Skip to contentSkip to conversation

Bluetooth: btintel: Refactoring setup routines

PATCH In review Tedd Ho-Jeong An 3 participants 15 messages Aug 5, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v7 cover Bluetooth: btintel: Refactoring setup routines

From: Tedd Ho-Jeong An <[email protected]>

Changes in v7:
- Rebase the patchsets to the tip of the bluetooth-next 6eefec4a0 ("Bluetooth: Add additional Bluetooth part for Realtek 8852AE")

- Some basic testing were done with the following Intel devices to verify the firmware loading and some profiles (LE HID, A2DP, HFP)

	WP2_B3
	WP2_B5
	StP
	SdP
	SfP
	WsP
	ThP
	CcP
	TyP

This patch set refactors the multiple setup routines for various Intel devices to a combined single entry. Here are the highlight of the changes:

1. Updated hci_alloc_dev() to allocate the hdev object with an extra buffer for the private data. btintel introduces the btintel_data struct and store it to the private data in hdev object.

2. Added a single entry for setup and shutdown and uses the HCI_Intel_Read_Version command to identify the device, instead of relying on the USB VID and PID. The new HCI_Intel_Read_Version command is used for both legacy ROM, legacy Bootloader and TLV based bootloader.

Also, btintel_configure_setup() is added to setup the most of hdev callbacks, unless it is a transport specific functions.

After identifying the device, it calls the corresponding setup routines. These routines were copied from btusb to btintel and changes are none or very minimal.

3. Keep the state of bootloader in btintel object. The bootloader state is agnostic to the transport type, so btintel uses the btintel_data to keep track of the state in the private data section in hdev.

Also, added macros to set/clear/test flags to simplify the code.

5. Cleaned up the exported functions and make it static as much as possible if not necessary.

6. From the JfP/ThP, the operational firmware support the new TLV based HCI_Intel_Read_Version command, which confues the usage during the setup routine. So, the check for firmware variant of those legacy bootloader sku is added to use the legacy bootloader setup call.

7. All of HCI quirks for Intel devices are moved in the setup routines. There are several HCI quirks for Intel devices and some of them are for all Intel devices and some of them are for a specific devices.

The flag for HCI quirks are removed from the .driver_info, and applying HCI quirks are done in combined setup routine depends on the hw_variant.

8. Combined the setting the MSFT extension support in the combined setup routine now depends on the hw_variant.

Tedd Ho-Jeong An (12):
Bluetooth: Add support hdev to allocate private data
Bluetooth: btintel: Add combined setup and shutdown functions
Bluetooth: btintel: Refactoring setup routine for legacy ROM sku
Bluetooth: btintel: Add btintel data struct
Bluetooth: btintel: Fix the first HCI command not work with ROM device
Bluetooth: btintel: Fix the LED is not turning off immediately
Bluetooth: btintel: Add combined set_diag functions
Bluetooth: btintel: Refactoring setup routine for bootloader devices
Bluetooth: btintel: Move hci quirks to setup routine
Bluetooth: btintel: Clean the exported function to static
Bluetooth: btintel: Fix the legacy bootloader returns tlv based
version
Bluetooth: btintel: Combine setting up MSFT extension

 drivers/bluetooth/btintel.c      | 1314 ++++++++++++++++++++++++++++--
 drivers/bluetooth/btintel.h      |  119 ++-
 drivers/bluetooth/btusb.c        | 1128 +------------------------
 include/net/bluetooth/hci_core.h |   13 +-
 net/bluetooth/hci_core.c         |   13 +-
 5 files changed, 1364 insertions(+), 1223 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v7 1/12 Bluetooth: Add support hdev to allocate private data

From: Tedd Ho-Jeong An <[email protected]>

This patch adds support hdev to allocate extra size for private data. The size of private data is specified in the hdev_alloc_size(priv_size) and the allocated buffer can be accessed with hci_get_priv(hdev).

---
 include/net/bluetooth/hci_core.h | 13 ++++++++++++-
 net/bluetooth/hci_core.c         | 13 ++++++++++---
 2 files changed, 22 insertions(+), 4 deletions(-)
include/net/bluetooth/hci_core.h +12 -1
index b011eeea28c3..a7d06d7da602 100644
@@ -1224,10 +1224,21 @@ static inline void hci_set_drvdata(struct hci_dev *hdev, void *data)
 	dev_set_drvdata(&hdev->dev, data);
 }
 
+static inline void *hci_get_priv(struct hci_dev *hdev)
+{
+	return (char *)hdev + sizeof(*hdev);
+}
+
 struct hci_dev *hci_dev_get(int index);
 struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src, u8 src_type);
 
-struct hci_dev *hci_alloc_dev(void);
+struct hci_dev *hci_alloc_dev_priv(int sizeof_priv);
+
+static inline struct hci_dev *hci_alloc_dev(void)
+{
+	return hci_alloc_dev_priv(0);
+}
+
 void hci_free_dev(struct hci_dev *hdev);
 int hci_register_dev(struct hci_dev *hdev);
 void hci_unregister_dev(struct hci_dev *hdev);
net/bluetooth/hci_core.c +10 -3
index 2b78e1336c53..cb2e9e513907 100644
@@ -3751,11 +3751,18 @@ static int hci_suspend_notifier(struct notifier_block *nb, unsigned long action,
 }
 
 /* Alloc HCI device */
-struct hci_dev *hci_alloc_dev(void)
+struct hci_dev *hci_alloc_dev_priv(int sizeof_priv)
 {
 	struct hci_dev *hdev;
+	unsigned int alloc_size;
 
-	hdev = kzalloc(sizeof(*hdev), GFP_KERNEL);
+	alloc_size = sizeof(*hdev);
+	if (sizeof_priv) {
+		/* Fixme: May need ALIGN-ment? */
+		alloc_size += sizeof_priv;
+	}
+
+	hdev = kzalloc(alloc_size, GFP_KERNEL);
 	if (!hdev)
 		return NULL;
 
@@ -3869,7 +3876,7 @@ struct hci_dev *hci_alloc_dev(void)
 
 	return hdev;
 }
-EXPORT_SYMBOL(hci_alloc_dev);
+EXPORT_SYMBOL(hci_alloc_dev_priv);
 
 /* Free HCI device */
 void hci_free_dev(struct hci_dev *hdev)
Signature · 1 line
2.25.1
#2 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=526621

---Test result---

Test Summary:

CheckPatch                    PASS      8.50 seconds
GitLint                       PASS      1.44 seconds
BuildKernel                   PASS      584.15 seconds
TestRunner: Setup             PASS      401.04 seconds
TestRunner: l2cap-tester      PASS      2.78 seconds
TestRunner: bnep-tester       PASS      2.08 seconds
TestRunner: mgmt-tester       PASS      32.06 seconds
TestRunner: rfcomm-tester     PASS      2.37 seconds
TestRunner: sco-tester        PASS      2.25 seconds
TestRunner: smp-tester        FAIL      2.28 seconds
TestRunner: userchan-tester   PASS      2.12 seconds

Details
##############################
Test: CheckPatch - PASS - 8.50 seconds
Run checkpatch.pl script with rule in .checkpatch.conf

##############################
Test: GitLint - PASS - 1.44 seconds
Run gitlint with rule in .gitlint

##############################
Test: BuildKernel - PASS - 584.15 seconds
Build Kernel with minimal configuration supports Bluetooth

##############################
Test: TestRunner: Setup - PASS - 401.04 seconds
Setup environment for running Test Runner

##############################
Test: TestRunner: l2cap-tester - PASS - 2.78 seconds Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: bnep-tester - PASS - 2.08 seconds Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: mgmt-tester - PASS - 32.06 seconds Run test-runner with mgmt-tester
Total: 448, Passed: 445 (99.3%), Failed: 0, Not Run: 3

##############################
Test: TestRunner: rfcomm-tester - PASS - 2.37 seconds Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: sco-tester - PASS - 2.25 seconds Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: smp-tester - FAIL - 2.28 seconds Run test-runner with smp-tester
Total: 8, Passed: 7 (87.5%), Failed: 1, Not Run: 0

Failed Test Cases
SMP Client - SC Request 2 Failed 0.025 seconds

##############################
Test: TestRunner: userchan-tester - PASS - 2.12 seconds Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0

---
Regards,
Linux Bluetooth

c[?7lSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e742e0
input_len: 0x0000000000368e5e
output: 0x0000000001000000
output_len: 0x00000000011aa3e8
kernel_total_size: 0x0000000001030000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.14.0-rc1-g01833e4e02c0 (root@cbe6ad72cf73) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Thu Aug 5 02:03:49 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner bluetooth.enable_ecred=1TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/l2cap-tester' x86/fpu: x87 FPU will use FXSAVE
signal: max sigframe size: 1040
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/l2cap-tester
New process 42 created
Changing into directory /github/workspace

Basic L2CAP Socket - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Basic L2CAP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic L2CAP Socket - Success - setup complete
Basic L2CAP Socket - Success - run
Basic L2CAP Socket - Success - test passed
Basic L2CAP Socket - Success - teardown
Index Removed callback

    Index: 0x0000

Basic L2CAP Socket - Success - teardown complete
Basic L2CAP Socket - Success - done

Non-connected getpeername - Failure - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Non-connected getpeername - Failure - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Non-connected getpeername - Failure - setup complete Non-connected getpeername - Failure - run Non-connected getpeername - Failure - test passed Non-connected getpeername - Failure - teardown
Index Removed callback

    Index: 0x0000

Non-connected getpeername - Failure - teardown complete Non-connected getpeername - Failure - done

L2CAP BR/EDR Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Success - setup complete
L2CAP BR/EDR Client - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Success - test passed
L2CAP BR/EDR Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Success - teardown complete
L2CAP BR/EDR Client - Success - done

L2CAP BR/EDR Client SSP - Success 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client SSP - Success 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 1 - setup complete L2CAP BR/EDR Client SSP - Success 1 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 1 - test passed L2CAP BR/EDR Client SSP - Success 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client SSP - Success 1 - teardown complete L2CAP BR/EDR Client SSP - Success 1 - done

L2CAP BR/EDR Client SSP - Success 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client SSP - Success 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 2 - setup complete L2CAP BR/EDR Client SSP - Success 2 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 2 - test passed L2CAP BR/EDR Client SSP - Success 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client SSP - Success 2 - teardown complete L2CAP BR/EDR Client SSP - Success 2 - done

L2CAP BR/EDR Client PIN Code - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client PIN Code - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client PIN Code - Success - setup complete L2CAP BR/EDR Client PIN Code - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client PIN Code - Success - test passed L2CAP BR/EDR Client PIN Code - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client PIN Code - Success - teardown complete L2CAP BR/EDR Client PIN Code - Success - done

L2CAP BR/EDR Client - Read Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Read Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Read Success - setup complete L2CAP BR/EDR Client - Read Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Read Success - test passed L2CAP BR/EDR Client - Read Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Read Success - teardown complete L2CAP BR/EDR Client - Read Success - done

L2CAP BR/EDR Client - Write Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Write Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Write Success - setup complete L2CAP BR/EDR Client - Write Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Write Success - test passed L2CAP BR/EDR Client - Write Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Write Success - teardown complete L2CAP BR/EDR Client - Write Success - done

L2CAP BR/EDR Client - Invalid PSM 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 1 - setup complete L2CAP BR/EDR Client - Invalid PSM 1 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 1 - test passed L2CAP BR/EDR Client - Invalid PSM 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 1 - teardown complete L2CAP BR/EDR Client - Invalid PSM 1 - done

L2CAP BR/EDR Client - Invalid PSM 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 2 - setup complete L2CAP BR/EDR Client - Invalid PSM 2 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 2 - test passed L2CAP BR/EDR Client - Invalid PSM 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 2 - teardown complete L2CAP BR/EDR Client - Invalid PSM 2 - done

L2CAP BR/EDR Client - Invalid PSM 3 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 3 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client - Invalid PSM 3 - setup complete L2CAP BR/EDR Client - Invalid PSM 3 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 3 - test passed L2CAP BR/EDR Client - Invalid PSM 3 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 3 - teardown complete L2CAP BR/EDR Client - Invalid PSM 3 - done

L2CAP BR/EDR Client - Socket Shut WR Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Socket Shut WR Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Socket Shut WR Success - setup complete L2CAP BR/EDR Client - Socket Shut WR Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Socket Shut WR Success - test passed L2CAP BR/EDR Client - Socket Shut WR Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Socket Shut WR Success - teardown complete L2CAP BR/EDR Client - Socket Shut WR Success - done

L2CAP BR/EDR Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Success - setup complete
L2CAP BR/EDR Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Success - test passed
Successfully connected
L2CAP BR/EDR Server - Success - test passed
L2CAP BR/EDR Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Success - teardown complete
L2CAP BR/EDR Server - Success - done

L2CAP BR/EDR Server - Read Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Read Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Read Success - setup complete L2CAP BR/EDR Server - Read Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Read Success - test passed L2CAP BR/EDR Server - Read Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Read Success - teardown complete L2CAP BR/EDR Server - Read Success - done

L2CAP BR/EDR Server - Write Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Write Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Write Success - setup complete L2CAP BR/EDR Server - Write Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Write Success - test passed L2CAP BR/EDR Server - Write Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Write Success - teardown complete L2CAP BR/EDR Server - Write Success - done

L2CAP BR/EDR Server - Security Block - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Security Block - setup
Powering on controller
Controller powered on
Server enable SSP status 0x00
L2CAP BR/EDR Server - Security Block - setup complete L2CAP BR/EDR Server - Security Block - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Security Block - test passed L2CAP BR/EDR Server - Security Block - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Security Block - teardown complete L2CAP BR/EDR Server - Security Block - done

L2CAP BR/EDR Server - Invalid PSM - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid PSM - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PSM - setup complete L2CAP BR/EDR Server - Invalid PSM - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Invalid PSM - test passed L2CAP BR/EDR Server - Invalid PSM - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid PSM - teardown complete L2CAP BR/EDR Server - Invalid PSM - done

L2CAP BR/EDR Server - Invalid PDU - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid PDU - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PDU - setup complete L2CAP BR/EDR Server - Invalid PDU - run
New client connection with handle 0x002a Sending L2CAP Request from client
Bluetooth: Wrong link type (-71)
Client received response code 0x01
L2CAP BR/EDR Server - Invalid PDU - test passed L2CAP BR/EDR Server - Invalid PDU - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid PDU - teardown complete L2CAP BR/EDR Server - Invalid PDU - done

L2CAP BR/EDR Server - Invalid Disconnect CID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid Disconnect CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Disconnect CID - setup complete L2CAP BR/EDR Server - Invalid Disconnect CID - run
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Disconnect CID - test passed L2CAP BR/EDR Server - Invalid Disconnect CID - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid Disconnect CID - teardown complete L2CAP BR/EDR Server - Invalid Disconnect CID - done

L2CAP BR/EDR Server - Invalid Config CID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid Config CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Config CID - setup complete L2CAP BR/EDR Server - Invalid Config CID - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Config CID - test passed L2CAP BR/EDR Server - Invalid Config CID - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid Config CID - teardown complete L2CAP BR/EDR Server - Invalid Config CID - done

L2CAP LE Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Success - setup complete
L2CAP LE Client - Success - run
Connect in progress
Successfully connected
L2CAP LE Client - Success - test passed
L2CAP LE Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Success - teardown complete
L2CAP LE Client - Success - done

L2CAP LE Client, Direct Advertising - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client, Direct Advertising - Success - setup complete L2CAP LE Client, Direct Advertising - Success - run
Connect in progress
Received advertising parameters HCI command
L2CAP LE Client, Direct Advertising - Success - test passed L2CAP LE Client, Direct Advertising - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client, Direct Advertising - Success - teardown complete L2CAP LE Client, Direct Advertising - Success - done

L2CAP LE Client SMP - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client SMP - Success - setup complete
L2CAP LE Client SMP - Success - run
Connect in progress
Successfully connected
L2CAP LE Client SMP - Success - test passed
Bluetooth: hci0: link tx timeout
L2CAP LE Client SMP - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client SMP - Success - teardown complete
L2CAP LE Client SMP - Success - done

L2CAP LE Client - Command Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Command Reject - setup complete
L2CAP LE Client - Command Reject - run
Connect in progress
New connection with handle 0x002a
Connect failed: Connection refused (111)
L2CAP LE Client - Command Reject - test passed
L2CAP LE Client - Command Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Command Reject - teardown complete L2CAP LE Client - Command Reject - done

L2CAP LE Client - Connection Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Connection Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Connection Reject - setup complete L2CAP LE Client - Connection Reject - run
Can't connect socket: No route to host (113)
L2CAP LE Client - Connection Reject - test passed L2CAP LE Client - Connection Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Connection Reject - teardown complete L2CAP LE Client - Connection Reject - done

L2CAP LE Client - Close socket 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Close socket 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Close socket 1 - setup complete
L2CAP LE Client - Close socket 1 - run
Connect in progress, sk = 13
Will close socket during scan phase...
Checking whether scan was properly stopped...
L2CAP LE Client - Close socket 1 - test passed
L2CAP LE Client - Close socket 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Close socket 1 - teardown complete L2CAP LE Client - Close socket 1 - done

L2CAP LE Client - Close socket 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Close socket 2 - setup
Powering on controller
Controller powered on
L2CAP LE Client - Close socket 2 - setup complete
L2CAP LE Client - Close socket 2 - run
Connect in progress, sk = 13
Client set connectable status 0x00
Client set connectable status 0x00
L2CAP LE Client - Close socket 2 - test passed
L2CAP LE Client - Close socket 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Close socket 2 - teardown complete L2CAP LE Client - Close socket 2 - done

L2CAP LE Client - Open two sockets - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets - setup complete L2CAP LE Client - Open two sockets - run
Connect in progress, sk = 13
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
Successfully connected
L2CAP LE Client - Open two sockets - test passed

(l2cap-tester:42): GLib-WARNING **: 02:03:56.918: Invalid file descriptor. L2CAP LE Client - Open two sockets - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Open two sockets - teardown complete L2CAP LE Client - Open two sockets - done

L2CAP LE Client - Open two sockets close one - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets close one - setup complete L2CAP LE Client - Open two sockets close one - run
Connect in progress, sk = 13
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
Closing first socket! 13
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
L2CAP LE Client - Open two sockets close one - test passed

(l2cap-tester:42): GLib-WARNING **: 02:03:56.946: Invalid file descriptor. L2CAP LE Client - Open two sockets close one - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Open two sockets close one - teardown complete L2CAP LE Client - Open two sockets close one - done

L2CAP LE Client - Invalid PSM - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Invalid PSM - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Invalid PSM - setup complete
L2CAP LE Client - Invalid PSM - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP LE Client - Invalid PSM - test passed
L2CAP LE Client - Invalid PSM - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Invalid PSM - teardown complete
L2CAP LE Client - Invalid PSM - done

L2CAP LE Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE Server - Success - setup complete
L2CAP LE Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Successfully connected
L2CAP LE Server - Success - test passed
Client received response code 0x15
L2CAP LE Server - Success - test passed
L2CAP LE Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Server - Success - teardown complete
L2CAP LE Server - Success - done

L2CAP LE Server - Nval SCID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Server - Nval SCID - setup
Powering on controller
Controller powered on
L2CAP LE Server - Nval SCID - setup complete
L2CAP LE Server - Nval SCID - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x15
L2CAP LE Server - Nval SCID - test passed
L2CAP LE Server - Nval SCID - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Server - Nval SCID - teardown complete
L2CAP LE Server - Nval SCID - done

L2CAP Ext-Flowctl Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Success - setup complete L2CAP Ext-Flowctl Client - Success - run
Connect in progress
Successfully connected
L2CAP Ext-Flowctl Client - Success - test passed L2CAP Ext-Flowctl Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Success - teardown complete L2CAP Ext-Flowctl Client - Success - done

L2CAP Ext-Flowctl Client, Direct Advertising - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - run
Connect in progress
Received advertising parameters HCI command
L2CAP Ext-Flowctl Client, Direct Advertising - Success - test passed L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - done

L2CAP Ext-Flowctl Client SMP - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client SMP - Success - setup complete L2CAP Ext-Flowctl Client SMP - Success - run
Connect in progress
Successfully connected
L2CAP Ext-Flowctl Client SMP - Success - test passed
Bluetooth: hci0: link tx timeout
L2CAP Ext-Flowctl Client SMP - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client SMP - Success - teardown complete L2CAP Ext-Flowctl Client SMP - Success - done

L2CAP Ext-Flowctl Client - Command Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Command Reject - setup complete L2CAP Ext-Flowctl Client - Command Reject - run
Connect in progress
New connection with handle 0x002a
Connect failed: Connection refused (111)
L2CAP Ext-Flowctl Client - Command Reject - test passed L2CAP Ext-Flowctl Client - Command Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Command Reject - teardown complete L2CAP Ext-Flowctl Client - Command Reject - done

L2CAP Ext-Flowctl Client - Open two sockets - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets - setup complete L2CAP Ext-Flowctl Client - Open two sockets - run
Connect in progress, sk = 13 (deferred)
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
Successfully connected
Bluetooth: hci0: link tx timeout
L2CAP Ext-Flowctl Client - Open two sockets - test passed

(l2cap-tester:42): GLib-WARNING **: 02:03:57.068: Invalid file descriptor. L2CAP Ext-Flowctl Client - Open two sockets - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Open two sockets - teardown complete L2CAP Ext-Flowctl Client - Open two sockets - done

L2CAP Ext-Flowctl Client - Open two sockets close one - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets close one - setup complete L2CAP Ext-Flowctl Client - Open two sockets close one - run
Connect in progress, sk = 13 (deferred)
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
Closing first socket! 13
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
L2CAP Ext-Flowctl Client - Open two sockets close one - test passed

(l2cap-tester:42): GLib-WARNING **: 02:03:57.085: Invalid file descriptor. L2CAP Ext-Flowctl Client - Open two sockets close one - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Open two sockets close one - teardown complete L2CAP Ext-Flowctl Client - Open two sockets close one - done

L2CAP LE ATT Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE ATT Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE ATT Client - Success - setup complete
L2CAP LE ATT Client - Success - run
Connect in progress
Successfully connected
L2CAP LE ATT Client - Success - test passed
L2CAP LE ATT Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE ATT Client - Success - teardown complete
L2CAP LE ATT Client - Success - done

L2CAP LE ATT Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE ATT Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE ATT Server - Success - setup complete
L2CAP LE ATT Server - Success - run
Listening for connections
New client connection with handle 0x002a
Successfully connected
L2CAP LE ATT Server - Success - test passed
L2CAP LE ATT Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE ATT Server - Success - teardown complete
L2CAP LE ATT Server - Success - done

Test Summary
------------

Basic L2CAP Socket - Success                         Passed       0.064 seconds
Non-connected getpeername - Failure                  Passed       0.020 seconds
L2CAP BR/EDR Client - Success                        Passed       0.032 seconds
L2CAP BR/EDR Client SSP - Success 1                  Passed       0.022 seconds
L2CAP BR/EDR Client SSP - Success 2                  Passed       0.020 seconds
L2CAP BR/EDR Client PIN Code - Success               Passed       0.018 seconds
L2CAP BR/EDR Client - Read Success                   Passed       0.015 seconds
L2CAP BR/EDR Client - Write Success                  Passed       0.014 seconds
L2CAP BR/EDR Client - Invalid PSM 1                  Passed       0.016 seconds
L2CAP BR/EDR Client - Invalid PSM 2                  Passed       0.012 seconds
L2CAP BR/EDR Client - Invalid PSM 3                  Passed       0.012 seconds
L2CAP BR/EDR Client - Socket Shut WR Success         Passed       0.013 seconds
L2CAP BR/EDR Server - Success                        Passed       0.017 seconds
L2CAP BR/EDR Server - Read Success                   Passed       0.020 seconds
L2CAP BR/EDR Server - Write Success                  Passed       0.020 seconds
L2CAP BR/EDR Server - Security Block                 Passed       0.013 seconds
L2CAP BR/EDR Server - Invalid PSM                    Passed       0.011 seconds
L2CAP BR/EDR Server - Invalid PDU                    Passed       0.012 seconds
L2CAP BR/EDR Server - Invalid Disconnect CID         Passed       0.011 seconds
L2CAP BR/EDR Server - Invalid Config CID             Passed       0.011 seconds
L2CAP LE Client - Success                            Passed       0.022 seconds
L2CAP LE Client, Direct Advertising - Success        Passed       0.019 seconds
L2CAP LE Client SMP - Success                        Passed       0.032 seconds
L2CAP LE Client - Command Reject                     Passed       0.019 seconds
L2CAP LE Client - Connection Reject                  Passed       0.014 seconds
L2CAP LE Client - Close socket 1                     Passed       0.016 seconds
L2CAP LE Client - Close socket 2                     Passed       0.011 seconds
L2CAP LE Client - Open two sockets                   Passed       0.044 seconds
L2CAP LE Client - Open two sockets close one         Passed       0.017 seconds
L2CAP LE Client - Invalid PSM                        Passed       0.018 seconds
L2CAP LE Server - Success                            Passed       0.014 seconds
L2CAP LE Server - Nval SCID                          Passed       0.011 seconds
L2CAP Ext-Flowctl Client - Success                   Passed       0.012 seconds
L2CAP Ext-Flowctl Client, Direct Advertising - Success Passed       0.011 seconds
L2CAP Ext-Flowctl Client SMP - Success               Passed       0.016 seconds
L2CAP Ext-Flowctl Client - Command Reject            Passed       0.017 seconds
L2CAP Ext-Flowctl Client - Open two sockets          Passed       0.018 seconds
L2CAP Ext-Flowctl Client - Open two sockets close one Passed       0.018 seconds
L2CAP LE ATT Client - Success                        Passed       0.015 seconds
L2CAP LE ATT Server - Success                        Passed       0.019 seconds

Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.767 seconds
Process 42 exited with status 0
reboot: Restarting system

c[?7lSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e742e0
input_len: 0x0000000000368e5e
output: 0x0000000001000000
output_len: 0x00000000011aa3e8
kernel_total_size: 0x0000000001030000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.14.0-rc1-g01833e4e02c0 (root@cbe6ad72cf73) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Thu Aug 5 02:03:49 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner bluetooth.enable_ecred=1TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/bnep-tester' x86/fpu: x87 FPU will use FXSAVE
signal: max sigframe size: 1040
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/bnep-tester
New process 42 created
Changing into directory /github/workspace

Basic BNEP Socket - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Basic BNEP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic BNEP Socket - Success - setup complete
Basic BNEP Socket - Success - run
Basic BNEP Socket - Success - test passed
Basic BNEP Socket - Success - teardown
Index Removed callback

    Index: 0x0000

Basic BNEP Socket - Success - teardown complete
Basic BNEP Socket - Success - done

Test Summary
------------
Basic BNEP Socket - Success Passed 0.060 seconds
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0688 seconds Process 42 exited with status 0
reboot: Restarting system

c[?7lSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e742e0
input_len: 0x0000000000368e5e
output: 0x0000000001000000
output_len: 0x00000000011aa3e8
kernel_total_size: 0x0000000001030000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.14.0-rc1-g01833e4e02c0 (root@cbe6ad72cf73) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Thu Aug 5 02:03:49 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner bluetooth.enable_ecred=1TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/mgmt-tester' x86/fpu: x87 FPU will use FXSAVE
signal: max sigframe size: 1040
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/mgmt-tester
New process 42 created
Changing into directory /github/workspace

Controller setup - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Controller setup - setup
Controller setup - setup complete
Controller setup - run
Controller setup - test passed
Controller setup - teardown
Index Removed callback

    Index: 0x0000

Controller setup - teardown complete
Controller setup - done

Controller setup (BR/EDR-only) - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Controller setup (BR/EDR-only) - setup
Controller setup (BR/EDR-only) - setup complete
Controller setup (BR/EDR-only) - run
Controller setup (BR/EDR-only) - test passed
Controller setup (BR/EDR-only) - teardown
Index Removed callback

    Index: 0x0000

Controller setup (BR/EDR-only) - teardown complete Controller setup (BR/EDR-only) - done

Controller setup (LE) - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Controller setup (LE) - setup
Controller setup (LE) - setup complete
Controller setup (LE) - run
Controller setup (LE) - test passed
Controller setup (LE) - teardown
Index Removed callback

    Index: 0x0000

Controller setup (LE) - teardown complete
Controller setup (LE) - done

Invalid command - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Invalid command - setup
Invalid command - setup complete
Invalid command - run
Sending <unknown opcode> (0xffff)
Test condition added, total 1
<unknown opcode> (0xffff): Unknown Command (0x01) Test condition complete, 0 left
Invalid command - test passed
Invalid command - teardown
Index Removed callback

    Index: 0x0000

Invalid command - teardown complete
Invalid command - done

Read version - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Success - setup
Read version - Success - setup complete
Read version - Success - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Success (0x00)
Test condition complete, 0 left
Read version - Success - test passed
Read version - Success - teardown
Index Removed callback

    Index: 0x0000

Read version - Success - teardown complete
Read version - Success - done

Read version - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Invalid parameters - setup Read version - Invalid parameters - setup complete Read version - Invalid parameters - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Parameters (0x0d) Test condition complete, 0 left
Read version - Invalid parameters - test passed Read version - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read version - Invalid parameters - teardown complete Read version - Invalid parameters - done

Read version - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Invalid index - setup
Read version - Invalid index - setup complete
Read version - Invalid index - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Index (0x11)
Test condition complete, 0 left
Read version - Invalid index - test passed
Read version - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read version - Invalid index - teardown complete
Read version - Invalid index - done

Read commands - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read commands - Invalid parameters - setup Read commands - Invalid parameters - setup complete Read commands - Invalid parameters - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Parameters (0x0d) Test condition complete, 0 left
Read commands - Invalid parameters - test passed Read commands - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read commands - Invalid parameters - teardown complete Read commands - Invalid parameters - done

Read commands - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read commands - Invalid index - setup
Read commands - Invalid index - setup complete
Read commands - Invalid index - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Index (0x11)
Test condition complete, 0 left
Read commands - Invalid index - test passed
Read commands - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read commands - Invalid index - teardown complete
Read commands - Invalid index - done

Read index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read index list - Invalid parameters - setup Read index list - Invalid parameters - setup complete Read index list - Invalid parameters - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Parameters (0x0d) Test condition complete, 0 left
Read index list - Invalid parameters - test passed Read index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read index list - Invalid parameters - teardown complete Read index list - Invalid parameters - done

Read index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read index list - Invalid index - setup
Read index list - Invalid index - setup complete
Read index list - Invalid index - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Index (0x11)
Test condition complete, 0 left
Read index list - Invalid index - test passed
Read index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read index list - Invalid index - teardown complete Read index list - Invalid index - done

Read info - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read info - Invalid parameters - setup
Read info - Invalid parameters - setup complete Read info - Invalid parameters - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Parameters (0x0d) Test condition complete, 0 left
Read info - Invalid parameters - test passed
Read info - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read info - Invalid parameters - teardown complete Read info - Invalid parameters - done

Read info - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read info - Invalid index - setup
Read info - Invalid index - setup complete Read info - Invalid index - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Index (0x11) Test condition complete, 0 left
Read info - Invalid index - test passed
Read info - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read info - Invalid index - teardown complete
Read info - Invalid index - done

Read unconfigured index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read unconfigured index list - Invalid parameters - setup Read unconfigured index list - Invalid parameters - setup complete Read unconfigured index list - Invalid parameters - run
Sending Read Unconfigured Index List (0x0036)
Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Parameters (0x0d) Test condition complete, 0 left
Read unconfigured index list - Invalid parameters - test passed Read unconfigured index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read unconfigured index list - Invalid parameters - teardown complete Read unconfigured index list - Invalid parameters - done

Read unconfigured index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read unconfigured index list - Invalid index - setup Read unconfigured index list - Invalid index - setup complete Read unconfigured index list - Invalid index - run
Sending Read Unconfigured Index List (0x0036) Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Index (0x11) Test condition complete, 0 left
Read unconfigured index list - Invalid index - test passed Read unconfigured index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read unconfigured index list - Invalid index - teardown complete Read unconfigured index list - Invalid index - done

Read configuration info - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read configuration info - Invalid parameters - setup
Read configuration info - Invalid parameters - setup complete
Read configuration info - Invalid parameters - run
Sending Read Controller Configuration Information (0x0037)
Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Parameters (0x0d) Test condition complete, 0 left
Read configuration info - Invalid parameters - test passed
Read configuration info - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read configuration info - Invalid parameters - teardown complete Read configuration info - Invalid parameters - done

Read configuration info - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read configuration info - Invalid index - setup
Read configuration info - Invalid index - setup complete
Read configuration info - Invalid index - run
Sending Read Controller Configuration Information (0x0037) Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Index (0x11) Test condition complete, 0 left
Read configuration info - Invalid index - test passed
Read configuration info - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read configuration info - Invalid index - teardown complete Read configuration info - Invalid index - done

Read extended index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read extended index list - Invalid parameters - setup
Read extended index list - Invalid parameters - setup complete Read extended index list - Invalid parameters - run
Sending Read Extended Controller Index List (0x003c)
Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Parameters (0x0d) Test condition complete, 0 left
Read extended index list - Invalid parameters - test passed Read extended index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read extended index list - Invalid parameters - teardown complete Read extended index list - Invalid parameters - done

Read extended index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read extended index list - Invalid index - setup
Read extended index list - Invalid index - setup complete Read extended index list - Invalid index - run
Sending Read Extended Controller Index List (0x003c) Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Index (0x11) Test condition complete, 0 left
Read extended index list - Invalid index - test passed Read extended index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read extended index list - Invalid index - teardown complete Read extended index list - Invalid index - done

Set powered on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Success - setup
Set powered on - Success - setup complete
Set powered on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered on - Success - test passed
Set powered on - Success - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set powered on - Success - teardown complete
Set powered on - Success - done

Set powered on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 1 - setup Set powered on - Invalid parameters 1 - setup complete Set powered on - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 1 - test passed Set powered on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 1 - teardown complete Set powered on - Invalid parameters 1 - done

Set powered on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 2 - setup Set powered on - Invalid parameters 2 - setup complete Set powered on - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 2 - test passed Set powered on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 2 - teardown complete Set powered on - Invalid parameters 2 - done

Set powered on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 3 - setup Set powered on - Invalid parameters 3 - setup complete Set powered on - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 3 - test passed Set powered on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 3 - teardown complete Set powered on - Invalid parameters 3 - done

Set powered on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid index - setup
Set powered on - Invalid index - setup complete
Set powered on - Invalid index - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Index (0x11)
Test condition complete, 0 left
Set powered on - Invalid index - test passed
Set powered on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid index - teardown complete Set powered on - Invalid index - done

Set powered on - Privacy and Advertising - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Privacy and Advertising - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered on - Privacy and Advertising - setup complete Set powered on - Privacy and Advertising - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Success (0x00)
Test condition complete, 0 left
Set powered on - Privacy and Advertising - test passed Set powered on - Privacy and Advertising - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Privacy and Advertising - teardown complete Set powered on - Privacy and Advertising - done

Set powered off - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Success - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Success - setup complete
Set powered off - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered off - Success - test passed
Set powered off - Success - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Success - teardown complete
Set powered off - Success - done

Set powered off - Class of Device - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Class of Device - setup
Setting device class and powering on Controller powered on
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set powered off - Class of Device - setup complete Set powered off - Class of Device - run
Registering new settings notification Test condition added, total 1 Registering Class of Device Changed notification Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
Set Powered (0x0005): Success (0x00) Test condition complete, 2 left
New Class of Device Changed event received Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set powered off - Class of Device - test passed Set powered off - Class of Device - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Class of Device - teardown complete Set powered off - Class of Device - done

Set powered off - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Invalid parameters 1 - setup complete Set powered off - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 1 - test passed Set powered off - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 1 - teardown complete Set powered off - Invalid parameters 1 - done

Set powered off - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Invalid parameters 2 - setup complete Set powered off - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 2 - test passed Set powered off - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 2 - teardown complete Set powered off - Invalid parameters 2 - done

Set powered off - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Invalid parameters 3 - setup complete Set powered off - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 3 - test passed Set powered off - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 3 - teardown complete Set powered off - Invalid parameters 3 - done

Set connectable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Success 1 - setup
Set connectable on - Success 1 - setup complete
Set connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000082 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 1 - test passed
Set connectable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Success 1 - teardown complete Set connectable on - Success 1 - done

Set connectable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable on - Success 2 - setup complete
Set connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000083 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 2 - test passed
Set connectable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on - Success 2 - teardown complete Set connectable on - Success 2 - done

Set connectable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 1 - setup Set connectable on - Invalid parameters 1 - setup complete Set connectable on - Invalid parameters 1 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 1 - test passed Set connectable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 1 - teardown complete Set connectable on - Invalid parameters 1 - done

Set connectable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 2 - setup Set connectable on - Invalid parameters 2 - setup complete Set connectable on - Invalid parameters 2 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 2 - test passed Set connectable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 2 - teardown complete Set connectable on - Invalid parameters 2 - done

Set connectable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 3 - setup Set connectable on - Invalid parameters 3 - setup complete Set connectable on - Invalid parameters 3 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 3 - test passed Set connectable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 3 - teardown complete Set connectable on - Invalid parameters 3 - done

Set connectable on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid index - setup Set connectable on - Invalid index - setup complete Set connectable on - Invalid index - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Index (0x11) Test condition complete, 0 left
Set connectable on - Invalid index - test passed Set connectable on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid index - teardown complete Set connectable on - Invalid index - done

Set connectable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 1 - setup Set connectable on (LE) - Success 1 - setup complete Set connectable on (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000202 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 1 - test passed Set connectable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 1 - teardown complete Set connectable on (LE) - Success 1 - done

Set connectable on (LE) - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set connectable on (LE) - Success 2 - setup complete Set connectable on (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000203 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 2 - test passed Set connectable on (LE) - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 2 - teardown complete Set connectable on (LE) - Success 2 - done

Set connectable on (LE) - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set connectable on (LE) - Success 3 - setup complete Set connectable on (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000603 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 3 - test passed Set connectable on (LE) - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 3 - teardown complete Set connectable on (LE) - Success 3 - done

Set connectable off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 1 - setup complete
Set connectable off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 1 - test passed
Set connectable off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable off - Success 1 - teardown complete Set connectable off - Success 1 - done

Set connectable off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 2 - setup complete
Set connectable off - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 2 - test passed
Set connectable off - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 2 - teardown complete Set connectable off - Success 2 - done

Set connectable off - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 3 - setup complete
Set connectable off - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 3 - test passed
Set connectable off - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 3 - teardown complete Set connectable off - Success 3 - done

Set connectable off - Success 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 4 - setup
Initial settings completed
Powering on controller (with added device)
Controller powered on
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 4 - setup complete
Set connectable off - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 4 - test passed
Set connectable off - Success 4 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 4 - teardown complete Set connectable off - Success 4 - done

Set connectable off (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 1 - setup complete Set connectable off (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000200 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 1 - test passed Set connectable off (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 1 - teardown complete Set connectable off (LE) - Success 1 - done

Set connectable off (LE) - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 2 - setup complete Set connectable off (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 2 - test passed Set connectable off (LE) - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 2 - teardown complete Set connectable off (LE) - Success 2 - done

Set connectable off (LE) - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 3 - setup complete Set connectable off (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 3 - test passed Set connectable off (LE) - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 3 - teardown complete Set connectable off (LE) - Success 3 - done

Set connectable off (LE) - Success 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 4 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 4 - setup complete Set connectable off (LE) - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 4 - test passed Set connectable off (LE) - Success 4 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 4 - teardown complete Set connectable off (LE) - Success 4 - done

Set fast connectable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set fast connectable on - Success 1 - setup complete Set fast connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000087 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 1 - test passed Set fast connectable on - Success 1 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 1 - teardown complete Set fast connectable on - Success 1 - done

Set fast connectable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set fast connectable on - Success 2 - setup complete Set fast connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000085 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 2 - test passed Set fast connectable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 2 - teardown complete Set fast connectable on - Success 2 - done

Set fast connectable on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 3 - setup Set fast connectable on - Success 3 - setup complete Set fast connectable on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000084 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 3 - test passed Set fast connectable on - Success 3 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 3 - teardown complete Set fast connectable on - Success 3 - done

Set fast connectable on - Invalid Params 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Invalid Params 1 - setup Set fast connectable on - Invalid Params 1 - setup complete Set fast connectable on - Invalid Params 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Invalid Parameters (0x0d) Test condition complete, 0 left
Set fast connectable on - Invalid Params 1 - test passed Set fast connectable on - Invalid Params 1 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Invalid Params 1 - teardown complete Set fast connectable on - Invalid Params 1 - done

Set fast connectable on - Not Supported 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Not Supported 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set fast connectable on - Not Supported 1 - setup complete Set fast connectable on - Not Supported 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Not Supported (0x0c) Test condition complete, 0 left
Set fast connectable on - Not Supported 1 - test passed Set fast connectable on - Not Supported 1 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Not Supported 1 - teardown complete Set fast connectable on - Not Supported 1 - done

Set bondable on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Success - setup
Set bondable on - Success - setup complete
Set bondable on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Bondable (0x0009)
Test condition added, total 2
Set Bondable (0x0009): Success (0x00)
Test condition complete, 1 left
New settings 0x00000090 received
Unregistering new settings notification
Test condition complete, 0 left
Set bondable on - Success - test passed
Set bondable on - Success - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Success - teardown complete
Set bondable on - Success - done

Set bondable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 1 - setup Set bondable on - Invalid parameters 1 - setup complete Set bondable on - Invalid parameters 1 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 1 - test passed Set bondable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 1 - teardown complete Set bondable on - Invalid parameters 1 - done

Set bondable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 2 - setup Set bondable on - Invalid parameters 2 - setup complete Set bondable on - Invalid parameters 2 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 2 - test passed Set bondable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 2 - teardown complete Set bondable on - Invalid parameters 2 - done

Set bondable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 3 - setup Set bondable on - Invalid parameters 3 - setup complete Set bondable on - Invalid parameters 3 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 3 - test passed Set bondable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 3 - teardown complete Set bondable on - Invalid parameters 3 - done

Set bondable on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid index - setup
Set bondable on - Invalid index - setup complete
Set bondable on - Invalid index - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Index (0x11)
Test condition complete, 0 left
Set bondable on - Invalid index - test passed
Set bondable on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid index - teardown complete Set bondable on - Invalid index - done

Set discoverable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 1 - setup Set discoverable on - Invalid parameters 1 - setup complete Set discoverable on - Invalid parameters 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 1 - test passed Set discoverable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 1 - teardown complete Set discoverable on - Invalid parameters 1 - done

Set discoverable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 2 - setup Set discoverable on - Invalid parameters 2 - setup complete Set discoverable on - Invalid parameters 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 2 - test passed Set discoverable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 2 - teardown complete Set discoverable on - Invalid parameters 2 - done

Set discoverable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 3 - setup Set discoverable on - Invalid parameters 3 - setup complete Set discoverable on - Invalid parameters 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 3 - test passed Set discoverable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 3 - teardown complete Set discoverable on - Invalid parameters 3 - done

Set discoverable on - Invalid parameters 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 4 - setup Set discoverable on - Invalid parameters 4 - setup complete Set discoverable on - Invalid parameters 4 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 4 - test passed Set discoverable on - Invalid parameters 4 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 4 - teardown complete Set discoverable on - Invalid parameters 4 - done

Set discoverable on - Not powered 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Not powered 1 - setup Set discoverable on - Not powered 1 - setup complete Set discoverable on - Not powered 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 1 - test passed Set discoverable on - Not powered 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Not powered 1 - teardown complete Set discoverable on - Not powered 1 - done

Set discoverable on - Not powered 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Not powered 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set discoverable on - Not powered 2 - setup complete Set discoverable on - Not powered 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 2 - test passed Set discoverable on - Not powered 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Not powered 2 - teardown complete Set discoverable on - Not powered 2 - done

Set discoverable on - Rejected 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Rejected 1 - setup complete
Set discoverable on - Rejected 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 1 - test passed
Set discoverable on - Rejected 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 1 - teardown complete Set discoverable on - Rejected 1 - done

Set discoverable on - Rejected 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Rejected 2 - setup complete
Set discoverable on - Rejected 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 2 - test passed
Set discoverable on - Rejected 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 2 - teardown complete Set discoverable on - Rejected 2 - done

Set discoverable on - Rejected 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Rejected 3 - setup complete
Set discoverable on - Rejected 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 3 - test passed
Set discoverable on - Rejected 3 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 3 - teardown complete Set discoverable on - Rejected 3 - done

Set discoverable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Success 1 - setup complete
Set discoverable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008a received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 1 - test passed
Set discoverable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Success 1 - teardown complete Set discoverable on - Success 1 - done

Set discoverable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Success 2 - setup complete
Set discoverable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Discoverable (0x0006)
Test condition added, total 3
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008b received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 2 - test passed
Set discoverable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set discoverable on - Success 2 - teardown complete Set discoverable on - Success 2 - done

Set discoverable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on (LE) - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on (LE) - Success 1 - setup complete Set discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set discoverable on (LE) - Success 1 - test passed Set discoverable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on (LE) - Success 1 - teardown complete Set discoverable on (LE) - Success 1 - done

Set discoverable off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable off - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable off - Success 1 - setup complete
Set discoverable off - Success 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 1 - test passed
Set discoverable off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable off - Success 1 - teardown complete Set discoverable off - Success 1 - done

Set discoverable off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable off - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable off - Success 2 - setup complete
Set discoverable off - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c1a length 1
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 2 - test passed
Set discoverable off - Success 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable off - Success 2 - teardown complete Set discoverable off - Success 2 - done

Set limited discoverable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on - Success 1 - setup complete Set limited discoverable on - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 1 left
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 1 - test passed Set limited discoverable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 1 - teardown complete Set limited discoverable on - Success 1 - done

Set limited discoverable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on - Success 2 - setup complete Set limited discoverable on - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
Test condition complete, 1 left
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 2 - test passed Set limited discoverable on - Success 2 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 2 - teardown complete Set limited discoverable on - Success 2 - done

Set limited discoverable on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on - Success 3 - setup complete Set limited discoverable on - Success 3 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 3 - test passed Set limited discoverable on - Success 3 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 3 - teardown complete Set limited discoverable on - Success 3 - done

Set limited discoverable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on (LE) - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on (LE) - Success 1 - setup complete Set limited discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set limited discoverable on (LE) - Success 1 - test passed Set limited discoverable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on (LE) - Success 1 - teardown complete Set limited discoverable on (LE) - Success 1 - done

Set link security on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 1 - setup
Set link security on - Success 1 - setup complete
Set link security on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a0 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 1 - test passed
Set link security on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Success 1 - teardown complete Set link security on - Success 1 - done

Set link security on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set link security on - Success 2 - setup complete
Set link security on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 2 - test passed
Set link security on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security on - Success 2 - teardown complete Set link security on - Success 2 - done

Set link security on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set link security on - Success 3 - setup complete
Set link security on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 3 - test passed
Set link security on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security on - Success 3 - teardown complete Set link security on - Success 3 - done

Set link security on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 1 - setup Set link security on - Invalid parameters 1 - setup complete Set link security on - Invalid parameters 1 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 1 - test passed Set link security on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 1 - teardown complete Set link security on - Invalid parameters 1 - done

Set link security on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 2 - setup Set link security on - Invalid parameters 2 - setup complete Set link security on - Invalid parameters 2 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 2 - test passed Set link security on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 2 - teardown complete Set link security on - Invalid parameters 2 - done

Set link security on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 3 - setup Set link security on - Invalid parameters 3 - setup complete Set link security on - Invalid parameters 3 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 3 - test passed Set link security on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 3 - teardown complete Set link security on - Invalid parameters 3 - done

Set link security on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid index - setup Set link security on - Invalid index - setup complete Set link security on - Invalid index - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Index (0x11) Test condition complete, 0 left
Set link security on - Invalid index - test passed Set link security on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid index - teardown complete Set link security on - Invalid index - done

Set link security off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security off - Success 1 - setup
Initial settings completed
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set link security off - Success 1 - setup complete Set link security off - Success 1 - run
Registering new settings notification Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 1 - test passed Set link security off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security off - Success 1 - teardown complete Set link security off - Success 1 - done

Set link security off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security off - Success 2 - setup
Initial settings completed
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set link security off - Success 2 - setup complete Set link security off - Success 2 - run
Registering new settings notification Test condition added, total 1 Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000081 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 2 - test passed Set link security off - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security off - Success 2 - teardown complete Set link security off - Success 2 - done

Set SSP on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 1 - setup
Set SSP on - Success 1 - setup complete
Set SSP on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 2
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c0 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 1 - test passed
Set SSP on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Success 1 - teardown complete
Set SSP on - Success 1 - done

Set SSP on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set SSP on - Success 2 - setup complete
Set SSP on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c1 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 2 - test passed
HCI Command 0x0c52 length 241
Set SSP on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set SSP on - Success 2 - teardown complete
Set SSP on - Success 2 - done

Set SSP on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set SSP on - Success 3 - setup complete
Set SSP on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
HCI Command 0x0c52 length 241
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set SSP on - Success 3 - test passed
Set SSP on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set SSP on - Success 3 - teardown complete
Set SSP on - Success 3 - done

Set SSP on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 1 - setup
Set SSP on - Invalid parameters 1 - setup complete Set SSP on - Invalid parameters 1 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 1 - test passed
Set SSP on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 1 - teardown complete Set SSP on - Invalid parameters 1 - done

Set SSP on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 2 - setup
Set SSP on - Invalid parameters 2 - setup complete Set SSP on - Invalid parameters 2 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 2 - test passed
Set SSP on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 2 - teardown complete Set SSP on - Invalid parameters 2 - done

Set SSP on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 3 - setup
Set SSP on - Invalid parameters 3 - setup complete Set SSP on - Invalid parameters 3 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 3 - test passed
Set SSP on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 3 - teardown complete Set SSP on - Invalid parameters 3 - done

Set SSP on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid index - setup
Set SSP on - Invalid index - setup complete
Set SSP on - Invalid index - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Index (0x11) Test condition complete, 0 left
Set SSP on - Invalid index - test passed
Set SSP on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid index - teardown complete
Set SSP on - Invalid index - done

Set Secure Connections on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Success 1 - setup complete Set Secure Connections on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d) Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 1 - test passed Set Secure Connections on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Success 1 - teardown complete Set Secure Connections on - Success 1 - done

Set Secure Connections on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Success 2 - setup complete Set Secure Connections on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d) Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 2 - test passed Set Secure Connections on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Success 2 - teardown complete Set Secure Connections on - Success 2 - done

Set Secure Connections on - Invalid params 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid params 1 - setup complete Set Secure Connections on - Invalid params 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 1 - test passed Set Secure Connections on - Invalid params 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 1 - teardown complete Set Secure Connections on - Invalid params 1 - done

Set Secure Connections on - Invalid params 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid params 2 - setup complete Set Secure Connections on - Invalid params 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 2 - test passed Set Secure Connections on - Invalid params 2 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 2 - teardown complete Set Secure Connections on - Invalid params 2 - done

Set Secure Connections on - Invalid params 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid params 3 - setup complete Set Secure Connections on - Invalid params 3 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 3 - test passed Set Secure Connections on - Invalid params 3 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 3 - teardown complete Set Secure Connections on - Invalid params 3 - done

Set Secure Connections on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid index - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid index - setup complete Set Secure Connections on - Invalid index - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Index (0x11) Test condition complete, 0 left
Set Secure Connections on - Invalid index - test passed Set Secure Connections on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid index - teardown complete Set Secure Connections on - Invalid index - done

Set Secure Connections on - Not supported 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Not supported 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Not supported 1 - setup complete Set Secure Connections on - Not supported 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 1 - test passed Set Secure Connections on - Not supported 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Not supported 1 - teardown complete Set Secure Connections on - Not supported 1 - done

Set Secure Connections on - Not supported 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000111ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Not supported 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Not supported 2 - setup complete Set Secure Connections on - Not supported 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 2 - test passed Set Secure Connections on - Not supported 2 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Not supported 2 - teardown complete Set Secure Connections on - Not supported 2 - done

Set Secure Connections Only on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections Only on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections Only on - Success 1 - setup complete Set Secure Connections Only on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d)
Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 1 - test passed Set Secure Connections Only on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections Only on - Success 1 - teardown complete Set Secure Connections Only on - Success 1 - done

Set Secure Connections Only on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections Only on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections Only on - Success 2 - setup complete Set Secure Connections Only on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d)
Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 2 - test passed Set Secure Connections Only on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Secure Connections Only on - Success 2 - teardown complete Set Secure Connections Only on - Success 2 - done

Set High Speed on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set High Speed on - Success - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Success - setup complete
Set High Speed on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set High Speed (0x000c)
Test condition added, total 2
Set High Speed (0x000c): Success (0x00)
Test condition complete, 1 left
New settings 0x000001c0 received
Unregistering new settings notification
Test condition complete, 0 left
Set High Speed on - Success - test passed
Set High Speed on - Success - teardown
Index Removed callback

    Index: 0x0000

Set High Speed on - Success - teardown complete
Set High Speed on - Success - done

Set High Speed on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set High Speed on - Invalid parameters 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Invalid parameters 1 - setup complete Set High Speed on - Invalid parameters 1 - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Parameters (0x0d) Test condition complete, 0 left
Set High Speed on - Invalid parameters 1 - test passed Set High Speed on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 1 - teardown complete Set High Speed on - Invalid parameters 1 - done

Set High Speed on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set High Speed on - Invalid parameters 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Invalid parameters 2 - setup complete Set High Speed on - Invalid parameters 2 - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Parameters (0x0d) Test condition complete, 0 left
Set High Speed on - Invalid parameters 2 - test passed Set High Speed on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 2 - teardown complete Set High Speed on - Invalid parameters 2 - done

Set High Speed on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set High Speed on - Invalid parameters 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Invalid parameters 3 - setup complete Set High Speed on - Invalid parameters 3 - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Parameters (0x0d) Test condition complete, 0 left
Set High Speed on - Invalid parameters 3 - test passed Set High Speed on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 3 - teardown complete Set High Speed on - Invalid parameters 3 - done

Set High Speed on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set High Speed on - Invalid index - setup
Initial settings completed
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set High Speed on - Invalid index - setup complete Set High Speed on - Invalid index - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Index (0x11) Test condition complete, 0 left
Set High Speed on - Invalid index - test passed Set High Speed on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid index - teardown complete Set High Speed on - Invalid index - done

Set Low Energy on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 1 - setup
Set Low Energy on - Success 1 - setup complete
Set Low Energy on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Low Energy (0x000d)
Test condition added, total 2
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 1 - test passed
Set Low Energy on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 1 - teardown complete
Set Low Energy on - Success 1 - done

Set Low Energy on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Low Energy on - Success 2 - setup complete
Set Low Energy on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Low Energy (0x000d)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 2 - test passed
HCI Command 0x2008 length 32
Set Low Energy on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 2 - teardown complete
Set Low Energy on - Success 2 - done

Set Low Energy on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Low Energy on - Success 3 - setup complete
Set Low Energy on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
HCI Command 0x2008 length 32
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 3 - test passed
Set Low Energy on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 3 - teardown complete
Set Low Energy on - Success 3 - done

Set Low Energy on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 1 - setup Set Low Energy on - Invalid parameters 1 - setup complete Set Low Energy on - Invalid parameters 1 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 1 - test passed Set Low Energy on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 1 - teardown complete Set Low Energy on - Invalid parameters 1 - done

Set Low Energy on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 2 - setup Set Low Energy on - Invalid parameters 2 - setup complete Set Low Energy on - Invalid parameters 2 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 2 - test passed Set Low Energy on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 2 - teardown complete Set Low Energy on - Invalid parameters 2 - done

Set Low Energy on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 3 - setup Set Low Energy on - Invalid parameters 3 - setup complete Set Low Energy on - Invalid parameters 3 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 3 - test passed Set Low Energy on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 3 - teardown complete Set Low Energy on - Invalid parameters 3 - done

Set Low Energy on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid index - setup Set Low Energy on - Invalid index - setup complete Set Low Energy on - Invalid index - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Index (0x11) Test condition complete, 0 left
Set Low Energy on - Invalid index - test passed Set Low Energy on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid index - teardown complete Set Low Energy on - Invalid index - done

Set Advertising on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Advertising on - Success 1 - setup complete
Set Advertising on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
Set Advertising (0x0029): Success (0x00)
Test condition complete, 1 left
New settings 0x00000680 received
Unregistering new settings notification
Test condition complete, 0 left
Set Advertising on - Success 1 - test passed
Set Advertising on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Success 1 - teardown complete Set Advertising on - Success 1 - done

Set Advertising on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Advertising on - Success 2 - setup complete
Set Advertising on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Advertising (0x0029)
Test condition added, total 3
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Test condition complete, 2 left
Set Advertising (0x0029): Success (0x00)
Test condition complete, 1 left
New settings 0x00000681 received
Unregistering new settings notification
Test condition complete, 0 left
Set Advertising on - Success 2 - test passed
Set Advertising on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Advertising on - Success 2 - teardown complete Set Advertising on - Success 2 - done

Set Advertising on - Rejected 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Rejected 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Advertising on - Rejected 1 - setup complete
Set Advertising on - Rejected 1 - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Rejected (0x0b)
Test condition complete, 0 left
Set Advertising on - Rejected 1 - test passed
Set Advertising on - Rejected 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Rejected 1 - teardown complete Set Advertising on - Rejected 1 - done

Set Advertising on - Appearance 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.21
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

15,178 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#3 lore raw

PATCH v7 2/12 Bluetooth: btintel: Add combined setup and shutdown functions

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

There are multiple setup and shutdown functions for Intel device and the setup function to be used is depends on the USB PID/VID, which makes difficult to maintain the code and increases the code size.

This patch adds combined setup and shutdown functions to provide a single entry point for all Intel devices and choose the setup functions based on the information read with HCI_Intel_Read_Version command.

Starting from TyP device, the command and response parameters for HCI_Intel_Read_Version command are changed even though OCF remains same. However, the legacy devices still can handle the command without error even if it has a extra parameter, so to simplify the flow, the new command format is used to read the version information for both legacy and new (tlv based) format.

Also, it also adds a routine to setup the hdev callbacks in btintel.

---
 drivers/bluetooth/btintel.c | 235 ++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/btintel.h |   6 +
 2 files changed, 241 insertions(+)
drivers/bluetooth/btintel.c +235 -0
index e44b6993cf91..2fac6babb4b1 100644
@@ -236,6 +236,8 @@ int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
 	 * compatibility options when newer hardware variants come along.
 	 */
 	switch (ver->hw_variant) {
+	case 0x07:	/* WP - Legacy ROM */
+	case 0x08:	/* StP - Legacy ROM */
 	case 0x0b:      /* SfP */
 	case 0x0c:      /* WsP */
 	case 0x11:      /* JfP */
@@ -250,9 +252,15 @@ int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
 	}
 
 	switch (ver->fw_variant) {
+	case 0x01:
+		variant = "Legacy ROM 2.5";
+		break;
 	case 0x06:
 		variant = "Bootloader";
 		break;
+	case 0x22:
+		variant = "Legacy ROM 2.x";
+		break;
 	case 0x23:
 		variant = "Firmware";
 		break;
@@ -483,6 +491,108 @@ int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 }
 EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
 
+static int btintel_parse_version_tlv(struct hci_dev *hdev,
+				     struct intel_version_tlv *version,
+				     struct sk_buff *skb)
+{
+	/* Consume Command Complete Status field */
+	skb_pull(skb, 1);
+
+	/* Event parameters contatin multiple TLVs. Read each of them
+	 * and only keep the required data. Also, it use existing legacy
+	 * version field like hw_platform, hw_variant, and fw_variant
+	 * to keep the existing setup flow
+	 */
+	while (skb->len) {
+		struct intel_tlv *tlv;
+
+		/* Make sure skb has a minimum length of the header */
+		if (skb->len < sizeof(*tlv))
+			return -EINVAL;
+
+		tlv = (struct intel_tlv *)skb->data;
+
+		/* Make sure skb has a enough data */
+		if (skb->len < tlv->len + sizeof(*tlv))
+			return -EINVAL;
+
+		switch (tlv->type) {
+		case INTEL_TLV_CNVI_TOP:
+			version->cnvi_top = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_CNVR_TOP:
+			version->cnvr_top = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_CNVI_BT:
+			version->cnvi_bt = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_CNVR_BT:
+			version->cnvr_bt = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_DEV_REV_ID:
+			version->dev_rev_id = get_unaligned_le16(tlv->val);
+			break;
+		case INTEL_TLV_IMAGE_TYPE:
+			version->img_type = tlv->val[0];
+			break;
+		case INTEL_TLV_TIME_STAMP:
+			/* If image type is Operational firmware (0x03), then
+			 * running FW Calendar Week and Year information can
+			 * be extracted from Timestamp information
+			 */
+			version->min_fw_build_cw = tlv->val[0];
+			version->min_fw_build_yy = tlv->val[1];
+			version->timestamp = get_unaligned_le16(tlv->val);
+			break;
+		case INTEL_TLV_BUILD_TYPE:
+			version->build_type = tlv->val[0];
+			break;
+		case INTEL_TLV_BUILD_NUM:
+			/* If image type is Operational firmware (0x03), then
+			 * running FW build number can be extracted from the
+			 * Build information
+			 */
+			version->min_fw_build_nn = tlv->val[0];
+			version->build_num = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_SECURE_BOOT:
+			version->secure_boot = tlv->val[0];
+			break;
+		case INTEL_TLV_OTP_LOCK:
+			version->otp_lock = tlv->val[0];
+			break;
+		case INTEL_TLV_API_LOCK:
+			version->api_lock = tlv->val[0];
+			break;
+		case INTEL_TLV_DEBUG_LOCK:
+			version->debug_lock = tlv->val[0];
+			break;
+		case INTEL_TLV_MIN_FW:
+			version->min_fw_build_nn = tlv->val[0];
+			version->min_fw_build_cw = tlv->val[1];
+			version->min_fw_build_yy = tlv->val[2];
+			break;
+		case INTEL_TLV_LIMITED_CCE:
+			version->limited_cce = tlv->val[0];
+			break;
+		case INTEL_TLV_SBE_TYPE:
+			version->sbe_type = tlv->val[0];
+			break;
+		case INTEL_TLV_OTP_BDADDR:
+			memcpy(&version->otp_bd_addr, tlv->val,
+							sizeof(bdaddr_t));
+			break;
+		default:
+			/* Ignore rest of information */
+			break;
+		}
+		/* consume the current tlv and move to next*/
+		skb_pull(skb, tlv->len + sizeof(*tlv));
+	}
+
+	return 0;
+}
+
 int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
 {
 	struct sk_buff *skb;
@@ -1272,6 +1382,131 @@ int btintel_set_debug_features(struct hci_dev *hdev,
 }
 EXPORT_SYMBOL_GPL(btintel_set_debug_features);
 
+static int btintel_setup_combined(struct hci_dev *hdev)
+{
+	const u8 param[1] = { 0xFF };
+	struct intel_version ver;
+	struct intel_version_tlv ver_tlv;
+	struct sk_buff *skb;
+	int err;
+
+	BT_DBG("%s", hdev->name);
+
+	/* Starting from TyP device, the command parameter and response are
+	 * changed even though the OCF for HCI_Intel_Read_Version command
+	 * remains same. The legacy devices can handle even if the
+	 * command has a parameter and returns a correct version information.
+	 * So, it uses new format to support both legacy and new format.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading Intel version command failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	/* Check the status */
+	if (skb->data[0]) {
+		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+			   skb->data[0]);
+		err = -EIO;
+		goto exit_error;
+	}
+
+	/* For Legacy device, check the HW platform value and size */
+	if (skb->len == sizeof(ver) && skb->data[1] == 0x37) {
+		bt_dev_dbg(hdev, "Read the legacy Intel version information");
+
+		memcpy(&ver, skb->data, sizeof(ver));
+
+		/* Display version information */
+		btintel_version_info(hdev, &ver);
+
+		/* Check for supported iBT hardware variants of this firmware
+		 * loading method.
+		 *
+		 * This check has been put in place to ensure correct forward
+		 * compatibility options when newer hardware variants come
+		 * along.
+		 */
+		switch (ver.hw_variant) {
+		case 0x07:	/* WP */
+		case 0x08:	/* StP */
+			/* Legacy ROM product */
+			/* TODO: call setup routine for legacy rom product */
+			break;
+		case 0x0b:      /* SfP */
+		case 0x0c:      /* WsP */
+		case 0x11:      /* JfP */
+		case 0x12:      /* ThP */
+		case 0x13:      /* HrP */
+		case 0x14:      /* CcP */
+			/* TODO: call setup routine for bootloader product */
+			break;
+		default:
+			bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
+				   ver.hw_variant);
+			err = -EINVAL;
+		}
+
+		goto exit_error;
+	}
+
+	/* For TLV type device, parse the tlv data */
+	err = btintel_parse_version_tlv(hdev, &ver_tlv, skb);
+	if (err) {
+		bt_dev_err(hdev, "Failed to parse TLV version information");
+		goto exit_error;
+	}
+
+	if (INTEL_HW_PLATFORM(ver_tlv.cnvi_bt) != 0x37) {
+		bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
+			   INTEL_HW_PLATFORM(ver_tlv.cnvi_bt));
+		err = -EINVAL;
+		goto exit_error;
+	}
+
+	/* Display version information of TLV type */
+	btintel_version_info_tlv(hdev, &ver_tlv);
+
+	/* TODO: Need to filter the device for new generation */
+	/* TODO: call setup routine for tlv based bootloader product */
+
+exit_error:
+	kfree_skb(skb);
+
+	return err;
+}
+
+static int btintel_shutdown_combined(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Send HCI Reset to the controller to stop any BT activity which
+	 * were triggered. This will help to save power and maintain the
+	 * sync b/w Host and controller
+	 */
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "HCI reset during shutdown failed");
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+int btintel_configure_setup(struct hci_dev *hdev)
+{
+	/* TODO: Setup hdev callback here */
+	hdev->manufacturer = 2;
+	hdev->setup = btintel_setup_combined;
+	hdev->shutdown = btintel_shutdown_combined;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_configure_setup);
+
 MODULE_AUTHOR("Marcel Holtmann <[email protected]>");
 MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
 MODULE_VERSION(VERSION);
drivers/bluetooth/btintel.h +6 -0
index d184064a5e7c..dda890d94a07 100644
@@ -175,6 +175,7 @@ int btintel_read_debug_features(struct hci_dev *hdev,
 				struct intel_debug_features *features);
 int btintel_set_debug_features(struct hci_dev *hdev,
 			       const struct intel_debug_features *features);
+int btintel_configure_setup(struct hci_dev *hdev);
 #else
 
 static inline int btintel_check_bdaddr(struct hci_dev *hdev)
@@ -307,4 +308,9 @@ static inline int btintel_set_debug_features(struct hci_dev *hdev,
 	return -EOPNOTSUPP;
 }
 
+static inline int btintel_configure_setup(struct hci_dev *hdev)
+{
+	return -ENODEV;
+}
+
 #endif
Signature · 1 line
2.25.1
#4 lore raw

PATCH v7 3/12 Bluetooth: btintel: Refactoring setup routine for legacy ROM sku

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

This patch refactors the setup routines for legacy ROM product into combined setup, and move the related functions from btusb to btintel.

---
 drivers/bluetooth/btintel.c | 293 +++++++++++++++++++++++++++-
 drivers/bluetooth/btintel.h |   6 -
 drivers/bluetooth/btusb.c   | 370 ++----------------------------------
 3 files changed, 301 insertions(+), 368 deletions(-)
drivers/bluetooth/btintel.c +289 -4
index 2fac6babb4b1..a6d75afad71b 100644
@@ -164,7 +164,7 @@ int btintel_set_diag(struct hci_dev *hdev, bool enable)
 }
 EXPORT_SYMBOL_GPL(btintel_set_diag);
 
-int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
+static int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
 {
 	int err, ret;
 
@@ -180,7 +180,6 @@ int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(btintel_set_diag_mfg);
 
 void btintel_hw_error(struct hci_dev *hdev, u8 code)
 {
@@ -1382,6 +1381,291 @@ int btintel_set_debug_features(struct hci_dev *hdev,
 }
 EXPORT_SYMBOL_GPL(btintel_set_debug_features);
 
+static const struct firmware *btintel_legacy_rom_get_fw(struct hci_dev *hdev,
+					       struct intel_version *ver)
+{
+	const struct firmware *fw;
+	char fwname[64];
+	int ret;
+
+	snprintf(fwname, sizeof(fwname),
+		 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
+		 ver->hw_platform, ver->hw_variant, ver->hw_revision,
+		 ver->fw_variant,  ver->fw_revision, ver->fw_build_num,
+		 ver->fw_build_ww, ver->fw_build_yy);
+
+	ret = request_firmware(&fw, fwname, &hdev->dev);
+	if (ret < 0) {
+		if (ret == -EINVAL) {
+			bt_dev_err(hdev, "Intel firmware file request failed (%d)",
+				   ret);
+			return NULL;
+		}
+
+		bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)",
+			   fwname, ret);
+
+		/* If the correct firmware patch file is not found, use the
+		 * default firmware patch file instead
+		 */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
+			 ver->hw_platform, ver->hw_variant);
+		if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
+			bt_dev_err(hdev, "failed to open default fw file: %s",
+				   fwname);
+			return NULL;
+		}
+	}
+
+	bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname);
+
+	return fw;
+}
+
+static int btintel_legacy_rom_patching(struct hci_dev *hdev,
+				      const struct firmware *fw,
+				      const u8 **fw_ptr, int *disable_patch)
+{
+	struct sk_buff *skb;
+	struct hci_command_hdr *cmd;
+	const u8 *cmd_param;
+	struct hci_event_hdr *evt = NULL;
+	const u8 *evt_param = NULL;
+	int remain = fw->size - (*fw_ptr - fw->data);
+
+	/* The first byte indicates the types of the patch command or event.
+	 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
+	 * in the current firmware buffer doesn't start with 0x01 or
+	 * the size of remain buffer is smaller than HCI command header,
+	 * the firmware file is corrupted and it should stop the patching
+	 * process.
+	 */
+	if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
+		bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read");
+		return -EINVAL;
+	}
+	(*fw_ptr)++;
+	remain--;
+
+	cmd = (struct hci_command_hdr *)(*fw_ptr);
+	*fw_ptr += sizeof(*cmd);
+	remain -= sizeof(*cmd);
+
+	/* Ensure that the remain firmware data is long enough than the length
+	 * of command parameter. If not, the firmware file is corrupted.
+	 */
+	if (remain < cmd->plen) {
+		bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len");
+		return -EFAULT;
+	}
+
+	/* If there is a command that loads a patch in the firmware
+	 * file, then enable the patch upon success, otherwise just
+	 * disable the manufacturer mode, for example patch activation
+	 * is not required when the default firmware patch file is used
+	 * because there are no patch data to load.
+	 */
+	if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
+		*disable_patch = 0;
+
+	cmd_param = *fw_ptr;
+	*fw_ptr += cmd->plen;
+	remain -= cmd->plen;
+
+	/* This reads the expected events when the above command is sent to the
+	 * device. Some vendor commands expects more than one events, for
+	 * example command status event followed by vendor specific event.
+	 * For this case, it only keeps the last expected event. so the command
+	 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
+	 * last expected event.
+	 */
+	while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
+		(*fw_ptr)++;
+		remain--;
+
+		evt = (struct hci_event_hdr *)(*fw_ptr);
+		*fw_ptr += sizeof(*evt);
+		remain -= sizeof(*evt);
+
+		if (remain < evt->plen) {
+			bt_dev_err(hdev, "Intel fw corrupted: invalid evt len");
+			return -EFAULT;
+		}
+
+		evt_param = *fw_ptr;
+		*fw_ptr += evt->plen;
+		remain -= evt->plen;
+	}
+
+	/* Every HCI commands in the firmware file has its correspond event.
+	 * If event is not found or remain is smaller than zero, the firmware
+	 * file is corrupted.
+	 */
+	if (!evt || !evt_param || remain < 0) {
+		bt_dev_err(hdev, "Intel fw corrupted: invalid evt read");
+		return -EFAULT;
+	}
+
+	skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
+				cmd_param, evt->evt, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)",
+			   cmd->opcode, PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	/* It ensures that the returned event matches the event data read from
+	 * the firmware file. At fist, it checks the length and then
+	 * the contents of the event.
+	 */
+	if (skb->len != evt->plen) {
+		bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)",
+			   le16_to_cpu(cmd->opcode));
+		kfree_skb(skb);
+		return -EFAULT;
+	}
+
+	if (memcmp(skb->data, evt_param, evt->plen)) {
+		bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)",
+			   le16_to_cpu(cmd->opcode));
+		kfree_skb(skb);
+		return -EFAULT;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int btintel_legacy_rom_setup(struct hci_dev *hdev,
+				    struct intel_version *ver)
+{
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	int disable_patch, err;
+	struct intel_version new_ver;
+
+	BT_DBG("%s", hdev->name);
+
+	/* fw_patch_num indicates the version of patch the device currently
+	 * have. If there is no patch data in the device, it is always 0x00.
+	 * So, if it is other than 0x00, no need to patch the device again.
+	 */
+	if (ver->fw_patch_num) {
+		bt_dev_info(hdev,
+			    "Intel device is already patched. patch num: %02x",
+			    ver->fw_patch_num);
+		goto complete;
+	}
+
+	/* Opens the firmware patch file based on the firmware version read
+	 * from the controller. If it fails to open the matching firmware
+	 * patch file, it tries to open the default firmware patch file.
+	 * If no patch file is found, allow the device to operate without
+	 * a patch.
+	 */
+	fw = btintel_legacy_rom_get_fw(hdev, ver);
+	if (!fw)
+		goto complete;
+	fw_ptr = fw->data;
+
+	/* Enable the manufacturer mode of the controller.
+	 * Only while this mode is enabled, the driver can download the
+	 * firmware patch data and configuration parameters.
+	 */
+	err = btintel_enter_mfg(hdev);
+	if (err) {
+		release_firmware(fw);
+		return err;
+	}
+
+	disable_patch = 1;
+
+	/* The firmware data file consists of list of Intel specific HCI
+	 * commands and its expected events. The first byte indicates the
+	 * type of the message, either HCI command or HCI event.
+	 *
+	 * It reads the command and its expected event from the firmware file,
+	 * and send to the controller. Once __hci_cmd_sync_ev() returns,
+	 * the returned event is compared with the event read from the firmware
+	 * file and it will continue until all the messages are downloaded to
+	 * the controller.
+	 *
+	 * Once the firmware patching is completed successfully,
+	 * the manufacturer mode is disabled with reset and activating the
+	 * downloaded patch.
+	 *
+	 * If the firmware patching fails, the manufacturer mode is
+	 * disabled with reset and deactivating the patch.
+	 *
+	 * If the default patch file is used, no reset is done when disabling
+	 * the manufacturer.
+	 */
+	while (fw->size > fw_ptr - fw->data) {
+		int ret;
+
+		ret = btintel_legacy_rom_patching(hdev, fw, &fw_ptr,
+						 &disable_patch);
+		if (ret < 0)
+			goto exit_mfg_deactivate;
+	}
+
+	release_firmware(fw);
+
+	if (disable_patch)
+		goto exit_mfg_disable;
+
+	/* Patching completed successfully and disable the manufacturer mode
+	 * with reset and activate the downloaded firmware patches.
+	 */
+	err = btintel_exit_mfg(hdev, true, true);
+	if (err)
+		return err;
+
+	/* Need build number for downloaded fw patches in
+	 * every power-on boot
+	 */
+	err = btintel_read_version(hdev, &new_ver);
+	if (err)
+		return err;
+
+	bt_dev_info(hdev, "Intel BT fw patch 0x%02x completed & activated",
+		    new_ver.fw_patch_num);
+
+	goto complete;
+
+exit_mfg_disable:
+	/* Disable the manufacturer mode without reset */
+	err = btintel_exit_mfg(hdev, false, false);
+	if (err)
+		return err;
+
+	bt_dev_info(hdev, "Intel firmware patch completed");
+
+	goto complete;
+
+exit_mfg_deactivate:
+	release_firmware(fw);
+
+	/* Patching failed. Disable the manufacturer mode with reset and
+	 * deactivate the downloaded firmware patches.
+	 */
+	err = btintel_exit_mfg(hdev, true, false);
+	if (err)
+		return err;
+
+	bt_dev_info(hdev, "Intel firmware patch completed and deactivated");
+
+complete:
+	/* Set the event mask for Intel specific vendor events. This enables
+	 * a few extra events that are useful during general operation.
+	 */
+	btintel_set_event_mask_mfg(hdev, false);
+
+	btintel_check_bdaddr(hdev);
+
+	return 0;
+}
+
 static int btintel_setup_combined(struct hci_dev *hdev)
 {
 	const u8 param[1] = { 0xFF };
@@ -1433,7 +1717,7 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		case 0x07:	/* WP */
 		case 0x08:	/* StP */
 			/* Legacy ROM product */
-			/* TODO: call setup routine for legacy rom product */
+			err = btintel_legacy_rom_setup(hdev, &ver);
 			break;
 		case 0x0b:      /* SfP */
 		case 0x0c:      /* WsP */
@@ -1498,10 +1782,11 @@ static int btintel_shutdown_combined(struct hci_dev *hdev)
 
 int btintel_configure_setup(struct hci_dev *hdev)
 {
-	/* TODO: Setup hdev callback here */
 	hdev->manufacturer = 2;
 	hdev->setup = btintel_setup_combined;
 	hdev->shutdown = btintel_shutdown_combined;
+	hdev->set_diag = btintel_set_diag_mfg;
+	hdev->set_bdaddr = btintel_set_bdaddr;
 
 	return 0;
 }
drivers/bluetooth/btintel.h +0 -6
index dda890d94a07..2c87fd029ddf 100644
@@ -145,7 +145,6 @@ int btintel_enter_mfg(struct hci_dev *hdev);
 int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched);
 int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int btintel_set_diag(struct hci_dev *hdev, bool enable);
-int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable);
 void btintel_hw_error(struct hci_dev *hdev, u8 code);
 
 int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
@@ -203,11 +202,6 @@ static inline int btintel_set_diag(struct hci_dev *hdev, bool enable)
 	return -EOPNOTSUPP;
 }
 
-static inline int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
-{
-	return -EOPNOTSUPP;
-}
-
 static inline void btintel_hw_error(struct hci_dev *hdev, u8 code)
 {
 }
drivers/bluetooth/btusb.c +12 -358

403 lines not on this page · raw message

Signature · 1 line
2.25.1
#5 lore raw

PATCH v7 4/12 Bluetooth: btintel: Add btintel data struct

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

This patch adds a data structure for btintel for btintel object, and the definition of bootloder states. It also adds macros to set/test/clear the flags.

---
 drivers/bluetooth/btintel.h | 40 +++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/btusb.c   | 11 ++++++++--
 2 files changed, 49 insertions(+), 2 deletions(-)
drivers/bluetooth/btintel.h +40 -0
index 2c87fd029ddf..fb5e73ef71eb 100644
@@ -138,6 +138,46 @@ struct intel_debug_features {
 #define INTEL_CNVX_TOP_STEP(cnvx_top)	(((cnvx_top) & 0x0f000000) >> 24)
 #define INTEL_CNVX_TOP_PACK_SWAB(t, s)	__swab16(((__u16)(((t) << 4) | (s))))
 
+enum {
+	INTEL_BOOTLOADER,
+	INTEL_DOWNLOADING,
+	INTEL_FIRMWARE_LOADED,
+	INTEL_FIRMWARE_FAILED,
+	INTEL_BOOTING,
+
+	__INTEL_NUM_FLAGS,
+};
+
+struct btintel_data {
+	DECLARE_BITMAP(flags, __INTEL_NUM_FLAGS);
+};
+
+#define btintel_set_flag(hdev, nr)					\
+	do {								\
+		struct btintel_data *intel = hci_get_priv((hdev));	\
+		set_bit((nr), intel->flags);				\
+	} while (0)
+
+#define btintel_clear_flag(hdev, nr)					\
+	do {								\
+		struct btintel_data *intel = hci_get_priv((hdev));	\
+		clear_bit((nr), intel->flags);				\
+	} while (0)
+
+#define btintel_wake_up_flag(hdev, nr)					\
+	do {								\
+		struct btintel_data *intel = hci_get_priv((hdev));	\
+		wake_up_bit(intel->flags, (nr));			\
+	} while (0)
+
+#define btintel_get_flag(hdev)						\
+	(((struct btintel_data *)hci_get_priv(hdev))->flags)
+
+#define btintel_test_flag(hdev, nr)	test_bit((nr), btintel_get_flag(hdev))
+#define btintel_test_and_clear_flag(hdev, nr) test_and_clear_bit((nr), btintel_get_flag(hdev))
+#define btintel_wait_on_flag_timeout(hdev, nr, m, to)			\
+		wait_on_bit_timeout(btintel_get_flag(hdev), (nr), m, to)
+
 #if IS_ENABLED(CONFIG_BT_INTEL)
 
 int btintel_check_bdaddr(struct hci_dev *hdev);
drivers/bluetooth/btusb.c +9 -2
index ce05085ff158..887b8839e4b2 100644
@@ -4299,7 +4299,7 @@ static int btusb_probe(struct usb_interface *intf,
 	struct btusb_data *data;
 	struct hci_dev *hdev;
 	unsigned ifnum_base;
-	int i, err;
+	int i, err, priv_size;
 
 	BT_DBG("intf %p id %p", intf, id);
 
@@ -4385,6 +4385,13 @@ static int btusb_probe(struct usb_interface *intf,
 	init_usb_anchor(&data->ctrl_anchor);
 	spin_lock_init(&data->rxlock);
 
+	priv_size = 0;
+
+	if (id->driver_info & BTUSB_INTEL_COMBINED) {
+		/* Allocate extra space for Intel device */
+		priv_size += sizeof(struct btintel_data);
+	}
+
 	if (id->driver_info & BTUSB_INTEL_NEW) {
 		data->recv_event = btusb_recv_event_intel;
 		data->recv_bulk = btusb_recv_bulk_intel;
@@ -4396,7 +4403,7 @@ static int btusb_probe(struct usb_interface *intf,
 
 	data->recv_acl = hci_recv_frame;
 
-	hdev = hci_alloc_dev();
+	hdev = hci_alloc_dev_priv(priv_size);
 	if (!hdev)
 		return -ENOMEM;
 
Signature · 1 line
2.25.1
#6 lore raw

PATCH v7 5/12 Bluetooth: btintel: Fix the first HCI command not work with ROM device

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

The some legacy ROM controllers have a bug with the first HCI command sent to it returning number of completed commands as zero, which would stall the command processing in the Bluetooth core.

As a workaround, send HCI Rest command first which will reset the controller to fix the issue.

---
 drivers/bluetooth/btintel.c | 20 ++++++++++++++++++++
 drivers/bluetooth/btintel.h |  1 +
 drivers/bluetooth/btusb.c   |  7 ++++++-
 3 files changed, 27 insertions(+), 1 deletion(-)
drivers/bluetooth/btintel.c +20 -0
index a6d75afad71b..8e6b497a2164 100644
@@ -1676,6 +1676,26 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	/* The some controllers have a bug with the first HCI command sent to it
+	 * returning number of completed commands as zero. This would stall the
+	 * command processing in the Bluetooth core.
+	 *
+	 * As a workaround, send HCI Reset command first which will reset the
+	 * number of completed commands and allow normal command processing
+	 * from now on.
+	 */
+	if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD)) {
+		skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			bt_dev_err(hdev,
+				   "sending initial HCI reset failed (%ld)",
+				   PTR_ERR(skb));
+			return PTR_ERR(skb);
+		}
+		kfree_skb(skb);
+	}
+
 	/* Starting from TyP device, the command parameter and response are
 	 * changed even though the OCF for HCI_Intel_Read_Version command
 	 * remains same. The legacy devices can handle even if the
drivers/bluetooth/btintel.h +1 -0
index fb5e73ef71eb..8a49795ad5af 100644
@@ -144,6 +144,7 @@ enum {
 	INTEL_FIRMWARE_LOADED,
 	INTEL_FIRMWARE_FAILED,
 	INTEL_BOOTING,
+	INTEL_BROKEN_INITIAL_NCMD,
 
 	__INTEL_NUM_FLAGS,
 };
drivers/bluetooth/btusb.c +6 -1
index 887b8839e4b2..3ed552d80b66 100644
@@ -61,6 +61,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_VALID_LE_STATES   0x800000
 #define BTUSB_QCA_WCN6855	0x1000000
 #define BTUSB_INTEL_NEWGEN	0x2000000
+#define BTUSB_INTEL_BROKEN_INITIAL_NCMD 0x4000000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -372,7 +373,8 @@ static const struct usb_device_id blacklist_table[] = {
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
-	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
+						     BTUSB_INTEL_BROKEN_INITIAL_NCMD },
 	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED },
 	{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW |
 						     BTUSB_WIDEBAND_SPEECH },
@@ -4489,6 +4491,9 @@ static int btusb_probe(struct usb_interface *intf,
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
+
+		if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
+			btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
 	}
 
 	if (id->driver_info & BTUSB_INTEL_NEW) {
Signature · 1 line
2.25.1
#7 lore raw

PATCH v7 6/12 Bluetooth: btintel: Fix the LED is not turning off immediately

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

Some platforms have an issue with BT LED when the interface is down or BT radio is turned off, which takes 5 seconds to BT LED goes off. This command turns off the BT LED immediately.

This patch sends the Intel vendor command to turn off the LED.

---
 drivers/bluetooth/btintel.c | 23 +++++++++++++++++++++++
 drivers/bluetooth/btintel.h |  1 +
 2 files changed, 24 insertions(+)
drivers/bluetooth/btintel.c +23 -0
index 8e6b497a2164..fd947a8798a9 100644
@@ -1737,6 +1737,13 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		case 0x07:	/* WP */
 		case 0x08:	/* StP */
 			/* Legacy ROM product */
+
+			/* These devices have an issue with LED which doesn't
+			 * go off immediately during shutdown. Set the flag
+			 * here to send the LED OFF command during shutdown.
+			 */
+			btintel_set_flag(hdev, INTEL_BROKEN_LED);
+
 			err = btintel_legacy_rom_setup(hdev, &ver);
 			break;
 		case 0x0b:      /* SfP */
@@ -1785,6 +1792,7 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 static int btintel_shutdown_combined(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
+	int ret;
 
 	/* Send HCI Reset to the controller to stop any BT activity which
 	 * were triggered. This will help to save power and maintain the
@@ -1797,6 +1805,21 @@ static int btintel_shutdown_combined(struct hci_dev *hdev)
 	}
 	kfree_skb(skb);
 
+
+	/* Some platforms have an issue with BT LED when the interface is
+	 * down or BT radio is turned off, which takes 5 seconds to BT LED
+	 * goes off. This command turns off the BT LED immediately.
+	 */
+	if (btintel_test_flag(hdev, INTEL_BROKEN_LED)) {
+		skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			ret = PTR_ERR(skb);
+			bt_dev_err(hdev, "turning off Intel device LED failed");
+			return ret;
+		}
+		kfree_skb(skb);
+	}
+
 	return 0;
 }
 
drivers/bluetooth/btintel.h +1 -0
index 8a49795ad5af..aef04fa0e1ef 100644
@@ -145,6 +145,7 @@ enum {
 	INTEL_FIRMWARE_FAILED,
 	INTEL_BOOTING,
 	INTEL_BROKEN_INITIAL_NCMD,
+	INTEL_BROKEN_LED,
 
 	__INTEL_NUM_FLAGS,
 };
Signature · 1 line
2.25.1
#8 lore raw

PATCH v7 7/12 Bluetooth: btintel: Add combined set_diag functions

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

This patch adds a combined set_diag functions.
It also changes the btintel_set_diag_mfg() to static since it is no longer used by others.

---
 drivers/bluetooth/btintel.c | 20 +++++++++++++++++++-
 drivers/bluetooth/btintel.h |  1 +
 2 files changed, 20 insertions(+), 1 deletion(-)
drivers/bluetooth/btintel.c +19 -1
index fd947a8798a9..9e9fd2222294 100644
@@ -181,6 +181,23 @@ static int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
 	return ret;
 }
 
+static int btintel_set_diag_combined(struct hci_dev *hdev, bool enable)
+{
+	int ret;
+
+	/* Legacy ROM device needs to be in the manufacturer mode to apply
+	 * diagnostic setting
+	 *
+	 * This flag is set after reading the Intel version.
+	 */
+	if (btintel_test_flag(hdev, INTEL_ROM_LEGACY))
+		ret = btintel_set_diag_mfg(hdev, enable);
+	else
+		ret = btintel_set_diag(hdev, enable);
+
+	return ret;
+}
+
 void btintel_hw_error(struct hci_dev *hdev, u8 code)
 {
 	struct sk_buff *skb;
@@ -1737,6 +1754,7 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		case 0x07:	/* WP */
 		case 0x08:	/* StP */
 			/* Legacy ROM product */
+			btintel_set_flag(hdev, INTEL_ROM_LEGACY);
 
 			/* These devices have an issue with LED which doesn't
 			 * go off immediately during shutdown. Set the flag
@@ -1828,7 +1846,7 @@ int btintel_configure_setup(struct hci_dev *hdev)
 	hdev->manufacturer = 2;
 	hdev->setup = btintel_setup_combined;
 	hdev->shutdown = btintel_shutdown_combined;
-	hdev->set_diag = btintel_set_diag_mfg;
+	hdev->set_diag = btintel_set_diag_combined;
 	hdev->set_bdaddr = btintel_set_bdaddr;
 
 	return 0;
drivers/bluetooth/btintel.h +1 -0
index aef04fa0e1ef..17cb62ac33f6 100644
@@ -146,6 +146,7 @@ enum {
 	INTEL_BOOTING,
 	INTEL_BROKEN_INITIAL_NCMD,
 	INTEL_BROKEN_LED,
+	INTEL_ROM_LEGACY,
 
 	__INTEL_NUM_FLAGS,
 };
Signature · 1 line
2.25.1
#9 lore raw

PATCH v7 8/12 Bluetooth: btintel: Refactoring setup routine for bootloader devices

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

This patch refactors the setup routines for legacy and TLV based bootloader devices to the combined setup, and move the related functions from btusb to btintel.

---
 drivers/bluetooth/btintel.c | 725 ++++++++++++++++++++++++++++++-----
 drivers/bluetooth/btintel.h |  25 +-
 drivers/bluetooth/btusb.c   | 737 +-----------------------------------
 3 files changed, 661 insertions(+), 826 deletions(-)
drivers/bluetooth/btintel.c +630 -95
index 9e9fd2222294..8593b27b7c4a 100644
@@ -631,90 +631,7 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 		return -EIO;
 	}
 
-	/* Consume Command Complete Status field */
-	skb_pull(skb, 1);
-
-	/* Event parameters contatin multiple TLVs. Read each of them
-	 * and only keep the required data. Also, it use existing legacy
-	 * version field like hw_platform, hw_variant, and fw_variant
-	 * to keep the existing setup flow
-	 */
-	while (skb->len) {
-		struct intel_tlv *tlv;
-
-		tlv = (struct intel_tlv *)skb->data;
-		switch (tlv->type) {
-		case INTEL_TLV_CNVI_TOP:
-			version->cnvi_top = get_unaligned_le32(tlv->val);
-			break;
-		case INTEL_TLV_CNVR_TOP:
-			version->cnvr_top = get_unaligned_le32(tlv->val);
-			break;
-		case INTEL_TLV_CNVI_BT:
-			version->cnvi_bt = get_unaligned_le32(tlv->val);
-			break;
-		case INTEL_TLV_CNVR_BT:
-			version->cnvr_bt = get_unaligned_le32(tlv->val);
-			break;
-		case INTEL_TLV_DEV_REV_ID:
-			version->dev_rev_id = get_unaligned_le16(tlv->val);
-			break;
-		case INTEL_TLV_IMAGE_TYPE:
-			version->img_type = tlv->val[0];
-			break;
-		case INTEL_TLV_TIME_STAMP:
-			/* If image type is Operational firmware (0x03), then
-			 * running FW Calendar Week and Year information can
-			 * be extracted from Timestamp information
-			 */
-			version->min_fw_build_cw = tlv->val[0];
-			version->min_fw_build_yy = tlv->val[1];
-			version->timestamp = get_unaligned_le16(tlv->val);
-			break;
-		case INTEL_TLV_BUILD_TYPE:
-			version->build_type = tlv->val[0];
-			break;
-		case INTEL_TLV_BUILD_NUM:
-			/* If image type is Operational firmware (0x03), then
-			 * running FW build number can be extracted from the
-			 * Build information
-			 */
-			version->min_fw_build_nn = tlv->val[0];
-			version->build_num = get_unaligned_le32(tlv->val);
-			break;
-		case INTEL_TLV_SECURE_BOOT:
-			version->secure_boot = tlv->val[0];
-			break;
-		case INTEL_TLV_OTP_LOCK:
-			version->otp_lock = tlv->val[0];
-			break;
-		case INTEL_TLV_API_LOCK:
-			version->api_lock = tlv->val[0];
-			break;
-		case INTEL_TLV_DEBUG_LOCK:
-			version->debug_lock = tlv->val[0];
-			break;
-		case INTEL_TLV_MIN_FW:
-			version->min_fw_build_nn = tlv->val[0];
-			version->min_fw_build_cw = tlv->val[1];
-			version->min_fw_build_yy = tlv->val[2];
-			break;
-		case INTEL_TLV_LIMITED_CCE:
-			version->limited_cce = tlv->val[0];
-			break;
-		case INTEL_TLV_SBE_TYPE:
-			version->sbe_type = tlv->val[0];
-			break;
-		case INTEL_TLV_OTP_BDADDR:
-			memcpy(&version->otp_bd_addr, tlv->val, tlv->len);
-			break;
-		default:
-			/* Ignore rest of information */
-			break;
-		}
-		/* consume the current tlv and move to next*/
-		skb_pull(skb, tlv->len + sizeof(*tlv));
-	}
+	btintel_parse_version_tlv(hdev, version, skb);
 
 	kfree_skb(skb);
 	return 0;
@@ -1192,10 +1109,10 @@ int btintel_download_firmware(struct hci_dev *hdev,
 }
 EXPORT_SYMBOL_GPL(btintel_download_firmware);
 
-int btintel_download_firmware_newgen(struct hci_dev *hdev,
-				     struct intel_version_tlv *ver,
-				     const struct firmware *fw, u32 *boot_param,
-				     u8 hw_variant, u8 sbe_type)
+static int btintel_download_fw_tlv(struct hci_dev *hdev,
+				   struct intel_version_tlv *ver,
+				   const struct firmware *fw, u32 *boot_param,
+				   u8 hw_variant, u8 sbe_type)
 {
 	int err;
 	u32 css_header_ver;
@@ -1292,7 +1209,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 	}
 	return 0;
 }
-EXPORT_SYMBOL_GPL(btintel_download_firmware_newgen);
 
 void btintel_reset_to_bootloader(struct hci_dev *hdev)
 {
@@ -1683,6 +1599,579 @@ static int btintel_legacy_rom_setup(struct hci_dev *hdev,
 	return 0;
 }
 
+static int btintel_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+	ktime_t delta, rettime;
+	unsigned long long duration;
+	int err;
+
+	btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+
+	bt_dev_info(hdev, "Waiting for firmware download to complete");
+
+	err = btintel_wait_on_flag_timeout(hdev, INTEL_DOWNLOADING,
+					   TASK_INTERRUPTIBLE,
+					   msecs_to_jiffies(msec));
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Firmware loading interrupted");
+		return err;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Firmware loading timeout");
+		return -ETIMEDOUT;
+	}
+
+	if (btintel_test_flag(hdev, INTEL_FIRMWARE_FAILED)) {
+		bt_dev_err(hdev, "Firmware loading failed");
+		return -ENOEXEC;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
+
+	return 0;
+}
+
+static int btintel_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+	ktime_t delta, rettime;
+	unsigned long long duration;
+	int err;
+
+	bt_dev_info(hdev, "Waiting for device to boot");
+
+	err = btintel_wait_on_flag_timeout(hdev, INTEL_BOOTING,
+					   TASK_INTERRUPTIBLE,
+					   msecs_to_jiffies(msec));
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Device boot interrupted");
+		return -EINTR;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Device boot timeout");
+		return -ETIMEDOUT;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+	return 0;
+}
+
+static int btintel_boot(struct hci_dev *hdev, u32 boot_addr)
+{
+	ktime_t calltime;
+	int err;
+
+	calltime = ktime_get();
+
+	btintel_set_flag(hdev, INTEL_BOOTING);
+
+	err = btintel_send_intel_reset(hdev, boot_addr);
+	if (err) {
+		bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
+		btintel_reset_to_bootloader(hdev);
+		return err;
+	}
+
+	/* The bootloader will not indicate when the device is ready. This
+	 * is done by the operational firmware sending bootup notification.
+	 *
+	 * Booting into operational firmware should not take longer than
+	 * 1 second. However if that happens, then just fail the setup
+	 * since something went wrong.
+	 */
+	err = btintel_boot_wait(hdev, calltime, 1000);
+	if (err == -ETIMEDOUT)
+		btintel_reset_to_bootloader(hdev);
+
+	return err;
+}
+
+static int btintel_get_fw_name(struct intel_version *ver,
+					     struct intel_boot_params *params,
+					     char *fw_name, size_t len,
+					     const char *suffix)
+{
+	switch (ver->hw_variant) {
+	case 0x0b:	/* SfP */
+	case 0x0c:	/* WsP */
+		snprintf(fw_name, len, "intel/ibt-%u-%u.%s",
+			le16_to_cpu(ver->hw_variant),
+			le16_to_cpu(params->dev_revid),
+			suffix);
+		break;
+	case 0x11:	/* JfP */
+	case 0x12:	/* ThP */
+	case 0x13:	/* HrP */
+	case 0x14:	/* CcP */
+		snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s",
+			le16_to_cpu(ver->hw_variant),
+			le16_to_cpu(ver->hw_revision),
+			le16_to_cpu(ver->fw_revision),
+			suffix);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int btintel_download_fw(struct hci_dev *hdev,
+					 struct intel_version *ver,
+					 struct intel_boot_params *params,
+					 u32 *boot_param)
+{
+	const struct firmware *fw;
+	char fwname[64];
+	int err;
+	ktime_t calltime;
+
+	if (!ver || !params)
+		return -EINVAL;
+
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x06 identifies
+	 * the bootloader and the value 0x23 identifies the operational
+	 * firmware.
+	 *
+	 * When the operational firmware is already present, then only
+	 * the check for valid Bluetooth device address is needed. This
+	 * determines if the device will be added as configured or
+	 * unconfigured controller.
+	 *
+	 * It is not possible to use the Secure Boot Parameters in this
+	 * case since that command is only available in bootloader mode.
+	 */
+	if (ver->fw_variant == 0x23) {
+		btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+		btintel_check_bdaddr(hdev);
+
+		/* SfP and WsP don't seem to update the firmware version on file
+		 * so version checking is currently possible.
+		 */
+		switch (ver->hw_variant) {
+		case 0x0b:	/* SfP */
+		case 0x0c:	/* WsP */
+			return 0;
+		}
+
+		/* Proceed to download to check if the version matches */
+		goto download;
+	}
+
+	/* Read the secure boot parameters to identify the operating
+	 * details of the bootloader.
+	 */
+	err = btintel_read_boot_params(hdev, params);
+	if (err)
+		return err;
+
+	/* It is required that every single firmware fragment is acknowledged
+	 * with a command complete event. If the boot parameters indicate
+	 * that this bootloader does not send them, then abort the setup.
+	 */
+	if (params->limited_cce != 0x00) {
+		bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
+			   params->limited_cce);
+		return -EINVAL;
+	}
+
+	/* If the OTP has no valid Bluetooth device address, then there will
+	 * also be no valid address for the operational firmware.
+	 */
+	if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
+		bt_dev_info(hdev, "No device address configured");
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+download:
+	/* With this Intel bootloader only the hardware variant and device
+	 * revision information are used to select the right firmware for SfP
+	 * and WsP.
+	 *
+	 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
+	 *
+	 * Currently the supported hardware variants are:
+	 *   11 (0x0b) for iBT3.0 (LnP/SfP)
+	 *   12 (0x0c) for iBT3.5 (WsP)
+	 *
+	 * For ThP/JfP and for future SKU's, the FW name varies based on HW
+	 * variant, HW revision and FW revision, as these are dependent on CNVi
+	 * and RF Combination.
+	 *
+	 *   17 (0x11) for iBT3.5 (JfP)
+	 *   18 (0x12) for iBT3.5 (ThP)
+	 *
+	 * The firmware file name for these will be
+	 * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
+	 *
+	 */
+	err = btintel_get_fw_name(ver, params, fwname, sizeof(fwname), "sfi");
+	if (err < 0) {
+		if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+			/* Firmware has already been loaded */
+			btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+			return 0;
+		}
+
+		bt_dev_err(hdev, "Unsupported Intel firmware naming");
+		return -EINVAL;
+	}
+
+	err = firmware_request_nowarn(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+			/* Firmware has already been loaded */
+			btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+			return 0;
+		}
+
+		bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
+			   fwname, err);
+		return err;
+	}
+
+	bt_dev_info(hdev, "Found device firmware: %s", fwname);
+
+	if (fw->size < 644) {
+		bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
+			   fw->size);
+		err = -EBADF;
+		goto done;
+	}
+
+	calltime = ktime_get();
+
+	btintel_set_flag(hdev, INTEL_DOWNLOADING);
+
+	/* Start firmware downloading and get boot parameter */
+	err = btintel_download_firmware(hdev, ver, fw, boot_param);
+	if (err < 0) {
+		if (err == -EALREADY) {
+			/* Firmware has already been loaded */
+			btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+			err = 0;
+			goto done;
+		}
+
+		/* When FW download fails, send Intel Reset to retry
+		 * FW download.
+		 */
+		btintel_reset_to_bootloader(hdev);
+		goto done;
+	}
+
+	/* Before switching the device into operational mode and with that
+	 * booting the loaded firmware, wait for the bootloader notification
+	 * that all fragments have been successfully received.
+	 *
+	 * When the event processing receives the notification, then the
+	 * INTEL_DOWNLOADING flag will be cleared.
+	 *
+	 * The firmware loading should not take longer than 5 seconds
+	 * and thus just timeout if that happens and fail the setup
+	 * of this device.
+	 */
+	err = btintel_download_wait(hdev, calltime, 5000);
+	if (err == -ETIMEDOUT)
+		btintel_reset_to_bootloader(hdev);
+
+done:
+	release_firmware(fw);
+	return err;
+}
+
+static int btintel_bootloader_setup(struct hci_dev *hdev,
+				    struct intel_version *ver)
+{
+	struct intel_version new_ver;
+	struct intel_boot_params params;
+	u32 boot_param;
+	char ddcname[64];
+	int err;
+	struct intel_debug_features features;
+
+	BT_DBG("%s", hdev->name);
+
+	/* Set the default boot parameter to 0x0 and it is updated to
+	 * SKU specific boot parameter after reading Intel_Write_Boot_Params
+	 * command while downloading the firmware.
+	 */
+	boot_param = 0x00000000;
+
+	btintel_set_flag(hdev, INTEL_BOOTLOADER);
+
+	err = btintel_download_fw(hdev, ver, &params, &boot_param);
+	if (err)
+		return err;
+
+	/* controller is already having an operational firmware */
+	if (ver->fw_variant == 0x23)
+		goto finish;
+
+	err = btintel_boot(hdev, boot_param);
+	if (err)
+		return err;
+
+	btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+
+	err = btintel_get_fw_name(ver, &params, ddcname,
+						sizeof(ddcname), "ddc");
+
+	if (err < 0) {
+		bt_dev_err(hdev, "Unsupported Intel firmware naming");
+	} else {
+		/* Once the device is running in operational mode, it needs to
+		 * apply the device configuration (DDC) parameters.
+		 *
+		 * The device can work without DDC parameters, so even if it
+		 * fails to load the file, no need to fail the setup.
+		 */
+		btintel_load_ddc_config(hdev, ddcname);
+	}
+
+	/* Read the Intel supported features and if new exception formats
+	 * supported, need to load the additional DDC config to enable.
+	 */
+	err = btintel_read_debug_features(hdev, &features);
+	if (!err) {
+		/* Set DDC mask for available debug features */
+		btintel_set_debug_features(hdev, &features);
+	}
+
+	/* Read the Intel version information after loading the FW  */
+	err = btintel_read_version(hdev, &new_ver);
+	if (err)
+		return err;
+
+	btintel_version_info(hdev, &new_ver);
+
+finish:
+	/* All Intel controllers that support the Microsoft vendor
+	 * extension are using 0xFC1E for VsMsftOpCode.
+	 */
+	switch (ver->hw_variant) {
+	case 0x11:	/* JfP */
+	case 0x12:	/* ThP */
+	case 0x13:	/* HrP */
+	case 0x14:	/* CcP */
+		hci_set_msft_opcode(hdev, 0xFC1E);
+		break;
+	}
+
+	/* Set the event mask for Intel specific vendor events. This enables
+	 * a few extra events that are useful during general operation. It
+	 * does not enable any debugging related events.
+	 *
+	 * The device will function correctly without these events enabled
+	 * and thus no need to fail the setup.
+	 */
+	btintel_set_event_mask(hdev, false);
+
+	return 0;
+}
+
+static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver,
+				    char *fw_name, size_t len,
+				    const char *suffix)
+{
+	/* The firmware file name for new generation controllers will be
+	 * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step>
+	 */
+	snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s",
+		 INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top),
+					  INTEL_CNVX_TOP_STEP(ver->cnvi_top)),
+		 INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top),
+					  INTEL_CNVX_TOP_STEP(ver->cnvr_top)),
+		 suffix);
+}
+
+static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev,
+					   struct intel_version_tlv *ver,
+					   u32 *boot_param)
+{
+	const struct firmware *fw;
+	char fwname[64];
+	int err;
+	ktime_t calltime;
+
+	if (!ver || !boot_param)
+		return -EINVAL;
+
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x03 identifies
+	 * the bootloader and the value 0x23 identifies the operational
+	 * firmware.
+	 *
+	 * When the operational firmware is already present, then only
+	 * the check for valid Bluetooth device address is needed. This
+	 * determines if the device will be added as configured or
+	 * unconfigured controller.
+	 *
+	 * It is not possible to use the Secure Boot Parameters in this
+	 * case since that command is only available in bootloader mode.
+	 */
+	if (ver->img_type == 0x03) {
+		btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+		btintel_check_bdaddr(hdev);
+	}
+
+	/* If the OTP has no valid Bluetooth device address, then there will
+	 * also be no valid address for the operational firmware.
+	 */
+	if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {
+		bt_dev_info(hdev, "No device address configured");
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	btintel_get_fw_name_tlv(ver, fwname, sizeof(fwname), "sfi");
+	err = firmware_request_nowarn(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+			/* Firmware has already been loaded */
+			btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+			return 0;
+		}
+
+		bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
+			   fwname, err);
+
+		return err;
+	}
+
+	bt_dev_info(hdev, "Found device firmware: %s", fwname);
+
+	if (fw->size < 644) {
+		bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
+			   fw->size);
+		err = -EBADF;
+		goto done;
+	}
+
+	calltime = ktime_get();
+
+	btintel_set_flag(hdev, INTEL_DOWNLOADING);
+
+	/* Start firmware downloading and get boot parameter */
+	err = btintel_download_fw_tlv(hdev, ver, fw, boot_param,
+					       INTEL_HW_VARIANT(ver->cnvi_bt),
+					       ver->sbe_type);
+	if (err < 0) {
+		if (err == -EALREADY) {
+			/* Firmware has already been loaded */
+			btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+			err = 0;
+			goto done;
+		}
+
+		/* When FW download fails, send Intel Reset to retry
+		 * FW download.
+		 */
+		btintel_reset_to_bootloader(hdev);
+		goto done;
+	}
+
+	/* Before switching the device into operational mode and with that
+	 * booting the loaded firmware, wait for the bootloader notification
+	 * that all fragments have been successfully received.
+	 *
+	 * When the event processing receives the notification, then the
+	 * BTUSB_DOWNLOADING flag will be cleared.
+	 *
+	 * The firmware loading should not take longer than 5 seconds
+	 * and thus just timeout if that happens and fail the setup
+	 * of this device.
+	 */
+	err = btintel_download_wait(hdev, calltime, 5000);
+	if (err == -ETIMEDOUT)
+		btintel_reset_to_bootloader(hdev);
+
+done:
+	release_firmware(fw);
+	return err;
+}
+
+static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
+					struct intel_version_tlv *ver)
+{
+	u32 boot_param;
+	char ddcname[64];
+	int err;
+	struct intel_debug_features features;
+	struct intel_version_tlv new_ver;
+
+	bt_dev_dbg(hdev, "");
+
+	/* Set the default boot parameter to 0x0 and it is updated to
+	 * SKU specific boot parameter after reading Intel_Write_Boot_Params
+	 * command while downloading the firmware.
+	 */
+	boot_param = 0x00000000;
+
+	btintel_set_flag(hdev, INTEL_BOOTLOADER);
+
+	err = btintel_prepare_fw_download_tlv(hdev, ver, &boot_param);
+	if (err)
+		return err;
+
+	/* check if controller is already having an operational firmware */
+	if (ver->img_type == 0x03)
+		goto finish;
+
+	err = btintel_boot(hdev, boot_param);
+	if (err)
+		return err;
+
+	btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+
+	btintel_get_fw_name_tlv(ver, ddcname, sizeof(ddcname), "ddc");
+	/* Once the device is running in operational mode, it needs to
+	 * apply the device configuration (DDC) parameters.
+	 *
+	 * The device can work without DDC parameters, so even if it
+	 * fails to load the file, no need to fail the setup.
+	 */
+	btintel_load_ddc_config(hdev, ddcname);
+
+	/* Read the Intel supported features and if new exception formats
+	 * supported, need to load the additional DDC config to enable.
+	 */
+	err = btintel_read_debug_features(hdev, &features);
+	if (!err) {
+		/* Set DDC mask for available debug features */
+		btintel_set_debug_features(hdev, &features);
+	}
+
+	/* Read the Intel version information after loading the FW  */
+	err = btintel_read_version_tlv(hdev, &new_ver);
+	if (err)
+		return err;
+
+	btintel_version_info_tlv(hdev, &new_ver);
+
+finish:
+	/* Set the event mask for Intel specific vendor events. This enables
+	 * a few extra events that are useful during general operation. It
+	 * does not enable any debugging related events.
+	 *
+	 * The device will function correctly without these events enabled
+	 * and thus no need to fail the setup.
+	 */
+	btintel_set_event_mask(hdev, false);
+
+	return 0;
+}
+
 static int btintel_setup_combined(struct hci_dev *hdev)
 {
 	const u8 param[1] = { 0xFF };
@@ -1770,7 +2259,7 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		case 0x12:      /* ThP */
 		case 0x13:      /* HrP */
 		case 0x14:      /* CcP */
-			/* TODO: call setup routine for bootloader product */
+			err = btintel_bootloader_setup(hdev, &ver);
 			break;
 		default:
 			bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
@@ -1795,11 +2284,27 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		goto exit_error;
 	}
 
-	/* Display version information of TLV type */
-	btintel_version_info_tlv(hdev, &ver_tlv);
-
-	/* TODO: Need to filter the device for new generation */
-	/* TODO: call setup routine for tlv based bootloader product */
+	/* Check for supported iBT hardware variants of this firmware
+	 * loading method.
+	 *
+	 * This check has been put in place to ensure correct forward
+	 * compatibility options when newer hardware variants come
+	 * along.
+	 */
+	switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) {
+	case 0x17:
+	case 0x18:
+	case 0x19:
+		/* Display version information of TLV type */
+		btintel_version_info_tlv(hdev, &ver_tlv);
+
+		err = btintel_bootloader_setup_tlv(hdev, &ver_tlv);
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
+			   INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
+		return -EINVAL;
+	}
 
 exit_error:
 	kfree_skb(skb);
@@ -1846,6 +2351,7 @@ int btintel_configure_setup(struct hci_dev *hdev)
 	hdev->manufacturer = 2;
 	hdev->setup = btintel_setup_combined;
 	hdev->shutdown = btintel_shutdown_combined;
+	hdev->hw_error = btintel_hw_error;
 	hdev->set_diag = btintel_set_diag_combined;
 	hdev->set_bdaddr = btintel_set_bdaddr;
 
@@ -1853,6 +2359,35 @@ int btintel_configure_setup(struct hci_dev *hdev)
 }
 EXPORT_SYMBOL_GPL(btintel_configure_setup);
 
+void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len)
+{
+	const struct intel_bootup *evt = ptr;
+
+	if (len != sizeof(*evt))
+		return;
+
+	if (btintel_test_and_clear_flag(hdev, INTEL_BOOTING))
+		btintel_wake_up_flag(hdev, INTEL_BOOTING);
+}
+EXPORT_SYMBOL_GPL(btintel_bootup);
+
+void btintel_secure_send_result(struct hci_dev *hdev,
+				const void *ptr, unsigned int len)
+{
+	const struct intel_secure_send_result *evt = ptr;
+
+	if (len != sizeof(*evt))
+		return;
+
+	if (evt->result)
+		btintel_set_flag(hdev, INTEL_FIRMWARE_FAILED);
+
+	if (btintel_test_and_clear_flag(hdev, INTEL_DOWNLOADING) &&
+	    btintel_test_flag(hdev, INTEL_FIRMWARE_LOADED))
+		btintel_wake_up_flag(hdev, INTEL_DOWNLOADING);
+}
+EXPORT_SYMBOL_GPL(btintel_secure_send_result);
+
 MODULE_AUTHOR("Marcel Holtmann <[email protected]>");
 MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
 MODULE_VERSION(VERSION);
drivers/bluetooth/btintel.h +12 -13
index 17cb62ac33f6..5a8a696eecf2 100644
@@ -207,17 +207,15 @@ int btintel_read_boot_params(struct hci_dev *hdev,
 			     struct intel_boot_params *params);
 int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver,
 			      const struct firmware *fw, u32 *boot_param);
-int btintel_download_firmware_newgen(struct hci_dev *hdev,
-				     struct intel_version_tlv *ver,
-				     const struct firmware *fw,
-				     u32 *boot_param, u8 hw_variant,
-				     u8 sbe_type);
 void btintel_reset_to_bootloader(struct hci_dev *hdev);
 int btintel_read_debug_features(struct hci_dev *hdev,
 				struct intel_debug_features *features);
 int btintel_set_debug_features(struct hci_dev *hdev,
 			       const struct intel_debug_features *features);
 int btintel_configure_setup(struct hci_dev *hdev);
+void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len);
+void btintel_secure_send_result(struct hci_dev *hdev,
+				const void *ptr, unsigned int len);
 #else
 
 static inline int btintel_check_bdaddr(struct hci_dev *hdev)
@@ -321,14 +319,6 @@ static inline int btintel_download_firmware(struct hci_dev *dev,
 	return -EOPNOTSUPP;
 }
 
-static inline int btintel_download_firmware_newgen(struct hci_dev *hdev,
-						   const struct firmware *fw,
-						   u32 *boot_param,
-						   u8 hw_variant, u8 sbe_type)
-{
-	return -EOPNOTSUPP;
-}
-
 static inline void btintel_reset_to_bootloader(struct hci_dev *hdev)
 {
 }
@@ -350,4 +340,13 @@ static inline int btintel_configure_setup(struct hci_dev *hdev)
 	return -ENODEV;
 }
 
+static inline void btintel_bootup(struct hci_dev *hdev,
+				  const void *ptr, unsigned int len)
+{
+}
+
+static inline void btintel_secure_send_result(struct hci_dev *hdev,
+				const void *ptr, unsigned int len)
+{
+}
 #endif
drivers/bluetooth/btusb.c +19 -718

840 lines not on this page · raw message

Signature · 1 line
2.25.1
#10 lore raw

PATCH v7 9/12 Bluetooth: btintel: Move hci quirks to setup routine

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

This patch moves the hci quirks for Intel devices into the setup routines and cleaned up the driver flags.

---
 drivers/bluetooth/btintel.c | 36 ++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/btusb.c   | 31 ++++++++-----------------------
 2 files changed, 44 insertions(+), 23 deletions(-)
drivers/bluetooth/btintel.c +36 -0
index 8593b27b7c4a..421357831f3d 100644
@@ -2223,6 +2223,11 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		goto exit_error;
 	}
 
+	/* Apply the common HCI quirks for Intel device */
+	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+	set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
+
 	/* For Legacy device, check the HW platform value and size */
 	if (skb->len == sizeof(ver) && skb->data[1] == 0x37) {
 		bt_dev_dbg(hdev, "Read the legacy Intel version information");
@@ -2245,6 +2250,15 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 			/* Legacy ROM product */
 			btintel_set_flag(hdev, INTEL_ROM_LEGACY);
 
+			/* Apply the device specific HCI quirks
+			 *
+			 * WBS for SdP - SdP and Stp have a same hw_varaint but
+			 * different fw_variant
+			 */
+			if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22)
+				set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
+					&hdev->quirks);
+
 			/* These devices have an issue with LED which doesn't
 			 * go off immediately during shutdown. Set the flag
 			 * here to send the LED OFF command during shutdown.
@@ -2259,6 +2273,18 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		case 0x12:      /* ThP */
 		case 0x13:      /* HrP */
 		case 0x14:      /* CcP */
+			/* Apply the device specific HCI quirks
+			 *
+			 * All Legacy bootloader devices support WBS
+			 */
+			set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
+				&hdev->quirks);
+
+			/* Valid LE States quirk for JfP/ThP familiy */
+			if (ver.hw_variant == 0x11 || ver.hw_variant == 0x12)
+				set_bit(HCI_QUIRK_VALID_LE_STATES,
+					&hdev->quirks);
+
 			err = btintel_bootloader_setup(hdev, &ver);
 			break;
 		default:
@@ -2298,6 +2324,16 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		/* Display version information of TLV type */
 		btintel_version_info_tlv(hdev, &ver_tlv);
 
+		/* Apply the device specific HCI quirks for TLV based devices
+		 *
+		 * All TLV based devices support WBS
+		 */
+		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+
+		/* Valid LE States quirk for GfP */
+		if (INTEL_HW_VARIANT(ver_tlv.cnvi_bt) == 0x18)
+			set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
 		err = btintel_bootloader_setup_tlv(hdev, &ver_tlv);
 		break;
 	default:
drivers/bluetooth/btusb.c +8 -23
index 26863d8c1337..a97af4ef6bc4 100644
@@ -358,29 +358,18 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL },
 
 	/* Intel Bluetooth devices */
-	{ USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_WIDEBAND_SPEECH |
-						     BTUSB_VALID_LE_STATES },
-	{ USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_WIDEBAND_SPEECH},
-	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_WIDEBAND_SPEECH |
-						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED },
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
 						     BTUSB_INTEL_BROKEN_INITIAL_NCMD },
 	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED },
-	{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_WIDEBAND_SPEECH |
-						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED },
 
 	/* Other Intel Bluetooth devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
@@ -3821,10 +3810,6 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->send = btusb_send_frame_intel;
 		hdev->cmd_timeout = btusb_intel_cmd_timeout;
 
-		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
-		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
-		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
-
 		if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
 			btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
 	}
Signature · 1 line
2.25.1
#11 lore raw

PATCH v7 10/12 Bluetooth: btintel: Clean the exported function to static

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

This patch changes the exported functions to static if they are no longer used by others.

---
 drivers/bluetooth/btintel.c | 68 +++++++++++++++++--------------------
 drivers/bluetooth/btintel.h | 55 ------------------------------
 2 files changed, 31 insertions(+), 92 deletions(-)
drivers/bluetooth/btintel.c +31 -37
index 421357831f3d..4f0ba6031c57 100644
@@ -131,6 +131,26 @@ int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 }
 EXPORT_SYMBOL_GPL(btintel_set_bdaddr);
 
+static int btintel_set_event_mask(struct hci_dev *hdev, bool debug)
+{
+	u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+	struct sk_buff *skb;
+	int err;
+
+	if (debug)
+		mask[1] |= 0x62;
+
+	skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
 int btintel_set_diag(struct hci_dev *hdev, bool enable)
 {
 	struct sk_buff *skb;
@@ -198,7 +218,7 @@ static int btintel_set_diag_combined(struct hci_dev *hdev, bool enable)
 	return ret;
 }
 
-void btintel_hw_error(struct hci_dev *hdev, u8 code)
+static void btintel_hw_error(struct hci_dev *hdev, u8 code)
 {
 	struct sk_buff *skb;
 	u8 type = 0x00;
@@ -230,7 +250,6 @@ void btintel_hw_error(struct hci_dev *hdev, u8 code)
 
 	kfree_skb(skb);
 }
-EXPORT_SYMBOL_GPL(btintel_hw_error);
 
 int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
 {
@@ -294,8 +313,8 @@ int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
 }
 EXPORT_SYMBOL_GPL(btintel_version_info);
 
-int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
-			const void *param)
+static int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
+			       const void *param)
 {
 	while (plen > 0) {
 		struct sk_buff *skb;
@@ -317,7 +336,6 @@ int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(btintel_secure_send);
 
 int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name)
 {
@@ -364,27 +382,6 @@ int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name)
 }
 EXPORT_SYMBOL_GPL(btintel_load_ddc_config);
 
-int btintel_set_event_mask(struct hci_dev *hdev, bool debug)
-{
-	u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-	struct sk_buff *skb;
-	int err;
-
-	if (debug)
-		mask[1] |= 0x62;
-
-	skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		err = PTR_ERR(skb);
-		bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err);
-		return err;
-	}
-	kfree_skb(skb);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(btintel_set_event_mask);
-
 int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug)
 {
 	int err, ret;
@@ -428,7 +425,8 @@ int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
 }
 EXPORT_SYMBOL_GPL(btintel_read_version);
 
-int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+static int btintel_version_info_tlv(struct hci_dev *hdev,
+				    struct intel_version_tlv *version)
 {
 	const char *variant;
 
@@ -505,7 +503,6 @@ int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
 
 static int btintel_parse_version_tlv(struct hci_dev *hdev,
 				     struct intel_version_tlv *version,
@@ -609,7 +606,8 @@ static int btintel_parse_version_tlv(struct hci_dev *hdev,
 	return 0;
 }
 
-int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+static int btintel_read_version_tlv(struct hci_dev *hdev,
+				    struct intel_version_tlv *version)
 {
 	struct sk_buff *skb;
 	const u8 param[1] = { 0xFF };
@@ -636,7 +634,6 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 	kfree_skb(skb);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(btintel_read_version_tlv);
 
 /* ------- REGMAP IBT SUPPORT ------- */
 
@@ -1210,7 +1207,7 @@ static int btintel_download_fw_tlv(struct hci_dev *hdev,
 	return 0;
 }
 
-void btintel_reset_to_bootloader(struct hci_dev *hdev)
+static void btintel_reset_to_bootloader(struct hci_dev *hdev)
 {
 	struct intel_reset params;
 	struct sk_buff *skb;
@@ -1253,10 +1250,9 @@ void btintel_reset_to_bootloader(struct hci_dev *hdev)
 	 */
 	msleep(150);
 }
-EXPORT_SYMBOL_GPL(btintel_reset_to_bootloader);
 
-int btintel_read_debug_features(struct hci_dev *hdev,
-				struct intel_debug_features *features)
+static int btintel_read_debug_features(struct hci_dev *hdev,
+				       struct intel_debug_features *features)
 {
 	struct sk_buff *skb;
 	u8 page_no = 1;
@@ -1285,9 +1281,8 @@ int btintel_read_debug_features(struct hci_dev *hdev,
 	kfree_skb(skb);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(btintel_read_debug_features);
 
-int btintel_set_debug_features(struct hci_dev *hdev,
+static int btintel_set_debug_features(struct hci_dev *hdev,
 			       const struct intel_debug_features *features)
 {
 	u8 mask[11] = { 0x0a, 0x92, 0x02, 0x07, 0x00, 0x00, 0x00, 0x00,
@@ -1312,7 +1307,6 @@ int btintel_set_debug_features(struct hci_dev *hdev,
 	kfree_skb(skb);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(btintel_set_debug_features);
 
 static const struct firmware *btintel_legacy_rom_get_fw(struct hci_dev *hdev,
 					       struct intel_version *ver)
drivers/bluetooth/btintel.h +0 -55

102 lines not on this page · raw message

Signature · 1 line
2.25.1
#12 lore raw

PATCH v7 11/12 Bluetooth: btintel: Fix the legacy bootloader returns tlv based version

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

From the ThP, it supports both legacy and TLV based HCI_Intel_Read_Version command after downloading the operational firmware, and it causes the driver to choose the wrong setup routines and missing firmware/ddc file.

So, as a workaround, this patch checks the fw variant from the TLV based version, and if the device is legacy bootloader device, the legacy HCI_Intel_Read_Version command is used to get the legacy version information and run the legacy bootloader setup with it.

---
 drivers/bluetooth/btintel.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/bluetooth/btintel.c +21 -0
index 4f0ba6031c57..2941d33d0bc2 100644
@@ -2312,6 +2312,27 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 	 * along.
 	 */
 	switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) {
+	case 0x11:      /* JfP */
+	case 0x12:      /* ThP */
+	case 0x13:      /* HrP */
+	case 0x14:      /* CcP */
+		/* Some legacy bootloader devices from JfP supports both old
+		 * and TLV based HCI_Intel_Read_Version command. But we don't
+		 * want to use the TLV based setup routines for those legacy
+		 * bootloader device.
+		 *
+		 * Also, it is not easy to convert TLV based version from the
+		 * legacy version format.
+		 *
+		 * So, as a workaround for those devices, use the legacy
+		 * HCI_Intel_Read_Version to get the version information and
+		 * run the legacy bootloader setup.
+		 */
+		err = btintel_read_version(hdev, &ver);
+		if (err)
+			return err;
+		err = btintel_bootloader_setup(hdev, &ver);
+		break;
 	case 0x17:
 	case 0x18:
 	case 0x19:
Signature · 1 line
2.25.1
#13 lore raw

PATCH v7 12/12 Bluetooth: btintel: Combine setting up MSFT extension

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

This patch combines the setting up MSFT extension for the legacy and TLV based bootloader into the common function based on hw_variant.

---
 drivers/bluetooth/btintel.c | 41 ++++++++++++++++++++++++++-----------
 1 file changed, 29 insertions(+), 12 deletions(-)
drivers/bluetooth/btintel.c +29 -12
index 2941d33d0bc2..f1705b46fc88 100644
@@ -1951,18 +1951,6 @@ static int btintel_bootloader_setup(struct hci_dev *hdev,
 	btintel_version_info(hdev, &new_ver);
 
 finish:
-	/* All Intel controllers that support the Microsoft vendor
-	 * extension are using 0xFC1E for VsMsftOpCode.
-	 */
-	switch (ver->hw_variant) {
-	case 0x11:	/* JfP */
-	case 0x12:	/* ThP */
-	case 0x13:	/* HrP */
-	case 0x14:	/* CcP */
-		hci_set_msft_opcode(hdev, 0xFC1E);
-		break;
-	}
-
 	/* Set the event mask for Intel specific vendor events. This enables
 	 * a few extra events that are useful during general operation. It
 	 * does not enable any debugging related events.
@@ -2166,6 +2154,28 @@ static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
 	return 0;
 }
 
+static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant)
+{
+	switch (hw_variant) {
+	/* Legacy bootloader devices that supports MSFT Extension */
+	case 0x11:	/* JfP */
+	case 0x12:	/* ThP */
+	case 0x13:	/* HrP */
+	case 0x14:	/* CcP */
+	/* All Intel new genration controllers support the Microsoft vendor
+	 * extension are using 0xFC1E for VsMsftOpCode.
+	 */
+	case 0x17:
+	case 0x18:
+	case 0x19:
+		hci_set_msft_opcode(hdev, 0xFC1E);
+		break;
+	default:
+		/* Not supported */
+		break;
+	}
+}
+
 static int btintel_setup_combined(struct hci_dev *hdev)
 {
 	const u8 param[1] = { 0xFF };
@@ -2279,6 +2289,9 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 				set_bit(HCI_QUIRK_VALID_LE_STATES,
 					&hdev->quirks);
 
+			/* Setup MSFT Extension support */
+			btintel_set_msft_opcode(hdev, ver.hw_variant);
+
 			err = btintel_bootloader_setup(hdev, &ver);
 			break;
 		default:
@@ -2349,6 +2362,10 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		if (INTEL_HW_VARIANT(ver_tlv.cnvi_bt) == 0x18)
 			set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
 
+		/* Setup MSFT Extension support */
+		btintel_set_msft_opcode(hdev,
+					INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
+
 		err = btintel_bootloader_setup_tlv(hdev, &ver_tlv);
 		break;
 	default:
Signature · 1 line
2.25.1
maintainer
#14 lore raw
In reply to Tedd Ho-Jeong An

Hi Tedd,

Quoted 76 lines

Changes in v7:
- Rebase the patchsets to the tip of the bluetooth-next 6eefec4a0 ("Bluetooth: Add additional Bluetooth part for Realtek 8852AE")

- Some basic testing were done with the following Intel devices to verify the firmware loading and some profiles (LE HID, A2DP, HFP)

	WP2_B3
	WP2_B5
	StP
	SdP
	SfP
	WsP
	ThP
	CcP
	TyP

This patch set refactors the multiple setup routines for various Intel devices to a combined single entry. Here are the highlight of the changes:

1. Updated hci_alloc_dev() to allocate the hdev object with an extra buffer for the private data. btintel introduces the btintel_data struct and store it to the private data in hdev object.

2. Added a single entry for setup and shutdown and uses the HCI_Intel_Read_Version command to identify the device, instead of relying on the USB VID and PID. The new HCI_Intel_Read_Version command is used for both legacy ROM, legacy Bootloader and TLV based bootloader.

Also, btintel_configure_setup() is added to setup the most of hdev callbacks, unless it is a transport specific functions.

After identifying the device, it calls the corresponding setup routines. These routines were copied from btusb to btintel and changes are none or very minimal.

3. Keep the state of bootloader in btintel object. The bootloader state is agnostic to the transport type, so btintel uses the btintel_data to keep track of the state in the private data section in hdev.

Also, added macros to set/clear/test flags to simplify the code.

5. Cleaned up the exported functions and make it static as much as possible if not necessary.

6. From the JfP/ThP, the operational firmware support the new TLV based HCI_Intel_Read_Version command, which confues the usage during the setup routine. So, the check for firmware variant of those legacy bootloader sku is added to use the legacy bootloader setup call.

7. All of HCI quirks for Intel devices are moved in the setup routines. There are several HCI quirks for Intel devices and some of them are for all Intel devices and some of them are for a specific devices.

The flag for HCI quirks are removed from the .driver_info, and applying HCI quirks are done in combined setup routine depends on the hw_variant.

8. Combined the setting the MSFT extension support in the combined setup routine now depends on the hw_variant.

Tedd Ho-Jeong An (12):
Bluetooth: Add support hdev to allocate private data
Bluetooth: btintel: Add combined setup and shutdown functions
Bluetooth: btintel: Refactoring setup routine for legacy ROM sku
Bluetooth: btintel: Add btintel data struct
Bluetooth: btintel: Fix the first HCI command not work with ROM device
Bluetooth: btintel: Fix the LED is not turning off immediately
Bluetooth: btintel: Add combined set_diag functions
Bluetooth: btintel: Refactoring setup routine for bootloader devices
Bluetooth: btintel: Move hci quirks to setup routine
Bluetooth: btintel: Clean the exported function to static
Bluetooth: btintel: Fix the legacy bootloader returns tlv based
version
Bluetooth: btintel: Combine setting up MSFT extension

Quoted 6 lines
drivers/bluetooth/btintel.c      | 1314 ++++++++++++++++++++++++++++--
drivers/bluetooth/btintel.h      |  119 ++-
drivers/bluetooth/btusb.c        | 1128 +------------------------
include/net/bluetooth/hci_core.h |   13 +-
net/bluetooth/hci_core.c         |   13 +-
5 files changed, 1364 insertions(+), 1223 deletions(-)

all 12 patches have been applied to bluetooth-next tree.

Regards

Marcel