lpfc: Update lpfc to revision 14.0.0.0
Subsystems (2)
cover lpfc: Update lpfc to revision 14.0.0.0
Update lpfc to revision 14.0.0.0
This patch set adds support for the new G7+ ASIC found on the LPe37xxx and LPe38xxx adapter models.
The set:
- Adds support for the new PCI ID's
- Corrects a bug found due to higher resource counts
- Rather than patching in new PCI ID's to capability checks, refactor to pick up the ASIC Family values which automatically picks up the new chip.
- Add in 256 Link support, which can now be seen on trunk links
The patches were cut against Martin's 5.15/scsi-staging tree
James Smart (6):
lpfc: Add pci id support for LPe37000/LPe38000 series adapters
lpfc: Fix cq_id truncation in rq create
lpfc: Revise Topology and RAS support checks for new adapters
lpfc: Add 256Gb link speed support
lpfc: Update lpfc version to 14.0.0.0
lpfc: Copyright updates for 14.0.0.0 patches
drivers/scsi/lpfc/lpfc_attr.c | 17 +++++++++---- drivers/scsi/lpfc/lpfc_ct.c | 5 ++++ drivers/scsi/lpfc/lpfc_els.c | 8 ++++++ drivers/scsi/lpfc/lpfc_hbadisc.c | 1 + drivers/scsi/lpfc/lpfc_hw.h | 3 ++- drivers/scsi/lpfc/lpfc_hw4.h | 6 ++++- drivers/scsi/lpfc/lpfc_ids.h | 4 ++- drivers/scsi/lpfc/lpfc_init.c | 42 +++++++++++++++++++++----------- drivers/scsi/lpfc/lpfc_mbox.c | 5 ++-- drivers/scsi/lpfc/lpfc_scsi.c | 8 ++---- drivers/scsi/lpfc/lpfc_scsi.h | 6 ++++- drivers/scsi/lpfc/lpfc_version.h | 2 +- 12 files changed, 75 insertions(+), 32 deletions(-)
Signature · 1 line
2.26.2
PATCH 1/6 lpfc: Add pci id support for LPe37000/LPe38000 series adapters
Update supported pci_device_id table to include the values for the G7+ Asic Device ID utilized by LPe37xxx and LPe38xxx series of adapters. The default reporting string will be "LPe38000".
--- drivers/scsi/lpfc/lpfc_hw.h | 1 + drivers/scsi/lpfc/lpfc_ids.h | 2 ++ drivers/scsi/lpfc/lpfc_init.c | 3 +++ 3 files changed, 6 insertions(+)
drivers/scsi/lpfc/lpfc_hw.h +1 -0
@@ -1694,6 +1694,7 @@ struct lpfc_fdmi_reg_portattr {#define PCI_DEVICE_ID_LANCER_FCOE_VF 0xe268#define PCI_DEVICE_ID_LANCER_G6_FC 0xe300#define PCI_DEVICE_ID_LANCER_G7_FC 0xf400 +#define PCI_DEVICE_ID_LANCER_G7P_FC 0xf500#define PCI_DEVICE_ID_SAT_SMB 0xf011#define PCI_DEVICE_ID_SAT_MID 0xf015#define PCI_DEVICE_ID_RFLY 0xf095
drivers/scsi/lpfc/lpfc_ids.h +2 -0
@@ -118,6 +118,8 @@ const struct pci_device_id lpfc_id_table[] = { PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_G7_FC, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_G7P_FC, + PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SKYHAWK, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SKYHAWK_VF,
drivers/scsi/lpfc/lpfc_init.c +3 -0
@@ -2599,6 +2599,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)case PCI_DEVICE_ID_LANCER_G7_FC : m = (typeof (m )){"LPe36000" ,"PCIe" ,"Fibre Channel Adapter" };break ; +case PCI_DEVICE_ID_LANCER_G7P_FC : + m = (typeof (m )){"LPe38000" ,"PCIe" ,"Fibre Channel Adapter" }; +break ;case PCI_DEVICE_ID_SKYHAWK :case PCI_DEVICE_ID_SKYHAWK_VF : oneConnect =1 ;
Signature · 1 line
2.26.2
PATCH 2/6 lpfc: Fix cq_id truncation in rq create
In reply to James SmartOn the newer hw, CQ_ID values can be larger than seen on previous hardware. This exposed an issue in the driver where its definition of cq_id in the RQ Create mailbox cmd was too small, thus the cq_id was truncated, causing the command to fail.
Revise the RQ_CREATE CQ_ID field to it's proper size (16bits).
--- drivers/scsi/lpfc/lpfc_hw4.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/lpfc/lpfc_hw4.h +1 -1
@@ -1561,7 +1561,7 @@ struct rq_context {#define lpfc_rq_context_hdr_size_WORD word1uint32_t word2;#define lpfc_rq_context_cq_id_SHIFT 16 -#define lpfc_rq_context_cq_id_MASK 0x000003FF +#define lpfc_rq_context_cq_id_MASK 0x0000FFFF#define lpfc_rq_context_cq_id_WORD word2#define lpfc_rq_context_buf_size_SHIFT 0#define lpfc_rq_context_buf_size_MASK 0x0000FFFF
Signature · 1 line
2.26.2
PATCH 3/6 lpfc: Revise Topology and RAS support checks for new adapters
In reply to James SmartSupport for Topology and RAS logging capabilities were qualified by pcie device id checks necessitating additional driver changes for new device ids.
Reduce reliance on specific pcie device ids by substituting checks for sli family information. This automatically picks up support on the newest hardware.
--- drivers/scsi/lpfc/lpfc_attr.c | 14 +++++++++----- drivers/scsi/lpfc/lpfc_hw4.h | 4 ++++ drivers/scsi/lpfc/lpfc_init.c | 34 ++++++++++++++++++++-------------- drivers/scsi/lpfc/lpfc_mbox.c | 5 +++-- drivers/scsi/lpfc/lpfc_scsi.c | 8 ++------ 5 files changed, 38 insertions(+), 27 deletions(-)
drivers/scsi/lpfc/lpfc_attr.c +9 -5
@@ -4038,6 +4038,7 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr,const char *val_buf = buf;int err;uint32_t prev_val; +u8 sli_family, if_type;if (!strncmp (buf,"nolip " ,strlen ("nolip " ))) { nolip =1 ;
@@ -4061,13 +4062,16 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr,/* * The 'topology' is not a configurable parameter if : * - persistent topology enabled -* - G7/G6 with no private loop support +* - ASIC_GEN_NUM >= 0xC, with no private loop support */ - + sli_family =bf_get (lpfc_sli_intf_sli_family, + &phba->sli4_hba.sli_intf); + if_type =bf_get (lpfc_sli_intf_if_type, + &phba->sli4_hba.sli_intf);if ((phba->hba_flag &HBA_PERSISTENT_TOPO || - (!phba->sli4_hba.pc_sli4_params.pls && - (phba->pcidev->device ==PCI_DEVICE_ID_LANCER_G6_FC || - phba->pcidev->device ==PCI_DEVICE_ID_LANCER_G7_FC ))) && + (!phba->sli4_hba.pc_sli4_params.pls && + (sli_family ==LPFC_SLI_INTF_FAMILY_G6 || + if_type ==LPFC_SLI_INTF_IF_TYPE_6 ))) && val ==4 ) {lpfc_printf_vlog (vport,KERN_ERR ,LOG_INIT ,"3114 Loop mode not supported\n" );
drivers/scsi/lpfc/lpfc_hw4.h +4 -0
@@ -94,6 +94,9 @@ struct lpfc_sli_intf {#define LPFC_SLI_INTF_FAMILY_BE3 0x1#define LPFC_SLI_INTF_FAMILY_LNCR_A0 0xa#define LPFC_SLI_INTF_FAMILY_LNCR_B0 0xb +#define LPFC_SLI_INTF_FAMILY_G6 0xc +#define LPFC_SLI_INTF_FAMILY_G7 0xd +#define LPFC_SLI_INTF_FAMILY_G7P 0xe#define lpfc_sli_intf_slirev_SHIFT 4#define lpfc_sli_intf_slirev_MASK 0x0000000F#define lpfc_sli_intf_slirev_WORD word0
@@ -4719,6 +4722,7 @@ union lpfc_wqe128 {#define MAGIC_NUMBER_G6 0xFEAA0003#define MAGIC_NUMBER_G7 0xFEAA0005 +#define MAGIC_NUMBER_G7P 0xFEAA0020struct lpfc_grp_hdr {uint32_t size;
drivers/scsi/lpfc/lpfc_init.c +20 -14
@@ -8550,9 +8550,12 @@ lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config) }/* FW supports persistent topology - override module parameter value */ phba->hba_flag |=HBA_PERSISTENT_TOPO ; -switch (phba->pcidev->device) { -case PCI_DEVICE_ID_LANCER_G7_FC : -case PCI_DEVICE_ID_LANCER_G6_FC : + +/* if ASIC_GEN_NUM >= 0xC) */ +if ((bf_get (lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == +LPFC_SLI_INTF_IF_TYPE_6 ) || + (bf_get (lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) == +LPFC_SLI_INTF_FAMILY_G6 )) {if (!tf) { phba->cfg_topology = ((pt == LINK_FLAGS_LOOP) ? FLAGS_TOPOLOGY_MODE_LOOP
@@ -8560,8 +8563,7 @@ lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config) }else { phba->hba_flag &= ~HBA_PERSISTENT_TOPO ; } -break ; -default :/* G5 */ + }else {/* G5 */ if (tf) {/* If topology failover set - pt is '0' or '1' */ phba->cfg_topology = (pt ? FLAGS_TOPOLOGY_MODE_PT_LOOP :
@@ -8571,7 +8573,6 @@ lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config) ? FLAGS_TOPOLOGY_MODE_PT_PT : FLAGS_TOPOLOGY_MODE_LOOP); } -break ; }if (phba->hba_flag &HBA_PERSISTENT_TOPO ) { lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
@@ -12991,7 +12992,9 @@ lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset, const struct firmware *fw) {int rc; +u8 sli_family; + sli_family =bf_get (lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);/* Three cases: (1) FW was not supported on the detected adapter. * (2) FW update has been locked out administratively. * (3) Some other error during FW update.
@@ -12999,10 +13002,12 @@ lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,* for admin diagnosis. */ if (offset ==ADD_STATUS_FW_NOT_SUPPORTED || - (phba->pcidev->device ==PCI_DEVICE_ID_LANCER_G6_FC && + (sli_family ==LPFC_SLI_INTF_FAMILY_G6 && magic_number !=MAGIC_NUMBER_G6 ) || - (phba->pcidev->device ==PCI_DEVICE_ID_LANCER_G7_FC && - magic_number !=MAGIC_NUMBER_G7 )) { + (sli_family ==LPFC_SLI_INTF_FAMILY_G7 && + magic_number !=MAGIC_NUMBER_G7 ) || + (sli_family ==LPFC_SLI_INTF_FAMILY_G7P && + magic_number !=MAGIC_NUMBER_G7P )) {lpfc_printf_log (phba,KERN_ERR ,LOG_TRACE_EVENT ,"3030 This firmware version is not supported on" " this HBA model. Device:%x Magic:%x Type:%x "
@@ -14053,17 +14058,18 @@ lpfc_sli4_oas_verify(struct lpfc_hba *phba)void lpfc_sli4_ras_init (struct lpfc_hba *phba) { -switch (phba->pcidev->device) { -case PCI_DEVICE_ID_LANCER_G6_FC : -case PCI_DEVICE_ID_LANCER_G7_FC : +/* if ASIC_GEN_NUM >= 0xC) */ +if ((bf_get (lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == +LPFC_SLI_INTF_IF_TYPE_6 ) || + (bf_get (lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) == +LPFC_SLI_INTF_FAMILY_G6 )) { phba->ras_fwlog.ras_hwsupport = true;if (phba->cfg_ras_fwlog_func ==PCI_FUNC (phba->pcidev->devfn) && phba->cfg_ras_fwlog_buffsize) phba->ras_fwlog.ras_enabled = true;else phba->ras_fwlog.ras_enabled = false; -break ; -default : + }else { phba->ras_fwlog.ras_hwsupport = false; } }
drivers/scsi/lpfc/lpfc_mbox.c +3 -2
@@ -513,8 +513,9 @@ lpfc_init_link(struct lpfc_hba * phba,break ; } -if ((phba->pcidev->device ==PCI_DEVICE_ID_LANCER_G6_FC || - phba->pcidev->device ==PCI_DEVICE_ID_LANCER_G7_FC ) && +/* Topology handling for ASIC_GEN_NUM 0xC and later */ +if ((phba->sli4_hba.pc_sli4_params.sli_family ==LPFC_SLI_INTF_FAMILY_G6 || + phba->sli4_hba.pc_sli4_params.if_type ==LPFC_SLI_INTF_IF_TYPE_6 ) && !(phba->sli4_hba.pc_sli4_params.pls) && mb->un.varInitLnk.link_flags &FLAGS_TOPOLOGY_MODE_LOOP ) { mb->un.varInitLnk.link_flags =FLAGS_TOPOLOGY_MODE_PT_PT ;
drivers/scsi/lpfc/lpfc_scsi.c +2 -6
@@ -5029,12 +5029,8 @@ lpfc_check_pci_resettable(struct lpfc_hba *phba) }/* Check for valid Emulex Device ID */ -switch (ptr->device) { -case PCI_DEVICE_ID_LANCER_FC : -case PCI_DEVICE_ID_LANCER_G6_FC : -case PCI_DEVICE_ID_LANCER_G7_FC : -break ; -default : +if (phba->sli_rev !=LPFC_SLI_REV4 || + phba->hba_flag &HBA_FCOE_MODE ) {lpfc_printf_log (phba,KERN_INFO ,LOG_INIT ,"8347 Incapable PCI reset device: " "0x%04x\n" , ptr->device);
Signature · 1 line
2.26.2
PATCH 4/6 lpfc: Add 256Gb link speed support
In reply to James SmartUpdate routines to support 256Gb link speed for LPe37000/LPe38000 adapters. 256Gb speeds can be seen on trunk links.
--- drivers/scsi/lpfc/lpfc_attr.c | 3 +++ drivers/scsi/lpfc/lpfc_ct.c | 5 +++++ drivers/scsi/lpfc/lpfc_els.c | 8 ++++++++ drivers/scsi/lpfc/lpfc_hbadisc.c | 1 + drivers/scsi/lpfc/lpfc_init.c | 5 +++++ drivers/scsi/lpfc/lpfc_scsi.h | 4 ++++ 6 files changed, 26 insertions(+)
drivers/scsi/lpfc/lpfc_attr.c +3 -0
@@ -6745,6 +6745,9 @@ lpfc_get_host_speed(struct Scsi_Host *shost)case LPFC_LINK_SPEED_128GHZ :fc_host_speed (shost) =FC_PORTSPEED_128GBIT ;break ; +case LPFC_LINK_SPEED_256GHZ : +fc_host_speed (shost) =FC_PORTSPEED_256GBIT ; +break ;default :fc_host_speed (shost) =FC_PORTSPEED_UNKNOWN ;break ;
drivers/scsi/lpfc/lpfc_ct.c +5 -0
@@ -2846,6 +2846,8 @@ lpfc_fdmi_port_attr_support_speed(struct lpfc_vport *vport, ae->un.AttrInt =0 ;if (!(phba->hba_flag &HBA_FCOE_MODE )) { +if (phba->lmt & LMT_256Gb) + ae->un.AttrInt |=HBA_PORTSPEED_256GFC ;if (phba->lmt & LMT_128Gb) ae->un.AttrInt |=HBA_PORTSPEED_128GFC ;if (phba->lmt & LMT_64Gb)
@@ -2927,6 +2929,9 @@ lpfc_fdmi_port_attr_speed(struct lpfc_vport *vport,case LPFC_LINK_SPEED_128GHZ : ae->un.AttrInt =HBA_PORTSPEED_128GFC ;break ; +case LPFC_LINK_SPEED_256GHZ : + ae->un.AttrInt =HBA_PORTSPEED_256GFC ; +break ;default : ae->un.AttrInt =HBA_PORTSPEED_UNKNOWN ;break ;
drivers/scsi/lpfc/lpfc_els.c +8 -0
@@ -6105,6 +6105,12 @@ lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba)case LPFC_LINK_SPEED_64GHZ : rdp_speed =RDP_PS_64GB ;break ; +case LPFC_LINK_SPEED_128GHZ : + rdp_speed =RDP_PS_128GB ; +break ; +case LPFC_LINK_SPEED_256GHZ : + rdp_speed =RDP_PS_256GB ; +break ;default : rdp_speed =RDP_PS_UNKNOWN ;break ;
@@ -6112,6 +6118,8 @@ lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba) desc->info.port_speed.speed =cpu_to_be16 (rdp_speed); +if (phba->lmt & LMT_256Gb) + rdp_cap |=RDP_PS_256GB ;if (phba->lmt & LMT_128Gb) rdp_cap |=RDP_PS_128GB ;if (phba->lmt & LMT_64Gb)
drivers/scsi/lpfc/lpfc_hbadisc.c +1 -0
@@ -3331,6 +3331,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)case LPFC_LINK_SPEED_32GHZ :case LPFC_LINK_SPEED_64GHZ :case LPFC_LINK_SPEED_128GHZ : +case LPFC_LINK_SPEED_256GHZ :break ;default : phba->fc_linkspeed =LPFC_LINK_SPEED_UNKNOWN ;
drivers/scsi/lpfc/lpfc_init.c +5 -0
@@ -4679,6 +4679,8 @@ static void lpfc_host_supported_speeds_set(struct Scsi_Host *shost)if (phba->hba_flag &HBA_FCOE_MODE )return ; +if (phba->lmt & LMT_256Gb) +fc_host_supported_speeds (shost) |=FC_PORTSPEED_256GBIT ;if (phba->lmt & LMT_128Gb)fc_host_supported_speeds (shost) |=FC_PORTSPEED_128GBIT ;if (phba->lmt & LMT_64Gb)
@@ -5087,6 +5089,9 @@ lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,case LPFC_FC_LA_SPEED_128G : port_speed =128000 ;break ; +case LPFC_FC_LA_SPEED_256G : + port_speed =256000 ; +break ;default : port_speed =0 ; }
drivers/scsi/lpfc/lpfc_scsi.h +4 -0
@@ -142,6 +142,10 @@ struct lpfc_scsicmd_bkt {#define FC_PORTSPEED_128GBIT 0x2000#endif +#ifndef FC_PORTSPEED_256GBIT +#define FC_PORTSPEED_256GBIT 0x4000 +#endif +#define TXRDY_PAYLOAD_LEN 12/* For sysfs/debugfs tmp string max len */
Signature · 1 line
2.26.2
PATCH 5/6 lpfc: Update lpfc version to 14.0.0.0
In reply to James SmartUpdate lpfc version to 14.0.0.0
--- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/lpfc/lpfc_version.h +1 -1
@@ -20,7 +20,7 @@* included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "12.8.0.11" +#define LPFC_DRIVER_VERSION "14.0.0.0"#define LPFC_DRIVER_NAME "lpfc"/* Used for SLI 2/3 */
Signature · 1 line
2.26.2
PATCH 6/6 lpfc: Copyright updates for 14.0.0.0 patches
In reply to James SmartUpdate copyrights to 2021 for files modified in the 14.0.0.0 patch set.
--- drivers/scsi/lpfc/lpfc_hw.h | 2 +- drivers/scsi/lpfc/lpfc_ids.h | 2 +- drivers/scsi/lpfc/lpfc_scsi.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
drivers/scsi/lpfc/lpfc_hw.h +1 -1
@@ -1,7 +1,7 @@/******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * -* Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term * +* Copyright (C) 2017-2021 Broadcom. All Rights Reserved. The term * * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * * Copyright (C) 2004-2016 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. *
drivers/scsi/lpfc/lpfc_ids.h +1 -1
@@ -1,7 +1,7 @@/******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * -* Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term * +* Copyright (C) 2017-2021 Broadcom. All Rights Reserved. The term * * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * * Copyright (C) 2004-2016 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. *
drivers/scsi/lpfc/lpfc_scsi.h +1 -1
@@ -1,7 +1,7 @@/******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * -* Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term * +* Copyright (C) 2017-2021 Broadcom. All Rights Reserved. The term * * “Broadcom” refers to Broadcom Inc and/or its subsidiaries. * * Copyright (C) 2004-2016 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. *
Signature · 1 line
2.26.2
Martin K. Petersen
AppliedJames,
Quoted 1 line
Update lpfc to revision 14.0.0.0
Applied to 5.15/scsi-staging, thanks!
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering
Quoted 7 lines · Martin K. Petersen
James,
Quoted 1 line
Update lpfc to revision 14.0.0.0
Applied to 5.15/scsi-staging, thanks!
Hey Martin,
Thanks for keeping us rolling.. :)
-- james
Martin K. Petersen
AppliedQuoted 13 lines · James Smart
Update lpfc to revision 14.0.0.0
This patch set adds support for the new G7+ ASIC found on the LPe37xxx and LPe38xxx adapter models.
The set:
- Adds support for the new PCI ID's
- Corrects a bug found due to higher resource counts
- Rather than patching in new PCI ID's to capability checks, refactor to pick up the ASIC Family values which automatically picks up the new chip.
- Add in 256 Link support, which can now be seen on trunk links
Quoted 1 line
[...]
Applied to 5.15/scsi-queue, thanks!
[1/6] lpfc: Add pci id support for LPe37000/LPe38000 series adapters
https://git.kernel.org/mkp/scsi/c/f449a3d7a153 [2/6] lpfc: Fix cq_id truncation in rq create https://git.kernel.org/mkp/scsi/c/df3d78c3eb4e [3/6] lpfc: Revise Topology and RAS support checks for new adapters https://git.kernel.org/mkp/scsi/c/f6c5e6c4561d [4/6] lpfc: Add 256Gb link speed support https://git.kernel.org/mkp/scsi/c/bfc477854a42 [5/6] lpfc: Update lpfc version to 14.0.0.0 https://git.kernel.org/mkp/scsi/c/95518cabe119 [6/6] lpfc: Copyright updates for 14.0.0.0 patches https://git.kernel.org/mkp/scsi/c/45e524d61ec4
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering