regulator: rt5033: Fix n_voltages settings for BUCK and LDO
Subsystems (4)
Sasha Levin
maintainerPATCH 1/3 regulator: rt5033: Fix n_voltages settings for BUCK and LDO
From: Axel Lin <[email protected]>
[ Upstream commit 6549c46af8551b346bcc0b9043f93848319acd5c ]
For linear regulators, the n_voltages should be (max - min) / step + 1.
Buck voltage from 1v to 3V, per step 100mV, and vout mask is 0x1f. If value is from 20 to 31, the voltage will all be fixed to 3V. And LDO also, just vout range is different from 1.2v to 3v, step is the same. If value is from 18 to 31, the voltage will also be fixed to 3v.
--- include/linux/mfd/rt5033-private.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/linux/mfd/rt5033-private.h +2 -2
@@ -203,13 +203,13 @@ enum rt5033_reg {#define RT5033_REGULATOR_BUCK_VOLTAGE_MIN 1000000U#define RT5033_REGULATOR_BUCK_VOLTAGE_MAX 3000000U#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP 100000U -#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM 32 +#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM 21/* RT5033 regulator LDO output voltage uV */ #define RT5033_REGULATOR_LDO_VOLTAGE_MIN 1200000U#define RT5033_REGULATOR_LDO_VOLTAGE_MAX 3000000U#define RT5033_REGULATOR_LDO_VOLTAGE_STEP 100000U -#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM 32 +#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM 19/* RT5033 regulator SAFE LDO output voltage uV */ #define RT5033_REGULATOR_SAFE_LDO_VOLTAGE 4900000U
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 2/3 r8152: Fix potential PM refcount imbalance
From: Takashi Iwai <[email protected]>
[ Upstream commit 9c23aa51477a37f8b56c3c40192248db0663c196 ]
rtl8152_close() takes the refcount via usb_autopm_get_interface() but it doesn't release when RTL8152_UNPLUG test hits. This may lead to the imbalance of PM refcount. This patch addresses it.
--- drivers/net/usb/r8152.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/usb/r8152.c +2 -1
@@ -3159,9 +3159,10 @@ static int rtl8152_close(struct net_device *netdev) tp->rtl_ops.down (tp);mutex_unlock (&tp->control); + } +if (!res)usb_autopm_put_interface (tp->intf); - }free_all_mem (tp);
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 3/3 net: Fix zero-copy head len calculation.
In reply to Sasha LevinFrom: Pravin B Shelar <[email protected]>
[ Upstream commit a17ad0961706244dce48ec941f7e476a38c0e727 ]
In some cases skb head could be locked and entire header data is pulled from skb. When skb_zerocopy() called in such cases, following BUG is triggered. This patch fixes it by copying entire skb in such cases.
This could be optimized incase this is performance bottleneck.
---8<---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G OE 5.4.0-77-generic #86-Ubuntu Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:skb_zerocopy+0x37a/0x3a0 RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246 Call Trace: <IRQ> queue_userspace_packet+0x2af/0x5e0 [openvswitch] ovs_dp_upcall+0x3d/0x60 [openvswitch] ovs_dp_process_packet+0x125/0x150 [openvswitch] ovs_vport_receive+0x77/0xd0 [openvswitch] netdev_port_receive+0x87/0x130 [openvswitch] netdev_frame_hook+0x4b/0x60 [openvswitch] __netif_receive_skb_core+0x2b4/0xc90 __netif_receive_skb_one_core+0x3f/0xa0 __netif_receive_skb+0x18/0x60 process_backlog+0xa9/0x160 net_rx_action+0x142/0x390 __do_softirq+0xe1/0x2d6 irq_exit+0xae/0xb0 do_IRQ+0x5a/0xf0 common_interrupt+0xf/0xf
Code that triggered BUG:
intskb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)
{
int i, j = 0;
int plen = 0; /* length of skb->head fragment */
int ret;
struct page *page;
unsigned int offset;
BUG_ON(!from->head_frag && !hlen);--- net/core/skbuff.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
net/core/skbuff.c +4 -1
@@ -2243,8 +2243,11 @@ skb_zerocopy_headlen(const struct sk_buff *from)if (!from->head_frag ||skb_headlen (from) <L1_CACHE_BYTES || -skb_shinfo (from)->nr_frags >=MAX_SKB_FRAGS ) +skb_shinfo (from)->nr_frags >=MAX_SKB_FRAGS ) { hlen =skb_headlen (from); +if (!hlen) + hlen = from->len; + }if (skb_has_frag_list (from)) hlen = from->len;
Signature · 1 line
2.30.2