Skip to contentSkip to conversation

libkmod-module: add support for a patient module removal option

PATCH In review Luis Chamberlain 2 participants 4 messages Aug 3, 2021 – Aug 6, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 libkmod-module: add support for a patient module removal option

When doing tests with modules such as scsi_debug, on test frameworks such as fstests [0] you may run into situations where false positives are triggered and a test fails but the reality is that the test did not fail, but what did fail was the removal of the module since the refcnt is not yet 0, as there is a delay in between umount and the module quiesces. This is documented on korg#21233 [1].

Although there are patches for fstests to account for this [2] and work around it, a much suitable solution long term is for these hacks to use a patient module remover from modprobe directly. This patch does just that, it adds the -p option and --remove-patiently to modprobe which let's a removal attempt wait until the refcnt is 0. This is useful for cases where you know the refcnt is going to become 0, and it is just a matter of time.

This adds a new call kmod_module_get_refcnt_wait() which works just as kmod_module_get_refcnt() but gives you the option to patiently wait. This then updates modprobe, rmmod to support this feature usign the -p or --remove-patiently argument.

[0] git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git
[1] https://bugzilla.kernel.org/show_bug.cgi?id=21233
[2] https://lkml.kernel.org/r/[email protected]

---

Cc'ing folks who I think *might* be interested in a patient module removal such as live-patching and blktests folks.

 libkmod/docs/libkmod-sections.txt  |  1 +
 libkmod/libkmod-module.c           | 50 ++++++++++++++++++++++++++++++
 libkmod/libkmod.h                  |  1 +
 libkmod/libkmod.sym                |  1 +
 libkmod/python/kmod/_libkmod_h.pxd |  1 +
 libkmod/python/kmod/module.pyx     |  4 +++
 man/modprobe.xml                   | 22 +++++++++++++
 man/rmmod.xml                      | 23 ++++++++++++++
 tools/modprobe.c                   | 11 +++++--
 tools/remove.c                     | 10 ++++--
 tools/rmmod.c                      |  9 ++++--
 11 files changed, 127 insertions(+), 6 deletions(-)
libkmod/docs/libkmod-sections.txt +1 -0
index e59ab7a..311a19a 100644
@@ -102,5 +102,6 @@ kmod_module_get_initstate
 kmod_module_initstate_str
 kmod_module_get_size
 kmod_module_get_refcnt
+kmod_module_get_refcnt_wait
 kmod_module_get_holders
 </SECTION>
libkmod/libkmod-module.c +50 -0

56 lines not on this page · raw message

libkmod/libkmod.h +1 -0
index 3cab2e5..b8171d6 100644
@@ -217,6 +217,7 @@ enum kmod_module_initstate {
 const char *kmod_module_initstate_str(enum kmod_module_initstate state);
 int kmod_module_get_initstate(const struct kmod_module *mod);
 int kmod_module_get_refcnt(const struct kmod_module *mod);
+int kmod_module_get_refcnt_wait(const struct kmod_module *mod, bool wait);
 struct kmod_list *kmod_module_get_holders(const struct kmod_module *mod);
 struct kmod_list *kmod_module_get_sections(const struct kmod_module *mod);
 const char *kmod_module_section_get_name(const struct kmod_list *entry);
libkmod/libkmod.sym +1 -0
index 5f5e1fb..002d3ce 100644
@@ -49,6 +49,7 @@ global:
 	kmod_module_initstate_str;
 	kmod_module_get_initstate;
 	kmod_module_get_refcnt;
+	kmod_module_get_refcnt_wait;
 	kmod_module_get_sections;
 	kmod_module_section_free_list;
 	kmod_module_section_get_name;
libkmod/python/kmod/_libkmod_h.pxd +1 -0
index 7191953..2c744fc 100644
@@ -99,6 +99,7 @@ cdef extern from 'libkmod/libkmod.h':
     # Information regarding "live information" from module's state, as
     # returned by kernel
     int kmod_module_get_refcnt(const_kmod_module_ptr mod)
+    int kmod_module_get_refcnt_wait(const_kmod_module_ptr mod, bool install)
     long kmod_module_get_size(const_kmod_module_ptr mod)
 
     # Information retrieved from ELF headers and section
libkmod/python/kmod/module.pyx +4 -0
index 42aa92e..45fe774 100644
@@ -72,6 +72,10 @@ cdef class Module (object):
         return _libkmod_h.kmod_module_get_refcnt(self.module)
     refcnt = property(fget=_refcnt_get)
 
+    def _refcnt_get_wait(self, wait=False):
+        return _libkmod_h.kmod_module_get_refcnt_wait(self.module, wait)
+    refcnt = property(fget=_refcnt_get_wait)
+
     def _size_get(self):
         return _libkmod_h.kmod_module_get_size(self.module)
     size = property(fget=_size_get)
man/modprobe.xml +22 -0
index 0372b6b..50730e0 100644
@@ -388,6 +388,28 @@
           </para>
         </listitem>
       </varlistentry>
+      <varlistentry>
+        <term>
+          <option>-p</option>
+        </term>
+        <term>
+          <option>--remove-patiently</option>
+        </term>
+        <listitem>
+          <para>
+            This option causes <command>modprobe</command> to try to patiently
+            remove a module by waiting until its refcnt is 0. It checks the refcnt
+            and if its 0 it will immediately remove the module. If the refcnt is
+            not 0, it will sleep 1 second and check the refcnt again, and repeat
+            this until an error is found or the refcnt is 0. You can send a signal
+            to this command if you do not want to wait anymore.
+          </para>
+          <para>
+            Removing modules may be done by test infrastruture code, it can also
+            be done to remove a live kernel patch.
+          </para>
+        </listitem>
+      </varlistentry>
       <varlistentry>
         <term>
           <option>-S</option>
man/rmmod.xml +23 -0
index e7c7e5f..55df09d 100644
@@ -39,6 +39,7 @@
     <cmdsynopsis>
       <command>rmmod</command>
       <arg><option>-f</option></arg>
+      <arg><option>-p</option></arg>
       <arg><option>-s</option></arg>
       <arg><option>-v</option></arg>
       <arg><replaceable>modulename</replaceable></arg>
@@ -92,6 +93,28 @@
           </para>
         </listitem>
       </varlistentry>
+      <varlistentry>
+        <term>
+          <option>-p</option>
+        </term>
+        <term>
+          <option>--remove-patiently</option>
+        </term>
+        <listitem>
+          <para>
+            This option tries to remove the module patiently by waiting
+            until the module refcnt is 0. It checks the refcnt
+            and if its 0 it will immediately remove the module. If the refcnt is
+            not 0, it will sleep 1 second and check the refcnt again, and repeat
+            this until an error is found or the refcnt is 0. You can send a signal
+            to this command if you do not want to wait anymore.
+          </para>
+          <para>
+            Removing modules may be done by test infrastruture code, it can also
+            be done to remove a live kernel patch.
+          </para>
+        </listitem>
+      </varlistentry>
       <varlistentry>
         <term>
           <option>-s</option>
tools/modprobe.c +9 -2
index 9387537..1151643 100644
@@ -56,11 +56,13 @@ static int strip_modversion = 0;
 static int strip_vermagic = 0;
 static int remove_dependencies = 0;
 static int quiet_inuse = 0;
+static int do_remove_patient = 0;
 
-static const char cmdopts_s[] = "arRibfDcnC:d:S:sqvVh";
+static const char cmdopts_s[] = "arpRibfDcnC:d:S:sqvVh";
 static const struct option cmdopts[] = {
 	{"all", no_argument, 0, 'a'},
 	{"remove", no_argument, 0, 'r'},
+	{"remove-patiently", no_argument, 0, 'p'},
 	{"remove-dependencies", no_argument, 0, 5},
 	{"resolve-alias", no_argument, 0, 'R'},
 	{"first-time", no_argument, 0, 3},
@@ -107,6 +109,7 @@ static void help(void)
 		"\t                            be a module name to be inserted\n"
 		"\t                            or removed (-r)\n"
 		"\t-r, --remove                Remove modules instead of inserting\n"
+		"\t-p, --remove-patiently      Patiently wait until the refcnt is 0 to remove\n"
 		"\t    --remove-dependencies   Also remove modules depending on it\n"
 		"\t-R, --resolve-alias         Only lookup and print alias and exit\n"
 		"\t    --first-time            Fail if module already inserted or removed\n"
@@ -424,7 +427,7 @@ static int rmmod_do_module(struct kmod_module *mod, int flags)
 	}
 
 	if (!ignore_loaded && !cmd) {
-		int usage = kmod_module_get_refcnt(mod);
+		int usage = kmod_module_get_refcnt_wait(mod, do_remove_patient);
 
 		if (usage > 0) {
 			if (!quiet_inuse)
@@ -785,6 +788,10 @@ static int do_modprobe(int argc, char **orig_argv)
 		case 'r':
 			do_remove = 1;
 			break;
+		case 'p':
+			do_remove = 1;
+			do_remove_patient = 1;
+			break;
 		case 5:
 			remove_dependencies = 1;
 			break;
tools/remove.c +8 -2
index 387ef0e..313c7ed 100644
@@ -27,9 +27,12 @@
 
 #include "kmod.h"
 
-static const char cmdopts_s[] = "h";
+static int do_remove_patient = 0;
+
+static const char cmdopts_s[] = "hp";
 static const struct option cmdopts[] = {
 	{"help", no_argument, 0, 'h'},
+	{"remove-patiently", no_argument, 0, 'p'},
 	{ }
 };
 
@@ -74,7 +77,7 @@ static int check_module_inuse(struct kmod_module *mod) {
 		return -EBUSY;
 	}
 
-	ret = kmod_module_get_refcnt(mod);
+	ret = kmod_module_get_refcnt_wait(mod, do_remove_patient);
 	if (ret > 0) {
 		ERR("Module %s is in use\n", kmod_module_get_name(mod));
 		return -EBUSY;
@@ -101,6 +104,9 @@ static int do_remove(int argc, char *argv[])
 		case 'h':
 			help();
 			return EXIT_SUCCESS;
+		case 'p':
+			do_remove_patient = 1;
+			break;
 
 		default:
 			ERR("Unexpected getopt_long() value '%c'.\n", c);
tools/rmmod.c +7 -2
index 3942e7b..16ce642 100644
@@ -35,10 +35,12 @@
 #define DEFAULT_VERBOSE LOG_ERR
 static int verbose = DEFAULT_VERBOSE;
 static int use_syslog;
+static int do_remove_patient;
 
-static const char cmdopts_s[] = "fsvVwh";
+static const char cmdopts_s[] = "fpsvVwh";
 static const struct option cmdopts[] = {
 	{"force", no_argument, 0, 'f'},
+	{"remove-patiently", no_argument, 0, 'p'},
 	{"syslog", no_argument, 0, 's'},
 	{"verbose", no_argument, 0, 'v'},
 	{"version", no_argument, 0, 'V'},
@@ -93,7 +95,7 @@ static int check_module_inuse(struct kmod_module *mod) {
 		return -EBUSY;
 	}
 
-	ret = kmod_module_get_refcnt(mod);
+	ret = kmod_module_get_refcnt_wait(mod, do_remove_patient);
 	if (ret > 0) {
 		ERR("Module %s is in use\n", kmod_module_get_name(mod));
 		return -EBUSY;
@@ -120,6 +122,9 @@ static int do_rmmod(int argc, char *argv[])
 		case 'f':
 			flags |= KMOD_REMOVE_FORCE;
 			break;
+		case 'p':
+			do_remove_patient = 1;
+			break;
 		case 's':
 			use_syslog = 1;
 			break;
Signature · 1 line
2.30.2
#1 lore raw
Quoted 1 line · Luis Chamberlain

+ diff --git a/libkmod/libkmod-module.c b/libkmod/libkmod-module.c

<-- snip -->

libkmod/libkmod-module.c KMOD_EXPORT int kmod_module_get_refcnt(const struct kmod_module *mod) · line 1961

Quoted 1 line
libkmod/libkmod-module.c +1 -0
+		ERR(mod->ctx, "%s refcnt is %ld waiting for it to become 0\n", mod->name, refcnt);

OK after running many tests with this I think we need to just expand this so that the error message only applies when -v is passed to modprobe, otherwise we get the print message every time, and using INFO() doesn't cut it, given the next priority level available to the library is LOG_INFO (6) and when modprobe -v is passed we set the log level to LOG_NOTICE (5), so we need a new NOTICE(). I'll send a v2 with that included as a separate patch.

Luis

#2 lore raw
Quoted 12 lines · Luis Chamberlain
Quoted 1 line · Luis Chamberlain

+ diff --git a/libkmod/libkmod-module.c b/libkmod/libkmod-module.c

<-- snip -->

libkmod/libkmod-module.c KMOD_EXPORT int kmod_module_get_refcnt(const struct kmod_module *mod) · line 1961

Quoted 1 line
libkmod/libkmod-module.c +1 -0
+		ERR(mod->ctx, "%s refcnt is %ld waiting for it to become 0\n", mod->name, refcnt);

OK after running many tests with this I think we need to just expand this so that the error message only applies when -v is passed to modprobe, otherwise we get the print message every time, and using INFO() doesn't cut it, given the next priority level available to the library is LOG_INFO (6) and when modprobe -v is passed we set the log level to LOG_NOTICE (5), so we need a new NOTICE(). I'll send a v2 with that included as a separate patch.

Or maybe move the sleep to modprobe instead of doing it in the library? The sleep(1) seems like an arbitrary number to be introduced in the lib.

Since kernfs is pollable, maybe we could rather introduce an API to return the pid in which the application has to wait for and then the application can use whatever it wants to poll, including controlling a timeout.

I'm saying this because sleep(1) may be all fine for modprobe, but for other applications using libkmod it may not play well with their mainloops (and they may want to control both granularity of the sleep and a max timeout).

thanks
Lucas De Marchi

Quoted 2 lines

Luis

#3 lore raw
Quoted 14 lines · Lucas De Marchi
Quoted 12 lines · Luis Chamberlain
Quoted 1 line · Luis Chamberlain

+ diff --git a/libkmod/libkmod-module.c b/libkmod/libkmod-module.c

<-- snip -->

libkmod/libkmod-module.c KMOD_EXPORT int kmod_module_get_refcnt(const struct kmod_module *mod) · line 1961

Quoted 1 line
libkmod/libkmod-module.c +1 -0
+		ERR(mod->ctx, "%s refcnt is %ld waiting for it to become 0\n", mod->name, refcnt);

OK after running many tests with this I think we need to just expand this so that the error message only applies when -v is passed to modprobe, otherwise we get the print message every time, and using INFO() doesn't cut it, given the next priority level available to the library is LOG_INFO (6) and when modprobe -v is passed we set the log level to LOG_NOTICE (5), so we need a new NOTICE(). I'll send a v2 with that included as a separate patch.

Quoted 2 lines

Or maybe move the sleep to modprobe instead of doing it in the library?

We have a few callers which need to impement the wait, and so having a library call is one way to share code. I realized this while first open coding this in each call site and realizing I was just re-inventing the wheel.

Quoted 2 lines

The sleep(1) seems like an arbitrary number to be introduced in the lib.

Indeed, the ideal thing here is to introduce then a timeout, and have a default setting, which code can override.

Quoted 3 lines

Since kernfs is pollable,
maybe we could rather introduce an API to return the pid in which the application has to wait for

The kernel does not have information to provide userspace any information for how long it should wait. I mean, in a test case I am using its an lvm pvremove and for some reason it seems the removal is asynchronously putting the module refcnt (even though I do not believe DM_DEFERRED_REMOVE is ever set by default), and I had fixed the kernel's own asynchronous removal of the request_queue a little while back so I don't think that's the issue either.

If you mean to consider adding *more* information to the kernel, as a new feature, I'm afraid any PID triggering a bump in the refcnt is ephemeral, and so I don't think it would help. It would only be useful if userspace *knew* it would trigger a recnt bump, and that seems likely a promise we would probaby want to break any time. Unless we want to get into the business of granting userspace the ability to bump refcnt's with new structural information it promises is legit. Then userspace can query for this. However that still seems overkill, I can't see a need for it yet.

Quoted 3 lines

and then the
application can use whatever it wants to poll, including controlling a timeout.

A dynamic timeout seems sensible indeed.

Quoted 4 lines

I'm saying this because sleep(1) may be all fine for modprobe, but for other applications using libkmod it may not play well with their mainloops (and they may want to control both granularity of the sleep and a max timeout).

Indeed. A default timeout set into the context seem to be the way to go, which callers can override. Then modprobe -t <ms_wait> can use this caller to update the ctx timeout to a setting.

I'll post a v2 with these changes.

Luis