dt-bindings: tegra: Document NVIDIA Jetson TX2 NX developer kit
Subsystems (2)
PATCH 1/3 dt-bindings: tegra: Document NVIDIA Jetson TX2 NX developer kit
From: Thierry Reding <[email protected]>
The Jetson TX2 NX Developer Kit is the same form factor as Jetson Nano, but uses the more powerful Tegra186 SoC for added performance.
--- Documentation/devicetree/bindings/arm/tegra.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/tegra.yaml +1 -0
@@ -154,6 +154,7 @@ properties: - items: - enum: - nvidia,p2771-0000 + - nvidia,p3509-0000+p3636-0001 - const: nvidia,tegra186 - items: - enum:
Signature · 1 line
2.32.0
PATCH 2/3 arm64: tegra: Add PWM nodes on Tegra186
From: Thierry Reding <[email protected]>
These PWMs can be used for fan or LED backlight control. Add the device tree nodes for all existing controllers found on Tegra186 SoCs. None of these are enabled by default, which is left for the board DTS files to do when necessary.
--- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 88 ++++++++++++++++++++++++ 1 file changed, 88 insertions(+)
arch/arm64/boot/dts/nvidia/tegra186.dtsi +88 -0
@@ -548,6 +548,83 @@ gen9_i2c: i2c@31e0000 { status = "disabled"; }; + pwm1: pwm@3280000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x3280000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM1>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM1>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm2: pwm@3290000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x3290000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM2>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM2>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm3: pwm@32a0000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x32a0000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM3>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM3>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm5: pwm@32c0000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x32c0000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM5>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM5>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm6: pwm@32d0000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x32d0000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM6>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM6>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm7: pwm@32e0000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x32e0000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM7>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM7>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm8: pwm@32f0000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x32f0000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM8>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM8>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + sdmmc1: mmc@3400000 { compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03400000 0x0 0x10000>;
@@ -947,6 +1024,17 @@ gpio_aon: gpio@c2f0000 { #interrupt-cells = <2>; }; + pwm4: pwm@c340000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0xc340000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM4>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM4>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + pmc: pmc@c360000 { compatible = "nvidia,tegra186-pmc"; reg = <0 0x0c360000 0 0x10000>,
Signature · 1 line
2.32.0
PATCH 3/3 arm64: tegra: Add NVIDIA Jetson TX2 NX Developer Kit support
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
The Jetson TX2 NX Developer Kit is very similar to the Jetson Nano, but uses the more powerful Tegra186 SoC.
--- arch/arm64/boot/dts/nvidia/Makefile | 1 + .../nvidia/tegra186-p3509-0000+p3636-0001.dts | 718 ++++++++++++++++++ 2 files changed, 719 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
arch/arm64/boot/dts/nvidia/Makefile +1 -0
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p3509-0000+p3636-0001.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts new file +718 -0
718 lines not on this page · raw message
Signature · 1 line
2.32.0