Skip to contentSkip to conversation

hwmon: (pmbus/ibm-cffps) Fix write bits for LED control

PATCH Applied Brandon Wyman 2 participants 2 messages Aug 6, 2021 – Aug 12, 2021 Hardware monitoring

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 hwmon: (pmbus/ibm-cffps) Fix write bits for LED control

From: "B. J. Wyman" <[email protected]>

When doing a PMBus write for the LED control on the IBM Common Form Factor Power Supplies (ibm-cffps), the DAh command requires that bit 7 be low and bit 6 be high in order to indicate that you are truly attempting to do a write.

---
V1 -> V2: Use full name instead of initials in Signed-off-by line.

---
 drivers/hwmon/pmbus/ibm-cffps.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/hwmon/pmbus/ibm-cffps.c +3 -3
index 5668d8305b78..df712ce4b164 100644
@@ -50,9 +50,9 @@
 #define CFFPS_MFR_VAUX_FAULT			BIT(6)
 #define CFFPS_MFR_CURRENT_SHARE_WARNING		BIT(7)
 
-#define CFFPS_LED_BLINK				BIT(0)
-#define CFFPS_LED_ON				BIT(1)
-#define CFFPS_LED_OFF				BIT(2)
+#define CFFPS_LED_BLINK				(BIT(0) | BIT(6))
+#define CFFPS_LED_ON				(BIT(1) | BIT(6))
+#define CFFPS_LED_OFF				(BIT(2) | BIT(6))
 #define CFFPS_BLINK_RATE_MS			250
 
 enum {
Signature · 1 line
2.25.1
maintainer Applied
#1 lore raw
Quoted 6 lines · Brandon Wyman

When doing a PMBus write for the LED control on the IBM Common Form Factor Power Supplies (ibm-cffps), the DAh command requires that bit 7 be low and bit 6 be high in order to indicate that you are truly attempting to do a write.

Applied.

Thanks,
Guenter

Quoted 23 lines

---
V1 -> V2: Use full name instead of initials in Signed-off-by line.

---
 drivers/hwmon/pmbus/ibm-cffps.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/hwmon/pmbus/ibm-cffps.c +3 -3
index 5668d8305b78..df712ce4b164 100644
@@ -50,9 +50,9 @@
 #define CFFPS_MFR_VAUX_FAULT			BIT(6)
 #define CFFPS_MFR_CURRENT_SHARE_WARNING		BIT(7)
 
-#define CFFPS_LED_BLINK				BIT(0)
-#define CFFPS_LED_ON				BIT(1)
-#define CFFPS_LED_OFF				BIT(2)
+#define CFFPS_LED_BLINK				(BIT(0) | BIT(6))
+#define CFFPS_LED_ON				(BIT(1) | BIT(6))
+#define CFFPS_LED_OFF				(BIT(2) | BIT(6))
 #define CFFPS_BLINK_RATE_MS			250
 
 enum {