gpsd: update version and add python support
v3 cover gpsd: update version and add python support
Hi Thomas, Bernd, Olivier, and all,
This patch series updates gpsd to v3.21. In addition to deprecating several build options, this patch series also enables gpsd python support. Brief overview of changes:
- bump gpsd version
- move deprecated options to Config.legacy.in
- enable gpsd python support
If python is enabled, then gpsd python modules and tools are installed unconditionally. Otherwise, if gpsd python support is selected explicitly, python3 is selected.
Original patch series has been posted by Olivier Dautricourt about two months ago. I updated commit messages, file checksums, and modified gpsd python support according to review comments.
Regards,
Sergey
v1 -> v2:
- update license file checksum
- update python support according to review comments
v2 -> v3:
- address review comments: fix case w/o python support
Olivier Dautricourt (1):
package/gpsd: bump version to 3.21
Sergey Matyukevich (1):
package/gpsd: enable python support and modules
Config.in.legacy | 20 +++ ...s-during-gpsd-3.20-cross-compilation.patch | 148 ------------------ package/gpsd/Config.in | 26 ++- package/gpsd/gpsd.hash | 4 +- package/gpsd/gpsd.mk | 24 +-- 5 files changed, 45 insertions(+), 177 deletions(-) delete mode 100644 package/gpsd/0001-Fix-errors-during-gpsd-3.20-cross-compilation.patch
Signature · 1 line
2.29.1
PATCH v3 1/2 package/gpsd: bump version to 3.21
From: Olivier Dautricourt <[email protected]>
Update gpsd to latest release v3.21:
- bump version
- update checksums
- remove patch for v3.20: it is not needed for v3.21
- remove obsolete options and add them to Config.in.legacy
--- Config.in.legacy | 20 +++ ...s-during-gpsd-3.20-cross-compilation.patch | 148 ------------------ package/gpsd/Config.in | 16 -- package/gpsd/gpsd.hash | 4 +- package/gpsd/gpsd.mk | 11 +- 5 files changed, 23 insertions(+), 176 deletions(-) delete mode 100644 package/gpsd/0001-Fix-errors-during-gpsd-3.20-cross-compilation.patch
Config.in.legacy +20 -0
@@ -146,6 +146,26 @@ endif comment "Legacy options removed in 2020.11" +config BR2_PACKAGE_GPSD_FIXED_PORT_SPEED + bool "compile with fixed serial port speed" + select BR2_LEGACY + help + Since gpsd 3.20, GPSD_FIXED_PORT_SPEED is replaced + by runtime option --speed. + +config BR2_PACKAGE_GPSD_RECONFIGURE + bool "allow gpsd to change device settings" + select BR2_LEGACY + help + Since gpsd 3.21, GPSD_RECONFIGURE is replaced + by runtime option --passive. + +config BR2_PACKAGE_GPSD_CONTROLSEND + bool "allow gpsctl/gpsmon to change device settings" + select BR2_LEGACY + help + Option removed in gpsd 3.21 + config BR2_PACKAGE_OPENCV bool "opencv package was removed" select BR2_LEGACY
package/gpsd/0001-Fix-errors-during-gpsd-3.20-cross-compilation.patch deleted +0 -148
148 lines not on this page · raw message
package/gpsd/Config.in +0 -16
@@ -60,14 +60,6 @@ config BR2_PACKAGE_GPSD_GROUP_VALUE default "nobody" depends on BR2_PACKAGE_GPSD_GROUP -config BR2_PACKAGE_GPSD_FIXED_PORT_SPEED - bool "compile with fixed serial port speed" - -config BR2_PACKAGE_GPSD_FIXED_PORT_SPEED_VALUE - int "serial port speed" - default "9600" - depends on BR2_PACKAGE_GPSD_FIXED_PORT_SPEED - config BR2_PACKAGE_GPSD_MAX_CLIENT bool "compile with limited maximum clients"
@@ -84,14 +76,6 @@ config BR2_PACKAGE_GPSD_MAX_DEV_VALUE default "2" depends on BR2_PACKAGE_GPSD_MAX_DEV -config BR2_PACKAGE_GPSD_RECONFIGURE - bool "allow gpsd to change device settings" - default y - -config BR2_PACKAGE_GPSD_CONTROLSEND - bool "allow gpsctl/gpsmon to change device settings" - default y - config BR2_PACKAGE_GPSD_SQUELCH bool "squelch gpsd_report and gpsd_hexdump to save cpu"
package/gpsd/gpsd.hash +2 -2
@@ -1,3 +1,3 @@ # Locally calculated -sha256 172a7805068eacb815a3c5225436fcb0be46e7e49a5001a94034eac43df85e50 gpsd-3.20.tar.gz -sha256 13ba6fe5b2f41f03b854f9ac5f271e116d5ed55890cc20f5fe44dcfa0dc5958b COPYING +sha256 65504c3af8d3b0cce3c07405b8815d7730d2d2be2da7d28d275f1a9c57c6fe91 gpsd-3.21.tar.gz +sha256 fdf339997bbca9eaf507476b82fbcac608fc39a3d89b86b51e16db4c9f933716 COPYING
package/gpsd/gpsd.mk +1 -10
@@ -4,7 +4,7 @@ # ################################################################################ -GPSD_VERSION = 3.20 +GPSD_VERSION = 3.21 GPSD_SITE = http://download-mirror.savannah.gnu.org/releases/gpsd GPSD_LICENSE = BSD-2-Clause GPSD_LICENSE_FILES = COPYING
@@ -165,12 +165,6 @@ endif ifeq ($(BR2_PACKAGE_GPSD_SQUELCH),y) GPSD_SCONS_OPTS += squelch=yes endif -ifneq ($(BR2_PACKAGE_GPSD_RECONFIGURE),y) -GPSD_SCONS_OPTS += reconfigure=no -endif -ifneq ($(BR2_PACKAGE_GPSD_CONTROLSEND),y) -GPSD_SCONS_OPTS += controlsend=no -endif ifneq ($(BR2_PACKAGE_GPSD_OLDSTYLE),y) GPSD_SCONS_OPTS += oldstyle=no endif
@@ -186,9 +180,6 @@ endif ifeq ($(BR2_PACKAGE_GPSD_GROUP),y) GPSD_SCONS_OPTS += gpsd_group=$(BR2_PACKAGE_GPSD_GROUP_VALUE) endif -ifeq ($(BR2_PACKAGE_GPSD_FIXED_PORT_SPEED),y) -GPSD_SCONS_OPTS += fixed_port_speed=$(BR2_PACKAGE_GPSD_FIXED_PORT_SPEED_VALUE) -endif ifeq ($(BR2_PACKAGE_GPSD_MAX_CLIENT),y) GPSD_SCONS_OPTS += max_clients=$(BR2_PACKAGE_GPSD_MAX_CLIENT_VALUE) endif
Signature · 1 line
2.29.1
Yann E. MORIN
AppliedRe: [Buildroot] [PATCH v3 1/2] package/gpsd: bump version to 3.21
Sergey, Olivier, All,
On 2020-11-01 14:47 +0300, Sergey Matyukevich spake thusly:
Quoted 10 lines
From: Olivier Dautricourt <[email protected]>
Update gpsd to latest release v3.21:
- bump version
- update checksums
- remove patch for v3.20: it is not needed for v3.21
- remove obsolete options and add them to Config.in.legacySigned-off-by Olivier Dautricourt <[email protected]>Signed-off-by Sergey Matyukevich <[email protected]>
Applied to master, thanks.
Regards,
Yann E. MORIN.
Quoted 281 lines
--- Config.in.legacy | 20 +++ ...s-during-gpsd-3.20-cross-compilation.patch | 148 ------------------ package/gpsd/Config.in | 16 -- package/gpsd/gpsd.hash | 4 +- package/gpsd/gpsd.mk | 11 +- 5 files changed, 23 insertions(+), 176 deletions(-) delete mode 100644 package/gpsd/0001-Fix-errors-during-gpsd-3.20-cross-compilation.patchConfig.in.legacy +20
-0@@ -146,6 +146,26 @@ endif comment "Legacy options removed in 2020.11" +config BR2_PACKAGE_GPSD_FIXED_PORT_SPEED + bool "compile with fixed serial port speed" + select BR2_LEGACY + help + Since gpsd 3.20, GPSD_FIXED_PORT_SPEED is replaced + by runtime option --speed. + +config BR2_PACKAGE_GPSD_RECONFIGURE + bool "allow gpsd to change device settings" + select BR2_LEGACY + help + Since gpsd 3.21, GPSD_RECONFIGURE is replaced + by runtime option --passive. + +config BR2_PACKAGE_GPSD_CONTROLSEND + bool "allow gpsctl/gpsmon to change device settings" + select BR2_LEGACY + help + Option removed in gpsd 3.21 + config BR2_PACKAGE_OPENCV bool "opencv package was removed" select BR2_LEGACYpackage/gpsd/0001-Fix-errors-during-gpsd-3.20-cross-compilation.patch deleted +0
-148@@ -1,148 +0,0 @@ -From 727c37ef78f2229998ac51942f5d11c754d0c6b9 Mon Sep 17 00:00:00 2001 -From: Robert Hancock <[email protected]> -Date: Mon, 13 Jul 2020 17:33:48 -0600 -Subject: [PATCH] Fix errors during gpsd 3.20 cross-compilation - -Adapt some post-3.20 changes to the gpsd SConstruct file from the -gpsd master branch to fix issues when cross-compiling. Original -commits did not cherry-pick cleanly onto 3.20 due to other -upstream changes. - -Signed-off-by: Robert Hancock <[email protected]> ---- - SConstruct | 81 ++++++++++++++++++++++-------------------------------- - 1 file changed, 33 insertions(+), 48 deletions(-) - -diff --git a/SConstruct b/SConstruct -index 33e0ff326..93e8fcfea 100644 ---- a/SConstruct -+++ b/SConstruct -@@ -386,13 +386,16 @@ env['SC_PYTHON'] = sys.executable # Path to SCons Python - # So we rely on MergeFlags/ParseFlags to do the right thing for us. - env['STRIP'] = "strip" - env['PKG_CONFIG'] = "pkg-config" --for i in ["AR", "CC", "CXX", "LD", -- "PKG_CONFIG", "STRIP", "TAR"]: -+for i in ["AR", # linker for static libs, usually "ar" -+ "CC", -+ "CXX", -+ # "LD", # scons does not use LD, usually "ld" -+ "PKG_CONFIG", -+ "SHLINK", # linker for shared libs, usually "gcc" or "g++", NOT "ld" -+ "STRIP", -+ "TAR"]: - if i in os.environ: -- j = i -- if i == "LD": -- i = "SHLINK" -- env[i] = os.getenv(j) -+ env[i] = os.getenv(i) - for i in ["ARFLAGS", "CFLAGS", "CXXFLAGS", "LDFLAGS", "SHLINKFLAGS", - "CPPFLAGS", "CCFLAGS", "LINKFLAGS"]: - if i in os.environ: -@@ -483,7 +486,7 @@ devenv = (("ADDR2LINE", "addr2line"), - ("GCCBUG", "gccbug"), - ("GCOV", "gcov"), - ("GPROF", "gprof"), -- ("LD", "ld"), -+ # ("LD", "ld"), # scons does not use LD - ("NM", "nm"), - ("OBJCOPY", "objcopy"), - ("OBJDUMP", "objdump"), -@@ -565,6 +568,22 @@ def CheckXsltproc(context): - return ret - - -+def CheckTime_t(context): -+ context.Message('Checking if sizeof(time_t) is 64 bits... ') -+ ret = context.TryLink(""" -+ #include <time.h> -+ -+ int main(int argc, char **argv) { -+ static int test_array[1 - 2 * ((long int) sizeof(time_t) < 8 )]; -+ test_array[0] = 0; -+ (void) argc; (void) argv; -+ return 0; -+ } -+ """, '.c') -+ context.Result(ret) -+ return ret -+ -+ - def CheckCompilerOption(context, option): - context.Message('Checking if compiler accepts %s... ' % (option,)) - old_CFLAGS = context.env['CFLAGS'][:] # Get a *copy* of the old list -@@ -597,42 +616,6 @@ def CheckHeaderDefines(context, file, define): - return ret - - --def CheckSizeOf(context, type): -- """Check sizeof 'type'""" -- context.Message('Checking size of ' + type + '... ') -- -- program = """ --#include <stdlib.h> --#include <stdio.h> -- --/* -- * The CheckSizeOf function does not have a way for the caller to -- * specify header files to be included to provide the type being -- * checked. As a workaround until that is remedied, include the -- * header required for time_t, which is the sole current use of this -- * function. -- */ --#include <time.h> -- --int main() { -- printf("%d", (int)sizeof(""" + type + """)); -- return 0; --} --""" -- -- # compile it -- ret = context.TryCompile(program, '.c') -- if 0 == ret: -- announce('ERROR: TryCompile failed\n') -- # fall back to sizeof(time_t) is 8 -- return '8' -- -- # run it -- ret = context.TryRun(program, '.c') -- context.Result(ret[0]) -- return ret[1] -- -- - def CheckCompilerDefines(context, define): - context.Message('Checking if compiler supplies %s... ' % (define,)) - ret = context.TryLink(""" -@@ -708,8 +691,8 @@ config = Configure(env, custom_tests={ - 'CheckCompilerOption': CheckCompilerOption, - 'CheckHeaderDefines': CheckHeaderDefines, - 'CheckPKG': CheckPKG, -- 'CheckSizeOf': CheckSizeOf, - 'CheckXsltproc': CheckXsltproc, -+ 'CheckTime_t': CheckTime_t, - 'GetPythonValue': GetPythonValue, - }) - -@@ -1043,11 +1026,13 @@ else: - confdefs.append("/* #undef HAVE_%s_H */\n" - % hdr.replace("/", "_").upper()) - -- sizeof_time_t = config.CheckSizeOf("time_t") -- confdefs.append("#define SIZEOF_TIME_T %s\n" % sizeof_time_t) -- announce("sizeof(time_t) is %s" % sizeof_time_t) -- if 4 >= int(sizeof_time_t): -+ if 0 == config.CheckTime_t(): - announce("WARNING: time_t is too small. It will fail in 2038") -+ sizeof_time_t = 4 -+ else: -+ sizeof_time_t = 8 -+ -+ confdefs.append("#define SIZEOF_TIME_T %s\n" % sizeof_time_t) - - # check function after libraries, because some function require libraries - # for example clock_gettime() require librt on Linux glibc < 2.17 --- -2.18.4 -package/gpsd/Config.in +0
-16@@ -60,14 +60,6 @@ config BR2_PACKAGE_GPSD_GROUP_VALUE default "nobody" depends on BR2_PACKAGE_GPSD_GROUP -config BR2_PACKAGE_GPSD_FIXED_PORT_SPEED - bool "compile with fixed serial port speed" - -config BR2_PACKAGE_GPSD_FIXED_PORT_SPEED_VALUE - int "serial port speed" - default "9600" - depends on BR2_PACKAGE_GPSD_FIXED_PORT_SPEED - config BR2_PACKAGE_GPSD_MAX_CLIENT bool "compile with limited maximum clients"@@ -84,14 +76,6 @@ config BR2_PACKAGE_GPSD_MAX_DEV_VALUE default "2" depends on BR2_PACKAGE_GPSD_MAX_DEV -config BR2_PACKAGE_GPSD_RECONFIGURE - bool "allow gpsd to change device settings" - default y - -config BR2_PACKAGE_GPSD_CONTROLSEND - bool "allow gpsctl/gpsmon to change device settings" - default y - config BR2_PACKAGE_GPSD_SQUELCH bool "squelch gpsd_report and gpsd_hexdump to save cpu"package/gpsd/gpsd.hash +2
-2@@ -1,3 +1,3 @@ # Locally calculated -sha256 172a7805068eacb815a3c5225436fcb0be46e7e49a5001a94034eac43df85e50 gpsd-3.20.tar.gz -sha256 13ba6fe5b2f41f03b854f9ac5f271e116d5ed55890cc20f5fe44dcfa0dc5958b COPYING +sha256 65504c3af8d3b0cce3c07405b8815d7730d2d2be2da7d28d275f1a9c57c6fe91 gpsd-3.21.tar.gz +sha256 fdf339997bbca9eaf507476b82fbcac608fc39a3d89b86b51e16db4c9f933716 COPYINGpackage/gpsd/gpsd.mk +1
-10@@ -4,7 +4,7 @@ # ################################################################################ -GPSD_VERSION = 3.20 +GPSD_VERSION = 3.21 GPSD_SITE = http://download-mirror.savannah.gnu.org/releases/gpsd GPSD_LICENSE = BSD-2-Clause GPSD_LICENSE_FILES = COPYING@@ -165,12 +165,6 @@ endif ifeq ($(BR2_PACKAGE_GPSD_SQUELCH),y) GPSD_SCONS_OPTS += squelch=yes endif -ifneq ($(BR2_PACKAGE_GPSD_RECONFIGURE),y) -GPSD_SCONS_OPTS += reconfigure=no -endif -ifneq ($(BR2_PACKAGE_GPSD_CONTROLSEND),y) -GPSD_SCONS_OPTS += controlsend=no -endif ifneq ($(BR2_PACKAGE_GPSD_OLDSTYLE),y) GPSD_SCONS_OPTS += oldstyle=no endif@@ -186,9 +180,6 @@ endif ifeq ($(BR2_PACKAGE_GPSD_GROUP),y) GPSD_SCONS_OPTS += gpsd_group=$(BR2_PACKAGE_GPSD_GROUP_VALUE) endif -ifeq ($(BR2_PACKAGE_GPSD_FIXED_PORT_SPEED),y) -GPSD_SCONS_OPTS += fixed_port_speed=$(BR2_PACKAGE_GPSD_FIXED_PORT_SPEED_VALUE) -endif ifeq ($(BR2_PACKAGE_GPSD_MAX_CLIENT),y) GPSD_SCONS_OPTS += max_clients=$(BR2_PACKAGE_GPSD_MAX_CLIENT_VALUE) endifSignature · 6 lines
2.29.1 _______________________________________________ buildroot mailing list [email protected] http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 10 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' _______________________________________________ buildroot mailing list [email protected] http://lists.busybox.net/mailman/listinfo/buildroot
PATCH v3 2/2 package/gpsd: enable python support and modules
In reply to Sergey MatyukevichAdd option that enables gpsd python support including modules, tools, and gpsfake test harness. If python is enabled then install python modules unconditionally. Note that gpsd python modules run compatibly under Python 2 and 3.x for x >= 2. So enable gpsd python support when any Python version is enabled in board configuration. If no Python is enabled, but gpsd Python support is requested, then select Python 3.
--- package/gpsd/Config.in | 10 ++++++++++ package/gpsd/gpsd.mk | 13 ++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-)
package/gpsd/Config.in +10 -0
@@ -79,6 +79,16 @@ config BR2_PACKAGE_GPSD_MAX_DEV_VALUE config BR2_PACKAGE_GPSD_SQUELCH bool "squelch gpsd_report and gpsd_hexdump to save cpu" +config BR2_PACKAGE_GPSD_PYTHON + bool "build Python support and modules" + depends on BR2_USE_WCHAR # python + select BR2_PACKAGE_PYTHON3 if !BR2_PACKAGE_PYTHON + help + Python libraries and tools for the gpsd service daemon including gpsfake test harness. + +comment "GPSD python support not available with toolchain w/o wide characters support" + depends on !BR2_USE_WCHAR + comment "Protocols" config BR2_PACKAGE_GPSD_AIVDM
package/gpsd/gpsd.mk +12 -1
@@ -23,7 +23,6 @@ GPSD_SCONS_OPTS = \ prefix=/usr \ sysroot=$(STAGING_DIR) \ strip=no \ - python=no \ qt=no \ systemd=$(if $(BR2_INIT_SYSTEMD),yes,no)
@@ -186,6 +185,18 @@ endif ifeq ($(BR2_PACKAGE_GPSD_MAX_DEV),y) GPSD_SCONS_OPTS += max_devices=$(BR2_PACKAGE_GPSD_MAX_DEV_VALUE) endif +ifeq ($(BR2_PACKAGE_PYTHON3),y) + GPSD_SCONS_OPTS += \ + python=yes \ + python_libdir="/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages" +else ifeq ($(BR2_PACKAGE_PYTHON),y) + GPSD_SCONS_OPTS += \ + python=yes \ + python_libdir="/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages" +else + GPSD_SCONS_OPTS += \ + python=no +endif GPSD_SCONS_ENV += \ LDFLAGS="$(GPSD_LDFLAGS)" \
Signature · 1 line
2.29.1
Re: [Buildroot] [PATCH v3 2/2] package/gpsd: enable python support and modules
Sergey, All,
On 2020-11-01 14:47 +0300, Sergey Matyukevich spake thusly:
Quoted 18 lines
Add option that enables gpsd python support including modules, tools, and gpsfake test harness. If python is enabled then install python modules unconditionally. Note that gpsd python modules run compatibly under Python 2 and 3.x for x >= 2. So enable gpsd python support when any Python version is enabled in board configuration. If no Python is enabled, but gpsd Python support is requested, then select Python 3.
Signed-off-by Sergey Matyukevich <[email protected]>--- package/gpsd/Config.in | 10 ++++++++++ package/gpsd/gpsd.mk | 13 ++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-)package/gpsd/Config.in +0
-0
package/gpsd/Config.in config BR2_PACKAGE_GPSD_MAX_DEV_VALUE · line 87
Quoted 9 lines
package/gpsd/Config.in +6
-0@@ -79,6 +79,16 @@ config BR2_PACKAGE_GPSD_MAX_DEV_VALUE config BR2_PACKAGE_GPSD_SQUELCH bool "squelch gpsd_report and gpsd_hexdump to save cpu" +config BR2_PACKAGE_GPSD_PYTHON + bool "build Python support and modules" + depends on BR2_USE_WCHAR # python + select BR2_PACKAGE_PYTHON3 if !BR2_PACKAGE_PYTHON + help + Python libraries and tools for the gpsd service daemon including gpsfake test harness.
$ make check-package
package/gpsd/Config.in:87: help text: <tab><2 spaces><62 chars>
(http://nightly.buildroot.org/#writing-rules-config-in)package/gpsd/Config.in config BR2_PACKAGE_GPSD_MAX_DEV_VALUE · line 90
Quoted 2 lines
package/gpsd/Config.in +2
-0+comment "GPSD python support not available with toolchain w/o wide characters support" + depends on !BR2_USE_WCHAR
As per the manual
https://buildroot.org/downloads/manual/manual.html#dependencies-target-toolchain-options
gpsd needs a toolchain w/ wchar
Quoted 20 lines
package/gpsd/Config.in +0
-0comment "Protocols" config BR2_PACKAGE_GPSD_AIVDMpackage/gpsd/gpsd.mk +1
-1@@ -23,7 +23,6 @@ GPSD_SCONS_OPTS = \ prefix=/usr \ sysroot=$(STAGING_DIR) \ strip=no \ - python=no \ qt=no \ systemd=$(if $(BR2_INIT_SYSTEMD),yes,no)@@ -186,6 +185,18 @@ endif ifeq ($(BR2_PACKAGE_GPSD_MAX_DEV),y) GPSD_SCONS_OPTS += max_devices=$(BR2_PACKAGE_GPSD_MAX_DEV_VALUE) endif +ifeq ($(BR2_PACKAGE_PYTHON3),y)
package/gpsd/gpsd.mk endif · line 198
Quoted 10 lines
package/gpsd/gpsd.mk +10
-0+ GPSD_SCONS_OPTS += \ + python=yes \ + python_libdir="/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages" +else ifeq ($(BR2_PACKAGE_PYTHON),y) + GPSD_SCONS_OPTS += \ + python=yes \ + python_libdir="/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages" +else + GPSD_SCONS_OPTS += \ + python=no
$ make check-package
package/gpsd/gpsd.mk:191: unexpected indent with tabs
package/gpsd/gpsd.mk:195: unexpected indent with tabs
package/gpsd/gpsd.mk:199: unexpected indent with tabsI've fixed those three, and Applied to master, thanks.
Regards,
Yann E. MORIN.
Quoted 11 lines
package/gpsd/gpsd.mk +1
-0+endif GPSD_SCONS_ENV += \ LDFLAGS="$(GPSD_LDFLAGS)" \Signature · 6 lines
2.29.1 _______________________________________________ buildroot mailing list [email protected] http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 10 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' _______________________________________________ buildroot mailing list [email protected] http://lists.busybox.net/mailman/listinfo/buildroot