Skip to contentSkip to conversation

x86: crownbay: Enable SeaBIOS support

PATCH In review Bin Meng 2 participants 6 messages Aug 3, 2021 – Aug 13, 2021

lore
Share & tools
lore

Bin Meng

author
#0 lore raw

PATCH 1/2 x86: crownbay: Enable SeaBIOS support

Enable SeaBIOS support for any kernel that requires legacy BIOS services.

---

 configs/crownbay_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/crownbay_defconfig +1 -0
index d7ee0fe45e..1923f89b9a 100644
@@ -12,6 +12,7 @@ CONFIG_DISABLE_IGD=y
 CONFIG_SMP=y
 CONFIG_GENERATE_PIRQ_TABLE=y
 CONFIG_GENERATE_MP_TABLE=y
+CONFIG_SEABIOS=y
 CONFIG_FIT=y
 CONFIG_SHOW_BOOT_PROGRESS=y
 CONFIG_USE_BOOTARGS=y
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH 2/2 doc: x86: Update SeaBIOS build instructions

Update SeaBIOS build instructions using exact command that involves "make olddefconfig", and mention SeaBIOS release 1.14.0 has been used for testing.

---

 doc/arch/x86.rst | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)
doc/arch/x86.rst +8 -13
index 0fdd43be80..5494155a51 100644
@@ -379,24 +379,19 @@ Booting SeaBIOS is done via U-Boot's bootelf command, like below::
    Using e1000#0 device
    TFTP from server 10.10.0.100; our IP address is 10.10.0.108
    ...
-   Bytes transferred = 122124 (1dd0c hex)
-   ## Starting application at 0x000ff06e ...
-   SeaBIOS (version rel-1.9.0)
+   Bytes transferred = 128748 (1f6ec hex)
+   ## Starting application at 0x000fd269 ...
+   SeaBIOS (version rel-1.14.0-0-g155821a)
    ...
 
-bios.bin.elf is the SeaBIOS image built from SeaBIOS source tree.
-Make sure it is built as follows::
-
-   $ make menuconfig
-
-Inside the "General Features" menu, select "Build for coreboot" as the
-"Build Target". Inside the "Debugging" menu, turn on "Serial port debugging"
-so that we can see something as soon as SeaBIOS boots. Leave other options
-as in their default state. Then::
+bios.bin.elf is the SeaBIOS image built from SeaBIOS source tree. At the time
+being, SeaBIOS release 1.14.0 has been tested. To build the SeaBIOS image::
 
+   $ echo -e 'CONFIG_COREBOOT=y\nCONFIG_COREBOOT_FLASH=n\nCONFIG_DEBUG_SERIAL=y\nCONFIG_DEBUG_COREBOOT=n' > .config
+   $ make olddefconfig
    $ make
    ...
-   Total size: 121888  Fixed: 66496  Free: 9184 (used 93.0% of 128KiB rom)
+   Total size: 128512  Fixed: 69216  Free: 2560 (used 98.0% of 128KiB rom)
    Creating out/bios.bin.elf
 
 Currently this is tested on QEMU x86 target with U-Boot chain-loading SeaBIOS
Signature · 1 line
2.25.1
Reviewed-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] doc: x86: Update SeaBIOS build instructions

Quoted 10 lines · Bin Meng

Update SeaBIOS build instructions using exact command that involves "make olddefconfig", and mention SeaBIOS release 1.14.0 has been used for testing.

---

 doc/arch/x86.rst | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)
author
#3 lore raw

Re: [PATCH 2/2] doc: x86: Update SeaBIOS build instructions

Quoted 7 lines · Simon Glass
Quoted 5 lines · Bin Meng

Update SeaBIOS build instructions using exact command that involves "make olddefconfig", and mention SeaBIOS release 1.14.0 has been used for testing.

Quoted 7 lines
Quoted 5 lines

---

 doc/arch/x86.rst | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

applied to u-boot-x86, thanks!

author
#5 lore raw
Quoted 6 lines · Simon Glass
Quoted 4 lines · Bin Meng

Enable SeaBIOS support for any kernel that requires legacy BIOS services.

Quoted 8 lines
Quoted 6 lines

---

 configs/crownbay_defconfig | 1 +
 1 file changed, 1 insertion(+)

applied to u-boot-x86, thanks!