Skip to contentSkip to conversation

iio: hid-sensor-press: Add timestamp channel

PATCH In review Ye Xiang 2 participants 2 messages Jul 31, 2021 – Aug 8, 2021

Subsystems (3)
lore
Share & tools
lore

Ye Xiang

author
#0 lore raw

PATCH 1/1 iio: hid-sensor-press: Add timestamp channel

Each sample has a timestamp field with this change. This timestamp may be from the sensor hub when present or local kernel timestamp. The unit of timestamp is nanosecond.

---
 drivers/iio/pressure/hid-sensor-press.c | 40 +++++++++++++++----------
 1 file changed, 24 insertions(+), 16 deletions(-)
drivers/iio/pressure/hid-sensor-press.c +24 -16
index c416d261e3e3..b365483bd09e 100644
@@ -16,17 +16,24 @@
 #include <linux/iio/buffer.h>
 #include "../common/hid-sensors/hid-sensor-trigger.h"
 
-#define CHANNEL_SCAN_INDEX_PRESSURE 0
+enum {
+	CHANNEL_SCAN_INDEX_PRESSURE,
+	CHANNEL_SCAN_INDEX_TIMESTAMP,
+};
 
 struct press_state {
 	struct hid_sensor_hub_callbacks callbacks;
 	struct hid_sensor_common common_attributes;
 	struct hid_sensor_hub_attribute_info press_attr;
-	u32 press_data;
+	struct {
+		u32 press_data;
+		u64 timestamp __aligned(8);
+	} scan;
 	int scale_pre_decml;
 	int scale_post_decml;
 	int scale_precision;
 	int value_offset;
+	s64 timestamp;
 };
 
 static const u32 press_sensitivity_addresses[] = {
@@ -44,7 +51,9 @@ static const struct iio_chan_spec press_channels[] = {
 		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
 		BIT(IIO_CHAN_INFO_HYSTERESIS),
 		.scan_index = CHANNEL_SCAN_INDEX_PRESSURE,
-	}
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP)
+
 };
 
 /* Adjust channel real bits based on report descriptor */
@@ -157,14 +166,6 @@ static const struct iio_info press_info = {
 	.write_raw = &press_write_raw,
 };
 
-/* Function to push data to buffer */
-static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
-					int len)
-{
-	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
-	iio_push_to_buffers(indio_dev, data);
-}
-
 /* Callback handler to send event after all samples are received and captured */
 static int press_proc_event(struct hid_sensor_hub_device *hsdev,
 				unsigned usage_id,
@@ -174,10 +175,13 @@ static int press_proc_event(struct hid_sensor_hub_device *hsdev,
 	struct press_state *press_state = iio_priv(indio_dev);
 
 	dev_dbg(&indio_dev->dev, "press_proc_event\n");
-	if (atomic_read(&press_state->common_attributes.data_ready))
-		hid_sensor_push_data(indio_dev,
-				&press_state->press_data,
-				sizeof(press_state->press_data));
+	if (atomic_read(&press_state->common_attributes.data_ready)) {
+		if (!press_state->timestamp)
+			press_state->timestamp = iio_get_time_ns(indio_dev);
+
+		iio_push_to_buffers_with_timestamp(
+			indio_dev, &press_state->scan, press_state->timestamp);
+	}
 
 	return 0;
 }
@@ -194,9 +198,13 @@ static int press_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 	switch (usage_id) {
 	case HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE:
-		press_state->press_data = *(u32 *)raw_data;
+		press_state->scan.press_data = *(u32 *)raw_data;
 		ret = 0;
 		break;
+	case HID_USAGE_SENSOR_TIME_TIMESTAMP:
+		press_state->timestamp = hid_sensor_convert_timestamp(
+			&press_state->common_attributes, *(s64 *)raw_data);
+		break;
 	default:
 		break;
 	}
Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 5 lines · On Sat, 31 Jul 2021 11:25:56 +0800 Ye Xiang <[email protected]> wrote:

Each sample has a timestamp field with this change. This timestamp may be from the sensor hub when present or local kernel timestamp. The unit of timestamp is nanosecond.

Applied to the togreg branch of iio.git and pushed out as testing to let 0-day see what it can find.

Thanks,

Jonathan

Quoted 94 lines
---
 drivers/iio/pressure/hid-sensor-press.c | 40 +++++++++++++++----------
 1 file changed, 24 insertions(+), 16 deletions(-)
drivers/iio/pressure/hid-sensor-press.c +24 -16
index c416d261e3e3..b365483bd09e 100644
@@ -16,17 +16,24 @@
 #include <linux/iio/buffer.h>
 #include "../common/hid-sensors/hid-sensor-trigger.h"
 
-#define CHANNEL_SCAN_INDEX_PRESSURE 0
+enum {
+	CHANNEL_SCAN_INDEX_PRESSURE,
+	CHANNEL_SCAN_INDEX_TIMESTAMP,
+};
 
 struct press_state {
 	struct hid_sensor_hub_callbacks callbacks;
 	struct hid_sensor_common common_attributes;
 	struct hid_sensor_hub_attribute_info press_attr;
-	u32 press_data;
+	struct {
+		u32 press_data;
+		u64 timestamp __aligned(8);
+	} scan;
 	int scale_pre_decml;
 	int scale_post_decml;
 	int scale_precision;
 	int value_offset;
+	s64 timestamp;
 };
 
 static const u32 press_sensitivity_addresses[] = {
@@ -44,7 +51,9 @@ static const struct iio_chan_spec press_channels[] = {
 		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
 		BIT(IIO_CHAN_INFO_HYSTERESIS),
 		.scan_index = CHANNEL_SCAN_INDEX_PRESSURE,
-	}
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP)
+
 };
 
 /* Adjust channel real bits based on report descriptor */
@@ -157,14 +166,6 @@ static const struct iio_info press_info = {
 	.write_raw = &press_write_raw,
 };
 
-/* Function to push data to buffer */
-static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
-					int len)
-{
-	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
-	iio_push_to_buffers(indio_dev, data);
-}
-
 /* Callback handler to send event after all samples are received and captured */
 static int press_proc_event(struct hid_sensor_hub_device *hsdev,
 				unsigned usage_id,
@@ -174,10 +175,13 @@ static int press_proc_event(struct hid_sensor_hub_device *hsdev,
 	struct press_state *press_state = iio_priv(indio_dev);
 
 	dev_dbg(&indio_dev->dev, "press_proc_event\n");
-	if (atomic_read(&press_state->common_attributes.data_ready))
-		hid_sensor_push_data(indio_dev,
-				&press_state->press_data,
-				sizeof(press_state->press_data));
+	if (atomic_read(&press_state->common_attributes.data_ready)) {
+		if (!press_state->timestamp)
+			press_state->timestamp = iio_get_time_ns(indio_dev);
+
+		iio_push_to_buffers_with_timestamp(
+			indio_dev, &press_state->scan, press_state->timestamp);
+	}
 
 	return 0;
 }
@@ -194,9 +198,13 @@ static int press_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 	switch (usage_id) {
 	case HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE:
-		press_state->press_data = *(u32 *)raw_data;
+		press_state->scan.press_data = *(u32 *)raw_data;
 		ret = 0;
 		break;
+	case HID_USAGE_SENSOR_TIME_TIMESTAMP:
+		press_state->timestamp = hid_sensor_convert_timestamp(
+			&press_state->common_attributes, *(s64 *)raw_data);
+		break;
 	default:
 		break;
 	}