drm/i915/display/tgl+: Dispatch atomic commits instead of front buffer modifications
Subsystems (3)
PATCH 1/4 drm/i915/display/tgl+: Dispatch atomic commits instead of front buffer modifications
PSR2 selective fetch requires plane and transcoder registers to be programed during the vblank to properly update the display and there is no way around it.
We could disable PSR2 at every notification of dirty front buffer from user space but that would hurt the power savings and it would still cause some race conditions between PSR2 exit sequence and atomic commits that causes underruns and glitches.
So from display 12 and newer we will start to do atomic commits every time user space notify that front buffer is dirty and ignore all frontbuffer flushes and invalidates on the PSR side.
--- drivers/gpu/drm/i915/display/intel_cursor.c | 3 ++- drivers/gpu/drm/i915/display/intel_display.c | 7 ++++++- drivers/gpu/drm/i915/display/intel_psr.c | 6 ++++++ 3 files changed, 14 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_cursor.c +2 -1
@@ -617,6 +617,7 @@ intel_legacy_cursor_update(struct drm_plane *_plane, u32 src_w, u32 src_h, struct drm_modeset_acquire_ctx *ctx) { + struct drm_i915_private *i915 = to_i915(_crtc->dev);struct intel_plane *plane =to_intel_plane (_plane);struct intel_crtc *crtc =to_intel_crtc (_crtc); struct intel_plane_state *old_plane_state =
@@ -638,7 +639,7 @@ intel_legacy_cursor_update(struct drm_plane *_plane,*/ if (!crtc_state->hw.active ||intel_crtc_needs_modeset (crtc_state) || crtc_state->update_pipe || crtc_state->bigjoiner || - crtc_state->enable_psr2_sel_fetch) +DISPLAY_VER (i915) >=12 ) goto slow;/*
drivers/gpu/drm/i915/display/intel_display.c +6 -1
@@ -11720,10 +11720,15 @@ static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb, unsigned num_clips) {struct drm_i915_gem_object *obj =intel_fb_obj (fb); +struct drm_i915_private *i915 =to_i915 (obj->base.dev);i915_gem_object_flush_if_display (obj); -intel_frontbuffer_flush (to_intel_frontbuffer (fb),ORIGIN_DIRTYFB ); +if (DISPLAY_VER (i915) >=12 ) +return drm_atomic_helper_dirtyfb (fb, file, flags, color, clips, + num_clips); + +intel_frontbuffer_flush (to_intel_frontbuffer (fb),ORIGIN_DIRTYFB );return 0 ; }
drivers/gpu/drm/i915/display/intel_psr.c +6 -0
@@ -2039,6 +2039,9 @@ void intel_psr_invalidate(struct drm_i915_private *dev_priv, {struct intel_encoder *encoder; +if (DISPLAY_VER (dev_priv) >=12 ) +return ; +if (origin ==ORIGIN_FLIP )return ;
@@ -2123,6 +2126,9 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,continue ; } +if (DISPLAY_VER (dev_priv) >=12 ) +continue ; +mutex_lock (&intel_dp->psr.lock);if (!intel_dp->psr.enabled) {mutex_unlock (&intel_dp->psr.lock);
Signature · 1 line
2.32.0
PATCH 2/4 drm/i915/display: Fix sel fetch plane offset calculation
skl_calc_main_surface_offset() is used to calculate an aligned plane surface address considering the inner framebuffer x and y offset. It can not be used by selective fetch functions becase there is no PLANE_SEL_FETCH_SURF.
So the PLANE_SEL_FETCH_OFFSET.y should only be PLANE_OFFSET.y + damaged_area_within_plane.y1.
This fixes glitches seen in fbcon caused by typing something in the terminal.
BSpec: 55229
--- drivers/gpu/drm/i915/display/intel_psr.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_psr.c +2 -6
@@ -1487,8 +1487,8 @@ void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,struct drm_i915_private *dev_priv =to_i915 (plane->base.dev);enum pipe pipe = plane->pipe;const struct drm_rect *clip; -u32 val, offset; -int ret, x, y; +u32 val; +int x, y;if (!crtc_state->enable_psr2_sel_fetch)return ;
@@ -1508,10 +1508,6 @@ void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,/* TODO: consider auxiliary surfaces */ x = plane_state->uapi.src.x1 >>16 ; y = (plane_state->uapi.src.y1 >>16 ) + clip->y1; - ret =skl_calc_main_surface_offset (plane_state, &x, &y, &offset); -if (ret) -drm_warn_once (&dev_priv->drm,"skl_calc_main_surface_offset() returned %i\n" , - ret); val = y <<16 | x;intel_de_write_fw (dev_priv,PLANE_SEL_FETCH_OFFSET (pipe, plane->id), val);
Signature · 1 line
2.32.0
Re: [Intel-gfx] [PATCH 2/4] drm/i915/display: Fix sel fetch plane offset calculation
Quoted 45 lines · José Roberto de Souza
skl_calc_main_surface_offset()is used to calculate an aligned plane surface address considering the inner framebuffer x and y offset. It can not be used by selective fetch functions becase there is noPLANE_SEL_FETCH_SURF.
So the PLANE_SEL_FETCH_OFFSET.y should only be PLANE_OFFSET.y + damaged_area_within_plane.y1.This fixes glitches seen in fbcon caused by typing something in the terminal.
BSpec: 55229
Cc Gwan-gyeong Mun <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/display/intel_psr.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/display/intel_psr.c +2
-6@@ -1487,8 +1487,8 @@ void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,struct drm_i915_private *dev_priv =to_i915 (plane->base.dev);enum pipe pipe = plane->pipe;const struct drm_rect *clip; -u32 val, offset; -int ret, x, y; +u32 val; +int x, y;if (!crtc_state->enable_psr2_sel_fetch)return ;@@ -1508,10 +1508,6 @@ void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,/* TODO: consider auxiliary surfaces */ x = plane_state->uapi.src.x1 >>16 ; y = (plane_state->uapi.src.y1 >>16 ) + clip->y1; - ret =skl_calc_main_surface_offset (plane_state, &x, &y, &offset); -if (ret) -drm_warn_once (&dev_priv->drm,"skl_calc_main_surface_offset() returned %i\n" , - ret); val = y <<16 | x;intel_de_write_fw (dev_priv,PLANE_SEL_FETCH_OFFSET (pipe, plane->id), val);
PATCH 3/4 drm/i915: Nuke ORIGIN_GTT
In reply to José Roberto de SouzaThere is no users of it, so no need to keep handling for it.
--- drivers/gpu/drm/i915/display/intel_fbc.c | 10 +--------- drivers/gpu/drm/i915/display/intel_frontbuffer.h | 3 +-- 2 files changed, 2 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/display/intel_fbc.c +1 -9
@@ -1129,7 +1129,7 @@ void intel_fbc_invalidate(struct drm_i915_private *dev_priv,if (!HAS_FBC (dev_priv))return ; -if (origin ==ORIGIN_GTT || origin ==ORIGIN_FLIP ) +if (origin ==ORIGIN_FLIP )return ;mutex_lock (&fbc->lock);
@@ -1150,14 +1150,6 @@ void intel_fbc_flush(struct drm_i915_private *dev_priv,if (!HAS_FBC (dev_priv))return ; -/* -* GTT tracking does not nuke the entire cfb -* so don't clear busy_bits set for some other -* reason. -*/ -if (origin ==ORIGIN_GTT ) -return ; -mutex_lock (&fbc->lock); fbc->busy_bits &= ~frontbuffer_bits;
drivers/gpu/drm/i915/display/intel_frontbuffer.h +1 -2
@@ -33,8 +33,7 @@struct drm_i915_private ;enum fb_op_origin { -ORIGIN_GTT , -ORIGIN_CPU , +ORIGIN_CPU =0 ,ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB ,
Signature · 1 line
2.32.0
Re: [Intel-gfx] [PATCH 3/4] drm/i915: Nuke ORIGIN_GTT
Quoted 43 lines · José Roberto de Souza
There is no users of it, so no need to keep handling for it.
Cc Gwan-gyeong Mun <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/display/intel_fbc.c | 10 +--------- drivers/gpu/drm/i915/display/intel_frontbuffer.h | 3 +-- 2 files changed, 2 insertions(+), 11 deletions(-)drivers/gpu/drm/i915/display/intel_fbc.c +1
-9@@ -1129,7 +1129,7 @@ void intel_fbc_invalidate(struct drm_i915_private *dev_priv,if (!HAS_FBC (dev_priv))return ; -if (origin ==ORIGIN_GTT || origin ==ORIGIN_FLIP ) +if (origin ==ORIGIN_FLIP )return ;mutex_lock (&fbc->lock);@@ -1150,14 +1150,6 @@ void intel_fbc_flush(struct drm_i915_private *dev_priv,if (!HAS_FBC (dev_priv))return ; -/* -* GTT tracking does not nuke the entire cfb -* so don't clear busy_bits set for some other -* reason. -*/ -if (origin ==ORIGIN_GTT ) -return ; -mutex_lock (&fbc->lock); fbc->busy_bits &= ~frontbuffer_bits;drivers/gpu/drm/i915/display/intel_frontbuffer.h +0
-0
drivers/gpu/drm/i915/display/intel_frontbuffer.h line 39
Quoted 9 lines
drivers/gpu/drm/i915/display/intel_frontbuffer.h +1
-2@@ -33,8 +33,7 @@struct drm_i915_private ;enum fb_op_origin { -ORIGIN_GTT , -ORIGIN_CPU , +ORIGIN_CPU =0 ,ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB ,
Is this patch absolutely necessary for this series?
Re: [Intel-gfx] [PATCH 3/4] drm/i915: Nuke ORIGIN_GTT
Quoted 46 lines · Gwan-gyeong Mun
Quoted 44 lines · José Roberto de Souza
There is no users of it, so no need to keep handling for it.
Cc Gwan-gyeong Mun <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/display/intel_fbc.c | 10 +--------- drivers/gpu/drm/i915/display/intel_frontbuffer.h | 3 +-- 2 files changed, 2 insertions(+), 11 deletions(-)drivers/gpu/drm/i915/display/intel_fbc.c +1
-9@@ -1129,7 +1129,7 @@ void intel_fbc_invalidate(struct drm_i915_private *dev_priv,if (!HAS_FBC (dev_priv))return ; -if (origin ==ORIGIN_GTT || origin ==ORIGIN_FLIP ) +if (origin ==ORIGIN_FLIP )return ;mutex_lock (&fbc->lock);@@ -1150,14 +1150,6 @@ void intel_fbc_flush(struct drm_i915_private *dev_priv,if (!HAS_FBC (dev_priv))return ; -/* -* GTT tracking does not nuke the entire cfb -* so don't clear busy_bits set for some other -* reason. -*/ -if (origin ==ORIGIN_GTT ) -return ; -mutex_lock (&fbc->lock); fbc->busy_bits &= ~frontbuffer_bits;drivers/gpu/drm/i915/display/intel_frontbuffer.h +0
-0@@ -33,8 +33,7 @@struct drm_i915_private ;
Quoted 9 lines
drivers/gpu/drm/i915/display/intel_frontbuffer.h line 39
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_frontbuffer.h +1
-2enum fb_op_origin { -ORIGIN_GTT , -ORIGIN_CPU , +ORIGIN_CPU =0 ,ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB ,Is this patch absolutely necessary for this series?
Nope, just notice this unused ORIGIN_GTT while debugging.
Gwan-gyeong Mun
Reviewed-byRe: [Intel-gfx] [PATCH 3/4] drm/i915: Nuke ORIGIN_GTT
Quoted 59 lines · Jose
Quoted 46 lines · Gwan-gyeong Mun
Quoted 44 lines · José Roberto de Souza
There is no users of it, so no need to keep handling for it.
Cc Gwan-gyeong Mun <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/display/intel_fbc.c | 10 +--------- drivers/gpu/drm/i915/display/intel_frontbuffer.h | 3 +-- 2 files changed, 2 insertions(+), 11 deletions(-)drivers/gpu/drm/i915/display/intel_fbc.c +1
-9@@ -1129,7 +1129,7 @@ void intel_fbc_invalidate(struct drm_i915_private *dev_priv,if (!HAS_FBC (dev_priv))return ; -if (origin ==ORIGIN_GTT || origin ==ORIGIN_FLIP ) +if (origin ==ORIGIN_FLIP )return ;mutex_lock (&fbc->lock);@@ -1150,14 +1150,6 @@ void intel_fbc_flush(struct drm_i915_private *dev_priv,if (!HAS_FBC (dev_priv))return ; -/* -* GTT tracking does not nuke the entire cfb -* so don't clear busy_bits set for some other -* reason. -*/ -if (origin ==ORIGIN_GTT ) -return ; -mutex_lock (&fbc->lock); fbc->busy_bits &= ~frontbuffer_bits;drivers/gpu/drm/i915/display/intel_frontbuffer.h +0
-0@@ -33,8 +33,7 @@struct drm_i915_private ;Quoted 9 lines
drivers/gpu/drm/i915/display/intel_frontbuffer.h line 39
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_frontbuffer.h +1
-2enum fb_op_origin { -ORIGIN_GTT , -ORIGIN_CPU , +ORIGIN_CPU =0 ,ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB ,Is this patch absolutely necessary for this series?
Nope, just notice this unused
ORIGIN_GTTwhile debugging.
PATCH 4/4 DO_NOT_MERGE: drm/i915/display: Enable PSR2 selective fetch by default
In reply to José Roberto de SouzaOnly to execute tests with PSR2 selective fetch enabled and check what is broken.
IGT tests know to fail with this:
- kms_cursor_legacy: all tests that checks if evasion happend, I have fix for it making cursor_slowpath() returns true for display 12+.
- kms_psr2_su: The pageflip test, it needs to have the damage clip set otherwise it will update the whole screen and the selective blocks will not match with expected.
- kms_psr: psr2_*_(mmap_gtt, mmap_cpu, blt and render), all those tests should be dropped or skipped for display 12+.
--- drivers/gpu/drm/i915/display/intel_psr.c | 9 --------- drivers/gpu/drm/i915/i915_params.h | 2 +- 2 files changed, 1 insertion(+), 10 deletions(-)
drivers/gpu/drm/i915/display/intel_psr.c +0 -9
@@ -877,15 +877,6 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,return false; } -/* -* We are missing the implementation of some workarounds to enabled PSR2 -* in Alderlake_P, until ready PSR2 should be kept disabled. -*/ -if (IS_ALDERLAKE_P (dev_priv)) { -drm_dbg_kms (&dev_priv->drm,"PSR2 is missing the implementation of workarounds\n" ); -return false; - } -if (!transcoder_has_psr2 (dev_priv, crtc_state->cpu_transcoder)) { drm_dbg_kms(&dev_priv->drm, "PSR2 not supported in transcoder %s\n",
drivers/gpu/drm/i915/i915_params.h +1 -1
@@ -55,7 +55,7 @@ struct drm_printer; param(int, enable_fbc, -1, 0600) \ param(int, enable_psr, -1, 0600) \ param(bool, psr_safest_params, false, 0400) \ - param(bool, enable_psr2_sel_fetch, false, 0400) \ + param(bool, enable_psr2_sel_fetch, true, 0400) \ param(int, disable_power_well, -1, 0400) \ param(int, enable_ips, 1, 0600) \param (int, invert_brightness,0 ,0600 ) \
Signature · 1 line
2.32.0
Re: [Intel-gfx] [PATCH 4/4] DO_NOT_MERGE: drm/i915/display: Enable PSR2 selective fetch by default
Quoted 11 lines · José Roberto de Souza
Only to execute tests with PSR2 selective fetch enabled and check what is broken.
IGT tests know to fail with this:
-kms_cursor_legacy: all tests that checks if evasion happend, I have fix for it makingcursor_slowpath()returns true for display 12+.-
kms_psr2_su: The pageflip test, it needs to have the damage clip set otherwise it will update the whole screen and the selective blocks will not match with expected.
kms_psr2_su is a test case for intel PSR2 HW tracking and kms_psr2_sf is used as a test for intel PSR2 manual tracking. Is it necessary to modify kms_psr2_su for testing PSR2 manual tracking?
Quoted 3 lines
-
kms_psr: psr2_*_(mmap_gtt,mmap_cpu, blt and render), all those tests should be dropped or skipped for display 12+.
Could you explain in more detail why we need to skip on display 12+?
Quoted 40 lines
Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/display/intel_psr.c | 9 --------- drivers/gpu/drm/i915/i915_params.h | 2 +- 2 files changed, 1 insertion(+), 10 deletions(-)drivers/gpu/drm/i915/display/intel_psr.c +0
-9@@ -877,15 +877,6 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,return false; } -/* -* We are missing the implementation of some workarounds to enabled PSR2 -* in Alderlake_P, until ready PSR2 should be kept disabled. -*/ -if (IS_ALDERLAKE_P (dev_priv)) { -drm_dbg_kms (&dev_priv->drm,"PSR2 is missing the implementation of workarounds\n" ); -return false; - } -if (!transcoder_has_psr2 (dev_priv, crtc_state->cpu_transcoder)) { drm_dbg_kms(&dev_priv->drm, "PSR2 not supported in transcoder %s\n",drivers/gpu/drm/i915/i915_params.h +1
-1@@ -55,7 +55,7 @@ struct drm_printer; param(int, enable_fbc, -1, 0600) \ param(int, enable_psr, -1, 0600) \ param(bool, psr_safest_params, false, 0400) \ - param(bool, enable_psr2_sel_fetch, false, 0400) \ + param(bool, enable_psr2_sel_fetch, true, 0400) \ param(int, disable_power_well, -1, 0400) \ param(int, enable_ips, 1, 0600) \param (int, invert_brightness,0 ,0600 ) \
Re: [Intel-gfx] [PATCH 4/4] DO_NOT_MERGE: drm/i915/display: Enable PSR2 selective fetch by default
Quoted 9 lines · Gwan-gyeong Mun
Quoted 7 lines · José Roberto de Souza
Only to execute tests with PSR2 selective fetch enabled and check what is broken.
IGT tests know to fail with this:
-kms_cursor_legacy: all tests that checks if evasion happend, I have fix for it makingcursor_slowpath()returns true for display 12+.
Quoted 7 lines
Quoted 4 lines
-
kms_psr2_su: The pageflip test, it needs to have the damage clip set otherwise it will update the whole screen and the selective blocks will not match with expected.
kms_psr2_suis a test case for intel PSR2 HW tracking andkms_psr2_sfis used as a test for intel PSR2 manual tracking. Is it necessary to modifykms_psr2_sufor testing PSR2 manual tracking?
kms_psr2_su is to test that PSR2 is sending selective updates, just adding a couple of lines we can make it work with selective fetch.
Quoted 4 lines
Quoted 3 lines
-
kms_psr: psr2_*_(mmap_gtt,mmap_cpu, blt and render), all those tests should be dropped or skipped for display 12+.Could you explain in more detail why we need to skip on display 12+?
This are stuff that would end up calling intel_psr_invalidate/flush().
Quoted 41 lines
Quoted 41 lines
Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/display/intel_psr.c | 9 --------- drivers/gpu/drm/i915/i915_params.h | 2 +- 2 files changed, 1 insertion(+), 10 deletions(-)drivers/gpu/drm/i915/display/intel_psr.c +0
-9@@ -877,15 +877,6 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,return false; } -/* -* We are missing the implementation of some workarounds to enabled PSR2 -* in Alderlake_P, until ready PSR2 should be kept disabled. -*/ -if (IS_ALDERLAKE_P (dev_priv)) { -drm_dbg_kms (&dev_priv->drm,"PSR2 is missing the implementation of workarounds\n" ); -return false; - } -if (!transcoder_has_psr2 (dev_priv, crtc_state->cpu_transcoder)) { drm_dbg_kms(&dev_priv->drm, "PSR2 not supported in transcoder %s\n",drivers/gpu/drm/i915/i915_params.h +1
-1@@ -55,7 +55,7 @@ struct drm_printer; param(int, enable_fbc, -1, 0600) \ param(int, enable_psr, -1, 0600) \ param(bool, psr_safest_params, false, 0400) \ - param(bool, enable_psr2_sel_fetch, false, 0400) \ + param(bool, enable_psr2_sel_fetch, true, 0400) \ param(int, disable_power_well, -1, 0400) \ param(int, enable_ips, 1, 0600) \param (int, invert_brightness,0 ,0600 ) \
Re: [Intel-gfx] [PATCH 4/4] DO_NOT_MERGE: drm/i915/display: Enable PSR2 selective fetch by default
Quoted 18 lines · Jose
Quoted 9 lines · Gwan-gyeong Mun
Quoted 7 lines · José Roberto de Souza
Only to execute tests with PSR2 selective fetch enabled and check what is broken.
IGT tests know to fail with this:
-kms_cursor_legacy: all tests that checks if evasion happend, I have fix for it makingcursor_slowpath()returns true for display 12+.Quoted 7 lines
Quoted 4 lines
-
kms_psr2_su: The pageflip test, it needs to have the damage clip set otherwise it will update the whole screen and the selective blocks will not match with expected.
kms_psr2_suis a test case for intel PSR2 HW tracking andkms_psr2_sfis used as a test for intel PSR2 manual tracking. Is it necessary to modifykms_psr2_sufor testing PSR2 manual tracking?
Quoted 9 lines
kms_psr2_suis to test that PSR2 is sending selective updates, just adding a couple of lines we can make it work with selective fetch.Quoted 4 lines
Quoted 3 lines
-
kms_psr: psr2_*_(mmap_gtt,mmap_cpu, blt and render), all those tests should be dropped or skipped for display 12+.Could you explain in more detail why we need to skip on display 12+?
This are stuff that would end up calling intel_psr_invalidate/flush().
Thanks for the explanation.
And there is an issue confirmed in local tests, so I leave additional comments.
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/display/intel_psr.c | 9 --------- drivers/gpu/drm/i915/i915_params.h | 2 +- 2 files changed, 1 insertion(+), 10 deletions(-)drivers/gpu/drm/i915/display/intel_psr.c +0
-9@@ -877,15 +877,6 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,return false; } -/* -* We are missing the implementation of some workarounds to enabled PSR2 -* in Alderlake_P, until ready PSR2 should be kept disabled. -*/ -if (IS_ALDERLAKE_P (dev_priv)) { -drm_dbg_kms (&dev_priv->drm,"PSR2 is missing the implementation of workarounds\n" ); -return false; -} -if (!transcoder_has_psr2 (dev_priv, crtc_state->cpu_transcoder)) { drm_dbg_kms(&dev_priv->drm, "PSR2 not supported in transcoder %s\n",drivers/gpu/drm/i915/i915_params.h +0
-0
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/i915_params.h struct drm_printer; · line 58
Quoted 8 lines
drivers/gpu/drm/i915/i915_params.h +1
-1@@ -55,7 +55,7 @@ struct drm_printer; param(int, enable_fbc, -1, 0600) \ param(int, enable_psr, -1, 0600) \ param(bool, psr_safest_params, false, 0400) \ -param (bool, enable_psr2_sel_fetch, false,0400 ) \ +param (bool, enable_psr2_sel_fetch, true,0400 ) \
If we do not modify this part and do not enable it by default at boot time as shown in the original code below, param(bool, enable_psr2_sel_fetch, false, 0400) \
when we execute the kms_psr2_sf test case of igt, the FIFO underrun as below still occurs.
i915 0000:00:02.0: [drm] *ERROR* CPU pipe A FIFO underrun: port,transcoder,
When PSR2 panel is used, PSR1 is enabled by default when enable_psr2_sel_fetch is not enabled by default.
And when kms_psr2_sf is executed, the mode is changed to PSR2, and when kms_psr2_sf is terminated, PSR2 is deactivated and PSR1 is re-enabled. At this point. I suspect there is a problem.
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
drivers/gpu/drm/i915/i915_params.h +0
-0param(int, disable_power_well, -1, 0400) \ param(int, enable_ips, 1, 0600) \param (int, invert_brightness,0 ,0600 ) \
Re: [Intel-gfx] [PATCH 4/4] DO_NOT_MERGE: drm/i915/display: Enable PSR2 selective fetch by default
Quoted 77 lines · Gwan-gyeong Mun
Quoted 18 lines · Jose
Quoted 9 lines · Gwan-gyeong Mun
Quoted 7 lines · José Roberto de Souza
Only to execute tests with PSR2 selective fetch enabled and check what is broken.
IGT tests know to fail with this:
-kms_cursor_legacy: all tests that checks if evasion happend, I have fix for it makingcursor_slowpath()returns true for display 12+.Quoted 7 lines
Quoted 4 lines
-
kms_psr2_su: The pageflip test, it needs to have the damage clip set otherwise it will update the whole screen and the selective blocks will not match with expected.
kms_psr2_suis a test case for intel PSR2 HW tracking andkms_psr2_sfis used as a test for intel PSR2 manual tracking. Is it necessary to modifykms_psr2_sufor testing PSR2 manual tracking?Quoted 9 lines
kms_psr2_suis to test that PSR2 is sending selective updates, just adding a couple of lines we can make it work with selective fetch.Quoted 4 lines
Quoted 3 lines
-
kms_psr: psr2_*_(mmap_gtt,mmap_cpu, blt and render), all those tests should be dropped or skipped for display 12+.Could you explain in more detail why we need to skip on display 12+?
This are stuff that would end up calling intel_psr_invalidate/flush().
Thanks for the explanation.
And there is an issue confirmed in local tests, so I leave additional comments.Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/display/intel_psr.c | 9 --------- drivers/gpu/drm/i915/i915_params.h | 2 +- 2 files changed, 1 insertion(+), 10 deletions(-)drivers/gpu/drm/i915/display/intel_psr.c +0
-9@@ -877,15 +877,6 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,return false; } -/* -* We are missing the implementation of some workarounds to enabled PSR2 -* in Alderlake_P, until ready PSR2 should be kept disabled. -*/ -if (IS_ALDERLAKE_P (dev_priv)) { -drm_dbg_kms (&dev_priv->drm,"PSR2 is missing the implementation of workarounds\n" ); -return false; -} -if (!transcoder_has_psr2 (dev_priv, crtc_state->cpu_transcoder)) { drm_dbg_kms(&dev_priv->drm, "PSR2 not supported in transcoder %s\n",drivers/gpu/drm/i915/i915_params.h +0
-0Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/i915_params.h struct drm_printer; · line 58
Quoted 8 lines
drivers/gpu/drm/i915/i915_params.h +1
-1@@ -55,7 +55,7 @@ struct drm_printer; param(int, enable_fbc, -1, 0600) \ param(int, enable_psr, -1, 0600) \ param(bool, psr_safest_params, false, 0400) \ -param (bool, enable_psr2_sel_fetch, false,0400 ) \ +param (bool, enable_psr2_sel_fetch, true,0400 ) \If we do not modify this part and do not enable it by default at boot time as shown in the original code below,
param(bool, enable_psr2_sel_fetch, false, 0400)\when we execute the
kms_psr2_sftest case of igt, the FIFO underrun as below still occurs.
Quoted 7 lines
i915 0000:00:02.0: [drm] *ERROR* CPU pipe A FIFO underrun: port,transcoder,
When PSR2 panel is used, PSR1 is enabled by default when
enable_psr2_sel_fetchis not enabled by default.
And whenkms_psr2_sfis executed, the mode is changed to PSR2, and whenkms_psr2_sfis terminated, PSR2 is deactivated and PSR1 is re-enabled. At this point. I suspect there is a problem.
Was able to reproduce this even with enable_psr2_sel_fetch set to true.
Added some debug messages to intel_psr_exit() and intel_psr_activate() and those functions are not called and the underrun still happens.
Could be a regression recently introduced because I was not seeing this underrun a few weeks ago.
Anyways this underrun happens with and without(just doing the changes to allow PSR2 in alderlake-P in intel_psr2_config_valid()) this patches.
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 5 lines
drivers/gpu/drm/i915/i915_params.h +0
-0param(int, disable_power_well, -1, 0400) \ param(int, enable_ips, 1, 0600) \param (int, invert_brightness,0 ,0600 ) \
Patchwork
CI[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/4] drm/i915/display/tgl+: Dispatch atomic commits instead of front buffer modifications
In reply to José Roberto de Souza== Series Details ==
== Series Details ==
Series: series starting with [1/4] drm/i915/display/tgl+: Dispatch atomic commits instead of front buffer modifications
URL : https://patchwork.freedesktop.org/series/93252/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip
762853c5a7c2 drm/i915/display/tgl+: Dispatch atomic commits instead of front buffer modifications
d75f9be16572 drm/i915/display: Fix sel fetch plane offset calculation
06de84df5401 drm/i915: Nuke ORIGIN_GTT
87fee2709b10 DO_NOT_MERGE: drm/i915/display: Enable PSR2 selective fetch by default
-:14: WARNING:TYPO_SPELLING: 'happend' may be misspelled - perhaps 'happened'?
#14:
- kms_cursor_legacy: all tests that checks if evasion happend, I have
^^^^^^^total: 0 errors, 1 warnings, 0 checks, 23 lines checked
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BAT: failure for series starting with [1/4] drm/i915/display/tgl+: Dispatch atomic commits instead of front buffer modifications
In reply to José Roberto de Souza== Series Details ==
== Series Details ==
Series: series starting with [1/4] drm/i915/display/tgl+: Dispatch atomic commits instead of front buffer modifications
URL : https://patchwork.freedesktop.org/series/93252/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_10427 -> Patchwork_20753
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_20753 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_20753, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20753/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_20753:
### IGT changes ###
#### Possible regressions ####
* igt@kms_cursor_legacy@basic-flip-before-cursor-atomic:
- fi-tgl-1115g4: [PASS][1] -> [FAIL][2] +3 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10427/fi-tgl-1115g4/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20753/fi-tgl-1115g4/igt@[email protected]
* igt@kms_cursor_legacy@basic-flip-before-cursor-legacy:
- fi-tgl-u2: [PASS][3] -> [FAIL][4] +3 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10427/fi-tgl-u2/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20753/fi-tgl-u2/igt@[email protected]
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* igt@kms_cursor_legacy@basic-flip-before-cursor-atomic:
- {fi-tgl-dsi}: [PASS][5] -> [FAIL][6] +3 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10427/fi-tgl-dsi/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20753/fi-tgl-dsi/igt@[email protected]
Known issues
------------
Here are the changes found in Patchwork_20753 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_cs_nop@sync-fork-compute0:
- fi-kbl-soraka: NOTRUN -> [SKIP][7] ([fdo#109271]) +10 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20753/fi-kbl-soraka/igt@amdgpu/[email protected]
* igt@i915_selftest@live@execlists:
- fi-icl-y: [PASS][8] -> [DMESG-FAIL][9] ([i915#1993])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10427/fi-icl-y/igt@i915_selftest@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20753/fi-icl-y/igt@i915_selftest@[email protected]
#### Possible fixes ####
* igt@gem_exec_suspend@basic-s3:
- fi-tgl-1115g4: [FAIL][10] ([i915#1888]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10427/fi-tgl-1115g4/igt@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20753/fi-tgl-1115g4/igt@[email protected]
* igt@i915_selftest@live@workarounds:
- fi-tgl-u2: [DMESG-WARN][12] ([i915#2867]) -> [PASS][13] +16 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10427/fi-tgl-u2/igt@i915_selftest@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20753/fi-tgl-u2/igt@i915_selftest@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#1993]: https://gitlab.freedesktop.org/drm/intel/issues/1993
[i915#2867]: https://gitlab.freedesktop.org/drm/intel/issues/2867
Participating hosts (37 -> 33)
------------------------------
Missing (4): fi-bdw-samus fi-bsw-cyan bat-jsl-1 fi-hsw-4200u
Build changes
-------------
* Linux: CI_DRM_10427 -> Patchwork_20753
CI-20190529: 20190529
CI_DRM_10427: e5efc20bce6b7996df9bdc720796f8713a45701a @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_6159: 6135b9cc319ed965e3aafb5b2ae2abf4762a06b2 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_20753: 87fee2709b10c39c5cd3c558f356f6821d01df03 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
87fee2709b10 DO_NOT_MERGE: drm/i915/display: Enable PSR2 selective fetch by default 06de84df5401 drm/i915: Nuke ORIGIN_GTTd75f9be16572 drm/i915/display: Fix sel fetch plane offset calculation 762853c5a7c2 drm/i915/display/tgl+: Dispatch atomic commits instead of front buffer modifications
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20753/index.html
Quoted 4 lines · José Roberto de Souza
PSR2 selective fetch requires plane and transcoder registers to be programed during the vblank to properly update the display and there is no way around it.
Quoted 8 lines
We could disable PSR2 at every notification of dirty front buffer from user space but that would hurt the power savings and it would still cause some race conditions between PSR2 exit sequence and atomic commits that causes underruns and glitches.
So from display 12 and newer we will start to do atomic commits every time user space notify that front buffer is dirty and ignore all frontbuffer flushes and invalidates on the PSR side.
Quoted 77 lines
Cc Daniel Vetter <[email protected]>Cc Gwan-gyeong Mun <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/display/intel_cursor.c | 3 ++- drivers/gpu/drm/i915/display/intel_display.c | 7 ++++++- drivers/gpu/drm/i915/display/intel_psr.c | 6 ++++++ 3 files changed, 14 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_cursor.c +2
-1@@ -617,6 +617,7 @@ intel_legacy_cursor_update(struct drm_plane *_plane, u32 src_w, u32 src_h, struct drm_modeset_acquire_ctx *ctx) { + struct drm_i915_private *i915 = to_i915(_crtc->dev);struct intel_plane *plane =to_intel_plane (_plane);struct intel_crtc *crtc =to_intel_crtc (_crtc); struct intel_plane_state *old_plane_state =@@ -638,7 +639,7 @@ intel_legacy_cursor_update(struct drm_plane *_plane,*/ if (!crtc_state->hw.active ||intel_crtc_needs_modeset (crtc_state) || crtc_state->update_pipe || crtc_state->bigjoiner || - crtc_state->enable_psr2_sel_fetch) +DISPLAY_VER (i915) >=12 ) goto slow;/* drivers/gpu/drm/i915/display/intel_display.c +6
-1@@ -11720,10 +11720,15 @@ static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb, unsigned num_clips) {struct drm_i915_gem_object *obj =intel_fb_obj (fb); +struct drm_i915_private *i915 =to_i915 (obj->base.dev);i915_gem_object_flush_if_display (obj); -intel_frontbuffer_flush (to_intel_frontbuffer (fb),ORIGIN_DIRTYFB ); +if (DISPLAY_VER (i915) >=12 ) +return drm_atomic_helper_dirtyfb (fb, file, flags, color, clips, + num_clips); + +intel_frontbuffer_flush (to_intel_frontbuffer (fb),ORIGIN_DIRTYFB );return 0 ; }drivers/gpu/drm/i915/display/intel_psr.c +6
-0@@ -2039,6 +2039,9 @@ void intel_psr_invalidate(struct drm_i915_private *dev_priv, {struct intel_encoder *encoder; +if (DISPLAY_VER (dev_priv) >=12 ) +return ; +if (origin ==ORIGIN_FLIP )return ;@@ -2123,6 +2126,9 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,continue ; } +if (DISPLAY_VER (dev_priv) >=12 ) +continue ; +mutex_lock (&intel_dp->psr.lock);if (!intel_dp->psr.enabled) {mutex_unlock (&intel_dp->psr.lock);
Quoted 6 lines · Jose
Quoted 4 lines · José Roberto de Souza
PSR2 selective fetch requires plane and transcoder registers to be programed during the vblank to properly update the display and there is no way around it.
Quoted 8 lines
Quoted 8 lines
We could disable PSR2 at every notification of dirty front buffer from user space but that would hurt the power savings and it would still cause some race conditions between PSR2 exit sequence and atomic commits that causes underruns and glitches.
So from display 12 and newer we will start to do atomic commits every time user space notify that front buffer is dirty and ignore all frontbuffer flushes and invalidates on the PSR side.
So I filed a JIRA about this a while ago, and:
- This should be done on gen9 (or maybe gen10+), because we stopped having userspace that was busted. Would be good to check whether we can't push this down further even.
- We need to disable the entire intel_frontbuffer.c interface/uapi for _all_ things. It's a horrendous uapi, and it needs to die.
You're already touching intel_user_framebuffer_dirty, so the other pieces really should be done too. Maybe make a macro or function or something so that we have a consistent check for which platforms still have to support frontbuffer tracking.
-Daniel
Quoted 81 lines
Cc Rodrigo Vivi <[email protected]>Cc Jani Nikula <[email protected]>Quoted 77 lines
Cc Daniel Vetter <[email protected]>Cc Gwan-gyeong Mun <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/display/intel_cursor.c | 3 ++- drivers/gpu/drm/i915/display/intel_display.c | 7 ++++++- drivers/gpu/drm/i915/display/intel_psr.c | 6 ++++++ 3 files changed, 14 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_cursor.c +2
-1@@ -617,6 +617,7 @@ intel_legacy_cursor_update(struct drm_plane *_plane, u32 src_w, u32 src_h, struct drm_modeset_acquire_ctx *ctx) { + struct drm_i915_private *i915 = to_i915(_crtc->dev);struct intel_plane *plane =to_intel_plane (_plane);struct intel_crtc *crtc =to_intel_crtc (_crtc); struct intel_plane_state *old_plane_state =@@ -638,7 +639,7 @@ intel_legacy_cursor_update(struct drm_plane *_plane,*/ if (!crtc_state->hw.active ||intel_crtc_needs_modeset (crtc_state) || crtc_state->update_pipe || crtc_state->bigjoiner || - crtc_state->enable_psr2_sel_fetch) +DISPLAY_VER (i915) >=12 ) goto slow;/* drivers/gpu/drm/i915/display/intel_display.c +6
-1@@ -11720,10 +11720,15 @@ static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb, unsigned num_clips) {struct drm_i915_gem_object *obj =intel_fb_obj (fb); +struct drm_i915_private *i915 =to_i915 (obj->base.dev);i915_gem_object_flush_if_display (obj); -intel_frontbuffer_flush (to_intel_frontbuffer (fb),ORIGIN_DIRTYFB ); +if (DISPLAY_VER (i915) >=12 ) +return drm_atomic_helper_dirtyfb (fb, file, flags, color, clips, + num_clips); + +intel_frontbuffer_flush (to_intel_frontbuffer (fb),ORIGIN_DIRTYFB );return 0 ; }drivers/gpu/drm/i915/display/intel_psr.c +6
-0@@ -2039,6 +2039,9 @@ void intel_psr_invalidate(struct drm_i915_private *dev_priv, {struct intel_encoder *encoder; +if (DISPLAY_VER (dev_priv) >=12 ) +return ; +if (origin ==ORIGIN_FLIP )return ;@@ -2123,6 +2126,9 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,continue ; } +if (DISPLAY_VER (dev_priv) >=12 ) +continue ; +mutex_lock (&intel_dp->psr.lock);if (!intel_dp->psr.enabled) {mutex_unlock (&intel_dp->psr.lock);
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch