ASoC: cs42l42: Correct definition of ADC Volume control
Subsystems (3)
Richard Fitzgerald
maintainerPATCH 1/3 ASoC: cs42l42: Correct definition of ADC Volume control
The ADC volume is a signed 8-bit number with range -97 to +12, with -97 being mute. Use a SOC_SINGLE_S8_TLV() to define this and fix the DECLARE_TLV_DB_SCALE() to have the correct start and mute flag.
--- sound/soc/codecs/cs42l42.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
sound/soc/codecs/cs42l42.c +2 -3
@@ -405,7 +405,7 @@ static const struct regmap_config cs42l42_regmap = { .use_single_write = true, }; -static DECLARE_TLV_DB_SCALE(adc_tlv, -9600, 100, false); +static DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 100, true); static DECLARE_TLV_DB_SCALE(mixer_tlv, -6300, 100, true);static const char *const cs42l42_hpf_freq_text[] = {
@@ -444,8 +444,7 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = { CS42L42_ADC_INV_SHIFT, true, false),SOC_SINGLE ("ADC Boost Switch" ,CS42L42_ADC_CTL ,CS42L42_ADC_DIG_BOOST_SHIFT , true, false), -SOC_SINGLE_SX_TLV ("ADC Volume" ,CS42L42_ADC_VOLUME , -CS42L42_ADC_VOL_SHIFT ,0xA0 ,0x6C , adc_tlv), +SOC_SINGLE_S8_TLV ("ADC Volume" ,CS42L42_ADC_VOLUME ,-97 ,12 , adc_tlv),SOC_SINGLE ("ADC WNF Switch" ,CS42L42_ADC_WNF_HPF_CTL ,CS42L42_ADC_WNF_EN_SHIFT , true, false), SOC_SINGLE("ADC HPF Switch", CS42L42_ADC_WNF_HPF_CTL,
Signature · 1 line
2.11.0
Richard Fitzgerald
maintainerPATCH 2/3 ASoC: cs42l42: Don't allow SND_SOC_DAIFMT_LEFT_J
The driver has no support for left-justified protocol so it should not have been allowing this to be passed to cs42l42_set_dai_fmt().
--- sound/soc/codecs/cs42l42.c | 1 - 1 file changed, 1 deletion(-)
sound/soc/codecs/cs42l42.c +0 -1
@@ -788,7 +788,6 @@ static int cs42l42_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)/* interface format */ switch (fmt &SND_SOC_DAIFMT_FORMAT_MASK ) {case SND_SOC_DAIFMT_I2S : -case SND_SOC_DAIFMT_LEFT_J :break ;default :return -EINVAL ;
Signature · 1 line
2.11.0
Richard Fitzgerald
maintainerPATCH 3/3 ASoC: cs42l42: Fix bclk calculation for mono
In reply to Richard FitzgeraldAn I2S frame always has a left and right channel slot even if mono data is being sent. So if channels==1 the actual bitclock frequency is 2 * snd_soc_params_to_bclk(params).
--- sound/soc/codecs/cs42l42.c | 4 ++++ 1 file changed, 4 insertions(+)
sound/soc/codecs/cs42l42.c +4 -0
@@ -830,6 +830,10 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream, cs42l42->srate =params_rate (params); cs42l42->bclk =snd_soc_params_to_bclk (params); +/* I2S frame always has 2 channels even for mono audio */ +if (channels ==1 ) + cs42l42->bclk *=2 ; +switch (substream->stream) {case SNDRV_PCM_STREAM_CAPTURE :if (channels ==2 ) {
Signature · 1 line
2.11.0
Mark Brown
maintainerQuoted 4 lines · Richard Fitzgerald
The ADC volume is a signed 8-bit number with range -97 to +12, with -97 being mute. Use a
SOC_SINGLE_S8_TLV()to define this and fix theDECLARE_TLV_DB_SCALE()to have the correct start and mute flag.
Applied to
torvalds/linux.git master
Thanks!
[1/3] ASoC: cs42l42: Correct definition of ADC Volume control
commit: ee86f680ff4c9b406d49d4e22ddf10805b8a2137
[2/3] ASoC: cs42l42: Don't allow SND_SOC_DAIFMT_LEFT_J
commit: 64324bac750b84ca54711fb7d332132fcdb87293
[3/3] ASoC: cs42l42: Fix bclk calculation for mono
commit: 926ef1a4c245c093acc07807e466ad2ef0ff6ccbAll being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Mark Brown
maintainerQuoted 11 lines · Mark Brown
Quoted 4 lines · Richard Fitzgerald
The ADC volume is a signed 8-bit number with range -97 to +12, with -97 being mute. Use a
SOC_SINGLE_S8_TLV()to define this and fix theDECLARE_TLV_DB_SCALE()to have the correct start and mute flag.Applied to
torvalds/linux.git master
Thanks!
Ugh, sorry - the script is confused. This is applied to the ASoC tree.