Begin enabling Xe_HP SDV and DG2 platforms
v3 cover Begin enabling Xe_HP SDV and DG2 platforms
This series provides some of the initial enablement patches for two upcoming discrete GPUs:
* XeHP SDV: Xe_HP (version 12.50) graphics IP, no display IP
* DG2: Xe_HPG (version 12.55) graphics IP, Xe_LPD (version 13) display IP
Both platforms will need additional enablement patches beyond what's present in this series before they're truly usable, including various LMEM and GuC work that's already happening separately. The new features/functionality that these platforms bring (such as multi-tile support, dedicated compute engines, etc.) may be referenced in passing in some of these patches but will be fully enabled in future series.
v2:
- General rebase and incorporation of r-b's.
- Re-order intel_gt_info and intel_device_info structures to eliminate some unnecessary padding after the size change of intel_engine_mask_t. (Tvrtko)
- Use 'intel_step' mechanisms for revid->stepping mapping. (Jani)
- Drop the DSC patches for now; they need some rework. (Jani)
v3:
- About 20 of the patches have landed upstream now. Rebase and resend the rest. Some of these are already reviewed, but have dependencies on other unreviewed patches (e.g., the new engine definitions, the initial SNPS PHY support, etc.).
Akeem G Abodunrin (1):
drm/i915/dg2: Add new LRI reg offsets
Animesh Manna (1):
drm/i915/dg2: Update to bigjoiner path
Ankit Nautiyal (1):
drm/i915/dg2: Configure PCON in DP pre-enable path
Daniele Ceraolo Spurio (1):
drm/i915/xehp: handle new steering options
Gwan-gyeong Mun (1):
drm/i915/dg2: Update lane disable power state during PSR
John Harrison (3):
drm/i915/xehp: Extra media engines - Part 1 (engine definitions) drm/i915/xehp: Extra media engines - Part 2 (interrupts) drm/i915/xehp: Extra media engines - Part 3 (reset)
Lucas De Marchi (2):
drm/i915/xehpsdv: Define MOCS table for XeHP SDV drm/i915/xehpsdv: factor out function to read RP_STATE_CAP
Matt Roper (18):
drm/i915/xehpsdv: Correct parameters for IS_XEHPSDV_GT_STEP() drm/i915/xehp: Xe_HP forcewake support
drm/i915/xehp: Loop over all gslices for INSTDONE processing drm/i915/xehpsdv: Add maximum sseu limits drm/i915/xehpsdv: Define steering tables drm/i915/xehpsdv: Read correct RP_STATE_CAP register drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV drm/i915/dg2: Add forcewake table
drm/i915/dg2: Update LNCF steering ranges drm/i915/dg2: Add SQIDI steering
drm/i915/dg2: Maintain backward-compatible nested batch behavior drm/i915/dg2: Report INSTDONE_GEOM values in error state drm/i915/dg2: Define MOCS table for DG2
drm/i915/dg2: Add MPLLB programming for SNPS PHY drm/i915/dg2: Add MPLLB programming for HDMI drm/i915/dg2: Add vswing programming for SNPS phys drm/i915/dg2: Update modeset sequences
drm/i915/dg2: Wait for SNPS PHY calibration during display init
Matthew Auld (1):
drm/i915/xehp: Changes to ss/eu definitions
Stuart Summers (1):
drm/i915/xehpsdv: Add compute DSS type
drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/display/intel_ddi.c | 161 +++- drivers/gpu/drm/i915/display/intel_display.c | 51 ++ .../drm/i915/display/intel_display_power.c | 5 + .../drm/i915/display/intel_display_types.h | 17 +- drivers/gpu/drm/i915/display/intel_dpll.c | 12 +- drivers/gpu/drm/i915/display/intel_hdmi.c | 11 + drivers/gpu/drm/i915/display/intel_psr.c | 7 + drivers/gpu/drm/i915/display/intel_snps_phy.c | 862 ++++++++++++++++++ drivers/gpu/drm/i915/display/intel_snps_phy.h | 35 + drivers/gpu/drm/i915/gt/debugfs_gt_pm.c | 8 +- drivers/gpu/drm/i915/gt/gen8_engine_cs.c | 7 +- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 99 +- drivers/gpu/drm/i915/gt/intel_engine_types.h | 29 +- .../drm/i915/gt/intel_execlists_submission.c | 4 + drivers/gpu/drm/i915/gt/intel_gt.c | 66 +- drivers/gpu/drm/i915/gt/intel_gt.h | 1 + drivers/gpu/drm/i915/gt/intel_gt_irq.c | 13 +- drivers/gpu/drm/i915/gt/intel_gt_types.h | 12 +- drivers/gpu/drm/i915/gt/intel_lrc.c | 85 +- drivers/gpu/drm/i915/gt/intel_mocs.c | 66 +- drivers/gpu/drm/i915/gt/intel_region_lmem.c | 1 + drivers/gpu/drm/i915/gt/intel_reset.c | 6 + drivers/gpu/drm/i915/gt/intel_rps.c | 19 +- drivers/gpu/drm/i915/gt/intel_rps.h | 1 + drivers/gpu/drm/i915/gt/intel_sseu.c | 116 ++- drivers/gpu/drm/i915/gt/intel_sseu.h | 20 +- drivers/gpu/drm/i915/gt/intel_sseu_debugfs.c | 2 +- drivers/gpu/drm/i915/gt/intel_workarounds.c | 155 +++- drivers/gpu/drm/i915/i915_debugfs.c | 8 +- drivers/gpu/drm/i915/i915_drv.h | 7 +- drivers/gpu/drm/i915/i915_getparam.c | 6 +- drivers/gpu/drm/i915/i915_gpu_error.c | 36 +- drivers/gpu/drm/i915/i915_pci.c | 6 +- drivers/gpu/drm/i915/i915_reg.h | 100 +- drivers/gpu/drm/i915/intel_device_info.h | 4 +- drivers/gpu/drm/i915/intel_uncore.c | 367 ++++++-- drivers/gpu/drm/i915/intel_uncore.h | 14 +- drivers/gpu/drm/i915/selftests/intel_uncore.c | 2 + include/uapi/drm/i915_drm.h | 3 - 40 files changed, 2251 insertions(+), 174 deletions(-) create mode 100644 drivers/gpu/drm/i915/display/intel_snps_phy.c create mode 100644 drivers/gpu/drm/i915/display/intel_snps_phy.h
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 1/30 drm/i915/xehpsdv: Correct parameters for IS_XEHPSDV_GT_STEP()
During a rebase the parameters were partially renamed, but not completely. Since the subsequent patches that start using this macro haven't landed on an upstream tree yet this didn't cause a build failure.
--- drivers/gpu/drm/i915/i915_drv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +2 -2
@@ -1562,8 +1562,8 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915, (IS_ALDERLAKE_P (__i915) && \ IS_GT_STEP(__i915, since, until)) -#define IS_XEHPSDV_GT_STEP (p, since, until) \ - (IS_XEHPSDV(p) && IS_GT_STEP(__i915, since, until)) +#define IS_XEHPSDV_GT_STEP (__i915, since, until) \ + (IS_XEHPSDV(__i915) && IS_GT_STEP(__i915, since, until))/* * DG2 hardware steppings are a bit unusual. The hardware design was forked
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v3 01/30] drm/i915/xehpsdv: Correct parameters for IS_XEHPSDV_GT_STEP()
Quoted 18 lines · Matt Roper
During a rebase the parameters were partially renamed, but not completely. Since the subsequent patches that start using this macro haven't landed on an upstream tree yet this didn't cause a build failure.
Fixes 086df54e20be ("drm/i915/xehpsdv: add initial XeHP SDVdefinitions")
Signed-off-by Matt Roper <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/i915_drv.h +0
-0
drivers/gpu/drm/i915/i915_drv.h IS_SUBPLATFORM(const struct drm_i915_private · line 1567
Quoted 8 lines
drivers/gpu/drm/i915/i915_drv.h +2
-2@@ -1562,8 +1562,8 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915, (IS_ALDERLAKE_P (__i915) && \ IS_GT_STEP(__i915, since, until)) -#define IS_XEHPSDV_GT_STEP (p, since, until) \ - (IS_XEHPSDV(p) && IS_GT_STEP(__i915, since, until)) +#define IS_XEHPSDV_GT_STEP (__i915, since, until) \ + (IS_XEHPSDV(__i915) && IS_GT_STEP(__i915, since, until))
Is your comment saying that the first parameter
of IS_XEHPSDV_GT_STEP(), p or __i915 must be the first parameter of both IS_XEHPSDV() and IS_GT_STEP()? The older code is a bug, correct? -caz
Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.h +0
-0/* * DG2 hardware steppings are a bit unusual. The hardware design was forked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v3 01/30] drm/i915/xehpsdv: Correct parameters for IS_XEHPSDV_GT_STEP()
Quoted 23 lines · Caz
Quoted 22 lines · Matt Roper
During a rebase the parameters were partially renamed, but not completely. Since the subsequent patches that start using this macro haven't landed on an upstream tree yet this didn't cause a build failure.
Fixes 086df54e20be ("drm/i915/xehpsdv: add initial XeHP SDVdefinitions")
Signed-off-by Matt Roper <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/i915_drv.h +0
-0@@ -1562,8 +1562,8 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915, (IS_ALDERLAKE_P (__i915) && \IS_GT_STEP (__i915, since, until))
Quoted 8 lines
drivers/gpu/drm/i915/i915_drv.h IS_SUBPLATFORM(const struct drm_i915_private *i915, · line 1566
Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.h +2
-2-#define IS_XEHPSDV_GT_STEP (p, since, until) \ - (IS_XEHPSDV(p) && IS_GT_STEP(__i915, since, until)) +#define IS_XEHPSDV_GT_STEP (__i915, since, until) \ + (IS_XEHPSDV(__i915) && IS_GT_STEP(__i915, since, until))Is your comment saying that the first parameter
ofIS_XEHPSDV_GT_STEP(), p or__i915must be the first parameter of bothIS_XEHPSDV()andIS_GT_STEP()? The older code is a bug, correct? -caz
We can name the parameter anything we want, it just has to be used consistently throughout the macro. Defining the parameter as 'p' but then passing a different undefined name '__i915' into IS_GT_STEP won't work (but it will only start causing compile errors when we land workarounds and such that start using the macro).
Matt
Quoted 5 lines
Quoted 5 lines
drivers/gpu/drm/i915/i915_drv.h +0
-0/* * DG2 hardware steppings are a bit unusual. The hardware design was forked
Signature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Yokoyama, Caz
Reviewed-byRe: [Intel-gfx] [PATCH v3 01/30] drm/i915/xehpsdv: Correct parameters for IS_XEHPSDV_GT_STEP()
Quoted 36 lines · Matt Roper
Quoted 25 lines · Caz
Quoted 24 lines · Matt Roper
During a rebase the parameters were partially renamed, but not completely. Since the subsequent patches that start using this macro
haven't landed on an upstream tree yet this didn't cause a build failure.Fixes 086df54e20be ("drm/i915/xehpsdv: add initial XeHP SDVdefinitions")
Signed-off-by Matt Roper <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/i915_drv.h +0
-0@@ -1562,8 +1562,8 @@ IS_SUBPLATFORM(const struct
drm_i915_private
*i915,(IS_ALDERLAKE_P(__i915) && \ IS_GT_STEP(__i915, since, until))Quoted 9 lines
drivers/gpu/drm/i915/i915_drv.h IS_SUBPLATFORM(const struct drm_i915_private *i915, · line 1566
Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.h +2
-2-#define IS_XEHPSDV_GT_STEP (p, since, until) \ - (IS_XEHPSDV(p) && IS_GT_STEP(__i915, since, until)) +#define IS_XEHPSDV_GT_STEP (__i915, since, until) \ + (IS_XEHPSDV(__i915) && IS_GT_STEP(__i915, since, until))Is your comment saying that the first parameter
ofIS_XEHPSDV_GT_STEP(), p or__i915must be the first parameter of bothIS_XEHPSDV()andIS_GT_STEP()? The older code is a bug, correct?
-caz
Quoted 6 lines
We can name the parameter anything we want, it just has to be used consistently throughout the macro. Defining the parameter as 'p' but then passing a different undefined name '
__i915' intoIS_GT_STEPwon't
work (but it will only start causing compile errors when we land workarounds and such that start using the macro).
-caz
Quoted 8 lines
Matt
Quoted 4 lines
Quoted 4 lines
/*
* DG2 hardware steppings are a bit unusual. The hardware
design
was forked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 2/30 drm/i915/xehp: Extra media engines - Part 1 (engine definitions)
In reply to Matt RoperFrom: John Harrison <[email protected]>
Xe_HP can have a lot of extra media engines. This patch adds the basic definitions for them.
v2:
- Re-order intel_gt_info and intel_device_info slightly to avoid unnecessary padding now that we've increased the size of intel_engine_mask_t. (Tvrtko)
v3:
- Drop the .hw_id assignments. (Lucas)
--- drivers/gpu/drm/i915/gt/gen8_engine_cs.c | 7 ++-- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 44 ++++++++++++++++++++ drivers/gpu/drm/i915/gt/intel_engine_types.h | 14 +++++-- drivers/gpu/drm/i915/gt/intel_gt_types.h | 5 ++- drivers/gpu/drm/i915/i915_pci.c | 5 ++- drivers/gpu/drm/i915/i915_reg.h | 6 +++ drivers/gpu/drm/i915/intel_device_info.h | 3 +- 7 files changed, 71 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/gt/gen8_engine_cs.c +3 -4
@@ -279,7 +279,7 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)if (mode &EMIT_INVALIDATE ) aux_inv = rq->engine->mask & ~BIT (BCS0 );if (aux_inv) - cmd +=2 *hweight8 (aux_inv) +2 ; + cmd +=2 *hweight32 (aux_inv) +2 ; cs =intel_ring_begin (rq, cmd);if (IS_ERR (cs))
@@ -313,9 +313,8 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)struct intel_engine_cs *engine;unsigned int tmp; - *cs++ =MI_LOAD_REGISTER_IMM (hweight8 (aux_inv)); -for_each_engine_masked (engine, rq->engine->gt, - aux_inv, tmp) { + *cs++ =MI_LOAD_REGISTER_IMM (hweight32 (aux_inv)); +for_each_engine_masked (engine, rq->engine->gt, aux_inv, tmp) { *cs++ =i915_mmio_reg_offset (aux_inv_reg (engine)); *cs++ =AUX_INV ; }
drivers/gpu/drm/i915/gt/intel_engine_cs.c +44 -0
62 lines not on this page · raw message
drivers/gpu/drm/i915/gt/intel_engine_types.h +10 -4
@@ -42,7 +42,7 @@#define COPY_ENGINE_CLASS 3#define OTHER_CLASS 4#define MAX_ENGINE_CLASS 4 -#define MAX_ENGINE_INSTANCE 3 +#define MAX_ENGINE_INSTANCE 7#define I915_MAX_SLICES 3#define I915_MAX_SUBSLICES 8
@@ -60,7 +60,7 @@ struct intel_gt;struct intel_ring ;struct intel_uncore ; -typedef u8 intel_engine_mask_t ; +typedef u32 intel_engine_mask_t ;#define ALL_ENGINES ((intel_engine_mask_t)~0ul)struct intel_hw_status_page {
@@ -97,8 +97,8 @@ struct i915_ctx_workarounds {struct i915_vma *vma; }; -#define I915_MAX_VCS 4 -#define I915_MAX_VECS 2 +#define I915_MAX_VCS 8 +#define I915_MAX_VECS 4/* * Engine IDs definitions.
@@ -111,9 +111,15 @@ enum intel_engine_id {VCS1 ,VCS2 ,VCS3 , +VCS4 , +VCS5 , +VCS6 , +VCS7 , #define _VCS(n) (VCS0 + (n))VECS0 ,VECS1 , +VECS2 , +VECS3 , #define _VECS(n) (VECS0 + (n)) I915_NUM_ENGINES #define INVALID_ENGINE ((enum intel_engine_id)-1)
drivers/gpu/drm/i915/gt/intel_gt_types.h +3 -2
@@ -174,13 +174,14 @@ struct intel_gt {struct intel_gt_info {intel_engine_mask_t engine_mask; + +u32 l3bank_mask; +u8 num_engines;/* Media engine access to SFC per instance */ u8 vdbox_sfc_access; -u32 l3bank_mask; -/* Slice/subslice/EU info */ struct sseu_dev_info sseu; } info;
drivers/gpu/drm/i915/i915_pci.c +3 -2
@@ -1033,8 +1033,9 @@ static const struct intel_device_info xehpsdv_info = { .pipe_mask = 0, .platform_engine_mask =BIT (RCS0 ) |BIT (BCS0 ) | -BIT (VECS0 ) |BIT (VECS1 ) | - BIT(VCS0) | BIT(VCS1) | BIT(VCS2) | BIT(VCS3), +BIT (VECS0 ) |BIT (VECS1 ) |BIT (VECS2 ) |BIT (VECS3 ) | +BIT (VCS0 ) |BIT (VCS1 ) |BIT (VCS2 ) |BIT (VCS3 ) | + BIT(VCS4) | BIT(VCS5) | BIT(VCS6) | BIT(VCS7), .require_force_probe = 1, };
drivers/gpu/drm/i915/i915_reg.h +6 -0
@@ -2516,9 +2516,15 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN11_BSD2_RING_BASE 0x1c4000#define GEN11_BSD3_RING_BASE 0x1d0000#define GEN11_BSD4_RING_BASE 0x1d4000 +#define XEHP_BSD5_RING_BASE 0x1e0000 +#define XEHP_BSD6_RING_BASE 0x1e4000 +#define XEHP_BSD7_RING_BASE 0x1f0000 +#define XEHP_BSD8_RING_BASE 0x1f4000#define VEBOX_RING_BASE 0x1a000#define GEN11_VEBOX_RING_BASE 0x1c8000#define GEN11_VEBOX2_RING_BASE 0x1d8000 +#define XEHP_VEBOX3_RING_BASE 0x1e8000 +#define XEHP_VEBOX4_RING_BASE 0x1f8000#define BLT_RING_BASE 0x22000#define RING_TAIL (base) _MMIO((base) + 0x30)#define RING_HEAD (base) _MMIO((base) + 0x34)
drivers/gpu/drm/i915/intel_device_info.h +2 -1
@@ -172,7 +172,6 @@ struct intel_device_info {u8 media_ver;u8 media_rel; -u8 gt;/* GT number, 0 if undefined */ intel_engine_mask_t platform_engine_mask;/* Engines supported by the HW */ enum intel_platform platform;
@@ -188,6 +187,8 @@ struct intel_device_info {u32 display_mmio_offset; +u8 gt;/* GT number, 0 if undefined */ +u8 pipe_mask;u8 cpu_transcoder_mask;
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v3 02/30] drm/i915/xehp: Extra media engines - Part 1 (engine definitions)
Quoted 57 lines · Matt Roper
From: John Harrison <[email protected]>
Xe_HPcan have a lot of extra media engines. This patch adds the basic definitions for them.v2:
- Re-orderintel_gt_infoandintel_device_infoslightly to avoid unnecessary padding now that we've increased the size ofintel_engine_mask_t. (Tvrtko)
v3:
- Drop the .hw_id assignments. (Lucas)Cc Tvrtko Ursulin <[email protected]>Cc Lucas De Marchi <[email protected]>Signed-off-by John Harrison <[email protected]>Signed-off-by Tomas Winkler <[email protected]>Signed-off-by Matt Roper <[email protected]>---
drivers/gpu/drm/i915/gt/gen8_engine_cs.c | 7 ++-- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 44 ++++++++++++++++++++ drivers/gpu/drm/i915/gt/intel_engine_types.h | 14 +++++-- drivers/gpu/drm/i915/gt/intel_gt_types.h | 5 ++- drivers/gpu/drm/i915/i915_pci.c | 5 ++- drivers/gpu/drm/i915/i915_reg.h | 6 +++ drivers/gpu/drm/i915/intel_device_info.h | 3 +- 7 files changed, 71 insertions(+), 13 deletions(-)drivers/gpu/drm/i915/gt/gen8_engine_cs.c +3
-4@@ -279,7 +279,7 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)if (mode &EMIT_INVALIDATE ) aux_inv = rq->engine->mask & ~BIT (BCS0 );if (aux_inv) - cmd +=2 *hweight8 (aux_inv) +2 ; + cmd +=2 *hweight32 (aux_inv) +2 ; cs =intel_ring_begin (rq, cmd);if (IS_ERR (cs))@@ -313,9 +313,8 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)struct intel_engine_cs *engine;unsigned int tmp; - *cs++ =MI_LOAD_REGISTER_IMM (hweight8 (aux_inv)); -for_each_engine_masked (engine, rq->engine->gt, - aux_inv, tmp) { + *cs++ =MI_LOAD_REGISTER_IMM (hweight32 (aux_inv)); +for_each_engine_masked (engine, rq->engine->gt, aux_inv, tmp) { *cs++ =i915_mmio_reg_offset (aux_inv_reg (engine)); *cs++ =AUX_INV ; }drivers/gpu/drm/i915/gt/intel_engine_cs.c +0
-0
drivers/gpu/drm/i915/gt/intel_engine_cs.c static const struct engine_info intel_engines[] = { · line 108
Quoted 8 lines
drivers/gpu/drm/i915/gt/intel_engine_cs.c +5
-0@@ -101,6 +101,34 @@ static const struct engine_info intel_engines[] = { { .graphics_ver = 11, .base = GEN11_BSD4_RING_BASE } }, }, + [VCS4] = { + .class = VIDEO_DECODE_CLASS, + .instance = 4, + .mmio_bases = { + { .graphics_ver = 11, .base = XEHP_BSD5_RING_BASE }
another thing I raised in my previous review was this ver == 11 here. Was this not changed on purpose ?
Lucas De Marchi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v3 02/30] drm/i915/xehp: Extra media engines - Part 1 (engine definitions)
Quoted 61 lines · Lucas De Marchi
Quoted 60 lines · Matt Roper
From: John Harrison <[email protected]>
Xe_HPcan have a lot of extra media engines. This patch adds the basic definitions for them.v2:
- Re-orderintel_gt_infoandintel_device_infoslightly to avoid unnecessary padding now that we've increased the size ofintel_engine_mask_t. (Tvrtko)
v3:
- Drop the .hw_id assignments. (Lucas)Cc Tvrtko Ursulin <[email protected]>Cc Lucas De Marchi <[email protected]>Signed-off-by John Harrison <[email protected]>Signed-off-by Tomas Winkler <[email protected]>Signed-off-by Matt Roper <[email protected]>---
drivers/gpu/drm/i915/gt/gen8_engine_cs.c | 7 ++-- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 44 ++++++++++++++++++++ drivers/gpu/drm/i915/gt/intel_engine_types.h | 14 +++++-- drivers/gpu/drm/i915/gt/intel_gt_types.h | 5 ++- drivers/gpu/drm/i915/i915_pci.c | 5 ++- drivers/gpu/drm/i915/i915_reg.h | 6 +++ drivers/gpu/drm/i915/intel_device_info.h | 3 +- 7 files changed, 71 insertions(+), 13 deletions(-)drivers/gpu/drm/i915/gt/gen8_engine_cs.c +3
-4@@ -279,7 +279,7 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)if (mode &EMIT_INVALIDATE ) aux_inv = rq->engine->mask & ~BIT (BCS0 );if (aux_inv) - cmd +=2 *hweight8 (aux_inv) +2 ; + cmd +=2 *hweight32 (aux_inv) +2 ; cs =intel_ring_begin (rq, cmd);if (IS_ERR (cs))@@ -313,9 +313,8 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)struct intel_engine_cs *engine;unsigned int tmp; - *cs++ =MI_LOAD_REGISTER_IMM (hweight8 (aux_inv)); -for_each_engine_masked (engine, rq->engine->gt, - aux_inv, tmp) { + *cs++ =MI_LOAD_REGISTER_IMM (hweight32 (aux_inv)); +for_each_engine_masked (engine, rq->engine->gt, aux_inv, tmp) { *cs++ =i915_mmio_reg_offset (aux_inv_reg (engine)); *cs++ =AUX_INV ; }drivers/gpu/drm/i915/gt/intel_engine_cs.c +0
-0@@ -101,6 +101,34 @@ static const struct engine_info intel_engines[] = { { .graphics_ver = 11, .base = GEN11_BSD4_RING_BASE } }, },
Quoted 8 lines
drivers/gpu/drm/i915/gt/intel_engine_cs.c static const struct engine_info intel_engines[] = { · line 108
Quoted 5 lines
drivers/gpu/drm/i915/gt/intel_engine_cs.c +5
-0+ [VCS4] = { + .class = VIDEO_DECODE_CLASS, + .instance = 4, + .mmio_bases = { + { .graphics_ver = 11, .base = XEHP_BSD5_RING_BASE }another thing I raised in my previous review was this ver == 11 here. Was this not changed on purpose ?
Woops, looks like I missed that comment in the mix of discussion about hw_id. I'll respin this one.
Matt
Quoted 2 lines
Lucas De Marchi
Signature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 2/2 drm/i915/xehp: Extra media engines - Part 1 (engine definitions)
In reply to Lucas De MarchiFrom: John Harrison <[email protected]>
Xe_HP can have a lot of extra media engines. This patch adds the basic definitions for them.
v2:
- Re-order intel_gt_info and intel_device_info slightly to avoid unnecessary padding now that we've increased the size of intel_engine_mask_t. (Tvrtko)
v3:
- Drop the .hw_id assignments. (Lucas)
v4:
- Fix graphics_ver typo for VCS4 (should be 12, not 11). (Lucas)
--- drivers/gpu/drm/i915/gt/gen8_engine_cs.c | 7 ++-- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 44 ++++++++++++++++++++ drivers/gpu/drm/i915/gt/intel_engine_types.h | 14 +++++-- drivers/gpu/drm/i915/gt/intel_gt_types.h | 5 ++- drivers/gpu/drm/i915/i915_pci.c | 5 ++- drivers/gpu/drm/i915/i915_reg.h | 6 +++ drivers/gpu/drm/i915/intel_device_info.h | 3 +- 7 files changed, 71 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/gt/gen8_engine_cs.c +3 -4
@@ -279,7 +279,7 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)if (mode &EMIT_INVALIDATE ) aux_inv = rq->engine->mask & ~BIT (BCS0 );if (aux_inv) - cmd +=2 *hweight8 (aux_inv) +2 ; + cmd +=2 *hweight32 (aux_inv) +2 ; cs =intel_ring_begin (rq, cmd);if (IS_ERR (cs))
@@ -313,9 +313,8 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)struct intel_engine_cs *engine;unsigned int tmp; - *cs++ =MI_LOAD_REGISTER_IMM (hweight8 (aux_inv)); -for_each_engine_masked (engine, rq->engine->gt, - aux_inv, tmp) { + *cs++ =MI_LOAD_REGISTER_IMM (hweight32 (aux_inv)); +for_each_engine_masked (engine, rq->engine->gt, aux_inv, tmp) { *cs++ =i915_mmio_reg_offset (aux_inv_reg (engine)); *cs++ =AUX_INV ; }
drivers/gpu/drm/i915/gt/intel_engine_cs.c +44 -0
62 lines not on this page · raw message
drivers/gpu/drm/i915/gt/intel_engine_types.h +10 -4
@@ -42,7 +42,7 @@#define COPY_ENGINE_CLASS 3#define OTHER_CLASS 4#define MAX_ENGINE_CLASS 4 -#define MAX_ENGINE_INSTANCE 3 +#define MAX_ENGINE_INSTANCE 7#define I915_MAX_SLICES 3#define I915_MAX_SUBSLICES 8
@@ -60,7 +60,7 @@ struct intel_gt;struct intel_ring ;struct intel_uncore ; -typedef u8 intel_engine_mask_t ; +typedef u32 intel_engine_mask_t ;#define ALL_ENGINES ((intel_engine_mask_t)~0ul)struct intel_hw_status_page {
@@ -97,8 +97,8 @@ struct i915_ctx_workarounds {struct i915_vma *vma; }; -#define I915_MAX_VCS 4 -#define I915_MAX_VECS 2 +#define I915_MAX_VCS 8 +#define I915_MAX_VECS 4/* * Engine IDs definitions.
@@ -111,9 +111,15 @@ enum intel_engine_id {VCS1 ,VCS2 ,VCS3 , +VCS4 , +VCS5 , +VCS6 , +VCS7 , #define _VCS(n) (VCS0 + (n))VECS0 ,VECS1 , +VECS2 , +VECS3 , #define _VECS(n) (VECS0 + (n)) I915_NUM_ENGINES #define INVALID_ENGINE ((enum intel_engine_id)-1)
drivers/gpu/drm/i915/gt/intel_gt_types.h +3 -2
@@ -174,13 +174,14 @@ struct intel_gt {struct intel_gt_info {intel_engine_mask_t engine_mask; + +u32 l3bank_mask; +u8 num_engines;/* Media engine access to SFC per instance */ u8 vdbox_sfc_access; -u32 l3bank_mask; -/* Slice/subslice/EU info */ struct sseu_dev_info sseu; } info;
drivers/gpu/drm/i915/i915_pci.c +3 -2
@@ -1033,8 +1033,9 @@ static const struct intel_device_info xehpsdv_info = { .pipe_mask = 0, .platform_engine_mask =BIT (RCS0 ) |BIT (BCS0 ) | -BIT (VECS0 ) |BIT (VECS1 ) | - BIT(VCS0) | BIT(VCS1) | BIT(VCS2) | BIT(VCS3), +BIT (VECS0 ) |BIT (VECS1 ) |BIT (VECS2 ) |BIT (VECS3 ) | +BIT (VCS0 ) |BIT (VCS1 ) |BIT (VCS2 ) |BIT (VCS3 ) | + BIT(VCS4) | BIT(VCS5) | BIT(VCS6) | BIT(VCS7), .require_force_probe = 1, };
drivers/gpu/drm/i915/i915_reg.h +6 -0
@@ -2516,9 +2516,15 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN11_BSD2_RING_BASE 0x1c4000#define GEN11_BSD3_RING_BASE 0x1d0000#define GEN11_BSD4_RING_BASE 0x1d4000 +#define XEHP_BSD5_RING_BASE 0x1e0000 +#define XEHP_BSD6_RING_BASE 0x1e4000 +#define XEHP_BSD7_RING_BASE 0x1f0000 +#define XEHP_BSD8_RING_BASE 0x1f4000#define VEBOX_RING_BASE 0x1a000#define GEN11_VEBOX_RING_BASE 0x1c8000#define GEN11_VEBOX2_RING_BASE 0x1d8000 +#define XEHP_VEBOX3_RING_BASE 0x1e8000 +#define XEHP_VEBOX4_RING_BASE 0x1f8000#define BLT_RING_BASE 0x22000#define RING_TAIL (base) _MMIO((base) + 0x30)#define RING_HEAD (base) _MMIO((base) + 0x34)
drivers/gpu/drm/i915/intel_device_info.h +2 -1
@@ -172,7 +172,6 @@ struct intel_device_info {u8 media_ver;u8 media_rel; -u8 gt;/* GT number, 0 if undefined */ intel_engine_mask_t platform_engine_mask;/* Engines supported by the HW */ enum intel_platform platform;
@@ -188,6 +187,8 @@ struct intel_device_info {u32 display_mmio_offset; +u8 gt;/* GT number, 0 if undefined */ +u8 pipe_mask;u8 cpu_transcoder_mask;
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v4 2/2] drm/i915/xehp: Extra media engines - Part 1 (engine definitions)
Quoted 14 lines · Matt Roper
From: John Harrison <[email protected]>
Xe_HPcan have a lot of extra media engines. This patch adds the basic definitions for them.v2:
- Re-orderintel_gt_infoandintel_device_infoslightly to avoid unnecessary padding now that we've increased the size ofintel_engine_mask_t. (Tvrtko)
v3:
- Drop the .hw_id assignments. (Lucas)
v4:
- Fixgraphics_vertypo for VCS4 (should be 12, not 11). (Lucas)
Quoted 5 lines
Cc Tvrtko Ursulin <[email protected]>Cc Lucas De Marchi <[email protected]>Signed-off-by John Harrison <[email protected]>Signed-off-by Tomas Winkler <[email protected]>Signed-off-by Matt Roper <[email protected]>
thanks
Lucas De Marchi
Quoted 234 lines
---
drivers/gpu/drm/i915/gt/gen8_engine_cs.c | 7 ++-- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 44 ++++++++++++++++++++ drivers/gpu/drm/i915/gt/intel_engine_types.h | 14 +++++-- drivers/gpu/drm/i915/gt/intel_gt_types.h | 5 ++- drivers/gpu/drm/i915/i915_pci.c | 5 ++- drivers/gpu/drm/i915/i915_reg.h | 6 +++ drivers/gpu/drm/i915/intel_device_info.h | 3 +- 7 files changed, 71 insertions(+), 13 deletions(-)drivers/gpu/drm/i915/gt/gen8_engine_cs.c +3
-4@@ -279,7 +279,7 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)if (mode &EMIT_INVALIDATE ) aux_inv = rq->engine->mask & ~BIT (BCS0 );if (aux_inv) - cmd +=2 *hweight8 (aux_inv) +2 ; + cmd +=2 *hweight32 (aux_inv) +2 ; cs =intel_ring_begin (rq, cmd);if (IS_ERR (cs))@@ -313,9 +313,8 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)struct intel_engine_cs *engine;unsigned int tmp; - *cs++ =MI_LOAD_REGISTER_IMM (hweight8 (aux_inv)); -for_each_engine_masked (engine, rq->engine->gt, - aux_inv, tmp) { + *cs++ =MI_LOAD_REGISTER_IMM (hweight32 (aux_inv)); +for_each_engine_masked (engine, rq->engine->gt, aux_inv, tmp) { *cs++ =i915_mmio_reg_offset (aux_inv_reg (engine)); *cs++ =AUX_INV ; }drivers/gpu/drm/i915/gt/intel_engine_cs.c +44
-0@@ -101,6 +101,34 @@ static const struct engine_info intel_engines[] = { { .graphics_ver = 11, .base = GEN11_BSD4_RING_BASE } }, }, + [VCS4] = { + .class = VIDEO_DECODE_CLASS, + .instance = 4, + .mmio_bases = { + { .graphics_ver = 12, .base = XEHP_BSD5_RING_BASE } + }, + }, + [VCS5] = { + .class = VIDEO_DECODE_CLASS, + .instance = 5, + .mmio_bases = { + { .graphics_ver = 12, .base = XEHP_BSD6_RING_BASE } + }, + }, + [VCS6] = { + .class = VIDEO_DECODE_CLASS, + .instance = 6, + .mmio_bases = { + { .graphics_ver = 12, .base = XEHP_BSD7_RING_BASE } + }, + }, + [VCS7] = { + .class = VIDEO_DECODE_CLASS, + .instance = 7, + .mmio_bases = { + { .graphics_ver = 12, .base = XEHP_BSD8_RING_BASE } + }, + }, [VECS0] = { .gen6_hw_id = VECS0_HW, .class = VIDEO_ENHANCEMENT_CLASS,@@ -117,6 +145,20 @@ static const struct engine_info intel_engines[] = { { .graphics_ver = 11, .base = GEN11_VEBOX2_RING_BASE } }, }, + [VECS2 ] = { + .class =VIDEO_ENHANCEMENT_CLASS , + .instance =2 , + .mmio_bases = { + { .graphics_ver =12 , .base =XEHP_VEBOX3_RING_BASE } + }, + }, + [VECS3 ] = { + .class =VIDEO_ENHANCEMENT_CLASS , + .instance =3 , + .mmio_bases = { + { .graphics_ver =12 , .base =XEHP_VEBOX4_RING_BASE } + }, + }, };/** @@ -265,6 +307,8 @@ static int intel_engine_setup(struct intel_gt *gt, enum intel_engine_id id)BUILD_BUG_ON (MAX_ENGINE_CLASS >=BIT (GEN11_ENGINE_CLASS_WIDTH ));BUILD_BUG_ON (MAX_ENGINE_INSTANCE >=BIT (GEN11_ENGINE_INSTANCE_WIDTH )); +BUILD_BUG_ON (I915_MAX_VCS > (MAX_ENGINE_INSTANCE +1 )); +BUILD_BUG_ON (I915_MAX_VECS > (MAX_ENGINE_INSTANCE +1 ));if (GEM_DEBUG_WARN_ON (id >=ARRAY_SIZE (gt->engine)))return -EINVAL ;drivers/gpu/drm/i915/gt/intel_engine_types.h +10
-4@@ -42,7 +42,7 @@#define COPY_ENGINE_CLASS 3#define OTHER_CLASS 4#define MAX_ENGINE_CLASS 4 -#define MAX_ENGINE_INSTANCE 3 +#define MAX_ENGINE_INSTANCE 7#define I915_MAX_SLICES 3#define I915_MAX_SUBSLICES 8@@ -60,7 +60,7 @@ struct intel_gt;struct intel_ring ;struct intel_uncore ; -typedef u8 intel_engine_mask_t ; +typedef u32 intel_engine_mask_t ;#define ALL_ENGINES ((intel_engine_mask_t)~0ul)struct intel_hw_status_page {@@ -97,8 +97,8 @@ struct i915_ctx_workarounds {struct i915_vma *vma; }; -#define I915_MAX_VCS 4 -#define I915_MAX_VECS 2 +#define I915_MAX_VCS 8 +#define I915_MAX_VECS 4/* * Engine IDs definitions. @@ -111,9 +111,15 @@ enum intel_engine_id {VCS1 ,VCS2 ,VCS3 , +VCS4 , +VCS5 , +VCS6 , +VCS7 , #define _VCS(n) (VCS0 + (n))VECS0 ,VECS1 , +VECS2 , +VECS3 , #define _VECS(n) (VECS0 + (n)) I915_NUM_ENGINES #define INVALID_ENGINE ((enum intel_engine_id)-1)drivers/gpu/drm/i915/gt/intel_gt_types.h +3
-2@@ -174,13 +174,14 @@ struct intel_gt {struct intel_gt_info {intel_engine_mask_t engine_mask; + +u32 l3bank_mask; +u8 num_engines;/* Media engine access to SFC per instance */ u8 vdbox_sfc_access; -u32 l3bank_mask; -/* Slice/subslice/EU info */ struct sseu_dev_info sseu; } info;drivers/gpu/drm/i915/i915_pci.c +3
-2@@ -1033,8 +1033,9 @@ static const struct intel_device_info xehpsdv_info = { .pipe_mask = 0, .platform_engine_mask =BIT (RCS0 ) |BIT (BCS0 ) | -BIT (VECS0 ) |BIT (VECS1 ) | - BIT(VCS0) | BIT(VCS1) | BIT(VCS2) | BIT(VCS3), +BIT (VECS0 ) |BIT (VECS1 ) |BIT (VECS2 ) |BIT (VECS3 ) | +BIT (VCS0 ) |BIT (VCS1 ) |BIT (VCS2 ) |BIT (VCS3 ) | + BIT(VCS4) | BIT(VCS5) | BIT(VCS6) | BIT(VCS7), .require_force_probe = 1, };drivers/gpu/drm/i915/i915_reg.h +6
-0@@ -2516,9 +2516,15 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN11_BSD2_RING_BASE 0x1c4000#define GEN11_BSD3_RING_BASE 0x1d0000#define GEN11_BSD4_RING_BASE 0x1d4000 +#define XEHP_BSD5_RING_BASE 0x1e0000 +#define XEHP_BSD6_RING_BASE 0x1e4000 +#define XEHP_BSD7_RING_BASE 0x1f0000 +#define XEHP_BSD8_RING_BASE 0x1f4000#define VEBOX_RING_BASE 0x1a000#define GEN11_VEBOX_RING_BASE 0x1c8000#define GEN11_VEBOX2_RING_BASE 0x1d8000 +#define XEHP_VEBOX3_RING_BASE 0x1e8000 +#define XEHP_VEBOX4_RING_BASE 0x1f8000#define BLT_RING_BASE 0x22000#define RING_TAIL (base) _MMIO((base) + 0x30)#define RING_HEAD (base) _MMIO((base) + 0x34)drivers/gpu/drm/i915/intel_device_info.h +2
-1@@ -172,7 +172,6 @@ struct intel_device_info {u8 media_ver;u8 media_rel; -u8 gt;/* GT number, 0 if undefined */ intel_engine_mask_t platform_engine_mask;/* Engines supported by the HW */ enum intel_platform platform;@@ -188,6 +187,8 @@ struct intel_device_info {u32 display_mmio_offset; +u8 gt;/* GT number, 0 if undefined */ +u8 pipe_mask;u8 cpu_transcoder_mask;Signature · 1 line
2.25.4
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 3/30 drm/i915/xehp: Extra media engines - Part 2 (interrupts)
In reply to Matt RoperFrom: John Harrison <[email protected]>
Xe_HP can have a lot of extra media engines. This patch adds the interrupt handler support for them.
--- drivers/gpu/drm/i915/gt/intel_gt_irq.c | 13 ++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 3 +++ 2 files changed, 15 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_gt_irq.c +12 -1
@@ -184,7 +184,13 @@ void gen11_gt_irq_reset(struct intel_gt *gt)intel_uncore_write (uncore,GEN11_BCS_RSVD_INTR_MASK , ~0 );intel_uncore_write (uncore,GEN11_VCS0_VCS1_INTR_MASK , ~0 );intel_uncore_write (uncore,GEN11_VCS2_VCS3_INTR_MASK , ~0 ); +if (HAS_ENGINE (gt,VCS4 ) ||HAS_ENGINE (gt,VCS5 )) +intel_uncore_write (uncore,GEN12_VCS4_VCS5_INTR_MASK , ~0 ); +if (HAS_ENGINE (gt,VCS6 ) ||HAS_ENGINE (gt,VCS7 )) +intel_uncore_write (uncore,GEN12_VCS6_VCS7_INTR_MASK , ~0 );intel_uncore_write (uncore,GEN11_VECS0_VECS1_INTR_MASK , ~0 ); +if (HAS_ENGINE (gt,VECS2 ) ||HAS_ENGINE (gt,VECS3 )) +intel_uncore_write (uncore,GEN12_VECS2_VECS3_INTR_MASK , ~0 );intel_uncore_write (uncore,GEN11_GPM_WGBOXPERF_INTR_ENABLE ,0 );intel_uncore_write (uncore,GEN11_GPM_WGBOXPERF_INTR_MASK , ~0 );
@@ -218,8 +224,13 @@ void gen11_gt_irq_postinstall(struct intel_gt *gt)intel_uncore_write (uncore,GEN11_BCS_RSVD_INTR_MASK , ~smask);intel_uncore_write (uncore,GEN11_VCS0_VCS1_INTR_MASK , ~dmask);intel_uncore_write (uncore,GEN11_VCS2_VCS3_INTR_MASK , ~dmask); +if (HAS_ENGINE (gt,VCS4 ) ||HAS_ENGINE (gt,VCS5 )) +intel_uncore_write (uncore,GEN12_VCS4_VCS5_INTR_MASK , ~dmask); +if (HAS_ENGINE (gt,VCS6 ) ||HAS_ENGINE (gt,VCS7 )) +intel_uncore_write (uncore,GEN12_VCS6_VCS7_INTR_MASK , ~dmask);intel_uncore_write (uncore,GEN11_VECS0_VECS1_INTR_MASK , ~dmask); - +if (HAS_ENGINE (gt,VECS2 ) ||HAS_ENGINE (gt,VECS3 )) +intel_uncore_write (uncore,GEN12_VECS2_VECS3_INTR_MASK , ~dmask);/* * RPS interrupts will get enabled/disabled on demand when RPS itself * is enabled/disabled.
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -8088,7 +8088,10 @@ enum {#define GEN11_BCS_RSVD_INTR_MASK _MMIO(0x1900a0)#define GEN11_VCS0_VCS1_INTR_MASK _MMIO(0x1900a8)#define GEN11_VCS2_VCS3_INTR_MASK _MMIO(0x1900ac) +#define GEN12_VCS4_VCS5_INTR_MASK _MMIO(0x1900b0) +#define GEN12_VCS6_VCS7_INTR_MASK _MMIO(0x1900b4)#define GEN11_VECS0_VECS1_INTR_MASK _MMIO(0x1900d0) +#define GEN12_VECS2_VECS3_INTR_MASK _MMIO(0x1900d4)#define GEN11_GUC_SG_INTR_MASK _MMIO(0x1900e8)#define GEN11_GPM_WGBOXPERF_INTR_MASK _MMIO(0x1900ec)#define GEN11_CRYPTO_RSVD_INTR_MASK _MMIO(0x1900f0)
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 4/30 drm/i915/xehp: Extra media engines - Part 3 (reset)
In reply to Matt RoperFrom: John Harrison <[email protected]>
Xe_HP can have a lot of extra media engines. This patch adds the reset support for them.
--- drivers/gpu/drm/i915/gt/intel_reset.c | 6 ++++++ drivers/gpu/drm/i915/i915_reg.h | 8 ++++++++ 2 files changed, 14 insertions(+)
drivers/gpu/drm/i915/gt/intel_reset.c +6 -0
@@ -515,8 +515,14 @@ static int gen11_reset_engines(struct intel_gt *gt, [VCS1] = GEN11_GRDOM_MEDIA2, [VCS2] = GEN11_GRDOM_MEDIA3, [VCS3] = GEN11_GRDOM_MEDIA4, + [VCS4] = GEN11_GRDOM_MEDIA5, + [VCS5] = GEN11_GRDOM_MEDIA6, + [VCS6] = GEN11_GRDOM_MEDIA7, + [VCS7] = GEN11_GRDOM_MEDIA8, [VECS0] = GEN11_GRDOM_VECS, [VECS1] = GEN11_GRDOM_VECS2, + [VECS2] = GEN11_GRDOM_VECS3, + [VECS3] = GEN11_GRDOM_VECS4, };struct intel_engine_cs *engine;intel_engine_mask_t tmp;
drivers/gpu/drm/i915/i915_reg.h +8 -0
@@ -395,10 +395,18 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN11_GRDOM_MEDIA2 (1 << 6)#define GEN11_GRDOM_MEDIA3 (1 << 7)#define GEN11_GRDOM_MEDIA4 (1 << 8) +#define GEN11_GRDOM_MEDIA5 (1 << 9) +#define GEN11_GRDOM_MEDIA6 (1 << 10) +#define GEN11_GRDOM_MEDIA7 (1 << 11) +#define GEN11_GRDOM_MEDIA8 (1 << 12)#define GEN11_GRDOM_VECS (1 << 13)#define GEN11_GRDOM_VECS2 (1 << 14) +#define GEN11_GRDOM_VECS3 (1 << 15) +#define GEN11_GRDOM_VECS4 (1 << 16)#define GEN11_GRDOM_SFC0 (1 << 17)#define GEN11_GRDOM_SFC1 (1 << 18) +#define GEN11_GRDOM_SFC2 (1 << 19) +#define GEN11_GRDOM_SFC3 (1 << 20)#define GEN11_VCS_SFC_RESET_BIT (instance) (GEN11_GRDOM_SFC0 << ((instance) >> 1))#define GEN11_VECS_SFC_RESET_BIT (instance) (GEN11_GRDOM_SFC0 << (instance))
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 5/30 drm/i915/xehp: Xe_HP forcewake support
In reply to Matt RoperImplement Xe_HP forcewake handling. While we're at it, let's reorder to the forcewake assignment if/else ladder to match our usual driver conventions.
--- .../drm/i915/gt/intel_execlists_submission.c | 4 + drivers/gpu/drm/i915/intel_uncore.c | 336 +++++++++++++++--- drivers/gpu/drm/i915/intel_uncore.h | 14 +- drivers/gpu/drm/i915/selftests/intel_uncore.c | 2 + 4 files changed, 302 insertions(+), 54 deletions(-)
drivers/gpu/drm/i915/gt/intel_execlists_submission.c +4 -0
@@ -3357,6 +3357,10 @@ int intel_execlists_submission_setup(struct intel_engine_cs *engine)i915_mmio_reg_offset (RING_EXECLIST_SQ_CONTENTS (base)); execlists->ctrl_reg = uncore->regs +i915_mmio_reg_offset (RING_EXECLIST_CONTROL (base)); + + engine->fw_domain =intel_uncore_forcewake_for_reg (engine->uncore, +RING_EXECLIST_CONTROL (engine->mmio_base), +FW_REG_WRITE ); }else { execlists->submit_reg = uncore->regs +i915_mmio_reg_offset (RING_ELSP (base));
drivers/gpu/drm/i915/intel_uncore.c +283 -53
412 lines not on this page · raw message
drivers/gpu/drm/i915/intel_uncore.h +13 -1
@@ -52,8 +52,14 @@ enum forcewake_domain_id {FW_DOMAIN_ID_MEDIA_VDBOX1 ,FW_DOMAIN_ID_MEDIA_VDBOX2 ,FW_DOMAIN_ID_MEDIA_VDBOX3 , +FW_DOMAIN_ID_MEDIA_VDBOX4 , +FW_DOMAIN_ID_MEDIA_VDBOX5 , +FW_DOMAIN_ID_MEDIA_VDBOX6 , +FW_DOMAIN_ID_MEDIA_VDBOX7 ,FW_DOMAIN_ID_MEDIA_VEBOX0 ,FW_DOMAIN_ID_MEDIA_VEBOX1 , +FW_DOMAIN_ID_MEDIA_VEBOX2 , +FW_DOMAIN_ID_MEDIA_VEBOX3 ,FW_DOMAIN_ID_COUNT };
@@ -66,10 +72,16 @@ enum forcewake_domains {FORCEWAKE_MEDIA_VDBOX1 =BIT (FW_DOMAIN_ID_MEDIA_VDBOX1 ),FORCEWAKE_MEDIA_VDBOX2 =BIT (FW_DOMAIN_ID_MEDIA_VDBOX2 ),FORCEWAKE_MEDIA_VDBOX3 =BIT (FW_DOMAIN_ID_MEDIA_VDBOX3 ), +FORCEWAKE_MEDIA_VDBOX4 =BIT (FW_DOMAIN_ID_MEDIA_VDBOX4 ), +FORCEWAKE_MEDIA_VDBOX5 =BIT (FW_DOMAIN_ID_MEDIA_VDBOX5 ), +FORCEWAKE_MEDIA_VDBOX6 =BIT (FW_DOMAIN_ID_MEDIA_VDBOX6 ), +FORCEWAKE_MEDIA_VDBOX7 =BIT (FW_DOMAIN_ID_MEDIA_VDBOX7 ),FORCEWAKE_MEDIA_VEBOX0 =BIT (FW_DOMAIN_ID_MEDIA_VEBOX0 ),FORCEWAKE_MEDIA_VEBOX1 =BIT (FW_DOMAIN_ID_MEDIA_VEBOX1 ), +FORCEWAKE_MEDIA_VEBOX2 =BIT (FW_DOMAIN_ID_MEDIA_VEBOX2 ), +FORCEWAKE_MEDIA_VEBOX3 =BIT (FW_DOMAIN_ID_MEDIA_VEBOX3 ), -FORCEWAKE_ALL =BIT (FW_DOMAIN_ID_COUNT ) -1 + FORCEWAKE_ALL = BIT(FW_DOMAIN_ID_COUNT) - 1, }; struct intel_uncore_funcs {
drivers/gpu/drm/i915/selftests/intel_uncore.c +2 -0
@@ -68,6 +68,7 @@ static int intel_shadow_table_check(void) { gen8_shadowed_regs, ARRAY_SIZE(gen8_shadowed_regs) }, { gen11_shadowed_regs, ARRAY_SIZE(gen11_shadowed_regs) }, { gen12_shadowed_regs, ARRAY_SIZE(gen12_shadowed_regs) }, + { xehp_shadowed_regs, ARRAY_SIZE(xehp_shadowed_regs) }, };const i915_reg_t *reg;unsigned int i, j;
@@ -103,6 +104,7 @@ int intel_uncore_mock_selftests(void) { __gen9_fw_ranges, ARRAY_SIZE(__gen9_fw_ranges), true }, { __gen11_fw_ranges, ARRAY_SIZE(__gen11_fw_ranges), true }, { __gen12_fw_ranges, ARRAY_SIZE(__gen12_fw_ranges), true }, + { __xehp_fw_ranges, ARRAY_SIZE(__xehp_fw_ranges), true }, };int err, i;
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 6/30 drm/i915/xehp: handle new steering options
In reply to Matt RoperFrom: Daniele Ceraolo Spurio <[email protected]>
Xe_HP is more modular then its predecessors and as a consequence it has more types of replicated registers. As with l3bank regions on previous platforms, we may need to explicitly re-steer accesses to these new types of ranges at runtime if we can't find a single default steering value that satisfies the fusing of all types.
Bspec: 66534
--- drivers/gpu/drm/i915/gt/intel_gt.c | 40 ++++++++- drivers/gpu/drm/i915/gt/intel_gt.h | 1 + drivers/gpu/drm/i915/gt/intel_gt_types.h | 7 ++ drivers/gpu/drm/i915/gt/intel_region_lmem.c | 1 + drivers/gpu/drm/i915/gt/intel_sseu.c | 18 +++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 6 ++ drivers/gpu/drm/i915/gt/intel_workarounds.c | 89 +++++++++++++++++++-- drivers/gpu/drm/i915/i915_drv.h | 3 + drivers/gpu/drm/i915/i915_pci.c | 1 + drivers/gpu/drm/i915/i915_reg.h | 4 + drivers/gpu/drm/i915/intel_device_info.h | 1 + 11 files changed, 165 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/gt/intel_gt.c +39 -1
@@ -89,6 +89,13 @@ static const struct intel_mmio_range icl_l3bank_steering_table[] = { {}, }; +static u16 slicemask (struct intel_gt *gt,int count) +{ +u64 dss_mask =intel_sseu_get_subslices (>->info.sseu,0 ); + +return intel_slicemask_from_dssmask (dss_mask, count); +} +int intel_gt_init_mmio (struct intel_gt *gt) {intel_gt_init_clock_frequency (gt);
@@ -96,11 +103,24 @@ int intel_gt_init_mmio(struct intel_gt *gt)intel_uc_init_mmio (>->uc);intel_sseu_info_init (gt); -if (GRAPHICS_VER (gt->i915) >=11 ) { +/* +* An mslice is unavailable only if both the meml3 for the slice is +* disabled *and* all of the DSS in the slice (quadrant) are disabled. +*/ +if (HAS_MSLICES (gt->i915)) + gt->info.mslice_mask = +slicemask (gt,GEN_DSS_PER_MSLICE ) | + (intel_uncore_read (gt->uncore,GEN10_MIRROR_FUSE3 ) & +GEN12_MEML3_EN_MASK ); + +if (GRAPHICS_VER (gt->i915) >=11 && +GRAPHICS_VER_FULL (gt->i915) <IP_VER (12 ,50 )) { gt->steering_table[L3BANK ] = icl_l3bank_steering_table; gt->info.l3bank_mask = ~intel_uncore_read (gt->uncore,GEN10_MIRROR_FUSE3 ) &GEN10_L3BANK_MASK ; + }else if (HAS_MSLICES (gt->i915)) { +MISSING_CASE (INTEL_INFO (gt->i915)->platform); }return intel_engines_init_mmio (gt);
@@ -785,6 +805,24 @@ static void intel_gt_get_valid_steering(struct intel_gt *gt, *sliceid =0 ;/* unused */ *subsliceid =__ffs (gt->info.l3bank_mask);break ; +case MSLICE : +GEM_DEBUG_WARN_ON (!gt->info.mslice_mask);/* should be impossible! */ + + *sliceid =__ffs (gt->info.mslice_mask); + *subsliceid =0 ;/* unused */ +break ; +case LNCF : +GEM_DEBUG_WARN_ON (!gt->info.mslice_mask);/* should be impossible! */ + +/* +* 0xFDC[29:28] selects the mslice to steer to and 0xFDC[27] +* selects which LNCF within the mslice to steer to. An LNCF +* is always present if its mslice is present, so we can safely +* just steer to LNCF 0 in all cases. +*/ + *sliceid =__ffs (gt->info.mslice_mask) <<1 ; + *subsliceid =0 ;/* unused */ +break ;default :MISSING_CASE (type); *sliceid =0 ;
drivers/gpu/drm/i915/gt/intel_gt.h +1 -0
@@ -84,6 +84,7 @@ static inline bool intel_gt_needs_read_steering(struct intel_gt *gt, }u32 intel_gt_read_register_fw (struct intel_gt *gt,i915_reg_t reg); +u32 intel_gt_read_register (struct intel_gt *gt,i915_reg_t reg);void intel_gt_info_print (const struct intel_gt_info *info,struct drm_printer *p);
drivers/gpu/drm/i915/gt/intel_gt_types.h +7 -0
@@ -47,9 +47,14 @@ struct intel_mmio_range {* of multicast registers. If another type of steering does not have any * overlap in valid steering targets with 'subslice' style registers, we will * need to explicitly re-steer reads of registers of the other type. +* +* Only the replication types that may need additional non-default steering +* are listed here. */ enum intel_steering_type {L3BANK , +MSLICE , +LNCF ,NUM_STEERING_TYPES };
@@ -184,6 +189,8 @@ struct intel_gt {/* Slice/subslice/EU info */ struct sseu_dev_info sseu; + +unsigned long mslice_mask; } info; };
drivers/gpu/drm/i915/gt/intel_region_lmem.c +1 -0
@@ -10,6 +10,7 @@#include "gem/i915_gem_lmem.h" #include "gem/i915_gem_region.h" #include "gem/i915_gem_ttm.h" +#include "gt/intel_gt.h" static int init_fake_lmem_bar (struct intel_memory_region *mem) {
drivers/gpu/drm/i915/gt/intel_sseu.c +18 -0
@@ -759,3 +759,21 @@ void intel_sseu_print_topology(const struct sseu_dev_info *sseu, } } } + +u16 intel_slicemask_from_dssmask (u64 dss_mask,int dss_per_slice) +{ +u16 slice_mask =0 ; +int i; + +WARN_ON (sizeof (dss_mask) *8 / dss_per_slice >8 *sizeof (slice_mask)); + +for (i =0 ; dss_mask; i++) { +if (dss_mask &GENMASK (dss_per_slice -1 ,0 )) + slice_mask |=BIT (i); + + dss_mask >>= dss_per_slice; + } + +return slice_mask; +} +
drivers/gpu/drm/i915/gt/intel_sseu.h +6 -0
@@ -22,6 +22,10 @@ struct drm_printer;#define GEN_MAX_EUS (16)/* TGL upper bound */ #define GEN_MAX_EU_STRIDE GEN_SSEU_STRIDE(GEN_MAX_EUS) +#define GEN_DSS_PER_GSLICE 4 +#define GEN_DSS_PER_CSLICE 8 +#define GEN_DSS_PER_MSLICE 8 +struct sseu_dev_info {u8 slice_mask;u8 subslice_mask[GEN_MAX_SLICES *GEN_MAX_SUBSLICE_STRIDE ];
@@ -104,4 +108,6 @@ void intel_sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p);void intel_sseu_print_topology (const struct sseu_dev_info *sseu,struct drm_printer *p); +u16 intel_slicemask_from_dssmask (u64 dss_mask,int dss_per_slice); +#endif /* __INTEL_SSEU_H__ */
drivers/gpu/drm/i915/gt/intel_workarounds.c +84 -5
108 lines not on this page · raw message
drivers/gpu/drm/i915/i915_drv.h +3 -0
@@ -1696,6 +1696,9 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,#define HAS_RUNTIME_PM (dev_priv) (INTEL_INFO(dev_priv)->has_runtime_pm)#define HAS_64BIT_RELOC (dev_priv) (INTEL_INFO(dev_priv)->has_64bit_reloc) +#define HAS_MSLICES (dev_priv) \ + (INTEL_INFO(dev_priv)->has_mslices) +#define HAS_IPC (dev_priv) (INTEL_INFO(dev_priv)->display.has_ipc)#define HAS_REGION (i915, i) (INTEL_INFO(i915)->memory_regions & (i))
drivers/gpu/drm/i915/i915_pci.c +1 -0
@@ -1012,6 +1012,7 @@ static const struct intel_device_info adl_p_info = { .has_llc = 1, \ .has_logical_ring_contexts = 1, \ .has_logical_ring_elsq = 1, \ + .has_mslices = 1, \ .has_rc6 = 1, \ .has_reset_engine = 1, \ .has_rps = 1, \
drivers/gpu/drm/i915/i915_reg.h +4 -0
@@ -2695,6 +2695,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN11_MCR_SLICE_MASK GEN11_MCR_SLICE(0xf)#define GEN11_MCR_SUBSLICE (subslice) (((subslice) & 0x7) << 24)#define GEN11_MCR_SUBSLICE_MASK GEN11_MCR_SUBSLICE(0x7) +#define GEN11_MCR_MULTICAST REG_BIT(31)#define RING_IPEIR (base) _MMIO((base) + 0x64)#define RING_IPEHR (base) _MMIO((base) + 0x68)#define RING_EIR (base) _MMIO((base) + 0xb0)
@@ -3113,6 +3114,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN10_MIRROR_FUSE3 _MMIO(0x9118)#define GEN10_L3BANK_PAIR_COUNT 4#define GEN10_L3BANK_MASK 0x0F +/* on Xe_HP the same fuses indicates mslices instead of L3 banks */ +#define GEN12_MAX_MSLICES 4 +#define GEN12_MEML3_EN_MASK 0x0F#define GEN8_EU_DISABLE0 _MMIO(0x9134)#define GEN8_EU_DIS0_S0_MASK 0xffffff
drivers/gpu/drm/i915/intel_device_info.h +1 -0
@@ -133,6 +133,7 @@ enum intel_ppgtt_type {func (has_llc); \func (has_logical_ring_contexts); \func (has_logical_ring_elsq); \ +func (has_mslices); \func (has_pooled_eu); \func (has_rc6); \func (has_rc6p); \
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v3 06/30] drm/i915/xehp: handle new steering options
Quoted 3 lines · Matt Roper
From: Daniele Ceraolo Spurio <[email protected]>
Xe_HPis more modular then its predecessors and as a consequence it
then -> than
Quoted 63 lines
has
more types of replicated registers. As with l3bank regions on previous
platforms, we may need to explicitly re-steer accesses to these new types of ranges at runtime if we can't find a single default steering value that satisfies the fusing of all types.Bspec: 66534
Cc: Tvrtko Ursulin <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio < [email protected]>Signed-off-by Matt Roper <[email protected]>--- drivers/gpu/drm/i915/gt/intel_gt.c | 40 ++++++++- drivers/gpu/drm/i915/gt/intel_gt.h | 1 + drivers/gpu/drm/i915/gt/intel_gt_types.h | 7 ++ drivers/gpu/drm/i915/gt/intel_region_lmem.c | 1 + drivers/gpu/drm/i915/gt/intel_sseu.c | 18 +++++ drivers/gpu/drm/i915/gt/intel_sseu.h | 6 ++ drivers/gpu/drm/i915/gt/intel_workarounds.c | 89 +++++++++++++++++++-- drivers/gpu/drm/i915/i915_drv.h | 3 + drivers/gpu/drm/i915/i915_pci.c | 1 + drivers/gpu/drm/i915/i915_reg.h | 4 + drivers/gpu/drm/i915/intel_device_info.h | 1 + 11 files changed, 165 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/gt/intel_gt.c +7
-0@@ -89,6 +89,13 @@ static const struct intel_mmio_range icl_l3bank_steering_table[] = { {}, }; +static u16 slicemask (struct intel_gt *gt,int count) +{ +u64 dss_mask =intel_sseu_get_subslices (>->info.sseu,0 ); + +return intel_slicemask_from_dssmask (dss_mask, count); +} +int intel_gt_init_mmio (struct intel_gt *gt) {drivers/gpu/drm/i915/gt/intel_gt.c +2
-1intel_gt_init_clock_frequency (gt);@@ -96,11 +103,24 @@ int intel_gt_init_mmio(struct intel_gt *gt)intel_uc_init_mmio (>->uc);intel_sseu_info_init (gt); -if (GRAPHICS_VER (gt->i915) >=11 ) { +/* +* An mslice is unavailable only if both the meml3 for the slice is
drivers/gpu/drm/i915/gt/intel_gt.c +1
-0+* disabled *and* all of the DSS in the slice (quadrant) are disabled.
drivers/gpu/drm/i915/gt/intel_gt.c +5
-0+*/ +if (HAS_MSLICES (gt->i915)) + gt->info.mslice_mask = + slicemask(gt, GEN_DSS_PER_MSLICE) | + (intel_uncore_read(gt->uncore,
GEN10_MIRROR_FUSE3) &
drivers/gpu/drm/i915/gt/intel_gt.c int intel_gt_init_mmio(struct intel_gt *gt) · line 117
Quoted 4 lines
drivers/gpu/drm/i915/gt/intel_gt.c +4
-0+ GEN12_MEML3_EN_MASK); + +if (GRAPHICS_VER (gt->i915) >=11 && +GRAPHICS_VER_FULL (gt->i915) <IP_VER (12 ,50 )) {
gt->i915 is referenced many times. It is better to define i915 = gt->i915;
Quoted 47 lines
drivers/gpu/drm/i915/gt/intel_gt.c +0
-0gt->steering_table[L3BANK ] = icl_l3bank_steering_table; gt->info.l3bank_mask = ~intel_uncore_read(gt->uncore,
GEN10_MIRROR_FUSE3) &drivers/gpu/drm/i915/gt/intel_gt.c +4
-0GEN10_L3BANK_MASK ; + }else if (HAS_MSLICES (gt->i915)) { +MISSING_CASE (INTEL_INFO (gt->i915)->platform); }return intel_engines_init_mmio (gt);@@ -785,6 +805,24 @@ static void intel_gt_get_valid_steering(structintel_gt *gt, *sliceid =0 ;/* unused */ *subsliceid =__ffs (gt->info.l3bank_mask);break ; +case MSLICE : +GEM_DEBUG_WARN_ON (!gt->info.mslice_mask);/* should be impossible! */
drivers/gpu/drm/i915/gt/intel_gt.c +6
-0+ + *sliceid =__ffs (gt->info.mslice_mask); + *subsliceid =0 ;/* unused */ +break ; +case LNCF : +GEM_DEBUG_WARN_ON (!gt->info.mslice_mask);/* should be impossible! */
drivers/gpu/drm/i915/gt/intel_gt.c +3
-0+ +/* +* 0xFDC[29:28] selects the mslice to steer to and 0xFDC[27]
drivers/gpu/drm/i915/gt/intel_gt.c +1
-0+* selects which LNCF within the mslice to steer to. An LNCF
drivers/gpu/drm/i915/gt/intel_gt.c +1
-0+* is always present if its mslice is present, so we can safely
drivers/gpu/drm/i915/gt/intel_gt.c +5
-0+* just steer to LNCF 0 in all cases. +*/ + *sliceid =__ffs (gt->info.mslice_mask) <<1 ; + *subsliceid =0 ;/* unused */ +break ;default :MISSING_CASE (type); *sliceid =0 ;drivers/gpu/drm/i915/gt/intel_gt.h +0
-0
drivers/gpu/drm/i915/gt/intel_gt.h static inline bool · line 88
Quoted 5 lines
drivers/gpu/drm/i915/gt/intel_gt.h +1
-0@@ -84,6 +84,7 @@ static inline bool intel_gt_needs_read_steering(struct intel_gt *gt, }u32 intel_gt_read_register_fw (struct intel_gt *gt,i915_reg_t reg); +u32 intel_gt_read_register (struct intel_gt *gt,i915_reg_t reg);
Shoulde this function declaration be included in this patch? I don't find corresponding body in this patch.
-caz
Quoted 300 lines
drivers/gpu/drm/i915/gt/intel_gt.h +0
-0void intel_gt_info_print (const struct intel_gt_info *info,struct drm_printer *p);drivers/gpu/drm/i915/gt/intel_gt_types.h +0
-0@@ -47,9 +47,14 @@ struct intel_mmio_range {* of multicast registers. If another type of steering does not have any
* overlap in valid steering targets with 'subslice' style
registers, we will
* need to explicitly re-steer reads of registers of the other type.
+ *
+ * Only the replication types that may need additional non-default steering
+ * are listed here.
*/
enumintel_steering_type{drivers/gpu/drm/i915/gt/intel_gt_types.h +4
-0L3BANK , +MSLICE , +LNCF , NUM_STEERING_TYPES };@@ -184,6 +189,8 @@ struct intel_gt {/* Slice/subslice/EU info */ struct sseu_dev_info sseu; + +unsigned long mslice_mask; } info; };drivers/gpu/drm/i915/gt/intel_region_lmem.c +1
-0@@ -10,6 +10,7 @@#include "gem/i915_gem_lmem.h" #include "gem/i915_gem_region.h" #include "gem/i915_gem_ttm.h" +#include "gt/intel_gt.h" static int init_fake_lmem_bar (struct intel_memory_region *mem) {drivers/gpu/drm/i915/gt/intel_sseu.c +7
-0@@ -759,3 +759,21 @@ void intel_sseu_print_topology(const struct sseu_dev_info *sseu, } } } + +u16 intel_slicemask_from_dssmask(u64 dss_mask, int dss_per_slice) +{ + u16 slice_mask = 0; + int i; + + WARN_ON(sizeof(dss_mask) * 8 / dss_per_slice > 8 *
sizeof(slice_mask));drivers/gpu/drm/i915/gt/intel_sseu.c +11
-0+ +for (i =0 ; dss_mask; i++) { +if (dss_mask &GENMASK (dss_per_slice -1 ,0 )) + slice_mask |=BIT (i); + + dss_mask >>= dss_per_slice; + } + +return slice_mask; +} +drivers/gpu/drm/i915/gt/intel_sseu.h +6
-0@@ -22,6 +22,10 @@ struct drm_printer;#define GEN_MAX_EUS (16)/* TGL upper bound */ #define GEN_MAX_EU_STRIDE GEN_SSEU_STRIDE(GEN_MAX_EUS) +#define GEN_DSS_PER_GSLICE 4 +#define GEN_DSS_PER_CSLICE 8 +#define GEN_DSS_PER_MSLICE 8 +struct sseu_dev_info {u8 slice_mask;u8 subslice_mask[GEN_MAX_SLICES *GEN_MAX_SUBSLICE_STRIDE ];@@ -104,4 +108,6 @@ void intel_sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p);void intel_sseu_print_topology (const struct sseu_dev_info *sseu,struct drm_printer *p); +u16 intel_slicemask_from_dssmask (u64 dss_mask,int dss_per_slice); +#endif /*
__INTEL_SSEU_H__*/drivers/gpu/drm/i915/gt/intel_workarounds.c +13
-1@@ -888,12 +888,24 @@ cfl_gt_workarounds_init(struct drm_i915_private *i915, struct i915_wa_list *wal) GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS); } +static void __add_mcr_wa (struct drm_i915_private *i915,struct i915_wa_list *wal, +unsigned slice,unsigned subslice) +{ +u32 mcr, mcr_mask; + + mcr =GEN11_MCR_SLICE (slice) |GEN11_MCR_SUBSLICE (subslice); + mcr_mask =GEN11_MCR_SLICE_MASK |GEN11_MCR_SUBSLICE_MASK ; + +drm_dbg (&i915->drm,"MCR slice/subslice = %x\n" , mcr); + +wa_write_clr_set (wal,GEN8_MCR_SELECTOR , mcr_mask, mcr); +} +static void icl_wa_init_mcr (struct drm_i915_private *i915,struct i915_wa_list *wal) {const struct sseu_dev_info *sseu = &i915->gt.info.sseu;unsigned int slice, subslice; -u32 mcr, mcr_mask;drivers/gpu/drm/i915/gt/intel_workarounds.c +14
-4GEM_BUG_ON (GRAPHICS_VER (i915) <11 );GEM_BUG_ON (hweight8 (sseu->slice_mask) >1 );@@ -918,12 +930,79 @@ icl_wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal)if (i915->gt.info.l3bank_mask &BIT (subslice)) i915->gt.steering_table[L3BANK ] =NULL ; - mcr =GEN11_MCR_SLICE (slice) |GEN11_MCR_SUBSLICE (subslice); - mcr_mask =GEN11_MCR_SLICE_MASK |GEN11_MCR_SUBSLICE_MASK ; +__add_mcr_wa (i915, wal, slice, subslice); +} -drm_dbg (&i915->drm,"MCR slice/subslice = %x\n" , mcr); +__maybe_unused +static void +xehp_init_mcr (struct intel_gt *gt,struct i915_wa_list *wal) +{ +struct drm_i915_private *i915 = gt->i915; +const struct sseu_dev_info *sseu = >->info.sseu; +unsigned long slice, subslice =0 , slice_mask =0 ; +u64 dss_mask =0 ; +u32 lncf_mask =0 ; +int i; -wa_write_clr_set (wal,GEN8_MCR_SELECTOR , mcr_mask, mcr); +/* +* On Xe_HP the steering increases in complexity. There are now several
drivers/gpu/drm/i915/gt/intel_workarounds.c +1
-0+* more units that require steering and we're not guaranteed to be able
drivers/gpu/drm/i915/gt/intel_workarounds.c +6
-0+* to find a common setting for all of them. These are: +* - GSLICE (fusable) +* - DSS (sub-unit within gslice; fusable) +* - L3 Bank (fusable) +* - MSLICE (fusable) +* - LNCF (sub-unit within mslice; always present if mslice is present)
drivers/gpu/drm/i915/gt/intel_workarounds.c +3
-0+* - SQIDI (always on) +* +* We'll do our default/implicit steering based on GSLICE (in the
drivers/gpu/drm/i915/gt/intel_workarounds.c +2
-0+* sliceid field) and DSS (in the subsliceid field). If we can +* find overlap between the valid MSLICE and/or LNCF values with
drivers/gpu/drm/i915/gt/intel_workarounds.c +1
-0+* a suitable GSLICE, then we can just re-use the default value and
drivers/gpu/drm/i915/gt/intel_workarounds.c +3
-0+* skip and explicit steering at runtime. +* +* We only need to look for overlap between GSLICE/MSLICE/LNCF to find
drivers/gpu/drm/i915/gt/intel_workarounds.c +1
-0+* a valid sliceid value. DSS steering is the only type of steering
drivers/gpu/drm/i915/gt/intel_workarounds.c +3
-0+* that utilizes the 'subsliceid' bits. +* +* Also note that, even though the steering domain is called "GSlice"
drivers/gpu/drm/i915/gt/intel_workarounds.c +1
-0+* and it is encoded in the register using the gslice format, the spec
drivers/gpu/drm/i915/gt/intel_workarounds.c +1
-0+* says that the combined (geometry | compute) fuse should be used to
drivers/gpu/drm/i915/gt/intel_workarounds.c +6
-0+* select the steering. +*/ + +/* Find the potential gslice candidates */ + dss_mask =intel_sseu_get_subslices (sseu,0 ); + slice_mask = intel_slicemask_from_dssmask(dss_mask,
GEN_DSS_PER_GSLICE);drivers/gpu/drm/i915/gt/intel_workarounds.c +3
-0+ +/* +* Find the potential LNCF candidates. Either LNCF within a valid
drivers/gpu/drm/i915/gt/intel_workarounds.c +7
-0+* mslice is fine. +*/ +for_each_set_bit (i, >->info.mslice_mask,GEN12_MAX_MSLICES ) + lncf_mask |= (0x3 << (i *2 )); + +/* +* Are there any sliceid values that work for both GSLICE and LNCF
drivers/gpu/drm/i915/gt/intel_workarounds.c +8
-0+* steering? +*/ +if (slice_mask & lncf_mask) { + slice_mask &= lncf_mask; + gt->steering_table[LNCF ] =NULL ; + } + +/* How about sliceid values that also work for MSLICE steering? */
drivers/gpu/drm/i915/gt/intel_workarounds.c +11
-0+if (slice_mask & gt->info.mslice_mask) { + slice_mask &= gt->info.mslice_mask; + gt->steering_table[MSLICE ] =NULL ; + } + + slice =__ffs (slice_mask); + subslice =__ffs (dss_mask >> (slice *GEN_DSS_PER_GSLICE )); +WARN_ON (subslice >GEN_DSS_PER_GSLICE ); +WARN_ON (dss_mask >> (slice *GEN_DSS_PER_GSLICE ) ==0 ); + +__add_mcr_wa (i915, wal, slice, subslice); } static voiddrivers/gpu/drm/i915/i915_drv.h +3
-0@@ -1696,6 +1696,9 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,#define HAS_RUNTIME_PM (dev_priv) (INTEL_INFO(dev_priv)- >has_runtime_pm)#define HAS_64BIT_RELOC (dev_priv) (INTEL_INFO(dev_priv)- >has_64bit_reloc) +#define HAS_MSLICES (dev_priv) \ + (INTEL_INFO(dev_priv)->has_mslices) +#define
HAS_IPC(dev_priv)(INTEL_INFO(dev_priv)-Quoted 1 line
display.has_ipc)
#define
HAS_REGION(i915, i)(INTEL_INFO(i915)->memory_regions & (i))drivers/gpu/drm/i915/i915_pci.c +1
-0@@ -1012,6 +1012,7 @@ static const struct intel_device_info adl_p_info = { .has_llc = 1, \ .has_logical_ring_contexts = 1, \ .has_logical_ring_elsq = 1, \ + .has_mslices = 1, \ .has_rc6 = 1, \ .has_reset_engine = 1, \drivers/gpu/drm/i915/i915_pci.c +0
-0.has_rps = 1, \drivers/gpu/drm/i915/i915_reg.h +1
-0@@ -2695,6 +2695,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN11_MCR_SLICE_MASK GEN11_MCR_SLICE(0xf)#define GEN11_MCR_SUBSLICE (subslice) (((subslice) & 0x7) << 24)#define GEN11_MCR_SUBSLICE_MASK GEN11_MCR_SUBSLICE(0x7) +#define GEN11_MCR_MULTICAST REG_BIT(31)#define RING_IPEIR (base) _MMIO((base) + 0x64)#define
RING_IPEHR(base)_MMIO((base) + 0x68)
#defineRING_EIR(base)_MMIO((base) + 0xb0)drivers/gpu/drm/i915/i915_reg.h +3
-0@@ -3113,6 +3114,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN10_MIRROR_FUSE3 _MMIO(0x9118)#define GEN10_L3BANK_PAIR_COUNT 4#define GEN10_L3BANK_MASK 0x0F +/* on Xe_HP the same fuses indicates mslices instead of L3 banks */ +#define GEN12_MAX_MSLICES 4 +#define GEN12_MEML3_EN_MASK 0x0F#define GEN8_EU_DISABLE0 _MMIO(0x9134)#define
GEN8_EU_DIS0_S0_MASK0xffffffdrivers/gpu/drm/i915/intel_device_info.h +0
-0
drivers/gpu/drm/i915/intel_device_info.h enum intel_ppgtt_type { · line 139
Quoted 7 lines
drivers/gpu/drm/i915/intel_device_info.h +1
-0@@ -133,6 +133,7 @@ enum intel_ppgtt_type {func (has_llc); \func (has_logical_ring_contexts); \func (has_logical_ring_elsq); \ +func (has_mslices); \func (has_pooled_eu); \func (has_rc6); \func (has_rc6p); \
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 7/30 drm/i915/xehp: Loop over all gslices for INSTDONE processing
In reply to Matt RoperWe no longer have traditional slices on Xe_HP platforms, but the INSTDONE registers are replicated according to gslice representation which is similar. We can mostly re-use the existing instdone code with just a few modifications:
* Create an alternate instdone loop macro that will iterate over the flat DSS space, but still provide the gslice/dss steering values for compatibility with the legacy code.
* We should allocate INSTDONE storage space according to the maximum number of gslices rather than the maximum number of legacy slices to ensure we have enough storage space to hold all of the values. XeHP design has 8 gslices, whereas older platforms never had more than 3 slices.
--- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 48 +++++++++++--------- drivers/gpu/drm/i915/gt/intel_engine_types.h | 12 ++++- drivers/gpu/drm/i915/gt/intel_sseu.h | 7 +++ drivers/gpu/drm/i915/i915_gpu_error.c | 32 +++++++++---- 4 files changed, 66 insertions(+), 33 deletions(-)
drivers/gpu/drm/i915/gt/intel_engine_cs.c +26 -22
@@ -1172,16 +1172,16 @@ void intel_engine_get_instdone(const struct intel_engine_cs *engine,u32 mmio_base = engine->mmio_base;int slice;int subslice; +int iter;memset (instdone,0 ,sizeof (*instdone)); -switch (GRAPHICS_VER (i915)) { -default : +if (GRAPHICS_VER (i915) >=8 ) { instdone->instdone =intel_uncore_read (uncore,RING_INSTDONE (mmio_base));if (engine->id !=RCS0 ) -break ; +return ; instdone->slice_common =intel_uncore_read (uncore,GEN7_SC_INSTDONE );
@@ -1191,21 +1191,32 @@ void intel_engine_get_instdone(const struct intel_engine_cs *engine, instdone->slice_common_extra[1 ] =intel_uncore_read (uncore,GEN12_SC_INSTDONE_EXTRA2 ); } -for_each_instdone_slice_subslice (i915, sseu, slice, subslice) { - instdone->sampler[slice][subslice] = -read_subslice_reg (engine, slice, subslice, -GEN7_SAMPLER_INSTDONE ); - instdone->row[slice][subslice] = -read_subslice_reg (engine, slice, subslice, -GEN7_ROW_INSTDONE ); + +if (GRAPHICS_VER_FULL (i915) >=IP_VER (12 ,50 )) { +for_each_instdone_gslice_dss_xehp (i915, sseu, iter, slice, subslice) { + instdone->sampler[slice][subslice] = +read_subslice_reg (engine, slice, subslice, +GEN7_SAMPLER_INSTDONE ); + instdone->row[slice][subslice] = +read_subslice_reg (engine, slice, subslice, +GEN7_ROW_INSTDONE ); + } + }else { +for_each_instdone_slice_subslice (i915, sseu, slice, subslice) { + instdone->sampler[slice][subslice] = +read_subslice_reg (engine, slice, subslice, +GEN7_SAMPLER_INSTDONE ); + instdone->row[slice][subslice] = +read_subslice_reg (engine, slice, subslice, +GEN7_ROW_INSTDONE ); + } } -break ; -case 7 : + }else if (GRAPHICS_VER (i915) >=7 ) { instdone->instdone =intel_uncore_read (uncore,RING_INSTDONE (mmio_base));if (engine->id !=RCS0 ) -break ; +return ; instdone->slice_common =intel_uncore_read (uncore,GEN7_SC_INSTDONE );
@@ -1213,22 +1224,15 @@ void intel_engine_get_instdone(const struct intel_engine_cs *engine,intel_uncore_read (uncore,GEN7_SAMPLER_INSTDONE ); instdone->row[0 ][0 ] =intel_uncore_read (uncore,GEN7_ROW_INSTDONE ); - -break ; -case 6 : -case 5 : -case 4 : + }else if (GRAPHICS_VER (i915) >=4 ) { instdone->instdone =intel_uncore_read (uncore,RING_INSTDONE (mmio_base));if (engine->id ==RCS0 )/* HACK: Using the wrong struct member */ instdone->slice_common =intel_uncore_read (uncore,GEN4_INSTDONE1 ); -break ; -case 3 : -case 2 : + }else { instdone->instdone =intel_uncore_read (uncore,GEN2_INSTDONE ); -break ; } }
drivers/gpu/drm/i915/gt/intel_engine_types.h +10 -2
@@ -74,8 +74,8 @@ struct intel_instdone {/* The following exist only in the RCS engine */ u32 slice_common;u32 slice_common_extra[2 ]; -u32 sampler[I915_MAX_SLICES ][I915_MAX_SUBSLICES ]; -u32 row[I915_MAX_SLICES ][I915_MAX_SUBSLICES ]; +u32 sampler[GEN_MAX_GSLICES ][I915_MAX_SUBSLICES ]; +u32 row[GEN_MAX_GSLICES ][I915_MAX_SUBSLICES ]; };/*
@@ -575,4 +575,12 @@ intel_engine_has_relative_mmio(const struct intel_engine_cs * const engine)for_each_if ((instdone_has_slice (dev_priv_, sseu_, slice_)) && \ (instdone_has_subslice (dev_priv_, sseu_, slice_, \ subslice_))) + +#define for_each_instdone_gslice_dss_xehp (dev_priv_, sseu_, iter_, gslice_, dss_) \ + for ((iter_) = 0, (gslice_) = 0, (dss_) = 0; \ + (iter_) < GEN_MAX_SUBSLICES; \ + (iter_)++, (gslice_) = (iter_) / GEN_DSS_PER_GSLICE, \ + (dss_) = (iter_) % GEN_DSS_PER_GSLICE) \ + for_each_if(intel_sseu_has_subslice((sseu_), 0, (iter_))) +#endif /* __INTEL_ENGINE_TYPES_H__ */
drivers/gpu/drm/i915/gt/intel_sseu.h +7 -0
@@ -26,6 +26,9 @@ struct drm_printer;#define GEN_DSS_PER_CSLICE 8#define GEN_DSS_PER_MSLICE 8 +#define GEN_MAX_GSLICES (GEN_MAX_SUBSLICES / GEN_DSS_PER_GSLICE) +#define GEN_MAX_CSLICES (GEN_MAX_SUBSLICES / GEN_DSS_PER_CSLICE) +struct sseu_dev_info {u8 slice_mask;u8 subslice_mask[GEN_MAX_SLICES *GEN_MAX_SUBSLICE_STRIDE ];
@@ -78,6 +81,10 @@ intel_sseu_has_subslice(const struct sseu_dev_info *sseu, int slice,u8 mask;int ss_idx = subslice /BITS_PER_BYTE ; +if (slice >= sseu->max_slices || + subslice >= sseu->max_subslices) +return false; +GEM_BUG_ON (ss_idx >= sseu->ss_stride); mask = sseu->subslice_mask[slice * sseu->ss_stride + ss_idx];
drivers/gpu/drm/i915/i915_gpu_error.c +23 -9
@@ -444,15 +444,29 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,if (GRAPHICS_VER (m->i915) <=6 )return ; -for_each_instdone_slice_subslice (m->i915, sseu, slice, subslice) -err_printf (m," SAMPLER_INSTDONE[%d][%d]: 0x%08x\n" , - slice, subslice, - ee->instdone.sampler[slice][subslice]); - -for_each_instdone_slice_subslice (m->i915, sseu, slice, subslice) -err_printf (m," ROW_INSTDONE[%d][%d]: 0x%08x\n" , - slice, subslice, - ee->instdone.row[slice][subslice]); +if (GRAPHICS_VER_FULL (m->i915) >=IP_VER (12 ,50 )) { +int iter; + +for_each_instdone_gslice_dss_xehp (m->i915, sseu, iter, slice, subslice) +err_printf (m," SAMPLER_INSTDONE[%d][%d]: 0x%08x\n" , + slice, subslice, + ee->instdone.sampler[slice][subslice]); + +for_each_instdone_gslice_dss_xehp (m->i915, sseu, iter, slice, subslice) +err_printf (m," ROW_INSTDONE[%d][%d]: 0x%08x\n" , + slice, subslice, + ee->instdone.row[slice][subslice]); + }else { +for_each_instdone_slice_subslice (m->i915, sseu, slice, subslice) +err_printf (m," SAMPLER_INSTDONE[%d][%d]: 0x%08x\n" , + slice, subslice, + ee->instdone.sampler[slice][subslice]); + +for_each_instdone_slice_subslice (m->i915, sseu, slice, subslice) +err_printf (m," ROW_INSTDONE[%d][%d]: 0x%08x\n" , + slice, subslice, + ee->instdone.row[slice][subslice]); + }if (GRAPHICS_VER (m->i915) <12 )return ;
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 8/30 drm/i915/xehp: Changes to ss/eu definitions
In reply to Matt RoperFrom: Matthew Auld <[email protected]>
Xe_HP no longer has "slices" in the same way that old platforms did. There are new concepts (gslices, cslices, mslices) that apply in various contexts, but for the purposes of fusing slices no longer exist and we just have one large pool of dual-subslices (DSS) to work with. Furthermore, the meaning of the DSS fuse is inverted compared to past platforms --- it now specifies which DSS are enabled rather than which ones are disabled.
--- drivers/gpu/drm/i915/gt/intel_sseu.c | 24 ++++++++++++++++++++---- drivers/gpu/drm/i915/i915_getparam.c | 6 ++++-- drivers/gpu/drm/i915/i915_reg.h | 3 +++ 3 files changed, 27 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +20 -4
@@ -139,17 +139,33 @@ static void gen12_sseu_info_init(struct intel_gt *gt)* Gen12 has Dual-Subslices, which behave similarly to 2 gen11 SS. * Instead of splitting these, provide userspace with an array * of DSS to more closely represent the hardware resource. +* +* In addition, the concept of slice has been removed in Xe_HP. +* To be compatible with prior generations, assume a single slice +* across the entire device. Then calculate out the DSS for each +* workload type within that software slice. */ intel_sseu_set_info (sseu,1 ,6 ,16 ); - s_en =intel_uncore_read (uncore,GEN11_GT_SLICE_ENABLE ) & -GEN11_GT_S_ENA_MASK ; +/* +* As mentioned above, Xe_HP does not have the concept of a slice. +* Enable one for software backwards compatibility. +*/ +if (GRAPHICS_VER_FULL (gt->i915) >=IP_VER (12 ,50 )) + s_en =0x1 ; +else + s_en =intel_uncore_read (uncore,GEN11_GT_SLICE_ENABLE ) & +GEN11_GT_S_ENA_MASK ; dss_en =intel_uncore_read (uncore,GEN12_GT_DSS_ENABLE );/* one bit per pair of EUs */ - eu_en_fuse = ~(intel_uncore_read (uncore,GEN11_EU_DISABLE ) & -GEN11_EU_DIS_MASK ); +if (GRAPHICS_VER_FULL (gt->i915) >=IP_VER (12 ,50 )) + eu_en_fuse =intel_uncore_read (uncore,XEHP_EU_ENABLE ) &XEHP_EU_ENA_MASK ; +else + eu_en_fuse = ~(intel_uncore_read (uncore,GEN11_EU_DISABLE ) & +GEN11_EU_DIS_MASK ); +for (eu =0 ; eu < sseu->max_eus_per_subslice /2 ; eu++)if (eu_en_fuse &BIT (eu)) eu_en |=BIT (eu *2 ) |BIT (eu *2 +1 );
drivers/gpu/drm/i915/i915_getparam.c +4 -2
@@ -15,7 +15,7 @@ int i915_getparam_ioctl(struct drm_device *dev, void *data,struct pci_dev *pdev =to_pci_dev (dev->dev);const struct sseu_dev_info *sseu = &i915->gt.info.sseu;drm_i915_getparam_t *param = data; -int value; +int value =0 ;switch (param->param) {case I915_PARAM_IRQ_ACTIVE :
@@ -150,7 +150,9 @@ int i915_getparam_ioctl(struct drm_device *dev, void *data,return -ENODEV ;break ;case I915_PARAM_SUBSLICE_MASK : - value = sseu->subslice_mask[0 ]; +/* Only copy bits from the first slice */ +memcpy (&value, sseu->subslice_mask, +min (sseu->ss_stride, (u8 )sizeof (value)));if (!value)return -ENODEV ;break ;
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -3151,6 +3151,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN12_GT_DSS_ENABLE _MMIO(0x913C) +#define XEHP_EU_ENABLE _MMIO(0x9134) +#define XEHP_EU_ENA_MASK 0xFF +#define GEN6_BSD_SLEEP_PSMI_CONTROL _MMIO(0x12050)#define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0)#define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2)
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 9/30 drm/i915/xehpsdv: Add maximum sseu limits
In reply to Matt RoperDue to the removal of legacy slices and the transition to a gslice/cslice/mslice/etc. design, we'll internally store all DSS under "slice0."
--- drivers/gpu/drm/i915/gt/intel_sseu.c | 5 ++++- drivers/gpu/drm/i915/gt/intel_sseu.h | 2 +- drivers/gpu/drm/i915/gt/intel_sseu_debugfs.c | 2 +- 3 files changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +4 -1
@@ -145,7 +145,10 @@ static void gen12_sseu_info_init(struct intel_gt *gt)* across the entire device. Then calculate out the DSS for each * workload type within that software slice. */ -intel_sseu_set_info (sseu,1 ,6 ,16 ); +if (IS_XEHPSDV (gt->i915)) +intel_sseu_set_info (sseu,1 ,32 ,16 ); +else +intel_sseu_set_info (sseu,1 ,6 ,16 );/* * As mentioned above, Xe_HP does not have the concept of a slice.
drivers/gpu/drm/i915/gt/intel_sseu.h +1 -1
@@ -16,7 +16,7 @@ struct intel_gt;struct drm_printer ;#define GEN_MAX_SLICES (6)/* CNL upper bound */ -#define GEN_MAX_SUBSLICES (8)/* ICL upper bound */ +#define GEN_MAX_SUBSLICES (32)/* XEHPSDV upper bound */ #define GEN_SSEU_STRIDE (max_entries) DIV_ROUND_UP(max_entries, BITS_PER_BYTE)#define GEN_MAX_SUBSLICE_STRIDE GEN_SSEU_STRIDE(GEN_MAX_SUBSLICES)#define GEN_MAX_EUS (16)/* TGL upper bound */
drivers/gpu/drm/i915/gt/intel_sseu_debugfs.c +1 -1
@@ -53,7 +53,7 @@ static void cherryview_sseu_device_status(struct intel_gt *gt,static void gen10_sseu_device_status (struct intel_gt *gt,struct sseu_dev_info *sseu) { -#define SS_MAX 6 +#define SS_MAX 8struct intel_uncore *uncore = gt->uncore;const struct intel_gt_info *info = >->info;u32 s_reg[SS_MAX ], eu_reg[2 *SS_MAX ], eu_mask[2 ];
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 10/30 drm/i915/xehpsdv: Add compute DSS type
In reply to Matt RoperFrom: Stuart Summers <[email protected]>
Starting in XeHP, the concept of slice has been removed in favor of DSS (Dual-Subslice) masks for various workload types. These workloads have been divided into those enabled for geometry and those enabled for compute.
i915 currently maintains a single set of S/SS/EU masks for the device. The goal of this patch set is to minimize the amount of impact to prior generations while still giving the user maximum flexibility.
Bspec: 33117, 33118, 20376
--- drivers/gpu/drm/i915/gt/intel_sseu.c | 73 ++++++++++++++++++++-------- drivers/gpu/drm/i915/gt/intel_sseu.h | 5 +- drivers/gpu/drm/i915/i915_reg.h | 3 +- include/uapi/drm/i915_drm.h | 3 -- 4 files changed, 59 insertions(+), 25 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +53 -20
@@ -46,11 +46,11 @@ u32 intel_sseu_get_subslices(const struct sseu_dev_info *sseu, u8 slice) }void intel_sseu_set_subslices (struct sseu_dev_info *sseu,int slice, -u32 ss_mask) +u8 *subslice_mask,u32 ss_mask) {int offset = slice * sseu->ss_stride; -memcpy (&sseu->subslice_mask[offset], &ss_mask, sseu->ss_stride); +memcpy (&subslice_mask[offset], &ss_mask, sseu->ss_stride); }unsigned int
@@ -100,14 +100,24 @@ static u16 compute_eu_total(const struct sseu_dev_info *sseu)return total; } -static void gen11_compute_sseu_info (struct sseu_dev_info *sseu, -u8 s_en,u32 ss_en,u16 eu_en) +static u32 get_ss_stride_mask (struct sseu_dev_info *sseu,u8 s,u32 ss_en) +{ +u32 ss_mask; + + ss_mask = ss_en >> (s * sseu->max_subslices); + ss_mask &=GENMASK (sseu->max_subslices -1 ,0 ); + +return ss_mask; +} + +static void gen11_compute_sseu_info (struct sseu_dev_info *sseu,u8 s_en, +u32 g_ss_en,u32 c_ss_en,u16 eu_en) {int s, ss; -/* ss_en represents entire subslice mask across all slices */ +/* g_ss_en/c_ss_en represent entire subslice mask across all slices */ GEM_BUG_ON (sseu->max_slices * sseu->max_subslices > -sizeof (ss_en) *BITS_PER_BYTE ); +sizeof (g_ss_en) *BITS_PER_BYTE );for (s =0 ; s < sseu->max_slices; s++) {if ((s_en &BIT (s)) ==0 )
@@ -115,7 +125,23 @@ static void gen11_compute_sseu_info(struct sseu_dev_info *sseu, sseu->slice_mask |=BIT (s); -intel_sseu_set_subslices (sseu, s, ss_en); +/* +* XeHP introduces the concept of compute vs +* geometry DSS. To reduce variation between GENs +* around subslice usage, store a mask for both the +* geometry and compute enabled masks, to provide +* to user space later in QUERY_TOPOLOGY_INFO, and +* compute a total enabled subslice count for the +* purposes of selecting subslices to use in a +* particular GEM context. +*/ +intel_sseu_set_subslices (sseu, s, sseu->compute_subslice_mask, +get_ss_stride_mask (sseu, s, c_ss_en)); +intel_sseu_set_subslices (sseu, s, sseu->geometry_subslice_mask, +get_ss_stride_mask (sseu, s, g_ss_en)); +intel_sseu_set_subslices (sseu, s, sseu->subslice_mask, +get_ss_stride_mask (sseu, s, + g_ss_en | c_ss_en));for (ss =0 ; ss < sseu->max_subslices; ss++)if (intel_sseu_has_subslice (sseu, s, ss))
@@ -129,7 +155,7 @@ static void gen12_sseu_info_init(struct intel_gt *gt) {struct sseu_dev_info *sseu = >->info.sseu;struct intel_uncore *uncore = gt->uncore; -u32 dss_en; +u32 g_dss_en, c_dss_en =0 ;u16 eu_en =0 ;u8 eu_en_fuse;u8 s_en;
@@ -145,10 +171,12 @@ static void gen12_sseu_info_init(struct intel_gt *gt)* across the entire device. Then calculate out the DSS for each * workload type within that software slice. */ -if (IS_XEHPSDV (gt->i915)) +if (IS_XEHPSDV (gt->i915)) {intel_sseu_set_info (sseu,1 ,32 ,16 ); -else + sseu->has_compute_dss =1 ; + }else {intel_sseu_set_info (sseu,1 ,6 ,16 ); + }/* * As mentioned above, Xe_HP does not have the concept of a slice.
@@ -160,7 +188,9 @@ static void gen12_sseu_info_init(struct intel_gt *gt) s_en =intel_uncore_read (uncore,GEN11_GT_SLICE_ENABLE ) &GEN11_GT_S_ENA_MASK ; - dss_en =intel_uncore_read (uncore,GEN12_GT_DSS_ENABLE ); + g_dss_en =intel_uncore_read (uncore,GEN12_GT_GEOMETRY_DSS_ENABLE ); +if (sseu->has_compute_dss) + c_dss_en =intel_uncore_read (uncore,GEN12_GT_COMPUTE_DSS_ENABLE );/* one bit per pair of EUs */ if (GRAPHICS_VER_FULL (gt->i915) >=IP_VER (12 ,50 ))
@@ -173,7 +203,7 @@ static void gen12_sseu_info_init(struct intel_gt *gt)if (eu_en_fuse &BIT (eu)) eu_en |=BIT (eu *2 ) |BIT (eu *2 +1 ); -gen11_compute_sseu_info (sseu, s_en, dss_en, eu_en); +gen11_compute_sseu_info (sseu, s_en, g_dss_en, c_dss_en, eu_en);/* TGL only supports slice-level power gating */ sseu->has_slice_pg =1 ;
@@ -199,7 +229,7 @@ static void gen11_sseu_info_init(struct intel_gt *gt) eu_en = ~(intel_uncore_read (uncore,GEN11_EU_DISABLE ) &GEN11_EU_DIS_MASK ); -gen11_compute_sseu_info (sseu, s_en, ss_en, eu_en); +gen11_compute_sseu_info (sseu, s_en, ss_en,0 , eu_en);/* ICL has no power gating restrictions. */ sseu->has_slice_pg =1 ;
@@ -260,9 +290,9 @@ static void gen10_sseu_info_init(struct intel_gt *gt)* Slice0 can have up to 3 subslices, but there are only 2 in * slice1/2. */ -intel_sseu_set_subslices (sseu, s, s ==0 ? - subslice_mask_with_eus : - subslice_mask_with_eus &0x3 ); +intel_sseu_set_subslices (sseu, s, sseu->subslice_mask, + s ==0 ? subslice_mask_with_eus : + subslice_mask_with_eus &0x3 ); } sseu->eu_total =compute_eu_total (sseu);
@@ -317,7 +347,7 @@ static void cherryview_sseu_info_init(struct intel_gt *gt)sseu_set_eus (sseu,0 ,1 , ~disabled_mask); } -intel_sseu_set_subslices (sseu,0 , subslice_mask); +intel_sseu_set_subslices (sseu,0 , sseu->subslice_mask, subslice_mask); sseu->eu_total =compute_eu_total (sseu);
@@ -373,7 +403,8 @@ static void gen9_sseu_info_init(struct intel_gt *gt)/* skip disabled slice */ continue ; -intel_sseu_set_subslices (sseu, s, subslice_mask); +intel_sseu_set_subslices (sseu, s, sseu->subslice_mask, + subslice_mask); eu_disable =intel_uncore_read (uncore,GEN9_EU_DISABLE (s));for (ss =0 ; ss < sseu->max_subslices; ss++) {
@@ -485,7 +516,8 @@ static void bdw_sseu_info_init(struct intel_gt *gt)/* skip disabled slice */ continue ; -intel_sseu_set_subslices (sseu, s, subslice_mask); +intel_sseu_set_subslices (sseu, s, sseu->subslice_mask, + subslice_mask);for (ss =0 ; ss < sseu->max_subslices; ss++) {u8 eu_disabled_mask;
@@ -583,7 +615,8 @@ static void hsw_sseu_info_init(struct intel_gt *gt) sseu->eu_per_subslice);for (s =0 ; s < sseu->max_slices; s++) { -intel_sseu_set_subslices (sseu, s, subslice_mask); +intel_sseu_set_subslices (sseu, s, sseu->subslice_mask, + subslice_mask);for (ss =0 ; ss < sseu->max_subslices; ss++) { sseu_set_eus(sseu, s, ss,
drivers/gpu/drm/i915/gt/intel_sseu.h +4 -1
@@ -32,6 +32,8 @@ struct drm_printer;struct sseu_dev_info {u8 slice_mask;u8 subslice_mask[GEN_MAX_SLICES *GEN_MAX_SUBSLICE_STRIDE ]; +u8 geometry_subslice_mask[GEN_MAX_SLICES *GEN_MAX_SUBSLICE_STRIDE ]; +u8 compute_subslice_mask[GEN_MAX_SLICES *GEN_MAX_SUBSLICE_STRIDE ];u8 eu_mask[GEN_MAX_SLICES *GEN_MAX_SUBSLICES *GEN_MAX_EU_STRIDE ];u16 eu_total;u8 eu_per_subslice;
@@ -41,6 +43,7 @@ struct sseu_dev_info { u8 has_slice_pg:1; u8 has_subslice_pg:1; u8 has_eu_pg:1; + u8 has_compute_dss:1;/* Topology fields */ u8 max_slices;
@@ -104,7 +107,7 @@ intel_sseu_subslices_per_slice(const struct sseu_dev_info *sseu, u8 slice);u32 intel_sseu_get_subslices (const struct sseu_dev_info *sseu,u8 slice);void intel_sseu_set_subslices (struct sseu_dev_info *sseu,int slice, -u32 ss_mask); +u8 *subslice_mask,u32 ss_mask);void intel_sseu_info_init (struct intel_gt *gt);
drivers/gpu/drm/i915/i915_reg.h +2 -1
@@ -3149,7 +3149,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN11_GT_SUBSLICE_DISABLE _MMIO(0x913C) -#define GEN12_GT_DSS_ENABLE _MMIO(0x913C) +#define GEN12_GT_GEOMETRY_DSS_ENABLE _MMIO(0x913C) +#define GEN12_GT_COMPUTE_DSS_ENABLE _MMIO(0x9144)#define XEHP_EU_ENABLE _MMIO(0x9134)#define XEHP_EU_ENA_MASK 0xFF
include/uapi/drm/i915_drm.h +0 -3
@@ -2580,9 +2580,6 @@ struct drm_i915_query {* Z / 8] >> (Z % 8)) & 1 */ struct drm_i915_query_topology_info { -/* -* Unused for now. Must be cleared to zero. -*/ __u16 flags;__u16 max_slices;
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 11/30 drm/i915/xehpsdv: Define steering tables
In reply to Matt RoperDefine and initialize the MMIO ranges for which XeHP SDV requires MSLICE and LNCF steering.
Bspec: 66534
--- drivers/gpu/drm/i915/gt/intel_gt.c | 19 ++++++++++++++++++- drivers/gpu/drm/i915/gt/intel_workarounds.c | 11 +++++++++-- 2 files changed, 27 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/gt/intel_gt.c +18 -1
@@ -89,6 +89,20 @@ static const struct intel_mmio_range icl_l3bank_steering_table[] = { {}, }; +static const struct intel_mmio_range xehpsdv_mslice_steering_table[] = { + {0x004000 ,0x004AFF }, + {0x00C800 ,0x00CFFF }, + {0x00DD00 ,0x00DDFF }, + {0x00E900 ,0x00FFFF },/* 0xEA00 - OxEFFF is unused */ + {}, +}; + +static const struct intel_mmio_range xehpsdv_lncf_steering_table[] = { + {0x00B000 ,0x00B0FF }, + {0x00D800 ,0x00D8FF }, + {}, +}; +static u16 slicemask (struct intel_gt *gt,int count) {u64 dss_mask =intel_sseu_get_subslices (>->info.sseu,0 );
@@ -113,7 +127,10 @@ int intel_gt_init_mmio(struct intel_gt *gt) (intel_uncore_read (gt->uncore,GEN10_MIRROR_FUSE3 ) &GEN12_MEML3_EN_MASK ); -if (GRAPHICS_VER (gt->i915) >=11 && +if (IS_XEHPSDV (gt->i915)) { + gt->steering_table[MSLICE ] = xehpsdv_mslice_steering_table; + gt->steering_table[LNCF ] = xehpsdv_lncf_steering_table; + }else if (GRAPHICS_VER (gt->i915) >=11 &&GRAPHICS_VER_FULL (gt->i915) <IP_VER (12 ,50 )) { gt->steering_table[L3BANK ] = icl_l3bank_steering_table; gt->info.l3bank_mask =
drivers/gpu/drm/i915/gt/intel_workarounds.c +9 -2
@@ -933,7 +933,6 @@ icl_wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal)__add_mcr_wa (i915, wal, slice, subslice); } -__maybe_unused static void xehp_init_mcr (struct intel_gt *gt,struct i915_wa_list *wal) {
@@ -1135,10 +1134,18 @@ dg1_gt_workarounds_init(struct drm_i915_private *i915, struct i915_wa_list *wal) VSUNIT_CLKGATE_DIS_TGL); } +static void +xehpsdv_gt_workarounds_init (struct drm_i915_private *i915,struct i915_wa_list *wal) +{ +xehp_init_mcr (&i915->gt, wal); +} +static void gt_init_workarounds (struct drm_i915_private *i915,struct i915_wa_list *wal) { -if (IS_DG1 (i915)) +if (IS_XEHPSDV (i915)) +xehpsdv_gt_workarounds_init (i915, wal); +else if (IS_DG1 (i915))dg1_gt_workarounds_init (i915, wal);else if (IS_TIGERLAKE (i915))tgl_gt_workarounds_init (i915, wal);
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 12/30 drm/i915/xehpsdv: Define MOCS table for XeHP SDV
In reply to Matt RoperFrom: Lucas De Marchi <[email protected]>
Like DG1, XeHP SDV doesn't have LLC/eDRAM control values due to being a dgfx card. XeHP SDV adds 2 more bits: L3_GLBGO to "push the Go point to memory for L3 destined transaction" and L3_LKP to "enable Lookup for uncacheable accesses".
Bspec: 45101
--- drivers/gpu/drm/i915/gt/intel_mocs.c | 33 +++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_mocs.c +32 -1
@@ -40,6 +40,8 @@ struct drm_i915_mocs_table {#define L3_ESC (value) ((value) << 0)#define L3_SCC (value) ((value) << 1)#define _L3_CACHEABILITY (value) ((value) << 4) +#define L3_GLBGO (value) ((value) << 6) +#define L3_LKUP (value) ((value) << 7)/* Helper defines */ #define GEN9_NUM_MOCS_ENTRIES 64/* 63-64 are reserved, but configured. */
@@ -314,6 +316,31 @@ static const struct drm_i915_mocs_entry dg1_mocs_table[] = { MOCS_ENTRY(63, 0, L3_1_UC), }; +static const struct drm_i915_mocs_entry xehpsdv_mocs_table[] = { +/* wa_1608975824 */ +MOCS_ENTRY (0 ,0 ,L3_3_WB |L3_LKUP (1 )), + +/* UC - Coherent; GO:L3 */ +MOCS_ENTRY (1 ,0 ,L3_1_UC |L3_LKUP (1 )), +/* UC - Coherent; GO:Memory */ +MOCS_ENTRY (2 ,0 ,L3_1_UC |L3_GLBGO (1 ) |L3_LKUP (1 )), +/* UC - Non-Coherent; GO:Memory */ +MOCS_ENTRY (3 ,0 ,L3_1_UC |L3_GLBGO (1 )), +/* UC - Non-Coherent; GO:L3 */ +MOCS_ENTRY (4 ,0 ,L3_1_UC ), + +/* WB */ +MOCS_ENTRY (5 ,0 ,L3_3_WB |L3_LKUP (1 )), + +/* HW Reserved - SW program but never use. */ +MOCS_ENTRY (48 ,0 ,L3_3_WB |L3_LKUP (1 )), +MOCS_ENTRY (49 ,0 ,L3_1_UC |L3_LKUP (1 )), +MOCS_ENTRY (60 ,0 ,L3_1_UC ), +MOCS_ENTRY (61 ,0 ,L3_1_UC ), +MOCS_ENTRY (62 ,0 ,L3_1_UC ), +MOCS_ENTRY (63 ,0 ,L3_1_UC ), +}; +enum {HAS_GLOBAL_MOCS =BIT (0 ),HAS_ENGINE_MOCS =BIT (1 ),
@@ -340,7 +367,11 @@ static unsigned int get_mocs_settings(const struct drm_i915_private *i915, {unsigned int flags; -if (IS_DG1 (i915)) { +if (IS_XEHPSDV (i915)) { + table->size =ARRAY_SIZE (xehpsdv_mocs_table); + table->table = xehpsdv_mocs_table; + table->n_entries =GEN9_NUM_MOCS_ENTRIES ; + }else if (IS_DG1 (i915)) { table->size =ARRAY_SIZE (dg1_mocs_table); table->table = dg1_mocs_table; table->n_entries =GEN9_NUM_MOCS_ENTRIES ;
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 13/30 drm/i915/xehpsdv: factor out function to read RP_STATE_CAP
In reply to Matt RoperFrom: Lucas De Marchi <[email protected]>
Instead of maintaining the same if ladder in 3 different places, add a function to read RP_STATE_CAP.
--- drivers/gpu/drm/i915/gt/debugfs_gt_pm.c | 8 +++----- drivers/gpu/drm/i915/gt/intel_rps.c | 17 ++++++++++++----- drivers/gpu/drm/i915/gt/intel_rps.h | 1 + drivers/gpu/drm/i915/i915_debugfs.c | 8 +++----- 4 files changed, 19 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/gt/debugfs_gt_pm.c +3 -5
@@ -309,13 +309,11 @@ static int frequency_show(struct seq_file *m, void *unused)int max_freq; rp_state_limits =intel_uncore_read (uncore,GEN6_RP_STATE_LIMITS ); -if (IS_GEN9_LP (i915)) { - rp_state_cap =intel_uncore_read (uncore,BXT_RP_STATE_CAP ); + rp_state_cap =intel_rps_read_state_cap (rps); +if (IS_GEN9_LP (i915)) gt_perf_status =intel_uncore_read (uncore,BXT_GT_PERF_STATUS ); - }else { - rp_state_cap =intel_uncore_read (uncore,GEN6_RP_STATE_CAP ); +else gt_perf_status =intel_uncore_read (uncore,GEN6_GT_PERF_STATUS ); - }/* RPSTAT1 is in the GT power well */ intel_uncore_forcewake_get (uncore,FORCEWAKE_ALL );
drivers/gpu/drm/i915/gt/intel_rps.c +12 -5
@@ -975,20 +975,16 @@ int intel_rps_set(struct intel_rps *rps, u8 val)static void gen6_rps_init (struct intel_rps *rps) {struct drm_i915_private *i915 =rps_to_i915 (rps); -struct intel_uncore *uncore =rps_to_uncore (rps); +u32 rp_state_cap =intel_rps_read_state_cap (rps);/* All of these values are in units of 50MHz */ /* static values from HW: RP0 > RP1 > RPn (min_freq) */ if (IS_GEN9_LP (i915)) { -u32 rp_state_cap =intel_uncore_read (uncore,BXT_RP_STATE_CAP ); - rps->rp0_freq = (rp_state_cap >>16 ) &0xff ; rps->rp1_freq = (rp_state_cap >>8 ) &0xff ; rps->min_freq = (rp_state_cap >>0 ) &0xff ; }else { -u32 rp_state_cap =intel_uncore_read (uncore,GEN6_RP_STATE_CAP ); - rps->rp0_freq = (rp_state_cap >>0 ) &0xff ; rps->rp1_freq = (rp_state_cap >>8 ) &0xff ; rps->min_freq = (rp_state_cap >>16 ) &0xff ;
@@ -1936,6 +1932,17 @@ u32 intel_rps_read_actual_frequency(struct intel_rps *rps)return freq; } +u32 intel_rps_read_state_cap (struct intel_rps *rps) +{ +struct drm_i915_private *i915 =rps_to_i915 (rps); +struct intel_uncore *uncore =rps_to_uncore (rps); + +if (IS_GEN9_LP (i915)) +return intel_uncore_read (uncore,BXT_RP_STATE_CAP ); +else +return intel_uncore_read (uncore,GEN6_RP_STATE_CAP ); +} +/* External interface for intel_ips.ko */ static struct drm_i915_private __rcu *ips_mchdev;
drivers/gpu/drm/i915/gt/intel_rps.h +1 -0
@@ -31,6 +31,7 @@ int intel_gpu_freq(struct intel_rps *rps, int val);int intel_freq_opcode (struct intel_rps *rps,int val);u32 intel_rps_get_cagf (struct intel_rps *rps,u32 rpstat1);u32 intel_rps_read_actual_frequency (struct intel_rps *rps); +u32 intel_rps_read_state_cap (struct intel_rps *rps);void gen5_rps_irq_handler (struct intel_rps *rps);void gen6_rps_irq_handler (struct intel_rps *rps,u32 pm_iir);
drivers/gpu/drm/i915/i915_debugfs.c +3 -5
@@ -420,13 +420,11 @@ static int i915_frequency_info(struct seq_file *m, void *unused)int max_freq; rp_state_limits =intel_uncore_read (&dev_priv->uncore,GEN6_RP_STATE_LIMITS ); -if (IS_GEN9_LP (dev_priv)) { - rp_state_cap =intel_uncore_read (&dev_priv->uncore,BXT_RP_STATE_CAP ); + rp_state_cap =intel_rps_read_state_cap (rps); +if (IS_GEN9_LP (dev_priv)) gt_perf_status =intel_uncore_read (&dev_priv->uncore,BXT_GT_PERF_STATUS ); - }else { - rp_state_cap =intel_uncore_read (&dev_priv->uncore,GEN6_RP_STATE_CAP ); +else gt_perf_status =intel_uncore_read (&dev_priv->uncore,GEN6_GT_PERF_STATUS ); - }/* RPSTAT1 is in the GT power well */ intel_uncore_forcewake_get (&dev_priv->uncore,FORCEWAKE_ALL );
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 14/30 drm/i915/xehpsdv: Read correct RP_STATE_CAP register
In reply to Matt RoperThe RP_STATE_CAP register is no longer part of the MCHBAR on XEHPSDV; this register is now a per-tile register at GTTMMADDR offset 0x250014.
--- drivers/gpu/drm/i915/gt/intel_rps.c | 4 +++- drivers/gpu/drm/i915/i915_reg.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_rps.c +3 -1
@@ -1937,7 +1937,9 @@ u32 intel_rps_read_state_cap(struct intel_rps *rps)struct drm_i915_private *i915 =rps_to_i915 (rps);struct intel_uncore *uncore =rps_to_uncore (rps); -if (IS_GEN9_LP (i915)) +if (IS_XEHPSDV (i915)) +return intel_uncore_read (uncore,XEHPSDV_RP_STATE_CAP ); +else if (IS_GEN9_LP (i915))return intel_uncore_read (uncore,BXT_RP_STATE_CAP );else return intel_uncore_read (uncore,GEN6_RP_STATE_CAP );
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -4110,6 +4110,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN6_RP_STATE_CAP _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5998)#define BXT_RP_STATE_CAP _MMIO(0x138170)#define GEN9_RP_STATE_LIMITS _MMIO(0x138148) +#define XEHPSDV_RP_STATE_CAP _MMIO(0x250014)/* * Logical Context regs
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 15/30 drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV
In reply to Matt RoperDG2 supports compute DSS and has the same maximum number of DSS and EU as XeHP SDV.
--- drivers/gpu/drm/i915/gt/intel_sseu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +1 -1
@@ -171,7 +171,7 @@ static void gen12_sseu_info_init(struct intel_gt *gt)* across the entire device. Then calculate out the DSS for each * workload type within that software slice. */ -if (IS_XEHPSDV (gt->i915)) { +if (IS_DG2 (gt->i915) ||IS_XEHPSDV (gt->i915)) {intel_sseu_set_info (sseu,1 ,32 ,16 ); sseu->has_compute_dss =1 ; }else {
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 16/30 drm/i915/dg2: Add forcewake table
In reply to Matt RoperThe DG2 forcewake table is very similar to the one used by XeHP SDV (and both platforms are even presented as a single table in the bspec). For the most part DG2 starts using a few additional ranges that were 'reserved' on XeHP SDV and stops using some others. However there is a single range (0xd800-0xd87f) that needs to be handled differently between the two platforms (it needs GT wake on XeHP SDV, but render wake on DG2) so unless we want to wake both domains (which could waste power) or define new types of forcewake domains for this special case we need to have separate tables for the two platforms. Let's define the ranges for both platforms with a parameterized macro so that we don't actually need to duplicate everything in the code.
It should be fine for DG2 to re-use the Xe_HP shadow register list so we can continue to use the 'xehpsdv' MMIO write functions and don't need to spin up a separate DG2 instance.
Bspec: 66534
--- drivers/gpu/drm/i915/intel_uncore.c | 305 +++++++++++++++------------- 1 file changed, 168 insertions(+), 137 deletions(-)
drivers/gpu/drm/i915/intel_uncore.c +168 -137
@@ -1317,143 +1317,170 @@ static const struct intel_forcewake_range __gen12_fw_ranges[] = {0x1d3f00 - 0x1d3fff: VD2 */ }; -/* *Must* be sorted by offset ranges! See intel_fw_table_check(). */ -static const struct intel_forcewake_range __xehp_fw_ranges[] = { -GEN_FW_RANGE (0x0 ,0x1fff ,0 ),/* -0x0 - 0xaff: reserved -0xb00 - 0x1fff: always on */ -GEN_FW_RANGE (0x2000 ,0x26ff ,FORCEWAKE_RENDER ), -GEN_FW_RANGE (0x2700 ,0x4aff ,FORCEWAKE_GT ), -GEN_FW_RANGE (0x4b00 ,0x51ff ,0 ),/* -0x4b00 - 0x4fff: reserved -0x5000 - 0x51ff: always on */ -GEN_FW_RANGE (0x5200 ,0x7fff ,FORCEWAKE_RENDER ), -GEN_FW_RANGE (0x8000 ,0x813f ,FORCEWAKE_GT ), -GEN_FW_RANGE (0x8140 ,0x815f ,FORCEWAKE_RENDER ), -GEN_FW_RANGE (0x8160 ,0x81ff ,0 ),/* -0x8160 - 0x817f: reserved -0x8180 - 0x81ff: always on */ -GEN_FW_RANGE (0x8200 ,0x82ff ,FORCEWAKE_GT ), -GEN_FW_RANGE (0x8300 ,0x84ff ,FORCEWAKE_RENDER ), -GEN_FW_RANGE (0x8500 ,0x94cf ,FORCEWAKE_GT ),/* -0x8500 - 0x87ff: gt -0x8800 - 0x8fff: reserved -0x9000 - 0x947f: gt -0x9480 - 0x94cf: reserved */ -GEN_FW_RANGE (0x94d0 ,0x955f ,FORCEWAKE_RENDER ), -GEN_FW_RANGE (0x9560 ,0x97ff ,0 ),/* -0x9560 - 0x95ff: always on -0x9600 - 0x97ff: reserved */ -GEN_FW_RANGE (0x9800 ,0xcfff ,FORCEWAKE_GT ),/* -0x9800 - 0xb4ff: gt -0xb500 - 0xbfff: reserved -0xc000 - 0xcfff: gt */ -GEN_FW_RANGE (0xd000 ,0xd7ff ,0 ), -GEN_FW_RANGE (0xd800 ,0xdbff ,FORCEWAKE_GT ), -GEN_FW_RANGE (0xdc00 ,0xdcff ,FORCEWAKE_RENDER ), -GEN_FW_RANGE (0xdd00 ,0xde7f ,FORCEWAKE_GT ),/* -0xdd00 - 0xddff: gt -0xde00 - 0xde7f: reserved */ -GEN_FW_RANGE (0xde80 ,0xe8ff ,FORCEWAKE_RENDER ),/* -0xde80 - 0xdfff: render -0xe000 - 0xe0ff: reserved -0xe100 - 0xe8ff: render */ -GEN_FW_RANGE (0xe900 ,0xffff ,FORCEWAKE_GT ),/* -0xe900 - 0xe9ff: gt -0xea00 - 0xefff: reserved -0xf000 - 0xffff: gt */ -GEN_FW_RANGE (0x10000 ,0x13fff ,0 ),/* -0x10000 - 0x11fff: reserved -0x12000 - 0x127ff: always on -0x12800 - 0x13fff: reserved */ -GEN_FW_RANGE (0x14000 ,0x141ff ,FORCEWAKE_MEDIA_VDBOX0 ), -GEN_FW_RANGE (0x14200 ,0x143ff ,FORCEWAKE_MEDIA_VDBOX2 ), -GEN_FW_RANGE (0x14400 ,0x145ff ,FORCEWAKE_MEDIA_VDBOX4 ), -GEN_FW_RANGE (0x14600 ,0x147ff ,FORCEWAKE_MEDIA_VDBOX6 ), -GEN_FW_RANGE (0x14800 ,0x1ffff ,FORCEWAKE_RENDER ),/* -0x14800 - 0x14fff: render -0x15000 - 0x16dff: reserved -0x16e00 - 0x1ffff: render */ -GEN_FW_RANGE (0x20000 ,0x21fff ,FORCEWAKE_MEDIA_VDBOX0 ),/* -0x20000 - 0x20fff: VD0 -0x21000 - 0x21fff: reserved */ -GEN_FW_RANGE (0x22000 ,0x23fff ,FORCEWAKE_GT ), -GEN_FW_RANGE (0x24000 ,0x2417f ,0 ),/* -0x24000 - 0x2407f: always on -0x24080 - 0x2417f: reserved */ -GEN_FW_RANGE (0x24180 ,0x249ff ,FORCEWAKE_GT ),/* -0x24180 - 0x241ff: gt -0x24200 - 0x249ff: reserved */ -GEN_FW_RANGE (0x24a00 ,0x251ff ,FORCEWAKE_RENDER ),/* -0x24a00 - 0x24a7f: render -0x24a80 - 0x251ff: reserved */ -GEN_FW_RANGE (0x25200 ,0x25fff ,FORCEWAKE_GT ),/* -0x25200 - 0x252ff: gt -0x25300 - 0x25fff: reserved */ -GEN_FW_RANGE (0x26000 ,0x2ffff ,FORCEWAKE_RENDER ),/* -0x26000 - 0x27fff: render -0x28000 - 0x29fff: reserved -0x2a000 - 0x2ffff: undocumented */ -GEN_FW_RANGE (0x30000 ,0x3ffff ,FORCEWAKE_GT ), -GEN_FW_RANGE (0x40000 ,0x1bffff ,0 ), -GEN_FW_RANGE (0x1c0000 ,0x1c3fff ,FORCEWAKE_MEDIA_VDBOX0 ),/* -0x1c0000 - 0x1c2bff: VD0 -0x1c2c00 - 0x1c2cff: reserved -0x1c2d00 - 0x1c2dff: VD0 -0x1c2e00 - 0x1c3eff: reserved -0x1c3f00 - 0x1c3fff: VD0 */ -GEN_FW_RANGE (0x1c4000 ,0x1c7fff ,FORCEWAKE_MEDIA_VDBOX1 ),/* -0x1c4000 - 0x1c6bff: VD1 -0x1c6c00 - 0x1c6cff: reserved -0x1c6d00 - 0x1c6dff: VD1 -0x1c6e00 - 0x1c7fff: reserved */ -GEN_FW_RANGE (0x1c8000 ,0x1cbfff ,FORCEWAKE_MEDIA_VEBOX0 ),/* -0x1c8000 - 0x1ca0ff: VE0 -0x1ca100 - 0x1cbfff: reserved */ -GEN_FW_RANGE (0x1cc000 ,0x1ccfff ,FORCEWAKE_MEDIA_VDBOX0 ), -GEN_FW_RANGE (0x1cd000 ,0x1cdfff ,FORCEWAKE_MEDIA_VDBOX2 ), -GEN_FW_RANGE (0x1ce000 ,0x1cefff ,FORCEWAKE_MEDIA_VDBOX4 ), -GEN_FW_RANGE (0x1cf000 ,0x1cffff ,FORCEWAKE_MEDIA_VDBOX6 ), -GEN_FW_RANGE (0x1d0000 ,0x1d3fff ,FORCEWAKE_MEDIA_VDBOX2 ),/* -0x1d0000 - 0x1d2bff: VD2 -0x1d2c00 - 0x1d2cff: reserved -0x1d2d00 - 0x1d2dff: VD2 -0x1d2e00 - 0x1d3eff: reserved -0x1d3f00 - 0x1d3fff: VD2 */ -GEN_FW_RANGE (0x1d4000 ,0x1d7fff ,FORCEWAKE_MEDIA_VDBOX3 ),/* -0x1d4000 - 0x1d6bff: VD3 -0x1d6c00 - 0x1d6cff: reserved -0x1d6d00 - 0x1d6dff: VD3 -0x1d6e00 - 0x1d7fff: reserved */ -GEN_FW_RANGE (0x1d8000 ,0x1dffff ,FORCEWAKE_MEDIA_VEBOX1 ),/* -0x1d8000 - 0x1da0ff: VE1 -0x1da100 - 0x1dffff: reserved */ -GEN_FW_RANGE (0x1e0000 ,0x1e3fff ,FORCEWAKE_MEDIA_VDBOX4 ),/* -0x1e0000 - 0x1e2bff: VD4 -0x1e2c00 - 0x1e2cff: reserved -0x1e2d00 - 0x1e2dff: VD4 -0x1e2e00 - 0x1e3eff: reserved -0x1e3f00 - 0x1e3fff: VD4 */ -GEN_FW_RANGE (0x1e4000 ,0x1e7fff ,FORCEWAKE_MEDIA_VDBOX5 ),/* -0x1e4000 - 0x1e6bff: VD5 -0x1e6c00 - 0x1e6cff: reserved -0x1e6d00 - 0x1e6dff: VD5 -0x1e6e00 - 0x1e7fff: reserved */ -GEN_FW_RANGE (0x1e8000 ,0x1effff ,FORCEWAKE_MEDIA_VEBOX2 ),/* -0x1e8000 - 0x1ea0ff: VE2 -0x1ea100 - 0x1effff: reserved */ -GEN_FW_RANGE (0x1f0000 ,0x1f3fff ,FORCEWAKE_MEDIA_VDBOX6 ),/* -0x1f0000 - 0x1f2bff: VD6 -0x1f2c00 - 0x1f2cff: reserved -0x1f2d00 - 0x1f2dff: VD6 -0x1f2e00 - 0x1f3eff: reserved -0x1f3f00 - 0x1f3fff: VD6 */ -GEN_FW_RANGE (0x1f4000 ,0x1f7fff ,FORCEWAKE_MEDIA_VDBOX7 ),/* -0x1f4000 - 0x1f6bff: VD7 -0x1f6c00 - 0x1f6cff: reserved -0x1f6d00 - 0x1f6dff: VD7 -0x1f6e00 - 0x1f7fff: reserved */ +/* +* Graphics IP version 12.55 brings a slight change to the 0xd800 range, +* switching it from the GT domain to the render domain. +* +* *Must* be sorted by offset ranges! See intel_fw_table_check(). +*/ +#define XEHP_FWRANGES (FW_RANGE_D800 ) \ + GEN_FW_RANGE(0x0, 0x1fff, 0),/* \ +0x0 - 0xaff: reserved \ +0xb00 - 0x1fff: always on */ \ +GEN_FW_RANGE (0x2000 ,0x26ff ,FORCEWAKE_RENDER ), \ +GEN_FW_RANGE (0x2700 ,0x4aff ,FORCEWAKE_GT ), \ +GEN_FW_RANGE (0x4b00 ,0x51ff ,0 ),/* \ +0x4b00 - 0x4fff: reserved \ +0x5000 - 0x51ff: always on */ \ +GEN_FW_RANGE (0x5200 ,0x7fff ,FORCEWAKE_RENDER ), \ +GEN_FW_RANGE (0x8000 ,0x813f ,FORCEWAKE_GT ), \ +GEN_FW_RANGE (0x8140 ,0x815f ,FORCEWAKE_RENDER ), \ +GEN_FW_RANGE (0x8160 ,0x81ff ,0 ),/* \ +0x8160 - 0x817f: reserved \ +0x8180 - 0x81ff: always on */ \ +GEN_FW_RANGE (0x8200 ,0x82ff ,FORCEWAKE_GT ), \ +GEN_FW_RANGE (0x8300 ,0x84ff ,FORCEWAKE_RENDER ), \ +GEN_FW_RANGE (0x8500 ,0x8cff ,FORCEWAKE_GT ),/* \ +0x8500 - 0x87ff: gt \ +0x8800 - 0x8c7f: reserved \ +0x8c80 - 0x8cff: gt (DG2 only) */ \ +GEN_FW_RANGE (0x8d00 ,0x8fff ,FORCEWAKE_RENDER ),/* \ +0x8d00 - 0x8dff: render (DG2 only) \ +0x8e00 - 0x8fff: reserved */ \ +GEN_FW_RANGE (0x9000 ,0x94cf ,FORCEWAKE_GT ),/* \ +0x9000 - 0x947f: gt \ +0x9480 - 0x94cf: reserved */ \ +GEN_FW_RANGE (0x94d0 ,0x955f ,FORCEWAKE_RENDER ), \ +GEN_FW_RANGE (0x9560 ,0x967f ,0 ),/* \ +0x9560 - 0x95ff: always on \ +0x9600 - 0x967f: reserved */ \ +GEN_FW_RANGE (0x9680 ,0x97ff ,FORCEWAKE_RENDER ),/* \ +0x9680 - 0x96ff: render (DG2 only) \ +0x9700 - 0x97ff: reserved */ \ +GEN_FW_RANGE (0x9800 ,0xcfff ,FORCEWAKE_GT ),/* \ +0x9800 - 0xb4ff: gt \ +0xb500 - 0xbfff: reserved \ +0xc000 - 0xcfff: gt */ \ +GEN_FW_RANGE (0xd000 ,0xd7ff ,0 ), \ +GEN_FW_RANGE (0xd800 ,0xd87f ,FW_RANGE_D800 ), \ +GEN_FW_RANGE (0xd880 ,0xdbff ,FORCEWAKE_GT ), \ +GEN_FW_RANGE (0xdc00 ,0xdcff ,FORCEWAKE_RENDER ), \ +GEN_FW_RANGE (0xdd00 ,0xde7f ,FORCEWAKE_GT ),/* \ +0xdd00 - 0xddff: gt \ +0xde00 - 0xde7f: reserved */ \ +GEN_FW_RANGE (0xde80 ,0xe8ff ,FORCEWAKE_RENDER ),/* \ +0xde80 - 0xdfff: render \ +0xe000 - 0xe0ff: reserved \ +0xe100 - 0xe8ff: render */ \ +GEN_FW_RANGE (0xe900 ,0xffff ,FORCEWAKE_GT ),/* \ +0xe900 - 0xe9ff: gt \ +0xea00 - 0xefff: reserved \ +0xf000 - 0xffff: gt */ \ +GEN_FW_RANGE (0x10000 ,0x12fff ,0 ),/* \ +0x10000 - 0x11fff: reserved \ +0x12000 - 0x127ff: always on \ +0x12800 - 0x12fff: reserved */ \ +GEN_FW_RANGE (0x13000 ,0x131ff ,FORCEWAKE_MEDIA_VDBOX0 ),/* DG2 only */ \ +GEN_FW_RANGE (0x13200 ,0x13fff ,FORCEWAKE_MEDIA_VDBOX2 ),/* \ +0x13200 - 0x133ff: VD2 (DG2 only) \ +0x13400 - 0x13fff: reserved */ \ +GEN_FW_RANGE (0x14000 ,0x141ff ,FORCEWAKE_MEDIA_VDBOX0 ),/* XEHPSDV only */ \ +GEN_FW_RANGE (0x14200 ,0x143ff ,FORCEWAKE_MEDIA_VDBOX2 ),/* XEHPSDV only */ \ +GEN_FW_RANGE (0x14400 ,0x145ff ,FORCEWAKE_MEDIA_VDBOX4 ),/* XEHPSDV only */ \ +GEN_FW_RANGE (0x14600 ,0x147ff ,FORCEWAKE_MEDIA_VDBOX6 ),/* XEHPSDV only */ \ +GEN_FW_RANGE (0x14800 ,0x14fff ,FORCEWAKE_RENDER ), \ +GEN_FW_RANGE (0x15000 ,0x16dff ,FORCEWAKE_GT ),/* \ +0x15000 - 0x15fff: gt (DG2 only) \ +0x16000 - 0x16dff: reserved */ \ +GEN_FW_RANGE (0x16e00 ,0x1ffff ,FORCEWAKE_RENDER ), \ +GEN_FW_RANGE (0x20000 ,0x21fff ,FORCEWAKE_MEDIA_VDBOX0 ),/* \ +0x20000 - 0x20fff: VD0 (XEHPSDV only) \ +0x21000 - 0x21fff: reserved */ \ +GEN_FW_RANGE (0x22000 ,0x23fff ,FORCEWAKE_GT ), \ +GEN_FW_RANGE (0x24000 ,0x2417f ,0 ),/* \ +0x24000 - 0x2407f: always on \ +0x24080 - 0x2417f: reserved */ \ +GEN_FW_RANGE (0x24180 ,0x249ff ,FORCEWAKE_GT ),/* \ +0x24180 - 0x241ff: gt \ +0x24200 - 0x249ff: reserved */ \ +GEN_FW_RANGE (0x24a00 ,0x251ff ,FORCEWAKE_RENDER ),/* \ +0x24a00 - 0x24a7f: render \ +0x24a80 - 0x251ff: reserved */ \ +GEN_FW_RANGE (0x25200 ,0x25fff ,FORCEWAKE_GT ),/* \ +0x25200 - 0x252ff: gt \ +0x25300 - 0x25fff: reserved */ \ +GEN_FW_RANGE (0x26000 ,0x2ffff ,FORCEWAKE_RENDER ),/* \ +0x26000 - 0x27fff: render \ +0x28000 - 0x29fff: reserved \ +0x2a000 - 0x2ffff: undocumented */ \ +GEN_FW_RANGE (0x30000 ,0x3ffff ,FORCEWAKE_GT ), \ +GEN_FW_RANGE (0x40000 ,0x1bffff ,0 ), \ +GEN_FW_RANGE (0x1c0000 ,0x1c3fff ,FORCEWAKE_MEDIA_VDBOX0 ),/* \ +0x1c0000 - 0x1c2bff: VD0 \ +0x1c2c00 - 0x1c2cff: reserved \ +0x1c2d00 - 0x1c2dff: VD0 \ +0x1c2e00 - 0x1c3eff: VD0 (DG2 only) \ +0x1c3f00 - 0x1c3fff: VD0 */ \ +GEN_FW_RANGE (0x1c4000 ,0x1c7fff ,FORCEWAKE_MEDIA_VDBOX1 ),/* \ +0x1c4000 - 0x1c6bff: VD1 \ +0x1c6c00 - 0x1c6cff: reserved \ +0x1c6d00 - 0x1c6dff: VD1 \ +0x1c6e00 - 0x1c7fff: reserved */ \ +GEN_FW_RANGE (0x1c8000 ,0x1cbfff ,FORCEWAKE_MEDIA_VEBOX0 ),/* \ +0x1c8000 - 0x1ca0ff: VE0 \ +0x1ca100 - 0x1cbfff: reserved */ \ +GEN_FW_RANGE (0x1cc000 ,0x1ccfff ,FORCEWAKE_MEDIA_VDBOX0 ), \ +GEN_FW_RANGE (0x1cd000 ,0x1cdfff ,FORCEWAKE_MEDIA_VDBOX2 ), \ +GEN_FW_RANGE (0x1ce000 ,0x1cefff ,FORCEWAKE_MEDIA_VDBOX4 ), \ +GEN_FW_RANGE (0x1cf000 ,0x1cffff ,FORCEWAKE_MEDIA_VDBOX6 ), \ +GEN_FW_RANGE (0x1d0000 ,0x1d3fff ,FORCEWAKE_MEDIA_VDBOX2 ),/* \ +0x1d0000 - 0x1d2bff: VD2 \ +0x1d2c00 - 0x1d2cff: reserved \ +0x1d2d00 - 0x1d2dff: VD2 \ +0x1d2e00 - 0x1d3dff: VD2 (DG2 only) \ +0x1d3e00 - 0x1d3eff: reserved \ +0x1d3f00 - 0x1d3fff: VD2 */ \ +GEN_FW_RANGE (0x1d4000 ,0x1d7fff ,FORCEWAKE_MEDIA_VDBOX3 ),/* \ +0x1d4000 - 0x1d6bff: VD3 \ +0x1d6c00 - 0x1d6cff: reserved \ +0x1d6d00 - 0x1d6dff: VD3 \ +0x1d6e00 - 0x1d7fff: reserved */ \ +GEN_FW_RANGE (0x1d8000 ,0x1dffff ,FORCEWAKE_MEDIA_VEBOX1 ),/* \ +0x1d8000 - 0x1da0ff: VE1 \ +0x1da100 - 0x1dffff: reserved */ \ +GEN_FW_RANGE (0x1e0000 ,0x1e3fff ,FORCEWAKE_MEDIA_VDBOX4 ),/* \ +0x1e0000 - 0x1e2bff: VD4 \ +0x1e2c00 - 0x1e2cff: reserved \ +0x1e2d00 - 0x1e2dff: VD4 \ +0x1e2e00 - 0x1e3eff: reserved \ +0x1e3f00 - 0x1e3fff: VD4 */ \ +GEN_FW_RANGE (0x1e4000 ,0x1e7fff ,FORCEWAKE_MEDIA_VDBOX5 ),/* \ +0x1e4000 - 0x1e6bff: VD5 \ +0x1e6c00 - 0x1e6cff: reserved \ +0x1e6d00 - 0x1e6dff: VD5 \ +0x1e6e00 - 0x1e7fff: reserved */ \ +GEN_FW_RANGE (0x1e8000 ,0x1effff ,FORCEWAKE_MEDIA_VEBOX2 ),/* \ +0x1e8000 - 0x1ea0ff: VE2 \ +0x1ea100 - 0x1effff: reserved */ \ +GEN_FW_RANGE (0x1f0000 ,0x1f3fff ,FORCEWAKE_MEDIA_VDBOX6 ),/* \ +0x1f0000 - 0x1f2bff: VD6 \ +0x1f2c00 - 0x1f2cff: reserved \ +0x1f2d00 - 0x1f2dff: VD6 \ +0x1f2e00 - 0x1f3eff: reserved \ +0x1f3f00 - 0x1f3fff: VD6 */ \ +GEN_FW_RANGE (0x1f4000 ,0x1f7fff ,FORCEWAKE_MEDIA_VDBOX7 ),/* \ +0x1f4000 - 0x1f6bff: VD7 \ +0x1f6c00 - 0x1f6cff: reserved \ +0x1f6d00 - 0x1f6dff: VD7 \ +0x1f6e00 - 0x1f7fff: reserved */ \GEN_FW_RANGE (0x1f8000 ,0x1fa0ff ,FORCEWAKE_MEDIA_VEBOX3 ), + +static const struct intel_forcewake_range __xehp_fw_ranges[] = { +XEHP_FWRANGES (FORCEWAKE_GT ) +}; + +static const struct intel_forcewake_range __dg2_fw_ranges[] = { +XEHP_FWRANGES (FORCEWAKE_RENDER ) }; static void
@@ -2084,7 +2111,11 @@ static int uncore_forcewake_init(struct intel_uncore *uncore)return ret;forcewake_early_sanitize (uncore,0 ); -if (GRAPHICS_VER_FULL (i915) >=IP_VER (12 ,50 )) { +if (GRAPHICS_VER_FULL (i915) >=IP_VER (12 ,55 )) { +ASSIGN_FW_DOMAINS_TABLE (uncore, __dg2_fw_ranges); +ASSIGN_WRITE_MMIO_VFUNCS (uncore, xehp_fwtable); +ASSIGN_READ_MMIO_VFUNCS (uncore, gen11_fwtable); + }else if (GRAPHICS_VER_FULL (i915) >=IP_VER (12 ,50 )) {ASSIGN_FW_DOMAINS_TABLE (uncore, __xehp_fw_ranges);ASSIGN_WRITE_MMIO_VFUNCS (uncore, xehp_fwtable);ASSIGN_READ_MMIO_VFUNCS (uncore, gen11_fwtable);
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 17/30 drm/i915/dg2: Update LNCF steering ranges
In reply to Matt RoperDG2's replicated register ranges are almost the same at XeHP SDV with the exception of one LNCF sub-range that switches to gslice steering. We can re-use the XeHP SDV mslice steering table and just provide a DG2-specific LNCF steering table.
Bspec: 66534
--- drivers/gpu/drm/i915/gt/intel_gt.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_gt.c +10 -1
@@ -103,6 +103,12 @@ static const struct intel_mmio_range xehpsdv_lncf_steering_table[] = { {}, }; +static const struct intel_mmio_range dg2_lncf_steering_table[] = { + {0x00B000 ,0x00B0FF }, + {0x00D880 ,0x00D8FF }, + {}, +}; +static u16 slicemask (struct intel_gt *gt,int count) {u64 dss_mask =intel_sseu_get_subslices (>->info.sseu,0 );
@@ -127,7 +133,10 @@ int intel_gt_init_mmio(struct intel_gt *gt) (intel_uncore_read (gt->uncore,GEN10_MIRROR_FUSE3 ) &GEN12_MEML3_EN_MASK ); -if (IS_XEHPSDV (gt->i915)) { +if (IS_DG2 (gt->i915)) { + gt->steering_table[MSLICE ] = xehpsdv_mslice_steering_table; + gt->steering_table[LNCF ] = dg2_lncf_steering_table; + }else if (IS_XEHPSDV (gt->i915)) { gt->steering_table[MSLICE ] = xehpsdv_mslice_steering_table; gt->steering_table[LNCF ] = xehpsdv_lncf_steering_table; } else if (GRAPHICS_VER(gt->i915) >= 11 &&
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 18/30 drm/i915/dg2: Add SQIDI steering
In reply to Matt RoperAlthough DG2_G10 platforms will always have all SQIDI's present and don't need steering for registers in a SQIDI MMIO range, this isn't true for DG2_G11 platforms; only SQIDI's 2 and 3 can be used on those.
We handle SQIDI ranges a bit differently from other types of explicit steering. The SQIDI ranges belong to either the MCFG unit or the SF unit, both of which have their own dedicated steering registers and do not use the typical 0xFDC steering control that all other types of ranges use. Thus we only need to worry about picking a valid initial value for the MCFG and SF steering registers (0xFD0 and 0xFD8 resepectively) at driver init; they won't change after we set them up so we don't need to worry about re-steering them explicitly at runtime.
Given that any SQIDI value should work fine for DG2-G10 and XeHP SDV, while only values of 2 and 3 are valid for DG2-G11, we'll just initialize the MCFG and SF steering registers to a constant value of "2" for all XeHP-based platforms for simplicity --- that will work in all cases.
Bspec: 66534
--- drivers/gpu/drm/i915/gt/intel_workarounds.c | 28 +++++++++++++++++---- drivers/gpu/drm/i915/i915_reg.h | 2 ++ 2 files changed, 25 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/gt/intel_workarounds.c +23 -5
@@ -888,17 +888,24 @@ cfl_gt_workarounds_init(struct drm_i915_private *i915, struct i915_wa_list *wal) GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS); } -static void __add_mcr_wa (struct drm_i915_private *i915,struct i915_wa_list *wal, -unsigned slice,unsigned subslice) +static void __set_mcr_steering (struct i915_wa_list *wal, +i915_reg_t steering_reg, +unsigned int slice,unsigned int subslice) {u32 mcr, mcr_mask; mcr =GEN11_MCR_SLICE (slice) |GEN11_MCR_SUBSLICE (subslice); mcr_mask =GEN11_MCR_SLICE_MASK |GEN11_MCR_SUBSLICE_MASK ; -drm_dbg (&i915->drm,"MCR slice/subslice = %x\n" , mcr); +wa_write_clr_set (wal, steering_reg, mcr_mask, mcr); +} + +static void __add_mcr_wa (struct drm_i915_private *i915,struct i915_wa_list *wal, +unsigned int slice,unsigned int subslice) +{ +drm_dbg (&i915->drm,"MCR slice=0x%x, subslice=0x%x\n" , slice, subslice); -wa_write_clr_set (wal,GEN8_MCR_SELECTOR , mcr_mask, mcr); +__set_mcr_steering (wal,GEN8_MCR_SELECTOR , slice, subslice); } static void
@@ -952,7 +959,6 @@ xehp_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal)* - L3 Bank (fusable) * - MSLICE (fusable) * - LNCF (sub-unit within mslice; always present if mslice is present) -* - SQIDI (always on) * * We'll do our default/implicit steering based on GSLICE (in the * sliceid field) and DSS (in the subsliceid field). If we can
@@ -1002,6 +1008,18 @@ xehp_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal)WARN_ON (dss_mask >> (slice *GEN_DSS_PER_GSLICE ) ==0 );__add_mcr_wa (i915, wal, slice, subslice); + +/* +* SQIDI ranges are special because they use different steering +* registers than everything else we work with. On XeHP SDV and +* DG2-G10, any value in the steering registers will work fine since +* all instances are present, but DG2-G11 only has SQIDI instances at +* ID's 2 and 3, so we need to steer to one of those. For simplicity +* we'll just steer to a hardcoded "2" since that value will work +* everywhere. +*/ +__set_mcr_steering (wal,MCFG_MCR_SELECTOR ,0 ,2 ); +__set_mcr_steering (wal,SF_MCR_SELECTOR ,0 ,2 ); } static void
drivers/gpu/drm/i915/i915_reg.h +2 -0
@@ -2686,6 +2686,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN12_SC_INSTDONE_EXTRA2 _MMIO(0x7108)#define GEN7_SAMPLER_INSTDONE _MMIO(0xe160)#define GEN7_ROW_INSTDONE _MMIO(0xe164) +#define MCFG_MCR_SELECTOR _MMIO(0xfd0) +#define SF_MCR_SELECTOR _MMIO(0xfd8)#define GEN8_MCR_SELECTOR _MMIO(0xfdc)#define GEN8_MCR_SLICE (slice) (((slice) & 3) << 26)#define GEN8_MCR_SLICE_MASK GEN8_MCR_SLICE(3)
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 19/30 drm/i915/dg2: Add new LRI reg offsets
In reply to Matt RoperFrom: Akeem G Abodunrin <[email protected]>
New LRI register offsets were introduced for DG2, this patch adds those extra registers, and create new register table for setting offsets to compare with HW generated context image - especially for gt_lrc test. Also updates general purpose register with scratch offset for DG2, in order to use it for live_lrc_fixed selftest.
--- drivers/gpu/drm/i915/gt/intel_lrc.c | 85 ++++++++++++++++++++++++++++- 1 file changed, 83 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/gt/intel_lrc.c +83 -2
@@ -226,6 +226,40 @@ static const u8 gen12_xcs_offsets[] = {END }; +static const u8 dg2_xcs_offsets[] = { +NOP (1 ), +LRI (15 ,POSTED ), +REG16 (0x244 ), +REG (0x034 ), +REG (0x030 ), +REG (0x038 ), +REG (0x03c ), +REG (0x168 ), +REG (0x140 ), +REG (0x110 ), +REG (0x1c0 ), +REG (0x1c4 ), +REG (0x1c8 ), +REG (0x180 ), +REG16 (0x2b4 ), +REG (0x120 ), +REG (0x124 ), + +NOP (1 ), +LRI (9 ,POSTED ), +REG16 (0x3a8 ), +REG16 (0x28c ), +REG16 (0x288 ), +REG16 (0x284 ), +REG16 (0x280 ), +REG16 (0x27c ), +REG16 (0x278 ), +REG16 (0x274 ), +REG16 (0x270 ), + +END +}; +static const u8 gen8_rcs_offsets[] = {NOP (1 ),LRI (14 ,POSTED ),
@@ -525,6 +559,49 @@ static const u8 xehp_rcs_offsets[] = { END }; +static const u8 dg2_rcs_offsets[] = { +NOP (1 ), +LRI (15 ,POSTED ), +REG16 (0x244 ), +REG (0x034 ), +REG (0x030 ), +REG (0x038 ), +REG (0x03c ), +REG (0x168 ), +REG (0x140 ), +REG (0x110 ), +REG (0x1c0 ), +REG (0x1c4 ), +REG (0x1c8 ), +REG (0x180 ), +REG16 (0x2b4 ), +REG (0x120 ), +REG (0x124 ), + +NOP (1 ), +LRI (9 ,POSTED ), +REG16 (0x3a8 ), +REG16 (0x28c ), +REG16 (0x288 ), +REG16 (0x284 ), +REG16 (0x280 ), +REG16 (0x27c ), +REG16 (0x278 ), +REG16 (0x274 ), +REG16 (0x270 ), + +LRI (3 ,POSTED ), +REG (0x1b0 ), +REG16 (0x5a8 ), +REG16 (0x5ac ), + +NOP (6 ), +LRI (1 ,0 ), +REG (0x0c8 ), + +END +}; +#undef END#undef REG16#undef REG
@@ -543,7 +620,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine) !intel_engine_has_relative_mmio(engine));if (engine->class ==RENDER_CLASS ) { -if (GRAPHICS_VER_FULL (engine->i915) >=IP_VER (12 ,50 )) +if (GRAPHICS_VER_FULL (engine->i915) >=IP_VER (12 ,55 )) +return dg2_rcs_offsets; +else if (GRAPHICS_VER_FULL (engine->i915) >=IP_VER (12 ,50 ))return xehp_rcs_offsets;else if (GRAPHICS_VER (engine->i915) >=12 )return gen12_rcs_offsets;
@@ -554,7 +633,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)else return gen8_rcs_offsets; }else { -if (GRAPHICS_VER (engine->i915) >=12 ) +if (GRAPHICS_VER_FULL (engine->i915) >=IP_VER (12 ,55 )) +return dg2_xcs_offsets; +else if (GRAPHICS_VER (engine->i915) >=12 )return gen12_xcs_offsets;else if (GRAPHICS_VER (engine->i915) >=9 )return gen9_xcs_offsets;
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 20/30 drm/i915/dg2: Maintain backward-compatible nested batch behavior
In reply to Matt RoperFor tgl+, the per-context setting of MI_MODE[12] determines whether the bits of a nested MI_BATCH_BUFFER_START instruction should be interpreted in the traditional manner or whether they should instead use a new tgl+ meaning that breaks backward compatibility, but allows nesting into 3rd-level batchbuffers. For previous platforms, the hardware default for this register bit is to maintain backward-compatible behavior unless a context intentionally opts into the new behavior; however Xe_HPG flips the hardware default behavior.
From a SW perspective, we want to maintain the backward-compatible behavior for userspace, so we'll apply a fake workaround to set it back to the legacy behavior on platforms where the hardware default is to break compatibility. At the moment there is no Linux userspace that utilizes third-level batchbuffers, so this will avoid userspace from needing to make any changes. using the legacy meaning is the correct thing to do. If/when we have userspace consumers that want to utilize third-level batch nesting, we can provide a context parameter to allow them to opt-in.
Bspec: 45974, 45718
--- drivers/gpu/drm/i915/gt/intel_workarounds.c | 39 +++++++++++++++++++-- drivers/gpu/drm/i915/i915_reg.h | 1 + 2 files changed, 38 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/gt/intel_workarounds.c +37 -2
@@ -643,6 +643,37 @@ static void dg1_ctx_workarounds_init(struct intel_engine_cs *engine, DG1_HZ_READ_SUPPRESSION_OPTIMIZATION_DISABLE); } +static void fakewa_disable_nestedbb_mode (struct intel_engine_cs *engine, +struct i915_wa_list *wal) +{ +/* +* This is a "fake" workaround defined by software to ensure we +* maintain reliable, backward-compatible behavior for userspace with +* regards to how nested MI_BATCH_BUFFER_START commands are handled. +* +* The per-context setting of MI_MODE[12] determines whether the bits +* of a nested MI_BATCH_BUFFER_START instruction should be interpreted +* in the traditional manner or whether they should instead use a new +* tgl+ meaning that breaks backward compatibility, but allows nesting +* into 3rd-level batchbuffers. When this new capability was first +* added in TGL, it remained off by default unless a context +* intentionally opted in to the new behavior. However Xe_HPG now +* flips this on by default and requires that we explicitly opt out if +* we don't want the new behavior. +* +* From a SW perspective, we want to maintain the backward-compatible +* behavior for userspace, so we'll apply a fake workaround to set it +* back to the legacy behavior on platforms where the hardware default +* is to break compatibility. At the moment there is no Linux +* userspace that utilizes third-level batchbuffers, so this will avoid +* userspace from needing to make any changes. using the legacy +* meaning is the correct thing to do. If/when we have userspace +* consumers that want to utilize third-level batch nesting, we can +* provide a context parameter to allow them to opt-in. +*/ +wa_masked_dis (wal,RING_MI_MODE (engine->mmio_base),TGL_NESTED_BB_EN ); +} + static void __intel_engine_init_ctx_wa(struct intel_engine_cs *engine, struct i915_wa_list *wal,
@@ -650,11 +681,15 @@ __intel_engine_init_ctx_wa(struct intel_engine_cs *engine, {struct drm_i915_private *i915 = engine->i915; +wa_init_start (wal, name, engine->name); + +/* Applies to all engines */ +if (GRAPHICS_VER_FULL (i915) >=IP_VER (12 ,55 )) +fakewa_disable_nestedbb_mode (engine, wal); +if (engine->class !=RENDER_CLASS )return ; -wa_init_start (wal, name, engine->name); -if (IS_DG1 (i915))dg1_ctx_workarounds_init (engine, wal);else if (GRAPHICS_VER (i915) ==12 )
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -2821,6 +2821,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define MI_MODE _MMIO(0x209c)# define VS_TIMER_DISPATCH (1 << 6)# define MI_FLUSH_ENABLE (1 << 12) +# define TGL_NESTED_BB_EN (1 << 12)# define ASYNC_FLIP_PERF_DISABLE (1 << 14)# define MODE_IDLE (1 << 9)# define STOP_RING (1 << 8)
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 21/30 drm/i915/dg2: Report INSTDONE_GEOM values in error state
In reply to Matt RoperXe_HPG adds some additional INSTDONE_GEOM debug registers; the Mesa team has indicated that having these reported in the error state would be useful for debugging GPU hangs. These registers are replicated per-DSS with gslice steering.
--- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 7 +++++++ drivers/gpu/drm/i915/gt/intel_engine_types.h | 3 +++ drivers/gpu/drm/i915/i915_gpu_error.c | 10 ++++++++-- drivers/gpu/drm/i915/i915_reg.h | 1 + 4 files changed, 19 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/gt/intel_engine_cs.c +7 -0
@@ -1211,6 +1211,13 @@ void intel_engine_get_instdone(const struct intel_engine_cs *engine, GEN7_ROW_INSTDONE); } } + +if (GRAPHICS_VER_FULL (i915) >=IP_VER (12 ,55 )) { +for_each_instdone_gslice_dss_xehp (i915, sseu, iter, slice, subslice) + instdone->geom_svg[slice][subslice] = +read_subslice_reg (engine, slice, subslice, +XEHPG_INSTDONE_GEOM_SVG ); + } }else if (GRAPHICS_VER (i915) >=7 ) { instdone->instdone =intel_uncore_read (uncore,RING_INSTDONE (mmio_base));
drivers/gpu/drm/i915/gt/intel_engine_types.h +3 -0
@@ -76,6 +76,9 @@ struct intel_instdone {u32 slice_common_extra[2 ];u32 sampler[GEN_MAX_GSLICES ][I915_MAX_SUBSLICES ];u32 row[GEN_MAX_GSLICES ][I915_MAX_SUBSLICES ]; + +/* Added in XeHPG */ +u32 geom_svg[GEN_MAX_GSLICES ][I915_MAX_SUBSLICES ]; };/*
drivers/gpu/drm/i915/i915_gpu_error.c +8 -2
@@ -431,6 +431,7 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,const struct sseu_dev_info *sseu = &ee->engine->gt->info.sseu;int slice;int subslice; +int iter;err_printf (m," INSTDONE: 0x%08x\n" , ee->instdone.instdone);
@@ -445,8 +446,6 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,return ;if (GRAPHICS_VER_FULL (m->i915) >=IP_VER (12 ,50 )) { -int iter; -for_each_instdone_gslice_dss_xehp (m->i915, sseu, iter, slice, subslice) err_printf(m, " SAMPLER_INSTDONE[%d][%d]: 0x%08x\n", slice, subslice,
@@ -471,6 +470,13 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,if (GRAPHICS_VER (m->i915) <12 )return ; +if (GRAPHICS_VER_FULL (m->i915) >=IP_VER (12 ,55 )) { +for_each_instdone_gslice_dss_xehp (m->i915, sseu, iter, slice, subslice) +err_printf (m," GEOM_SVGUNIT_INSTDONE[%d][%d]: 0x%08x\n" , + slice, subslice, + ee->instdone.geom_svg[slice][subslice]); + } +err_printf (m," SC_INSTDONE_EXTRA: 0x%08x\n" , ee->instdone.slice_common_extra[0 ]); err_printf(m, " SC_INSTDONE_EXTRA2: 0x%08x\n",
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -2686,6 +2686,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN12_SC_INSTDONE_EXTRA2 _MMIO(0x7108)#define GEN7_SAMPLER_INSTDONE _MMIO(0xe160)#define GEN7_ROW_INSTDONE _MMIO(0xe164) +#define XEHPG_INSTDONE_GEOM_SVG _MMIO(0x666c)#define MCFG_MCR_SELECTOR _MMIO(0xfd0)#define SF_MCR_SELECTOR _MMIO(0xfd8)#define GEN8_MCR_SELECTOR _MMIO(0xfdc)
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v3 21/30] drm/i915/dg2: Report INSTDONE_GEOM values in error state
Quoted 8 lines · Matt Roper
Xe_HPGadds some additionalINSTDONE_GEOMdebug registers; the Mesa team has indicated that having these reported in the error state would be useful for debugging GPU hangs. These registers are replicated per-DSS with gslice steering.Cc Lionel Landwerlin <[email protected]>Signed-off-by Matt Roper <[email protected]>
Quoted 93 lines
--- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 7 +++++++ drivers/gpu/drm/i915/gt/intel_engine_types.h | 3 +++ drivers/gpu/drm/i915/i915_gpu_error.c | 10 ++++++++-- drivers/gpu/drm/i915/i915_reg.h | 1 + 4 files changed, 19 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/gt/intel_engine_cs.c +7
-0@@ -1211,6 +1211,13 @@ void intel_engine_get_instdone(const struct intel_engine_cs *engine, GEN7_ROW_INSTDONE); } } + +if (GRAPHICS_VER_FULL (i915) >=IP_VER (12 ,55 )) { +for_each_instdone_gslice_dss_xehp (i915, sseu, iter, slice, subslice) + instdone->geom_svg[slice][subslice] = +read_subslice_reg (engine, slice, subslice, +XEHPG_INSTDONE_GEOM_SVG ); + } }else if (GRAPHICS_VER (i915) >=7 ) { instdone->instdone =intel_uncore_read (uncore,RING_INSTDONE (mmio_base));drivers/gpu/drm/i915/gt/intel_engine_types.h +3
-0@@ -76,6 +76,9 @@ struct intel_instdone {u32 slice_common_extra[2 ];u32 sampler[GEN_MAX_GSLICES ][I915_MAX_SUBSLICES ];u32 row[GEN_MAX_GSLICES ][I915_MAX_SUBSLICES ]; + +/* Added in XeHPG */ +u32 geom_svg[GEN_MAX_GSLICES ][I915_MAX_SUBSLICES ]; };/* drivers/gpu/drm/i915/i915_gpu_error.c +8
-2@@ -431,6 +431,7 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,const struct sseu_dev_info *sseu = &ee->engine->gt->info.sseu;int slice;int subslice; +int iter;err_printf (m," INSTDONE: 0x%08x\n" , ee->instdone.instdone);@@ -445,8 +446,6 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,return ;if (GRAPHICS_VER_FULL (m->i915) >=IP_VER (12 ,50 )) { -int iter; -for_each_instdone_gslice_dss_xehp (m->i915, sseu, iter, slice, subslice) err_printf(m, " SAMPLER_INSTDONE[%d][%d]: 0x%08x\n", slice, subslice,@@ -471,6 +470,13 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,if (GRAPHICS_VER (m->i915) <12 )return ; +if (GRAPHICS_VER_FULL (m->i915) >=IP_VER (12 ,55 )) { +for_each_instdone_gslice_dss_xehp (m->i915, sseu, iter, slice, subslice) +err_printf (m," GEOM_SVGUNIT_INSTDONE[%d][%d]: 0x%08x\n" , + slice, subslice, + ee->instdone.geom_svg[slice][subslice]); + } +err_printf (m," SC_INSTDONE_EXTRA: 0x%08x\n" , ee->instdone.slice_common_extra[0 ]); err_printf(m, " SC_INSTDONE_EXTRA2: 0x%08x\n",drivers/gpu/drm/i915/i915_reg.h +1
-0@@ -2686,6 +2686,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN12_SC_INSTDONE_EXTRA2 _MMIO(0x7108)#define GEN7_SAMPLER_INSTDONE _MMIO(0xe160)#define GEN7_ROW_INSTDONE _MMIO(0xe164) +#define XEHPG_INSTDONE_GEOM_SVG _MMIO(0x666c)#define MCFG_MCR_SELECTOR _MMIO(0xfd0)#define SF_MCR_SELECTOR _MMIO(0xfd8)#define GEN8_MCR_SELECTOR _MMIO(0xfdc)Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 22/30 drm/i915/dg2: Define MOCS table for DG2
In reply to Matt RoperBspec: 45101, 45427
--- drivers/gpu/drm/i915/gt/intel_mocs.c | 35 +++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_mocs.c +34 -1
@@ -341,6 +341,30 @@ static const struct drm_i915_mocs_entry xehpsdv_mocs_table[] = { MOCS_ENTRY(63, 0, L3_1_UC), }; +static const struct drm_i915_mocs_entry dg2_mocs_table[] = { +/* UC - Coherent; GO:L3 */ +MOCS_ENTRY (0 ,0 ,L3_1_UC |L3_LKUP (1 )), +/* UC - Coherent; GO:Memory */ +MOCS_ENTRY (1 ,0 ,L3_1_UC |L3_GLBGO (1 ) |L3_LKUP (1 )), +/* UC - Non-Coherent; GO:Memory */ +MOCS_ENTRY (2 ,0 ,L3_1_UC |L3_GLBGO (1 )), + +/* WB - LC */ +MOCS_ENTRY (3 ,0 ,L3_3_WB |L3_LKUP (1 )), +}; + +static const struct drm_i915_mocs_entry dg2_mocs_table_g10_ax[] = { +/* Wa_14011441408: Set Go to Memory for MOCS#0 */ +MOCS_ENTRY (0 ,0 ,L3_1_UC |L3_GLBGO (1 ) |L3_LKUP (1 )), +/* UC - Coherent; GO:Memory */ +MOCS_ENTRY (1 ,0 ,L3_1_UC |L3_GLBGO (1 ) |L3_LKUP (1 )), +/* UC - Non-Coherent; GO:Memory */ +MOCS_ENTRY (2 ,0 ,L3_1_UC |L3_GLBGO (1 )), + +/* WB - LC */ +MOCS_ENTRY (3 ,0 ,L3_3_WB |L3_LKUP (1 )), +}; +enum {HAS_GLOBAL_MOCS =BIT (0 ),HAS_ENGINE_MOCS =BIT (1 ),
@@ -367,7 +391,16 @@ static unsigned int get_mocs_settings(const struct drm_i915_private *i915, {unsigned int flags; -if (IS_XEHPSDV (i915)) { +if (IS_DG2 (i915)) { +if (IS_DG2_GT_STEP (i915,G10 ,STEP_A0 , (STEP_B0 -1 ))) { + table->size =ARRAY_SIZE (dg2_mocs_table_g10_ax); + table->table = dg2_mocs_table_g10_ax; + }else { + table->size =ARRAY_SIZE (dg2_mocs_table); + table->table = dg2_mocs_table; + } + table->n_entries =GEN9_NUM_MOCS_ENTRIES ; + }else if (IS_XEHPSDV (i915)) { table->size =ARRAY_SIZE (xehpsdv_mocs_table); table->table = xehpsdv_mocs_table; table->n_entries =GEN9_NUM_MOCS_ENTRIES ;
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v3 22/30] drm/i915/dg2: Define MOCS table for DG2
Quoted 3 lines · Matt Roper
Bspec: 45101, 45427
Cc Ramalingam C <[email protected]>(v5)Signed-off-by Matt Roper <[email protected]>
Quoted 64 lines
--- drivers/gpu/drm/i915/gt/intel_mocs.c | 35 +++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/gt/intel_mocs.c +34
-1@@ -341,6 +341,30 @@ static const struct drm_i915_mocs_entry xehpsdv_mocs_table[] = { MOCS_ENTRY(63, 0, L3_1_UC), }; +static const struct drm_i915_mocs_entry dg2_mocs_table[] = { +/* UC - Coherent; GO:L3 */ +MOCS_ENTRY (0 ,0 ,L3_1_UC |L3_LKUP (1 )), +/* UC - Coherent; GO:Memory */ +MOCS_ENTRY (1 ,0 ,L3_1_UC |L3_GLBGO (1 ) |L3_LKUP (1 )), +/* UC - Non-Coherent; GO:Memory */ +MOCS_ENTRY (2 ,0 ,L3_1_UC |L3_GLBGO (1 )), + +/* WB - LC */ +MOCS_ENTRY (3 ,0 ,L3_3_WB |L3_LKUP (1 )), +}; + +static const struct drm_i915_mocs_entry dg2_mocs_table_g10_ax[] = { +/* Wa_14011441408: Set Go to Memory for MOCS#0 */ +MOCS_ENTRY (0 ,0 ,L3_1_UC |L3_GLBGO (1 ) |L3_LKUP (1 )), +/* UC - Coherent; GO:Memory */ +MOCS_ENTRY (1 ,0 ,L3_1_UC |L3_GLBGO (1 ) |L3_LKUP (1 )), +/* UC - Non-Coherent; GO:Memory */ +MOCS_ENTRY (2 ,0 ,L3_1_UC |L3_GLBGO (1 )), + +/* WB - LC */ +MOCS_ENTRY (3 ,0 ,L3_3_WB |L3_LKUP (1 )), +}; +enum {HAS_GLOBAL_MOCS =BIT (0 ),HAS_ENGINE_MOCS =BIT (1 ),@@ -367,7 +391,16 @@ static unsigned int get_mocs_settings(const struct drm_i915_private *i915, {unsigned int flags; -if (IS_XEHPSDV (i915)) { +if (IS_DG2 (i915)) { +if (IS_DG2_GT_STEP (i915,G10 ,STEP_A0 , (STEP_B0 -1 ))) { + table->size =ARRAY_SIZE (dg2_mocs_table_g10_ax); + table->table = dg2_mocs_table_g10_ax; + }else { + table->size =ARRAY_SIZE (dg2_mocs_table); + table->table = dg2_mocs_table; + } + table->n_entries =GEN9_NUM_MOCS_ENTRIES ; + }else if (IS_XEHPSDV (i915)) { table->size =ARRAY_SIZE (xehpsdv_mocs_table); table->table = xehpsdv_mocs_table; table->n_entries =GEN9_NUM_MOCS_ENTRIES ;Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 23/30 drm/i915/dg2: Add MPLLB programming for SNPS PHY
In reply to Matt RoperDG2's SNPS PHYs incorporate a dedicated port PLL called MPLLB which takes the place of the shared DPLLs we've used on past platforms. Let's add the MPLLB programming sequences; they'll be plugged into the rest of the code in future patches.
Bspec: 54032
Bspec: 53881
--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/display/intel_display.c | 1 + .../drm/i915/display/intel_display_types.h | 17 +- drivers/gpu/drm/i915/display/intel_dpll.c | 12 +- drivers/gpu/drm/i915/display/intel_snps_phy.c | 517 ++++++++++++++++++ drivers/gpu/drm/i915/display/intel_snps_phy.h | 18 + drivers/gpu/drm/i915/i915_reg.h | 56 ++ 7 files changed, 616 insertions(+), 6 deletions(-) create mode 100644 drivers/gpu/drm/i915/display/intel_snps_phy.c create mode 100644 drivers/gpu/drm/i915/display/intel_snps_phy.h
drivers/gpu/drm/i915/Makefile +1 -0
@@ -267,6 +267,7 @@ i915-y += \ display/intel_pps.o \ display/intel_qp_tables.o \ display/intel_sdvo.o \ + display/intel_snps_phy.o \ display/intel_tv.o \ display/intel_vdsc.o \ display/intel_vrr.o \
drivers/gpu/drm/i915/display/intel_display.c +1 -0
@@ -59,6 +59,7 @@#include "display/intel_hdmi.h" #include "display/intel_lvds.h" #include "display/intel_sdvo.h" +#include "display/intel_snps_phy.h" #include "display/intel_tv.h" #include "display/intel_vdsc.h" #include "display/intel_vrr.h"
drivers/gpu/drm/i915/display/intel_display_types.h +16 -1
@@ -884,6 +884,18 @@ enum intel_output_format { INTEL_OUTPUT_FORMAT_YCBCR444, }; +struct intel_mpllb_state { +u32 clock;/* in KHz */ +u32 ref_control; +u32 mpllb_cp; +u32 mpllb_div; +u32 mpllb_div2; +u32 mpllb_fracn1; +u32 mpllb_fracn2; +u32 mpllb_sscen; +u32 mpllb_sscstep; +}; +struct intel_crtc_state {/* * uapi (drm) state. This is the software state shown to userspace.
@@ -1018,7 +1030,10 @@ struct intel_crtc_state {struct intel_shared_dpll *shared_dpll;/* Actual register state of the dpll, for shared dpll cross-checking. */ -struct intel_dpll_hw_state dpll_hw_state; +union { +struct intel_dpll_hw_state dpll_hw_state; +struct intel_mpllb_state mpllb_state; + };/* * ICL reserved DPLLs for the CRTC/port. The active PLL is selected by
drivers/gpu/drm/i915/display/intel_dpll.c +7 -5
@@ -11,6 +11,7 @@#include "intel_lvds.h" #include "intel_panel.h" #include "intel_sideband.h" +#include "display/intel_snps_phy.h" struct intel_limit { struct {
@@ -923,12 +924,13 @@ static int hsw_crtc_compute_clock(struct intel_crtc *crtc,struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);struct intel_atomic_state *state =to_intel_atomic_state (crtc_state->uapi.state); +struct intel_encoder *encoder = +intel_get_crtc_new_encoder (state, crtc_state); -if (!intel_crtc_has_type (crtc_state,INTEL_OUTPUT_DSI ) || -DISPLAY_VER (dev_priv) >=11 ) { -struct intel_encoder *encoder = -intel_get_crtc_new_encoder (state, crtc_state); - +if (IS_DG2 (dev_priv)) { +return intel_mpllb_calc_state (crtc_state, encoder); + }else if (!intel_crtc_has_type (crtc_state,INTEL_OUTPUT_DSI ) || +DISPLAY_VER (dev_priv) >=11 ) {if (!intel_reserve_shared_dplls (state, crtc, encoder)) { drm_dbg_kms(&dev_priv->drm, "failed to find PLL for pipe %c\n",
drivers/gpu/drm/i915/display/intel_snps_phy.c new file +517 -0
517 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_snps_phy.h new file +18 -0
@@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: MIT */ +/* +* Copyright © 2019 Intel Corporation +*/ + +#ifndef __INTEL_SNPS_PHY_H__ +#define __INTEL_SNPS_PHY_H__ + +struct intel_encoder ; +struct intel_crtc_state ; + +int intel_mpllb_calc_state (struct intel_crtc_state *crtc_state, +struct intel_encoder *encoder); +void intel_mpllb_enable (struct intel_encoder *encoder, +const struct intel_crtc_state *crtc_state); +void intel_mpllb_disable (struct intel_encoder *encoder); + +#endif /* __INTEL_SNPS_PHY_H__ */
drivers/gpu/drm/i915/i915_reg.h +56 -0
68 lines not on this page · raw message
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v3 23/30] drm/i915/dg2: Add MPLLB programming for SNPS PHY
Quoted 5 lines · Matt Roper
DG2's SNPS PHYs incorporate a dedicated port PLL called MPLLB which takes the place of the shared DPLLs we've used on past platforms. Let's add the MPLLB programming sequences; they'll be plugged into the rest of the code in future patches.
Quoted 7 lines
Bspec: 54032
Bspec: 53881Cc Lucas De Marchi <[email protected]>Signed-off-by Matt Roper <[email protected]>Signed-off-by Vandita Kulkarni <[email protected]>Signed-off-by Jani Nikula <[email protected]>Signed-off-by Nidhi Gupta <[email protected]>
Quoted 730 lines
--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/display/intel_display.c | 1 + .../drm/i915/display/intel_display_types.h | 17 +- drivers/gpu/drm/i915/display/intel_dpll.c | 12 +- drivers/gpu/drm/i915/display/intel_snps_phy.c | 517 ++++++++++++++++++ drivers/gpu/drm/i915/display/intel_snps_phy.h | 18 + drivers/gpu/drm/i915/i915_reg.h | 56 ++ 7 files changed, 616 insertions(+), 6 deletions(-) create mode 100644 drivers/gpu/drm/i915/display/intel_snps_phy.c create mode 100644 drivers/gpu/drm/i915/display/intel_snps_phy.hdrivers/gpu/drm/i915/Makefile +1
-0@@ -267,6 +267,7 @@ i915-y += \ display/intel_pps.o \ display/intel_qp_tables.o \ display/intel_sdvo.o \ + display/intel_snps_phy.o \ display/intel_tv.o \ display/intel_vdsc.o \ display/intel_vrr.o \drivers/gpu/drm/i915/display/intel_display.c +1
-0@@ -59,6 +59,7 @@#include "display/intel_hdmi.h" #include "display/intel_lvds.h" #include "display/intel_sdvo.h" +#include "display/intel_snps_phy.h" #include "display/intel_tv.h" #include "display/intel_vdsc.h" #include "display/intel_vrr.h" drivers/gpu/drm/i915/display/intel_display_types.h +16
-1@@ -884,6 +884,18 @@ enum intel_output_format { INTEL_OUTPUT_FORMAT_YCBCR444, }; +struct intel_mpllb_state { +u32 clock;/* in KHz */ +u32 ref_control; +u32 mpllb_cp; +u32 mpllb_div; +u32 mpllb_div2; +u32 mpllb_fracn1; +u32 mpllb_fracn2; +u32 mpllb_sscen; +u32 mpllb_sscstep; +}; +struct intel_crtc_state {/* * uapi (drm) state. This is the software state shown to userspace. @@ -1018,7 +1030,10 @@ struct intel_crtc_state {struct intel_shared_dpll *shared_dpll;/* Actual register state of the dpll, for shared dpll cross-checking. */ -struct intel_dpll_hw_state dpll_hw_state; +union { +struct intel_dpll_hw_state dpll_hw_state; +struct intel_mpllb_state mpllb_state; + };/* * ICL reserved DPLLs for the CRTC/port. The active PLL is selected by drivers/gpu/drm/i915/display/intel_dpll.c +7
-5@@ -11,6 +11,7 @@#include "intel_lvds.h" #include "intel_panel.h" #include "intel_sideband.h" +#include "display/intel_snps_phy.h" struct intel_limit { struct {@@ -923,12 +924,13 @@ static int hsw_crtc_compute_clock(struct intel_crtc *crtc,struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);struct intel_atomic_state *state =to_intel_atomic_state (crtc_state->uapi.state); +struct intel_encoder *encoder = +intel_get_crtc_new_encoder (state, crtc_state); -if (!intel_crtc_has_type (crtc_state,INTEL_OUTPUT_DSI ) || -DISPLAY_VER (dev_priv) >=11 ) { -struct intel_encoder *encoder = -intel_get_crtc_new_encoder (state, crtc_state); - +if (IS_DG2 (dev_priv)) { +return intel_mpllb_calc_state (crtc_state, encoder); + }else if (!intel_crtc_has_type (crtc_state,INTEL_OUTPUT_DSI ) || +DISPLAY_VER (dev_priv) >=11 ) {if (!intel_reserve_shared_dplls (state, crtc, encoder)) { drm_dbg_kms(&dev_priv->drm, "failed to find PLL for pipe %c\n",drivers/gpu/drm/i915/display/intel_snps_phy.c new file +517
-0@@ -0,0 +1,517 @@ +// SPDX-License-Identifier: MIT +/* +* Copyright © 2019 Intel Corporation +*/ + +#include "intel_de.h" +#include "intel_display_types.h" +#include "intel_snps_phy.h" + +/** +* DOC: Synopsis PHY support +* +* Synopsis PHYs are primarily programmed by looking up magic register values +* in tables rather than calculating the necessary values at runtime. +* +* Of special note is that the SNPS PHYs include a dedicated port PLL, known as +* an "MPLLB." The MPLLB replaces the shared DPLL functionality used on other +* platforms and must be programming directly during the modeset sequence +* since it is not handled by the shared DPLL framework as on other platforms. +*/ + +/* +* Basic DP link rates with 100 MHz reference clock. +*/ + +static const struct intel_mpllb_state dg2_dp_rbr_100 = { + .clock =162000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,3 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,4 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,20 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_TX_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_PMIX_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FREQ_VCO ,2 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,226 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,5 ), + .mpllb_fracn2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_QUOT ,39321 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_REM ,3 ), +}; + +static const struct intel_mpllb_state dg2_dp_hbr1_100 = { + .clock =270000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,3 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,4 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,20 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_TX_CLK_DIV ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FREQ_VCO ,3 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,184 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,1 ), +}; + +static const struct intel_mpllb_state dg2_dp_hbr2_100 = { + .clock =540000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,3 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,4 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,20 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FREQ_VCO ,3 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,184 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,1 ), +}; + +static const struct intel_mpllb_state dg2_dp_hbr3_100 = { + .clock =810000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,3 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,4 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,19 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,292 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,1 ), +}; + +static const struct intel_mpllb_state *dg2_dp_100_tables[] = { + &dg2_dp_rbr_100, + &dg2_dp_hbr1_100, + &dg2_dp_hbr2_100, + &dg2_dp_hbr3_100, +NULL , +}; + +/* +* Basic DP link rates with 38.4 MHz reference clock. +*/ + +static const struct intel_mpllb_state dg2_dp_rbr_38_4 = { + .clock =162000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,1 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,5 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,25 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_TX_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_PMIX_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FREQ_VCO ,2 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,304 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,1 ), + .mpllb_fracn2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_QUOT ,49152 ), +}; + +static const struct intel_mpllb_state dg2_dp_hbr1_38_4 = { + .clock =270000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,1 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,5 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,25 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_TX_CLK_DIV ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_PMIX_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FREQ_VCO ,3 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,248 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,1 ), + .mpllb_fracn2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_QUOT ,40960 ), +}; + +static const struct intel_mpllb_state dg2_dp_hbr2_38_4 = { + .clock =540000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,1 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,5 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,25 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_PMIX_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FREQ_VCO ,3 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,248 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,1 ), + .mpllb_fracn2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_QUOT ,40960 ), +}; + +static const struct intel_mpllb_state dg2_dp_hbr3_38_4 = { + .clock =810000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,1 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,6 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,26 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_PMIX_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,388 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,1 ), + .mpllb_fracn2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_QUOT ,61440 ), +}; + +static const struct intel_mpllb_state *dg2_dp_38_4_tables[] = { + &dg2_dp_rbr_38_4, + &dg2_dp_hbr1_38_4, + &dg2_dp_hbr2_38_4, + &dg2_dp_hbr3_38_4, +NULL , +}; + +/* +* eDP link rates with 100 MHz reference clock. +*/ + +static const struct intel_mpllb_state dg2_edp_r216 = { + .clock =216000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,3 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,4 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,19 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_TX_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_PMIX_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,312 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,5 ), + .mpllb_fracn2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_QUOT ,52428 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_REM ,4 ), + .mpllb_sscen = +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_PEAK ,50961 ), + .mpllb_sscstep = +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_STEPSIZE ,65752 ), +}; + +static const struct intel_mpllb_state dg2_edp_r243 = { + .clock =243000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,3 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,4 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,20 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_TX_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_PMIX_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,356 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,5 ), + .mpllb_fracn2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_QUOT ,26214 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_REM ,2 ), + .mpllb_sscen = +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_PEAK ,57331 ), + .mpllb_sscstep = +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_STEPSIZE ,73971 ), +}; + +static const struct intel_mpllb_state dg2_edp_r324 = { + .clock =324000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,3 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,4 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,20 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_TX_CLK_DIV ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_PMIX_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FREQ_VCO ,2 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,226 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,5 ), + .mpllb_fracn2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_QUOT ,39321 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_REM ,3 ), + .mpllb_sscen = +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_PEAK ,38221 ), + .mpllb_sscstep = +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_STEPSIZE ,49314 ), +}; + +static const struct intel_mpllb_state dg2_edp_r432 = { + .clock =432000 , + .ref_control = +REG_FIELD_PREP (SNPS_PHY_REF_CONTROL_REF_RANGE ,3 ), + .mpllb_cp = +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT ,4 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP ,19 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_INT_GS ,65 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_CP_PROP_GS ,127 ), + .mpllb_div = +REG_FIELD_PREP (SNPS_PHY_MPLLB_DIV5_CLK_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_TX_CLK_DIV ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_PMIX_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_V2I ,2 ), + .mpllb_div2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_REF_CLK_DIV ,2 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_MULTIPLIER ,312 ), + .mpllb_fracn1 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_DEN ,5 ), + .mpllb_fracn2 = +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_QUOT ,52428 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_FRACN_REM ,4 ), + .mpllb_sscen = +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_EN ,1 ) | +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_PEAK ,50961 ), + .mpllb_sscstep = +REG_FIELD_PREP (SNPS_PHY_MPLLB_SSC_STEPSIZE ,65752 ), +}; + +static const struct intel_mpllb_state *dg2_edp_tables[] = { + &dg2_dp_rbr_100, + &dg2_edp_r216, + &dg2_edp_r243, + &dg2_dp_hbr1_100, + &dg2_edp_r324, + &dg2_edp_r432, + &dg2_dp_hbr2_100, + &dg2_dp_hbr3_100, +NULL , +}; + +int intel_mpllb_calc_state (struct intel_crtc_state *crtc_state, +struct intel_encoder *encoder) +{ +const struct intel_mpllb_state **tables; +int i; + +if (intel_crtc_has_type (crtc_state,INTEL_OUTPUT_EDP )) { + tables = dg2_edp_tables; + }else if (intel_crtc_has_dp_encoder (crtc_state)) { +/* +* FIXME: Initially we're just enabling the "combo" outputs on +* port A-D. The MPLLB for those ports takes an input from the +* "Display Filter PLL" which always has an output frequency +* of 100 MHz, hence the use of the _100 tables below. +* +* Once we enable port TC1 it will either use the same 100 MHz +* "Display Filter PLL" (when strapped to support a native +* display connection) or different 38.4 MHz "Filter PLL" when +* strapped to support a USB connection, so we'll need to check +* that to determine which table to use. +*/ +if (0 ) + tables = dg2_dp_38_4_tables; +else + tables = dg2_dp_100_tables; + }else { +/* TODO: Add HDMI support */ +MISSING_CASE (encoder->type); +return -EINVAL ; + } + +for (i =0 ; tables[i]; i++) { +if (crtc_state->port_clock <= tables[i]->clock) { + crtc_state->mpllb_state = *tables[i]; +return 0 ; + } + } + +return -EINVAL ; +} + +void intel_mpllb_enable (struct intel_encoder *encoder, +const struct intel_crtc_state *crtc_state) +{ +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +const struct intel_mpllb_state *pll_state = &crtc_state->mpllb_state; +enum phy phy =intel_port_to_phy (dev_priv, encoder->port); +i915_reg_t enable_reg = (phy <=PHY_D ? +DG2_PLL_ENABLE (phy) :MG_PLL_ENABLE (0 )); + +/* +* 3. Software programs the following PLL registers for the desired +* frequency. +*/ +intel_de_write (dev_priv,SNPS_PHY_MPLLB_CP (phy), pll_state->mpllb_cp); +intel_de_write (dev_priv,SNPS_PHY_MPLLB_DIV (phy), pll_state->mpllb_div); +intel_de_write (dev_priv,SNPS_PHY_MPLLB_DIV2 (phy), pll_state->mpllb_div2); +intel_de_write (dev_priv,SNPS_PHY_MPLLB_SSCEN (phy), pll_state->mpllb_sscen); +intel_de_write (dev_priv,SNPS_PHY_MPLLB_SSCSTEP (phy), pll_state->mpllb_sscstep); +intel_de_write (dev_priv,SNPS_PHY_MPLLB_FRACN1 (phy), pll_state->mpllb_fracn1); +intel_de_write (dev_priv,SNPS_PHY_MPLLB_FRACN2 (phy), pll_state->mpllb_fracn2); + +/* +* 4. If the frequency will result in a change to the voltage +* requirement, follow the Display Voltage Frequency Switching - +* Sequence Before Frequency Change. +* +* We handle this step in bxt_set_cdclk(). +*/ + +/* 5. Software sets DPLL_ENABLE [PLL Enable] to "1". */ +intel_uncore_rmw (&dev_priv->uncore, enable_reg,0 ,PLL_ENABLE ); + +/* +* 9. Software sets SNPS_PHY_MPLLB_DIV dp_mpllb_force_en to "1". This +* will keep the PLL running during the DDI lane programming and any +* typeC DP cable disconnect. Do not set the force before enabling the +* PLL because that will start the PLL before it has sampled the +* divider values. +*/ +intel_de_write (dev_priv,SNPS_PHY_MPLLB_DIV (phy), + pll_state->mpllb_div |SNPS_PHY_MPLLB_FORCE_EN ); + +/* +* 10. Software polls on register DPLL_ENABLE [PLL Lock] to confirm PLL +* is locked at new settings. This register bit is sampling PHY +* dp_mpllb_state interface signal. +*/ +if (intel_de_wait_for_set (dev_priv, enable_reg,PLL_LOCK ,5 )) +DRM_ERROR ("Port %c PLL not locked\n" ,phy_name (phy)); + +/* +* 11. If the frequency will result in a change to the voltage +* requirement, follow the Display Voltage Frequency Switching - +* Sequence After Frequency Change. +* +* We handle this step in bxt_set_cdclk(). +*/ +} + +void intel_mpllb_disable (struct intel_encoder *encoder) +{ +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +enum phy phy =intel_port_to_phy (dev_priv, encoder->port); +i915_reg_t enable_reg = (phy <=PHY_D ? +DG2_PLL_ENABLE (phy) :MG_PLL_ENABLE (0 )); + +/* +* 1. If the frequency will result in a change to the voltage +* requirement, follow the Display Voltage Frequency Switching - +* Sequence Before Frequency Change. +* +* We handle this step in bxt_set_cdclk(). +*/ + +/* 2. Software programs DPLL_ENABLE [PLL Enable] to "0" */ +intel_uncore_rmw (&dev_priv->uncore, enable_reg,PLL_ENABLE ,0 ); + +/* +* 4. Software programs SNPS_PHY_MPLLB_DIV dp_mpllb_force_en to "0". +* This will allow the PLL to stop running. +*/ +intel_uncore_rmw (&dev_priv->uncore,SNPS_PHY_MPLLB_DIV (phy), +SNPS_PHY_MPLLB_FORCE_EN ,0 ); + +/* +* 5. Software polls DPLL_ENABLE [PLL Lock] for PHY acknowledgment +* (dp_txX_ack) that the new transmitter setting request is completed. +*/ +if (intel_de_wait_for_clear (dev_priv, enable_reg,PLL_LOCK ,5 )) +DRM_ERROR ("Port %c PLL not locked\n" ,phy_name (phy)); + +/* +* 6. If the frequency will result in a change to the voltage +* requirement, follow the Display Voltage Frequency Switching - +* Sequence After Frequency Change. +* +* We handle this step in bxt_set_cdclk(). +*/ +}drivers/gpu/drm/i915/display/intel_snps_phy.h new file +18
-0@@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: MIT */ +/* +* Copyright © 2019 Intel Corporation +*/ + +#ifndef __INTEL_SNPS_PHY_H__ +#define __INTEL_SNPS_PHY_H__ + +struct intel_encoder ; +struct intel_crtc_state ; + +int intel_mpllb_calc_state (struct intel_crtc_state *crtc_state, +struct intel_encoder *encoder); +void intel_mpllb_enable (struct intel_encoder *encoder, +const struct intel_crtc_state *crtc_state); +void intel_mpllb_disable (struct intel_encoder *encoder); + +#endif /* __INTEL_SNPS_PHY_H__ */ drivers/gpu/drm/i915/i915_reg.h +56
-0@@ -2286,6 +2286,57 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define MG_DP_MODE_CFG_DP_X2_MODE (1 << 7)#define MG_DP_MODE_CFG_DP_X1_MODE (1 << 6) +/* +* DG2 SNPS PHY registers (TC1 = PHY_E) +*/ +#define _SNPS_PHY_A_BASE 0x168000 +#define _SNPS_PHY_B_BASE 0x169000 +#define _SNPS_PHY (phy) _PHY(phy, \ + _SNPS_PHY_A_BASE, \ + _SNPS_PHY_B_BASE) +#define _SNPS2 (phy, reg) (_SNPS_PHY(phy) - \ + _SNPS_PHY_A_BASE + (reg)) +#define _MMIO_SNPS (phy, reg) _MMIO(_SNPS2(phy, reg)) +#define _MMIO_SNPS_LN (ln, phy, reg) _MMIO(_SNPS2(phy, \ + (reg) + (ln) * 0x10)) + +#define SNPS_PHY_MPLLB_CP (phy) _MMIO_SNPS(phy, 0x168000) +#define SNPS_PHY_MPLLB_CP_INT REG_GENMASK(31, 25) +#define SNPS_PHY_MPLLB_CP_INT_GS REG_GENMASK(23, 17) +#define SNPS_PHY_MPLLB_CP_PROP REG_GENMASK(15, 9) +#define SNPS_PHY_MPLLB_CP_PROP_GS REG_GENMASK(7, 1) + +#define SNPS_PHY_MPLLB_DIV (phy) _MMIO_SNPS(phy, 0x168004) +#define SNPS_PHY_MPLLB_FORCE_EN REG_BIT(31) +#define SNPS_PHY_MPLLB_DIV5_CLK_EN REG_BIT(29) +#define SNPS_PHY_MPLLB_V2I REG_GENMASK(27, 26) +#define SNPS_PHY_MPLLB_FREQ_VCO REG_GENMASK(25, 24) +#define SNPS_PHY_MPLLB_PMIX_EN REG_BIT(10) +#define SNPS_PHY_MPLLB_TX_CLK_DIV REG_GENMASK(7, 5) + +#define SNPS_PHY_MPLLB_FRACN1 (phy) _MMIO_SNPS(phy, 0x168008) +#define SNPS_PHY_MPLLB_FRACN_EN REG_BIT(31) +#define SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN REG_BIT(30) +#define SNPS_PHY_MPLLB_FRACN_DEN REG_GENMASK(15, 0) + +#define SNPS_PHY_MPLLB_FRACN2 (phy) _MMIO_SNPS(phy, 0x16800C) +#define SNPS_PHY_MPLLB_FRACN_REM REG_GENMASK(31, 16) +#define SNPS_PHY_MPLLB_FRACN_QUOT REG_GENMASK(15, 0) + +#define SNPS_PHY_MPLLB_SSCEN (phy) _MMIO_SNPS(phy, 0x168014) +#define SNPS_PHY_MPLLB_SSC_EN REG_BIT(31) +#define SNPS_PHY_MPLLB_SSC_PEAK REG_GENMASK(29, 10) + +#define SNPS_PHY_MPLLB_SSCSTEP (phy) _MMIO_SNPS(phy, 0x168018) +#define SNPS_PHY_MPLLB_SSC_STEPSIZE REG_GENMASK(31, 11) + +#define SNPS_PHY_MPLLB_DIV2 (phy) _MMIO_SNPS(phy, 0x16801C) +#define SNPS_PHY_MPLLB_REF_CLK_DIV REG_GENMASK(14, 12) +#define SNPS_PHY_MPLLB_MULTIPLIER REG_GENMASK(11, 0) + +#define SNPS_PHY_REF_CONTROL (phy) _MMIO_SNPS(phy, 0x168188) +#define SNPS_PHY_REF_CONTROL_REF_RANGE REG_GENMASK(31, 27) +/* The spec defines this only for BXT PHY0, but lets assume that this * would exist for PHY1 too if it had a second channel. */ @@ -10608,6 +10659,11 @@ enum skl_power_gate {#define CNL_DPLL_ENABLE (pll) _MMIO_PLL3(pll, DPLL0_ENABLE, DPLL1_ENABLE, \ _ADLS_DPLL2_ENABLE, _ADLS_DPLL3_ENABLE) +#define _DG2_PLL3_ENABLE 0x4601C + +#define DG2_PLL_ENABLE (pll) _MMIO_PLL3(pll, DPLL0_ENABLE, DPLL1_ENABLE, \ + _ADLS_DPLL2_ENABLE, _DG2_PLL3_ENABLE) +#define TBT_PLL_ENABLE _MMIO(0x46020)#define _MG_PLL1_ENABLE 0x46030Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 24/30 drm/i915/dg2: Add MPLLB programming for HDMI
In reply to Matt RoperAt the moment we don't have a proper algorithm that can be used to calculate PHY settings for arbitrary HDMI link rates. The PHY tables here should support the regular modes of real-world HDMI monitors.
Bspec: 54032
--- drivers/gpu/drm/i915/display/intel_ddi.c | 14 +- drivers/gpu/drm/i915/display/intel_display.c | 47 +++ drivers/gpu/drm/i915/display/intel_hdmi.c | 11 + drivers/gpu/drm/i915/display/intel_snps_phy.c | 286 +++++++++++++++++- drivers/gpu/drm/i915/display/intel_snps_phy.h | 7 + drivers/gpu/drm/i915/i915_reg.h | 3 + 6 files changed, 355 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +13 -1
@@ -51,6 +51,7 @@#include "intel_panel.h" #include "intel_pps.h" #include "intel_psr.h" +#include "intel_snps_phy.h" #include "intel_sprite.h" #include "intel_tc.h" #include "intel_vdsc.h"
@@ -3745,6 +3746,15 @@ void intel_ddi_get_clock(struct intel_encoder *encoder, &crtc_state->dpll_hw_state); } +static void dg2_ddi_get_config (struct intel_encoder *encoder, +struct intel_crtc_state *crtc_state) +{ +intel_mpllb_readout_hw_state (encoder, &crtc_state->mpllb_state); + crtc_state->port_clock =intel_mpllb_calc_port_clock (encoder, &crtc_state->mpllb_state); + +intel_ddi_get_config (encoder, crtc_state); +} +static void adls_ddi_get_config (struct intel_encoder *encoder,struct intel_crtc_state *crtc_state) {
@@ -4606,7 +4616,9 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port) encoder->cloneable =0 ; encoder->pipe_mask = ~0 ; -if (IS_ALDERLAKE_S (dev_priv)) { +if (IS_DG2 (dev_priv)) { + encoder->get_config = dg2_ddi_get_config; + }else if (IS_ALDERLAKE_S (dev_priv)) { encoder->enable_clock = adls_ddi_enable_clock; encoder->disable_clock = adls_ddi_disable_clock; encoder->is_clock_enabled = adls_ddi_is_clock_enabled;
drivers/gpu/drm/i915/display/intel_display.c +47 -0
59 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_hdmi.c +11 -0
@@ -51,6 +51,7 @@#include "intel_hdmi.h" #include "intel_lspcon.h" #include "intel_panel.h" +#include "intel_snps_phy.h" static struct drm_device *intel_hdmi_to_dev (struct intel_hdmi *intel_hdmi) {
@@ -1850,6 +1851,16 @@ hdmi_port_clock_valid(struct intel_hdmi *hdmi,if (IS_CHERRYVIEW (dev_priv) && clock >216000 && clock <240000 )return MODE_CLOCK_RANGE ; +/* +* SNPS PHYs' MPLLB table-based programming can only handle a fixed +* set of link rates. +* +* FIXME: We will hopefully get an algorithmic way of programming +* the MPLLB for HDMI in the future. +*/ +if (IS_DG2 (dev_priv)) +return intel_snps_phy_check_hdmi_link_rate (clock); +return MODE_OK ; }
drivers/gpu/drm/i915/display/intel_snps_phy.c +274 -12
312 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_snps_phy.h +7 -0
@@ -8,11 +8,18 @@struct intel_encoder ;struct intel_crtc_state ; +struct intel_mpllb_state ;int intel_mpllb_calc_state (struct intel_crtc_state *crtc_state,struct intel_encoder *encoder);void intel_mpllb_enable (struct intel_encoder *encoder,const struct intel_crtc_state *crtc_state);void intel_mpllb_disable (struct intel_encoder *encoder); +void intel_mpllb_readout_hw_state (struct intel_encoder *encoder, +struct intel_mpllb_state *pll_state); +int intel_mpllb_calc_port_clock (struct intel_encoder *encoder, +const struct intel_mpllb_state *pll_state); + +int intel_snps_phy_check_hdmi_link_rate (int clock);#endif /* __INTEL_SNPS_PHY_H__ */
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -2325,12 +2325,15 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define SNPS_PHY_MPLLB_SSCEN (phy) _MMIO_SNPS(phy, 0x168014)#define SNPS_PHY_MPLLB_SSC_EN REG_BIT(31) +#define SNPS_PHY_MPLLB_SSC_UP_SPREAD REG_BIT(30)#define SNPS_PHY_MPLLB_SSC_PEAK REG_GENMASK(29, 10)#define SNPS_PHY_MPLLB_SSCSTEP (phy) _MMIO_SNPS(phy, 0x168018)#define SNPS_PHY_MPLLB_SSC_STEPSIZE REG_GENMASK(31, 11)#define SNPS_PHY_MPLLB_DIV2 (phy) _MMIO_SNPS(phy, 0x16801C) +#define SNPS_PHY_MPLLB_HDMI_PIXEL_CLK_DIV REG_GENMASK(19, 18) +#define SNPS_PHY_MPLLB_HDMI_DIV REG_GENMASK(17, 15)#define SNPS_PHY_MPLLB_REF_CLK_DIV REG_GENMASK(14, 12)#define SNPS_PHY_MPLLB_MULTIPLIER REG_GENMASK(11, 0)
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 25/30 drm/i915/dg2: Add vswing programming for SNPS phys
In reply to Matt RoperVswing programming for SNPS PHYs is just a single step -- look up the value that corresponds to the voltage level from a table and program it into the SNPS_PHY_TX_EQ register.
Bspec: 53920
--- drivers/gpu/drm/i915/display/intel_ddi.c | 23 ++++++-- drivers/gpu/drm/i915/display/intel_snps_phy.c | 54 +++++++++++++++++++ drivers/gpu/drm/i915/display/intel_snps_phy.h | 4 ++ drivers/gpu/drm/i915/i915_reg.h | 5 ++ 4 files changed, 83 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +20 -3
@@ -1496,6 +1496,16 @@ static int intel_ddi_dp_level(struct intel_dp *intel_dp)return translate_signal_level (intel_dp, signal_levels); } +static void +dg2_set_signal_levels (struct intel_dp *intel_dp, +const struct intel_crtc_state *crtc_state) +{ +struct intel_encoder *encoder = &dp_to_dig_port (intel_dp)->base; +int level =intel_ddi_dp_level (intel_dp); + +intel_snps_phy_ddi_vswing_sequence (encoder, level); +} +static void tgl_set_signal_levels (struct intel_dp *intel_dp,const struct intel_crtc_state *crtc_state)
@@ -2563,7 +2573,10 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,*/ /* 7.e Configure voltage swing and related IO settings */ -tgl_ddi_vswing_sequence (encoder, crtc_state, level); +if (IS_DG2 (dev_priv)) +intel_snps_phy_ddi_vswing_sequence (encoder, level); +else +tgl_ddi_vswing_sequence (encoder, crtc_state, level);/* * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up
@@ -3102,7 +3115,9 @@ static void intel_enable_ddi_hdmi(struct intel_atomic_state *state,"[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n" , connector->base.id, connector->name); -if (DISPLAY_VER (dev_priv) >=12 ) +if (IS_DG2 (dev_priv)) +intel_snps_phy_ddi_vswing_sequence (encoder,U32_MAX ); +else if (DISPLAY_VER (dev_priv) >=12 )tgl_ddi_vswing_sequence (encoder, crtc_state, level);else if (DISPLAY_VER (dev_priv) ==11 )icl_ddi_vswing_sequence (encoder, crtc_state, level);
@@ -4075,7 +4090,9 @@ intel_ddi_init_dp_connector(struct intel_digital_port *dig_port) dig_port->dp.set_link_train = intel_ddi_set_link_train; dig_port->dp.set_idle_link_train = intel_ddi_set_idle_link_train; -if (DISPLAY_VER (dev_priv) >=12 ) +if (IS_DG2 (dev_priv)) + dig_port->dp.set_signal_levels = dg2_set_signal_levels; +else if (DISPLAY_VER (dev_priv) >=12 ) dig_port->dp.set_signal_levels = tgl_set_signal_levels;else if (DISPLAY_VER (dev_priv) >=11 ) dig_port->dp.set_signal_levels = icl_set_signal_levels;
drivers/gpu/drm/i915/display/intel_snps_phy.c +54 -0
60 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_snps_phy.h +4 -0
@@ -6,6 +6,8 @@#ifndef __INTEL_SNPS_PHY_H__#define __INTEL_SNPS_PHY_H__ +#include <linux/types.h> +struct intel_encoder ;struct intel_crtc_state ;struct intel_mpllb_state ;
@@ -21,5 +23,7 @@ int intel_mpllb_calc_port_clock(struct intel_encoder *encoder, const struct intel_mpllb_state *pll_state);int intel_snps_phy_check_hdmi_link_rate (int clock); +void intel_snps_phy_ddi_vswing_sequence (struct intel_encoder *encoder, +u32 level);#endif /* __INTEL_SNPS_PHY_H__ */
drivers/gpu/drm/i915/i915_reg.h +5 -0
@@ -2340,6 +2340,11 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define SNPS_PHY_REF_CONTROL (phy) _MMIO_SNPS(phy, 0x168188)#define SNPS_PHY_REF_CONTROL_REF_RANGE REG_GENMASK(31, 27) +#define SNPS_PHY_TX_EQ (ln, phy) _MMIO_SNPS_LN(ln, phy, 0x168300) +#define SNPS_PHY_TX_EQ_MAIN REG_GENMASK(23, 18) +#define SNPS_PHY_TX_EQ_POST REG_GENMASK(15, 10) +#define SNPS_PHY_TX_EQ_PRE REG_GENMASK(7, 2) +/* The spec defines this only for BXT PHY0, but lets assume that this * would exist for PHY1 too if it had a second channel. */
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 26/30 drm/i915/dg2: Update modeset sequences
In reply to Matt RoperDG2 has some changes to the expected modesetting sequences when compared to gen12. Adjust our driver logic accordingly. Although the DP sequence is pretty similar to TGL's, there are some steps that change, so let's split the handling for that out into a separate function.
v2:
- Switch wait_for_us() -> _wait_for() so that we can parameterize the timeout rather than duplicating the macro call. (Jani)
Bspec: 54128
--- drivers/gpu/drm/i915/display/intel_ddi.c | 131 +++++++++++++++++++++-- 1 file changed, 123 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +123 -8
@@ -172,14 +172,18 @@ void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,static void intel_wait_ddi_buf_active (struct drm_i915_private *dev_priv,enum port port) { +int ret; +/* Wait > 518 usecs for DDI_BUF_CTL to be non idle */ if (DISPLAY_VER (dev_priv) <10 ) {usleep_range (518 ,1000 );return ; } -if (wait_for_us (!(intel_de_read (dev_priv,DDI_BUF_CTL (port)) & -DDI_BUF_IS_IDLE ),500 )) + ret =_wait_for (!(intel_de_read (dev_priv,DDI_BUF_CTL (port)) & +DDI_BUF_IS_IDLE ),IS_DG2 (dev_priv) ?1200 :500 ,10 ,10 ); + +if (ret)drm_err (&dev_priv->drm,"Timeout waiting for DDI BUF %c to get active\n" ,port_name (port)); }
@@ -2207,7 +2211,7 @@ void intel_ddi_sanitize_encoder_pll_mapping(struct intel_encoder *encoder) ddi_clk_needed = false; } -if (ddi_clk_needed || !encoder->disable_clock || +if (ddi_clk_needed || !encoder->is_clock_enabled || !encoder->is_clock_enabled (encoder))return ;
@@ -2488,6 +2492,116 @@ static void intel_ddi_mso_configure(const struct intel_crtc_state *crtc_state) OVERLAP_PIXELS_MASK, dss1); } +static void dg2_ddi_pre_enable_dp (struct intel_atomic_state *state, +struct intel_encoder *encoder, +const struct intel_crtc_state *crtc_state, +const struct drm_connector_state *conn_state) +{ +struct intel_dp *intel_dp =enc_to_intel_dp (encoder); +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +enum phy phy =intel_port_to_phy (dev_priv, encoder->port); +struct intel_digital_port *dig_port =enc_to_dig_port (encoder); +bool is_mst =intel_crtc_has_type (crtc_state,INTEL_OUTPUT_DP_MST ); +int level =intel_ddi_dp_level (intel_dp); + +intel_dp_set_link_params (intel_dp, crtc_state->port_clock, + crtc_state->lane_count); + +/* +* 1. Enable Power Wells +* +* This was handled at the beginning of intel_atomic_commit_tail(), +* before we called down into this function. +*/ + +/* 2. Enable Panel Power if PPS is required */ +intel_pps_on (intel_dp); + +/* +* 3. Enable the port PLL. +*/ +intel_ddi_enable_clock (encoder, crtc_state); + +/* 4. Enable IO power */ +if (!intel_phy_is_tc (dev_priv, phy) || + dig_port->tc_mode !=TC_PORT_TBT_ALT ) + dig_port->ddi_io_wakeref =intel_display_power_get (dev_priv, + dig_port->ddi_io_power_domain); + +/* +* 5. The rest of the below are substeps under the bspec's "Enable and +* Train Display Port" step. Note that steps that are specific to +* MST will be handled by intel_mst_pre_enable_dp() before/after it +* calls into this function. Also intel_mst_pre_enable_dp() only calls +* us when active_mst_links==0, so any steps designated for "single +* stream or multi-stream master transcoder" can just be performed +* unconditionally here. +*/ + +/* +* 5.a Configure Transcoder Clock Select to direct the Port clock to the +* Transcoder. +*/ +intel_ddi_enable_pipe_clock (encoder, crtc_state); + +/* 5.b Not relevant to i915 for now */ + +/* +* 5.c Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST +* Transport Select +*/ +intel_ddi_config_transcoder_func (encoder, crtc_state); + +/* +* 5.d Configure & enable DP_TP_CTL with link training pattern 1 +* selected +* +* This will be handled by the intel_dp_start_link_train() farther +* down this function. +*/ + +/* 5.e Configure voltage swing and related IO settings */ +intel_snps_phy_ddi_vswing_sequence (encoder, level); + +/* +* 5.f Configure and enable DDI_BUF_CTL +* 5.g Wait for DDI_BUF_CTL DDI Idle Status = 0b (Not Idle), timeout +* after 1200 us. +* +* We only configure what the register value will be here. Actual +* enabling happens during link training farther down. +*/ +intel_ddi_init_dp_buf_reg (encoder, crtc_state); + +if (!is_mst) +intel_dp_set_power (intel_dp,DP_SET_POWER_D0 ); + +intel_dp_sink_set_decompression_state (intel_dp, crtc_state, true); +/* +* DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit +* in the FEC_CONFIGURATION register to 1 before initiating link +* training +*/ +intel_dp_sink_set_fec_ready (intel_dp, crtc_state); + +/* +* 5.h Follow DisplayPort specification training sequence (see notes for +* failure handling) +* 5.i If DisplayPort multi-stream - Set DP_TP_CTL link training to Idle +* Pattern, wait for 5 idle patterns (DP_TP_STATUS Min_Idles_Sent) +* (timeout after 800 us) +*/ +intel_dp_start_link_train (intel_dp, crtc_state); + +/* 5.j Set DP_TP_CTL link training to Normal */ +if (!is_trans_port_sync_mode (crtc_state)) +intel_dp_stop_link_train (intel_dp, crtc_state); + +/* 5.k Configure and enable FEC if needed */ +intel_ddi_enable_fec (encoder, crtc_state); +intel_dsc_enable (encoder, crtc_state); +} + static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state,
@@ -2573,10 +2687,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,*/ /* 7.e Configure voltage swing and related IO settings */ -if (IS_DG2 (dev_priv)) -intel_snps_phy_ddi_vswing_sequence (encoder, level); -else -tgl_ddi_vswing_sequence (encoder, crtc_state, level); +tgl_ddi_vswing_sequence (encoder, crtc_state, level);/* * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up
@@ -2708,7 +2819,9 @@ static void intel_ddi_pre_enable_dp(struct intel_atomic_state *state, {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); -if (DISPLAY_VER (dev_priv) >=12 ) +if (IS_DG2 (dev_priv)) +dg2_ddi_pre_enable_dp (state, encoder, crtc_state, conn_state); +else if (DISPLAY_VER (dev_priv) >=12 )tgl_ddi_pre_enable_dp (state, encoder, crtc_state, conn_state);else hsw_ddi_pre_enable_dp (state, encoder, crtc_state, conn_state);
@@ -4634,6 +4747,8 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port) encoder->pipe_mask = ~0 ;if (IS_DG2 (dev_priv)) { + encoder->enable_clock = intel_mpllb_enable; + encoder->disable_clock = intel_mpllb_disable; encoder->get_config = dg2_ddi_get_config; }else if (IS_ALDERLAKE_S (dev_priv)) { encoder->enable_clock = adls_ddi_enable_clock;
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 27/30 drm/i915/dg2: Wait for SNPS PHY calibration during display init
In reply to Matt RoperInitialization of the PHY is handled by the hardware/firmware, but the driver should wait up to 25ms for the PHY to report that its calibration has completed.
Bspec: 49189
Bspec: 50107
--- .../gpu/drm/i915/display/intel_display_power.c | 5 +++++ drivers/gpu/drm/i915/display/intel_snps_phy.c | 15 +++++++++++++++ drivers/gpu/drm/i915/display/intel_snps_phy.h | 3 +++ drivers/gpu/drm/i915/i915_reg.h | 1 + 4 files changed, 24 insertions(+)
drivers/gpu/drm/i915/display/intel_display_power.c +5 -0
@@ -18,6 +18,7 @@#include "intel_pm.h" #include "intel_pps.h" #include "intel_sideband.h" +#include "intel_snps_phy.h" #include "intel_tc.h" #include "intel_vga.h"
@@ -5901,6 +5902,10 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,if (DISPLAY_VER (dev_priv) >=12 )tgl_bw_buddy_init (dev_priv); +/* 8. Ensure PHYs have completed calibration and adaptation */ +if (IS_DG2 (dev_priv)) +intel_snps_phy_wait_for_calibration (dev_priv); +if (resume &&intel_dmc_has_payload (dev_priv))intel_dmc_load_program (dev_priv);
drivers/gpu/drm/i915/display/intel_snps_phy.c +15 -0
@@ -21,6 +21,21 @@* since it is not handled by the shared DPLL framework as on other platforms. */ +void intel_snps_phy_wait_for_calibration (struct drm_i915_private *dev_priv) +{ +enum phy phy; + +for_each_phy_masked (phy, ~0 ) { +if (!intel_phy_is_snps (dev_priv, phy)) +continue ; + +if (intel_de_wait_for_clear (dev_priv,ICL_PHY_MISC (phy), +DG2_PHY_DP_TX_ACK_MASK ,25 )) +DRM_ERROR ("SNPS PHY %c failed to calibrate after 25ms.\n" , + phy); + } +} +static const u32 dg2_ddi_translations[] = {/* VS 0, pre-emph 0 */ REG_FIELD_PREP (SNPS_PHY_TX_EQ_MAIN ,26 ),
drivers/gpu/drm/i915/display/intel_snps_phy.h +3 -0
@@ -8,10 +8,13 @@#include <linux/types.h> +struct drm_i915_private ;struct intel_encoder ;struct intel_crtc_state ;struct intel_mpllb_state ; +void intel_snps_phy_wait_for_calibration (struct drm_i915_private *dev_priv); +int intel_mpllb_calc_state (struct intel_crtc_state *crtc_state,struct intel_encoder *encoder); void intel_mpllb_enable(struct intel_encoder *encoder,
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -12461,6 +12461,7 @@ enum skl_power_gate { _ICL_PHY_MISC_B)#define ICL_PHY_MISC_MUX_DDID (1 << 28)#define ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN (1 << 23) +#define DG2_PHY_DP_TX_ACK_MASK REG_GENMASK(23, 20)/* Icelake Display Stream Compression Registers */ #define DSCA_PICTURE_PARAMETER_SET_0 _MMIO(0x6B200)
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
kernel test robot
build botRe: [Intel-gfx] [PATCH v3 27/30] drm/i915/dg2: Wait for SNPS PHY calibration during display init
Thank you for the patch! Yet something to improve:
Hi Matt,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on drm-tip/drm-tip]
[cannot apply to drm-intel/for-linux-next v5.14-rc2 next-20210723] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Matt-Roper/Begin-enabling-Xe_HP-SDV-and-DG2-platforms/20210724-014624 base: git://anongit.freedesktop.org/drm/drm-tip drm-tip config: x86_64-randconfig-r036-20210723 (attached as .config) compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 9625ca5b602616b2f5584e8a49ba93c52c141e40)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/a68b2ebea61d2fe5e32ee5bbc975bc0ed5f507de
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Matt-Roper/Begin-enabling-Xe_HP-SDV-and-DG2-platforms/20210724-014624 git checkout a68b2ebea61d2fe5e32ee5bbc975bc0ed5f507de
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
>> drivers/gpu/drm/i915/display/intel_snps_phy.c:29:8: error: implicit declaration of function 'intel_phy_is_snps' [-Werror,-Wimplicit-function-declaration]
if (!intel_phy_is_snps(dev_priv, phy))
^
drivers/gpu/drm/i915/display/intel_snps_phy.c:29:8: note: did you mean 'intel_phy_is_tc'?
drivers/gpu/drm/i915/display/intel_display.h:563:6: note: 'intel_phy_is_tc' declared here
bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy);
^1 error generated.
vim +/intel_phy_is_snps +29 drivers/gpu/drm/i915/display/intel_snps_phy.c
11
12 /**
13 * DOC: Synopsis PHY support
14 *
15 * Synopsis PHYs are primarily programmed by looking up magic register values
16 * in tables rather than calculating the necessary values at runtime.
17 *
18 * Of special note is that the SNPS PHYs include a dedicated port PLL, known as
19 * an "MPLLB." The MPLLB replaces the shared DPLL functionality used on other
20 * platforms and must be programming directly during the modeset sequence
21 * since it is not handled by the shared DPLL framework as on other platforms.
22 */
23
24 void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv)
25 {
26 enum phy phy;
27
28 for_each_phy_masked(phy, ~0) {
> 29 if (!intel_phy_is_snps(dev_priv, phy))
30 continue;
31
32 if (intel_de_wait_for_clear(dev_priv, ICL_PHY_MISC(phy),
33 DG2_PHY_DP_TX_ACK_MASK, 25))
34 DRM_ERROR("SNPS PHY %c failed to calibrate after 25ms.\n",
35 phy);
36 }
37 }
38 ---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
PATCH v3 28/30 drm/i915/dg2: Update lane disable power state during PSR
In reply to Matt RoperFrom: Gwan-gyeong Mun <[email protected]>
The PSR enable/disable sequences now require that we program an extra register in the PHY to adjust the lane disable power setting.
Bspec: 49274
Bspec: 53885
--- drivers/gpu/drm/i915/display/intel_psr.c | 7 +++++++ drivers/gpu/drm/i915/display/intel_snps_phy.c | 14 ++++++++++++++ drivers/gpu/drm/i915/display/intel_snps_phy.h | 3 +++ drivers/gpu/drm/i915/i915_reg.h | 3 +++ 4 files changed, 27 insertions(+)
drivers/gpu/drm/i915/display/intel_psr.c +7 -0
@@ -32,6 +32,7 @@#include "intel_dp_aux.h" #include "intel_hdmi.h" #include "intel_psr.h" +#include "intel_snps_phy.h" #include "intel_sprite.h" #include "skl_universal_plane.h"
@@ -1212,6 +1213,7 @@ static void intel_psr_enable_locked(struct intel_dp *intel_dp, {struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp);struct drm_i915_private *dev_priv =dp_to_i915 (intel_dp); +enum phy phy =intel_port_to_phy (dev_priv, dig_port->base.port);struct intel_encoder *encoder = &dig_port->base;u32 val;
@@ -1237,6 +1239,7 @@ static void intel_psr_enable_locked(struct intel_dp *intel_dp,intel_dp_compute_psr_vsc_sdp (intel_dp, crtc_state, conn_state, &intel_dp->psr.vsc);intel_write_dp_vsc_sdp (encoder, crtc_state, &intel_dp->psr.vsc); +intel_snps_phy_update_psr_power_state (dev_priv, phy, true);intel_psr_enable_sink (intel_dp);intel_psr_enable_source (intel_dp); intel_dp->psr.enabled = true;
@@ -1333,6 +1336,8 @@ static void intel_psr_wait_exit_locked(struct intel_dp *intel_dp)static void intel_psr_disable_locked (struct intel_dp *intel_dp) {struct drm_i915_private *dev_priv =dp_to_i915 (intel_dp); +enum phy phy =intel_port_to_phy (dev_priv, +dp_to_dig_port (intel_dp)->base.port);lockdep_assert_held (&intel_dp->psr.lock);
@@ -1358,6 +1363,8 @@ static void intel_psr_disable_locked(struct intel_dp *intel_dp)TRANS_SET_CONTEXT_LATENCY (intel_dp->psr.transcoder), TRANS_SET_CONTEXT_LATENCY_MASK, 0); +intel_snps_phy_update_psr_power_state (dev_priv, phy, false); +/* Disable PSR on Sink */ drm_dp_dpcd_writeb (&intel_dp->aux,DP_PSR_EN_CFG ,0 );
drivers/gpu/drm/i915/display/intel_snps_phy.c +14 -0
@@ -36,6 +36,20 @@ void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv) } } +void intel_snps_phy_update_psr_power_state (struct drm_i915_private *dev_priv, +enum phy phy,bool enable) +{ +u32 val; + +if (!intel_phy_is_snps (dev_priv, phy)) +return ; + + val =REG_FIELD_PREP (SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR , + enable ?2 :3 ); +intel_uncore_rmw (&dev_priv->uncore,SNPS_PHY_TX_REQ (phy), +SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR , val); +} +static const u32 dg2_ddi_translations[] = {/* VS 0, pre-emph 0 */ REG_FIELD_PREP (SNPS_PHY_TX_EQ_MAIN ,26 ),
drivers/gpu/drm/i915/display/intel_snps_phy.h +3 -0
@@ -12,8 +12,11 @@ struct drm_i915_private;struct intel_encoder ;struct intel_crtc_state ;struct intel_mpllb_state ; +enum phy ;void intel_snps_phy_wait_for_calibration (struct drm_i915_private *dev_priv); +void intel_snps_phy_update_psr_power_state (struct drm_i915_private *dev_priv, +enum phy phy,bool enable);int intel_mpllb_calc_state (struct intel_crtc_state *crtc_state,struct intel_encoder *encoder);
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -2340,6 +2340,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define SNPS_PHY_REF_CONTROL (phy) _MMIO_SNPS(phy, 0x168188)#define SNPS_PHY_REF_CONTROL_REF_RANGE REG_GENMASK(31, 27) +#define SNPS_PHY_TX_REQ (phy) _MMIO_SNPS(phy, 0x168200) +#define SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR REG_GENMASK(31, 30) +#define SNPS_PHY_TX_EQ (ln, phy) _MMIO_SNPS_LN(ln, phy, 0x168300)#define SNPS_PHY_TX_EQ_MAIN REG_GENMASK(23, 18)#define SNPS_PHY_TX_EQ_POST REG_GENMASK(15, 10)
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 29/30 drm/i915/dg2: Update to bigjoiner path
In reply to Matt RoperFrom: Animesh Manna <[email protected]>
In verify_mpllb_state() encoder is retrieved from best_encoder of connector_state. As there will be only one connector_state for bigjoiner and checking encoder may not be needed for bigjoiner-slave. This code path related to mpll is done on dg2 and need this fix to avoid null pointer dereference issue.
--- drivers/gpu/drm/i915/display/intel_display.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/display/intel_display.c +3 -0
@@ -9157,6 +9157,9 @@ verify_mpllb_state(struct intel_atomic_state *state,if (!new_crtc_state->hw.active)return ; +if (new_crtc_state->bigjoiner_slave) +return ; + encoder =intel_get_crtc_new_encoder (state, new_crtc_state);intel_mpllb_readout_hw_state (encoder, &mpllb_hw_state);
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 30/30 drm/i915/dg2: Configure PCON in DP pre-enable path
In reply to Matt RoperFrom: Ankit Nautiyal <[email protected]>
Add the functions to configure HDMI2.1 pcon for DG2, before DP link training.
--- drivers/gpu/drm/i915/display/intel_ddi.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/display/intel_ddi.c +3 -0
@@ -2576,6 +2576,7 @@ static void dg2_ddi_pre_enable_dp(struct intel_atomic_state *state,if (!is_mst)intel_dp_set_power (intel_dp,DP_SET_POWER_D0 ); +intel_dp_configure_protocol_converter (intel_dp, crtc_state);intel_dp_sink_set_decompression_state (intel_dp, crtc_state, true);/* * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit
@@ -2583,6 +2584,8 @@ static void dg2_ddi_pre_enable_dp(struct intel_atomic_state *state,* training */ intel_dp_sink_set_fec_ready (intel_dp, crtc_state); +intel_dp_check_frl_training (intel_dp); +intel_dp_pcon_dsc_configure (intel_dp, crtc_state);/* * 5.h Follow DisplayPort specification training sequence (see notes for
Signature · 6 lines
2.25.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Begin enabling Xe_HP SDV and DG2 platforms (rev6)
In reply to Matt Roper== Series Details ==
== Series Details ==
Series: Begin enabling Xe_HP SDV and DG2 platforms (rev6)
URL : https://patchwork.freedesktop.org/series/92135/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip f90c0193e566 drm/i915/xehpsdv: Correct parameters for IS_XEHPSDV_GT_STEP() -:24: CHECK:MACRO_ARG_REUSE: Macro argument reuse '__i915' - possible side-effects? #24: FILE: drivers/gpu/drm/i915/i915_drv.h:1565: +#define IS_XEHPSDV_GT_STEP(__i915, since, until) \ + (IS_XEHPSDV(__i915) && IS_GT_STEP(__i915, since, until))
total: 0 errors, 0 warnings, 1 checks, 10 lines checked 42a1f6157116 drm/i915/xehp: Extra media engines - Part 1 (engine definitions) 3f65d319057d drm/i915/xehp: Extra media engines - Part 2 (interrupts) 25bc3daa002b drm/i915/xehp: Extra media engines - Part 3 (reset) 2b3f9bef9095 drm/i915/xehp: Xe_HP forcewake support
-:10: WARNING:BAD_SIGN_OFF: Non-standard signature: Co-authored-by:
#10:
-:26: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #26: FILE: drivers/gpu/drm/i915/gt/intel_execlists_submission.c:3362:
+ engine->fw_domain = intel_uncore_forcewake_for_reg(engine->uncore,
+ RING_EXECLIST_CONTROL(engine->mmio_base),
-:209: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #209: FILE: drivers/gpu/drm/i915/intel_uncore.c:1323:
+ GEN_FW_RANGE(0x0, 0x1fff, 0), /*
+ 0x0 - 0xaff: reserved
-:210: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #210: FILE: drivers/gpu/drm/i915/intel_uncore.c:1324:
+ 0xb00 - 0x1fff: always on */
-:214: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #214: FILE: drivers/gpu/drm/i915/intel_uncore.c:1328:
+ GEN_FW_RANGE(0x4b00, 0x51ff, 0), /*
+ 0x4b00 - 0x4fff: reserved
-:215: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #215: FILE: drivers/gpu/drm/i915/intel_uncore.c:1329:
+ 0x5000 - 0x51ff: always on */
-:220: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #220: FILE: drivers/gpu/drm/i915/intel_uncore.c:1334:
+ GEN_FW_RANGE(0x8160, 0x81ff, 0), /*
+ 0x8160 - 0x817f: reserved
-:221: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #221: FILE: drivers/gpu/drm/i915/intel_uncore.c:1335:
+ 0x8180 - 0x81ff: always on */
-:225: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #225: FILE: drivers/gpu/drm/i915/intel_uncore.c:1339:
+ GEN_FW_RANGE(0x8500, 0x94cf, FORCEWAKE_GT), /*
+ 0x8500 - 0x87ff: gt
-:228: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #228: FILE: drivers/gpu/drm/i915/intel_uncore.c:1342:
+ 0x9480 - 0x94cf: reserved */
-:231: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #231: FILE: drivers/gpu/drm/i915/intel_uncore.c:1345:
+ GEN_FW_RANGE(0x9560, 0x97ff, 0), /*
+ 0x9560 - 0x95ff: always on
-:232: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #232: FILE: drivers/gpu/drm/i915/intel_uncore.c:1346:
+ 0x9600 - 0x97ff: reserved */
-:234: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #234: FILE: drivers/gpu/drm/i915/intel_uncore.c:1348:
+ GEN_FW_RANGE(0x9800, 0xcfff, FORCEWAKE_GT), /*
+ 0x9800 - 0xb4ff: gt
-:236: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #236: FILE: drivers/gpu/drm/i915/intel_uncore.c:1350:
+ 0xc000 - 0xcfff: gt */
-:241: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #241: FILE: drivers/gpu/drm/i915/intel_uncore.c:1355:
+ GEN_FW_RANGE(0xdd00, 0xde7f, FORCEWAKE_GT), /*
+ 0xdd00 - 0xddff: gt
-:242: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #242: FILE: drivers/gpu/drm/i915/intel_uncore.c:1356:
+ 0xde00 - 0xde7f: reserved */
-:244: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #244: FILE: drivers/gpu/drm/i915/intel_uncore.c:1358:
+ GEN_FW_RANGE(0xde80, 0xe8ff, FORCEWAKE_RENDER), /*
+ 0xde80 - 0xdfff: render
-:246: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #246: FILE: drivers/gpu/drm/i915/intel_uncore.c:1360:
+ 0xe100 - 0xe8ff: render */
-:248: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #248: FILE: drivers/gpu/drm/i915/intel_uncore.c:1362:
+ GEN_FW_RANGE(0xe900, 0xffff, FORCEWAKE_GT), /*
+ 0xe900 - 0xe9ff: gt
-:250: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #250: FILE: drivers/gpu/drm/i915/intel_uncore.c:1364:
+ 0xf000 - 0xffff: gt */
-:252: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #252: FILE: drivers/gpu/drm/i915/intel_uncore.c:1366:
+ GEN_FW_RANGE(0x10000, 0x13fff, 0), /*
+ 0x10000 - 0x11fff: reserved
-:254: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #254: FILE: drivers/gpu/drm/i915/intel_uncore.c:1368:
+ 0x12800 - 0x13fff: reserved */
-:260: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #260: FILE: drivers/gpu/drm/i915/intel_uncore.c:1374:
+ GEN_FW_RANGE(0x14800, 0x1ffff, FORCEWAKE_RENDER), /*
+ 0x14800 - 0x14fff: render
-:262: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #262: FILE: drivers/gpu/drm/i915/intel_uncore.c:1376:
+ 0x16e00 - 0x1ffff: render */
-:264: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #264: FILE: drivers/gpu/drm/i915/intel_uncore.c:1378:
+ GEN_FW_RANGE(0x20000, 0x21fff, FORCEWAKE_MEDIA_VDBOX0), /*
+ 0x20000 - 0x20fff: VD0
-:265: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #265: FILE: drivers/gpu/drm/i915/intel_uncore.c:1379:
+ 0x21000 - 0x21fff: reserved */
-:268: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #268: FILE: drivers/gpu/drm/i915/intel_uncore.c:1382:
+ GEN_FW_RANGE(0x24000, 0x2417f, 0), /*
+ 0x24000 - 0x2407f: always on
-:269: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #269: FILE: drivers/gpu/drm/i915/intel_uncore.c:1383:
+ 0x24080 - 0x2417f: reserved */
-:271: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #271: FILE: drivers/gpu/drm/i915/intel_uncore.c:1385:
+ GEN_FW_RANGE(0x24180, 0x249ff, FORCEWAKE_GT), /*
+ 0x24180 - 0x241ff: gt
-:272: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #272: FILE: drivers/gpu/drm/i915/intel_uncore.c:1386:
+ 0x24200 - 0x249ff: reserved */
-:274: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #274: FILE: drivers/gpu/drm/i915/intel_uncore.c:1388:
+ GEN_FW_RANGE(0x24a00, 0x251ff, FORCEWAKE_RENDER), /*
+ 0x24a00 - 0x24a7f: render
-:275: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #275: FILE: drivers/gpu/drm/i915/intel_uncore.c:1389:
+ 0x24a80 - 0x251ff: reserved */
-:277: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #277: FILE: drivers/gpu/drm/i915/intel_uncore.c:1391:
+ GEN_FW_RANGE(0x25200, 0x25fff, FORCEWAKE_GT), /*
+ 0x25200 - 0x252ff: gt
-:278: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #278: FILE: drivers/gpu/drm/i915/intel_uncore.c:1392:
+ 0x25300 - 0x25fff: reserved */
-:280: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #280: FILE: drivers/gpu/drm/i915/intel_uncore.c:1394:
+ GEN_FW_RANGE(0x26000, 0x2ffff, FORCEWAKE_RENDER), /*
+ 0x26000 - 0x27fff: render
-:282: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #282: FILE: drivers/gpu/drm/i915/intel_uncore.c:1396:
+ 0x2a000 - 0x2ffff: undocumented */
-:286: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #286: FILE: drivers/gpu/drm/i915/intel_uncore.c:1400:
+ GEN_FW_RANGE(0x1c0000, 0x1c3fff, FORCEWAKE_MEDIA_VDBOX0), /*
+ 0x1c0000 - 0x1c2bff: VD0
-:290: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #290: FILE: drivers/gpu/drm/i915/intel_uncore.c:1404:
+ 0x1c3f00 - 0x1c3fff: VD0 */
-:292: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #292: FILE: drivers/gpu/drm/i915/intel_uncore.c:1406:
+ GEN_FW_RANGE(0x1c4000, 0x1c7fff, FORCEWAKE_MEDIA_VDBOX1), /*
+ 0x1c4000 - 0x1c6bff: VD1
-:295: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #295: FILE: drivers/gpu/drm/i915/intel_uncore.c:1409:
+ 0x1c6e00 - 0x1c7fff: reserved */
-:297: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #297: FILE: drivers/gpu/drm/i915/intel_uncore.c:1411:
+ GEN_FW_RANGE(0x1c8000, 0x1cbfff, FORCEWAKE_MEDIA_VEBOX0), /*
+ 0x1c8000 - 0x1ca0ff: VE0
-:298: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #298: FILE: drivers/gpu/drm/i915/intel_uncore.c:1412:
+ 0x1ca100 - 0x1cbfff: reserved */
-:304: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #304: FILE: drivers/gpu/drm/i915/intel_uncore.c:1418:
+ GEN_FW_RANGE(0x1d0000, 0x1d3fff, FORCEWAKE_MEDIA_VDBOX2), /*
+ 0x1d0000 - 0x1d2bff: VD2
-:308: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #308: FILE: drivers/gpu/drm/i915/intel_uncore.c:1422:
+ 0x1d3f00 - 0x1d3fff: VD2 */
-:310: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #310: FILE: drivers/gpu/drm/i915/intel_uncore.c:1424:
+ GEN_FW_RANGE(0x1d4000, 0x1d7fff, FORCEWAKE_MEDIA_VDBOX3), /*
+ 0x1d4000 - 0x1d6bff: VD3
-:313: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #313: FILE: drivers/gpu/drm/i915/intel_uncore.c:1427:
+ 0x1d6e00 - 0x1d7fff: reserved */
-:315: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #315: FILE: drivers/gpu/drm/i915/intel_uncore.c:1429:
+ GEN_FW_RANGE(0x1d8000, 0x1dffff, FORCEWAKE_MEDIA_VEBOX1), /*
+ 0x1d8000 - 0x1da0ff: VE1
-:316: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #316: FILE: drivers/gpu/drm/i915/intel_uncore.c:1430:
+ 0x1da100 - 0x1dffff: reserved */
-:318: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #318: FILE: drivers/gpu/drm/i915/intel_uncore.c:1432:
+ GEN_FW_RANGE(0x1e0000, 0x1e3fff, FORCEWAKE_MEDIA_VDBOX4), /*
+ 0x1e0000 - 0x1e2bff: VD4
-:322: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #322: FILE: drivers/gpu/drm/i915/intel_uncore.c:1436:
+ 0x1e3f00 - 0x1e3fff: VD4 */
-:324: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #324: FILE: drivers/gpu/drm/i915/intel_uncore.c:1438:
+ GEN_FW_RANGE(0x1e4000, 0x1e7fff, FORCEWAKE_MEDIA_VDBOX5), /*
+ 0x1e4000 - 0x1e6bff: VD5
-:327: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #327: FILE: drivers/gpu/drm/i915/intel_uncore.c:1441:
+ 0x1e6e00 - 0x1e7fff: reserved */
-:329: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #329: FILE: drivers/gpu/drm/i915/intel_uncore.c:1443:
+ GEN_FW_RANGE(0x1e8000, 0x1effff, FORCEWAKE_MEDIA_VEBOX2), /*
+ 0x1e8000 - 0x1ea0ff: VE2
-:330: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #330: FILE: drivers/gpu/drm/i915/intel_uncore.c:1444:
+ 0x1ea100 - 0x1effff: reserved */
-:332: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #332: FILE: drivers/gpu/drm/i915/intel_uncore.c:1446:
+ GEN_FW_RANGE(0x1f0000, 0x1f3fff, FORCEWAKE_MEDIA_VDBOX6), /*
+ 0x1f0000 - 0x1f2bff: VD6
-:336: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #336: FILE: drivers/gpu/drm/i915/intel_uncore.c:1450:
+ 0x1f3f00 - 0x1f3fff: VD6 */
-:338: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #338: FILE: drivers/gpu/drm/i915/intel_uncore.c:1452:
+ GEN_FW_RANGE(0x1f4000, 0x1f7fff, FORCEWAKE_MEDIA_VDBOX7), /*
+ 0x1f4000 - 0x1f6bff: VD7
-:341: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #341: FILE: drivers/gpu/drm/i915/intel_uncore.c:1455:
+ 0x1f6e00 - 0x1f7fff: reserved */
total: 0 errors, 57 warnings, 1 checks, 467 lines checked 70b1a7998cf4 drm/i915/xehp: handle new steering options
-:51: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #51: FILE: drivers/gpu/drm/i915/gt/intel_gt.c:117:
+ if (GRAPHICS_VER(gt->i915) >= 11 &&
+ GRAPHICS_VER_FULL(gt->i915) < IP_VER(12, 50)) {
-:195: WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned' #195: FILE: drivers/gpu/drm/i915/gt/intel_workarounds.c:892:
+ unsigned slice, unsigned subslice)
-:195: WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned' #195: FILE: drivers/gpu/drm/i915/gt/intel_workarounds.c:892:
+ unsigned slice, unsigned subslice)
total: 0 errors, 2 warnings, 1 checks, 282 lines checked21933a40845a drm/i915/xehp: Loop over all gslices for INSTDONE processing -:135: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'iter_' - possible side-effects? #135: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:579:
+#define for_each_instdone_gslice_dss_xehp(dev_priv_, sseu_, iter_, gslice_, dss_) \
+ for ((iter_) = 0, (gslice_) = 0, (dss_) = 0; \
+ (iter_) < GEN_MAX_SUBSLICES; \ + (iter_)++, (gslice_) = (iter_) / GEN_DSS_PER_GSLICE, \ + (dss_) = (iter_) % GEN_DSS_PER_GSLICE) \
+ for_each_if(intel_sseu_has_subslice((sseu_), 0, (iter_)))
-:135: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'gslice_' - possible side-effects? #135: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:579:
+#define for_each_instdone_gslice_dss_xehp(dev_priv_, sseu_, iter_, gslice_, dss_) \
+ for ((iter_) = 0, (gslice_) = 0, (dss_) = 0; \
+ (iter_) < GEN_MAX_SUBSLICES; \ + (iter_)++, (gslice_) = (iter_) / GEN_DSS_PER_GSLICE, \ + (dss_) = (iter_) % GEN_DSS_PER_GSLICE) \
+ for_each_if(intel_sseu_has_subslice((sseu_), 0, (iter_)))
-:135: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'dss_' - possible side-effects? #135: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:579:
+#define for_each_instdone_gslice_dss_xehp(dev_priv_, sseu_, iter_, gslice_, dss_) \
+ for ((iter_) = 0, (gslice_) = 0, (dss_) = 0; \
+ (iter_) < GEN_MAX_SUBSLICES; \ + (iter_)++, (gslice_) = (iter_) / GEN_DSS_PER_GSLICE, \ + (dss_) = (iter_) % GEN_DSS_PER_GSLICE) \
+ for_each_if(intel_sseu_has_subslice((sseu_), 0, (iter_)))
total: 0 errors, 0 warnings, 3 checks, 164 lines checked 456e57370fcd drm/i915/xehp: Changes to ss/eu definitions 94a690b2b730 drm/i915/xehpsdv: Add maximum sseu limits 278d359e56da drm/i915/xehpsdv: Add compute DSS type0a73f890d107 drm/i915/xehpsdv: Define steering tables 3def48fb4238 drm/i915/xehpsdv: Define MOCS table for XeHP SDV 83b0be478cb4 drm/i915/xehpsdv: factor out function to read RP_STATE_CAP da9489e90eda drm/i915/xehpsdv: Read correct RP_STATE_CAP register 4057f5104c28 drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV 1ace9a8d1b2a drm/i915/dg2: Add forcewake table
-:178: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #178: FILE: drivers/gpu/drm/i915/intel_uncore.c:1328:
+ GEN_FW_RANGE(0x0, 0x1fff, 0), /* \
+ 0x0 - 0xaff: reserved \
-:179: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #179: FILE: drivers/gpu/drm/i915/intel_uncore.c:1329:
+ 0xb00 - 0x1fff: always on */ \
-:183: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #183: FILE: drivers/gpu/drm/i915/intel_uncore.c:1333:
+ GEN_FW_RANGE(0x4b00, 0x51ff, 0), /* \
+ 0x4b00 - 0x4fff: reserved \
-:184: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #184: FILE: drivers/gpu/drm/i915/intel_uncore.c:1334:
+ 0x5000 - 0x51ff: always on */ \
-:189: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #189: FILE: drivers/gpu/drm/i915/intel_uncore.c:1339:
+ GEN_FW_RANGE(0x8160, 0x81ff, 0), /* \
+ 0x8160 - 0x817f: reserved \
-:190: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #190: FILE: drivers/gpu/drm/i915/intel_uncore.c:1340:
+ 0x8180 - 0x81ff: always on */ \
-:194: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #194: FILE: drivers/gpu/drm/i915/intel_uncore.c:1344:
+ GEN_FW_RANGE(0x8500, 0x8cff, FORCEWAKE_GT), /* \
+ 0x8500 - 0x87ff: gt \
-:196: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #196: FILE: drivers/gpu/drm/i915/intel_uncore.c:1346:
+ 0x8c80 - 0x8cff: gt (DG2 only) */ \
-:198: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #198: FILE: drivers/gpu/drm/i915/intel_uncore.c:1348:
+ GEN_FW_RANGE(0x8d00, 0x8fff, FORCEWAKE_RENDER), /* \
+ 0x8d00 - 0x8dff: render (DG2 only) \
-:199: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #199: FILE: drivers/gpu/drm/i915/intel_uncore.c:1349:
+ 0x8e00 - 0x8fff: reserved */ \
-:201: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #201: FILE: drivers/gpu/drm/i915/intel_uncore.c:1351:
+ GEN_FW_RANGE(0x9000, 0x94cf, FORCEWAKE_GT), /* \
+ 0x9000 - 0x947f: gt \
-:202: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #202: FILE: drivers/gpu/drm/i915/intel_uncore.c:1352:
+ 0x9480 - 0x94cf: reserved */ \
-:205: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #205: FILE: drivers/gpu/drm/i915/intel_uncore.c:1355:
+ GEN_FW_RANGE(0x9560, 0x967f, 0), /* \
+ 0x9560 - 0x95ff: always on \
-:206: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #206: FILE: drivers/gpu/drm/i915/intel_uncore.c:1356:
+ 0x9600 - 0x967f: reserved */ \
-:208: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #208: FILE: drivers/gpu/drm/i915/intel_uncore.c:1358:
+ GEN_FW_RANGE(0x9680, 0x97ff, FORCEWAKE_RENDER), /* \
+ 0x9680 - 0x96ff: render (DG2 only) \
-:209: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #209: FILE: drivers/gpu/drm/i915/intel_uncore.c:1359:
+ 0x9700 - 0x97ff: reserved */ \
-:211: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #211: FILE: drivers/gpu/drm/i915/intel_uncore.c:1361:
+ GEN_FW_RANGE(0x9800, 0xcfff, FORCEWAKE_GT), /* \
+ 0x9800 - 0xb4ff: gt \
-:213: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #213: FILE: drivers/gpu/drm/i915/intel_uncore.c:1363:
+ 0xc000 - 0xcfff: gt */ \
-:219: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #219: FILE: drivers/gpu/drm/i915/intel_uncore.c:1369:
+ GEN_FW_RANGE(0xdd00, 0xde7f, FORCEWAKE_GT), /* \
+ 0xdd00 - 0xddff: gt \
-:220: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #220: FILE: drivers/gpu/drm/i915/intel_uncore.c:1370:
+ 0xde00 - 0xde7f: reserved */ \
-:222: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #222: FILE: drivers/gpu/drm/i915/intel_uncore.c:1372:
+ GEN_FW_RANGE(0xde80, 0xe8ff, FORCEWAKE_RENDER), /* \
+ 0xde80 - 0xdfff: render \
-:224: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #224: FILE: drivers/gpu/drm/i915/intel_uncore.c:1374:
+ 0xe100 - 0xe8ff: render */ \
-:226: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #226: FILE: drivers/gpu/drm/i915/intel_uncore.c:1376:
+ GEN_FW_RANGE(0xe900, 0xffff, FORCEWAKE_GT), /* \
+ 0xe900 - 0xe9ff: gt \
-:228: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #228: FILE: drivers/gpu/drm/i915/intel_uncore.c:1378:
+ 0xf000 - 0xffff: gt */ \
-:230: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #230: FILE: drivers/gpu/drm/i915/intel_uncore.c:1380:
+ GEN_FW_RANGE(0x10000, 0x12fff, 0), /* \
+ 0x10000 - 0x11fff: reserved \
-:232: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #232: FILE: drivers/gpu/drm/i915/intel_uncore.c:1382:
+ 0x12800 - 0x12fff: reserved */ \
-:235: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #235: FILE: drivers/gpu/drm/i915/intel_uncore.c:1385:
+ GEN_FW_RANGE(0x13200, 0x13fff, FORCEWAKE_MEDIA_VDBOX2), /* \
+ 0x13200 - 0x133ff: VD2 (DG2 only) \
-:236: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #236: FILE: drivers/gpu/drm/i915/intel_uncore.c:1386:
+ 0x13400 - 0x13fff: reserved */ \
-:243: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #243: FILE: drivers/gpu/drm/i915/intel_uncore.c:1393:
+ GEN_FW_RANGE(0x15000, 0x16dff, FORCEWAKE_GT), /* \
+ 0x15000 - 0x15fff: gt (DG2 only) \
-:244: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #244: FILE: drivers/gpu/drm/i915/intel_uncore.c:1394:
+ 0x16000 - 0x16dff: reserved */ \
-:247: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #247: FILE: drivers/gpu/drm/i915/intel_uncore.c:1397:
+ GEN_FW_RANGE(0x20000, 0x21fff, FORCEWAKE_MEDIA_VDBOX0), /* \
+ 0x20000 - 0x20fff: VD0 (XEHPSDV only) \
-:248: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #248: FILE: drivers/gpu/drm/i915/intel_uncore.c:1398:
+ 0x21000 - 0x21fff: reserved */ \
-:251: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #251: FILE: drivers/gpu/drm/i915/intel_uncore.c:1401:
+ GEN_FW_RANGE(0x24000, 0x2417f, 0), /* \
+ 0x24000 - 0x2407f: always on \
-:252: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #252: FILE: drivers/gpu/drm/i915/intel_uncore.c:1402:
+ 0x24080 - 0x2417f: reserved */ \
-:254: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #254: FILE: drivers/gpu/drm/i915/intel_uncore.c:1404:
+ GEN_FW_RANGE(0x24180, 0x249ff, FORCEWAKE_GT), /* \
+ 0x24180 - 0x241ff: gt \
-:255: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #255: FILE: drivers/gpu/drm/i915/intel_uncore.c:1405:
+ 0x24200 - 0x249ff: reserved */ \
-:257: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #257: FILE: drivers/gpu/drm/i915/intel_uncore.c:1407:
+ GEN_FW_RANGE(0x24a00, 0x251ff, FORCEWAKE_RENDER), /* \
+ 0x24a00 - 0x24a7f: render \
-:258: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #258: FILE: drivers/gpu/drm/i915/intel_uncore.c:1408:
+ 0x24a80 - 0x251ff: reserved */ \
-:260: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #260: FILE: drivers/gpu/drm/i915/intel_uncore.c:1410:
+ GEN_FW_RANGE(0x25200, 0x25fff, FORCEWAKE_GT), /* \
+ 0x25200 - 0x252ff: gt \
-:261: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #261: FILE: drivers/gpu/drm/i915/intel_uncore.c:1411:
+ 0x25300 - 0x25fff: reserved */ \
-:263: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #263: FILE: drivers/gpu/drm/i915/intel_uncore.c:1413:
+ GEN_FW_RANGE(0x26000, 0x2ffff, FORCEWAKE_RENDER), /* \
+ 0x26000 - 0x27fff: render \
-:265: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #265: FILE: drivers/gpu/drm/i915/intel_uncore.c:1415:
+ 0x2a000 - 0x2ffff: undocumented */ \
-:269: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #269: FILE: drivers/gpu/drm/i915/intel_uncore.c:1419:
+ GEN_FW_RANGE(0x1c0000, 0x1c3fff, FORCEWAKE_MEDIA_VDBOX0), /* \
+ 0x1c0000 - 0x1c2bff: VD0 \
-:273: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #273: FILE: drivers/gpu/drm/i915/intel_uncore.c:1423:
+ 0x1c3f00 - 0x1c3fff: VD0 */ \
-:275: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #275: FILE: drivers/gpu/drm/i915/intel_uncore.c:1425:
+ GEN_FW_RANGE(0x1c4000, 0x1c7fff, FORCEWAKE_MEDIA_VDBOX1), /* \
+ 0x1c4000 - 0x1c6bff: VD1 \
-:278: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #278: FILE: drivers/gpu/drm/i915/intel_uncore.c:1428:
+ 0x1c6e00 - 0x1c7fff: reserved */ \
-:280: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #280: FILE: drivers/gpu/drm/i915/intel_uncore.c:1430:
+ GEN_FW_RANGE(0x1c8000, 0x1cbfff, FORCEWAKE_MEDIA_VEBOX0), /* \
+ 0x1c8000 - 0x1ca0ff: VE0 \
-:281: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #281: FILE: drivers/gpu/drm/i915/intel_uncore.c:1431:
+ 0x1ca100 - 0x1cbfff: reserved */ \
-:287: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #287: FILE: drivers/gpu/drm/i915/intel_uncore.c:1437:
+ GEN_FW_RANGE(0x1d0000, 0x1d3fff, FORCEWAKE_MEDIA_VDBOX2), /* \
+ 0x1d0000 - 0x1d2bff: VD2 \
-:292: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #292: FILE: drivers/gpu/drm/i915/intel_uncore.c:1442:
+ 0x1d3f00 - 0x1d3fff: VD2 */ \
-:294: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #294: FILE: drivers/gpu/drm/i915/intel_uncore.c:1444:
+ GEN_FW_RANGE(0x1d4000, 0x1d7fff, FORCEWAKE_MEDIA_VDBOX3), /* \
+ 0x1d4000 - 0x1d6bff: VD3 \
-:297: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #297: FILE: drivers/gpu/drm/i915/intel_uncore.c:1447:
+ 0x1d6e00 - 0x1d7fff: reserved */ \
-:299: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #299: FILE: drivers/gpu/drm/i915/intel_uncore.c:1449:
+ GEN_FW_RANGE(0x1d8000, 0x1dffff, FORCEWAKE_MEDIA_VEBOX1), /* \
+ 0x1d8000 - 0x1da0ff: VE1 \
-:300: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #300: FILE: drivers/gpu/drm/i915/intel_uncore.c:1450:
+ 0x1da100 - 0x1dffff: reserved */ \
-:302: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #302: FILE: drivers/gpu/drm/i915/intel_uncore.c:1452:
+ GEN_FW_RANGE(0x1e0000, 0x1e3fff, FORCEWAKE_MEDIA_VDBOX4), /* \
+ 0x1e0000 - 0x1e2bff: VD4 \
-:306: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #306: FILE: drivers/gpu/drm/i915/intel_uncore.c:1456:
+ 0x1e3f00 - 0x1e3fff: VD4 */ \
-:308: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #308: FILE: drivers/gpu/drm/i915/intel_uncore.c:1458:
+ GEN_FW_RANGE(0x1e4000, 0x1e7fff, FORCEWAKE_MEDIA_VDBOX5), /* \
+ 0x1e4000 - 0x1e6bff: VD5 \
-:311: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #311: FILE: drivers/gpu/drm/i915/intel_uncore.c:1461:
+ 0x1e6e00 - 0x1e7fff: reserved */ \
-:313: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #313: FILE: drivers/gpu/drm/i915/intel_uncore.c:1463:
+ GEN_FW_RANGE(0x1e8000, 0x1effff, FORCEWAKE_MEDIA_VEBOX2), /* \
+ 0x1e8000 - 0x1ea0ff: VE2 \
-:314: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #314: FILE: drivers/gpu/drm/i915/intel_uncore.c:1464:
+ 0x1ea100 - 0x1effff: reserved */ \
-:316: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #316: FILE: drivers/gpu/drm/i915/intel_uncore.c:1466:
+ GEN_FW_RANGE(0x1f0000, 0x1f3fff, FORCEWAKE_MEDIA_VDBOX6), /* \
+ 0x1f0000 - 0x1f2bff: VD6 \
-:320: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #320: FILE: drivers/gpu/drm/i915/intel_uncore.c:1470:
+ 0x1f3f00 - 0x1f3fff: VD6 */ \
-:322: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #322: FILE: drivers/gpu/drm/i915/intel_uncore.c:1472:
+ GEN_FW_RANGE(0x1f4000, 0x1f7fff, FORCEWAKE_MEDIA_VDBOX7), /* \
+ 0x1f4000 - 0x1f6bff: VD7 \
-:325: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #325: FILE: drivers/gpu/drm/i915/intel_uncore.c:1475:
+ 0x1f6e00 - 0x1f7fff: reserved */ \
total: 0 errors, 64 warnings, 0 checks, 318 lines checked134cfcfd9c84 drm/i915/dg2: Update LNCF steering rangesf7b8d3a066bf drm/i915/dg2: Add SQIDI steeringe1706eba9559 drm/i915/dg2: Add new LRI reg offsets9542a06a5a35 drm/i915/dg2: Maintain backward-compatible nested batch behavior 6a189a7ddf4d drm/i915/dg2: Report INSTDONE_GEOM values in error statea4f5ef996270 drm/i915/dg2: Define MOCS table for DG22f1319f28f47 drm/i915/dg2: Add MPLLB programming for SNPS PHY
-:110: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #110:
new file mode 100644
total: 0 errors, 1 warnings, 0 checks, 671 lines checked ba80b83c84a9 drm/i915/dg2: Add MPLLB programming for HDMI -:33: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #33: FILE: drivers/gpu/drm/i915/display/intel_ddi.c:3750:
+static void dg2_ddi_get_config(struct intel_encoder *encoder,
+ struct intel_crtc_state *crtc_state)
-:82: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'name' - possible side-effects? #82: FILE: drivers/gpu/drm/i915/display/intel_display.c:9163:
+#define MPLLB_CHECK(name) do { \
+ if (mpllb_sw_state->name != mpllb_hw_state.name) { \
+ pipe_config_mismatch(false, crtc, "MPLLB:" __stringify(name), \
+ "(expected 0x%08x, found 0x%08x)", \ + mpllb_sw_state->name, \ + mpllb_hw_state.name); \
+ } \
+} while (0)
-:82: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'name' may be better as '(name)' to avoid precedence issues #82: FILE: drivers/gpu/drm/i915/display/intel_display.c:9163:
+#define MPLLB_CHECK(name) do { \
+ if (mpllb_sw_state->name != mpllb_hw_state.name) { \
+ pipe_config_mismatch(false, crtc, "MPLLB:" __stringify(name), \
+ "(expected 0x%08x, found 0x%08x)", \ + mpllb_sw_state->name, \ + mpllb_hw_state.name); \
+ } \
+} while (0)
total: 0 errors, 0 warnings, 3 checks, 459 lines checked b1efd88312b8 drm/i915/dg2: Add vswing programming for SNPS phys c17b50b62625 drm/i915/dg2: Update modeset sequencese45963bba93a drm/i915/dg2: Wait for SNPS PHY calibration during display init aa3166a1e277 drm/i915/dg2: Update lane disable power state during PSR 76199f2888ef drm/i915/dg2: Update to bigjoiner pathbcdeb7e1edf0 drm/i915/dg2: Configure PCON in DP pre-enable path
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.SPARSE: warning for Begin enabling Xe_HP SDV and DG2 platforms (rev6)
In reply to Matt Roper== Series Details ==
== Series Details ==
Series: Begin enabling Xe_HP SDV and DG2 platforms (rev6)
URL : https://patchwork.freedesktop.org/series/92135/
State : warning
== Summary ==
$ dim sparse --fast origin/drm-tip Sparse version: v0.6.2 Fast mode used, each commit won't be checked separately. - +drivers/gpu/drm/i915/display/intel_display.c:1897:21: expected struct i915_vma *[assigned] vma +drivers/gpu/drm/i915/display/intel_display.c:1897:21: got void [noderef] __iomem *[assigned] iomem +drivers/gpu/drm/i915/display/intel_display.c:1897:21: warning: incorrect type in assignment (different address spaces) +drivers/gpu/drm/i915/gem/i915_gem_context.c:1413:34: expected struct i915_address_space *vm +drivers/gpu/drm/i915/gem/i915_gem_context.c:1413:34: got struct i915_address_space [noderef] __rcu *vm +drivers/gpu/drm/i915/gem/i915_gem_context.c:1413:34: warning: incorrect type in argument 1 (different address spaces) +drivers/gpu/drm/i915/gem/selftests/mock_context.c:43:25: expected struct i915_address_space [noderef] __rcu *vm +drivers/gpu/drm/i915/gem/selftests/mock_context.c:43:25: got struct i915_address_space * +drivers/gpu/drm/i915/gem/selftests/mock_context.c:43:25: warning: incorrect type in assignment (different address spaces) +drivers/gpu/drm/i915/gem/selftests/mock_context.c:60:34: expected struct i915_address_space *vm +drivers/gpu/drm/i915/gem/selftests/mock_context.c:60:34: got struct i915_address_space [noderef] __rcu *vm +drivers/gpu/drm/i915/gem/selftests/mock_context.c:60:34: warning: incorrect type in argument 1 (different address spaces) +drivers/gpu/drm/i915/gt/intel_engine_stats.h:27:9: warning: trying to copy expression type 31 +drivers/gpu/drm/i915/gt/intel_engine_stats.h:27:9: warning: trying to copy expression type 31 +drivers/gpu/drm/i915/gt/intel_engine_stats.h:27:9: warning: trying to copy expression type 31 +drivers/gpu/drm/i915/gt/intel_engine_stats.h:32:9: warning: trying to copy expression type 31 +drivers/gpu/drm/i915/gt/intel_engine_stats.h:32:9: warning: trying to copy expression type 31 +drivers/gpu/drm/i915/gt/intel_engine_stats.h:49:9: warning: trying to copy expression type 31 +drivers/gpu/drm/i915/gt/intel_engine_stats.h:49:9: warning: trying to copy expression type 31 +drivers/gpu/drm/i915/gt/intel_engine_stats.h:49:9: warning: trying to copy expression type 31 +drivers/gpu/drm/i915/gt/intel_engine_stats.h:56:9: warning: trying to copy expression type 31 +drivers/gpu/drm/i915/gt/intel_engine_stats.h:56:9: warning: trying to copy expression type 31 +drivers/gpu/drm/i915/gt/intel_reset.c:1402:5: warning: context imbalance in 'intel_gt_reset_trylock' - different lock contexts for basic block +drivers/gpu/drm/i915/gt/intel_ring_submission.c:1210:24: warning: Using plain integer as NULL pointer +drivers/gpu/drm/i915/i915_perf.c:1443:15: warning: memset with byte count of 16777216 +drivers/gpu/drm/i915/i915_perf.c:1497:15: warning: memset with byte count of 16777216 +./include/asm-generic/bitops/find.h:112:45: warning: shift count is negative (-262080) +./include/asm-generic/bitops/find.h:32:31: warning: shift count is negative (-262080) +./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_read16' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_read32' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_read64' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_read8' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_write16' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_write32' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_write8' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_read16' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_read32' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_read64' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_read8' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_write16' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_write32' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_write8' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_read16' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_read32' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_read64' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_read8' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_write16' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_write32' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_write8' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_read16' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_read32' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_read64' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_read8' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_write16' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_write32' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_write8' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen8_write16' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen8_write32' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen8_write8' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'xehp_fwtable_write16' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'xehp_fwtable_write32' - different lock contexts for basic block +./include/linux/spinlock.h:409:9: warning: context imbalance in 'xehp_fwtable_write8' - different lock contexts for basic block +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +./include/linux/stddef.h:17:9: this was the original definition +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined +/usr/lib/gcc/x86_64-linux-gnu/8/include/stddef.h:417:9: warning: preprocessor token offsetof redefined
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✓ Fi.CI.BAT: success for Begin enabling Xe_HP SDV and DG2 platforms (rev6)
In reply to Matt Roper== Series Details ==
== Series Details ==
Series: Begin enabling Xe_HP SDV and DG2 platforms (rev6)
URL : https://patchwork.freedesktop.org/series/92135/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_10382 -> Patchwork_20698
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20698/index.html
Known issues
------------
Here are the changes found in Patchwork_20698 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-c:
- fi-tgl-1115g4: [PASS][1] -> [DMESG-WARN][2] ([i915#1887])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10382/fi-tgl-1115g4/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20698/fi-tgl-1115g4/igt@[email protected]
* igt@runner@aborted:
- fi-tgl-1115g4: NOTRUN -> [FAIL][3] ([i915#1602])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20698/fi-tgl-1115g4/igt@[email protected]
#### Possible fixes ####
* igt@i915_selftest@live@hangcheck:
- {fi-hsw-gt1}: [DMESG-WARN][4] ([i915#3303]) -> [PASS][5]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10382/fi-hsw-gt1/igt@i915_selftest@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20698/fi-hsw-gt1/igt@i915_selftest@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[i915#1602]: https://gitlab.freedesktop.org/drm/intel/issues/1602
[i915#1887]: https://gitlab.freedesktop.org/drm/intel/issues/1887
[i915#3303]: https://gitlab.freedesktop.org/drm/intel/issues/3303
Participating hosts (43 -> 36)
------------------------------
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan bat-adls-4 fi-ctg-p8600 bat-adls-3 fi-bdw-samus
Build changes
-------------
* Linux: CI_DRM_10382 -> Patchwork_20698
CI-20190529: 20190529
CI_DRM_10382: 03db07ede8eeeae5fa12cb07684084e531db377b @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_6149: 34ff2cf2bc352dce691593db803389fe0eb2be03 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_20698: bcdeb7e1edf0bcaf0131923ff8fec88d6da379d2 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
bcdeb7e1edf0 drm/i915/dg2: Configure PCON in DP pre-enable path 76199f2888ef drm/i915/dg2: Update to bigjoiner pathaa3166a1e277 drm/i915/dg2: Update lane disable power state during PSR e45963bba93a drm/i915/dg2: Wait for SNPS PHY calibration during display init c17b50b62625 drm/i915/dg2: Update modeset sequencesb1efd88312b8 drm/i915/dg2: Add vswing programming for SNPS phys ba80b83c84a9 drm/i915/dg2: Add MPLLB programming for HDMI 2f1319f28f47 drm/i915/dg2: Add MPLLB programming for SNPS PHY a4f5ef996270 drm/i915/dg2: Define MOCS table for DG26a189a7ddf4d drm/i915/dg2: Report INSTDONE_GEOM values in error state 9542a06a5a35 drm/i915/dg2: Maintain backward-compatible nested batch behavior e1706eba9559 drm/i915/dg2: Add new LRI reg offsetsf7b8d3a066bf drm/i915/dg2: Add SQIDI steering134cfcfd9c84 drm/i915/dg2: Update LNCF steering ranges 1ace9a8d1b2a drm/i915/dg2: Add forcewake table4057f5104c28 drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV da9489e90eda drm/i915/xehpsdv: Read correct RP_STATE_CAP register 83b0be478cb4 drm/i915/xehpsdv: factor out function to read RP_STATE_CAP 3def48fb4238 drm/i915/xehpsdv: Define MOCS table for XeHP SDV 0a73f890d107 drm/i915/xehpsdv: Define steering tables 278d359e56da drm/i915/xehpsdv: Add compute DSS type94a690b2b730 drm/i915/xehpsdv: Add maximum sseu limits 456e57370fcd drm/i915/xehp: Changes to ss/eu definitions 21933a40845a drm/i915/xehp: Loop over all gslices for INSTDONE processing 70b1a7998cf4 drm/i915/xehp: handle new steering options 2b3f9bef9095 drm/i915/xehp: Xe_HP forcewake support25bc3daa002b drm/i915/xehp: Extra media engines - Part 3 (reset) 3f65d319057d drm/i915/xehp: Extra media engines - Part 2 (interrupts) 42a1f6157116 drm/i915/xehp: Extra media engines - Part 1 (engine definitions) f90c0193e566 drm/i915/xehpsdv: Correct parameters for IS_XEHPSDV_GT_STEP()
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20698/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx