Skip to contentSkip to conversation

Add sensor driver support for the ov13b10 camera.

PATCH Superseded Arec Kao 2 participants 3 messages Aug 13, 2021 – Aug 17, 2021

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Arec Kao

author maintainer
#0 lore raw

PATCH v2 1/1 Add sensor driver support for the ov13b10 camera.

This driver supports following features:

- phase detection auto focus (PDAF)
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- 4208x3120 at 30FPS
- 2080x1170 at 60FPS

---
 drivers/media/i2c/Kconfig   |   10 +
 drivers/media/i2c/Makefile  |    1 +
 drivers/media/i2c/ov13b10.c | 1415 +++++++++++++++++++++++++++++++++++
 3 files changed, 1426 insertions(+)
 create mode 100644 drivers/media/i2c/ov13b10.c
drivers/media/i2c/Kconfig +10 -0
index 08feb3e8c1bf..ebd90b7dafd9 100644
@@ -1186,6 +1186,16 @@ config VIDEO_OV13858
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV13858 camera.
 
+config VIDEO_OV13B10
+	tristate "OmniVision OV13B10 sensor support"
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the OmniVision
+	  OV13B10 camera.
+
 config VIDEO_VS6624
 	tristate "ST VS6624 sensor support"
 	depends on VIDEO_V4L2 && I2C
drivers/media/i2c/Makefile +1 -0
index 83268f20aa3a..5ac8d639e5ca 100644
@@ -89,6 +89,7 @@ obj-$(CONFIG_VIDEO_OV9640) += ov9640.o
 obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
 obj-$(CONFIG_VIDEO_OV9734) += ov9734.o
 obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
+obj-$(CONFIG_VIDEO_OV13B10) += ov13b10.o
 obj-$(CONFIG_VIDEO_MT9M001) += mt9m001.o
 obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
 obj-$(CONFIG_VIDEO_MT9M111) += mt9m111.o
drivers/media/i2c/ov13b10.c new file +1415 -0

1,415 lines not on this page · raw message

Signature · 1 line
2.17.1
maintainer
#1 lore raw

Hi Arec,

Quoted 9 lines · Arec Kao

This driver supports following features:

- phase detection auto focus (PDAF)
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- 4208x3120 at 30FPS
- 2080x1170 at 60FPS

Forgot a few things on v2... I noticed the driver doesn't check the link frequency used by the driver at the moment is valid for the given board. Could you add that?

See e.g. drivers/media/i2c/imx319.c for an example.

Also an entry in MAINTAINERS is needed, see e.g. one for IMX319 again.

Signature · 3 lines
Kind regards,

Sakari Ailus
author maintainer
#2 lore raw

Hi Sakari,

Thank you for, I was not aware of that! Will add this to this driver.

Thanks,
BRs,
Arec Kao

-----Original Message-----
From: Sakari Ailus <[email protected]>
Sent: Friday, August 13, 2021 10:31 PM
To: Kao, Arec <[email protected]>
Cc: [email protected]; Yeh, Andy <[email protected]>; Chang, Wei Shun <[email protected]>
Subject: Re: [PATCH v2] Add sensor driver support for the ov13b10 camera.

Hi Arec,

Quoted 9 lines · Arec Kao

This driver supports following features:

- phase detection auto focus (PDAF)
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- 4208x3120 at 30FPS
- 2080x1170 at 60FPS

Forgot a few things on v2... I noticed the driver doesn't check the link frequency used by the driver at the moment is valid for the given board. Could you add that?

See e.g. drivers/media/i2c/imx319.c for an example.

Also an entry in MAINTAINERS is needed, see e.g. one for IMX319 again.

--
Kind regards,

Sakari Ailus