Enable Linux guests on Hyper-V on ARM64
Subsystems (4)
v11 cover Enable Linux guests on Hyper-V on ARM64
This series enables Linux guests running on Hyper-V on ARM64 hardware. New ARM64-specific code in arch/arm64/hyperv initializes Hyper-V and its hypercall mechanism. Existing architecture independent drivers for Hyper-V's VMbus and synthetic devices just work when built for ARM64. Hyper-V code is built and included in the image and modules only if CONFIG_HYPERV is enabled.
The five patches are organized as follows:
1) Add definitions and functions for making Hyper-V hypercalls and getting/setting virtual processor registers provided by Hyper-V
2) Add the function needed by the arch independent VMbus driver for reporting a panic to Hyper-V.
3) Add Hyper-V initialization code and utility functions that report Hyper-v status.
4) Export screen_info so it may be used by the Hyper-V frame buffer driver built as a module. It is already exported for x86, powerpc, and alpha architectures.
5) Make CONFIG_HYPERV selectable on ARM64 in addition to x86/x64.
Hyper-V on ARM64 runs with a 4 Kbyte page size, but allows guests with 4K/16K/64K page size. Linux guests with this patch series work with all three supported ARM64 page sizes.
The Hyper-V vPCI driver at drivers/pci/host/pci-hyperv.c has x86/x64-specific code and is not being built for ARM64. Enabling Hyper-V vPCI devices on ARM64 is in progress via a separate set of patches.
This patch set is based on the linux-next20210720 code tree.
Changes in v11:
* Drop the previous Patch 1 as the fixes have already been separately accepted upstream.
* Drop the previous Patch 3 for enabling Hyper-V enlightened clocks/timers. Hyper-V is now offering the full ARM64 architectural Generic Timer in guest VMs, so the existing arch_arch_timer.c driver just works. [Mark Rutland, Marc Zyngier]
* Simplified the previous Patch 4 and Patch 5 (now Patch 2 and 3) by sharing more code between the x86 and ARM64 architectures.
* Combined hyperv_early_init() and hyperv_init() into a single initialization function that runs as an early_initcall. This is possible because the Hyper-V enlightened clocks/timers no longer need to be initialized early in the boot sequence.
Changes in v10:
* Drop previous Patch 1 for SMCCC v1.2 HVC calls in favor of Sudeep Holla's patch [Mark Rutland]
* Use new helper functions in 5.13 for checking Hyper-V hypercall return status
* Set up per-CPU hypercall argument page that is now used by the Hyper-V balloon driver
* Rebase on 5.13-RC1
Changes in v9:
* Added Patch 1 to enable making an SMCCC compliant hypercall that returns results in other than registers X0 thru X3, per version 1.2 and later of the SMCCC spec.
* Using the ability to return results in registers X6 and X7, converted hv_get_vpreg_128() to use a "fast" hypercall that passes inputs and outputs in registers, and in doing so eliminated a lot of memory allocation complexity.
* Cleaned up some extra blank lines and use of spaces in aligning local variables. [Sunil Muthuswamy]
* Based on discussion about future directions, reverted the population of hv_vp_index array to use a cpuhp state instead of a hypercall, which is like it was in v7 and earlier.
Changes in v8:
* Removed a lot of code based on refactoring the boundary between arch independent and arch dependent code for Hyper-V, per comments from Arnd Bergmann. The removed code was either duplicated on the x86 side, or has been folded into architecture independent code as not really being architecture dependent.
* Added config dependency on !CONFIG_CPU_BIG_ENDIAN [Arnd Bergmann]
* Reworked the approach to Hyper-V initialization. The functionality is the same, but is now structured like the Xen code with an early init function called in setup_arch() and an early initcall to finish the initialization. [Arnd Bergmann]
Changes in v7:
* Separately upstreamed split of hyperv-tlfs.h into arch dependent and independent versions. In this patch set, update the ARM64 hyperv-tlfs.h to include architecture independent definitions. This approach eliminates a lot of lines of otherwise duplicated code on the ARM64 side.
* Break ARM64 mshyperv.h into smaller pieces. Have an initial baseline, and add code along with patches for a particular functional area. [Marc Zyngier]
* In mshyperv.h, use static inline functions instead of #defines where possible. [Arnd Bergmann]
* Use VMbus INTID obtained from ACPI DSDT instead of hardcoding. The STIMER INTID is still hardcoded because it is needed before Linux has initialized the ACPI subsystem, so it can't be obtained from the DSDT. Wedging it into the GTDT seems dubious, so was not done. [Marc Zyngier]
* Update Hyper-V page size allocation functions to use alloc_page() if PAGE_SIZE == HV_HYP_PAGE_SIZE [Arnd Bergmann]
* Various other minor changes based on feedback and to rebase to latest linux-next [Marc Zyngier and Arnd Bergmann]
Changes in v6:
* Use SMCCC hypercall interface instead of direct invocation of HVC instruction and the Hyper-V hypercall interface [Marc Zyngier]
* Reimplemented functions to alloc/free Hyper-V size pages using kmalloc/kfree since kmalloc now guarantees alignment of power of 2 size allocations [Marc Zyngier]
* Export screen_info in arm64 architecture so it can be used by the Hyper-V buffer driver built as a module
* Renamed source file arch/arm64/hyperv/hv_init.c to hv_core.c to better reflect its content
* Fixed the bit position of certain feature flags presented by Hyper-V to the guest. The bit positions on ARM64 don't match the position on x86 like originally thought.
* Minor fixups to rebase to 5.6-rc5 linux-next
Changes in v5:
* Minor fixups to rebase to 5.4-rc1 linux-next
Changes in v4:
* Moved clock-related code into an architecture independent Hyper-V clocksource driver that is already upstream. Clock related code is removed from this patch set except for the ARM64 specific interrupt handler. [Marc Zyngier]
* Separately upstreamed the split of mshyperv.h into arch independent and arch dependent portions. The arch independent portion has been removed from this patch set.
* Divided patch #2 of the series into multiple smaller patches [Marc Zyngier]
* Changed a dozen or so smaller things based on feedback [Marc Zyngier, Will Deacon]
* Added functions to alloc/free Hyper-V size pages for use by drivers for Hyper-V synthetic devices when updated to not assume guest page size and Hyper-v page size are the same
Changes in v3:
* Added initialization of hv_vp_index array like was recently added on x86 branch [KY Srinivasan]
* Changed Hyper-V ARM64 register symbols to be all uppercase instead of mixed case [KY Srinivasan]
* Separated mshyperv.h into two files, one architecture independent and one architecture dependent. After this code is upstream, will make changes to the x86 code to use the architecture independent file and remove duplication. And once we have a multi-architecture Hyper-V TLFS, will do a separate patch to split hyperv-tlfs.h in the same way. [KY Srinivasan]
* Minor tweaks to rebase to latest linux-next code
Changes in v2:
* Removed patch to implement slow_virt_to_phys() on ARM64. Use of slow_virt_to_phys() in arch independent Hyper-V drivers has been eliminated by commit 6ba34171bcbd ("Drivers: hv: vmbus: Remove use of slow_virt_to_phys()")
* Minor tweaks to rebase to latest linux-next code
Michael Kelley (5):
arm64: hyperv: Add Hyper-V hypercall and register access utilities
arm64: hyperv: Add panic handler
arm64: hyperv: Initialize hypervisor on boot
arm64: efi: Export screen_info
Drivers: hv: Enable Hyper-V code to be built on ARM64
MAINTAINERS | 3 + arch/arm64/Kbuild | 1 + arch/arm64/hyperv/Makefile | 2 + arch/arm64/hyperv/hv_core.c | 181 +++++++++++++++++++++++++++++++++++ arch/arm64/hyperv/mshyperv.c | 83 ++++++++++++++++ arch/arm64/include/asm/hyperv-tlfs.h | 69 +++++++++++++ arch/arm64/include/asm/mshyperv.h | 54 +++++++++++ arch/arm64/kernel/efi.c | 1 + drivers/hv/Kconfig | 5 +- 9 files changed, 397 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/hyperv/Makefile create mode 100644 arch/arm64/hyperv/hv_core.c create mode 100644 arch/arm64/hyperv/mshyperv.c create mode 100644 arch/arm64/include/asm/hyperv-tlfs.h create mode 100644 arch/arm64/include/asm/mshyperv.h
Signature · 7 lines
1.8.3.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v11 1/5 arm64: hyperv: Add Hyper-V hypercall and register access utilities
hyperv-tlfs.h defines Hyper-V interfaces from the Hyper-V Top Level Functional Spec (TLFS), and #includes the architecture-independent part of hyperv-tlfs.h in include/asm-generic. The published TLFS is distinctly oriented to x86/x64, so the ARM64-specific hyperv-tlfs.h includes information for ARM64 that is not yet formally published. The TLFS is available here:
docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
mshyperv.h defines Linux-specific structures and routines for interacting with Hyper-V on ARM64, and #includes the architecture- independent part of mshyperv.h in include/asm-generic.
Use these definitions to provide utility functions to make Hyper-V hypercalls and to get and set Hyper-V provided registers associated with a virtual processor.
--- MAINTAINERS | 3 + arch/arm64/Kbuild | 1 + arch/arm64/hyperv/Makefile | 2 + arch/arm64/hyperv/hv_core.c | 129 +++++++++++++++++++++++++++++++++++ arch/arm64/include/asm/hyperv-tlfs.h | 69 +++++++++++++++++++ arch/arm64/include/asm/mshyperv.h | 54 +++++++++++++++ 6 files changed, 258 insertions(+) create mode 100644 arch/arm64/hyperv/Makefile create mode 100644 arch/arm64/hyperv/hv_core.c create mode 100644 arch/arm64/include/asm/hyperv-tlfs.h create mode 100644 arch/arm64/include/asm/mshyperv.h
MAINTAINERS +3 -0
@@ -8608,6 +8608,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git F: Documentation/ABI/stable/sysfs-bus-vmbus F: Documentation/ABI/testing/debugfs-hyperv F: Documentation/networking/device_drivers/ethernet/microsoft/netvsc.rst +F: arch/arm64/hyperv +F: arch/arm64/include/asm/hyperv-tlfs.h +F: arch/arm64/include/asm/mshyperv.h F: arch/x86/hyperv F: arch/x86/include/asm/hyperv-tlfs.h F: arch/x86/include/asm/mshyperv.h
arch/arm64/Kbuild +1 -0
@@ -2,4 +2,5 @@ obj-y += kernel/ mm/ net/ obj-$(CONFIG_KVM) += kvm/ obj-$(CONFIG_XEN) += xen/ +obj-$(subst m,y,$(CONFIG_HYPERV)) += hyperv/ obj-$(CONFIG_CRYPTO) += crypto/
arch/arm64/hyperv/Makefile new file +2 -0
@@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-y := hv_core.o
arch/arm64/hyperv/hv_core.c new file +129 -0
129 lines not on this page · raw message
arch/arm64/include/asm/hyperv-tlfs.h new file +69 -0
69 lines not on this page · raw message
arch/arm64/include/asm/mshyperv.h new file +54 -0
54 lines not on this page · raw message
Signature · 7 lines
1.8.3.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v11 2/5 arm64: hyperv: Add panic handler
In reply to Michael KelleyAdd a function to inform Hyper-V about a guest panic.
This code is built only when CONFIG_HYPERV is enabled.
--- arch/arm64/hyperv/hv_core.c | 52 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)
arch/arm64/hyperv/hv_core.c +52 -0
@@ -127,3 +127,55 @@ u64 hv_get_vpreg(u32 msr)return output.as64.low; }EXPORT_SYMBOL_GPL (hv_get_vpreg); + +/* +* hyperv_report_panic - report a panic to Hyper-V. This function uses +* the older version of the Hyper-V interface that admittedly doesn't +* pass enough information to be useful beyond just recording the +* occurrence of a panic. The parallel hv_kmsg_dump() uses the +* new interface that allows reporting 4 Kbytes of data, which is much +* more useful. Hyper-V on ARM64 always supports the newer interface, but +* we retain support for the older version because the sysadmin is allowed +* to disable the newer version via sysctl in case of information security +* concerns about the more verbose version. +*/ +void hyperv_report_panic (struct pt_regs *regs,long err,bool in_die) +{ +static bool panic_reported; +u64 guest_id; + +/* Don't report a panic to Hyper-V if we're not going to panic */ +if (in_die && !panic_on_oops) +return ; + +/* +* We prefer to report panic on 'die' chain as we have proper +* registers to report, but if we miss it (e.g. on BUG()) we need +* to report it on 'panic'. +* +* Calling code in the 'die' and 'panic' paths ensures that only +* one CPU is running this code, so no atomicity is needed. +*/ +if (panic_reported) +return ; + panic_reported = true; + + guest_id =hv_get_vpreg (HV_REGISTER_GUEST_OSID ); + +/* +* Hyper-V provides the ability to store only 5 values. +* Pick the passed in error value, the guest_id, the PC, +* and the SP. +*/ +hv_set_vpreg (HV_REGISTER_CRASH_P0 , err); +hv_set_vpreg (HV_REGISTER_CRASH_P1 , guest_id); +hv_set_vpreg (HV_REGISTER_CRASH_P2 , regs->pc); +hv_set_vpreg (HV_REGISTER_CRASH_P3 , regs->sp); +hv_set_vpreg (HV_REGISTER_CRASH_P4 ,0 ); + +/* +* Let Hyper-V know there is crash data available +*/ +hv_set_vpreg (HV_REGISTER_CRASH_CTL ,HV_CRASH_CTL_CRASH_NOTIFY ); +} +EXPORT_SYMBOL_GPL (hyperv_report_panic);
Signature · 7 lines
1.8.3.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v11 2/5] arm64: hyperv: Add panic handler
Quoted 5 lines · Michael Kelley
Add a function to inform Hyper-V about a guest panic.
This code is built only when
CONFIG_HYPERVis enabled.Signed-off-by Michael Kelley <[email protected]>
Regards,
Boqun
Quoted 67 lines
--- arch/arm64/hyperv/hv_core.c | 52 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)arch/arm64/hyperv/hv_core.c +52
-0@@ -127,3 +127,55 @@ u64 hv_get_vpreg(u32 msr)return output.as64.low; }EXPORT_SYMBOL_GPL (hv_get_vpreg); + +/* +* hyperv_report_panic - report a panic to Hyper-V. This function uses +* the older version of the Hyper-V interface that admittedly doesn't +* pass enough information to be useful beyond just recording the +* occurrence of a panic. The parallel hv_kmsg_dump() uses the +* new interface that allows reporting 4 Kbytes of data, which is much +* more useful. Hyper-V on ARM64 always supports the newer interface, but +* we retain support for the older version because the sysadmin is allowed +* to disable the newer version via sysctl in case of information security +* concerns about the more verbose version. +*/ +void hyperv_report_panic (struct pt_regs *regs,long err,bool in_die) +{ +static bool panic_reported; +u64 guest_id; + +/* Don't report a panic to Hyper-V if we're not going to panic */ +if (in_die && !panic_on_oops) +return ; + +/* +* We prefer to report panic on 'die' chain as we have proper +* registers to report, but if we miss it (e.g. on BUG()) we need +* to report it on 'panic'. +* +* Calling code in the 'die' and 'panic' paths ensures that only +* one CPU is running this code, so no atomicity is needed. +*/ +if (panic_reported) +return ; + panic_reported = true; + + guest_id =hv_get_vpreg (HV_REGISTER_GUEST_OSID ); + +/* +* Hyper-V provides the ability to store only 5 values. +* Pick the passed in error value, the guest_id, the PC, +* and the SP. +*/ +hv_set_vpreg (HV_REGISTER_CRASH_P0 , err); +hv_set_vpreg (HV_REGISTER_CRASH_P1 , guest_id); +hv_set_vpreg (HV_REGISTER_CRASH_P2 , regs->pc); +hv_set_vpreg (HV_REGISTER_CRASH_P3 , regs->sp); +hv_set_vpreg (HV_REGISTER_CRASH_P4 ,0 ); + +/* +* Let Hyper-V know there is crash data available +*/ +hv_set_vpreg (HV_REGISTER_CRASH_CTL ,HV_CRASH_CTL_CRASH_NOTIFY ); +} +EXPORT_SYMBOL_GPL (hyperv_report_panic);Signature · 1 line
1.8.3.1
RE: [PATCH v11 2/5] arm64: hyperv: Add panic handler
In reply to Michael KelleyQuoted 70 lines
Add a function to inform Hyper-V about a guest panic.
This code is built only when
CONFIG_HYPERVis enabled.Signed-off-by Michael Kelley <[email protected]>--- arch/arm64/hyperv/hv_core.c | 52 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)arch/arm64/hyperv/hv_core.c +52
-1@@ -127,3 +127,55 @@ u64 hv_get_vpreg(u32 msr)return output.as64.low; }EXPORT_SYMBOL_GPL (hv_get_vpreg); + +/* +* hyperv_report_panic - report a panic to Hyper-V. This function uses +* the older version of the Hyper-V interface that admittedly doesn't +* pass enough information to be useful beyond just recording the +* occurrence of a panic. The parallel hv_kmsg_dump() uses the +* new interface that allows reporting 4 Kbytes of data, which is much +* more useful. Hyper-V on ARM64 always supports the newer interface, but +* we retain support for the older version because the sysadmin is allowed +* to disable the newer version via sysctl in case of information security +* concerns about the more verbose version. +*/ +void hyperv_report_panic (struct pt_regs *regs,long err,bool in_die) +{ +static bool panic_reported; +u64 guest_id; + +/* Don't report a panic to Hyper-V if we're not going to panic */ +if (in_die && !panic_on_oops) +return ; + +/* +* We prefer to report panic on 'die' chain as we have proper +* registers to report, but if we miss it (e.g. on BUG()) we need +* to report it on 'panic'. +* +* Calling code in the 'die' and 'panic' paths ensures that only +* one CPU is running this code, so no atomicity is needed. +*/ +if (panic_reported) +return ; + panic_reported = true; + + guest_id =hv_get_vpreg (HV_REGISTER_GUEST_OSID ); + +/* +* Hyper-V provides the ability to store only 5 values. +* Pick the passed in error value, the guest_id, the PC, +* and the SP. +*/ +hv_set_vpreg (HV_REGISTER_CRASH_P0 , err); +hv_set_vpreg (HV_REGISTER_CRASH_P1 , guest_id); +hv_set_vpreg (HV_REGISTER_CRASH_P2 , regs->pc); +hv_set_vpreg (HV_REGISTER_CRASH_P3 , regs->sp); +hv_set_vpreg (HV_REGISTER_CRASH_P4 ,0 ); + +/* +* Let Hyper-V know there is crash data available +*/ +hv_set_vpreg (HV_REGISTER_CRASH_CTL ,HV_CRASH_CTL_CRASH_NOTIFY ); +} +EXPORT_SYMBOL_GPL (hyperv_report_panic); --
Quoted 1 line
1.8.3.1
PATCH v11 3/5 arm64: hyperv: Initialize hypervisor on boot
In reply to Michael KelleyAdd ARM64-specific code to initialize the Hyper-V
hypervisor when booting as a guest VM.
This code is built only when CONFIG_HYPERV is enabled.
--- arch/arm64/hyperv/Makefile | 2 +- arch/arm64/hyperv/mshyperv.c | 83 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/hyperv/mshyperv.c
arch/arm64/hyperv/Makefile +1 -1
@@ -1,2 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 -obj-y := hv_core.o +obj-y := hv_core.o mshyperv.o
arch/arm64/hyperv/mshyperv.c new file +83 -0
83 lines not on this page · raw message
Signature · 7 lines
1.8.3.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v11 3/5] arm64: hyperv: Initialize hypervisor on boot
Quoted 6 lines · Michael Kelley
Add ARM64-specific code to initialize the Hyper-V
hypervisor when booting as a guest VM.This code is built only when
CONFIG_HYPERVis enabled.Signed-off-by Michael Kelley <[email protected]>
FWIW,
Regards,
Boqun
Quoted 106 lines
--- arch/arm64/hyperv/Makefile | 2 +- arch/arm64/hyperv/mshyperv.c | 83 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/hyperv/mshyperv.carch/arm64/hyperv/Makefile +1
-1@@ -1,2 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 -obj-y := hv_core.o +obj-y := hv_core.o mshyperv.oarch/arm64/hyperv/mshyperv.c new file +83
-0@@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* +* Core routines for interacting with Microsoft's Hyper-V hypervisor, +* including hypervisor initialization. +* +* Copyright (C) 2021, Microsoft, Inc. +* +* Author : Michael Kelley <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/acpi.h> +#include <linux/export.h> +#include <linux/errno.h> +#include <linux/version.h> +#include <linux/cpuhotplug.h> +#include <asm/mshyperv.h> + +static bool hyperv_initialized; + +static int __init hyperv_init (void ) +{ +struct hv_get_vp_registers_output result; +u32 a, b, c, d; +u64 guest_id; +int ret; + +/* +* If we're in a VM on Hyper-V, the ACPI hypervisor_id field will +* have the string "MsHyperV". +*/ +if (strncmp ((char *)&acpi_gbl_FADT.hypervisor_id,"MsHyperV" ,8 )) +return -EINVAL ; + +/* Setup the guest ID */ + guest_id =generate_guest_id (0 ,LINUX_VERSION_CODE ,0 ); +hv_set_vpreg (HV_REGISTER_GUEST_OSID , guest_id); + +/* Get the features and hints from Hyper-V */ +hv_get_vpreg_128 (HV_REGISTER_FEATURES , &result); + ms_hyperv.features = result.as32.a; + ms_hyperv.priv_high = result.as32.b; + ms_hyperv.misc_features = result.as32.c; + +hv_get_vpreg_128 (HV_REGISTER_ENLIGHTENMENTS , &result); + ms_hyperv.hints = result.as32.a; + +pr_info ("Hyper-V: privilege flags low 0x%x, high 0x%x, hints 0x%x, misc 0x%x\n" , + ms_hyperv.features, ms_hyperv.priv_high, ms_hyperv.hints, + ms_hyperv.misc_features); + +/* Get information about the Hyper-V host version */ +hv_get_vpreg_128 (HV_REGISTER_HYPERVISOR_VERSION , &result); + a = result.as32.a; + b = result.as32.b; + c = result.as32.c; + d = result.as32.d; +pr_info ("Hyper-V: Host Build %d.%d.%d.%d-%d-%d\n" , + b >>16 , b &0xFFFF , a, d &0xFFFFFF , c, d >>24 ); + + ret =hv_common_init (); +if (ret) +return ret; + + ret =cpuhp_setup_state (CPUHP_AP_ONLINE_DYN ,"arm64/hyperv_init:online" , + hv_common_cpu_init, hv_common_cpu_die); +if (ret <0 ) { +hv_common_free (); +return ret; + } + + hyperv_initialized = true; +return 0 ; +} + +early_initcall (hyperv_init); + +bool hv_is_hyperv_initialized (void ) +{ +return hyperv_initialized; +} +EXPORT_SYMBOL_GPL (hv_is_hyperv_initialized);Signature · 1 line
1.8.3.1
RE: [PATCH v11 3/5] arm64: hyperv: Initialize hypervisor on boot
In reply to Michael KelleyQuoted 112 lines
Subject: [PATCH v11 3/5] arm64: hyperv: Initialize hypervisor on boot
Add ARM64-specific code to initialize the Hyper-V
hypervisor when booting as a guest VM.This code is built only when
CONFIG_HYPERVis enabled.Signed-off-by Michael Kelley <[email protected]>--- arch/arm64/hyperv/Makefile | 2 +- arch/arm64/hyperv/mshyperv.c | 83 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/hyperv/mshyperv.carch/arm64/hyperv/Makefile +1
-1@@ -1,2 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 -obj-y := hv_core.o +obj-y := hv_core.o mshyperv.oarch/arm64/hyperv/mshyperv.c new file +83
-1@@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* +* Core routines for interacting with Microsoft's Hyper-V hypervisor, +* including hypervisor initialization. +* +* Copyright (C) 2021, Microsoft, Inc. +* +* Author : Michael Kelley <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/acpi.h> +#include <linux/export.h> +#include <linux/errno.h> +#include <linux/version.h> +#include <linux/cpuhotplug.h> +#include <asm/mshyperv.h> + +static bool hyperv_initialized; + +static int __init hyperv_init (void ) +{ +struct hv_get_vp_registers_output result; +u32 a, b, c, d; +u64 guest_id; +int ret; + +/* +* If we're in a VM on Hyper-V, the ACPI hypervisor_id field will +* have the string "MsHyperV". +*/ +if (strncmp ((char *)&acpi_gbl_FADT.hypervisor_id,"MsHyperV" ,8 )) +return -EINVAL ; + +/* Setup the guest ID */ + guest_id =generate_guest_id (0 ,LINUX_VERSION_CODE ,0 ); +hv_set_vpreg (HV_REGISTER_GUEST_OSID , guest_id); + +/* Get the features and hints from Hyper-V */ +hv_get_vpreg_128 (HV_REGISTER_FEATURES , &result); + ms_hyperv.features = result.as32.a; + ms_hyperv.priv_high = result.as32.b; + ms_hyperv.misc_features = result.as32.c; + +hv_get_vpreg_128 (HV_REGISTER_ENLIGHTENMENTS , &result); + ms_hyperv.hints = result.as32.a; + +pr_info ("Hyper-V: privilege flags low 0x%x, high 0x%x, hints 0x%x, misc 0x%x\n" , + ms_hyperv.features, ms_hyperv.priv_high, ms_hyperv.hints, + ms_hyperv.misc_features); + +/* Get information about the Hyper-V host version */ +hv_get_vpreg_128 (HV_REGISTER_HYPERVISOR_VERSION , &result); + a = result.as32.a; + b = result.as32.b; + c = result.as32.c; + d = result.as32.d; +pr_info ("Hyper-V: Host Build %d.%d.%d.%d-%d-%d\n" , + b >>16 , b &0xFFFF , a, d &0xFFFFFF , c, d >>24 ); + + ret =hv_common_init (); +if (ret) +return ret; + + ret =cpuhp_setup_state (CPUHP_AP_ONLINE_DYN ,"arm64/hyperv_init:online" , + hv_common_cpu_init, hv_common_cpu_die); +if (ret <0 ) { +hv_common_free (); +return ret; + } + + hyperv_initialized = true; +return 0 ; +} + +early_initcall (hyperv_init); + +bool hv_is_hyperv_initialized (void ) +{ +return hyperv_initialized; +} +EXPORT_SYMBOL_GPL (hv_is_hyperv_initialized); --
Quoted 1 line
1.8.3.1
Re: [PATCH v11 3/5] arm64: hyperv: Initialize hypervisor on boot
In reply to Michael KelleyQuoted 51 lines · Michael Kelley
Add ARM64-specific code to initialize the Hyper-V
hypervisor when booting as a guest VM.This code is built only when
CONFIG_HYPERVis enabled.Signed-off-by Michael Kelley <[email protected]>--- arch/arm64/hyperv/Makefile | 2 +- arch/arm64/hyperv/mshyperv.c | 83 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/hyperv/mshyperv.carch/arm64/hyperv/Makefile +1
-1@@ -1,2 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 -obj-y := hv_core.o +obj-y := hv_core.o mshyperv.oarch/arm64/hyperv/mshyperv.c new file +24
-0@@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* +* Core routines for interacting with Microsoft's Hyper-V hypervisor, +* including hypervisor initialization. +* +* Copyright (C) 2021, Microsoft, Inc. +* +* Author : Michael Kelley <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/acpi.h> +#include <linux/export.h> +#include <linux/errno.h> +#include <linux/version.h> +#include <linux/cpuhotplug.h> +#include <asm/mshyperv.h> + +static bool hyperv_initialized; + +static int __init hyperv_init (void ) +{ +struct hv_get_vp_registers_output result;
arch/arm64/hyperv/mshyperv.c line 34
Quoted 10 lines
arch/arm64/hyperv/mshyperv.c new file +10
-0+u32 a, b, c, d; +u64 guest_id; +int ret; + +/* +* If we're in a VM on Hyper-V, the ACPI hypervisor_id field will +* have the string "MsHyperV". +*/ +if (strncmp ((char *)&acpi_gbl_FADT.hypervisor_id,"MsHyperV" ,8 )) +return -EINVAL ;
Before going ahead and parsing the local FADT copy, it would be prudent to test that you are actually on an ACPI system, specially given that this function is unconditionally called, even on DT systems. In the same vein, returning -EINVAL when failing to find Hyper-V is a bit excessive.
Quoted 39 lines
arch/arm64/hyperv/mshyperv.c new file +39
-0+ +/* Setup the guest ID */ + guest_id =generate_guest_id (0 ,LINUX_VERSION_CODE ,0 ); +hv_set_vpreg (HV_REGISTER_GUEST_OSID , guest_id); + +/* Get the features and hints from Hyper-V */ +hv_get_vpreg_128 (HV_REGISTER_FEATURES , &result); + ms_hyperv.features = result.as32.a; + ms_hyperv.priv_high = result.as32.b; + ms_hyperv.misc_features = result.as32.c; + +hv_get_vpreg_128 (HV_REGISTER_ENLIGHTENMENTS , &result); + ms_hyperv.hints = result.as32.a; + +pr_info ("Hyper-V: privilege flags low 0x%x, high 0x%x, hints 0x%x, misc 0x%x\n" , + ms_hyperv.features, ms_hyperv.priv_high, ms_hyperv.hints, + ms_hyperv.misc_features); + +/* Get information about the Hyper-V host version */ +hv_get_vpreg_128 (HV_REGISTER_HYPERVISOR_VERSION , &result); + a = result.as32.a; + b = result.as32.b; + c = result.as32.c; + d = result.as32.d; +pr_info ("Hyper-V: Host Build %d.%d.%d.%d-%d-%d\n" , + b >>16 , b &0xFFFF , a, d &0xFFFFFF , c, d >>24 ); + + ret =hv_common_init (); +if (ret) +return ret; + + ret =cpuhp_setup_state (CPUHP_AP_ONLINE_DYN ,"arm64/hyperv_init:online" , + hv_common_cpu_init, hv_common_cpu_die); +if (ret <0 ) { +hv_common_free (); +return ret; + } + + hyperv_initialized = true;
arch/arm64/hyperv/mshyperv.c line 83
Quoted 10 lines
arch/arm64/hyperv/mshyperv.c new file +10
-0+return 0 ; +} + +early_initcall (hyperv_init); + +bool hv_is_hyperv_initialized (void ) +{ +return hyperv_initialized; +} +EXPORT_SYMBOL_GPL (hv_is_hyperv_initialized);
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Mark Rutland
reviewerRe: [PATCH v11 3/5] arm64: hyperv: Initialize hypervisor on boot
In reply to Michael KelleyQuoted 43 lines · Michael Kelley
Add ARM64-specific code to initialize the Hyper-V
hypervisor when booting as a guest VM.This code is built only when
CONFIG_HYPERVis enabled.Signed-off-by Michael Kelley <[email protected]>--- arch/arm64/hyperv/Makefile | 2 +- arch/arm64/hyperv/mshyperv.c | 83 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/hyperv/mshyperv.carch/arm64/hyperv/Makefile +1
-1@@ -1,2 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 -obj-y := hv_core.o +obj-y := hv_core.o mshyperv.oarch/arm64/hyperv/mshyperv.c new file +17
-0@@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* +* Core routines for interacting with Microsoft's Hyper-V hypervisor, +* including hypervisor initialization. +* +* Copyright (C) 2021, Microsoft, Inc. +* +* Author : Michael Kelley <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/acpi.h> +#include <linux/export.h> +#include <linux/errno.h> +#include <linux/version.h> +#include <linux/cpuhotplug.h>
arch/arm64/hyperv/mshyperv.c line 27
Quoted 10 lines
arch/arm64/hyperv/mshyperv.c new file +10
-0+#include <asm/mshyperv.h> + +static bool hyperv_initialized; + +static int __init hyperv_init (void ) +{ +struct hv_get_vp_registers_output result; +u32 a, b, c, d; +u64 guest_id; +int ret;
As Marc suggests, before looking at the FADT, you need something like:
/* * Hyper-V VMs always have ACPI. */ if (acpi_disabled) return 0;
... where acpi_disabled is defined in <linux/acpi.h> (or via its includes), so you don't need to include any additional headers.
arch/arm64/hyperv/mshyperv.c line 34
Quoted 7 lines
arch/arm64/hyperv/mshyperv.c new file +7
-0+ +/* +* If we're in a VM on Hyper-V, the ACPI hypervisor_id field will +* have the string "MsHyperV". +*/ +if (strncmp ((char *)&acpi_gbl_FADT.hypervisor_id,"MsHyperV" ,8 )) +return -EINVAL ;
As Marc suggests, it's no an error for a platform to not have Hyper-V, so returning 0 in tihs case would be preferable.
Otherwise this looks fine to me.
Thanks,
Mark.
Quoted 52 lines
arch/arm64/hyperv/mshyperv.c new file +49
-0+ +/* Setup the guest I[D */ + guest_id =generate_guest_id (0 ,LINUX_VERSION_CODE ,0 ); +hv_set_vpreg (HV_REGISTER_GUEST_OSID , guest_id); + +/* Get the features and hints from Hyper-V */ +hv_get_vpreg_128 (HV_REGISTER_FEATURES , &result); + ms_hyperv.features = result.as32.a; + ms_hyperv.priv_high = result.as32.b; + ms_hyperv.misc_features = result.as32.c; + +hv_get_vpreg_128 (HV_REGISTER_ENLIGHTENMENTS , &result); + ms_hyperv.hints = result.as32.a; + +pr_info ("Hyper-V: privilege flags low 0x%x, high 0x%x, hints 0x%x, misc 0x%x\n" , + ms_hyperv.features, ms_hyperv.priv_high, ms_hyperv.hints, + ms_hyperv.misc_features); + +/* Get information about the Hyper-V host version */ +hv_get_vpreg_128 (HV_REGISTER_HYPERVISOR_VERSION , &result); + a = result.as32.a; + b = result.as32.b; + c = result.as32.c; + d = result.as32.d; +pr_info ("Hyper-V: Host Build %d.%d.%d.%d-%d-%d\n" , + b >>16 , b &0xFFFF , a, d &0xFFFFFF , c, d >>24 ); + + ret =hv_common_init (); +if (ret) +return ret; + + ret =cpuhp_setup_state (CPUHP_AP_ONLINE_DYN ,"arm64/hyperv_init:online" , + hv_common_cpu_init, hv_common_cpu_die); +if (ret <0 ) { +hv_common_free (); +return ret; + } + + hyperv_initialized = true; +return 0 ; +} + +early_initcall (hyperv_init); + +bool hv_is_hyperv_initialized (void ) +{ +return hyperv_initialized; +} +EXPORT_SYMBOL_GPL (hv_is_hyperv_initialized);Signature · 1 line
1.8.3.1
RE: [PATCH v11 3/5] arm64: hyperv: Initialize hypervisor on boot
From: Mark Rutland <[email protected]> Sent: Monday, August 2, 2021 9:26 AM
Quoted 78 lines · Michael Kelley
Quoted 43 lines
Add ARM64-specific code to initialize the Hyper-V
hypervisor when booting as a guest VM.This code is built only when
CONFIG_HYPERVis enabled.Signed-off-by Michael Kelley <[email protected]>--- arch/arm64/hyperv/Makefile | 2 +- arch/arm64/hyperv/mshyperv.c | 83 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/hyperv/mshyperv.carch/arm64/hyperv/Makefile +1
-1@@ -1,2 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 -obj-y := hv_core.o +obj-y := hv_core.o mshyperv.oarch/arm64/hyperv/mshyperv.c new file +17
-0@@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* +* Core routines for interacting with Microsoft's Hyper-V hypervisor, +* including hypervisor initialization. +* +* Copyright (C) 2021, Microsoft, Inc. +* +* Author : Michael Kelley <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/acpi.h> +#include <linux/export.h> +#include <linux/errno.h> +#include <linux/version.h> +#include <linux/cpuhotplug.h> arch/arm64/hyperv/mshyperv.c line 27
Quoted 10 lines
arch/arm64/hyperv/mshyperv.c new file +10
-0+#include <asm/mshyperv.h> + +static bool hyperv_initialized; + +static int __init hyperv_init (void ) +{ +struct hv_get_vp_registers_output result; +u32 a, b, c, d; +u64 guest_id; +int ret;As Marc suggests, before looking at the FADT, you need something like:
/* * Hyper-V VMs always have ACPI. */ if (acpi_disabled) return 0;... where
acpi_disabledis defined in <linux/acpi.h> (or via its includes), so you don't need to include any additional headers.arch/arm64/hyperv/mshyperv.c line 34
Quoted 7 lines
arch/arm64/hyperv/mshyperv.c new file +7
-0+ +/* +* If we're in a VM on Hyper-V, the ACPI hypervisor_id field will +* have the string "MsHyperV". +*/ +if (strncmp ((char *)&acpi_gbl_FADT.hypervisor_id,"MsHyperV" ,8 )) +return -EINVAL ;As Marc suggests, it's no an error for a platform to not have Hyper-V, so returning 0 in tihs case would be preferable.
Quoted 2 lines
Otherwise this looks fine to me.
Thanks Marc and Mark. Good point that the code should cleanly handle the case where a kernel is built with CONFIG_HYPERV but running somewhere other than as a Hyper-V guest.
Michael
PATCH v11 4/5 arm64: efi: Export screen_info
In reply to Michael KelleyThe Hyper-V frame buffer driver may be built as a module, and it needs access to screen_info. So export screen_info.
--- arch/arm64/kernel/efi.c | 1 + 1 file changed, 1 insertion(+)
arch/arm64/kernel/efi.c +1 -0
@@ -55,6 +55,7 @@ static __init pteval_t create_mapping_protection(efi_memory_desc_t *md)/* we will fill this structure from the stub, so don't put it in .bss */ struct screen_info screen_info __section(".data"); +EXPORT_SYMBOL (screen_info);int __init efi_create_mapping (struct mm_struct *mm,efi_memory_desc_t *md) {
Signature · 7 lines
1.8.3.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v11 5/5 Drivers: hv: Enable Hyper-V code to be built on ARM64
In reply to Michael KelleyUpdate drivers/hv/Kconfig so CONFIG_HYPERV can be selected on ARM64, causing the Hyper-V specific code to be built. Exclude the Hyper-V enlightened clocks/timers code from being built for ARM64.
--- drivers/hv/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/hv/Kconfig +3 -2
@@ -4,7 +4,8 @@ menu "Microsoft Hyper-V guest support" config HYPERV tristate "Microsoft Hyper-V client drivers" - depends on X86 && ACPI && X86_LOCAL_APIC && HYPERVISOR_GUEST + depends on ACPI && ((X86 && X86_LOCAL_APIC && HYPERVISOR_GUEST) \ + || (ARM64 && !CPU_BIG_ENDIAN)) select PARAVIRT select X86_HV_CALLBACK_VECTOR help
@@ -12,7 +13,7 @@ config HYPERV system. config HYPERV_TIMER - def_bool HYPERV + def_bool HYPERV && X86 config HYPERV_UTILS tristate "Microsoft Hyper-V Utilities driver"
Signature · 7 lines
1.8.3.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v11 5/5] Drivers: hv: Enable Hyper-V code to be built on ARM64
Quoted 5 lines · Michael Kelley
Update
drivers/hv/KconfigsoCONFIG_HYPERVcan be selected on ARM64, causing the Hyper-V specific code to be built. Exclude the Hyper-V enlightened clocks/timers code from being built for ARM64.Signed-off-by Michael Kelley <[email protected]>
FWIW,
Regards,
Boqun
Quoted 30 lines
--- drivers/hv/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)drivers/hv/Kconfig +3
-2@@ -4,7 +4,8 @@ menu "Microsoft Hyper-V guest support" config HYPERV tristate "Microsoft Hyper-V client drivers" - depends on X86 && ACPI && X86_LOCAL_APIC && HYPERVISOR_GUEST + depends on ACPI && ((X86 && X86_LOCAL_APIC && HYPERVISOR_GUEST) \ + || (ARM64 && !CPU_BIG_ENDIAN)) select PARAVIRT select X86_HV_CALLBACK_VECTOR help@@ -12,7 +13,7 @@ config HYPERV system. config HYPERV_TIMER - def_bool HYPERV + def_bool HYPERV && X86 config HYPERV_UTILS tristate "Microsoft Hyper-V Utilities driver"Signature · 1 line
1.8.3.1
From: Michael Kelley <[email protected]> Sent: Tuesday, July 20, 2021 7:57 AM
Quoted 7 lines
This series enables Linux guests running on Hyper-V on ARM64 hardware. New ARM64-specific code in
arch/arm64/hypervinitializes Hyper-V and its hypercall mechanism. Existing architecture independent drivers for Hyper-V's VMbus and synthetic devices just work when built for ARM64. Hyper-V code is built and included in the image and modules only ifCONFIG_HYPERVis enabled.
Will and Catalin --
Gentle ping. :-) The clock/timer issues are now worked out in that
Hyper-V is providing full Generic Timer functionality in guest VMs. That dropped some code out of the patch set, and making additional code architecture neutral reduced the ARM64 specific code in this patch set even further.
To my knowledge, all issues have been addressed, so I'm looking for any further review from you as ARM64 maintainers, or your Ack so this can be ready for the 5.15 merge window.
Thanks!
Michael
Quoted 183 lines
The five patches are organized as follows:
1) Add definitions and functions for making Hyper-V hypercalls and getting/setting virtual processor registers provided by Hyper-V
2) Add the function needed by the arch independent VMbus driver for reporting a panic to Hyper-V.
3) Add Hyper-V initialization code and utility functions that report Hyper-v status.
4) Export
screen_infoso it may be used by the Hyper-V frame buffer driver built as a module. It is already exported for x86, powerpc, and alpha architectures.5) Make
CONFIG_HYPERVselectable on ARM64 in addition to x86/x64.Hyper-V on ARM64 runs with a 4 Kbyte page size, but allows guests with 4K/16K/64K page size. Linux guests with this patch series work with all three supported ARM64 page sizes.
The Hyper-V vPCI driver at
drivers/pci/host/pci-hyperv.chas x86/x64-specific code and is not being built for ARM64. Enabling Hyper-V vPCI devices on ARM64 is in progress via a separate set of patches.This patch set is based on the linux-next20210720 code tree.
Changes in v11:
* Drop the previous Patch 1 as the fixes have already been separately accepted upstream.
* Drop the previous Patch 3 for enabling Hyper-V enlightened clocks/timers. Hyper-V is now offering the full ARM64 architectural Generic Timer in guest VMs, so the existingarch_arch_timer.cdriver just works. [Mark Rutland, Marc Zyngier]
* Simplified the previous Patch 4 and Patch 5 (now Patch 2 and 3) by sharing more code between the x86 and ARM64 architectures.
* Combinedhyperv_early_init()andhyperv_init()into a single initialization function that runs as anearly_initcall. This is possible because the Hyper-V enlightened clocks/timers no longer need to be initialized early in the boot sequence.Changes in v10:
* Drop previous Patch 1 for SMCCC v1.2 HVC calls in favor of Sudeep Holla's patch [Mark Rutland]
* Use new helper functions in 5.13 for checking Hyper-V hypercall return status
* Set up per-CPU hypercall argument page that is now used by the Hyper-V balloon driver
* Rebase on 5.13-RC1Changes in v9:
* Added Patch 1 to enable making an SMCCC compliant hypercall that returns results in other than registers X0 thru X3, per version 1.2 and later of the SMCCC spec.
* Using the ability to return results in registers X6 and X7, convertedhv_get_vpreg_128()to use a "fast" hypercall that passes inputs and outputs in registers, and in doing so eliminated a lot of memory allocation complexity.
* Cleaned up some extra blank lines and use of spaces in aligning local variables. [Sunil Muthuswamy]
* Based on discussion about future directions, reverted the population ofhv_vp_indexarray to use a cpuhp state instead of a hypercall, which is like it was in v7 and earlier.Changes in v8:
* Removed a lot of code based on refactoring the boundary between arch independent and arch dependent code for Hyper-V, per comments from Arnd Bergmann. The removed code was either duplicated on the x86 side, or has been folded into architecture independent code as not really being architecture dependent.
* Added config dependency on !CONFIG_CPU_BIG_ENDIAN [Arnd Bergmann]
* Reworked the approach to Hyper-V initialization. The functionality is the same, but is now structured like the Xen code with an early init function called insetup_arch()and an early initcall to finish the initialization. [Arnd Bergmann]Changes in v7:
* Separately upstreamed split ofhyperv-tlfs.hinto arch dependent and independent versions. In this patch set, update the ARM64hyperv-tlfs.hto include architecture independent definitions. This approach eliminates a lot of lines of otherwise duplicated code on the ARM64 side.
* Break ARM64mshyperv.hinto smaller pieces. Have an initial baseline, and add code along with patches for a particular functional area. [Marc Zyngier]
* Inmshyperv.h, use static inline functions instead of #defines where possible. [Arnd Bergmann]
* Use VMbus INTID obtained from ACPI DSDT instead of hardcoding. The STIMER INTID is still hardcoded because it is needed before Linux has initialized the ACPI subsystem, so it can't be obtained from the DSDT. Wedging it into the GTDT seems dubious, so was not done. [Marc Zyngier]
* Update Hyper-V page size allocation functions to usealloc_page()ifPAGE_SIZE==HV_HYP_PAGE_SIZE[Arnd Bergmann]
* Various other minor changes based on feedback and to rebase to latest linux-next [Marc Zyngier and Arnd Bergmann]Changes in v6:
* Use SMCCC hypercall interface instead of direct invocation of HVC instruction and the Hyper-V hypercall interface [Marc Zyngier]
* Reimplemented functions to alloc/free Hyper-V size pages using kmalloc/kfree since kmalloc now guarantees alignment of power of 2 size allocations [Marc Zyngier]
* Exportscreen_infoin arm64 architecture so it can be used by the Hyper-V buffer driver built as a module
* Renamed source filearch/arm64/hyperv/hv_init.ctohv_core.cto better reflect its content
* Fixed the bit position of certain feature flags presented by Hyper-V to the guest. The bit positions on ARM64 don't match the position on x86 like originally thought.
* Minor fixups to rebase to 5.6-rc5 linux-nextChanges in v5:
* Minor fixups to rebase to 5.4-rc1 linux-nextChanges in v4:
* Moved clock-related code into an architecture independent Hyper-V clocksource driver that is already upstream. Clock related code is removed from this patch set except for the ARM64 specific interrupt handler. [Marc Zyngier]
* Separately upstreamed the split ofmshyperv.hinto arch independent and arch dependent portions. The arch independent portion has been removed from this patch set.
* Divided patch #2 of the series into multiple smaller patches [Marc Zyngier]
* Changed a dozen or so smaller things based on feedback [Marc Zyngier, Will Deacon]
* Added functions to alloc/free Hyper-V size pages for use by drivers for Hyper-V synthetic devices when updated to not assume guest page size and Hyper-v page size are the sameChanges in v3:
* Added initialization ofhv_vp_indexarray like was recently added on x86 branch [KY Srinivasan]
* Changed Hyper-V ARM64 register symbols to be all uppercase instead of mixed case [KY Srinivasan]
* Separatedmshyperv.hinto two files, one architecture independent and one architecture dependent. After this code is upstream, will make changes to the x86 code to use the architecture independent file and remove duplication. And once we have a multi-architecture Hyper-V TLFS, will do a separate patch to splithyperv-tlfs.hin the same way. [KY Srinivasan]
* Minor tweaks to rebase to latest linux-next codeChanges in v2:
* Removed patch to implementslow_virt_to_phys()on ARM64. Use ofslow_virt_to_phys()in arch independent Hyper-V drivers has been eliminated by commit6ba34171bcbd("Drivers: hv: vmbus: Remove use ofslow_virt_to_phys()")
* Minor tweaks to rebase to latest linux-next codeMichael Kelley (5):
arm64: hyperv: Add Hyper-V hypercall and register access utilities
arm64: hyperv: Add panic handler
arm64: hyperv: Initialize hypervisor on boot
arm64: efi: Exportscreen_info
Drivers: hv: Enable Hyper-V code to be built on ARM64MAINTAINERS | 3 + arch/arm64/Kbuild | 1 + arch/arm64/hyperv/Makefile | 2 + arch/arm64/hyperv/hv_core.c | 181 +++++++++++++++++++++++++++++++++++ arch/arm64/hyperv/mshyperv.c | 83 ++++++++++++++++ arch/arm64/include/asm/hyperv-tlfs.h | 69 +++++++++++++ arch/arm64/include/asm/mshyperv.h | 54 +++++++++++ arch/arm64/kernel/efi.c | 1 + drivers/hv/Kconfig | 5 +- 9 files changed, 397 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/hyperv/Makefile create mode 100644 arch/arm64/hyperv/hv_core.c create mode 100644 arch/arm64/hyperv/mshyperv.c create mode 100644 arch/arm64/include/asm/hyperv-tlfs.h create mode 100644 arch/arm64/include/asm/mshyperv.h--
1.8.3.1
Quoted 37 lines · Michael Kelley
This series enables Linux guests running on Hyper-V on ARM64 hardware. New ARM64-specific code in
arch/arm64/hypervinitializes Hyper-V and its hypercall mechanism. Existing architecture independent drivers for Hyper-V's VMbus and synthetic devices just work when built for ARM64. Hyper-V code is built and included in the image and modules only ifCONFIG_HYPERVis enabled.The five patches are organized as follows:
1) Add definitions and functions for making Hyper-V hypercalls and getting/setting virtual processor registers provided by Hyper-V
2) Add the function needed by the arch independent VMbus driver for reporting a panic to Hyper-V.
3) Add Hyper-V initialization code and utility functions that report Hyper-v status.
4) Export
screen_infoso it may be used by the Hyper-V frame buffer driver built as a module. It is already exported for x86, powerpc, and alpha architectures.5) Make
CONFIG_HYPERVselectable on ARM64 in addition to x86/x64.Hyper-V on ARM64 runs with a 4 Kbyte page size, but allows guests with 4K/16K/64K page size. Linux guests with this patch series work with all three supported ARM64 page sizes.
The Hyper-V vPCI driver at
drivers/pci/host/pci-hyperv.chas x86/x64-specific code and is not being built for ARM64. Enabling Hyper-V vPCI devices on ARM64 is in progress via a separate set of patches.This patch set is based on the linux-next20210720 code tree.
Quoted 8 lines
Changes in v11:
* Drop the previous Patch 1 as the fixes have already been separately accepted upstream.
* Drop the previous Patch 3 for enabling Hyper-V enlightened clocks/timers. Hyper-V is now offering the full ARM64 architectural Generic Timer in guest VMs, so the existingarch_arch_timer.cdriver just works. [Mark Rutland, Marc Zyngier]
Thanks for doing this. Assuming you fix the issue I mentioned in my reply to patch #3. FWIW:
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Quoted 48 lines · Marc Zyngier
Quoted 37 lines · Michael Kelley
This series enables Linux guests running on Hyper-V on ARM64 hardware. New ARM64-specific code in
arch/arm64/hypervinitializes Hyper-V and its hypercall mechanism. Existing architecture independent drivers for Hyper-V's VMbus and synthetic devices just work when built for ARM64. Hyper-V code is built and included in the image and modules only ifCONFIG_HYPERVis enabled.The five patches are organized as follows:
1) Add definitions and functions for making Hyper-V hypercalls and getting/setting virtual processor registers provided by Hyper-V
2) Add the function needed by the arch independent VMbus driver for reporting a panic to Hyper-V.
3) Add Hyper-V initialization code and utility functions that report Hyper-v status.
4) Export
screen_infoso it may be used by the Hyper-V frame buffer driver built as a module. It is already exported for x86, powerpc, and alpha architectures.5) Make
CONFIG_HYPERVselectable on ARM64 in addition to x86/x64.Hyper-V on ARM64 runs with a 4 Kbyte page size, but allows guests with 4K/16K/64K page size. Linux guests with this patch series work with all three supported ARM64 page sizes.
The Hyper-V vPCI driver at
drivers/pci/host/pci-hyperv.chas x86/x64-specific code and is not being built for ARM64. Enabling Hyper-V vPCI devices on ARM64 is in progress via a separate set of patches.This patch set is based on the linux-next20210720 code tree.
Quoted 8 lines
Changes in v11:
* Drop the previous Patch 1 as the fixes have already been separately accepted upstream.
* Drop the previous Patch 3 for enabling Hyper-V enlightened clocks/timers. Hyper-V is now offering the full ARM64 architectural Generic Timer in guest VMs, so the existingarch_arch_timer.cdriver just works. [Mark Rutland, Marc Zyngier]
Quoted 4 lines
Thanks for doing this. Assuming you fix the issue I mentioned in my reply to patch #3. FWIW:
Acked-by Marc Zyngier <[email protected]>
I've tried to provide concrete options for those. With those fixed up somehow:
Mark.