dt-bindings: net: can: c_can: convert to json-schema
Subsystems (4)
PATCH v4 1/1 dt-bindings: net: can: c_can: convert to json-schema
Convert the Bosch C_CAN/D_CAN controller device tree binding documentation to json-schema.
Document missing properties.
Remove "ti,hwmods" as it is no longer used in TI dts. Make "clocks" required as it is used in all dts. Correct nodename in the example.
---
Changes in v4:
- Fix 'syscon-raminit' property to pass checks.
- Drop 'status' property from CAN node of examples.
- Replace CAN node of examples (compatible = "bosch,d_can") with a recent version taken from socfpga.dtsi dts.
- Update the 'interrupts' property due to the examples updating.
- Add 'resets' property due to the examples updating.
Changes in v3:
- Add type (phandle-array) and size (maxItems: 2) to syscon-raminit property.
Changes in v2:
- Drop Documentation references.
.../bindings/net/can/bosch,c_can.yaml | 94 +++++++++++++++++++ .../devicetree/bindings/net/can/c_can.txt | 65 ------------- 2 files changed, 94 insertions(+), 65 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/can/bosch,c_can.yaml delete mode 100644 Documentation/devicetree/bindings/net/can/c_can.txt
Documentation/devicetree/bindings/net/can/bosch,c_can.yaml new file +94 -0
@@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch C_CAN/D_CAN controller Device Tree Bindings + +description: Bosch C_CAN/D_CAN controller for CAN bus + +maintainers: + - Dario Binacchi <[email protected]> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - bosch,c_can + - bosch,d_can + - ti,dra7-d_can + - ti,am3352-d_can + - items: + - enum: + - ti,am4372-d_can + - const: ti,am3352-d_can + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 4 + + power-domains: + description: | + Should contain a phandle to a PM domain provider node and an args + specifier containing the DCAN device id value. It's mandatory for + Keystone 2 66AK2G SoCs only. + maxItems: 1 + + clocks: + description: | + CAN functional clock phandle. + maxItems: 1 + + clock-names: + maxItems: 1 + + syscon-raminit: + description: | + Handle to system control region that contains the RAMINIT register, + register offset to the RAMINIT register and the CAN instance number (0 + offset). + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: The phandle to the system control region. + - description: The register offset. + - description: The CAN instance number. + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/altr,rst-mgr.h> + + can@ffc00000 { + compatible = "bosch,d_can"; + reg = <0xffc00000 0x1000>; + interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; + clocks = <&can0_clk>; + resets = <&rst CAN0_RESET>; + }; + - | + can@0 { + compatible = "ti,am3352-d_can"; + reg = <0x0 0x2000>; + clocks = <&dcan1_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 1>; + interrupts = <55>; + };
Documentation/devicetree/bindings/net/can/c_can.txt deleted +0 -65
65 lines not on this page · raw message
Signature · 1 line
2.17.1
Rob Herring
maintainerQuoted 64 lines · Dario Binacchi
Convert the Bosch C_CAN/D_CAN controller device tree binding documentation to json-schema.
Document missing properties.
Remove "ti,hwmods" as it is no longer used in TI dts. Make "clocks" required as it is used in all dts. Correct nodename in the example.Signed-off-by Dario Binacchi <[email protected]>---
Changes in v4:
- Fix 'syscon-raminit' property to pass checks.
- Drop 'status' property from CAN node of examples.
- Replace CAN node of examples (compatible = "bosch,d_can") with a recent version taken fromsocfpga.dtsidts.
- Update the 'interrupts' property due to the examples updating.
- Add 'resets' property due to the examples updating.Changes in v3:
- Add type (phandle-array) and size (maxItems: 2) to syscon-raminit property.Changes in v2:
- Drop Documentation references..../bindings/net/can/bosch,c_can.yaml | 94 +++++++++++++++++++ .../devicetree/bindings/net/can/c_can.txt | 65 ------------- 2 files changed, 94 insertions(+), 65 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/can/bosch,c_can.yaml delete mode 100644 Documentation/devicetree/bindings/net/can/c_can.txtDocumentation/devicetree/bindings/net/can/bosch,c_can.yaml new file +25
-0@@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch C_CAN/D_CAN controller Device Tree Bindings + +description: Bosch C_CAN/D_CAN controller for CAN bus + +maintainers: + - Dario Binacchi <[email protected]> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - bosch,c_can + - bosch,d_can + - ti,dra7-d_can + - ti,am3352-d_can + - items:
Documentation/devicetree/bindings/net/can/bosch,c_can.yaml line 35
Quoted 10 lines
Documentation/devicetree/bindings/net/can/bosch,c_can.yaml new file +10
-0+ - enum: + - ti,am4372-d_can + - const: ti,am3352-d_can + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 4
Well, now you have to define what each interrupt is.
Quoted 59 lines
Documentation/devicetree/bindings/net/can/bosch,c_can.yaml new file +59
-0+ + power-domains: + description: | + Should contain a phandle to a PM domain provider node and an args + specifier containing the DCAN device id value. It's mandatory for + Keystone 2 66AK2G SoCs only. + maxItems: 1 + + clocks: + description: | + CAN functional clock phandle. + maxItems: 1 + + clock-names: + maxItems: 1 + + syscon-raminit: + description: | + Handle to system control region that contains the RAMINIT register, + register offset to the RAMINIT register and the CAN instance number (0 + offset). + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: The phandle to the system control region. + - description: The register offset. + - description: The CAN instance number. + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/altr,rst-mgr.h> + + can@ffc00000 { + compatible = "bosch,d_can"; + reg = <0xffc00000 0x1000>; + interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; + clocks = <&can0_clk>; + resets = <&rst CAN0_RESET>; + }; + - | + can@0 { + compatible = "ti,am3352-d_can"; + reg = <0x0 0x2000>; + clocks = <&dcan1_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 1>; + interrupts = <55>; + };