Skip to contentSkip to conversation

ipmi: rate limit ipmi smi_event failure message

PATCH In review Wen Yang 2 participants 2 messages Jul 29, 2021 IPMI

lore
Share & tools
lore

Wen Yang

author
#0 lore raw

PATCH 1/1 ipmi: rate limit ipmi smi_event failure message

Sometimes we can't get a valid si_sm_data, and we print an error message accordingly. But the ipmi module seem to like retrying a lot, in which case we flood the kernel log with a lot of messages, eg:

[46318019.164726] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318020.109700] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318021.158677] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318022.212598] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318023.258564] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318024.210455] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318025.260473] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318026.308445] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318027.356389] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318028.298288] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318029.363302] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
---
 drivers/char/ipmi/ipmi_si_intf.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
drivers/char/ipmi/ipmi_si_intf.c +8 -7
index 62929a3..f64c3ac 100644
@@ -591,7 +591,7 @@ static void handle_transaction_done(struct smi_info *smi_info)
 		smi_info->handlers->get_result(smi_info->si_sm, msg, 3);
 		if (msg[2] != 0) {
 			/* Error clearing flags */
-			dev_warn(smi_info->io.dev,
+			dev_warn_ratelimited(smi_info->io.dev,
 				 "Error clearing flags: %2.2x\n", msg[2]);
 		}
 		smi_info->si_state = SI_NORMAL;
@@ -683,10 +683,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
 		/* We got the flags from the SMI, now handle them. */
 		smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 		if (msg[2] != 0) {
-			dev_warn(smi_info->io.dev,
-				 "Couldn't get irq info: %x.\n", msg[2]);
-			dev_warn(smi_info->io.dev,
-				 "Maybe ok, but ipmi might run very slowly.\n");
+#define IPMI_WARN_CHECKING_ENABLES "Maybe ok, but ipmi might run very slowly."
+
+			dev_warn_ratelimited(smi_info->io.dev,
+				"Couldn't get irq info: %x, %s\n",
+				msg[2], IPMI_WARN_CHECKING_ENABLES);
 			smi_info->si_state = SI_NORMAL;
 			break;
 		}
@@ -721,7 +722,7 @@ static void handle_transaction_done(struct smi_info *smi_info)
 
 		smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 		if (msg[2] != 0)
-			dev_warn(smi_info->io.dev,
+			dev_warn_ratelimited(smi_info->io.dev,
 				 "Could not set the global enables: 0x%x.\n",
 				 msg[2]);
 
@@ -1343,7 +1344,7 @@ static int try_get_dev_id(struct smi_info *smi_info)
 
 		if (cc != IPMI_CC_NO_ERROR &&
 		    ++retry_count <= GET_DEVICE_ID_MAX_RETRY) {
-			dev_warn(smi_info->io.dev,
+			dev_warn_ratelimited(smi_info->io.dev,
 			    "BMC returned 0x%2.2x, retry get bmc device id\n",
 			    cc);
 			goto retry;
Signature · 1 line
1.8.3.1
#1 lore raw
Quoted 3 lines · Wen Yang

Sometimes we can't get a valid si_sm_data, and we print an error message accordingly. But the ipmi module seem to like retrying a lot, in which case we flood the kernel log with a lot of messages, eg:

This is reasonable. I moved the #define into the dev_warn_ratelimited because that looked a little strange, and having the #define really didn't add any value. But that's it, queued for next release.

Thanks,

-corey

Quoted 72 lines
[46318019.164726] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318020.109700] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318021.158677] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318022.212598] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318023.258564] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318024.210455] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318025.260473] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318026.308445] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318027.356389] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318028.298288] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318029.363302] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
---
 drivers/char/ipmi/ipmi_si_intf.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
drivers/char/ipmi/ipmi_si_intf.c +8 -7
index 62929a3..f64c3ac 100644
@@ -591,7 +591,7 @@ static void handle_transaction_done(struct smi_info *smi_info)
 		smi_info->handlers->get_result(smi_info->si_sm, msg, 3);
 		if (msg[2] != 0) {
 			/* Error clearing flags */
-			dev_warn(smi_info->io.dev,
+			dev_warn_ratelimited(smi_info->io.dev,
 				 "Error clearing flags: %2.2x\n", msg[2]);
 		}
 		smi_info->si_state = SI_NORMAL;
@@ -683,10 +683,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
 		/* We got the flags from the SMI, now handle them. */
 		smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 		if (msg[2] != 0) {
-			dev_warn(smi_info->io.dev,
-				 "Couldn't get irq info: %x.\n", msg[2]);
-			dev_warn(smi_info->io.dev,
-				 "Maybe ok, but ipmi might run very slowly.\n");
+#define IPMI_WARN_CHECKING_ENABLES "Maybe ok, but ipmi might run very slowly."
+
+			dev_warn_ratelimited(smi_info->io.dev,
+				"Couldn't get irq info: %x, %s\n",
+				msg[2], IPMI_WARN_CHECKING_ENABLES);
 			smi_info->si_state = SI_NORMAL;
 			break;
 		}
@@ -721,7 +722,7 @@ static void handle_transaction_done(struct smi_info *smi_info)
 
 		smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 		if (msg[2] != 0)
-			dev_warn(smi_info->io.dev,
+			dev_warn_ratelimited(smi_info->io.dev,
 				 "Could not set the global enables: 0x%x.\n",
 				 msg[2]);
 
@@ -1343,7 +1344,7 @@ static int try_get_dev_id(struct smi_info *smi_info)
 
 		if (cc != IPMI_CC_NO_ERROR &&
 		    ++retry_count <= GET_DEVICE_ID_MAX_RETRY) {
-			dev_warn(smi_info->io.dev,
+			dev_warn_ratelimited(smi_info->io.dev,
 			    "BMC returned 0x%2.2x, retry get bmc device id\n",
 			    cc);
 			goto retry;
Signature · 1 line
1.8.3.1