Skip to contentSkip to conversation

hwrng: Add Arm SMCCC TRNG based driver

PATCH Superseded Andre Przywara 4 participants 6 messages Jul 20, 2021 – Jul 21, 2021

Subsystems (2)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 hwrng: Add Arm SMCCC TRNG based driver

The "Arm True Random Number Generator Firmware Interface"[1] provides an SMCCC based interface to a true hardware random number generator. So far we are using that in arch_get_random_seed(), but it might be useful to expose the entropy through the /dev/hwrng device as well. This allows to assess the quality of the implementation, by using "rngtest" from the rng-tools package, for example.

Add a simple platform driver implementing the hw_random interface. We unconditionally instantiate the platform device in the driver file, then probe for the existence of the SMCCC TRNG implementation in the driver's probe routine.
Since the firmware takes care about serialisation, this can happily coexist with the arch_get_random_seed() bits.

[1] https://developer.arm.com/documentation/den0098/latest/
---
Changelog v1 ... v2:
- fix building as a module
- de-register device upon exit
- mention module name in Kconfig

 drivers/char/hw_random/Kconfig          |  14 ++
 drivers/char/hw_random/Makefile         |   1 +
 drivers/char/hw_random/arm_smccc_trng.c | 171 ++++++++++++++++++++++++
 3 files changed, 186 insertions(+)
 create mode 100644 drivers/char/hw_random/arm_smccc_trng.c
drivers/char/hw_random/Kconfig +14 -0
index 3f166c8a4099..239eca4d6805 100644
@@ -524,6 +524,20 @@ config HW_RANDOM_XIPHERA
 	  To compile this driver as a module, choose M here: the
 	  module will be called xiphera-trng.
 
+config HW_RANDOM_ARM_SMCCC_TRNG
+	tristate "Arm SMCCC TRNG firmware interface support"
+	depends on HAVE_ARM_SMCCC_DISCOVERY
+	default HW_RANDOM
+	help
+	  Say 'Y' to enable the True Random Number Generator driver using
+	  the Arm SMCCC TRNG firmware interface. This reads entropy from
+	  higher exception levels (firmware, hypervisor). Uses SMCCC for
+	  communicating with the firmware:
+	  https://developer.arm.com/documentation/den0098/latest/
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called arm_smccc_trng.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
drivers/char/hw_random/Makefile +1 -0
index 8933fada74f2..a5a1c765a394 100644
@@ -45,3 +45,4 @@ obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
 obj-$(CONFIG_HW_RANDOM_NPCM) += npcm-rng.o
 obj-$(CONFIG_HW_RANDOM_CCTRNG) += cctrng.o
 obj-$(CONFIG_HW_RANDOM_XIPHERA) += xiphera-trng.o
+obj-$(CONFIG_HW_RANDOM_ARM_SMCCC_TRNG) += arm_smccc_trng.o
drivers/char/hw_random/arm_smccc_trng.c new file +171 -0

171 lines not on this page · raw message

Signature · 7 lines
2.17.6


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#1 lore raw
Quoted 97 lines · Andre Przywara

The "Arm True Random Number Generator Firmware Interface"[1] provides an SMCCC based interface to a true hardware random number generator. So far we are using that in arch_get_random_seed(), but it might be useful to expose the entropy through the /dev/hwrng device as well. This allows to assess the quality of the implementation, by using "rngtest" from the rng-tools package, for example.

Add a simple platform driver implementing the hw_random interface. We unconditionally instantiate the platform device in the driver file, then probe for the existence of the SMCCC TRNG implementation in the driver's probe routine.
Since the firmware takes care about serialisation, this can happily coexist with the arch_get_random_seed() bits.

[1] https://developer.arm.com/documentation/den0098/latest/
---
Changelog v1 ... v2:
- fix building as a module
- de-register device upon exit
- mention module name in Kconfig

 drivers/char/hw_random/Kconfig          |  14 ++
 drivers/char/hw_random/Makefile         |   1 +
 drivers/char/hw_random/arm_smccc_trng.c | 171 ++++++++++++++++++++++++
 3 files changed, 186 insertions(+)
 create mode 100644 drivers/char/hw_random/arm_smccc_trng.c
drivers/char/hw_random/Kconfig +14 -0
index 3f166c8a4099..239eca4d6805 100644
@@ -524,6 +524,20 @@ config HW_RANDOM_XIPHERA
          To compile this driver as a module, choose M here: the
          module will be called xiphera-trng.
 
+config HW_RANDOM_ARM_SMCCC_TRNG
+       tristate "Arm SMCCC TRNG firmware interface support"
+       depends on HAVE_ARM_SMCCC_DISCOVERY
+       default HW_RANDOM
+       help
+         Say 'Y' to enable the True Random Number Generator driver using
+         the Arm SMCCC TRNG firmware interface. This reads entropy from
+         higher exception levels (firmware, hypervisor). Uses SMCCC for
+         communicating with the firmware:
+         https://developer.arm.com/documentation/den0098/latest/
+
+         To compile this driver as a module, choose M here: the
+         module will be called arm_smccc_trng.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
drivers/char/hw_random/Makefile +1 -0
index 8933fada74f2..a5a1c765a394 100644
@@ -45,3 +45,4 @@ obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
 obj-$(CONFIG_HW_RANDOM_NPCM) += npcm-rng.o
 obj-$(CONFIG_HW_RANDOM_CCTRNG) += cctrng.o
 obj-$(CONFIG_HW_RANDOM_XIPHERA) += xiphera-trng.o
+obj-$(CONFIG_HW_RANDOM_ARM_SMCCC_TRNG) += arm_smccc_trng.o
drivers/char/hw_random/arm_smccc_trng.c new file +27 -0
new file mode 100644
index 000000000000..3bd510a98882
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Randomness driver for the ARM SMCCC TRNG Firmware Interface
+ * https://developer.arm.com/documentation/den0098/latest/
+ *
+ *  Copyright (C) 2020 Arm Ltd.
+ *
+ * The ARM TRNG firmware interface specifies a protocol to read entropy
+ * from a higher exception level, to abstract from any machine specific
+ * implemenations and allow easier use in hypervisors.
+ *
+ * The firmware interface is realised using the SMCCC specification.
+ */
+
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/hw_random.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/arm-smccc.h>
+
+#ifdef CONFIG_ARM64
+#define ARM_SMCCC_TRNG_RND     ARM_SMCCC_TRNG_RND64
+#define MAX_BITS_PER_CALL      (3 * 64UL)
+#else
+#define ARM_SMCCC_TRNG_RND     ARM_SMCCC_TRNG_RND32
+#define MAX_BITS_PER_CALL      (3 * 32UL)

drivers/char/hw_random/arm_smccc_trng.c line 37

Quoted 10 lines
drivers/char/hw_random/arm_smccc_trng.c new file +10 -0
+#endif
+
+/* We don't want to allow the firmware to stall us forever. */
+#define SMCCC_TRNG_MAX_TRIES   20
+
+#define SMCCC_RET_TRNG_INVALID_PARAMETER       -2
+#define SMCCC_RET_TRNG_NO_ENTROPY              -3
+
+static struct platform_device *smccc_trng_pdev;
+

Can we split the platform device and the platform driver? The platform device should be registered by the core code once it discovers the SMCCC TRNG availabily. The platform driver can then use ordinary module alias autoloading etc based on the platform device availabilty.

This requires the following to be added though

MODULE_ALIAS("platform: smccc_trng")

but all the smccc calls could be dropped from the probe function in that case.

Quoted 135 lines
drivers/char/hw_random/arm_smccc_trng.c new file +134 -1
+static int smccc_trng_init(struct hwrng *rng)
+{
+       return 0;
+}
+
+static int copy_from_registers(char *buf, struct arm_smccc_res *res,
+                              size_t bytes)
+{
+       unsigned int chunk, copied;
+
+       if (bytes == 0)
+               return 0;
+
+       chunk = min(bytes, sizeof(long));
+       memcpy(buf, &res->a3, chunk);
+       copied = chunk;
+       if (copied >= bytes)
+               return copied;
+
+       chunk = min((bytes - copied), sizeof(long));
+       memcpy(&buf[copied], &res->a2, chunk);
+       copied += chunk;
+       if (copied >= bytes)
+               return copied;
+
+       chunk = min((bytes - copied), sizeof(long));
+       memcpy(&buf[copied], &res->a1, chunk);
+
+       return copied + chunk;
+}
+
+static int smccc_trng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+       struct arm_smccc_res res;
+       u8 *buf = data;
+       unsigned int copied = 0;
+       int tries = 0;
+
+       while (copied < max) {
+               size_t bits = min_t(size_t, (max - copied) * BITS_PER_BYTE,
+                                 MAX_BITS_PER_CALL);
+
+               arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_RND, bits, &res);
+               if ((int)res.a0 < 0)
+                       return (int)res.a0;
+
+               switch ((int)res.a0) {
+               case SMCCC_RET_SUCCESS:
+                       copied += copy_from_registers(buf + copied, &res,
+                                                     bits / BITS_PER_BYTE);
+                       tries = 0;
+                       break;
+               case SMCCC_RET_TRNG_NO_ENTROPY:
+                       if (!wait)
+                               return copied;
+                       tries++;
+                       if (tries >= SMCCC_TRNG_MAX_TRIES)
+                               return copied;
+                       cond_resched();
+                       break;
+               }
+       }
+
+       return copied;
+}
+
+static int smccc_trng_probe(struct platform_device *pdev)
+{
+       struct arm_smccc_res res;
+       struct hwrng *trng;
+       u32 version;
+       int ret;
+
+       /* We need ARM SMCCC v1.1, with its autodetection feature. */
+       if (arm_smccc_get_version() < ARM_SMCCC_VERSION_1_1)
+               return -ENODEV;
+
+       arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_VERSION, &res);
+       if ((int)res.a0 < 0)
+               return -ENODEV;
+       version = res.a0;
+
+       arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_FEATURES,
+                            ARM_SMCCC_TRNG_RND, &res);
+       if ((int)res.a0 < 0)
+               return -ENODEV;
+
+       trng = devm_kzalloc(&pdev->dev, sizeof(*trng), GFP_KERNEL);
+       if (!trng)
+               return -ENOMEM;
+
+       trng->name = "smccc_trng";
+       trng->init = smccc_trng_init;
+       trng->read = smccc_trng_read;
+
+       platform_set_drvdata(pdev, trng);
+       ret = devm_hwrng_register(&pdev->dev, trng);
+       if (ret)
+               return -ENOENT;
+
+       dev_info(&pdev->dev,
+                "ARM SMCCC TRNG firmware random number generator v%d.%d\n",
+                version >> 16, version & 0xffff);
+
+       return 0;
+}
+
+static struct platform_driver smccc_trng_driver = {
+       .driver = {
+               .name           = "smccc_trng",
+       },
+       .probe          = smccc_trng_probe,
+};
+
+static int __init smccc_trng_driver_init(void)
+{
+       smccc_trng_pdev = platform_device_register_simple("smccc_trng",
+                                                         -1, NULL, 0);
+       if (IS_ERR(smccc_trng_pdev))
+               return PTR_ERR(smccc_trng_pdev);
+
+       return platform_driver_register(&smccc_trng_driver);
+}
+module_init(smccc_trng_driver_init);
+
+static void __exit smccc_trng_driver_exit(void)
+{
+       platform_driver_unregister(&smccc_trng_driver);
+       platform_device_unregister(smccc_trng_pdev);
+}
+module_exit(smccc_trng_driver_exit);
+
+MODULE_AUTHOR("Andre Przywara");
+MODULE_LICENSE("GPL");
--
Quoted 2 lines

2.17.6

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#2 lore raw

On Tue, 20 Jul 2021 18:03:37 +0200
Ard Biesheuvel <[email protected]> wrote:

Hi Ard,

Quoted 105 lines · Andre Przywara
Quoted 104 lines

The "Arm True Random Number Generator Firmware Interface"[1] provides an SMCCC based interface to a true hardware random number generator. So far we are using that in arch_get_random_seed(), but it might be useful to expose the entropy through the /dev/hwrng device as well. This allows to assess the quality of the implementation, by using "rngtest" from the rng-tools package, for example.

Add a simple platform driver implementing the hw_random interface. We unconditionally instantiate the platform device in the driver file, then probe for the existence of the SMCCC TRNG implementation in the driver's probe routine.
Since the firmware takes care about serialisation, this can happily coexist with the arch_get_random_seed() bits.

[1] https://developer.arm.com/documentation/den0098/latest/
---
Changelog v1 ... v2:
- fix building as a module
- de-register device upon exit
- mention module name in Kconfig

 drivers/char/hw_random/Kconfig          |  14 ++
 drivers/char/hw_random/Makefile         |   1 +
 drivers/char/hw_random/arm_smccc_trng.c | 171 ++++++++++++++++++++++++
 3 files changed, 186 insertions(+)
 create mode 100644 drivers/char/hw_random/arm_smccc_trng.c
drivers/char/hw_random/Kconfig +14 -0
index 3f166c8a4099..239eca4d6805 100644
@@ -524,6 +524,20 @@ config HW_RANDOM_XIPHERA
          To compile this driver as a module, choose M here: the
          module will be called xiphera-trng.
 
+config HW_RANDOM_ARM_SMCCC_TRNG
+       tristate "Arm SMCCC TRNG firmware interface support"
+       depends on HAVE_ARM_SMCCC_DISCOVERY
+       default HW_RANDOM
+       help
+         Say 'Y' to enable the True Random Number Generator driver using
+         the Arm SMCCC TRNG firmware interface. This reads entropy from
+         higher exception levels (firmware, hypervisor). Uses SMCCC for
+         communicating with the firmware:
+         https://developer.arm.com/documentation/den0098/latest/
+
+         To compile this driver as a module, choose M here: the
+         module will be called arm_smccc_trng.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
drivers/char/hw_random/Makefile +1 -0
index 8933fada74f2..a5a1c765a394 100644
@@ -45,3 +45,4 @@ obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
 obj-$(CONFIG_HW_RANDOM_NPCM) += npcm-rng.o
 obj-$(CONFIG_HW_RANDOM_CCTRNG) += cctrng.o
 obj-$(CONFIG_HW_RANDOM_XIPHERA) += xiphera-trng.o
+obj-$(CONFIG_HW_RANDOM_ARM_SMCCC_TRNG) += arm_smccc_trng.o
drivers/char/hw_random/arm_smccc_trng.c new file +34 -0
new file mode 100644
index 000000000000..3bd510a98882
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Randomness driver for the ARM SMCCC TRNG Firmware Interface
+ * https://developer.arm.com/documentation/den0098/latest/
+ *
+ *  Copyright (C) 2020 Arm Ltd.
+ *
+ * The ARM TRNG firmware interface specifies a protocol to read entropy
+ * from a higher exception level, to abstract from any machine specific
+ * implemenations and allow easier use in hypervisors.
+ *
+ * The firmware interface is realised using the SMCCC specification.
+ */
+
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/hw_random.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/arm-smccc.h>
+
+#ifdef CONFIG_ARM64
+#define ARM_SMCCC_TRNG_RND     ARM_SMCCC_TRNG_RND64
+#define MAX_BITS_PER_CALL      (3 * 64UL)
+#else
+#define ARM_SMCCC_TRNG_RND     ARM_SMCCC_TRNG_RND32
+#define MAX_BITS_PER_CALL      (3 * 32UL)
+#endif
+
+/* We don't want to allow the firmware to stall us forever. */
+#define SMCCC_TRNG_MAX_TRIES   20
+
+#define SMCCC_RET_TRNG_INVALID_PARAMETER       -2
+#define SMCCC_RET_TRNG_NO_ENTROPY              -3
Quoted 8 lines

drivers/char/hw_random/arm_smccc_trng.c line 37

Quoted 3 lines
drivers/char/hw_random/arm_smccc_trng.c new file +3 -0
+
+static struct platform_device *smccc_trng_pdev;
+  

Can we split the platform device and the platform driver? The platform device should be registered by the core code once it discovers the SMCCC TRNG availabily. The platform driver can then use ordinary module alias autoloading etc based on the platform device availabilty.

Yes, a similar idea was already brought up before. I think there is even the potential for something like an artificial SMCCC "bus", where those services presentable as devices could be auto-detected (by checking known function IDs), the respective drivers would then probe automatically?

I will try to implement your approach first, to see what it looks like.

Cheers,
Andre

Quoted 146 lines

This requires the following to be added though

MODULE_ALIAS("platform: smccc_trng")

but all the smccc calls could be dropped from the probe function in that case.

Quoted 137 lines
drivers/char/hw_random/arm_smccc_trng.c new file +134 -1
+static int smccc_trng_init(struct hwrng *rng)
+{
+       return 0;
+}
+
+static int copy_from_registers(char *buf, struct arm_smccc_res *res,
+                              size_t bytes)
+{
+       unsigned int chunk, copied;
+
+       if (bytes == 0)
+               return 0;
+
+       chunk = min(bytes, sizeof(long));
+       memcpy(buf, &res->a3, chunk);
+       copied = chunk;
+       if (copied >= bytes)
+               return copied;
+
+       chunk = min((bytes - copied), sizeof(long));
+       memcpy(&buf[copied], &res->a2, chunk);
+       copied += chunk;
+       if (copied >= bytes)
+               return copied;
+
+       chunk = min((bytes - copied), sizeof(long));
+       memcpy(&buf[copied], &res->a1, chunk);
+
+       return copied + chunk;
+}
+
+static int smccc_trng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+       struct arm_smccc_res res;
+       u8 *buf = data;
+       unsigned int copied = 0;
+       int tries = 0;
+
+       while (copied < max) {
+               size_t bits = min_t(size_t, (max - copied) * BITS_PER_BYTE,
+                                 MAX_BITS_PER_CALL);
+
+               arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_RND, bits, &res);
+               if ((int)res.a0 < 0)
+                       return (int)res.a0;
+
+               switch ((int)res.a0) {
+               case SMCCC_RET_SUCCESS:
+                       copied += copy_from_registers(buf + copied, &res,
+                                                     bits / BITS_PER_BYTE);
+                       tries = 0;
+                       break;
+               case SMCCC_RET_TRNG_NO_ENTROPY:
+                       if (!wait)
+                               return copied;
+                       tries++;
+                       if (tries >= SMCCC_TRNG_MAX_TRIES)
+                               return copied;
+                       cond_resched();
+                       break;
+               }
+       }
+
+       return copied;
+}
+
+static int smccc_trng_probe(struct platform_device *pdev)
+{
+       struct arm_smccc_res res;
+       struct hwrng *trng;
+       u32 version;
+       int ret;
+
+       /* We need ARM SMCCC v1.1, with its autodetection feature. */
+       if (arm_smccc_get_version() < ARM_SMCCC_VERSION_1_1)
+               return -ENODEV;
+
+       arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_VERSION, &res);
+       if ((int)res.a0 < 0)
+               return -ENODEV;
+       version = res.a0;
+
+       arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_FEATURES,
+                            ARM_SMCCC_TRNG_RND, &res);
+       if ((int)res.a0 < 0)
+               return -ENODEV;
+
+       trng = devm_kzalloc(&pdev->dev, sizeof(*trng), GFP_KERNEL);
+       if (!trng)
+               return -ENOMEM;
+
+       trng->name = "smccc_trng";
+       trng->init = smccc_trng_init;
+       trng->read = smccc_trng_read;
+
+       platform_set_drvdata(pdev, trng);
+       ret = devm_hwrng_register(&pdev->dev, trng);
+       if (ret)
+               return -ENOENT;
+
+       dev_info(&pdev->dev,
+                "ARM SMCCC TRNG firmware random number generator v%d.%d\n",
+                version >> 16, version & 0xffff);
+
+       return 0;
+}
+
+static struct platform_driver smccc_trng_driver = {
+       .driver = {
+               .name           = "smccc_trng",
+       },
+       .probe          = smccc_trng_probe,
+};
+
+static int __init smccc_trng_driver_init(void)
+{
+       smccc_trng_pdev = platform_device_register_simple("smccc_trng",
+                                                         -1, NULL, 0);
+       if (IS_ERR(smccc_trng_pdev))
+               return PTR_ERR(smccc_trng_pdev);
+
+       return platform_driver_register(&smccc_trng_driver);
+}
+module_init(smccc_trng_driver_init);
+
+static void __exit smccc_trng_driver_exit(void)
+{
+       platform_driver_unregister(&smccc_trng_driver);
+       platform_device_unregister(smccc_trng_pdev);
+}
+module_exit(smccc_trng_driver_exit);
+
+MODULE_AUTHOR("Andre Przywara");
+MODULE_LICENSE("GPL");
--

2.17.6

#3 lore raw
Quoted 5 lines · Andre Przywara

Yes, a similar idea was already brought up before. I think there is even the potential for something like an artificial SMCCC "bus", where those services presentable as devices could be auto-detected (by checking known function IDs), the respective drivers would then probe automatically?

Sounds like a boot time killer... can we instead describe them in DT and/or ACPI ?

Cheers,
Ben.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#4 lore raw

On Wed, 21 Jul 2021 08:02:42 +1000
Benjamin Herrenschmidt <[email protected]> wrote:

Hi,

Quoted 8 lines · Andre Przywara
Quoted 5 lines

Yes, a similar idea was already brought up before. I think there is even the potential for something like an artificial SMCCC "bus", where those services presentable as devices could be auto-detected (by checking known function IDs), the respective drivers would then probe automatically?

Sounds like a boot time killer...

How so? To be clear, at the moment there is basically just the TRNG service we would probe for, maybe FF-A, then adding as we go. But in any case it would be just a handful, and querying is very quick (SMC/HVC, then just a switch/case on the other side, and ERET). Is there any particular scenario you are concerned about? Quick starting guests?

Quoted 1 line

can we instead describe them in DT and/or ACPI ?

I think part of the idea of SMCCC is that it does NOT need firmware advertisement, but can instead be discovered, through a safe interface.

Cheers,
Andre

#5 lore raw
Quoted 10 lines · Andre Przywara
Quoted 7 lines · On Wed, 21 Jul 2021 08:02:42 +1000 Benjamin Herrenschmidt…
Quoted 5 lines · Andre Przywara

Yes, a similar idea was already brought up before. I think there is even the potential for something like an artificial SMCCC "bus", where those services presentable as devices could be auto-detected (by checking known function IDs), the respective drivers would then probe automatically?

Quoted 8 lines
Quoted 1 line

Sounds like a boot time killer...

How so? To be clear, at the moment there is basically just the TRNG service we would probe for, maybe FF-A, then adding as we go. But in any case it would be just a handful, and querying is very quick (SMC/HVC, then just a switch/case on the other side, and ERET). Is there any particular scenario you are concerned about? Quick starting guests?

It's also worth pointing out that we're already doing the enumeration part, making things a bus would just be about reorganising the code that checks if services are present to a central place so it looks more Linux style. If anything I'd guess that if we get to the point where things are slow enough to worry about having that code in one central place would make doing something about it easier (eg, adding a "list all services" service or firmware binding).

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel