iio: accel: add support for ADXL355

new file mode 100644
index 000000000..ba54d6998
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
+
+maintainers:
+  - Puranjay Mohan <[email protected]>
+
+description: |
+  Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
+  both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl355.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl355
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+    description: |
+      Type for DRDY should be IRQ_TYPE_EDGE_RISING.
+      Three configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+        - DRDY
+    minItems: 1
+    maxItems: 3
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        i2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* Example for a I2C device node */
+                accelerometer@1d {
+                        compatible = "adi,adxl355";
+                        reg = <0x1d>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+                        interrupt-names = "DRDY";
+                };
+        };
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        spi {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                accelerometer@0 {
+                        compatible = "adi,adxl355";
+                        reg = <0>;
+                        spi-max-frequency = <1000000>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+                        interrupt-names = "DRDY";
+                };
+        };

index bd7aff0c1..104d22c83 100644
@@ -586,6 +586,16 @@ W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
 F:	drivers/input/misc/adxl34x.c
 
+ADXL355 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
+M:	Puranjay Mohan <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
+F:	drivers/iio/accel/adxl355.h
+F:	drivers/iio/accel/adxl355_core.c
+F:	drivers/iio/accel/adxl355_i2c.c
+F:	drivers/iio/accel/adxl355_spi.c
+
 ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
 M:	Michael Hennerich <[email protected]>
 S:	Supported

index cceda3cec..d0c45c809 100644
@@ -61,6 +61,35 @@ config ADXL345_SPI
 	  will be called adxl345_spi and you will also get adxl345_core
 	  for the core module.
 
+config ADXL355
+	tristate
+
+config ADXL355_I2C
+	tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer I2C Driver"
+	depends on I2C
+	select ADXL355
+	select REGMAP_I2C
+	help
+	  Say Y here if you want to build i2c support for the Analog Devices
+	  ADXL355 3-axis digital accelerometer.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called adxl355_i2c and you will also get adxl355_core
+	  for the core module.
+
+config ADXL355_SPI
+	tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer SPI Driver"
+	depends on SPI
+	select ADXL355
+	select REGMAP_SPI
+	help
+	  Say Y here if you want to build spi support for the Analog Devices
+	  ADXL355 3-axis digital accelerometer.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called adxl355_spi and you will also get adxl355_core
+	  for the core module.
+
 config ADXL372
 	tristate
 	select IIO_BUFFER

index 32cd1342a..0e4721d2d 100644
@@ -9,6 +9,9 @@ obj-$(CONFIG_ADIS16209) += adis16209.o
 obj-$(CONFIG_ADXL345) += adxl345_core.o
 obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
 obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
+obj-$(CONFIG_ADXL355) += adxl355_core.o
+obj-$(CONFIG_ADXL355_I2C) += adxl355_i2c.o
+obj-$(CONFIG_ADXL355_SPI) += adxl355_spi.o
 obj-$(CONFIG_ADXL372) += adxl372.o
 obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o
 obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o