 -0
@@ -70,6 +70,7 @@ static int amba_handler_attach(struct acpi_device *adev,case IORESOURCE_MEM :if (!address_found) { dev->res = *rentry->res; + dev->res.name =dev_name (&dev->dev); address_found = true; }break ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 377/421 ACPI: video: Add quirk for the Dell Vostro 3350
In reply to Greg Kroah-HartmanFrom: Hans de Goede <[email protected]>
[ Upstream commit 9249c32ec9197e8d34fe5179c9e31668a205db04 ]
The Dell Vostro 3350 ACPI video-bus device reports spurious ACPI_VIDEO_NOTIFY_CYCLE events resulting in spurious KEY_SWITCHVIDEOMODE events being reported to userspace (and causing trouble there).
Add a quirk setting the report_key_events mask to REPORT_BRIGHTNESS_KEY_EVENTS so that the ACPI_VIDEO_NOTIFY_CYCLE events will be ignored, while still reporting brightness up/down hotkey-presses to userspace normally.
--- drivers/acpi/acpi_video.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/acpi/acpi_video.c +9 -0
@@ -556,6 +556,15 @@ static const struct dmi_system_id video_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V131"), }, }, + { + .callback = video_set_report_key_events, + .driver_data = (void *)((uintptr_t)REPORT_BRIGHTNESS_KEY_EVENTS), + .ident = "Dell Vostro 3350", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3350"), + }, + },/* * Some machines change the brightness themselves when a brightness * hotkey gets pressed, despite us telling them not to. In this case
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 378/421 virtio-blk: Fix memory leak among suspend/resume procedure
In reply to Greg Kroah-HartmanFrom: Xie Yongji <[email protected]>
[ Upstream commit b71ba22e7c6c6b279c66f53ee7818709774efa1f ]
The vblk->vqs should be freed before we call init_vqs() in virtblk_restore().
--- drivers/block/virtio_blk.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/block/virtio_blk.c +2 -0
@@ -944,6 +944,8 @@ static int virtblk_freeze(struct virtio_device *vdev)blk_mq_quiesce_queue (vblk->disk->queue); vdev->config->del_vqs (vdev); +kfree (vblk->vqs); +return 0 ; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 379/421 virtio_net: Fix error handling in virtnet_restore()
In reply to Greg Kroah-HartmanFrom: Xie Yongji <[email protected]>
[ Upstream commit 3f2869cace829fb4b80fc53b3ddaa7f4ba9acbf1 ]
Do some cleanups in virtnet_restore() when virtnet_cpu_notif_add() failed.
--- drivers/net/virtio_net.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/virtio_net.c +4 -1
@@ -3199,8 +3199,11 @@ static __maybe_unused int virtnet_restore(struct virtio_device *vdev)virtnet_set_queues (vi, vi->curr_queue_pairs); err =virtnet_cpu_notif_add (vi); -if (err) +if (err) { +virtnet_freeze_down (vdev); +remove_vq_common (vi);return err; + }return 0 ; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 380/421 virtio_console: Assure used length from device is limited
In reply to Greg Kroah-HartmanFrom: Xie Yongji <[email protected]>
[ Upstream commit d00d8da5869a2608e97cfede094dfc5e11462a46 ]
The buf->len might come from an untrusted device. This ensures the value would not exceed the size of the buffer to avoid data corruption or loss.
--- drivers/char/virtio_console.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/char/virtio_console.c +2 -2
@@ -488,7 +488,7 @@ static struct port_buffer *get_inbuf(struct port *port) buf =virtqueue_get_buf (port->in_vq, &len);if (buf) { - buf->len = len; + buf->len =min_t (size_t, len, buf->size); buf->offset =0 ; port->stats.bytes_received += len; }
@@ -1738,7 +1738,7 @@ static void control_work_handler(struct work_struct *work)while ((buf =virtqueue_get_buf (vq, &len))) {spin_unlock (&portdev->c_ivq_lock); - buf->len = len; + buf->len =min_t (size_t, len, buf->size); buf->offset =0 ;handle_control_message (vq->vdev, portdev, buf);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 381/421 f2fs: add MODULE_SOFTDEP to ensure crc32 is included in the initramfs
In reply to Greg Kroah-HartmanFrom: Chao Yu <[email protected]>
[ Upstream commit 0dd571785d61528d62cdd8aa49d76bc6085152fe ]
As marcosfrm reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=213089
Initramfs generators rely on "pre" softdeps (and "depends") to include additional required modules.
F2FS does not declare "pre: crc32" softdep. Then every generator (dracut, mkinitcpio...) has to maintain a hardcoded list for this purpose.
Hence let's use MODULE_SOFTDEP("pre: crc32") in f2fs code.
--- fs/f2fs/super.c | 1 + 1 file changed, 1 insertion(+)
fs/f2fs/super.c +1 -0
@@ -3373,4 +3373,5 @@ module_exit(exit_f2fs_fs)MODULE_AUTHOR ("Samsung Electronics's Praesto Team" );MODULE_DESCRIPTION ("Flash Friendly File System" );MODULE_LICENSE ("GPL" ); +MODULE_SOFTDEP ("pre: crc32" );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 382/421 PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun
In reply to Greg Kroah-HartmanFrom: Krzysztof Wilczyński <[email protected]>
[ Upstream commit bdcdaa13ad96f1a530711c29e6d4b8311eff767c ]
"utf16s_to_utf8s(..., buf, PAGE_SIZE)" puts up to PAGE_SIZE bytes into "buf" and returns the number of bytes it actually put there. If it wrote PAGE_SIZE bytes, the newline added by dsm_label_utf16s_to_utf8s() would overrun "buf".
Reduce the size available for utf16s_to_utf8s() to use so there is always space for the newline.
--- drivers/pci/pci-label.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/pci-label.c +1 -1
@@ -162,7 +162,7 @@ static void dsm_label_utf16s_to_utf8s(union acpi_object *obj, char *buf) len =utf16s_to_utf8s ((const wchar_t *)obj->buffer.pointer, obj->buffer.length,UTF16_LITTLE_ENDIAN , - buf,PAGE_SIZE ); + buf,PAGE_SIZE -1 ); buf[len] ='\n' ; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 383/421 power: supply: rt5033_battery: Fix device tree enumeration
In reply to Greg Kroah-HartmanFrom: Stephan Gerhold <[email protected]>
[ Upstream commit f3076cd8d1d5fa64b5e1fa5affc045c2fc123baa ]
The fuel gauge in the RT5033 PMIC has its own I2C bus and interrupt line. Therefore, it is not actually part of the RT5033 MFD and needs its own of_match_table to probe properly.
Also, given that it's independent of the MFD, there is actually no need to make the Kconfig depend on MFD_RT5033. Although the driver uses the shared <linux/mfd/rt5033.h> header, there is no compile or runtime dependency on the RT5033 MFD driver.
--- drivers/power/supply/Kconfig | 3 ++- drivers/power/supply/rt5033_battery.c | 7 +++++++ 2 files changed, 9 insertions(+), 1 deletion(-)
drivers/power/supply/Kconfig +2 -1
@@ -621,7 +621,8 @@ config BATTERY_GOLDFISH config BATTERY_RT5033 tristate "RT5033 fuel gauge support" - depends on MFD_RT5033 + depends on I2C + select REGMAP_I2C help This adds support for battery fuel gauge in Richtek RT5033 PMIC. The fuelgauge calculates and determines the battery state of charge
drivers/power/supply/rt5033_battery.c +7 -0
@@ -167,9 +167,16 @@ static const struct i2c_device_id rt5033_battery_id[] = { };MODULE_DEVICE_TABLE (i2c, rt5033_battery_id); +static const struct of_device_id rt5033_battery_of_match[] = { + { .compatible ="richtek,rt5033-battery" , }, + { } +}; +MODULE_DEVICE_TABLE (of, rt5033_battery_of_match); +static struct i2c_driver rt5033_battery_driver = { .driver = { .name ="rt5033-battery" , + .of_match_table = rt5033_battery_of_match, }, .probe = rt5033_battery_probe, .remove = rt5033_battery_remove,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 384/421 NFSv4: Initialise connection to the server in nfs4_alloc_client()
In reply to Greg Kroah-HartmanFrom: Trond Myklebust <[email protected]>
[ Upstream commit dd99e9f98fbf423ff6d365b37a98e8879170f17c ]
Set up the connection to the NFSv4 server in nfs4_alloc_client(), before we've added the struct nfs_client to the net-namespace's nfs_client_list so that a downed server won't cause other mounts to hang in the trunking detection code.
--- fs/nfs/nfs4client.c | 82 +++++++++++++++++++++++---------------------- 1 file changed, 42 insertions(+), 40 deletions(-)
fs/nfs/nfs4client.c +42 -40
@@ -191,8 +191,11 @@ void nfs40_shutdown_client(struct nfs_client *clp)struct nfs_client *nfs4_alloc_client (const struct nfs_client_initdata *cl_init) { -int err; +char buf[INET6_ADDRSTRLEN +1 ]; +const char *ip_addr = cl_init->ip_addr;struct nfs_client *clp =nfs_alloc_client (cl_init); +int err; +if (IS_ERR (clp))return clp;
@@ -216,6 +219,44 @@ struct nfs_client *nfs4_alloc_client(const struct nfs_client_initdata *cl_init)init_waitqueue_head (&clp->cl_lock_waitq);#endif INIT_LIST_HEAD (&clp->pending_cb_stateids); + +if (cl_init->minorversion !=0 ) +__set_bit (NFS_CS_INFINITE_SLOTS , &clp->cl_flags); +__set_bit (NFS_CS_DISCRTRY , &clp->cl_flags); +__set_bit (NFS_CS_NO_RETRANS_TIMEOUT , &clp->cl_flags); + +/* +* Set up the connection to the server before we add add to the +* global list. +*/ + err =nfs_create_rpc_client (clp, cl_init,RPC_AUTH_GSS_KRB5I ); +if (err == -EINVAL ) + err =nfs_create_rpc_client (clp, cl_init,RPC_AUTH_UNIX ); +if (err <0 ) + goto error; + +/* If no clientaddr= option was specified, find a usable cb address */ +if (ip_addr ==NULL ) { +struct sockaddr_storage cb_addr; +struct sockaddr *sap = (struct sockaddr *)&cb_addr; + + err =rpc_localaddr (clp->cl_rpcclient, sap,sizeof (cb_addr)); +if (err <0 ) + goto error; + err =rpc_ntop (sap, buf,sizeof (buf)); +if (err <0 ) + goto error; + ip_addr = (const char *)buf; + } +strlcpy (clp->cl_ipaddr, ip_addr,sizeof (clp->cl_ipaddr)); + + err =nfs_idmap_new (clp); +if (err <0 ) { +dprintk ("%s: failed to create idmapper. Error = %d\n" , + __func__, err); + goto error; + } +__set_bit (NFS_CS_IDMAP , &clp->cl_res_state);return clp; error:
@@ -368,8 +409,6 @@ static int nfs4_init_client_minor_version(struct nfs_client *clp)struct nfs_client *nfs4_init_client (struct nfs_client *clp,const struct nfs_client_initdata *cl_init) { -char buf[INET6_ADDRSTRLEN +1 ]; -const char *ip_addr = cl_init->ip_addr;struct nfs_client *old;int error;
@@ -377,43 +416,6 @@ struct nfs_client *nfs4_init_client(struct nfs_client *clp,/* the client is initialised already */ return clp; -/* Check NFS protocol revision and initialize RPC op vector */ - clp->rpc_ops = &nfs_v4_clientops; - -if (clp->cl_minorversion !=0 ) -__set_bit (NFS_CS_INFINITE_SLOTS , &clp->cl_flags); -__set_bit (NFS_CS_DISCRTRY , &clp->cl_flags); -__set_bit (NFS_CS_NO_RETRANS_TIMEOUT , &clp->cl_flags); - - error =nfs_create_rpc_client (clp, cl_init,RPC_AUTH_GSS_KRB5I ); -if (error == -EINVAL ) - error =nfs_create_rpc_client (clp, cl_init,RPC_AUTH_UNIX ); -if (error <0 ) - goto error; - -/* If no clientaddr= option was specified, find a usable cb address */ -if (ip_addr ==NULL ) { -struct sockaddr_storage cb_addr; -struct sockaddr *sap = (struct sockaddr *)&cb_addr; - - error =rpc_localaddr (clp->cl_rpcclient, sap,sizeof (cb_addr)); -if (error <0 ) - goto error; - error =rpc_ntop (sap, buf,sizeof (buf)); -if (error <0 ) - goto error; - ip_addr = (const char *)buf; - } -strlcpy (clp->cl_ipaddr, ip_addr,sizeof (clp->cl_ipaddr)); - - error =nfs_idmap_new (clp); -if (error <0 ) { -dprintk ("%s: failed to create idmapper. Error = %d\n" , - __func__, error); - goto error; - } -__set_bit (NFS_CS_IDMAP , &clp->cl_res_state); - error =nfs4_init_client_minor_version (clp);if (error <0 ) goto error;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 385/421 um: fix error return code in slip_open()
In reply to Greg Kroah-HartmanFrom: Zhen Lei <[email protected]>
[ Upstream commit b77e81fbe5f5fb4ad9a61ec80f6d1e30b6da093a ]
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function.
--- arch/um/drivers/slip_user.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/um/drivers/slip_user.c +2 -1
@@ -145,7 +145,8 @@ static int slip_open(void *data) } sfd = err; -if (set_up_tty (sfd)) + err =set_up_tty (sfd); +if (err) goto out_close2; pri->slave = sfd;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 386/421 um: fix error return code in winch_tramp()
In reply to Greg Kroah-HartmanFrom: Zhen Lei <[email protected]>
[ Upstream commit ccf1236ecac476d9d2704866d9a476c86e387971 ]
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function.
--- arch/um/drivers/chan_user.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/um/drivers/chan_user.c +2 -1
@@ -256,7 +256,8 @@ static int winch_tramp(int fd, struct tty_port *port, int *fd_out, goto out_close; } -if (os_set_fd_block (*fd_out,0 )) { + err =os_set_fd_block (*fd_out,0 ); +if (err) {printk (UM_KERN_ERR "winch_tramp: failed to set thread_fd " "non-blocking.\n" ); goto out_close;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 387/421 watchdog: aspeed: fix hardware timeout calculation
In reply to Greg Kroah-HartmanFrom: Tao Ren <[email protected]>
[ Upstream commit e7dc481c92060f9ce872878b0b7a08c24713a7e5 ]
Fix hardware timeout calculation in aspeed_wdt_set_timeout function to ensure the reload value does not exceed the hardware limit.
--- drivers/watchdog/aspeed_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/watchdog/aspeed_wdt.c +1 -1
@@ -149,7 +149,7 @@ static int aspeed_wdt_set_timeout(struct watchdog_device *wdd, wdd->timeout = timeout; - actual =min (timeout, wdd->max_hw_heartbeat_ms *1000 ); + actual =min (timeout, wdd->max_hw_heartbeat_ms /1000 );writel (actual *WDT_RATE_1MHZ , wdt->base +WDT_RELOAD_VALUE );writel (WDT_RESTART_MAGIC , wdt->base +WDT_RESTART );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 388/421 nfs: fix acl memory leak of posix_acl_create()
In reply to Greg Kroah-HartmanFrom: Gao Xiang <[email protected]>
[ Upstream commit 1fcb6fcd74a222d9ead54d405842fc763bb86262 ]
When looking into another nfs xfstests report, I found acl and default_acl in nfs3_proc_create() and nfs3_proc_mknod() error paths are possibly leaked. Fix them in advance.
--- fs/nfs/nfs3proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
fs/nfs/nfs3proc.c +2 -2
@@ -346,7 +346,7 @@ nfs3_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,break ;case NFS3_CREATE_UNCHECKED : - goto out; + goto out_release_acls; }nfs_fattr_init (data->res.dir_attr);nfs_fattr_init (data->res.fattr);
@@ -695,7 +695,7 @@ nfs3_proc_mknod(struct inode *dir, struct dentry *dentry, struct iattr *sattr,break ;default : status = -EINVAL ; - goto out; + goto out_release_acls; } status =nfs3_do_create (dir, dentry, data);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 389/421 ubifs: Set/Clear I_LINKABLE under i_lock for whiteout inode
In reply to Greg Kroah-HartmanFrom: Zhihao Cheng <[email protected]>
[ Upstream commit a801fcfeef96702fa3f9b22ad56c5eb1989d9221 ]
xfstests-generic/476 reports a warning message as below:
WARNING: CPU: 2 PID: 30347 at fs/inode.c:361 inc_nlink+0x52/0x70 Call Trace: do_rename+0x502/0xd40 [ubifs] ubifs_rename+0x8b/0x180 [ubifs] vfs_rename+0x476/0x1080 do_renameat2+0x67c/0x7b0 __x64_sys_renameat2+0x6e/0x90 do_syscall_64+0x66/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xae
Following race case can cause this:
rename_whiteout(Thread 1) wb_workfn(Thread 2)ubifs_rename
do_rename
__writeback_single_inode
spin_lock(&inode->i_lock)
whiteout->i_state |= I_LINKABLE
inode->i_state &= ~dirty;
---- How race happens on i_state:
(tmp = whiteout->i_state | I_LINKABLE)
(tmp = inode->i_state & ~dirty)
(whiteout->i_state = tmp)
(inode->i_state = tmp)
----
spin_unlock(&inode->i_lock)
inc_nlink(whiteout)
WARN_ON(!(inode->i_state & I_LINKABLE)) !!!Fix to add i_lock to avoid i_state update race condition.
--- fs/ubifs/dir.c | 7 +++++++ 1 file changed, 7 insertions(+)
fs/ubifs/dir.c +7 -0
@@ -1354,7 +1354,10 @@ static int do_rename(struct inode *old_dir, struct dentry *old_dentry, goto out_release; } +spin_lock (&whiteout->i_lock); whiteout->i_state |=I_LINKABLE ; +spin_unlock (&whiteout->i_lock); + whiteout_ui =ubifs_inode (whiteout); whiteout_ui->data = dev; whiteout_ui->data_len =ubifs_encode_dev (dev,MKDEV (0 ,0 ));
@@ -1447,7 +1450,11 @@ static int do_rename(struct inode *old_dir, struct dentry *old_dentry,inc_nlink (whiteout);mark_inode_dirty (whiteout); + +spin_lock (&whiteout->i_lock); whiteout->i_state &= ~I_LINKABLE ; +spin_unlock (&whiteout->i_lock); +iput (whiteout); }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 390/421 PCI: iproc: Fix multi-MSI base vector number allocation
In reply to Greg Kroah-HartmanFrom: Sandor Bodo-Merle <[email protected]>
[ Upstream commit e673d697b9a234fc3544ac240e173cef8c82b349 ]
Commit fc54bae28818 ("PCI: iproc: Allow allocation of multiple MSIs") introduced multi-MSI support with a broken allocation mechanism (it failed to reserve the proper number of bits from the inner domain). Natural alignment of the base vector number was also not guaranteed.
--- drivers/pci/controller/pcie-iproc-msi.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)
drivers/pci/controller/pcie-iproc-msi.c +11 -10
@@ -252,18 +252,18 @@ static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,mutex_lock (&msi->bitmap_lock); -/* Allocate 'nr_cpus' number of MSI vectors each time */ - hwirq =bitmap_find_next_zero_area (msi->bitmap, msi->nr_msi_vecs,0 , - msi->nr_cpus,0 ); -if (hwirq < msi->nr_msi_vecs) { -bitmap_set (msi->bitmap, hwirq, msi->nr_cpus); - }else { -mutex_unlock (&msi->bitmap_lock); -return -ENOSPC ; - } +/* +* Allocate 'nr_irqs' multiplied by 'nr_cpus' number of MSI vectors +* each time +*/ + hwirq =bitmap_find_free_region (msi->bitmap, msi->nr_msi_vecs, +order_base_2 (msi->nr_cpus * nr_irqs));mutex_unlock (&msi->bitmap_lock); +if (hwirq <0 ) +return -ENOSPC ; +for (i =0 ; i < nr_irqs; i++) { irq_domain_set_info(domain, virq + i, hwirq + i, &iproc_msi_bottom_irq_chip,
@@ -284,7 +284,8 @@ static void iproc_msi_irq_domain_free(struct irq_domain *domain,mutex_lock (&msi->bitmap_lock); hwirq =hwirq_to_canonical_hwirq (msi, data->hwirq); -bitmap_clear (msi->bitmap, hwirq, msi->nr_cpus); +bitmap_release_region (msi->bitmap, hwirq, +order_base_2 (msi->nr_cpus * nr_irqs));mutex_unlock (&msi->bitmap_lock);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 391/421 PCI: iproc: Support multi-MSI only on uniprocessor kernel
In reply to Greg Kroah-HartmanFrom: Sandor Bodo-Merle <[email protected]>
[ Upstream commit 2dc0a201d0f59e6818ef443609f0850a32910844 ]
The interrupt affinity scheme used by this driver is incompatible with multi-MSI as it implies moving the doorbell address to that of another MSI group. This isn't possible for multi-MSI, as all the MSIs must have the same doorbell address. As such it is restricted to systems with a single CPU.
--- drivers/pci/controller/pcie-iproc-msi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/pci/controller/pcie-iproc-msi.c +7 -1
@@ -171,7 +171,7 @@ static struct irq_chip iproc_msi_irq_chip = {static struct msi_domain_info iproc_msi_domain_info = { .flags =MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS | -MSI_FLAG_MULTI_PCI_MSI |MSI_FLAG_PCI_MSIX , +MSI_FLAG_PCI_MSIX , .chip = &iproc_msi_irq_chip, };
@@ -250,6 +250,9 @@ static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,struct iproc_msi *msi = domain->host_data;int hwirq, i; +if (msi->nr_cpus >1 && nr_irqs >1 ) +return -EINVAL ; +mutex_lock (&msi->bitmap_lock);/*
@@ -539,6 +542,9 @@ int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node)mutex_init (&msi->bitmap_lock); msi->nr_cpus =num_possible_cpus (); +if (msi->nr_cpus ==1 ) + iproc_msi_domain_info.flags |=MSI_FLAG_MULTI_PCI_MSI ; + msi->nr_irqs =of_irq_count (node);if (!msi->nr_irqs) {dev_err (pcie->dev,"found no MSI GIC interrupt\n" );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 392/421 x86/fpu: Limit xstate copy size in xstateregs_set()
In reply to Greg Kroah-HartmanFrom: Thomas Gleixner <[email protected]>
[ Upstream commit 07d6688b22e09be465652cf2da0da6bf86154df6 ]
If the count argument is larger than the xstate size, this will happily copy beyond the end of xstate.
--- arch/x86/kernel/fpu/regset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/fpu/regset.c +1 -1
@@ -128,7 +128,7 @@ int xstateregs_set(struct task_struct *target, const struct user_regset *regset,/* * A whole standard-format XSAVE buffer is needed: */ -if ((pos !=0 ) || (count < fpu_user_xstate_size)) +if (pos !=0 || count != fpu_user_xstate_size)return -EFAULT ; xsave = &fpu->state.xsave;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 393/421 virtio_net: move tx vq operation under tx queue lock
In reply to Greg Kroah-HartmanFrom: Michael S. Tsirkin <[email protected]>
[ Upstream commit 5a2f966d0f3fa0ef6dada7ab9eda74cacee96b8a ]
It's unsafe to operate a vq from multiple threads. Unfortunately this is exactly what we do when invoking clean tx poll from rx napi.
Same happens with napi-tx even without the opportunistic cleaning from the receive interrupt: that races with processing the vq in start_xmit.
As a fix move everything that deals with the vq to under tx lock.
--- drivers/net/virtio_net.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
drivers/net/virtio_net.c +21 -1
@@ -1506,6 +1506,8 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget)struct virtnet_info *vi = sq->vq->vdev->priv;unsigned int index =vq2txq (sq->vq);struct netdev_queue *txq; +int opaque; +bool done;if (unlikely (is_xdp_raw_buffer_queue (vi, index))) {/* We don't need to enable cb for XDP */
@@ -1515,10 +1517,28 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget) txq =netdev_get_tx_queue (vi->dev, index);__netif_tx_lock (txq,raw_smp_processor_id ()); +virtqueue_disable_cb (sq->vq);free_old_xmit_skbs (sq, true); + + opaque =virtqueue_enable_cb_prepare (sq->vq); + + done =napi_complete_done (napi,0 ); + +if (!done) +virtqueue_disable_cb (sq->vq); +__netif_tx_unlock (txq); -virtqueue_napi_complete (napi, sq->vq,0 ); +if (done) { +if (unlikely (virtqueue_poll (sq->vq, opaque))) { +if (napi_schedule_prep (napi)) { +__netif_tx_lock (txq,raw_smp_processor_id ()); +virtqueue_disable_cb (sq->vq); +__netif_tx_unlock (txq); +__napi_schedule (napi); + } + } + }if (sq->vq->num_free >=2 +MAX_SKB_FRAGS )netif_tx_wake_queue (txq);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 394/421 ALSA: isa: Fix error return code in snd_cmi8330_probe()
In reply to Greg Kroah-HartmanFrom: Zhen Lei <[email protected]>
[ Upstream commit 31028cbed26a8afa25533a10425ffa2ab794c76c ]
When 'SB_HW_16' check fails, the error code -ENODEV instead of 0 should be returned, which is the same as that returned when 'WSS_HW_CMI8330' check fails.
--- sound/isa/cmi8330.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/isa/cmi8330.c +1 -1
@@ -564,7 +564,7 @@ static int snd_cmi8330_probe(struct snd_card *card, int dev) }if (acard->sb->hardware !=SB_HW_16 ) { snd_printk(KERN_ERR PFX "SB16 not found during probe\n"); -return err; +return -ENODEV ; }snd_wss_out (acard->wss,CS4231_MISC_INFO ,0x40 );/* switch on MODE2 */
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 395/421 NFSv4/pNFS: Dont call _nfs4_pnfs_v3_ds_connect multiple times
In reply to Greg Kroah-HartmanFrom: Trond Myklebust <[email protected]>
[ Upstream commit f46f84931a0aa344678efe412d4b071d84d8a805 ]
After we grab the lock in nfs4_pnfs_ds_connect(), there is no check for whether or not ds->ds_clp has already been initialised, so we can end up adding the same transports multiple times.
--- fs/nfs/pnfs_nfs.c | 52 +++++++++++++++++++++++------------------------ 1 file changed, 26 insertions(+), 26 deletions(-)
fs/nfs/pnfs_nfs.c +26 -26
@@ -555,19 +555,16 @@ out: }EXPORT_SYMBOL_GPL (nfs4_pnfs_ds_add); -static void nfs4_wait_ds_connect (struct nfs4_pnfs_ds *ds) +static int nfs4_wait_ds_connect (struct nfs4_pnfs_ds *ds) {might_sleep (); -wait_on_bit (&ds->ds_state,NFS4DS_CONNECTING , -TASK_KILLABLE ); +return wait_on_bit (&ds->ds_state,NFS4DS_CONNECTING ,TASK_KILLABLE ); }static void nfs4_clear_ds_conn_bit (struct nfs4_pnfs_ds *ds) {smp_mb__before_atomic (); -clear_bit (NFS4DS_CONNECTING , &ds->ds_state); -smp_mb__after_atomic (); -wake_up_bit (&ds->ds_state,NFS4DS_CONNECTING ); +clear_and_wake_up_bit (NFS4DS_CONNECTING , &ds->ds_state); } static struct nfs_client *(*get_v3_ds_connect)(
@@ -728,30 +725,33 @@ int nfs4_pnfs_ds_connect(struct nfs_server *mds_srv, struct nfs4_pnfs_ds *ds, {int err; -again: - err =0 ; -if (test_and_set_bit (NFS4DS_CONNECTING , &ds->ds_state) ==0 ) { -if (version ==3 ) { - err =_nfs4_pnfs_v3_ds_connect (mds_srv, ds, timeo, - retrans); - }else if (version ==4 ) { - err =_nfs4_pnfs_v4_ds_connect (mds_srv, ds, timeo, - retrans, minor_version); - }else { -dprintk ("%s: unsupported DS version %d\n" , __func__, - version); - err = -EPROTONOSUPPORT ; - } +do { + err =nfs4_wait_ds_connect (ds); +if (err || ds->ds_clp) + goto out; +if (nfs4_test_deviceid_unavailable (devid)) +return -ENODEV ; + }while (test_and_set_bit (NFS4DS_CONNECTING , &ds->ds_state) !=0 ); -nfs4_clear_ds_conn_bit (ds); - }else { -nfs4_wait_ds_connect (ds); +if (ds->ds_clp) + goto connect_done; -/* what was waited on didn't connect AND didn't mark unavail */ -if (!ds->ds_clp && !nfs4_test_deviceid_unavailable (devid)) - goto again; +switch (version) { +case 3 : + err =_nfs4_pnfs_v3_ds_connect (mds_srv, ds, timeo, retrans); +break ; +case 4 : + err =_nfs4_pnfs_v4_ds_connect (mds_srv, ds, timeo, retrans, + minor_version); +break ; +default : +dprintk ("%s: unsupported DS version %d\n" , __func__, version); + err = -EPROTONOSUPPORT ; } +connect_done: +nfs4_clear_ds_conn_bit (ds); +out:/* * At this point the ds->ds_clp should be ready, but it might have * hit an error.
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 396/421 hexagon: use common DISCARDS macro
In reply to Greg Kroah-HartmanFrom: Nathan Chancellor <[email protected]>
[ Upstream commit 681ba73c72302214686401e707e2087ed11a6556 ]
ld.lld warns that the '.modinfo' section is not currently handled:
ld.lld: warning: kernel/built-in.a(workqueue.o):(.modinfo) is being placed in '.modinfo' ld.lld: warning: kernel/built-in.a(printk/printk.o):(.modinfo) is being placed in '.modinfo' ld.lld: warning: kernel/built-in.a(irq/spurious.o):(.modinfo) is being placed in '.modinfo' ld.lld: warning: kernel/built-in.a(rcu/update.o):(.modinfo) is being placed in '.modinfo'
The '.modinfo' section was added in commit 898490c010b5 ("moduleparam:
Save information about built-in modules in separate file") to the DISCARDS macro but Hexagon has never used that macro. The unification of DISCARDS happened in commit 023bf6f1b8bf ("linker script: unify usage of discard definition") in 2009, prior to Hexagon being added in 2011.
Switch Hexagon over to the DISCARDS macro so that anything that is expected to be discarded gets discarded.
--- arch/hexagon/kernel/vmlinux.lds.S | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
arch/hexagon/kernel/vmlinux.lds.S +1 -6
@@ -73,13 +73,8 @@ SECTIONS _end = .; - /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - EXIT_CALL - } - STABS_DEBUG DWARF_DEBUG + DISCARDS }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 397/421 reset: a10sr: add missing of_match_table reference
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 466ba3c8ff4fae39e455ff8d080b3d5503302765 ]
The driver defined of_device_id table but did not use it with of_match_table. This prevents usual matching via devicetree and causes a W=1 warning:
drivers/reset/reset-a10sr.c:111:34: warning:
‘a10sr_reset_of_match’ defined but not used [-Wunused-const-variable=]
--- drivers/reset/reset-a10sr.c | 1 + 1 file changed, 1 insertion(+)
drivers/reset/reset-a10sr.c +1 -0
@@ -129,6 +129,7 @@ static struct platform_driver a10sr_reset_driver = { .probe = a10sr_reset_probe, .driver = { .name = "altr_a10sr_reset", + .of_match_table = a10sr_reset_of_match, }, };module_platform_driver (a10sr_reset_driver);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 398/421 ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 75121e1dc9fe4def41e63d57f6a53749b88006ed ]
There is no "max_brightness" property. This brings the intentional brightness reduce of green LED and dtschema checks as well:
arch/arm/boot/dts/exynos5410-odroidxu.dt.yaml: led-controller-1: led-1: 'max-brightness' is a required property
--- arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi +2 -2
@@ -22,7 +22,7 @@ * Green LED is much brighter than the others * so limit its max brightness */ - max_brightness = <127>; + max-brightness = <127>; linux,default-trigger = "mmc0"; };
@@ -30,7 +30,7 @@ label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; - max_brightness = <255>; + max-brightness = <255>; linux,default-trigger = "heartbeat"; }; };
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 399/421 ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit a7e59c84cf2055a1894f45855c8319191f2fa59e ]
There is no "max_brightness" property as pointed out by dtschema:
arch/arm/boot/dts/exynos5422-odroidhc1.dt.yaml: led-controller: led-1: 'max-brightness' is a required property
--- arch/arm/boot/dts/exynos5422-odroidhc1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/exynos5422-odroidhc1.dts +1 -1
@@ -22,7 +22,7 @@ label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; - max_brightness = <255>; + max-brightness = <255>; linux,default-trigger = "heartbeat"; }; };
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 400/421 ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit fd2f1717966535b7d0b6fe45cf0d79e94330da5f ]
There is no "max_brightness" property as pointed out by dtschema:
arch/arm/boot/dts/exynos5422-odroidxu4.dt.yaml: led-controller: led-1: 'max-brightness' is a required property
--- arch/arm/boot/dts/exynos5422-odroidxu4.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/exynos5422-odroidxu4.dts +1 -1
@@ -24,7 +24,7 @@ label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; - max_brightness = <255>; + max-brightness = <255>; linux,default-trigger = "heartbeat"; }; };
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 401/421 memory: atmel-ebi: add missing of_node_put for loop iteration
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 907c5bbb514a4676160e79764522fff56ce3448e ]
Early exits from for_each_available_child_of_node() should decrement the node reference counter. Reported by Coccinelle:
drivers/memory/atmel-ebi.c:593:1-33: WARNING:
Function "for_each_available_child_of_node" should have of_node_put() before return around line 604.
--- drivers/memory/atmel-ebi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/memory/atmel-ebi.c +3 -1
@@ -579,8 +579,10 @@ static int atmel_ebi_probe(struct platform_device *pdev) child); ret =atmel_ebi_dev_disable (ebi, child); -if (ret) +if (ret) { +of_node_put (child);return ret; + } } }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 402/421 rtc: fix snprintf() checking in is_rtc_hctosys()
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
[ Upstream commit 54b909436ede47e0ee07f1765da27ec2efa41e84 ]
The scnprintf() function silently truncates the printf() and returns the number bytes that it was able to copy (not counting the NUL terminator). Thus, the highest value it can return here is "NAME_SIZE - 1" and the overflow check is dead code. Fix this by using the snprintf() function which returns the number of bytes that would have been copied if there was enough space and changing the condition from "> NAME_SIZE" to ">= NAME_SIZE".
--- drivers/rtc/rtc-proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/rtc/rtc-proc.c +2 -2
@@ -26,8 +26,8 @@ static bool is_rtc_hctosys(struct rtc_device *rtc)int size;char name[NAME_SIZE ]; - size =scnprintf (name,NAME_SIZE ,"rtc%d" , rtc->id); -if (size >NAME_SIZE ) + size =snprintf (name,NAME_SIZE ,"rtc%d" , rtc->id); +if (size >=NAME_SIZE )return false;return !strncmp (name,CONFIG_RTC_HCTOSYS_DEVICE ,NAME_SIZE );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 403/421 arm64: dts: renesas: v3msk: Fix memory size
In reply to Greg Kroah-HartmanFrom: Valentine Barshak <[email protected]>
[ Upstream commit a422ec20caef6a50cf3c1efa93538888ebd576a6 ]
The V3MSK board has 2 GiB RAM according to the datasheet and schematics.
--- arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +1 -1
@@ -24,7 +24,7 @@ memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; + reg = <0x0 0x48000000 0x0 0x78000000>; }; osc5_clk: osc5-clock {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 404/421 ARM: dts: r8a7779, marzen: Fix DU clock names
In reply to Greg Kroah-HartmanFrom: Geert Uytterhoeven <[email protected]>
[ Upstream commit 6ab8c23096a29b69044209a5925758a6f88bd450 ]
"make dtbs_check" complains:
arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected
Change the first clock name to match the DT bindings.
This has no effect on actual operation, as the Display Unit driver in Linux does not use the first clock name on R-Car H1, but just grabs the first clock.
--- arch/arm/boot/dts/r8a7779-marzen.dts | 2 +- arch/arm/boot/dts/r8a7779.dtsi | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r8a7779-marzen.dts +1 -1
@@ -146,7 +146,7 @@ status = "okay"; clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>; - clock-names = "du", "dclkin.0"; + clock-names = "du.0", "dclkin.0"; ports { port@0 {
arch/arm/boot/dts/r8a7779.dtsi +1 -0
@@ -437,6 +437,7 @@ reg = <0xfff80000 0x40000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_DU>; + clock-names = "du.0"; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled";
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 405/421 arm64: dts: qcom: msm8994-angler: Fix gpio-reserved-ranges 85-88
In reply to Greg Kroah-HartmanFrom: Petr Vorel <[email protected]>
[ Upstream commit f890f89d9a80fffbfa7ca791b78927e5b8aba869 ]
Reserve GPIO pins 85-88 as these aren't meant to be accessible from the application CPUs (causes reboot). Yet another fix similar to 9134586715e3, 5f8d3ab136d0, which is needed to allow angler to boot after 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning").
--- arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +4 -0
@@ -38,3 +38,7 @@ }; }; }; + +&tlmm { + gpio-reserved-ranges = <85 4>; +};
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 406/421 ARM: dts: BCM5301X: Fixup SPI binding
In reply to Greg Kroah-HartmanFrom: Rafał Miłecki <[email protected]>
[ Upstream commit d5aede3e6dd1b8ca574600a1ecafe1e580c53f2f ]
1. Reorder interrupts
2. Fix typo: s/spi_lr_overhead/spi_lr_overread/
3. Rename node: s/spi-nor@0/flash@0/
This fixes:arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi@18029200: interrupt-names: 'oneOf' conditional failed, one must be fixed:
['spi_lr_fullness_reached', 'spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted'] is too long Additional items are not allowed ('spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted' were unexpected) 'mspi_done' was expected
'spi_l1_intr' was expected
'mspi_halted' was expected
'spi_lr_fullness_reached' was expected
'spi_lr_session_aborted' was expected
'spi_lr_impatient' was expected
'spi_lr_session_done' was expected
'spi_lr_overread' was expected
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yamlarch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi-nor@0: $nodename:0: 'spi-nor@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
--- arch/arm/boot/dts/bcm5301x.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
arch/arm/boot/dts/bcm5301x.dtsi +9 -9
@@ -451,27 +451,27 @@ <0x1811b408 0x004>, <0x180293a0 0x01c>; reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "spi_lr_fullness_reached", + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mspi_done", + "mspi_halted", + "spi_lr_fullness_reached", "spi_lr_session_aborted", "spi_lr_impatient", "spi_lr_session_done", - "spi_lr_overhead", - "mspi_done", - "mspi_halted"; + "spi_lr_overread"; clocks = <&iprocmed>; clock-names = "iprocmed"; num-cs = <2>; #address-cells = <1>; #size-cells = <0>; - spi_nor: spi-nor@0 { + spi_nor: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 407/421 reset: bail if try_module_get() fails
In reply to Greg Kroah-HartmanFrom: Philipp Zabel <[email protected]>
[ Upstream commit 4fb26fb83f0def3d39c14e268bcd4003aae8fade ]
Abort instead of returning a new reset control for a reset controller device that is going to have its module unloaded.
--- drivers/reset/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/reset/core.c +4 -1
@@ -428,7 +428,10 @@ static struct reset_control *__reset_control_get_internal(if (!rstc)return ERR_PTR (-ENOMEM ); -try_module_get (rcdev->owner); +if (!try_module_get (rcdev->owner)) { +kfree (rstc); +return ERR_PTR (-ENODEV ); + } rstc->rcdev = rcdev;list_add (&rstc->list, &rcdev->reset_control_head);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 408/421 memory: fsl_ifc: fix leak of IO mapping on probe failure
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 3b132ab67fc7a358fff35e808fa65d4bea452521 ]
On probe error the driver should unmap the IO memory. Smatch reports:
drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298.
--- drivers/memory/fsl_ifc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/memory/fsl_ifc.c +2 -2
@@ -231,8 +231,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev) fsl_ifc_ctrl_dev->gregs =of_iomap (dev->dev.of_node,0 );if (!fsl_ifc_ctrl_dev->gregs) {dev_err (&dev->dev,"failed to get memory region\n" ); - ret = -ENODEV ; - goto err; +return -ENODEV ; }if (of_property_read_bool (dev->dev.of_node,"little-endian" )) {
@@ -308,6 +307,7 @@ err_irq:free_irq (fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev);irq_dispose_mapping (fsl_ifc_ctrl_dev->irq); err: +iounmap (fsl_ifc_ctrl_dev->gregs);return ret; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 409/421 memory: fsl_ifc: fix leak of private memory on probe failure
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 8e0d09b1232d0538066c40ed4c13086faccbdff6 ]
On probe error the driver should free the memory allocated for private structure. Fix this by using resource-managed allocation.
--- drivers/memory/fsl_ifc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/memory/fsl_ifc.c +2 -2
@@ -109,7 +109,6 @@ static int fsl_ifc_ctrl_remove(struct platform_device *dev)iounmap (ctrl->gregs);dev_set_drvdata (&dev->dev,NULL ); -kfree (ctrl);return 0 ; }
@@ -221,7 +220,8 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)dev_info (&dev->dev,"Freescale Integrated Flash Controller\n" ); - fsl_ifc_ctrl_dev =kzalloc (sizeof (*fsl_ifc_ctrl_dev),GFP_KERNEL ); + fsl_ifc_ctrl_dev =devm_kzalloc (&dev->dev,sizeof (*fsl_ifc_ctrl_dev), +GFP_KERNEL );if (!fsl_ifc_ctrl_dev)return -ENOMEM ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 410/421 ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
In reply to Greg Kroah-HartmanFrom: Aswath Govindraju <[email protected]>
[ Upstream commit 414bfe1d26b60ef20b58e36efd5363188a694bab ]
ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly.
--- arch/arm/boot/dts/am335x-cm-t335.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/am335x-cm-t335.dts +1 -1
@@ -552,7 +552,7 @@ status = "okay"; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; /* WLS1271 WiFi */ wlcore: wlcore@1 { compatible = "ti,wl1271";
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 411/421 ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
In reply to Greg Kroah-HartmanFrom: Aswath Govindraju <[email protected]>
[ Upstream commit 9b11fec7345f21995f4ea4bafb0e108b9a620238 ]
ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly.
--- arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/am43x-epos-evm.dts +2 -2
@@ -839,7 +839,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi0_pins_default>; pinctrl-1 = <&spi0_pins_sleep>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; }; &spi1 {
@@ -847,7 +847,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi1_pins_default>; pinctrl-1 = <&spi1_pins_sleep>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; }; &usb2_phy1 {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 412/421 ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
In reply to Greg Kroah-HartmanFrom: Christoph Niedermaier <[email protected]>
[ Upstream commit c016c26c1631f539c652b5d82242a3ca402545c1 ]
Fix ethernet reset time properties as described in Documentation/devicetree/bindings/net/ethernet-phy.yaml
--- arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx6q-dhcom-som.dtsi +2 -2
@@ -97,8 +97,8 @@ reg = <0>; max-speed = <100>; reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - reset-delay-us = <1000>; - reset-post-delay-us = <1000>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; }; }; };
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 413/421 ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
In reply to Greg Kroah-HartmanFrom: Christoph Niedermaier <[email protected]>
[ Upstream commit e2bdd3484890441b9cc2560413a86e8f2aa04157 ]
To make the ethernet cable plugin detection reliable the power detection of the smsc phy has been disabled.
--- arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/imx6q-dhcom-som.dtsi +1 -0
@@ -99,6 +99,7 @@ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; reset-assert-us = <1000>; reset-deassert-us = <1000>; + smsc,disable-energy-detect; /* Make plugin detection reliable */ }; }; };
Signature · 9 lines
2.30.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Greg Kroah-Hartman
maintainerPATCH 414/421 ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
In reply to Greg Kroah-HartmanFrom: Christoph Niedermaier <[email protected]>
[ Upstream commit ddc873cd3c0af4faad6a00bffda21c3f775126dd ]
The i2c bus can freeze at the end of transaction so the bus can no longer work. This scenario is improved by adding scl/sda gpios definitions to implement the i2c bus recovery mechanism.
--- arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 36 +++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-)
arch/arm/boot/dts/imx6q-dhcom-som.dtsi +33 -3
@@ -106,22 +106,31 @@ &i2c1 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; &i2c3 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; ltc3676: pmic@3c {
@@ -287,6 +296,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2-grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
@@ -294,6 +310,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3-grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
@@ -301,6 +324,13 @@ >; }; + pinctrl_i2c3_gpio: i2c3-gpio-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + >; + }; + pinctrl_pmic_hw300: pmic-hw300-grp { fsl,pins = < MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 415/421 scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
In reply to Greg Kroah-HartmanFrom: Christophe JAILLET <[email protected]>
[ Upstream commit 030e4138d11fced3b831c2761e4cecf347bae99c ]
If an error occurs after a pci_enable_pcie_error_reporting() call, it must be undone by a corresponding pci_disable_pcie_error_reporting() call, as already done in the remove function.
--- drivers/scsi/be2iscsi/be_main.c | 1 + 1 file changed, 1 insertion(+)
drivers/scsi/be2iscsi/be_main.c +1 -0
@@ -5764,6 +5764,7 @@ free_hba:pci_disable_msix (phba->pcidev);pci_dev_put (phba->pcidev);iscsi_host_free (phba->shost); +pci_disable_pcie_error_reporting (pcidev);pci_set_drvdata (pcidev,NULL ); disable_pci:pci_release_regions (pcidev);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 416/421 mips: always link byteswap helpers into decompressor
In reply to Greg Kroah-HartmanFrom: Arnd Bergmann <[email protected]>
[ Upstream commit cddc40f5617e53f97ef019d5b29c1bd6cbb031ec ]
My series to clean up the unaligned access implementation across architectures caused some mips randconfig builds to fail with:
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'
It turns out that this problem has already been fixed for the XZ decompressor but now it also shows up in (at least) LZO and LZ4. From my analysis I concluded that the compiler could always have emitted those calls, but the different implementation allowed it to make otherwise better decisions about not inlining the byteswap, which results in the link error when the out-of-line code is missing.
While it could be addressed by adding it to the two decompressor implementations that are known to be affected, but as this only adds 112 bytes to the kernel, the safer choice is to always add them.
--- arch/mips/boot/compressed/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/mips/boot/compressed/Makefile +2 -2
@@ -33,7 +33,7 @@ KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \ KCOV_INSTRUMENT := n # decompressor objects (linked with vmlinuz) -vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o +vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o $(obj)/bswapsi.o ifdef CONFIG_DEBUG_ZBOOT vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT) += $(obj)/dbg.o
@@ -47,7 +47,7 @@ extra-y += uart-ath79.c $(obj)/uart-ath79.c: $(srctree)/arch/mips/ath79/early_printk.c $(call cmd,shipped) -vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o $(obj)/bswapsi.o +vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o extra-y += ashldi3.c $(obj)/ashldi3.c: $(obj)/%.c: $(srctree)/lib/%.c FORCE
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 417/421 mips: disable branch profiling in boot/decompress.o
In reply to Greg Kroah-HartmanFrom: Randy Dunlap <[email protected]>
[ Upstream commit 97e488073cfca0eea84450169ca4cbfcc64e33e3 ]
Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o to prevent linkage errors.
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow
--- arch/mips/boot/compressed/decompress.c | 2 ++ 1 file changed, 2 insertions(+)
arch/mips/boot/compressed/decompress.c +2 -0
@@ -11,6 +11,8 @@* option) any later version. */ +#define DISABLE_BRANCH_PROFILING +#include <linux/types.h> #include <linux/kernel.h> #include <linux/string.h>
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 418/421 perf report: Fix --task and --stat with pipe input
In reply to Greg Kroah-HartmanFrom: Namhyung Kim <[email protected]>
[ Upstream commit 892ba7f18621a02af4428c58d97451f64685dba4 ]
Current 'perf report' fails to process a pipe input when --task or --stat options are used. This is because they reset all the tool callbacks and fails to find a matching event for a sample.
When pipe input is used, the event info is passed via ATTR records so it needs to handle that operation. Otherwise the following error occurs. Note, -14 (= -EFAULT) comes from evlist__parse_sample():
# perf record -a -o- sleep 1 | perf report -i- --stat Can't parse sample, err = -14 0x271044 [0x38]: failed to process type: 9 Error: failed to process sample #
Committer testing:
Before:
$ perf record -o- sleep 1 | perf report -i- --stat Can't parse sample, err = -14 [ perf record: Woken up 1 times to write data ] 0x1350 [0x30]: failed to process type: 9 Error: failed to process sample [ perf record: Captured and wrote 0.000 MB - ] $
After:
$ perf record -o- sleep 1 | perf report -i- --stat [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ]
Aggregated stats:
TOTAL events: 41
COMM events: 2 ( 4.9%)
EXIT events: 1 ( 2.4%)
SAMPLE events: 9 (22.0%)
MMAP2 events: 4 ( 9.8%)
ATTR events: 1 ( 2.4%)
FINISHED_ROUND events: 1 ( 2.4%)
THREAD_MAP events: 1 ( 2.4%)
CPU_MAP events: 1 ( 2.4%)
EVENT_UPDATE events: 1 ( 2.4%)
TIME_CONV events: 1 ( 2.4%)
FEATURE events: 19 (46.3%)
cycles:uhH stats:
SAMPLE events: 9
$
--- tools/perf/builtin-report.c | 6 ++++++ 1 file changed, 6 insertions(+)
tools/perf/builtin-report.c +6 -0
@@ -634,9 +634,14 @@ static void report__output_resort(struct report *rep)ui_progress__finish (); } +static int process_attr (struct perf_tool *tool__maybe_unused , +union perf_event *event, +struct evlist **pevlist); +static void stats_setup (struct report *rep) {memset (&rep->tool,0 ,sizeof (rep->tool)); + rep->tool.attr = process_attr; rep->tool.no_warn = true; }
@@ -656,6 +661,7 @@ static void tasks_setup(struct report *rep) rep->tool.mmap = perf_event__process_mmap; rep->tool.mmap2 = perf_event__process_mmap2; } + rep->tool.attr = process_attr; rep->tool.comm = perf_event__process_comm; rep->tool.exit = perf_event__process_exit; rep->tool.fork = perf_event__process_fork;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 419/421 MIPS: vdso: Invalid GIC access through VDSO
In reply to Greg Kroah-HartmanFrom: Martin Fäcknitz <[email protected]>
[ Upstream commit 47ce8527fbba145a7723685bc9a27d9855e06491 ]
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO doesn't return the correct time when using the GIC as clock source. The address of the GIC mapped page is in this case not calculated correctly. The GIC mapped page is calculated from the VDSO data by subtracting PAGE_SIZE:
void *get_gic(const struct vdso_data *data) {
return (void __iomem *)data - PAGE_SIZE;
}However, the data pointer is not page aligned for raw clock sources. This is because the VDSO data for raw clock sources (CS_RAW = 1) is stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0). Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:
+--------------------+ | | | vd[CS_RAW] | ---+ | vd[CS_HRES_COARSE] | | +--------------------+ | -PAGE_SIZE | | | | GIC mapped page | <--+ | | +--------------------+
When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns the wrong address (somewhere inside the GIC mapped page). The GIC counter values are not returned which results in an invalid time.
--- arch/mips/vdso/vdso.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/vdso/vdso.h +1 -1
@@ -81,7 +81,7 @@ static inline const union mips_vdso_data *get_vdso_data(void)static inline void __iomem *get_gic (const union mips_vdso_data *data) { -return (void __iomem *)data -PAGE_SIZE ; +return (void __iomem *)((unsigned long )data &PAGE_MASK ) -PAGE_SIZE ; }#endif /* CONFIG_CLKSRC_MIPS_GIC */
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 420/421 net: bridge: multicast: fix PIM hello router port marking race
In reply to Greg Kroah-HartmanFrom: Nikolay Aleksandrov <[email protected]>
commit 04bef83a3358946bfc98a5ecebd1b0003d83d882 upstream.
When a PIM hello packet is received on a bridge port with multicast snooping enabled, we mark it as a router port automatically, that includes adding that port the router port list. The multicast lock protects that list, but it is not acquired in the PIM message case leading to a race condition, we need to take it to fix the race.
--- net/bridge/br_multicast.c | 2 ++ 1 file changed, 2 insertions(+)
net/bridge/br_multicast.c +2 -0
@@ -1791,7 +1791,9 @@ static void br_multicast_pim(struct net_ pim_hdr_type(pimhdr) != PIM_TYPE_HELLO)return ; +spin_lock (&br->multicast_lock);br_multicast_mark_router (br, port); +spin_unlock (&br->multicast_lock); } static int br_multicast_ipv4_rcv(struct net_bridge *br,
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.19.198 release. There are 421 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 21 Jul 2021 14:47:42 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.198-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.19.y
and the diffstat can be found below.thanks,
greg k-h
Following patch caused arm64 build errors on 4.19 and 4.14.
Quoted 2 lines
Petr Vorel <[email protected]>
arm64: dts: qcom: msm8994-angler: Fix gpio-reserved-ranges 85-88
make --silent --keep-going --jobs=8 O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- 'CC=sccache aarch64-linux-gnu-gcc' 'HOSTCC=sccache gcc'
Error: /builds/linux/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts:42.1-6 Label or path tlmm not found
FATAL ERROR: Syntax error parsing input tree
make[3]: *** [scripts/Makefile.lib:294:arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dtb] Error 1 make[3]: Target '__build' not remade because of errors.
make[2]: *** [/builds/linux/scripts/Makefile.build:544:arch/arm64/boot/dts/qcom] Error 2
--
Linaro LKFT
https://lkft.linaro.org
Greg Kroah-Hartman
maintainerPATCH 421/421 scsi: scsi_dh_alua: Fix signedness bug in alua_rtpg()
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
commit 80927822e8b6be46f488524cd7d5fe683de97fc4 upstream.
The "retval" variable needs to be signed for the error handling to work.
--- drivers/scsi/device_handler/scsi_dh_alua.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/device_handler/scsi_dh_alua.c +2 -1
@@ -522,7 +522,8 @@ static int alua_rtpg(struct scsi_devicestruct alua_port_group *tmp_pg;int len, k, off, bufflen =ALUA_RTPG_SIZE ;unsigned char *desc, *buff; -unsigned err, retval; +unsigned err; +int retval;unsigned int tpg_desc_tbl_off;unsigned char orig_transition_tmo;unsigned long flags;