staging: vchiq: Minor fixups to CONFIG_VCHIQ_CDEV
Subsystems (2)
cover staging: vchiq: Minor fixups to CONFIG_VCHIQ_CDEV
Hi everyone,
The patchset performs some minor fixups to the CONFIG_VCHIQ_CDEV config option defined in /staging/vc04_services/Kconfig. (Introduced in [1])
Summary:
Patch 1: Enable the config by default to be more consistent with how
cdev creation worked before this config was introduced
Patch 2: Add some more details to the config's help text
Please let me know if any changes are required.
Thank you!
Ojaswin
Ojaswin Mujoo (2):
staging: vchiq: Set $CONFIG_VCHIQ_CDEV to be enabled by default
staging: vchiq: Add details to $CONFIG_VCHIQ_CDEV help text
drivers/staging/vc04_services/Kconfig | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/2 staging: vchiq: Set $CONFIG_VCHIQ_CDEV to be enabled by default
Before this config was defined, the cdev used to be created unconditionally. When an earlier commit introduced this config, the default behavior was set to disabled, which might surprise some unsuspecting users. Hence, make this config default to 'Y' to be more backward consistent.
--- drivers/staging/vc04_services/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/staging/vc04_services/Kconfig +1 -0
@@ -23,6 +23,7 @@ if BCM2835_VCHIQ config VCHIQ_CDEV bool "VCHIQ Character Driver" + default y help Enable the creation of VCHIQ character driver to help communicate with the Videocore platform.
Signature · 1 line
2.25.1
Greg KH
maintainerRe: [PATCH 1/2] staging: vchiq: Set $CONFIG_VCHIQ_CDEV to be enabled by default
Quoted 16 lines · Ojaswin Mujoo
Before this config was defined, the cdev used to be created unconditionally. When an earlier commit introduced this config, the default behavior was set to disabled, which might surprise some unsuspecting users. Hence, make this config default to 'Y' to be more backward consistent.
Signed-off-by Ojaswin Mujoo <[email protected]>--- drivers/staging/vc04_services/Kconfig | 1 + 1 file changed, 1 insertion(+)drivers/staging/vc04_services/Kconfig +0
-0
drivers/staging/vc04_services/Kconfig if BCM2835_VCHIQ · line 26
Quoted 4 lines
drivers/staging/vc04_services/Kconfig +1
-0@@ -23,6 +23,7 @@ if BCM2835_VCHIQ config VCHIQ_CDEV bool "VCHIQ Character Driver" + default y
default y is only if the machine will not work without this option. Is that the case here? If not, then please do not have this as the default.
thanks,
greg k-h
Re: [PATCH 1/2] staging: vchiq: Set $CONFIG_VCHIQ_CDEV to be enabled by default
Quoted 18 lines · Greg KH
Quoted 17 lines · Ojaswin Mujoo
Before this config was defined, the cdev used to be created unconditionally. When an earlier commit introduced this config, the default behavior was set to disabled, which might surprise some unsuspecting users. Hence, make this config default to 'Y' to be more backward consistent.
Signed-off-by Ojaswin Mujoo <[email protected]>--- drivers/staging/vc04_services/Kconfig | 1 + 1 file changed, 1 insertion(+)drivers/staging/vc04_services/Kconfig +0
-0@@ -23,6 +23,7 @@ if BCM2835_VCHIQ
Quoted 8 lines
drivers/staging/vc04_services/Kconfig if BCM2835_VCHIQ · line 26
Quoted 3 lines
drivers/staging/vc04_services/Kconfig +1
-0config VCHIQ_CDEV bool "VCHIQ Character Driver" + default ydefault y is only if the machine will not work without this option. Is that the case here? If not, then please do not have this as the default.
Got it Greg.
From my testing, the Raspberry Pi does seem to boot correctly without this although some userspace libraries might not work.
Since the machine itself works, I guess I'll drop this patch.
Thank you!
Ojaswin
Quoted 4 lines
thanks,
greg k-h
Re: [PATCH 1/2] staging: vchiq: Set $CONFIG_VCHIQ_CDEV to be enabled by default
Am 28.07.21 um 22:06 schrieb Ojaswin Mujoo:
Quoted 26 lines · Greg KH
Quoted 18 lines · Ojaswin Mujoo
Quoted 17 lines
Before this config was defined, the cdev used to be created unconditionally. When an earlier commit introduced this config, the default behavior was set to disabled, which might surprise some unsuspecting users. Hence, make this config default to 'Y' to be more backward consistent.
Signed-off-by Ojaswin Mujoo <[email protected]>--- drivers/staging/vc04_services/Kconfig | 1 + 1 file changed, 1 insertion(+)drivers/staging/vc04_services/Kconfig +0
-0@@ -23,6 +23,7 @@ if BCM2835_VCHIQQuoted 7 lines
drivers/staging/vc04_services/Kconfig if BCM2835_VCHIQ · line 26
Quoted 3 lines
drivers/staging/vc04_services/Kconfig +1
-0config VCHIQ_CDEV bool "VCHIQ Character Driver" + default ydefault y is only if the machine will not work without this option. Is that the case here? If not, then please do not have this as the default.
Quoted 6 lines
Got it Greg.
From my testing, the Raspberry Pi does seem to boot correctly without this although some userspace libraries might not work.
Since the machine itself works, I guess I'll drop this patch.
The idea is good, but the patch needs improvement :)
Acceptable solution might be that BCM2835_VCHIQ selects VCHIQ_CDEV.
Quoted 10 lines
Thank you!
OjaswinQuoted 3 lines
thanks,
greg k-h
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 1/2] staging: vchiq: Set $CONFIG_VCHIQ_CDEV to be enabled by default
Quoted 29 lines · Stefan Wahren
Am 28.07.21 um 22:06 schrieb Ojaswin Mujoo:
Quoted 28 lines · Greg KH
Quoted 18 lines · Ojaswin Mujoo
Quoted 17 lines
Before this config was defined, the cdev used to be created unconditionally. When an earlier commit introduced this config, the default behavior was set to disabled, which might surprise some unsuspecting users. Hence, make this config default to 'Y' to be more backward consistent.
Signed-off-by Ojaswin Mujoo <[email protected]>--- drivers/staging/vc04_services/Kconfig | 1 + 1 file changed, 1 insertion(+)drivers/staging/vc04_services/Kconfig +0
-0@@ -23,6 +23,7 @@ if BCM2835_VCHIQQuoted 7 lines
drivers/staging/vc04_services/Kconfig if BCM2835_VCHIQ · line 26
Quoted 3 lines
drivers/staging/vc04_services/Kconfig +1
-0config VCHIQ_CDEV bool "VCHIQ Character Driver" + default ydefault y is only if the machine will not work without this option. Is that the case here? If not, then please do not have this as the default.
Got it Greg.
Quoted 8 lines
Quoted 4 lines
From my testing, the Raspberry Pi does seem to boot correctly without this although some userspace libraries might not work.
Since the machine itself works, I guess I'll drop this patch.
The idea is good, but the patch needs improvement :)
Acceptable solution might be that
BCM2835_VCHIQselectsVCHIQ_CDEV.
Thanks for the suggestion, Stefan.
So on testing with select, it seems like select defines a hard reverse dependency i.e if BCM2835_VCHIQ=y then VCHIQ_CDEV=y and it can't be set to n.
Checking the Kconfig launguae doc, I found that we could use "imply" to define weak reverse dependencies, such that BCM2835_VCHIQ=y auto selects VCHIQ_CDEV=y but we can also change it back to n if required. I tested this out and it seems to work fine. I believe we can se imply here as it better suits the use case.
Thank you,
Ojaswin
Quoted 12 lines
Quoted 11 lines
Thank you!
OjaswinQuoted 3 lines
thanks,
greg k-h
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 2/2 staging: vchiq: Add details to $CONFIG_VCHIQ_CDEV help text
In reply to Ojaswin MujooAdd some details to the Kconfig definition of $CONFIG_VCHIQ_CDEV to help make the motive behind it a bit more clear.
--- drivers/staging/vc04_services/Kconfig | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/staging/vc04_services/Kconfig +6 -2
@@ -25,8 +25,12 @@ config VCHIQ_CDEV bool "VCHIQ Character Driver" default y help - Enable the creation of VCHIQ character driver to help - communicate with the Videocore platform. + Enable the creation of VCHIQ character driver to help communicate + with the VideoCore platform. The cdev exposes ioctls used by + userspace libraries and testing tools to interact with VideoCore. + This can be set to 'N' if the VideoCore communication is not needed + by userspace but only by other kernel modules (like bcm2835-audio). + If not sure, set this to 'Y'. endif
Signature · 1 line
2.25.1
Greg KH
maintainerRe: [PATCH 2/2] staging: vchiq: Add details to $CONFIG_VCHIQ_CDEV help text
Quoted 14 lines · Ojaswin Mujoo
Add some details to the
Kconfigdefinition of $CONFIG_VCHIQ_CDEV to help make the motive behind it a bit more clear.Signed-off-by Ojaswin Mujoo <[email protected]>--- drivers/staging/vc04_services/Kconfig | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)drivers/staging/vc04_services/Kconfig +0
-0@@ -25,8 +25,12 @@ config VCHIQ_CDEV bool "VCHIQ Character Driver"
drivers/staging/vc04_services/Kconfig config VCHIQ_CDEV · line 33
Quoted 10 lines
drivers/staging/vc04_services/Kconfig +6
-2default y help - Enable the creation of VCHIQ character driver to help - communicate with the Videocore platform. + Enable the creation of VCHIQ character driver to help communicate + with the VideoCore platform. The cdev exposes ioctls used by + userspace libraries and testing tools to interact with VideoCore. + This can be set to 'N' if the VideoCore communication is not needed + by userspace but only by other kernel modules (like bcm2835-audio). + If not sure, set this to 'Y'.
I still do not understand if I need this driver or not, and I have this hardware! What functionality does this driver accomplish? What is VideoCore?
thanks,
greg k-h
Re: [PATCH 2/2] staging: vchiq: Add details to $CONFIG_VCHIQ_CDEV help text
Quoted 21 lines · Greg KH
Quoted 20 lines · Ojaswin Mujoo
Add some details to the
Kconfigdefinition of $CONFIG_VCHIQ_CDEV to help make the motive behind it a bit more clear.Signed-off-by Ojaswin Mujoo <[email protected]>--- drivers/staging/vc04_services/Kconfig | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)drivers/staging/vc04_services/Kconfig +2
-2@@ -25,8 +25,12 @@ config VCHIQ_CDEV bool "VCHIQ Character Driver" default y help - Enable the creation of VCHIQ character driver to help - communicate with the Videocore platform. + Enable the creation of VCHIQ character driver to help communicate + with the VideoCore platform. The cdev exposes ioctls used by
Quoted 8 lines
drivers/staging/vc04_services/Kconfig config VCHIQ_CDEV · line 33
Quoted 4 lines
drivers/staging/vc04_services/Kconfig +4
-0+ userspace libraries and testing tools to interact with VideoCore. + This can be set to 'N' if the VideoCore communication is not needed + by userspace but only by other kernel modules (like bcm2835-audio). + If not sure, set this to 'Y'.I still do not understand if I need this driver or not, and I have this hardware! What functionality does this driver accomplish? What is VideoCore?
Hey Greg,
I believe I can add this under the CONFIG_BCM2835_VCHIQ config option, as that enables the core driver that implements the functions to communicate with VideoCore platform?
This config option merely adds a cdev which exposes the the core driver's functionality to userspace.
Regards,
Ojaswin
Quoted 4 lines
thanks,
greg k-h
Re: [PATCH 2/2] staging: vchiq: Add details to $CONFIG_VCHIQ_CDEV help text
Am 28.07.21 um 22:00 schrieb Ojaswin Mujoo:
Quoted 29 lines · Greg KH
Quoted 20 lines · Ojaswin Mujoo
Quoted 19 lines
Add some details to the
Kconfigdefinition of $CONFIG_VCHIQ_CDEV to help make the motive behind it a bit more clear.Signed-off-by Ojaswin Mujoo <[email protected]>--- drivers/staging/vc04_services/Kconfig | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)drivers/staging/vc04_services/Kconfig +1
-2@@ -25,8 +25,12 @@ config VCHIQ_CDEV bool "VCHIQ Character Driver" default y help - Enable the creation of VCHIQ character driver to help - communicate with the Videocore platform. + Enable the creation of VCHIQ character driver to help communicateQuoted 8 lines
drivers/staging/vc04_services/Kconfig config VCHIQ_CDEV · line 33
Quoted 5 lines
drivers/staging/vc04_services/Kconfig +5
-0+ with the VideoCore platform. The cdev exposes ioctls used by + userspace libraries and testing tools to interact with VideoCore. + This can be set to 'N' if the VideoCore communication is not needed + by userspace but only by other kernel modules (like bcm2835-audio). + If not sure, set this to 'Y'.I still do not understand if I need this driver or not, and I have this hardware! What functionality does this driver accomplish? What is VideoCore?
Quoted 5 lines
Hey Greg,
I believe I can add this under the
CONFIG_BCM2835_VCHIQconfig option, as that enables the core driver that implements the functions to communicate with VideoCore platform?
Sorry, today i'm too tired to give a good explanation. VideoCore is the VPU inside the BCM283x SoC. It runs a firmware and VCHIQ provides a way to communicate with this firmware / VPU. The VCHIQ driver is required to get access to the audio jack and camera interface (see depending drivers).
Unfortunately i don't have an application list by the hand which uses the CDEV interface for VCHIQ, please use this link [1] as a starting point.
[1] - https://github.com/raspberrypi/userland
Quoted 13 lines
This config option merely adds a cdev which exposes the the core driver's functionality to userspace.
Regards,
OjaswinQuoted 3 lines
thanks,
greg k-h
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 2/2] staging: vchiq: Add details to $CONFIG_VCHIQ_CDEV help text
Quoted 41 lines · Stefan Wahren
Am 28.07.21 um 22:00 schrieb Ojaswin Mujoo:
Quoted 29 lines · Greg KH
Quoted 20 lines · Ojaswin Mujoo
Quoted 19 lines
Add some details to the
Kconfigdefinition of $CONFIG_VCHIQ_CDEV to help make the motive behind it a bit more clear.Signed-off-by Ojaswin Mujoo <[email protected]>--- drivers/staging/vc04_services/Kconfig | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)drivers/staging/vc04_services/Kconfig +1
-2@@ -25,8 +25,12 @@ config VCHIQ_CDEV bool "VCHIQ Character Driver" default y help - Enable the creation of VCHIQ character driver to help - communicate with the Videocore platform. + Enable the creation of VCHIQ character driver to help communicateQuoted 8 lines
drivers/staging/vc04_services/Kconfig config VCHIQ_CDEV · line 33
Quoted 5 lines
drivers/staging/vc04_services/Kconfig +5
-0+ with the VideoCore platform. The cdev exposes ioctls used by + userspace libraries and testing tools to interact with VideoCore. + This can be set to 'N' if the VideoCore communication is not needed + by userspace but only by other kernel modules (like bcm2835-audio). + If not sure, set this to 'Y'.I still do not understand if I need this driver or not, and I have this hardware! What functionality does this driver accomplish? What is VideoCore?
Quoted 5 lines
Hey Greg,
I believe I can add this under the
CONFIG_BCM2835_VCHIQconfig option, as that enables the core driver that implements the functions to communicate with VideoCore platform?Sorry, today i'm too tired to give a good explanation. VideoCore is the VPU inside the BCM283x SoC. It runs a firmware and VCHIQ provides a way to communicate with this firmware / VPU. The VCHIQ driver is required to get access to the audio jack and camera interface (see depending drivers).
Quoted 5 lines
Unfortunately i don't have an application list by the hand which uses the CDEV interface for VCHIQ, please use this link [1] as a starting point.
Hi Stefan
Thanks for the brief, its good enough to help me get started. I've also been looking more closely into this driver in my free time lately and I can try to come up with a small summary to use as the help text. I'll add it in v2 of this patch.
Regards,
Ojaswin
Quoted 14 lines
Quoted 13 lines
This config option merely adds a cdev which exposes the the core driver's functionality to userspace.
Regards,
OjaswinQuoted 3 lines
thanks,
greg k-h
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel