Skip to contentSkip to conversation

drivers/net/usb: Remove all strcpy() uses

PATCH New Len Baker 1 participant 1 message Aug 1, 2021

Subsystems (5)
lore
Share & tools
lore

Len Baker

author
#0 lore raw

PATCH 1/1 drivers/net/usb: Remove all strcpy() uses

strcpy() performs no bounds checking on the destination buffer. This could result in linear overflows beyond the end of the buffer, leading to all kinds of misbehaviors. The safe replacement is strscpy().

---
This is a task of the KSPP [1]

[1] https://github.com/KSPP/linux/issues/88

 drivers/net/usb/ipheth.c | 2 +-
 drivers/net/usb/usbnet.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)
drivers/net/usb/ipheth.c +1 -1
index 207e59e74935..06e2181e5810 100644
@@ -443,7 +443,7 @@ static int ipheth_probe(struct usb_interface *intf,
 
 	netdev->netdev_ops = &ipheth_netdev_ops;
 	netdev->watchdog_timeo = IPHETH_TX_TIMEOUT;
-	strcpy(netdev->name, "eth%d");
+	strscpy(netdev->name, "eth%d", sizeof(netdev->name));
 
 	dev = netdev_priv(netdev);
 	dev->udev = udev;
drivers/net/usb/usbnet.c +4 -4
index 470e1c1e6353..840c1c2ab16a 100644
@@ -1725,7 +1725,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	dev->interrupt_count = 0;
 
 	dev->net = net;
-	strcpy (net->name, "usb%d");
+	strscpy(net->name, "usb%d", sizeof(net->name));
 	memcpy (net->dev_addr, node_id, sizeof node_id);
 
 	/* rx and tx sides can use different message sizes;
@@ -1752,13 +1752,13 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 		if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
 		    ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
 		     (net->dev_addr [0] & 0x02) == 0))
-			strcpy (net->name, "eth%d");
+			strscpy(net->name, "eth%d", sizeof(net->name));
 		/* WLAN devices should always be named "wlan%d" */
 		if ((dev->driver_info->flags & FLAG_WLAN) != 0)
-			strcpy(net->name, "wlan%d");
+			strscpy(net->name, "wlan%d", sizeof(net->name));
 		/* WWAN devices should always be named "wwan%d" */
 		if ((dev->driver_info->flags & FLAG_WWAN) != 0)
-			strcpy(net->name, "wwan%d");
+			strscpy(net->name, "wwan%d", sizeof(net->name));
 
 		/* devices that cannot do ARP */
 		if ((dev->driver_info->flags & FLAG_NOARP) != 0)

--
2.25.1