media: camss: vfe: Don't use vfe->base before it's assigned
Subsystems (4)
PATCH 1/1 media: camss: vfe: Don't use vfe->base before it's assigned
vfe->ops->hw_version(vfe) being called before vfe->base has been assigned is incorrect and causes crashes.
--- drivers/media/platform/qcom/camss/camss-vfe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/platform/qcom/camss/camss-vfe.c +2 -1
@@ -1299,7 +1299,6 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,return -EINVAL ; } vfe->ops->subdev_init (dev, vfe); - vfe->ops->hw_version (vfe);/* Memory */
@@ -1309,6 +1308,8 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,return PTR_ERR (vfe->base); } + vfe->ops->hw_version (vfe); +/* Interrupt */ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
Signature · 1 line
2.30.2
Quoted 7 lines · Robert Foss
vfe->ops->hw_version(vfe)being called beforevfe->basehas been assigned is incorrect and causes crashes.Fixes b10b5334528a9 ("media: camss: vfe: Don't read hardware version needlessly")Signed-off-by Robert Foss <[email protected]>
With this patch applied on top of linux next-20210810 instead of the NULL pointer dereference I get following error on DragonBoard410c while loading kernel modules:
[ 18.480608] qcom-venus 1d00000.video-codec: Adding to iommu group 1 [ 18.536167] qcom-camss 1b0ac00.camss: Adding to iommu group 2 [ 18.600373] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
Quoted 17 lines
--- drivers/media/platform/qcom/camss/camss-vfe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/media/platform/qcom/camss/camss-vfe.c +0
-1@@ -1299,7 +1299,6 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,return -EINVAL ; } vfe->ops->subdev_init (dev, vfe); - vfe->ops->hw_version (vfe);/* Memory */
drivers/media/platform/qcom/camss/camss-vfe.c int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe, · line 1315
Quoted 8 lines
drivers/media/platform/qcom/camss/camss-vfe.c +2
-0@@ -1309,6 +1308,8 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,return PTR_ERR (vfe->base); } + vfe->ops->hw_version (vfe); +/* Interrupt */ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
Hey Marek,
Thanks for testing this.
Quoted 10 lines · Marek Szyprowski
Quoted 7 lines · Robert Foss
vfe->ops->hw_version(vfe)being called beforevfe->basehas been assigned is incorrect and causes crashes.Fixes b10b5334528a9 ("media: camss: vfe: Don't read hardware version needlessly")Signed-off-by Robert Foss <[email protected]>
Quoted 8 lines
With this patch applied on top of linux next-20210810 instead of the NULL pointer dereference I get following error on DragonBoard410c while loading kernel modules:
[ 18.480608] qcom-venus 1d00000.video-codec: Adding to iommu group 1 [ 18.536167] qcom-camss 1b0ac00.camss: Adding to iommu group 2 [ 18.600373] Internal error: synchronous external abort: 96000010 [#1]PREEMPT SMP
I'll spin a v2 asap.
Quoted 25 lines · Robert Foss
Hey Marek,
Thanks for testing this.
Quoted 18 lines · Marek Szyprowski
Quoted 7 lines · Robert Foss
vfe->ops->hw_version(vfe)being called beforevfe->basehas been assigned is incorrect and causes crashes.Fixes b10b5334528a9 ("media: camss: vfe: Don't read hardware version needlessly")Signed-off-by Robert Foss <[email protected]>With this patch applied on top of linux next-20210810 instead of the NULL pointer dereference I get following error on DragonBoard410c while loading kernel modules:
[ 18.480608] qcom-venus 1d00000.video-codec: Adding to iommu group 1 [ 18.536167] qcom-camss 1b0ac00.camss: Adding to iommu group 2 [ 18.600373] Internal error: synchronous external abort: 96000010 [#1]PREEMPT SMP
After testing this patch + linux-next[1] I'm not able to replicate the 'Internal error' above on the db410c. And I don't think it is related to this patch.
Are you seeing the same error on [1]? And are you seeing it before the b10b5334528a9 ("media: camss: vfe: Don't read hardware version needlessly") patch?
[1] https://git.linaro.org/people/robert.foss/linux.git/log/?h=camss_print_fix_v1
Rob
Hi Robert,
Quoted 22 lines · Robert Foss
Quoted 21 lines · Robert Foss
Hey Marek,
Thanks for testing this.
Quoted 16 lines · Marek Szyprowski
Quoted 7 lines · Robert Foss
vfe->ops->hw_version(vfe)being called beforevfe->basehas been assigned is incorrect and causes crashes.Fixes b10b5334528a9 ("media: camss: vfe: Don't read hardware version needlessly")Signed-off-by Robert Foss <[email protected]>With this patch applied on top of linux next-20210810 instead of the NULL pointer dereference I get following error on DragonBoard410c while loading kernel modules:
[ 18.480608] qcom-venus 1d00000.video-codec: Adding to iommu group 1 [ 18.536167] qcom-camss 1b0ac00.camss: Adding to iommu group 2 [ 18.600373] Internal error: synchronous external abort: 96000010 [#1]PREEMPT SMP
Quoted 7 lines
After testing this patch + linux-next[1] I'm not able to replicate the 'Internal error' above on the db410c. And I don't think it is related to this patch.
Are you seeing the same error on [1]? And are you seeing it before the
b10b5334528a9("media: camss: vfe: Don't read hardware version needlessly") patch?
I've checked once again on your branch. Yes, it is fully reproducible on my DragonBoard410c. On your branch I get the above synchronous external abort, while without your last patch I get Null ptr dereference.
Are you sure you have deployed the kernel modules for doing the test? This issue happens when udev triggers loading kernel modules for the detected hardware.
Here is the kernel configuration used for my tests on ARM64 based board:
# make ARCH=arm64 defconfig && ./scripts/config --set-val CMA_SIZE_MBYTES 96 -e PROVE_LOCKING -e DEBUG_ATOMIC_SLEEP -e PM_DEBUG -e PM_ADVANCED_DEBUG -d ARCH_SUNXI -d ARCH_ALPINE -d DRM_NOUVEAU -d ARCH_BCM_IPROC -d ARCH_BERLIN -d ARCH_BRCMSTB -d ARCH_LAYERSCAPE -d ARCH_LG1K -d ARCH_HISI -d ARCH_MEDIATEK -d ARCH_MVEBU -d ARCH_ROCKCHIP -d ARCH_SEATTLE -d ARCH_SYNQUACER -d ARCH_RENESAS -d ARCH_STRATIX10 -d ARCH_TEGRA -d ARCH_SPRD -d ARCH_THUNDER -d ARCH_THUNDER2 -d ARCH_UNIPHIER -d ARCH_XGENE -d ARCH_ZX -d ARCH_ZYNQMP -d HIBERNATION -d CLK_SUNXI -e BLK_DEV_RAM --set-val BLK_DEV_RAM_COUNT 4 --set-val BLK_DEV_RAM_SIZE 65536 -d CONFIG_EFI -d CONFIG_TEE
Comparing to the arm64's defconfig, I've enabled some debugging options and disabled some unused boards.
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
Quoted 34 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[ 18.480608] qcom-venus 1d00000.video-codec: Adding to iommu group 1 [ 18.536167] qcom-camss 1b0ac00.camss: Adding to iommu group 2 [ 18.600373] Internal error: synchronous external abort: 96000010 [#1]PREEMPT SMP
Quoted 7 lines
After testing this patch + linux-next[1] I'm not able to replicate the 'Internal error' above on the db410c. And I don't think it is related to this patch.
Are you seeing the same error on [1]? And are you seeing it before the
b10b5334528a9("media: camss: vfe: Don't read hardware version needlessly") patch?I've checked once again on your branch. Yes, it is fully reproducible on my DragonBoard410c. On your branch I get the above synchronous external abort, while without your last patch I get Null ptr dereference.
Are you sure you have deployed the kernel modules for doing the test? This issue happens when udev triggers loading kernel modules for the detected hardware.
Here is the kernel configuration used for my tests on ARM64 based board:
# make ARCH=arm64 defconfig && ./scripts/config --set-val CMA_SIZE_MBYTES 96 -e PROVE_LOCKING -e DEBUG_ATOMIC_SLEEP -e PM_DEBUG -e PM_ADVANCED_DEBUG -d ARCH_SUNXI -d ARCH_ALPINE -d DRM_NOUVEAU -d ARCH_BCM_IPROC -d ARCH_BERLIN -d ARCH_BRCMSTB -d ARCH_LAYERSCAPE -d ARCH_LG1K -d ARCH_HISI -d ARCH_MEDIATEK -d ARCH_MVEBU -d ARCH_ROCKCHIP -d ARCH_SEATTLE -d ARCH_SYNQUACER -d ARCH_RENESAS -d ARCH_STRATIX10 -d ARCH_TEGRA -d ARCH_SPRD -d ARCH_THUNDER -d ARCH_THUNDER2 -d ARCH_UNIPHIER -d ARCH_XGENE -d ARCH_ZX -d ARCH_ZYNQMP -d HIBERNATION -d CLK_SUNXI -e BLK_DEV_RAM --set-val BLK_DEV_RAM_COUNT 4 --set-val BLK_DEV_RAM_SIZE 65536 -d CONFIG_EFI -d CONFIG_TEE
Quoted 3 lines
Comparing to the arm64's defconfig, I've enabled some debugging options and disabled some unused boards.
I made a mistake when testing on the db410c earlier, but with it fixed I can replicate the issue. It seems to stem from the hardware not actually being powered up when the hw_version() call is being made.
Unfortunately there is no simple way to achieve the original intention of the series that reduced the frequency of the hw_version() being called, while avoiding the above issue. So let's revert to the previous behaviour for the time being.
Thank you for your help Marek! I'll submit a v2 shortly.
Rob