engicam: Rename board dir, px30_core to px30
Subsystems (3)
PATCH 1/1 engicam: Rename board dir, px30_core to px30
Engicam hardware design solutions are based on System On Modules(SoM) with various SoCs like i.MX6, i.MX8 and PX30 etc.
The current directory structure uses the simplest way to understand these designs by listing each of these SoC in board/engicam/SoC and inside SoC directory has SoM file name as a board file name.
Right now all of the SoC's follow a similar approach except px30. So rename px30_core to px30.
---
Note:
This patch is on top of
https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
arch/arm/mach-rockchip/px30/Kconfig | 2 +-
board/engicam/{px30_core => px30}/Kconfig | 2 +-
board/engicam/{px30_core => px30}/MAINTAINERS | 0
board/engicam/{px30_core => px30}/Makefile | 0
board/engicam/{px30_core => px30}/px30_core.c | 0
5 files changed, 2 insertions(+), 2 deletions(-)
rename board/engicam/{px30_core => px30}/Kconfig (90%)
rename board/engicam/{px30_core => px30}/MAINTAINERS (100%)
rename board/engicam/{px30_core => px30}/Makefile (100%)
rename board/engicam/{px30_core => px30}/px30_core.c (100%)arch/arm/mach-rockchip/px30/Kconfig +1 -1
@@ -68,7 +68,7 @@ config DEBUG_UART_CHANNEL For using the UART for early debugging the route to use needs to be declared (0 or 1). -source "board/engicam/px30_core/Kconfig" +source "board/engicam/px30/Kconfig" source "board/hardkernel/odroid_go2/Kconfig" source "board/rockchip/evb_px30/Kconfig"
board/engicam/px30/Kconfig renamed from board/engicam/px30_core/Kconfig +1 -1
@@ -1,7 +1,7 @@ if TARGET_PX30_CORE config SYS_BOARD - default "px30_core" + default "px30" config SYS_VENDOR default "engicam"
board/engicam/px30/MAINTAINERS renamed from board/engicam/px30_core/MAINTAINERS +0 -0
board/engicam/px30/Makefile renamed from board/engicam/px30_core/Makefile +0 -0
board/engicam/px30/px30_core.c renamed from board/engicam/px30_core/px30_core.c +0 -0
Signature · 1 line
2.25.1
Hi Jagan,
Please add 'rockchip' prefix in the subject.
Thanks,
- Kever
Quoted 68 lines · Jagan Teki
Engicam hardware design solutions are based on System On Modules(SoM) with various SoCs like i.MX6, i.MX8 and PX30 etc.
The current directory structure uses the simplest way to understand these designs by listing each of these SoC in board/engicam/SoC and inside SoC directory has SoM file name as a board file name.
Right now all of the SoC's follow a similar approach except px30. So rename
px30_coreto px30.Signed-off-by Jagan Teki <[email protected]>---
Note:
This patch is on top of
https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/arch/arm/mach-rockchip/px30/Kconfig | 2 +- board/engicam/{px30_core => px30}/Kconfig | 2 +- board/engicam/{px30_core => px30}/MAINTAINERS | 0 board/engicam/{px30_core => px30}/Makefile | 0 board/engicam/{px30_core => px30}/px30_core.c | 0 5 files changed, 2 insertions(+), 2 deletions(-)rename board/engicam/{px30_core => px30}/Kconfig (90%) rename board/engicam/{px30_core => px30}/MAINTAINERS (100%) rename board/engicam/{px30_core => px30}/Makefile (100%) rename board/engicam/{px30_core =>
px30}/px30_core.c(100%)arch/arm/mach-rockchip/px30/Kconfig +1
-1@@ -68,7 +68,7 @@ config DEBUG_UART_CHANNEL For using the UART for early debugging the route to use needs to be declared (0 or 1). -source "board/engicam/px30_core/Kconfig" +source "board/engicam/px30/Kconfig" source "board/hardkernel/odroid_go2/Kconfig" source "board/rockchip/evb_px30/Kconfig"board/engicam/px30/Kconfig renamed from board/engicam/px30_core/Kconfig +1
-1@@ -1,7 +1,7 @@ if TARGET_PX30_CORE config SYS_BOARD - default "px30_core" + default "px30" config SYS_VENDOR default "engicam"board/engicam/px30/MAINTAINERS renamed from board/engicam/px30_core/MAINTAINERS +0
-0board/engicam/px30/Makefile renamed from board/engicam/px30_core/Makefile +0
-0board/engicam/px30/px30_core.c renamed from board/engicam/px30_core/px30_core.c +0
-0