configs/stm32mp157c_odyssey: new defconfig
v3 cover configs/stm32mp157c_odyssey: new defconfig
From: Simon Doppler <[email protected]>
Hi Yann, Hi all,
Thanks for your feedback on v2.
Now that upstream has fixed the SDMMC CD pin, I backported the patch as you suggested.
This is the only change since v2.
Regards
Simon Doppler
Simon Doppler (1):
configs/stm32mp157c_odyssey: new defconfig
DEVELOPERS | 4 + board/seeed/stm32mp157c-odyssey/genimage.cfg | 22 +++ board/seeed/stm32mp157c-odyssey/linux.config | 182 ++++++++++++++++++ .../overlay/boot/extlinux/extlinux.conf | 4 + ...-fix-stm32mp157c-odyssey-card-detect.patch | 36 ++++ configs/stm32mp157c_odyssey_defconfig | 31 +++ 6 files changed, 279 insertions(+) create mode 100644 board/seeed/stm32mp157c-odyssey/genimage.cfg create mode 100644 board/seeed/stm32mp157c-odyssey/linux.config create mode 100644 board/seeed/stm32mp157c-odyssey/overlay/boot/extlinux/extlinux.conf create mode 100644 board/seeed/stm32mp157c-odyssey/patches/linux/5.10.1/0001-ARM-dts-stm32-fix-stm32mp157c-odyssey-card-detect.patch create mode 100644 configs/stm32mp157c_odyssey_defconfig
--
2.30.2
_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot
PATCH v3 1/1 configs/stm32mp157c_odyssey: new defconfig
From: Simon Doppler <[email protected]>
STM32MP157C-Odyssey reference:
https://wiki.seeedstudio.com/ODYSSEY-STM32MP157C/
--- DEVELOPERS | 4 + board/seeed/stm32mp157c-odyssey/genimage.cfg | 22 +++ board/seeed/stm32mp157c-odyssey/linux.config | 182 ++++++++++++++++++ .../overlay/boot/extlinux/extlinux.conf | 4 + ...-fix-stm32mp157c-odyssey-card-detect.patch | 36 ++++ configs/stm32mp157c_odyssey_defconfig | 31 +++ 6 files changed, 279 insertions(+) create mode 100644 board/seeed/stm32mp157c-odyssey/genimage.cfg create mode 100644 board/seeed/stm32mp157c-odyssey/linux.config create mode 100644 board/seeed/stm32mp157c-odyssey/overlay/boot/extlinux/extlinux.conf create mode 100644 board/seeed/stm32mp157c-odyssey/patches/linux/5.10.1/0001-ARM-dts-stm32-fix-stm32mp157c-odyssey-card-detect.patch create mode 100644 configs/stm32mp157c_odyssey_defconfig
DEVELOPERS +4 -0
@@ -2498,6 +2498,10 @@ F: package/xscreensaver/ F: package/zmqpp/ F: package/zyre/ +N: Simon Doppler <[email protected]> +F: board/seeed/ +F: configs/stm32mp157c_odyssey_defconfig + N: Spenser Gilliland <[email protected]> F: arch/Config.in.microblaze F: package/a10disp/
board/seeed/stm32mp157c-odyssey/genimage.cfg new file +22 -0
@@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + gpt = "true" + } + + partition fsbl1 { + image = "tf-a-stm32mp157c-odyssey.stm32" + } + + partition fsbl2 { + image = "tf-a-stm32mp157c-odyssey.stm32" + } + + partition ssbl { + image = "u-boot.stm32" + } + + partition rootfs { + image = "rootfs.ext4" + bootable = "yes" + } +}
board/seeed/stm32mp157c-odyssey/linux.config new file +182 -0
182 lines not on this page · raw message
board/seeed/stm32mp157c-odyssey/overlay/boot/extlinux/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label stm32mp157c-odyssey-buildroot + kernel /boot/zImage + devicetree /boot/stm32mp157c-odyssey.dtb + append root=/dev/mmcblk0p4 rootwait
board/seeed/stm32mp157c-odyssey/patches/linux/5.10.1/0001-ARM-dts-stm32-fix-stm32mp157c-odyssey-card-detect.patch new file +36 -0
@@ -0,0 +1,36 @@ +From 0171b07373cc8c2815ca5fa79a7308fdefa54ca4 Mon Sep 17 00:00:00 2001 +From: Grzegorz Szymaszek <[email protected]> +Date: Sat, 10 Apr 2021 21:35:21 +0200 +Subject: [PATCH] ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The microSD card detect pin is physically connected to the MPU pin PI3. +The Device Tree configuration of the card detect pin was wrong—it was +set to pin PB7 instead. If such configuration was used, the kernel would +hang on “Waiting for root device” when booting from a microSD card. + +Signed-off-by: Grzegorz Szymaszek <[email protected]> +Signed-off-by: Alexandre Torgue <[email protected]> +Backported from: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm/boot/dts/stm32mp157c-odyssey.dts?id=0171b07373cc8c2815ca5fa79a7308fdefa54ca4 +--- + arch/arm/boot/dts/stm32mp157c-odyssey.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts +index a7ffec8f1516..be1dd5e9e744 100644 +--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts ++++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts +@@ -64,7 +64,7 @@ &sdmmc1 { + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; +- cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; ++ cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; +-- +2.30.2 +
configs/stm32mp157c_odyssey_defconfig new file +31 -0
@@ -0,0 +1,31 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_GLOBAL_PATCH_DIR="board/seeed/stm32mp157c-odyssey/patches" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y +BR2_ROOTFS_OVERLAY="board/seeed/stm32mp157c-odyssey/overlay/" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/seeed/stm32mp157c-odyssey/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.1" +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/seeed/stm32mp157c-odyssey/linux.config" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32mp157c-odyssey" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="STM32MP_SDMMC=1 AARCH32_SP=sp_min DTB_FILE_NAME=stm32mp157c-odyssey.dtb" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="*.stm32" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted" +BR2_TARGET_UBOOT_NEEDS_DTC=y +# BR2_TARGET_UBOOT_FORMAT_BIN is not set +BR2_TARGET_UBOOT_FORMAT_STM32=y +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp157c-odyssey" +BR2_PACKAGE_HOST_GENIMAGE=y
--
2.30.2
_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot
Hello Simon,
Quoted 6 lines · On Mon, 02 Aug 2021 20:20:57 +0000 [email protected] wrote:
From: Simon Doppler <[email protected]>
STM32MP157C-Odyssey reference:
https://wiki.seeedstudio.com/ODYSSEY-STM32MP157C/Signed-off-by Simon Doppler <[email protected]>
It all looks very good to me. The only last missing bit is a board/seeed/stm32mp157c-odyssey/readme.txt that briefly describes how to use this defconfig. See board/stmicroelectronics/stm32mp157c-dk2/readme.txt for an example.
With this added, your defconfig will be ready to be merged in Buildroot.
Thanks a lot!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com _______________________________________________ buildroot mailing list [email protected] http://lists.busybox.net/mailman/listinfo/buildroot