ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
Subsystems (2)
PATCH 1/1 ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
From: Tao Ren <[email protected]>
Add some comments to explain the purpose of "mdio1" controller: it's connected to the MDC/MDIO interface of the on-board management switch.
Signed-off-by Tao Ren <[email protected]>
--- arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts +5 -0
@@ -96,6 +96,11 @@ status = "okay"; }; +/* + * "mdio1" is connected to the MDC/MDIO interface of the on-board + * management switch (whose ports are connected to BMC, Host and front + * panel ethernet port). + */ &mdio1 { status = "okay"; };
Signature · 1 line
2.17.1
Quoted 7 lines · On Fri, 13 Aug 2021 at 06:19, <[email protected]> wrote:
From: Tao Ren <[email protected]>
Add some comments to explain the purpose of "mdio1" controller: it's connected to the MDC/MDIO interface of the on-board management switch.
Signed-off-by Tao Ren <[email protected]>
Thanks, applied.
Quoted 23 lines
--- arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts | 5 +++++ 1 file changed, 5 insertions(+)arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts +5
-1@@ -96,6 +96,11 @@ status = "okay"; }; +/* + * "mdio1" is connected to the MDC/MDIO interface of the on-board + * management switch (whose ports are connected to BMC, Host and front + * panel ethernet port). + */ &mdio1 { status = "okay"; }; --2.17.1