meta-oe: libusbgx: Configure the Devices Used
PATCH 1/1 meta-oe: libusbgx: Configure the Devices Used
Add ability to configure the UDC used for specific schema. The feature is backwards compatible, so existing users don't need to change anything.
If one wants to specify which UDC is used for specific schema, for example, eth0, they can add this variable to the configuration file:
UDC_FOR_SCHEMA_eth0=f8000000.udc
If the device file exists in /sys/class/udc when the gadget is started, it will be used for this schema.
If this configuration is not present, first available device is picked.
--- meta-oe/recipes-support/libusbgx/libusbgx/gadget-start | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) mode change 100644 => 100755 meta-oe/recipes-support/libusbgx/libusbgx/gadget-start
meta-oe/recipes-support/libusbgx/libusbgx/gadget-start +6 -1
@@ -7,5 +7,10 @@ for i in $IMPORT_SCHEMAS; do done for i in $ENABLED_SCHEMAS; do - ls /sys/class/udc/ > /sys/kernel/config/usb_gadget/"$i"/UDC + configured_udc=$(eval 'echo ${UDC_FOR_SCHEMA_'"$i"'}') + if [ -n "${configured_udc}" ] && [ -e "/sys/class/udc/${configured_udc}" ]; then + echo ${configured_udc} > /sys/kernel/config/usb_gadget/"$i"/UDC + else + ls /sys/class/udc/ > /sys/kernel/config/usb_gadget/"$i"/UDC + fi done
Signature · 1 line
2.32.0.605.g8dce9f2422-goog
Quoted 9 lines · Maxim Sloyko via lists.openembedded.org
Add ability to configure the UDC used for specific schema. The feature is backwards compatible, so existing users don't need to change anything.
If one wants to specify which UDC is used for specific schema, for example,
eth0, they can add this variable to the configuration file:
Quoted 7 lines
UDC_FOR_SCHEMA_eth0=f8000000.udc
If the device file exists in
/sys/class/udcwhen the gadget is started, it will be used for this schema.If this configuration is not present, first available device is picked.
Thanks for your contribution Maxim, it looks fine, although I had to edit the commit subject line to remove meta-oe from it commit msg guidelines are here for OE
https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
Quoted 30 lines
Signed-off-by Maksym Sloyko <[email protected]>--- meta-oe/recipes-support/libusbgx/libusbgx/gadget-start | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) mode change 100644 => 100755 meta-oe/recipes-support/libusbgx/libusbgx/gadget-startmeta-oe/recipes-support/libusbgx/libusbgx/gadget-start +6
-2@@ -7,5 +7,10 @@ for i in $IMPORT_SCHEMAS; do done for i in $ENABLED_SCHEMAS; do - ls /sys/class/udc/ > /sys/kernel/config/usb_gadget/"$i"/UDC + configured_udc=$(eval 'echo ${UDC_FOR_SCHEMA_'"$i"'}') + if [ -n "${configured_udc}" ] && [ -e "/sys/class/udc/${configured_udc}" ]; then + echo ${configured_udc} > /sys/kernel/config/usb_gadget/"$i"/UDC + else + ls /sys/class/udc/ > /sys/kernel/config/usb_gadget/"$i"/UDC + fi done --2.32.0.605.g8dce9f2422-goog
Quoted 17 lines · Khem Raj
Quoted 14 lines · Maxim Sloyko via lists.openembedded.org
Add ability to configure the UDC used for specific schema. The feature is backwards compatible, so existing users don't need to change anything.
If one wants to specify which UDC is used for specific schema, for example,
eth0, they can add this variable to the configuration file:UDC_FOR_SCHEMA_eth0=f8000000.udc
If the device file exists in
/sys/class/udcwhen the gadget is started, it will be used for this schema.
Quoted 7 lines
Quoted 2 lines
If this configuration is not present, first available device is picked.
Thanks for your contribution Maxim, it looks fine, although I had to edit the commit subject line to remove meta-oe from it commit msg guidelines are here for OE
https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
Noted, thank you.
Quoted 32 lines
Quoted 32 lines
Signed-off-by Maksym Sloyko <[email protected]>--- meta-oe/recipes-support/libusbgx/libusbgx/gadget-start | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) mode change 100644 => 100755 meta-oe/recipes-support/libusbgx/libusbgx/gadget-startmeta-oe/recipes-support/libusbgx/libusbgx/gadget-start +6
-2@@ -7,5 +7,10 @@ for i in $IMPORT_SCHEMAS; do done for i in $ENABLED_SCHEMAS; do - ls /sys/class/udc/ > /sys/kernel/config/usb_gadget/"$i"/UDC + configured_udc=$(eval 'echo ${UDC_FOR_SCHEMA_'"$i"'}') + if [ -n "${configured_udc}" ] && [ -e "/sys/class/udc/${configured_udc}" ]; then + echo ${configured_udc} > /sys/kernel/config/usb_gadget/"$i"/UDC + else + ls /sys/class/udc/ > /sys/kernel/config/usb_gadget/"$i"/UDC + fi done --2.32.0.605.g8dce9f2422-goog
Signature · 1 line
-MS