acpi: pcihp: fix hotplug when bridge is wired to function > 0
cover acpi: pcihp: fix hotplug when bridge is wired to function > 0
For full description see 2/2.
Tested hotplug on Q35 (see 2/2 for reproducer) and PC (with pci-bridge) machines
Igor Mammedov (2):
acpi: x86: pcihp: cleanup devfn usage in
build_append_pci_bus_devices()
acpi: x86: pcihp: add support hotplug on multifunction bridges
hw/i386/acpi-build.c | 42 +++++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 13 deletions(-)
Signature · 1 line
2.27.0
PATCH 1/2 acpi: x86: pcihp: cleanup devfn usage in build_append_pci_bus_devices()
--- hw/i386/acpi-build.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
hw/i386/acpi-build.c +6 -7
@@ -374,7 +374,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,Aml *dev, *notify_method =NULL , *method;QObject *bsel;PCIBus *sec; -int i; +int devfn; bsel =object_property_get_qobject (OBJECT (bus),ACPI_PCIHP_PROP_BSEL ,NULL );if (bsel) {
@@ -384,11 +384,11 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, notify_method =aml_method ("DVNT" ,2 ,AML_NOTSERIALIZED ); } -for (i =0 ; i <ARRAY_SIZE (bus->devices); i +=PCI_FUNC_MAX ) { +for (devfn =0 ; devfn <ARRAY_SIZE (bus->devices); devfn++) {DeviceClass *dc;PCIDeviceClass *pc; -PCIDevice *pdev = bus->devices[i]; -int slot =PCI_SLOT (i); +PCIDevice *pdev = bus->devices[devfn]; +int slot =PCI_SLOT (devfn);bool hotplug_enabled_dev;bool bridge_in_acpi;bool cold_plugged_bridge;
@@ -525,13 +525,12 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,/* Notify about child bus events in any case */ if (pcihp_bridge_en) { QLIST_FOREACH(sec, &bus->child, sibling) { -int32_t devfn = sec->parent_dev->devfn; -if (pci_bus_is_root (sec)) {continue ; } -aml_append (method,aml_name ("^S%.02X.PCNT" , devfn)); +aml_append (method,aml_name ("^S%.02X.PCNT" , + sec->parent_dev->devfn)); } }
Signature · 1 line
2.27.0
Re: [PATCH 1/2] acpi: x86: pcihp: cleanup devfn usage in build_append_pci_bus_devices()
I would add a description: we want to scan all functions not just function 0 to describe hotplug into bridges at function != 0. in preparation for this, refactor code to not skip functions != 0.
Quoted 23 lines · Igor Mammedov
Signed-off-by Igor Mammedov <[email protected]>--- hw/i386/acpi-build.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)hw/i386/acpi-build.c +1
-2@@ -374,7 +374,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,Aml *dev, *notify_method =NULL , *method;QObject *bsel;PCIBus *sec; -int i; +int devfn; bsel =object_property_get_qobject (OBJECT (bus),ACPI_PCIHP_PROP_BSEL ,NULL );if (bsel) {@@ -384,11 +384,11 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, notify_method =aml_method ("DVNT" ,2 ,AML_NOTSERIALIZED ); } -for (i =0 ; i <ARRAY_SIZE (bus->devices); i +=PCI_FUNC_MAX ) {
hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 394
Quoted 10 lines
hw/i386/acpi-build.c +3
-2+for (devfn =0 ; devfn <ARRAY_SIZE (bus->devices); devfn++) {DeviceClass *dc;PCIDeviceClass *pc; -PCIDevice *pdev = bus->devices[i]; -int slot =PCI_SLOT (i); +PCIDevice *pdev = bus->devices[devfn]; +int slot =PCI_SLOT (devfn);bool hotplug_enabled_dev;bool bridge_in_acpi;bool cold_plugged_bridge;
I am a bit puzzled about why this is equivalent. so we used to scan just function 0 on each slot. now we are scanning them all.
won't this generate a different AML code? in fact duplicate descriptions?
I suspect you need to move the check for slot == 0 from the next patch to this one otherwise bisect will be broken.
Or just squash this part into next patch. up to you.
Quoted 6 lines
hw/i386/acpi-build.c +0
-2@@ -525,13 +525,12 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,/* Notify about child bus events in any case */ if (pcihp_bridge_en) { QLIST_FOREACH(sec, &bus->child, sibling) { -int32_t devfn = sec->parent_dev->devfn; -
hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 536
Quoted 10 lines
hw/i386/acpi-build.c +2
-1if (pci_bus_is_root (sec)) {continue ; } -aml_append (method,aml_name ("^S%.02X.PCNT" , devfn)); +aml_append (method,aml_name ("^S%.02X.PCNT" , + sec->parent_dev->devfn)); } }
this is a refactor, sure.
Quoted 2 lines
Signature · 1 line
2.27.0
Re: [PATCH 1/2] acpi: x86: pcihp: cleanup devfn usage in build_append_pci_bus_devices()
Quoted 38 lines · On Thu, 22 Jul 2021 13:56:18 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
I would add a description: we want to scan all functions not just function 0 to describe hotplug into bridges at function != 0. in preparation for this, refactor code to not skip functions != 0.
Quoted 32 lines · Igor Mammedov
Signed-off-by Igor Mammedov <[email protected]>--- hw/i386/acpi-build.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)hw/i386/acpi-build.c +4
-4@@ -374,7 +374,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,Aml *dev, *notify_method =NULL , *method;QObject *bsel;PCIBus *sec; -int i; +int devfn; bsel =object_property_get_qobject (OBJECT (bus),ACPI_PCIHP_PROP_BSEL ,NULL );if (bsel) {@@ -384,11 +384,11 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, notify_method =aml_method ("DVNT" ,2 ,AML_NOTSERIALIZED ); } -for (i =0 ; i <ARRAY_SIZE (bus->devices); i +=PCI_FUNC_MAX ) { +for (devfn =0 ; devfn <ARRAY_SIZE (bus->devices); devfn++) {DeviceClass *dc;PCIDeviceClass *pc; -PCIDevice *pdev = bus->devices[i]; -int slot =PCI_SLOT (i); +PCIDevice *pdev = bus->devices[devfn]; +int slot =PCI_SLOT (devfn);bool hotplug_enabled_dev;bool bridge_in_acpi;
Quoted 8 lines
hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 394
Quoted 1 line
hw/i386/acpi-build.c +0
-0bool cold_plugged_bridge;I am a bit puzzled about why this is equivalent. so we used to scan just function 0 on each slot. now we are scanning them all.
won't this generate a different AML code? in fact duplicate descriptions?
I suspect you need to move the check for slot == 0 from the next patch to this one otherwise bisect will be broken.
this was my mistake when splitting it into separate patch, I shouldn't have touched += PCI_FUNC_MAX here, point of the patch was to s/i/devfn/m so it won't distract from what the next patch is doing.
Quoted 1 line
Or just squash this part into next patch. up to you.
ok I'll squash it into next.
Quoted 24 lines
Quoted 7 lines
hw/i386/acpi-build.c +0
-2@@ -525,13 +525,12 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,/* Notify about child bus events in any case */ if (pcihp_bridge_en) { QLIST_FOREACH(sec, &bus->child, sibling) { -int32_t devfn = sec->parent_dev->devfn; -hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 536
Quoted 10 lines
hw/i386/acpi-build.c +2
-1if (pci_bus_is_root (sec)) {continue ; } -aml_append (method,aml_name ("^S%.02X.PCNT" , devfn)); +aml_append (method,aml_name ("^S%.02X.PCNT" , + sec->parent_dev->devfn)); } }this is a refactor, sure.
Quoted 2 lines
Signature · 1 line
2.27.0
PATCH 2/2 acpi: x86: pcihp: add support hotplug on multifunction bridges
In reply to Igor MammedovCommit 17858a1695 (hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35) switched PCI hotplug from native to ACPI one by default.
That however breaks ihotplug on following CLI that used to work:
-nodefaults -machine q35 \
-device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \
-device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2
where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT], AE_NOT_FOUND (20201113/psargs-330) ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)
cause is that QEMU's ACPI hotplug never supported functions other then 0 and due to bug it was generating notification entries for not described functions.
Technically there is no reason not to describe cold-plugged bridges (root ports) on functions other then 0, as they similaraly to bridge on function 0 are unpluggable.
Fix consists of describing cold-plugged bridges[root ports] on functions other than 0.
--- hw/i386/acpi-build.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-)
hw/i386/acpi-build.c +24 -7
@@ -364,7 +364,7 @@ static void build_append_pcihp_notify_entry(Aml *method, int slot)int32_t devfn =PCI_DEVFN (slot,0 ); if_ctx =aml_if (aml_and (aml_arg (0 ),aml_int (0x1U << slot),NULL )); -aml_append (if_ctx,aml_notify (aml_name ("S%.02X" , devfn),aml_arg (1 ))); +aml_append (if_ctx,aml_notify (aml_name ("^S%.03X" , devfn),aml_arg (1 )));aml_append (method, if_ctx); }
@@ -389,18 +389,26 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,PCIDeviceClass *pc;PCIDevice *pdev = bus->devices[devfn];int slot =PCI_SLOT (devfn); +int func =PCI_FUNC (devfn); +/* ACPI spec: 1.0b: Table 6-2 _ADR Object Bus Types, PCI type */ +int adr = slot <<16 | func;bool hotplug_enabled_dev;bool bridge_in_acpi;bool cold_plugged_bridge;if (!pdev) { -if (bsel) {/* add hotplug slots for non present devices */ +/* +* add hotplug slots for non present devices. +* hotplug is supported only for non-multifunction device +* so generate device description only for function 0 +*/ +if (bsel && !PCI_FUNC (devfn)) {if (pci_bus_is_express (bus) && slot >0 ) {break ; } - dev =aml_device ("S%.02X" ,PCI_DEVFN (slot,0 )); + dev =aml_device ("S%.03X" , devfn);aml_append (dev,aml_name_decl ("_SUN" ,aml_int (slot))); -aml_append (dev,aml_name_decl ("_ADR" ,aml_int (slot <<16 ))); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (adr))); method =aml_method ("_EJ0" ,1 ,AML_NOTSERIALIZED );aml_append (method, aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))
@@ -436,9 +444,18 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,continue ; } +/* +* allow describing coldplugged bridges in ACPI even if they are not +* on function 0, as they are not unpluggale, for all other devices +* generate description only for function 0 per slot +*/ +if (PCI_FUNC (devfn) && !bridge_in_acpi) { +continue ; + } +/* start to compose PCI slot descriptor */ - dev =aml_device ("S%.02X" ,PCI_DEVFN (slot,0 )); -aml_append (dev,aml_name_decl ("_ADR" ,aml_int (slot <<16 ))); + dev =aml_device ("S%.03X" , devfn); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (adr)));if (bsel) {/*
@@ -529,7 +546,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,continue ; } -aml_append (method,aml_name ("^S%.02X.PCNT" , +aml_append (method,aml_name ("^S%.03X.PCNT" , sec->parent_dev->devfn)); } }
Signature · 1 line
2.27.0
Re: [PATCH 2/2] acpi: x86: pcihp: add support hotplug on multifunction bridges
Quoted 26 lines · Igor Mammedov
Commit
17858a1695(hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35) switched PCI hotplug from native to ACPI one by default.That however breaks ihotplug on following CLI that used to work:
-nodefaults -machine q35 \ -device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \ -device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT],
AE_NOT_FOUND(20201113/psargs-330) ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error:AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)cause is that QEMU's ACPI hotplug never supported functions other then 0 and due to bug it was generating notification entries for not described functions.
Technically there is no reason not to describe cold-plugged bridges (root ports) on functions other then 0, as they similaraly to bridge on function 0 are unpluggable.
Fix consists of describing cold-plugged bridges[root ports] on functions other than 0.
Quoted 7 lines
Fixes 17858a169508609ca9063c544833e5a1adeb7b52Signed-off-by Igor Mammedov <[email protected]>Reported-by Laurent Vivier <[email protected]>--- hw/i386/acpi-build.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-)
Re: [PATCH 2/2] acpi: x86: pcihp: add support hotplug on multifunction bridges
In reply to Igor MammedovQuoted 4 lines · Igor Mammedov
Commit
17858a1695(hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35) switched PCI hotplug from native to ACPI one by default.That however breaks ihotplug on following CLI that used to work:
s/ihotplug/hotplug/ ?
Quoted 15 lines
-nodefaults -machine q35 \ -device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \ -device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT],
AE_NOT_FOUND(20201113/psargs-330) ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error:AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)cause is that QEMU's ACPI hotplug never supported functions other then 0 and due to bug it was generating notification entries for not described functions.
Quoted 6 lines
Technically there is no reason not to describe cold-plugged bridges (root ports) on functions other then 0, as they similaraly to bridge on function 0 are unpluggable.
Fix consists of describing cold-plugged bridges[root ports] on functions other than 0.
I would add: since we need to describe multifunction devices
Quoted 2 lines
Fixes 17858a169508609ca9063c544833e5a1adeb7b52
use short hash and include subject within ("subject here") please
Quoted 11 lines
Signed-off-by Igor Mammedov <[email protected]>Reported-by Laurent Vivier <[email protected]>--- hw/i386/acpi-build.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-)hw/i386/acpi-build.c +0
-0
hw/i386/acpi-build.c static void build_append_pcihp_notify_entry(Aml *method, int slot) · line 370
Quoted 8 lines
hw/i386/acpi-build.c +1
-1@@ -364,7 +364,7 @@ static void build_append_pcihp_notify_entry(Aml *method, int slot)int32_t devfn =PCI_DEVFN (slot,0 ); if_ctx =aml_if (aml_and (aml_arg (0 ),aml_int (0x1U << slot),NULL )); -aml_append (if_ctx,aml_notify (aml_name ("S%.02X" , devfn),aml_arg (1 ))); +aml_append (if_ctx,aml_notify (aml_name ("^S%.03X" , devfn),aml_arg (1 )));aml_append (method, if_ctx); }
why are you adding a parent prefix here? anything wrong with relying on search rules?
Seems like an unrelated change.
Also there's always 8 bit in devfn. Why do we need an extra 0?
Quoted 9 lines
hw/i386/acpi-build.c +3
-0@@ -389,18 +389,26 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,PCIDeviceClass *pc;PCIDevice *pdev = bus->devices[devfn];int slot =PCI_SLOT (devfn); +int func =PCI_FUNC (devfn); +/* ACPI spec: 1.0b: Table 6-2 _ADR Object Bus Types, PCI type */ +int adr = slot <<16 | func;bool hotplug_enabled_dev;bool bridge_in_acpi;
hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 405
Quoted 10 lines
hw/i386/acpi-build.c +6
-1bool cold_plugged_bridge;if (!pdev) { -if (bsel) {/* add hotplug slots for non present devices */ +/* +* add hotplug slots for non present devices. +* hotplug is supported only for non-multifunction device +* so generate device description only for function 0 +*/ +if (bsel && !PCI_FUNC (devfn)) {
replace with func here and elsewhere?
Quoted 12 lines
hw/i386/acpi-build.c +2
-2if (pci_bus_is_express (bus) && slot >0 ) {break ; } - dev =aml_device ("S%.02X" ,PCI_DEVFN (slot,0 )); + dev =aml_device ("S%.03X" , devfn);aml_append (dev,aml_name_decl ("_SUN" ,aml_int (slot))); -aml_append (dev,aml_name_decl ("_ADR" ,aml_int (slot <<16 ))); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (adr))); method =aml_method ("_EJ0" ,1 ,AML_NOTSERIALIZED );aml_append (method, aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))
hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 449
Quoted 6 lines
hw/i386/acpi-build.c +3
-0@@ -436,9 +444,18 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,continue ; } +/* +* allow describing coldplugged bridges in ACPI even if they are not +* on function 0, as they are not unpluggale, for all other devices
unpluggable
Quoted 25 lines
hw/i386/acpi-build.c +9
-3+* generate description only for function 0 per slot +*/ +if (PCI_FUNC (devfn) && !bridge_in_acpi) { +continue ; + } +/* start to compose PCI slot descriptor */ - dev =aml_device ("S%.02X" ,PCI_DEVFN (slot,0 )); -aml_append (dev,aml_name_decl ("_ADR" ,aml_int (slot <<16 ))); + dev =aml_device ("S%.03X" , devfn); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (adr)));if (bsel) {/* @@ -529,7 +546,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,continue ; } -aml_append (method,aml_name ("^S%.02X.PCNT" , +aml_append (method,aml_name ("^S%.03X.PCNT" , sec->parent_dev->devfn)); } }Signature · 1 line
2.27.0
Re: [PATCH 2/2] acpi: x86: pcihp: add support hotplug on multifunction bridges
Quoted 1 line · Michael S. Tsirkin
On Thu, Jul 22, 2021 at 06:59:45AM -0400, Igor Mammedov wrote:
...
Quoted 4 lines
Quoted 2 lines
Fixes 17858a169508609ca9063c544833e5a1adeb7b52use short hash and include subject within ("subject here") please
Tips:
some people use
.gitconfig
[pretty]
fixes = Fixes: %h (\"%s\")%nCc: %aE
[alias]
showfix = log -1 --format=fixes$ git showfix 17858a169508609ca9063c544833e5a1adeb7b52
Fixes: 17858a169508 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
Cc: [email protected]Thanks,
Laurent
Re: [PATCH 2/2] acpi: x86: pcihp: add support hotplug on multifunction bridges
In reply to Michael S. TsirkinQuoted 27 lines · On Thu, 22 Jul 2021 13:49:34 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 4 lines · Igor Mammedov
Commit
17858a1695(hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35) switched PCI hotplug from native to ACPI one by default.That however breaks ihotplug on following CLI that used to work:
s/ihotplug/hotplug/ ?
Quoted 19 lines
-nodefaults -machine q35 \ -device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \ -device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT],
AE_NOT_FOUND(20201113/psargs-330) ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error:AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)cause is that QEMU's ACPI hotplug never supported functions other then 0 and due to bug it was generating notification entries for not described functions.
Technically there is no reason not to describe cold-plugged bridges (root ports) on functions other then 0, as they similaraly to bridge on function 0 are unpluggable.
Quoted 5 lines
Quoted 2 lines
Fix consists of describing cold-plugged bridges[root ports] on functions other than 0.
I would add: since we need to describe multifunction devices
ok
Quoted 19 lines
Quoted 3 lines
Fixes 17858a169508609ca9063c544833e5a1adeb7b52use short hash and include subject within ("subject here") please
Quoted 13 lines
Signed-off-by Igor Mammedov <[email protected]>Reported-by Laurent Vivier <[email protected]>--- hw/i386/acpi-build.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-)hw/i386/acpi-build.c +0
-0@@ -364,7 +364,7 @@ static void build_append_pcihp_notify_entry(Aml *method, int slot)int32_t devfn =PCI_DEVFN (slot,0 );
Quoted 10 lines
hw/i386/acpi-build.c static void build_append_pcihp_notify_entry(Aml *method, int slot) · line 370
Quoted 6 lines
hw/i386/acpi-build.c +1
-1if_ctx =aml_if (aml_and (aml_arg (0 ),aml_int (0x1U << slot),NULL )); -aml_append (if_ctx,aml_notify (aml_name ("S%.02X" , devfn),aml_arg (1 ))); +aml_append (if_ctx,aml_notify (aml_name ("^S%.03X" , devfn),aml_arg (1 )));aml_append (method, if_ctx); }why are you adding a parent prefix here? anything wrong with relying on search rules?
Seems like an unrelated change.
it's remnants from time I was trying to figure out why functions weren't visible, I'll drop it.
Quoted 1 line
Also there's always 8 bit in devfn. Why do we need an extra 0?
2 digits hold slot value, like it used to be and
the last one to hold function. Basically like it's shown in PCI.FW spec example.
but if you prefer to print raw devfn I can change to that, it should work as well.
Quoted 11 lines
Quoted 11 lines
hw/i386/acpi-build.c +3
-0@@ -389,18 +389,26 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,PCIDeviceClass *pc;PCIDevice *pdev = bus->devices[devfn];int slot =PCI_SLOT (devfn); +int func =PCI_FUNC (devfn); +/* ACPI spec: 1.0b: Table 6-2 _ADR Object Bus Types, PCI type */ +int adr = slot <<16 | func;bool hotplug_enabled_dev;bool bridge_in_acpi;bool cold_plugged_bridge;
Quoted 10 lines
hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 405
Quoted 8 lines
hw/i386/acpi-build.c +6
-1if (!pdev) { -if (bsel) {/* add hotplug slots for non present devices */ +/* +* add hotplug slots for non present devices. +* hotplug is supported only for non-multifunction device +* so generate device description only for function 0 +*/ +if (bsel && !PCI_FUNC (devfn)) {replace with func here and elsewhere?
ok
Quoted 49 lines
Quoted 13 lines
hw/i386/acpi-build.c +2
-2if (pci_bus_is_express (bus) && slot >0 ) {break ; } - dev =aml_device ("S%.02X" ,PCI_DEVFN (slot,0 )); + dev =aml_device ("S%.03X" , devfn);aml_append (dev,aml_name_decl ("_SUN" ,aml_int (slot))); -aml_append (dev,aml_name_decl ("_ADR" ,aml_int (slot <<16 ))); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (adr))); method =aml_method ("_EJ0" ,1 ,AML_NOTSERIALIZED );aml_append (method, aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 449
Quoted 6 lines
hw/i386/acpi-build.c +3
-0@@ -436,9 +444,18 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,continue ; } +/* +* allow describing coldplugged bridges in ACPI even if they are not +* on function 0, as they are not unpluggale, for all other devices unpluggable
Quoted 25 lines
hw/i386/acpi-build.c +9
-3+* generate description only for function 0 per slot +*/ +if (PCI_FUNC (devfn) && !bridge_in_acpi) { +continue ; + } +/* start to compose PCI slot descriptor */ - dev =aml_device ("S%.02X" ,PCI_DEVFN (slot,0 )); -aml_append (dev,aml_name_decl ("_ADR" ,aml_int (slot <<16 ))); + dev =aml_device ("S%.03X" , devfn); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (adr)));if (bsel) {/* @@ -529,7 +546,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,continue ; } -aml_append (method,aml_name ("^S%.02X.PCNT" , +aml_append (method,aml_name ("^S%.03X.PCNT" , sec->parent_dev->devfn)); } }Signature · 1 line
2.27.0
Re: [PATCH 2/2] acpi: x86: pcihp: add support hotplug on multifunction bridges
Quoted 71 lines · Igor Mammedov
Quoted 27 lines · On Thu, 22 Jul 2021 13:49:34 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 4 lines · Igor Mammedov
Commit
17858a1695(hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35) switched PCI hotplug from native to ACPI one by default.That however breaks ihotplug on following CLI that used to work:
s/ihotplug/hotplug/ ?
Quoted 19 lines
-nodefaults -machine q35 \ -device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \ -device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT],
AE_NOT_FOUND(20201113/psargs-330) ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error:AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)cause is that QEMU's ACPI hotplug never supported functions other then 0 and due to bug it was generating notification entries for not described functions.
Technically there is no reason not to describe cold-plugged bridges (root ports) on functions other then 0, as they similaraly to bridge on function 0 are unpluggable.
Quoted 5 lines
Quoted 2 lines
Fix consists of describing cold-plugged bridges[root ports] on functions other than 0.
I would add: since we need to describe multifunction devices
ok
Quoted 19 lines
Quoted 3 lines
Fixes 17858a169508609ca9063c544833e5a1adeb7b52use short hash and include subject within ("subject here") please
Quoted 13 lines
Signed-off-by Igor Mammedov <[email protected]>Reported-by Laurent Vivier <[email protected]>--- hw/i386/acpi-build.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-)hw/i386/acpi-build.c +0
-0@@ -364,7 +364,7 @@ static void build_append_pcihp_notify_entry(Aml *method, int slot)int32_t devfn =PCI_DEVFN (slot,0 );Quoted 10 lines
hw/i386/acpi-build.c static void build_append_pcihp_notify_entry(Aml *method, int slot) · line 370
Quoted 6 lines
hw/i386/acpi-build.c +1
-1if_ctx =aml_if (aml_and (aml_arg (0 ),aml_int (0x1U << slot),NULL )); -aml_append (if_ctx,aml_notify (aml_name ("S%.02X" , devfn),aml_arg (1 ))); +aml_append (if_ctx,aml_notify (aml_name ("^S%.03X" , devfn),aml_arg (1 )));aml_append (method, if_ctx); }why are you adding a parent prefix here? anything wrong with relying on search rules?
Seems like an unrelated change.it's remnants from time I was trying to figure out why functions weren't visible, I'll drop it.
Quoted 6 lines
Quoted 1 line
Also there's always 8 bit in devfn. Why do we need an extra 0?
2 digits hold slot value, like it used to be and
the last one to hold function. Basically like it's shown in PCI.FW spec example.but if you prefer to print raw devfn I can change to that, it should work as well.
will make the patch smaller, won't it? we can always change it separately to match spec examples more closely.
Quoted 73 lines
Quoted 11 lines
Quoted 11 lines
hw/i386/acpi-build.c +3
-0@@ -389,18 +389,26 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,PCIDeviceClass *pc;PCIDevice *pdev = bus->devices[devfn];int slot =PCI_SLOT (devfn); +int func =PCI_FUNC (devfn); +/* ACPI spec: 1.0b: Table 6-2 _ADR Object Bus Types, PCI type */ +int adr = slot <<16 | func;bool hotplug_enabled_dev;bool bridge_in_acpi;bool cold_plugged_bridge;Quoted 10 lines
hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 405
Quoted 8 lines
hw/i386/acpi-build.c +6
-1if (!pdev) { -if (bsel) {/* add hotplug slots for non present devices */ +/* +* add hotplug slots for non present devices. +* hotplug is supported only for non-multifunction device +* so generate device description only for function 0 +*/ +if (bsel && !PCI_FUNC (devfn)) {replace with func here and elsewhere?
ok
Quoted 49 lines
Quoted 13 lines
hw/i386/acpi-build.c +2
-2if (pci_bus_is_express (bus) && slot >0 ) {break ; } - dev =aml_device ("S%.02X" ,PCI_DEVFN (slot,0 )); + dev =aml_device ("S%.03X" , devfn);aml_append (dev,aml_name_decl ("_SUN" ,aml_int (slot))); -aml_append (dev,aml_name_decl ("_ADR" ,aml_int (slot <<16 ))); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (adr))); method =aml_method ("_EJ0" ,1 ,AML_NOTSERIALIZED );aml_append (method, aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 449
Quoted 6 lines
hw/i386/acpi-build.c +3
-0@@ -436,9 +444,18 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,continue ; } +/* +* allow describing coldplugged bridges in ACPI even if they are not +* on function 0, as they are not unpluggale, for all other devices unpluggable
Quoted 25 lines
hw/i386/acpi-build.c +9
-3+* generate description only for function 0 per slot +*/ +if (PCI_FUNC (devfn) && !bridge_in_acpi) { +continue ; + } +/* start to compose PCI slot descriptor */ - dev =aml_device ("S%.02X" ,PCI_DEVFN (slot,0 )); -aml_append (dev,aml_name_decl ("_ADR" ,aml_int (slot <<16 ))); + dev =aml_device ("S%.03X" , devfn); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (adr)));if (bsel) {/* @@ -529,7 +546,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,continue ; } -aml_append (method,aml_name ("^S%.02X.PCNT" , +aml_append (method,aml_name ("^S%.03X.PCNT" , sec->parent_dev->devfn)); } }Signature · 1 line
2.27.0
Re: [PATCH 2/2] acpi: x86: pcihp: add support hotplug on multifunction bridges
Quoted 73 lines · On Fri, 23 Jul 2021 04:05:18 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 72 lines · Igor Mammedov
Quoted 27 lines · On Thu, 22 Jul 2021 13:49:34 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 4 lines · Igor Mammedov
Commit
17858a1695(hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35) switched PCI hotplug from native to ACPI one by default.That however breaks ihotplug on following CLI that used to work:
s/ihotplug/hotplug/ ?
Quoted 19 lines
-nodefaults -machine q35 \ -device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \ -device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT],
AE_NOT_FOUND(20201113/psargs-330) ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error:AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)cause is that QEMU's ACPI hotplug never supported functions other then 0 and due to bug it was generating notification entries for not described functions.
Technically there is no reason not to describe cold-plugged bridges (root ports) on functions other then 0, as they similaraly to bridge on function 0 are unpluggable.
Quoted 5 lines
Quoted 2 lines
Fix consists of describing cold-plugged bridges[root ports] on functions other than 0.
I would add: since we need to describe multifunction devices
ok
Quoted 19 lines
Quoted 3 lines
Fixes 17858a169508609ca9063c544833e5a1adeb7b52use short hash and include subject within ("subject here") please
Quoted 13 lines
Signed-off-by Igor Mammedov <[email protected]>Reported-by Laurent Vivier <[email protected]>--- hw/i386/acpi-build.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-)hw/i386/acpi-build.c +0
-0@@ -364,7 +364,7 @@ static void build_append_pcihp_notify_entry(Aml *method, int slot)int32_t devfn =PCI_DEVFN (slot,0 );Quoted 10 lines
hw/i386/acpi-build.c static void build_append_pcihp_notify_entry(Aml *method, int slot) · line 370
Quoted 6 lines
hw/i386/acpi-build.c +1
-1if_ctx =aml_if (aml_and (aml_arg (0 ),aml_int (0x1U << slot),NULL )); -aml_append (if_ctx,aml_notify (aml_name ("S%.02X" , devfn),aml_arg (1 ))); +aml_append (if_ctx,aml_notify (aml_name ("^S%.03X" , devfn),aml_arg (1 )));aml_append (method, if_ctx); }why are you adding a parent prefix here? anything wrong with relying on search rules?
Seems like an unrelated change.it's remnants from time I was trying to figure out why functions weren't visible, I'll drop it.
Quoted 1 line
Also there's always 8 bit in devfn. Why do we need an extra 0?
Quoted 8 lines
Quoted 5 lines
2 digits hold slot value, like it used to be and
the last one to hold function. Basically like it's shown in PCI.FW spec example.but if you prefer to print raw devfn I can change to that, it should work as well.
will make the patch smaller, won't it? we can always change it separately to match spec examples more closely.
sure, done
Quoted 75 lines
Quoted 74 lines
Quoted 12 lines
Quoted 12 lines
hw/i386/acpi-build.c +3
-0@@ -389,18 +389,26 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,PCIDeviceClass *pc;PCIDevice *pdev = bus->devices[devfn];int slot =PCI_SLOT (devfn); +int func =PCI_FUNC (devfn); +/* ACPI spec: 1.0b: Table 6-2 _ADR Object Bus Types, PCI type */ +int adr = slot <<16 | func;bool hotplug_enabled_dev;bool bridge_in_acpi;bool cold_plugged_bridge;Quoted 10 lines
hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 405
Quoted 8 lines
hw/i386/acpi-build.c +6
-1if (!pdev) { -if (bsel) {/* add hotplug slots for non present devices */ +/* +* add hotplug slots for non present devices. +* hotplug is supported only for non-multifunction device +* so generate device description only for function 0 +*/ +if (bsel && !PCI_FUNC (devfn)) {replace with func here and elsewhere?
ok
Quoted 49 lines
Quoted 13 lines
hw/i386/acpi-build.c +2
-2if (pci_bus_is_express (bus) && slot >0 ) {break ; } - dev =aml_device ("S%.02X" ,PCI_DEVFN (slot,0 )); + dev =aml_device ("S%.03X" , devfn);aml_append (dev,aml_name_decl ("_SUN" ,aml_int (slot))); -aml_append (dev,aml_name_decl ("_ADR" ,aml_int (slot <<16 ))); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (adr))); method =aml_method ("_EJ0" ,1 ,AML_NOTSERIALIZED );aml_append (method, aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))hw/i386/acpi-build.c static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, · line 449
Quoted 6 lines
hw/i386/acpi-build.c +3
-0@@ -436,9 +444,18 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,continue ; } +/* +* allow describing coldplugged bridges in ACPI even if they are not +* on function 0, as they are not unpluggale, for all other devices unpluggable
Quoted 25 lines
hw/i386/acpi-build.c +9
-3+* generate description only for function 0 per slot +*/ +if (PCI_FUNC (devfn) && !bridge_in_acpi) { +continue ; + } +/* start to compose PCI slot descriptor */ - dev =aml_device ("S%.02X" ,PCI_DEVFN (slot,0 )); -aml_append (dev,aml_name_decl ("_ADR" ,aml_int (slot <<16 ))); + dev =aml_device ("S%.03X" , devfn); +aml_append (dev,aml_name_decl ("_ADR" ,aml_int (adr)));if (bsel) {/* @@ -529,7 +546,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,continue ; } -aml_append (method,aml_name ("^S%.02X.PCNT" , +aml_append (method,aml_name ("^S%.03X.PCNT" , sec->parent_dev->devfn)); } }Signature · 1 line
2.27.0
Re: [PATCH 2/2] acpi: x86: pcihp: add support hotplug on multifunction bridges
In reply to Michael S. TsirkinQuoted 31 lines · Michael S. Tsirkin
Quoted 4 lines · Igor Mammedov
Commit
17858a1695(hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35) switched PCI hotplug from native to ACPI one by default.That however breaks ihotplug on following CLI that used to work:
s/ihotplug/hotplug/ ?
Quoted 15 lines
-nodefaults -machine q35 \ -device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \ -device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT],
AE_NOT_FOUND(20201113/psargs-330) ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error:AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)cause is that QEMU's ACPI hotplug never supported functions other then 0 and due to bug it was generating notification entries for not described functions.
Quoted 6 lines
Technically there is no reason not to describe cold-plugged bridges (root ports) on functions other then 0, as they similaraly to bridge on function 0 are unpluggable.
Fix consists of describing cold-plugged bridges[root ports] on functions other than 0.
Quoted 7 lines
I would add: since we need to describe multifunction devices
Quoted 2 lines
Fixes 17858a169508609ca9063c544833e5a1adeb7b52use short hash and include subject within ("subject here") please
Using short hashes isn't a good idea in commits IMHO. A git short hash is only guaranteed unique at the time it is generated. In future the repo might gain commits that result in a clashing short hash. Using the full hash is good.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Re: [PATCH 2/2] acpi: x86: pcihp: add support hotplug on multifunction bridges
Quoted 40 lines · Daniel P. Berrangé
Quoted 31 lines · Michael S. Tsirkin
Quoted 4 lines · Igor Mammedov
Commit
17858a1695(hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35) switched PCI hotplug from native to ACPI one by default.That however breaks ihotplug on following CLI that used to work:
s/ihotplug/hotplug/ ?
Quoted 15 lines
-nodefaults -machine q35 \ -device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \ -device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT],
AE_NOT_FOUND(20201113/psargs-330) ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error:AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)cause is that QEMU's ACPI hotplug never supported functions other then 0 and due to bug it was generating notification entries for not described functions.
Quoted 6 lines
Technically there is no reason not to describe cold-plugged bridges (root ports) on functions other then 0, as they similaraly to bridge on function 0 are unpluggable.
Fix consists of describing cold-plugged bridges[root ports] on functions other than 0.
Quoted 7 lines
I would add: since we need to describe multifunction devices
Quoted 2 lines
Fixes 17858a169508609ca9063c544833e5a1adeb7b52use short hash and include subject within ("subject here") please
Quoted 8 lines
Using short hashes isn't a good idea in commits IMHO. A git short hash is only guaranteed unique at the time it is generated. In future the repo might gain commits that result in a clashing short hash. Using the full hash is good.
Regards,
Daniel
It's a good point but it became a standard practice at this point. At least with the subject it's unlikely to be ambiguous too often.
Quoted 4 lines
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Re: [PATCH 2/2] acpi: x86: pcihp: add support hotplug on multifunction bridges
In reply to Igor MammedovQuoted 4 lines · Igor Mammedov
Commit
17858a1695(hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35) switched PCI hotplug from native to ACPI one by default.That however breaks ihotplug on following CLI that used to work:
s/ihotplug/hotplug/
Quoted 11 lines
-nodefaults -machine q35 \ -device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \ -device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT],
AE_NOT_FOUND(20201113/psargs-330) ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531) ACPI Error:AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)
Quoted 6 lines
cause is that QEMU's ACPI hotplug never supported functions other then 0 and due to bug it was generating notification entries for not described functions.
Technically there is no reason not to describe cold-plugged bridges (root ports) on functions other then 0, as they similaraly to bridge
s/similaraly/similarly/
Quoted 8 lines
on function 0 are unpluggable.
Fix consists of describing cold-plugged bridges[root ports] on functions other than 0.
Fixes 17858a169508609ca9063c544833e5a1adeb7b52Signed-off-by Igor Mammedov <[email protected]>Reported-by Laurent Vivier <[email protected]>
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 11 lines · Igor Mammedov
For full description see 2/2.
Tested hotplug on Q35 (see 2/2 for reproducer) and PC (with pci-bridge) machinesIgor Mammedov (2):
acpi: x86: pcihp: cleanup devfn usage in
build_append_pci_bus_devices()
acpi: x86: pcihp: add support hotplug on multifunction bridgeshw/i386/acpi-build.c | 42 +++++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 13 deletions(-)
In fact I think this fixes a bug in acpi hotplug on pc too.
have some questions though, posted.
Thanks!
Quoted 1 line
2.27.0