clk: x86: Rename clk-lpt to more specific clk-lpss-atom
Subsystems (3)
PATCH 1/1 clk: x86: Rename clk-lpt to more specific clk-lpss-atom
The LPT stands for Lynxpoint PCH. However the driver is used on a few Intel Atom SoCs. Rename it to reflect this in a way how another clock driver, i.e. clk-pmc-atom, is called.
---
Good to go either via ACPI or CCF tree.
drivers/acpi/acpi_lpss.c | 6 ++++--
drivers/clk/x86/Makefile | 2 +-
drivers/clk/x86/{clk-lpt.c => clk-lpss-atom.c} | 12 ++++++------
include/linux/platform_data/x86/clk-lpss.h | 2 +-
4 files changed, 12 insertions(+), 10 deletions(-)
rename drivers/clk/x86/{clk-lpt.c => clk-lpss-atom.c} (76%)drivers/acpi/acpi_lpss.c +4 -2
@@ -385,7 +385,9 @@ static struct platform_device *lpss_clk_dev;static inline void lpt_register_clock_device (void ) { - lpss_clk_dev =platform_device_register_simple ("clk-lpt" ,-1 ,NULL ,0 ); + lpss_clk_dev =platform_device_register_simple ("clk-lpss-atom" , +PLATFORM_DEVID_NONE , +NULL ,0 ); } static int register_device_clock(struct acpi_device *adev,
@@ -1337,7 +1339,7 @@ void __init acpi_lpss_init(void)const struct x86_cpu_id *id;int ret; - ret =lpt_clk_init (); + ret =lpss_atom_clk_init ();if (ret)return ;
drivers/clk/x86/Makefile +1 -1
@@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o obj-$(CONFIG_X86_AMD_PLATFORM_DEVICE) += clk-fch.o -clk-x86-lpss-objs := clk-lpt.o +clk-x86-lpss-y := clk-lpss-atom.o obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o obj-$(CONFIG_CLK_LGM_CGU) += clk-cgu.o clk-cgu-pll.o clk-lgm.o
drivers/clk/x86/clk-lpss-atom.c renamed from drivers/clk/x86/clk-lpt.c +6 -6
@@ -13,7 +13,7 @@#include <linux/platform_data/x86/clk-lpss.h> #include <linux/platform_device.h> -static int lpt_clk_probe (struct platform_device *pdev) +static int lpss_atom_clk_probe (struct platform_device *pdev) {struct lpss_clk_data *drvdata;struct clk *clk;
@@ -34,14 +34,14 @@ static int lpt_clk_probe(struct platform_device *pdev)return 0 ; } -static struct platform_driver lpt_clk_driver = { +static struct platform_driver lpss_atom_clk_driver = { .driver = { - .name ="clk-lpt" , + .name ="clk-lpss-atom" , }, - .probe = lpt_clk_probe, + .probe = lpss_atom_clk_probe, }; -int __init lpt_clk_init (void ) +int __init lpss_atom_clk_init (void ) { -return platform_driver_register (&lpt_clk_driver); +return platform_driver_register (&lpss_atom_clk_driver); }
include/linux/platform_data/x86/clk-lpss.h +1 -1
@@ -15,6 +15,6 @@ struct lpss_clk_data { struct clk *clk; }; -extern int lpt_clk_init (void ); +extern int lpss_atom_clk_init (void );#endif /* __CLK_LPSS_H */
Signature · 1 line
2.30.2
Quoted 9 lines · Andy Shevchenko
The LPT stands for Lynxpoint PCH. However the driver is used on a few Intel Atom SoCs. Rename it to reflect this in a way how another clock driver, i.e. clk-pmc-atom, is called.
Signed-off-by Andy Shevchenko <[email protected]>---
Good to go either via ACPI or CCF tree.
In case you want the latter:
Quoted 94 lines
drivers/acpi/acpi_lpss.c | 6 ++++-- drivers/clk/x86/Makefile | 2 +- drivers/clk/x86/{clk-lpt.c => clk-lpss-atom.c} | 12 ++++++------ include/linux/platform_data/x86/clk-lpss.h | 2 +- 4 files changed, 12 insertions(+), 10 deletions(-) rename drivers/clk/x86/{clk-lpt.c => clk-lpss-atom.c} (76%)drivers/acpi/acpi_lpss.c +4
-2@@ -385,7 +385,9 @@ static struct platform_device *lpss_clk_dev;static inline void lpt_register_clock_device (void ) { - lpss_clk_dev =platform_device_register_simple ("clk-lpt" ,-1 ,NULL ,0 ); + lpss_clk_dev =platform_device_register_simple ("clk-lpss-atom" , +PLATFORM_DEVID_NONE , +NULL ,0 ); } static int register_device_clock(struct acpi_device *adev,@@ -1337,7 +1339,7 @@ void __init acpi_lpss_init(void)const struct x86_cpu_id *id;int ret; - ret =lpt_clk_init (); + ret =lpss_atom_clk_init ();if (ret)return ;drivers/clk/x86/Makefile +1
-1@@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o obj-$(CONFIG_X86_AMD_PLATFORM_DEVICE) += clk-fch.o -clk-x86-lpss-objs := clk-lpt.o +clk-x86-lpss-y := clk-lpss-atom.o obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o obj-$(CONFIG_CLK_LGM_CGU) += clk-cgu.o clk-cgu-pll.o clk-lgm.odrivers/clk/x86/clk-lpss-atom.c renamed from drivers/clk/x86/clk-lpt.c +6
-6@@ -13,7 +13,7 @@#include <linux/platform_data/x86/clk-lpss.h> #include <linux/platform_device.h> -static int lpt_clk_probe (struct platform_device *pdev) +static int lpss_atom_clk_probe (struct platform_device *pdev) {struct lpss_clk_data *drvdata;struct clk *clk;@@ -34,14 +34,14 @@ static int lpt_clk_probe(struct platform_device *pdev)return 0 ; } -static struct platform_driver lpt_clk_driver = { +static struct platform_driver lpss_atom_clk_driver = { .driver = { - .name ="clk-lpt" , + .name ="clk-lpss-atom" , }, - .probe = lpt_clk_probe, + .probe = lpss_atom_clk_probe, }; -int __init lpt_clk_init (void ) +int __init lpss_atom_clk_init (void ) { -return platform_driver_register (&lpt_clk_driver); +return platform_driver_register (&lpss_atom_clk_driver); }include/linux/platform_data/x86/clk-lpss.h +1
-2@@ -15,6 +15,6 @@ struct lpss_clk_data { struct clk *clk; }; -extern int lpt_clk_init (void ); +extern int lpss_atom_clk_init (void );#endif /* __CLK_LPSS_H */ --2.30.2
Rafael J. Wysocki
maintainerQuoted 8 lines · Rafael J. Wysocki
Quoted 5 lines · Andy Shevchenko
The LPT stands for Lynxpoint PCH. However the driver is used on a few Intel Atom SoCs. Rename it to reflect this in a way how another clock driver, i.e. clk-pmc-atom, is called.
Quoted 8 lines
Quoted 4 lines
Signed-off-by Andy Shevchenko <[email protected]>---
Good to go either via ACPI or CCF tree.
In case you want the latter:
Assuming that this hasn't been picked up, I'm going to apply it as 5.15 material.
Thanks!
Quoted 94 lines
Quoted 94 lines
drivers/acpi/acpi_lpss.c | 6 ++++-- drivers/clk/x86/Makefile | 2 +- drivers/clk/x86/{clk-lpt.c => clk-lpss-atom.c} | 12 ++++++------ include/linux/platform_data/x86/clk-lpss.h | 2 +- 4 files changed, 12 insertions(+), 10 deletions(-) rename drivers/clk/x86/{clk-lpt.c => clk-lpss-atom.c} (76%)drivers/acpi/acpi_lpss.c +4
-2@@ -385,7 +385,9 @@ static struct platform_device *lpss_clk_dev;static inline void lpt_register_clock_device (void ) { - lpss_clk_dev =platform_device_register_simple ("clk-lpt" ,-1 ,NULL ,0 ); + lpss_clk_dev =platform_device_register_simple ("clk-lpss-atom" , +PLATFORM_DEVID_NONE , +NULL ,0 ); } static int register_device_clock(struct acpi_device *adev,@@ -1337,7 +1339,7 @@ void __init acpi_lpss_init(void)const struct x86_cpu_id *id;int ret; - ret =lpt_clk_init (); + ret =lpss_atom_clk_init ();if (ret)return ;drivers/clk/x86/Makefile +1
-1@@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o obj-$(CONFIG_X86_AMD_PLATFORM_DEVICE) += clk-fch.o -clk-x86-lpss-objs := clk-lpt.o +clk-x86-lpss-y := clk-lpss-atom.o obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o obj-$(CONFIG_CLK_LGM_CGU) += clk-cgu.o clk-cgu-pll.o clk-lgm.odrivers/clk/x86/clk-lpss-atom.c renamed from drivers/clk/x86/clk-lpt.c +6
-6@@ -13,7 +13,7 @@#include <linux/platform_data/x86/clk-lpss.h> #include <linux/platform_device.h> -static int lpt_clk_probe (struct platform_device *pdev) +static int lpss_atom_clk_probe (struct platform_device *pdev) {struct lpss_clk_data *drvdata;struct clk *clk;@@ -34,14 +34,14 @@ static int lpt_clk_probe(struct platform_device *pdev)return 0 ; } -static struct platform_driver lpt_clk_driver = { +static struct platform_driver lpss_atom_clk_driver = { .driver = { - .name ="clk-lpt" , + .name ="clk-lpss-atom" , }, - .probe = lpt_clk_probe, + .probe = lpss_atom_clk_probe, }; -int __init lpt_clk_init (void ) +int __init lpss_atom_clk_init (void ) { -return platform_driver_register (&lpt_clk_driver); +return platform_driver_register (&lpss_atom_clk_driver); }include/linux/platform_data/x86/clk-lpss.h +1
-2@@ -15,6 +15,6 @@ struct lpss_clk_data { struct clk *clk; }; -extern int lpt_clk_init (void ); +extern int lpss_atom_clk_init (void );#endif /* __CLK_LPSS_H */ --2.30.2
A message that is not in the archive (sent off-list or not yet received): 162809409848.19113.15878488082512415331@swboyd.mtv.corp.google.com
Rafael J. Wysocki
maintainerQuoted 18 lines · Stephen Boyd
Quoting Rafael J. Wysocki (2021-08-04 09:03:31)
Quoted 16 lines · Rafael J. Wysocki
Quoted 15 lines
Quoted 9 lines · Andy Shevchenko
The LPT stands for Lynxpoint PCH. However the driver is used on a few Intel Atom SoCs. Rename it to reflect this in a way how another clock driver, i.e. clk-pmc-atom, is called.
Signed-off-by Andy Shevchenko <[email protected]>---
Good to go either via ACPI or CCF tree.
In case you want the latter:
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Assuming that this hasn't been picked up, I'm going to apply it as 5.15 material.
I applied it already to clk tree. Maybe I forgot to send the email, sorry.
No prob, dropping it now.