staging: greybus: Convert uart.c from IDR to XArray
Subsystems (3)
PATCH 1/1 staging: greybus: Convert uart.c from IDR to XArray
Convert greybus/uart.c from IDR to XArray. The abstract data type XArray is more memory-efficient, parallelisable, and cache friendly. It takes advantage of RCU to perform lookups without locking. Furthermore, IDR is deprecated because XArray has a better (cleaner and more consistent) API.
--- drivers/staging/greybus/uart.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
drivers/staging/greybus/uart.c +14 -14
@@ -22,7 +22,7 @@#include <linux/serial.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> -#include <linux/idr.h> +#include <linux/xarray.h> #include <linux/fs.h> #include <linux/kdev_t.h> #include <linux/kfifo.h>
@@ -33,6 +33,7 @@#include "gbphy.h" #define GB_NUM_MINORS 16/* 16 is more than enough */ +#define GB_RANGE_MINORS XA_LIMIT(0, GB_NUM_MINORS)#define GB_NAME "ttyGB"#define GB_UART_WRITE_FIFO_SIZE PAGE_SIZE
@@ -67,7 +68,7 @@ struct gb_tty { };static struct tty_driver *gb_tty_driver; -static DEFINE_IDR (tty_minors); +static DEFINE_XARRAY (tty_minors);static DEFINE_MUTEX (table_lock);static int gb_uart_receive_data_handler (struct gb_operation *op)
@@ -77,6 +78,7 @@ static int gb_uart_receive_data_handler(struct gb_operation *op)struct tty_port *port = &gb_tty->port;struct gb_message *request = op->request;struct gb_uart_recv_data_request *receive_data; +u16 recv_data_size;int count;unsigned long tty_flags =TTY_NORMAL ;
@@ -341,8 +343,8 @@ static struct gb_tty *get_gb_by_minor(unsigned int minor) {struct gb_tty *gb_tty; -mutex_lock (&table_lock); - gb_tty =idr_find (&tty_minors, minor); +xa_lock (&table_lock); + gb_tty =xa_load (&tty_minors, minor);if (gb_tty) {mutex_lock (&gb_tty->mutex);if (gb_tty->disconnected) {
@@ -353,19 +355,19 @@ static struct gb_tty *get_gb_by_minor(unsigned int minor)mutex_unlock (&gb_tty->mutex); } } -mutex_unlock (&table_lock); +xa_unlock (&table_lock);return gb_tty; }static int alloc_minor (struct gb_tty *gb_tty) {int minor; +int ret; -mutex_lock (&table_lock); - minor =idr_alloc (&tty_minors, gb_tty,0 ,GB_NUM_MINORS ,GFP_KERNEL ); -mutex_unlock (&table_lock); -if (minor >=0 ) - gb_tty->minor = minor; + ret =xa_alloc (&tty_minors, &minor, gb_tty,GB_RANGE_MINORS ,GFP_KERNEL ); +if (ret) +return ret; + gb_tty->minor = minor;return minor; }
@@ -374,9 +376,7 @@ static void release_minor(struct gb_tty *gb_tty)int minor = gb_tty->minor; gb_tty->minor =0 ;/* Maybe should use an invalid value instead */ -mutex_lock (&table_lock); -idr_remove (&tty_minors, minor); -mutex_unlock (&table_lock); +xa_erase (&tty_minors, minor); }static int gb_tty_install (struct tty_driver *driver,struct tty_struct *tty)
@@ -982,7 +982,7 @@ static void gb_tty_exit(void) {tty_unregister_driver (gb_tty_driver);put_tty_driver (gb_tty_driver); -idr_destroy (&tty_minors); +xa_destroy (&tty_minors); }static const struct gbphy_device_id gb_uart_id_table[] = {
Signature · 1 line
2.32.0
kernel test robot
build botThank you for the patch! Yet something to improve:
Hi "Fabio,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on staging/staging-testing]
url: https://github.com/0day-ci/linux/commits/Fabio-M-De-Francesco/staging-greybus-Convert-uart-c-from-IDR-to-XArray/20210814-225807 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git 0bd35146642bdc56f1b87d75f047b1c92bd2bd39 config: riscv-randconfig-r042-20210814 (attached as .config) compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project 1f7b25ea76a925aca690da28de9d78db7ca99d0c)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/901c5fde0540c767590bce646219889730c4a41b
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Fabio-M-De-Francesco/staging-greybus-Convert-uart-c-from-IDR-to-XArray/20210814-225807 git checkout 901c5fde0540c767590bce646219889730c4a41b
# save the attached .config to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross O=build_dir ARCH=riscv SHELL=/bin/bash drivers/staging/greybus/
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
>> drivers/staging/greybus/uart.c:346:2: error: no member named 'xa_lock' in 'struct mutex'
xa_lock(&table_lock);
^~~~~~~~~~~~~~~~~~~~
include/linux/xarray.h:530:39: note: expanded from macro 'xa_lock'
#define xa_lock(xa) spin_lock(&(xa)->xa_lock)
~~~~ ^
drivers/staging/greybus/uart.c:358:2: error: no member named 'xa_lock' in 'struct mutex'
xa_unlock(&table_lock);
^~~~~~~~~~~~~~~~~~~~~~
include/linux/xarray.h:531:43: note: expanded from macro 'xa_unlock'
#define xa_unlock(xa) spin_unlock(&(xa)->xa_lock)
~~~~ ^2 errors generated.
vim +346 drivers/staging/greybus/uart.c
341
342 static struct gb_tty *get_gb_by_minor(unsigned int minor)
343 {
344 struct gb_tty *gb_tty;
345
> 346 xa_lock(&table_lock);
347 gb_tty = xa_load(&tty_minors, minor);
348 if (gb_tty) {
349 mutex_lock(&gb_tty->mutex);
350 if (gb_tty->disconnected) {
351 mutex_unlock(&gb_tty->mutex);
352 gb_tty = NULL;
353 } else {
354 tty_port_get(&gb_tty->port);
355 mutex_unlock(&gb_tty->mutex);
356 }
357 }
358 xa_unlock(&table_lock);
359 return gb_tty;
360 }
361
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
kernel test robot
build botThank you for the patch! Yet something to improve:
Hi "Fabio,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on staging/staging-testing]
url: https://github.com/0day-ci/linux/commits/Fabio-M-De-Francesco/staging-greybus-Convert-uart-c-from-IDR-to-XArray/20210814-225807 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git 0bd35146642bdc56f1b87d75f047b1c92bd2bd39 config: i386-randconfig-s002-20210814 (attached as .config) compiler: gcc-9 (Debian 9.3.0-22) 9.3.0 reproduce: # apt-get install sparse # sparse version: v0.6.3-348-gf0e6938b-dirty # https://github.com/0day-ci/linux/commit/901c5fde0540c767590bce646219889730c4a41b git remote add linux-review https://github.com/0day-ci/linux git fetch --no-tags linux-review Fabio-M-De-Francesco/staging-greybus-Convert-uart-c-from-IDR-to-XArray/20210814-225807 git checkout 901c5fde0540c767590bce646219889730c4a41b # save the attached .config to linux build tree make W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=i386 SHELL=/bin/bash drivers/staging/greybus/
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
In file included from include/linux/radix-tree.h:19,
from include/linux/idr.h:15,
from include/linux/kernfs.h:13, from include/linux/sysfs.h:16,
from include/linux/kobject.h:20, from include/linux/module.h:21, from drivers/staging/greybus/uart.c:15:
drivers/staging/greybus/uart.c: In function 'get_gb_by_minor':
>> include/linux/xarray.h:530:39: error: 'struct mutex' has no member named 'xa_lock'; did you mean 'wait_lock'?
530 | #define xa_lock(xa) spin_lock(&(xa)->xa_lock)
| ^~~~~~~
drivers/staging/greybus/uart.c:346:2: note: in expansion of macro 'xa_lock'
346 | xa_lock(&table_lock);
| ^~~~~~~
include/linux/xarray.h:531:43: error: 'struct mutex' has no member named 'xa_lock'; did you mean 'wait_lock'?
531 | #define xa_unlock(xa) spin_unlock(&(xa)->xa_lock)
| ^~~~~~~
drivers/staging/greybus/uart.c:358:2: note: in expansion of macro 'xa_unlock'
358 | xa_unlock(&table_lock);
| ^~~~~~~~~vim +530 include/linux/xarray.h
9b89a035514468 Matthew Wilcox 2017-11-10 420 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 421) /** 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 422) * xa_for_each_range() - Iterate over a portion of an XArray. 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 423) * @xa: XArray. 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 424) * @index: Index of @entry. 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 425) * @entry: Entry retrieved from array. 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 426) * @start: First index to retrieve from array. 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 427) * @last: Last index to retrieve from array. 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 428) * 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 429) * During the iteration, @entry will have the value of the entry stored 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 430) * in @xa at @index. You may modify @index during the iteration if you 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 431) * want to skip or reprocess indices. It is safe to modify the array 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 432) * during the iteration. At the end of the iteration, @entry will be set 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 433) * to NULL and @index will have a value less than or equal to max. 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 434) * 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 435) * xa_for_each_range() is O(n.log(n)) while xas_for_each() is O(n). You have 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 436) * to handle your own locking with xas_for_each(), and if you have to unlock 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 437) * after each iteration, it will also end up being O(n.log(n)). 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 438) * xa_for_each_range() will spin if it hits a retry entry; if you intend to 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 439) * see retry entries, you should use the xas_for_each() iterator instead. 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 440) * The xas_for_each() iterator will expand into more inline code than 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 441) * xa_for_each_range(). 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 442) * 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 443) * Context: Any context. Takes and releases the RCU lock. 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 444) */ 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 445) #define xa_for_each_range(xa, index, entry, start, last) \ 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 446) for (index = start, \ 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 447) entry = xa_find(xa, &index, last, XA_PRESENT); \ 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 448) entry; \ 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 449) entry = xa_find_after(xa, &index, last, XA_PRESENT)) 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 450) b803b42823d0d9 Matthew Wilcox 2017-11-14 451 /** 4a31896c5b5a27 Matthew Wilcox 2018-12-17 452 * xa_for_each_start() - Iterate over a portion of an XArray. b803b42823d0d9 Matthew Wilcox 2017-11-14 453 * @xa: XArray. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 454 * @index: Index of @entry. b803b42823d0d9 Matthew Wilcox 2017-11-14 455 * @entry: Entry retrieved from array. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 456 * @start: First index to retrieve from array. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 457 * 4a31896c5b5a27 Matthew Wilcox 2018-12-17 458 * During the iteration, @entry will have the value of the entry stored 4a31896c5b5a27 Matthew Wilcox 2018-12-17 459 * in @xa at @index. You may modify @index during the iteration if you 4a31896c5b5a27 Matthew Wilcox 2018-12-17 460 * want to skip or reprocess indices. It is safe to modify the array 4a31896c5b5a27 Matthew Wilcox 2018-12-17 461 * during the iteration. At the end of the iteration, @entry will be set 4a31896c5b5a27 Matthew Wilcox 2018-12-17 462 * to NULL and @index will have a value less than or equal to max. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 463 * 4a31896c5b5a27 Matthew Wilcox 2018-12-17 464 * xa_for_each_start() is O(n.log(n)) while xas_for_each() is O(n). You have 4a31896c5b5a27 Matthew Wilcox 2018-12-17 465 * to handle your own locking with xas_for_each(), and if you have to unlock 4a31896c5b5a27 Matthew Wilcox 2018-12-17 466 * after each iteration, it will also end up being O(n.log(n)). 4a31896c5b5a27 Matthew Wilcox 2018-12-17 467 * xa_for_each_start() will spin if it hits a retry entry; if you intend to 4a31896c5b5a27 Matthew Wilcox 2018-12-17 468 * see retry entries, you should use the xas_for_each() iterator instead. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 469 * The xas_for_each() iterator will expand into more inline code than 4a31896c5b5a27 Matthew Wilcox 2018-12-17 470 * xa_for_each_start(). 4a31896c5b5a27 Matthew Wilcox 2018-12-17 471 * 4a31896c5b5a27 Matthew Wilcox 2018-12-17 472 * Context: Any context. Takes and releases the RCU lock. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 473 */ 4a31896c5b5a27 Matthew Wilcox 2018-12-17 474 #define xa_for_each_start(xa, index, entry, start) \ 00ed452c210a0b Matthew Wilcox (Oracle 2020-01-12 475) xa_for_each_range(xa, index, entry, start, ULONG_MAX) 4a31896c5b5a27 Matthew Wilcox 2018-12-17 476 4a31896c5b5a27 Matthew Wilcox 2018-12-17 477 /** 4a31896c5b5a27 Matthew Wilcox 2018-12-17 478 * xa_for_each() - Iterate over present entries in an XArray. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 479 * @xa: XArray. b803b42823d0d9 Matthew Wilcox 2017-11-14 480 * @index: Index of @entry. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 481 * @entry: Entry retrieved from array. b803b42823d0d9 Matthew Wilcox 2017-11-14 482 * 4a31896c5b5a27 Matthew Wilcox 2018-12-17 483 * During the iteration, @entry will have the value of the entry stored 4a31896c5b5a27 Matthew Wilcox 2018-12-17 484 * in @xa at @index. You may modify @index during the iteration if you want 4a31896c5b5a27 Matthew Wilcox 2018-12-17 485 * to skip or reprocess indices. It is safe to modify the array during the 4a31896c5b5a27 Matthew Wilcox 2018-12-17 486 * iteration. At the end of the iteration, @entry will be set to NULL and 4a31896c5b5a27 Matthew Wilcox 2018-12-17 487 * @index will have a value less than or equal to max. b803b42823d0d9 Matthew Wilcox 2017-11-14 488 * b803b42823d0d9 Matthew Wilcox 2017-11-14 489 * xa_for_each() is O(n.log(n)) while xas_for_each() is O(n). You have b803b42823d0d9 Matthew Wilcox 2017-11-14 490 * to handle your own locking with xas_for_each(), and if you have to unlock b803b42823d0d9 Matthew Wilcox 2017-11-14 491 * after each iteration, it will also end up being O(n.log(n)). xa_for_each() b803b42823d0d9 Matthew Wilcox 2017-11-14 492 * will spin if it hits a retry entry; if you intend to see retry entries, b803b42823d0d9 Matthew Wilcox 2017-11-14 493 * you should use the xas_for_each() iterator instead. The xas_for_each() b803b42823d0d9 Matthew Wilcox 2017-11-14 494 * iterator will expand into more inline code than xa_for_each(). b803b42823d0d9 Matthew Wilcox 2017-11-14 495 * b803b42823d0d9 Matthew Wilcox 2017-11-14 496 * Context: Any context. Takes and releases the RCU lock. b803b42823d0d9 Matthew Wilcox 2017-11-14 497 */ 4a31896c5b5a27 Matthew Wilcox 2018-12-17 498 #define xa_for_each(xa, index, entry) \ 4a31896c5b5a27 Matthew Wilcox 2018-12-17 499 xa_for_each_start(xa, index, entry, 0) 4a31896c5b5a27 Matthew Wilcox 2018-12-17 500 4a31896c5b5a27 Matthew Wilcox 2018-12-17 501 /** 4a31896c5b5a27 Matthew Wilcox 2018-12-17 502 * xa_for_each_marked() - Iterate over marked entries in an XArray. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 503 * @xa: XArray. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 504 * @index: Index of @entry. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 505 * @entry: Entry retrieved from array. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 506 * @filter: Selection criterion. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 507 * 4a31896c5b5a27 Matthew Wilcox 2018-12-17 508 * During the iteration, @entry will have the value of the entry stored 4a31896c5b5a27 Matthew Wilcox 2018-12-17 509 * in @xa at @index. The iteration will skip all entries in the array 4a31896c5b5a27 Matthew Wilcox 2018-12-17 510 * which do not match @filter. You may modify @index during the iteration 4a31896c5b5a27 Matthew Wilcox 2018-12-17 511 * if you want to skip or reprocess indices. It is safe to modify the array 4a31896c5b5a27 Matthew Wilcox 2018-12-17 512 * during the iteration. At the end of the iteration, @entry will be set to 4a31896c5b5a27 Matthew Wilcox 2018-12-17 513 * NULL and @index will have a value less than or equal to max. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 514 * 4a31896c5b5a27 Matthew Wilcox 2018-12-17 515 * xa_for_each_marked() is O(n.log(n)) while xas_for_each_marked() is O(n). 4a31896c5b5a27 Matthew Wilcox 2018-12-17 516 * You have to handle your own locking with xas_for_each(), and if you have 4a31896c5b5a27 Matthew Wilcox 2018-12-17 517 * to unlock after each iteration, it will also end up being O(n.log(n)). 4a31896c5b5a27 Matthew Wilcox 2018-12-17 518 * xa_for_each_marked() will spin if it hits a retry entry; if you intend to 4a31896c5b5a27 Matthew Wilcox 2018-12-17 519 * see retry entries, you should use the xas_for_each_marked() iterator 4a31896c5b5a27 Matthew Wilcox 2018-12-17 520 * instead. The xas_for_each_marked() iterator will expand into more inline 4a31896c5b5a27 Matthew Wilcox 2018-12-17 521 * code than xa_for_each_marked(). 4a31896c5b5a27 Matthew Wilcox 2018-12-17 522 * 4a31896c5b5a27 Matthew Wilcox 2018-12-17 523 * Context: Any context. Takes and releases the RCU lock. 4a31896c5b5a27 Matthew Wilcox 2018-12-17 524 */ 4a31896c5b5a27 Matthew Wilcox 2018-12-17 525 #define xa_for_each_marked(xa, index, entry, filter) \ 4a31896c5b5a27 Matthew Wilcox 2018-12-17 526 for (index = 0, entry = xa_find(xa, &index, ULONG_MAX, filter); \ 4a31896c5b5a27 Matthew Wilcox 2018-12-17 527 entry; entry = xa_find_after(xa, &index, ULONG_MAX, filter)) b803b42823d0d9 Matthew Wilcox 2017-11-14 528 f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 529 #define xa_trylock(xa) spin_trylock(&(xa)->xa_lock) f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 @530 #define xa_lock(xa) spin_lock(&(xa)->xa_lock) f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 531 #define xa_unlock(xa) spin_unlock(&(xa)->xa_lock) f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 532 #define xa_lock_bh(xa) spin_lock_bh(&(xa)->xa_lock) f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 533 #define xa_unlock_bh(xa) spin_unlock_bh(&(xa)->xa_lock) f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 534 #define xa_lock_irq(xa) spin_lock_irq(&(xa)->xa_lock) f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 535 #define xa_unlock_irq(xa) spin_unlock_irq(&(xa)->xa_lock) f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 536 #define xa_lock_irqsave(xa, flags) \ f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 537 spin_lock_irqsave(&(xa)->xa_lock, flags) f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 538 #define xa_unlock_irqrestore(xa, flags) \ f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 539 spin_unlock_irqrestore(&(xa)->xa_lock, flags) 82a958497dc912 Matthew Wilcox (Oracle 2020-01-17 540) #define xa_lock_nested(xa, subclass) \ 82a958497dc912 Matthew Wilcox (Oracle 2020-01-17 541) spin_lock_nested(&(xa)->xa_lock, subclass) 82a958497dc912 Matthew Wilcox (Oracle 2020-01-17 542) #define xa_lock_bh_nested(xa, subclass) \ 82a958497dc912 Matthew Wilcox (Oracle 2020-01-17 543) spin_lock_bh_nested(&(xa)->xa_lock, subclass) 82a958497dc912 Matthew Wilcox (Oracle 2020-01-17 544) #define xa_lock_irq_nested(xa, subclass) \ 82a958497dc912 Matthew Wilcox (Oracle 2020-01-17 545) spin_lock_irq_nested(&(xa)->xa_lock, subclass) 82a958497dc912 Matthew Wilcox (Oracle 2020-01-17 546) #define xa_lock_irqsave_nested(xa, flags, subclass) \ 82a958497dc912 Matthew Wilcox (Oracle 2020-01-17 547) spin_lock_irqsave_nested(&(xa)->xa_lock, flags, subclass) f6bb2a2c0b81c4 Matthew Wilcox 2018-04-10 548
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org