4.4.279-rc1 review

This is the start of the stable review cycle for the 4.4.279 release. There are 6 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun, 08 Aug 2021 08:11:03 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.279-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.279-rc1

Ziyang Xuan <[email protected]>
can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAF

Greg Kroah-Hartman <[email protected]>
Revert "Bluetooth: Shutdown controller after workqueues are flushed or cancelled"

Pravin B Shelar <[email protected]>
net: Fix zero-copy head len calculation.

Takashi Iwai <[email protected]>
r8152: Fix potential PM refcount imbalance

Axel Lin <[email protected]>
regulator: rt5033: Fix n_voltages settings for BUCK and LDO

Goldwyn Rodrigues <[email protected]>
btrfs: mark compressed range uptodate only if all bio succeed

-------------

Diffstat:

 Makefile                           |  4 ++--
 drivers/net/usb/r8152.c            |  3 ++-
 fs/btrfs/compression.c             |  2 +-
 include/linux/mfd/rt5033-private.h |  4 ++--
 net/bluetooth/hci_core.c           | 16 ++++++++--------
 net/can/raw.c                      | 20 ++++++++++++++++++--
 net/core/skbuff.c                  |  5 ++++-
 7 files changed, 37 insertions(+), 17 deletions(-)

From: Goldwyn Rodrigues <[email protected]>

[ Upstream commit 240246f6b913b0c23733cfd2def1d283f8cc9bbe ]

In compression write endio sequence, the range which the compressed_bio writes is marked as uptodate if the last bio of the compressed (sub)bios is completed successfully. There could be previous bio which may have failed which is recorded in cb->errors.

Set the writeback range as uptodate only if cb->errors is zero, as opposed to checking only the last bio's status.

Backporting notes: in all versions up to 4.4 the last argument is always replaced by "!cb->errors".

---
 fs/btrfs/compression.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index bae05c5c75ba..92601775ec5e 100644
@@ -290,7 +290,7 @@ static void end_compressed_bio_write(struct bio *bio)
 					 cb->start,
 					 cb->start + cb->len - 1,
 					 NULL,
-					 bio->bi_error ? 0 : 1);
+					 !cb->errors);
 	cb->compressed_pages[0]->mapping = NULL;
 
 	end_compressed_writeback(inode, cb);

2.30.2

From: Axel Lin <[email protected]>

[ Upstream commit 6549c46af8551b346bcc0b9043f93848319acd5c ]

For linear regulators, the n_voltages should be (max - min) / step + 1.

Buck voltage from 1v to 3V, per step 100mV, and vout mask is 0x1f. If value is from 20 to 31, the voltage will all be fixed to 3V. And LDO also, just vout range is different from 1.2v to 3v, step is the same. If value is from 18 to 31, the voltage will also be fixed to 3v.

---
 include/linux/mfd/rt5033-private.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 1b63fc2f42d1..52d53d134f72 100644
@@ -203,13 +203,13 @@ enum rt5033_reg {
 #define RT5033_REGULATOR_BUCK_VOLTAGE_MIN		1000000U
 #define RT5033_REGULATOR_BUCK_VOLTAGE_MAX		3000000U
 #define RT5033_REGULATOR_BUCK_VOLTAGE_STEP		100000U
-#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		32
+#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		21
 
 /* RT5033 regulator LDO output voltage uV */
 #define RT5033_REGULATOR_LDO_VOLTAGE_MIN		1200000U
 #define RT5033_REGULATOR_LDO_VOLTAGE_MAX		3000000U
 #define RT5033_REGULATOR_LDO_VOLTAGE_STEP		100000U
-#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		32
+#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		19
 
 /* RT5033 regulator SAFE LDO output voltage uV */
 #define RT5033_REGULATOR_SAFE_LDO_VOLTAGE		4900000U

2.30.2

From: Takashi Iwai <[email protected]>

[ Upstream commit 9c23aa51477a37f8b56c3c40192248db0663c196 ]

rtl8152_close() takes the refcount via usb_autopm_get_interface() but it doesn't release when RTL8152_UNPLUG test hits. This may lead to the imbalance of PM refcount. This patch addresses it.

---
 drivers/net/usb/r8152.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index 5baaa8291624..ebf6d4cf09ea 100644
@@ -3159,9 +3159,10 @@ static int rtl8152_close(struct net_device *netdev)
 		tp->rtl_ops.down(tp);
 
 		mutex_unlock(&tp->control);
+	}
 
+	if (!res)
 		usb_autopm_put_interface(tp->intf);
-	}
 
 	free_all_mem(tp);
 

2.30.2

From: Pravin B Shelar <[email protected]>

[ Upstream commit a17ad0961706244dce48ec941f7e476a38c0e727 ]

In some cases skb head could be locked and entire header data is pulled from skb. When skb_zerocopy() called in such cases, following BUG is triggered. This patch fixes it by copying entire skb in such cases.
This could be optimized incase this is performance bottleneck.

---8<---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI

CPU: 2 PID: 0 Comm: swapper/2 Tainted: G           OE     5.4.0-77-generic #86-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:skb_zerocopy+0x37a/0x3a0
RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246
Call Trace:
 <IRQ>
 queue_userspace_packet+0x2af/0x5e0 [openvswitch]
 ovs_dp_upcall+0x3d/0x60 [openvswitch]
 ovs_dp_process_packet+0x125/0x150 [openvswitch]
 ovs_vport_receive+0x77/0xd0 [openvswitch]
 netdev_port_receive+0x87/0x130 [openvswitch]
 netdev_frame_hook+0x4b/0x60 [openvswitch]
 __netif_receive_skb_core+0x2b4/0xc90
 __netif_receive_skb_one_core+0x3f/0xa0
 __netif_receive_skb+0x18/0x60
 process_backlog+0xa9/0x160
 net_rx_action+0x142/0x390
 __do_softirq+0xe1/0x2d6
 irq_exit+0xae/0xb0
 do_IRQ+0x5a/0xf0
 common_interrupt+0xf/0xf

Code that triggered BUG:
int
skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)

{
        int i, j = 0;
        int plen = 0; /* length of skb->head fragment */
        int ret;
        struct page *page;
        unsigned int offset;

        BUG_ON(!from->head_frag && !hlen);

---
 net/core/skbuff.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

index 7665154c85c2..58989a5ba362 100644
@@ -2243,8 +2243,11 @@ skb_zerocopy_headlen(const struct sk_buff *from)
 
 	if (!from->head_frag ||
 	    skb_headlen(from) < L1_CACHE_BYTES ||
-	    skb_shinfo(from)->nr_frags >= MAX_SKB_FRAGS)
+	    skb_shinfo(from)->nr_frags >= MAX_SKB_FRAGS) {
 		hlen = skb_headlen(from);
+		if (!hlen)
+			hlen = from->len;
+	}
 
 	if (skb_has_frag_list(from))
 		hlen = from->len;

2.30.2

From: Greg Kroah-Hartman <[email protected]>

This reverts commit 5d16a8280078701fc03d6a0367c3251809743274 which is commit 0ea9fd001a14ebc294f112b0361a4e601551d508 upstream.

It has been reported to have problems:

	https://lore.kernel.org/linux-bluetooth/[email protected]/

---
 net/bluetooth/hci_core.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

@@ -1666,6 +1666,14 @@ int hci_dev_do_close(struct hci_dev *hde
 
 	BT_DBG("%s %p", hdev->name, hdev);
 
+	if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
+	    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+	    test_bit(HCI_UP, &hdev->flags)) {
+		/* Execute vendor specific shutdown routine */
+		if (hdev->shutdown)
+			hdev->shutdown(hdev);
+	}
+
 	cancel_delayed_work(&hdev->power_off);
 
 	hci_req_cancel(hdev, ENODEV);

@@ -1738,14 +1746,6 @@ int hci_dev_do_close(struct hci_dev *hde
 		clear_bit(HCI_INIT, &hdev->flags);
 	}
 
-	if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
-	    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
-	    test_bit(HCI_UP, &hdev->flags)) {
-		/* Execute vendor specific shutdown routine */
-		if (hdev->shutdown)
-			hdev->shutdown(hdev);
-	}
-
 	/* flush cmd  work */
 	flush_work(&hdev->cmd_work);
 

From: Ziyang Xuan <[email protected]>

commit 54f93336d000229f72c26d8a3f69dd256b744528 upstream.

We get a bug during ltp can_filter test as following.

===========================================

[60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0
[60919.265443] Oops: 0000 [#1] SMP PTI
[60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G        W         4.19.90+ #1
[60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200
[60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246
[60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007
[60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30
[60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001
[60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30
[60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000
[60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000
[60919.361151] FS:  00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000
[60919.400812] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0
[60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[60919.451608] PKRU: 55555554
[60919.463622] Call Trace:
[60919.475617]  <IRQ>
[60919.487122]  ? update_load_avg+0x89/0x5d0
[60919.498478]  ? update_load_avg+0x89/0x5d0
[60919.509822]  ? account_entity_enqueue+0xc5/0xf0
[60919.520709]  security_sock_rcv_skb+0x2a/0x40
[60919.531413]  sk_filter_trim_cap+0x47/0x1b0
[60919.542178]  ? kmem_cache_alloc+0x38/0x1b0
[60919.552444]  sock_queue_rcv_skb+0x17/0x30
[60919.562477]  raw_rcv+0x110/0x190 [can_raw]
[60919.572539]  can_rcv_filter+0xbc/0x1b0 [can]
[60919.582173]  can_receive+0x6b/0xb0 [can]
[60919.591595]  can_rcv+0x31/0x70 [can]
[60919.600783]  __netif_receive_skb_one_core+0x5a/0x80
[60919.609864]  process_backlog+0x9b/0x150
[60919.618691]  net_rx_action+0x156/0x400
[60919.627310]  ? sched_clock_cpu+0xc/0xa0
[60919.635714]  __do_softirq+0xe8/0x2e9
[60919.644161]  do_softirq_own_stack+0x2a/0x40
[60919.652154]  </IRQ>
[60919.659899]  do_softirq.part.17+0x4f/0x60
[60919.667475]  __local_bh_enable_ip+0x60/0x70
[60919.675089]  __dev_queue_xmit+0x539/0x920
[60919.682267]  ? finish_wait+0x80/0x80
[60919.689218]  ? finish_wait+0x80/0x80
[60919.695886]  ? sock_alloc_send_pskb+0x211/0x230
[60919.702395]  ? can_send+0xe5/0x1f0 [can]
[60919.708882]  can_send+0xe5/0x1f0 [can]
[60919.715037]  raw_sendmsg+0x16d/0x268 [can_raw]

It's because raw_setsockopt() concurrently with unregister_netdevice_many(). Concurrent scenario as following.

	cpu0						cpu1

raw_bind
raw_setsockopt unregister_netdevice_many
unlist_netdevice
dev_get_by_index raw_notifier
raw_enable_filters ......
can_rx_register
can_rcv_list_find(..., net->can.rx_alldev_list)

......

sock_close
raw_release(sock_a)

......

can_receive
can_rcv_filter(net->can.rx_alldev_list, ...)
raw_rcv(skb, sock_a)
BUG

After unlist_netdevice(), dev_get_by_index() return NULL in raw_setsockopt(). Function raw_enable_filters() will add sock and can_filter to net->can.rx_alldev_list. Then the sock is closed. Followed by, we sock_sendmsg() to a new vcan device use the same can_filter. Protocol stack match the old receiver whose sock has been released on net->can.rx_alldev_list in can_rcv_filter(). Function raw_rcv() uses the freed sock. UAF BUG is triggered.

We can find that the key issue is that net_device has not been protected in raw_setsockopt(). Use rtnl_lock to protect net_device in raw_setsockopt().

---
 net/can/raw.c |   20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

@@ -541,10 +541,18 @@ static int raw_setsockopt(struct socket
 				return -EFAULT;
 		}
 
+		rtnl_lock();
 		lock_sock(sk);
 
-		if (ro->bound && ro->ifindex)
+		if (ro->bound && ro->ifindex) {
 			dev = dev_get_by_index(&init_net, ro->ifindex);
+			if (!dev) {
+				if (count > 1)
+					kfree(filter);
+				err = -ENODEV;
+				goto out_fil;
+			}
+		}
 
 		if (ro->bound) {
 			/* (try to) register the new filters */

@@ -581,6 +589,7 @@ static int raw_setsockopt(struct socket
 			dev_put(dev);
 
 		release_sock(sk);
+		rtnl_unlock();
 
 		break;
 

@@ -593,10 +602,16 @@ static int raw_setsockopt(struct socket
 
 		err_mask &= CAN_ERR_MASK;
 
+		rtnl_lock();
 		lock_sock(sk);
 
-		if (ro->bound && ro->ifindex)
+		if (ro->bound && ro->ifindex) {
 			dev = dev_get_by_index(&init_net, ro->ifindex);
+			if (!dev) {
+				err = -ENODEV;
+				goto out_err;
+			}
+		}
 
 		/* remove current error mask */
 		if (ro->bound) {

@@ -618,6 +633,7 @@ static int raw_setsockopt(struct socket
 			dev_put(dev);
 
 		release_sock(sk);
+		rtnl_unlock();
 
 		break;
 

Hi!

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y

Best regards,
Pavel

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

All tests passing for Tegra ...

Test results for stable-v4.4:

    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    30 tests:	30 pass, 0 fail

Linux version: 4.4.279-rc1-g155338eca25e
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra30-cardhu-a04

Jon

Build results:

	total: 160 pass: 160 fail: 0
Qemu test results:
	total: 340 pass: 340 fail: 0

Guenter

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.4.279-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.4.y
* git commit: 155338eca25e98640866913820fbb3c0d3efed49
* git describe: v4.4.278-7-g155338eca25e
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.4.y/build/v4.4.278-7-g155338eca25e

## Regressions (compared to v4.4.278)

## Fixes (compared to v4.4.278)

## Test result summary
total: 44119, pass: 34594, fail: 366, skip: 7880, xfail: 1279

## Build Summary
* arm: 96 total, 96 passed, 0 failed
* arm64: 23 total, 23 passed, 0 failed
* i386: 13 total, 13 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 36 total, 36 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 13 total, 13 passed, 0 failed

## Test suites summary
* fwts
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org