Skip to contentSkip to conversation

dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()

PATCH New Sasha Levin 1 participant 6 messages Aug 10, 2021

Subsystems (3)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/6 dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()

From: Yu Kuai <[email protected]>

[ Upstream commit 1da569fa7ec8cb0591c74aa3050d4ea1397778b4 ]

pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by moving the error_pm label above the pm_runtime_put() in the error path.

---
 drivers/dma/sh/usb-dmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/sh/usb-dmac.c +1 -1
index cc8fc601ed47..416057d9f0b6 100644
@@ -863,8 +863,8 @@ static int usb_dmac_probe(struct platform_device *pdev)
 
 error:
 	of_dma_controller_free(pdev->dev.of_node);
-	pm_runtime_put(&pdev->dev);
 error_pm:
+	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	return ret;
 }
Signature · 1 line
2.30.2
author maintainer
#1 lore raw

PATCH 2/6 ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218

From: Dave Gerlach <[email protected]>

[ Upstream commit 20a6b3fd8e2e2c063b25fbf2ee74d86b898e5087 ]

Based on the latest timing specifications for the TPS65218 from the data sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206 from November 2014, we must change the i2c bus speed to better fit within the minimum high SCL time required for proper i2c transfer.

When running at 400khz, measurements show that SCL spends 0.8125 uS/1.666 uS high/low which violates the requirement for minimum high period of SCL provided in datasheet Table 7.6 which is 1 uS. Switching to 100khz gives us 5 uS/5 uS high/low which both fall above the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low.

Without this patch occasionally a voltage set operation from the kernel will appear to have worked but the actual voltage reflected on the PMIC will not have updated, causing problems especially with cpufreq that may update to a higher OPP without actually raising the voltage on DCDC2, leading to a hang.

---
 arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/am43x-epos-evm.dts +1 -1
index a74b09f17a1a..e7cd99793bc6 100644
@@ -411,7 +411,7 @@ &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;
Signature · 1 line
2.30.2
author maintainer
#2 lore raw

PATCH 3/6 dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available

In reply to Sasha Levin

From: Peter Ujfalusi <[email protected]>

[ Upstream commit eda97cb095f2958bbad55684a6ca3e7d7af0176a ]

If the router_xlate can not find the controller in the available DMA devices then it should return with -EPORBE_DEFER in a same way as the of_dma_request_slave_channel() does.

The issue can be reproduced if the event router is registered before the DMA controller itself and a driver would request for a channel before the controller is registered.
In of_dma_request_slave_channel():
1. of_dma_find_controller() would find the dma_router
2. ofdma->of_dma_xlate() would fail and returned NULL
3. -ENODEV is returned as error code

with this patch we would return in this case the correct -EPROBE_DEFER and the client can try to request the channel later.

---
 drivers/dma/of-dma.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/dma/of-dma.c +7 -2
index 86c591481dfe..4a5dbf30605a 100644
@@ -68,8 +68,12 @@ static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec,
 		return NULL;
 
 	ofdma_target = of_dma_find_controller(&dma_spec_target);
-	if (!ofdma_target)
-		return NULL;
+	if (!ofdma_target) {
+		ofdma->dma_router->route_free(ofdma->dma_router->dev,
+					      route_data);
+		chan = ERR_PTR(-EPROBE_DEFER);
+		goto err;
+	}
 
 	chan = ofdma_target->of_dma_xlate(&dma_spec_target, ofdma_target);
 	if (IS_ERR_OR_NULL(chan)) {
@@ -80,6 +84,7 @@ static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec,
 		chan->route_data = route_data;
 	}
 
+err:
 	/*
 	 * Need to put the node back since the ofdma->of_dma_route_allocate
 	 * has taken it for generating the new, translated dma_spec
Signature · 1 line
2.30.2
author maintainer
#3 lore raw

PATCH 4/6 scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()

In reply to Sasha Levin

From: Harshvardhan Jha <[email protected]>

[ Upstream commit 77541f78eadfe9fdb018a7b8b69f0f2af2cf4b82 ]

The list_for_each_entry() iterator, "adapter" in this code, can never be NULL. If we exit the loop without finding the correct adapter then "adapter" points invalid memory that is an offset from the list head. This will eventually lead to memory corruption and presumably a kernel crash.

---
 drivers/scsi/megaraid/megaraid_mm.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)
drivers/scsi/megaraid/megaraid_mm.c +15 -6
index a70692779a16..34067dfd2841 100644
@@ -246,7 +246,7 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval)
 	mimd_t		mimd;
 	uint32_t	adapno;
 	int		iterator;
-
+	bool		is_found;
 
 	if (copy_from_user(&mimd, umimd, sizeof(mimd_t))) {
 		*rval = -EFAULT;
@@ -262,12 +262,16 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval)
 
 	adapter = NULL;
 	iterator = 0;
+	is_found = false;
 
 	list_for_each_entry(adapter, &adapters_list_g, list) {
-		if (iterator++ == adapno) break;
+		if (iterator++ == adapno) {
+			is_found = true;
+			break;
+		}
 	}
 
-	if (!adapter) {
+	if (!is_found) {
 		*rval = -ENODEV;
 		return NULL;
 	}
@@ -735,6 +739,7 @@ ioctl_done(uioc_t *kioc)
 	uint32_t	adapno;
 	int		iterator;
 	mraid_mmadp_t*	adapter;
+	bool		is_found;
 
 	/*
 	 * When the kioc returns from driver, make sure it still doesn't
@@ -757,19 +762,23 @@ ioctl_done(uioc_t *kioc)
 		iterator	= 0;
 		adapter		= NULL;
 		adapno		= kioc->adapno;
+		is_found	= false;
 
 		con_log(CL_ANN, ( KERN_WARNING "megaraid cmm: completed "
 					"ioctl that was timedout before\n"));
 
 		list_for_each_entry(adapter, &adapters_list_g, list) {
-			if (iterator++ == adapno) break;
+			if (iterator++ == adapno) {
+				is_found = true;
+				break;
+			}
 		}
 
 		kioc->timedout = 0;
 
-		if (adapter) {
+		if (is_found)
 			mraid_mm_dealloc_kioc( adapter, kioc );
-		}
+
 	}
 	else {
 		wake_up(&wait_q);
Signature · 1 line
2.30.2
author maintainer
#4 lore raw

PATCH 5/6 scsi: core: Avoid printing an error if target_alloc() returns -ENXIO

In reply to Sasha Levin

From: Sreekanth Reddy <[email protected]>

[ Upstream commit 70edd2e6f652f67d854981fd67f9ad0f1deaea92 ]

Avoid printing a 'target allocation failed' error if the driver target_alloc() callback function returns -ENXIO. This return value indicates that the corresponding H:C:T:L entry is empty.

Removing this error reduces the scan time if the user issues SCAN_WILD_CARD scan operation through sysfs parameter on a host with a lot of empty H:C:T:L entries.

Avoiding the printk on -ENXIO matches the behavior of the other callback functions during scanning.

---
 drivers/scsi/scsi_scan.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/scsi_scan.c +2 -1
index 647a057a9b6c..5e34c7ed483c 100644
@@ -457,7 +457,8 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
 		error = shost->hostt->target_alloc(starget);
 
 		if(error) {
-			dev_printk(KERN_ERR, dev, "target allocation failed, error %d\n", error);
+			if (error != -ENXIO)
+				dev_err(dev, "target allocation failed, error %d\n", error);
 			/* don't want scsi_target_reap to do the final
 			 * put because it will be under the host lock */
 			scsi_target_destroy(starget);
Signature · 1 line
2.30.2
author maintainer
#5 lore raw

PATCH 6/6 ARM: ixp4xx: goramo_mlr depends on old PCI driver

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 796a8c85b1216618258e08b463d3bef0d7123760 ]

When this driver is disabled, the board file fails to build, so add a dependency:

arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_preinit':
arch/arm/mach-ixp4xx/goramo_mlr.c:472:9: error: implicit declaration of function 'ixp4xx_pci_preinit'; did you mean 'iop3xx_pci_preinit'? [-Werror=implicit-function-declaration]

  472 |         ixp4xx_pci_preinit();
      |         ^~~~~~~~~~~~~~~~~~
      |         iop3xx_pci_preinit
arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_postinit':
arch/arm/mach-ixp4xx/goramo_mlr.c:481:22: error: implicit declaration of function 'ixp4xx_pci_read' [-Werror=implicit-function-declaration]
  481 |                 if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
      |                      ^~~~~~~~~~~~~~~
arch/arm/mach-ixp4xx/goramo_mlr.c:231:35: error: 'IXP4XX_UART1_BASE_PHYS' undeclared here (not in a function)
  231 |                 .start          = IXP4XX_UART1_BASE_PHYS,
      |                                   ^~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_init':
arch/arm/mach-ixp4xx/goramo_mlr.c:376:9: error: implicit declaration of function 'ixp4xx_sys_init' [-Werror=implicit-function-declaration]
  376 |         ixp4xx_sys_init();
      |         ^~~~~~~~~~~~~~~
---
 arch/arm/mach-ixp4xx/Kconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/mach-ixp4xx/Kconfig +1 -0
index c342dc4e8a45..2489b6151ace 100644
@@ -76,6 +76,7 @@ config MACH_IXDP465
 
 config MACH_GORAMO_MLR
 	bool "GORAMO Multi Link Router"
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support GORAMO
 	  MultiLink router.
Signature · 1 line
2.30.2