ARM: dts: qcom-msm8974: Add blsp2_uart7 for bluetooth on sirius
Subsystems (2)
PATCH 1/2 ARM: dts: qcom-msm8974: Add blsp2_uart7 for bluetooth on sirius
From: Craig Tatlor <[email protected]>
Signed-off-by Craig Tatlor <[email protected]>
Signed-off-by Julian Weigt <[email protected]>
--- arch/arm/boot/dts/qcom-msm8974.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm/boot/dts/qcom-msm8974.dtsi +9 -0
@@ -715,6 +715,15 @@ blsp1_uart2: serial@f991e000 { status = "disabled"; }; + blsp2_uart7: serial@f995d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995d000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp2_uart8: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>;
Signature · 1 line
2.32.0
PATCH 2/2 ARM: dts: msm8974: castor: Add Bluetooth-related nodes
From: Bjorn Andersson <[email protected]>
Castor has a BCM4339 attached to BLSP2 UART7, add the necessary nodes to define the uart as well as the serdev BCM.
Signed-off-by Bjorn Andersson <[email protected]>
Signed-off-by Julian Weigt <[email protected]>
--- .../dts/qcom-msm8974-sony-xperia-castor.dts | 81 +++++++++++++++++++ 1 file changed, 81 insertions(+)
arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts +81 -0
@@ -11,6 +11,7 @@ / { aliases { serial0 = &blsp1_uart2; + serial1 = &blsp2_uart7; }; chosen {
@@ -336,6 +337,27 @@ serial@f991e000 { pinctrl-0 = <&blsp1_uart2_pin_a>; }; + serial@f995d000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart7_pin_a>; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_pin>, + <&bt_dev_wake_pin>, + <&bt_reg_on_pin>; + + host-wakeup-gpios = <&msmgpio 95 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&msmgpio 96 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; + }; + }; + usb@f9a55000 { status = "okay";
@@ -380,6 +402,40 @@ tx { }; }; + blsp2_uart7_pin_a: blsp2-uart7-pin-active { + tx { + pins = "gpio41"; + function = "blsp_uart7"; + + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio42"; + function = "blsp_uart7"; + + drive-strength = <2>; + bias-pull-up; + }; + + cts { + pins = "gpio43"; + function = "blsp_uart7"; + + drive-strength = <2>; + bias-pull-up; + }; + + rts { + pins = "gpio44"; + function = "blsp_uart7"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c8_pins: i2c8 { mux { pins = "gpio47", "gpio48";
@@ -479,6 +535,23 @@ pin { input-enable; }; }; + + bt_host_wake_pin: bt-host-wake { + pins = "gpio95"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-low; + }; + + bt_dev_wake_pin: bt-dev-wake { + pins = "gpio96"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; }; i2c@f9964000 {
@@ -606,6 +679,14 @@ gpio_keys_pin_a: gpio-keys-active { power-source = <PM8941_GPIO_S3>; }; + bt_reg_on_pin: bt-reg-on { + pins = "gpio16"; + function = "normal"; + + output-low; + power-source = <PM8941_GPIO_S3>; + }; + wlan_sleep_clk_pin: wl-sleep-clk { pins = "gpio17"; function = "func2";
Signature · 1 line
2.32.0