Skip to contentSkip to conversation

spi: imx: mx51-ecspi: Fix CONFIGREG delay comment

PATCH In review Marek Vasut 3 participants 3 messages Jul 27, 2021 – Jul 28, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 spi: imx: mx51-ecspi: Fix CONFIGREG delay comment

For (2 * 1000000) / min_speed_hz < 10 to be true in naturals with zero, the min_speed_hz must be above 200000 (i.e. 200001 rounds down to 9, so the condition triggers). Update the comment. No functional change.

Fixes 6fd8b8503a0dc ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds")
Cc Uwe Kleine-König <[email protected]>
Cc Mark Brown <[email protected]>

---
V2: It is not 100 kHz, 181 kHz, 222 kHz, it is 200 kHz. Make it so.

---
 drivers/spi/spi-imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-imx.c +1 -1
index 75a82d6cac785..e3231b501ae06 100644
@@ -598,7 +598,7 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
 	}
 
 	delay = (2 * 1000000) / min_speed_hz;
-	if (likely(delay < 10))	/* SCLK is faster than 100 kHz */
+	if (likely(delay < 10))	/* SCLK is faster than 200 kHz */
 		udelay(delay);
 	else			/* SCLK is _very_ slow */
 		usleep_range(delay, delay + 10);
Signature · 1 line
2.30.2
Acked-by on v2 1/1
#1 lore raw
Quoted 10 lines · Marek Vasut

For (2 * 1000000) / min_speed_hz < 10 to be true in naturals with zero, the min_speed_hz must be above 200000 (i.e. 200001 rounds down to 9, so the condition triggers). Update the comment. No functional change.

Fixes 6fd8b8503a0dc ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds")
Cc Uwe Kleine-König <[email protected]>
Cc Mark Brown <[email protected]>

---
V2: It is not 100 kHz, 181 kHz, 222 kHz, it is 200 kHz. Make it so.

:-)

Thanks for addressing my comments.

Best regards
Uwe

Signature · 2 lines
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |
maintainer
#2 lore raw
In reply to Marek Vasut
Quoted 3 lines · Marek Vasut

For (2 * 1000000) / min_speed_hz < 10 to be true in naturals with zero, the min_speed_hz must be above 200000 (i.e. 200001 rounds down to 9, so the condition triggers). Update the comment. No functional change.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: imx: mx51-ecspi: Fix CONFIGREG delay comment

      commit: 36c2530ea963884eeb0097169f853fdc36f16ad7

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark