fuse,virtiofs: support per-file DAX
Subsystems (5)
v4 cover fuse,virtiofs: support per-file DAX
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Any comment is welcome.
[1] commit 9cb20f94afcd ("fs/ext4: Make DAX mount option a tri-state")
[2] commit 02beb2686ff9 ("fs/xfs: Make DAX mount option a tri-state")
changes since v3:
- bug fix (patch 6): s/"IS_DAX(inode) != newdax"/"!!IS_DAX(inode) != newdax"
- during FUSE_INIT, advertise capability for per-file DAX only when mounted as "-o dax=inode" (patch 4)
changes since v2:
- modify fuse_show_options() accordingly to make it compatible with new tri-state mount option (patch 2)
- extract FUSE protocol changes into one seperate patch (patch 3)
- FUSE server/client need to negotiate if they support per-file DAX (patch 4)
- extract DONT_CACHE logic into patch 6/7
v3: https://www.spinics.net/lists/linux-fsdevel/msg200852.html
v2: https://www.spinics.net/lists/linux-fsdevel/msg199584.html
v1: https://www.spinics.net/lists/linux-virtualization/msg51008.html
Jeffle Xu (8):
fuse: add fuse_should_enable_dax() helper
fuse: Make DAX mount option a tri-state
fuse: support per-file DAX
fuse: negotiate if server/client supports per-file DAX
fuse: enable per-file DAX
fuse: mark inode DONT_CACHE when per-file DAX indication changes
fuse: support changing per-file DAX flag inside guest
fuse: show '-o dax=inode' option only when FUSE server supports
fs/fuse/dax.c | 32 +++++++++++++++++++++++++++++--- fs/fuse/file.c | 4 ++-- fs/fuse/fuse_i.h | 22 ++++++++++++++++++---- fs/fuse/inode.c | 27 +++++++++++++++++++-------- fs/fuse/ioctl.c | 15 +++++++++++++-- fs/fuse/virtio_fs.c | 16 ++++++++++++++-- include/uapi/linux/fuse.h | 9 ++++++++- 7 files changed, 103 insertions(+), 22 deletions(-)
Signature · 1 line
2.27.0
PATCH v4 1/8 fuse: add fuse_should_enable_dax() helper
This is in prep for following per-file DAX checking.
--- fs/fuse/dax.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
fs/fuse/dax.c +9 -1
@@ -1336,11 +1336,19 @@ static const struct address_space_operations fuse_dax_file_aops = { .invalidatepage = noop_invalidatepage, }; -void fuse_dax_inode_init (struct inode *inode) +static bool fuse_should_enable_dax (struct inode *inode) {struct fuse_conn *fc =get_fuse_conn (inode);if (!fc->dax) +return false; + +return true; +} + +void fuse_dax_inode_init (struct inode *inode) +{ +if (!fuse_should_enable_dax (inode))return ; inode->i_flags |=S_DAX ;
Signature · 1 line
2.27.0
PATCH v4 2/8 fuse: Make DAX mount option a tri-state
In reply to Jeffle XuWe add 'always', 'never', and 'inode' (default). '-o dax' continues to operate the same which is equivalent to 'always'.
By the time this patch is applied, 'inode' mode is actually equal to 'always' mode, before the per-file DAX flag is introduced in the following patch.
--- fs/fuse/dax.c | 9 +++++++-- fs/fuse/fuse_i.h | 14 ++++++++++++-- fs/fuse/inode.c | 10 +++++++--- fs/fuse/virtio_fs.c | 16 ++++++++++++++-- 4 files changed, 40 insertions(+), 9 deletions(-)
fs/fuse/dax.c +7 -2
@@ -1288,11 +1288,14 @@ static int fuse_dax_mem_range_init(struct fuse_conn_dax *fcd)return ret; } -int fuse_dax_conn_alloc (struct fuse_conn *fc,struct dax_device *dax_dev) +int fuse_dax_conn_alloc (struct fuse_conn *fc,enum fuse_dax_mode dax_mode, +struct dax_device *dax_dev) {struct fuse_conn_dax *fcd;int err; + fc->dax_mode = dax_mode; +if (!dax_dev)return 0 ;
@@ -1339,8 +1342,10 @@ static const struct address_space_operations fuse_dax_file_aops = {static bool fuse_should_enable_dax (struct inode *inode) {struct fuse_conn *fc =get_fuse_conn (inode); +unsigned int dax_mode = fc->dax_mode; -if (!fc->dax) +/* If 'dax=always/inode', fc->dax couldn't be NULL */ +if (dax_mode ==FUSE_DAX_NEVER )return false;return true;
fs/fuse/fuse_i.h +12 -2
@@ -487,6 +487,12 @@ struct fuse_dev {struct list_head entry; }; +enum fuse_dax_mode { +FUSE_DAX_INODE , +FUSE_DAX_ALWAYS , +FUSE_DAX_NEVER , +}; +struct fuse_fs_context {int fd;unsigned int rootmode;
@@ -503,7 +509,7 @@ struct fuse_fs_context { bool no_control:1; bool no_force_umount:1; bool legacy_opts_show:1; - bool dax:1; +enum fuse_dax_mode dax_mode;unsigned int max_read;unsigned int blksize;const char *subtype;
@@ -801,6 +807,9 @@ struct fuse_conn {struct list_head devices;#ifdef CONFIG_FUSE_DAX +/* dax mode: FUSE_DAX_* (always, never or per-file) */ +enum fuse_dax_mode dax_mode; +/* Dax specific conn data, non-NULL if DAX is enabled */ struct fuse_conn_dax *dax;#endif
@@ -1242,7 +1251,8 @@ ssize_t fuse_dax_read_iter(struct kiocb *iocb, struct iov_iter *to);ssize_t fuse_dax_write_iter (struct kiocb *iocb,struct iov_iter *from);int fuse_dax_mmap (struct file *file,struct vm_area_struct *vma);int fuse_dax_break_layouts (struct inode *inode,u64 dmap_start,u64 dmap_end); -int fuse_dax_conn_alloc (struct fuse_conn *fc,struct dax_device *dax_dev); +int fuse_dax_conn_alloc (struct fuse_conn *fc,enum fuse_dax_mode mode, +struct dax_device *dax_dev);void fuse_dax_conn_free (struct fuse_conn *fc);bool fuse_dax_inode_alloc (struct super_block *sb,struct fuse_inode *fi);void fuse_dax_inode_init (struct inode *inode);
fs/fuse/inode.c +7 -3
@@ -690,8 +690,12 @@ static int fuse_show_options(struct seq_file *m, struct dentry *root)seq_printf (m,",blksize=%lu" , sb->s_blocksize); }#ifdef CONFIG_FUSE_DAX -if (fc->dax) -seq_puts (m,",dax" ); +if (fc->dax_mode ==FUSE_DAX_ALWAYS ) +seq_puts (m,",dax=always" ); +else if (fc->dax_mode ==FUSE_DAX_NEVER ) +seq_puts (m,",dax=never" ); +else if (fc->dax_mode ==FUSE_DAX_INODE ) +seq_puts (m,",dax=inode" );#endif return 0 ;
@@ -1434,7 +1438,7 @@ int fuse_fill_super_common(struct super_block *sb, struct fuse_fs_context *ctx) sb->s_subtype = ctx->subtype; ctx->subtype =NULL ;if (IS_ENABLED (CONFIG_FUSE_DAX )) { - err =fuse_dax_conn_alloc (fc, ctx->dax_dev); + err =fuse_dax_conn_alloc (fc, ctx->dax_mode, ctx->dax_dev);if (err) goto err; }
fs/fuse/virtio_fs.c +14 -2
@@ -88,12 +88,21 @@ struct virtio_fs_req_work {static int virtio_fs_enqueue_req (struct virtio_fs_vq *fsvq,struct fuse_req *req,bool in_flight); +static const struct constant_table dax_param_enums[] = { + {"inode" ,FUSE_DAX_INODE }, + {"always" ,FUSE_DAX_ALWAYS }, + {"never" ,FUSE_DAX_NEVER }, + {} +}; +enum {OPT_DAX , +OPT_DAX_ENUM , };static const struct fs_parameter_spec virtio_fs_parameters[] = {fsparam_flag ("dax" ,OPT_DAX ), +fsparam_enum ("dax" ,OPT_DAX_ENUM , dax_param_enums), {} };
@@ -110,7 +119,10 @@ static int virtio_fs_parse_param(struct fs_context *fc,switch (opt) {case OPT_DAX : - ctx->dax =1 ; + ctx->dax_mode =FUSE_DAX_ALWAYS ; +break ; +case OPT_DAX_ENUM : + ctx->dax_mode = result.uint_32;break ;default :return -EINVAL ;
@@ -1323,7 +1335,7 @@ static int virtio_fs_fill_super(struct super_block *sb, struct fs_context *fsc)/* virtiofs allocates and installs its own fuse devices */ ctx->fudptr =NULL ; -if (ctx->dax) { +if (ctx->dax_mode !=FUSE_DAX_NEVER ) {if (!fs->dax_dev) { err = -EINVAL ; pr_err("virtio-fs: dax can't be enabled as filesystem"
Signature · 1 line
2.27.0
PATCH v4 3/8 fuse: support per-file DAX
In reply to Jeffle XuExpand the fuse protocol to support per-file DAX.
FUSE_PERFILE_DAX flag is added indicating if fuse server/client supporting per-file DAX when sending or replying FUSE_INIT request.
Besides, FUSE_ATTR_DAX flag is added indicating if DAX shall be enabled for corresponding file when replying FUSE_LOOKUP request.
--- include/uapi/linux/fuse.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
include/uapi/linux/fuse.h +8 -1
@@ -184,6 +184,9 @@* * 7.34 * - add FUSE_SYNCFS +* +* 7.35 +* - add FUSE_PERFILE_DAX, FUSE_ATTR_DAX */ #ifndef _LINUX_FUSE_H
@@ -219,7 +222,7 @@#define FUSE_KERNEL_VERSION 7/** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 34 +#define FUSE_KERNEL_MINOR_VERSION 35/** The node ID of the root inode */ #define FUSE_ROOT_ID 1
@@ -336,6 +339,7 @@ struct fuse_file_lock {* write/truncate sgid is killed only if file has group * execute permission. (Same as Linux VFS behavior). * FUSE_SETXATTR_EXT: Server supports extended struct fuse_setxattr_in +* FUSE_PERFILE_DAX: kernel supports per-file DAX */ #define FUSE_ASYNC_READ (1 << 0)#define FUSE_POSIX_LOCKS (1 << 1)
@@ -367,6 +371,7 @@ struct fuse_file_lock {#define FUSE_SUBMOUNTS (1 << 27)#define FUSE_HANDLE_KILLPRIV_V2 (1 << 28)#define FUSE_SETXATTR_EXT (1 << 29) +#define FUSE_PERFILE_DAX (1 << 30)/** * CUSE INIT request/reply flags
@@ -449,8 +454,10 @@ struct fuse_file_lock {* fuse_attr flags * * FUSE_ATTR_SUBMOUNT: Object is a submount root +* FUSE_ATTR_DAX: Enable DAX for this file in per-file DAX mode */ #define FUSE_ATTR_SUBMOUNT (1 << 0) +#define FUSE_ATTR_DAX (1 << 1)/** * Open flags
Signature · 1 line
2.27.0
PATCH v4 4/8 fuse: negotiate if server/client supports per-file DAX
In reply to Jeffle XuAmong the FUSE_INIT phase, server/client shall negotiate if supporting per-file DAX.
Requirements for server:
- capable of handling SETFLAGS/FSSETXATTR ioctl and storing FS_DAX_FL/FS_XFLAG_DAX persistently.
- set FUSE_ATTR_DAX if the file capable of per-file DAX when replying FUSE_LOOKUP request accordingly.
Requirements for client:
- capable of handling per-file DAX when receiving FUSE_ATTR_DAX.
--- fs/fuse/fuse_i.h | 3 +++ fs/fuse/inode.c | 12 ++++++++---- 2 files changed, 11 insertions(+), 4 deletions(-)
fs/fuse/fuse_i.h +3 -0
@@ -770,6 +770,9 @@ struct fuse_conn {/* Propagate syncfs() to server */ unsigned int sync_fs:1; +/* Does the filesystem support per-file DAX? */ + unsigned int perfile_dax:1; +/** The number of requests waiting for completion */ atomic_t num_waiting;
fs/fuse/inode.c +8 -4
@@ -1087,10 +1087,12 @@ static void process_init_reply(struct fuse_mount *fm, struct fuse_args *args, min_t(unsigned int, fc->max_pages_limit, max_t(unsigned int, arg->max_pages, 1)); } -if (IS_ENABLED (CONFIG_FUSE_DAX ) && - arg->flags &FUSE_MAP_ALIGNMENT && - !fuse_dax_check_alignment (fc, arg->map_alignment)) { - ok = false; +if (IS_ENABLED (CONFIG_FUSE_DAX )) { +if (arg->flags &FUSE_MAP_ALIGNMENT && + !fuse_dax_check_alignment (fc, arg->map_alignment)) + ok = false; +if (arg->flags &FUSE_PERFILE_DAX ) + fc->perfile_dax =1 ; }if (arg->flags &FUSE_HANDLE_KILLPRIV_V2 ) { fc->handle_killpriv_v2 =1 ;
@@ -1145,6 +1147,8 @@ void fuse_send_init(struct fuse_mount *fm)#ifdef CONFIG_FUSE_DAX if (fm->fc->dax) ia->in.flags |=FUSE_MAP_ALIGNMENT ; +if (fm->fc->dax_mode ==FUSE_DAX_INODE ) + ia->in.flags |=FUSE_PERFILE_DAX ;#endif if (fm->fc->auto_submounts) ia->in.flags |=FUSE_SUBMOUNTS ;
Signature · 1 line
2.27.0
PATCH v4 5/8 fuse: enable per-file DAX
In reply to Jeffle XuEnable per-file DAX if fuse server advertises that the file supports that.
Currently the state whether the file enables DAX or not is initialized only when inode is instantiated.
--- fs/fuse/dax.c | 12 ++++++++---- fs/fuse/file.c | 4 ++-- fs/fuse/fuse_i.h | 4 ++-- fs/fuse/inode.c | 2 +- 4 files changed, 13 insertions(+), 9 deletions(-)
fs/fuse/dax.c +8 -4
@@ -1339,7 +1339,7 @@ static const struct address_space_operations fuse_dax_file_aops = { .invalidatepage = noop_invalidatepage, }; -static bool fuse_should_enable_dax (struct inode *inode) +static bool fuse_should_enable_dax (struct inode *inode,unsigned int flags) {struct fuse_conn *fc =get_fuse_conn (inode);unsigned int dax_mode = fc->dax_mode;
@@ -1348,12 +1348,16 @@ static bool fuse_should_enable_dax(struct inode *inode)if (dax_mode ==FUSE_DAX_NEVER )return false; -return true; +if (dax_mode ==FUSE_DAX_ALWAYS ) +return true; + +WARN_ON_ONCE (dax_mode !=FUSE_DAX_INODE ); +return fc->perfile_dax && (flags &FUSE_ATTR_DAX ); } -void fuse_dax_inode_init (struct inode *inode) +void fuse_dax_inode_init (struct inode *inode,unsigned int flags) { -if (!fuse_should_enable_dax (inode)) +if (!fuse_should_enable_dax (inode, flags))return ; inode->i_flags |=S_DAX ;
fs/fuse/file.c +2 -2
@@ -3148,7 +3148,7 @@ static const struct address_space_operations fuse_file_aops = { .write_end = fuse_write_end, }; -void fuse_init_file_inode (struct inode *inode) +void fuse_init_file_inode (struct inode *inode,unsigned int flags) {struct fuse_inode *fi =get_fuse_inode (inode);
@@ -3162,5 +3162,5 @@ void fuse_init_file_inode(struct inode *inode) fi->writepages =RB_ROOT ;if (IS_ENABLED (CONFIG_FUSE_DAX )) -fuse_dax_inode_init (inode); +fuse_dax_inode_init (inode, flags); }
fs/fuse/fuse_i.h +2 -2
@@ -1006,7 +1006,7 @@ int fuse_notify_poll_wakeup(struct fuse_conn *fc,/** * Initialize file operations on a regular file */ -void fuse_init_file_inode (struct inode *inode); +void fuse_init_file_inode (struct inode *inode,unsigned int flags);/** * Initialize inode operations on regular files and special files
@@ -1258,7 +1258,7 @@ int fuse_dax_conn_alloc(struct fuse_conn *fc, enum fuse_dax_mode mode, struct dax_device *dax_dev);void fuse_dax_conn_free (struct fuse_conn *fc);bool fuse_dax_inode_alloc (struct super_block *sb,struct fuse_inode *fi); -void fuse_dax_inode_init (struct inode *inode); +void fuse_dax_inode_init (struct inode *inode,unsigned int flags);void fuse_dax_inode_cleanup (struct inode *inode);bool fuse_dax_check_alignment (struct fuse_conn *fc,unsigned int map_alignment);void fuse_dax_cancel_work (struct fuse_conn *fc);
fs/fuse/inode.c +1 -1
@@ -281,7 +281,7 @@ static void fuse_init_inode(struct inode *inode, struct fuse_attr *attr) inode->i_ctime.tv_nsec = attr->ctimensec;if (S_ISREG (inode->i_mode)) {fuse_init_common (inode); -fuse_init_file_inode (inode); +fuse_init_file_inode (inode, attr->flags); }else if (S_ISDIR (inode->i_mode))fuse_init_dir (inode);else if (S_ISLNK (inode->i_mode))
Signature · 1 line
2.27.0
PATCH v4 6/8 fuse: mark inode DONT_CACHE when per-file DAX indication changes
In reply to Jeffle XuWhen the per-file DAX indication changes while the file is still *opened*, it is quite complicated and maybe fragile to dynamically change the DAX state.
Hence mark the inode and corresponding dentries as DONE_CACHE once the per-file DAX indication changes, so that the inode instance will be evicted and freed as soon as possible once the file is closed and the last reference to the inode is put. And then when the file gets reopened next time, the inode will reflect the new DAX state.
In summary, when the per-file DAX indication changes for an *opened* file, the state of the file won't be updated until this file is closed and reopened later.
--- fs/fuse/dax.c | 9 +++++++++ fs/fuse/fuse_i.h | 1 + fs/fuse/inode.c | 3 +++ 3 files changed, 13 insertions(+)
fs/fuse/dax.c +9 -0
@@ -1364,6 +1364,15 @@ void fuse_dax_inode_init(struct inode *inode, unsigned int flags) inode->i_data.a_ops = &fuse_dax_file_aops; } +void fuse_dax_dontcache (struct inode *inode,bool newdax) +{ +struct fuse_conn *fc =get_fuse_conn (inode); + +if (fc->dax_mode ==FUSE_DAX_INODE && + fc->perfile_dax && (!!IS_DAX (inode) != newdax)) +d_mark_dontcache (inode); +} +bool fuse_dax_check_alignment (struct fuse_conn *fc,unsigned int map_alignment) {if (fc->dax && (map_alignment >FUSE_DAX_SHIFT )) {
fs/fuse/fuse_i.h +1 -0
@@ -1260,6 +1260,7 @@ void fuse_dax_conn_free(struct fuse_conn *fc);bool fuse_dax_inode_alloc (struct super_block *sb,struct fuse_inode *fi);void fuse_dax_inode_init (struct inode *inode,unsigned int flags);void fuse_dax_inode_cleanup (struct inode *inode); +void fuse_dax_dontcache (struct inode *inode,bool newdax);bool fuse_dax_check_alignment (struct fuse_conn *fc,unsigned int map_alignment);void fuse_dax_cancel_work (struct fuse_conn *fc);
fs/fuse/inode.c +3 -0
@@ -269,6 +269,9 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,if (inval)invalidate_inode_pages2 (inode->i_mapping); } + +if (IS_ENABLED (CONFIG_FUSE_DAX )) +fuse_dax_dontcache (inode, attr->flags &FUSE_ATTR_DAX ); }static void fuse_init_inode (struct inode *inode,struct fuse_attr *attr)
Signature · 1 line
2.27.0
Re: [Virtio-fs] [PATCH v4 6/8] fuse: mark inode DONT_CACHE when per-file DAX indication changes
Quoted 5 lines · * Jeffle Xu ([email protected]) wrote:
When the per-file DAX indication changes while the file is still *opened*, it is quite complicated and maybe fragile to dynamically change the DAX state.
Hence mark the inode and corresponding dentries as
DONE_CACHEonce the
^^^^^^^^^^
typo as DONT ?
Dave
Quoted 70 lines
per-file DAX indication changes, so that the inode instance will be evicted and freed as soon as possible once the file is closed and the last reference to the inode is put. And then when the file gets reopened next time, the inode will reflect the new DAX state.
In summary, when the per-file DAX indication changes for an *opened* file, the state of the file won't be updated until this file is closed and reopened later.
Signed-off-by Jeffle Xu <[email protected]>--- fs/fuse/dax.c | 9 +++++++++ fs/fuse/fuse_i.h | 1 + fs/fuse/inode.c | 3 +++ 3 files changed, 13 insertions(+)fs/fuse/dax.c +9
-0@@ -1364,6 +1364,15 @@ void fuse_dax_inode_init(struct inode *inode, unsigned int flags) inode->i_data.a_ops = &fuse_dax_file_aops; } +void fuse_dax_dontcache (struct inode *inode,bool newdax) +{ +struct fuse_conn *fc =get_fuse_conn (inode); + +if (fc->dax_mode ==FUSE_DAX_INODE && + fc->perfile_dax && (!!IS_DAX (inode) != newdax)) +d_mark_dontcache (inode); +} +bool fuse_dax_check_alignment (struct fuse_conn *fc,unsigned int map_alignment) {if (fc->dax && (map_alignment >FUSE_DAX_SHIFT )) {fs/fuse/fuse_i.h +1
-0@@ -1260,6 +1260,7 @@ void fuse_dax_conn_free(struct fuse_conn *fc);bool fuse_dax_inode_alloc (struct super_block *sb,struct fuse_inode *fi);void fuse_dax_inode_init (struct inode *inode,unsigned int flags);void fuse_dax_inode_cleanup (struct inode *inode); +void fuse_dax_dontcache (struct inode *inode,bool newdax);bool fuse_dax_check_alignment (struct fuse_conn *fc,unsigned int map_alignment);void fuse_dax_cancel_work (struct fuse_conn *fc);fs/fuse/inode.c +3
-0@@ -269,6 +269,9 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,if (inval)invalidate_inode_pages2 (inode->i_mapping); } + +if (IS_ENABLED (CONFIG_FUSE_DAX )) +fuse_dax_dontcache (inode, attr->flags &FUSE_ATTR_DAX ); }static void fuse_init_inode (struct inode *inode,struct fuse_attr *attr)Signature · 6 lines
2.27.0 _______________________________________________ Virtio-fs mailing list [email protected] https://listman.redhat.com/mailman/listinfo/virtio-fs
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [Virtio-fs] [PATCH v4 6/8] fuse: mark inode DONT_CACHE when per-file DAX indication changes
Quoted 10 lines · Dr. David Alan Gilbert
Quoted 5 lines · * Jeffle Xu ([email protected]) wrote:
When the per-file DAX indication changes while the file is still *opened*, it is quite complicated and maybe fragile to dynamically change the DAX state.
Hence mark the inode and corresponding dentries as
DONE_CACHEonce the^^^^^^^^^^typo as DONT ?
Thanks. I will fix it.
Quoted 71 lines
Quoted 71 lines
per-file DAX indication changes, so that the inode instance will be evicted and freed as soon as possible once the file is closed and the last reference to the inode is put. And then when the file gets reopened next time, the inode will reflect the new DAX state.
In summary, when the per-file DAX indication changes for an *opened* file, the state of the file won't be updated until this file is closed and reopened later.
Signed-off-by Jeffle Xu <[email protected]>--- fs/fuse/dax.c | 9 +++++++++ fs/fuse/fuse_i.h | 1 + fs/fuse/inode.c | 3 +++ 3 files changed, 13 insertions(+)fs/fuse/dax.c +9
-0@@ -1364,6 +1364,15 @@ void fuse_dax_inode_init(struct inode *inode, unsigned int flags) inode->i_data.a_ops = &fuse_dax_file_aops; } +void fuse_dax_dontcache (struct inode *inode,bool newdax) +{ +struct fuse_conn *fc =get_fuse_conn (inode); + +if (fc->dax_mode ==FUSE_DAX_INODE && + fc->perfile_dax && (!!IS_DAX (inode) != newdax)) +d_mark_dontcache (inode); +} +bool fuse_dax_check_alignment (struct fuse_conn *fc,unsigned int map_alignment) {if (fc->dax && (map_alignment >FUSE_DAX_SHIFT )) {fs/fuse/fuse_i.h +1
-0@@ -1260,6 +1260,7 @@ void fuse_dax_conn_free(struct fuse_conn *fc);bool fuse_dax_inode_alloc (struct super_block *sb,struct fuse_inode *fi);void fuse_dax_inode_init (struct inode *inode,unsigned int flags);void fuse_dax_inode_cleanup (struct inode *inode); +void fuse_dax_dontcache (struct inode *inode,bool newdax);bool fuse_dax_check_alignment (struct fuse_conn *fc,unsigned int map_alignment);void fuse_dax_cancel_work (struct fuse_conn *fc);fs/fuse/inode.c +3
-0@@ -269,6 +269,9 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,if (inval)invalidate_inode_pages2 (inode->i_mapping); } + +if (IS_ENABLED (CONFIG_FUSE_DAX )) +fuse_dax_dontcache (inode, attr->flags &FUSE_ATTR_DAX ); }static void fuse_init_inode (struct inode *inode,struct fuse_attr *attr)Signature · 6 lines
2.27.0 _______________________________________________ Virtio-fs mailing list [email protected] https://listman.redhat.com/mailman/listinfo/virtio-fs
Signature · 2 lines
Thanks, Jeffle
PATCH v4 7/8 fuse: support changing per-file DAX flag inside guest
In reply to Jeffle XuFuse client can enable or disable per-file DAX inside kernel/guest by chattr(1). Similarly the new state won't be updated until the file is closed and reopened later.
--- fs/fuse/ioctl.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
fs/fuse/ioctl.c +13 -2
@@ -469,8 +469,6 @@ int fuse_fileattr_set(struct user_namespace *mnt_userns,if (fa->flags_valid) { err =fuse_priv_ioctl (inode, ff,FS_IOC_SETFLAGS , &flags,sizeof (flags)); -if (err) - goto cleanup; }else {memset (&xfa,0 ,sizeof (xfa)); xfa.fsx_xflags = fa->fsx_xflags;
@@ -483,6 +481,19 @@ int fuse_fileattr_set(struct user_namespace *mnt_userns, &xfa, sizeof(xfa)); } +if (err) + goto cleanup; + +if (IS_ENABLED (CONFIG_FUSE_DAX )) { +bool newdax; + +if (fa->flags_valid) + newdax = flags &FS_DAX_FL ; +else + newdax = fa->fsx_xflags &FS_XFLAG_DAX ; +fuse_dax_dontcache (inode, newdax); + } + cleanup:fuse_priv_ioctl_cleanup (inode, ff);
Signature · 1 line
2.27.0
PATCH v4 8/8 fuse: show '-o dax=inode' option only when FUSE server supports
In reply to Jeffle XuPrior of this patch, the mount option will still show '-o dax=inode' when FUSE server advertises that it doesn't support per-file DAX.
--- fs/fuse/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/fuse/inode.c +1 -1
@@ -697,7 +697,7 @@ static int fuse_show_options(struct seq_file *m, struct dentry *root)seq_puts (m,",dax=always" ); else if (fc->dax_mode == FUSE_DAX_NEVER) seq_puts(m, ",dax=never"); - else if (fc->dax_mode == FUSE_DAX_INODE) + else if ((fc->dax_mode == FUSE_DAX_INODE) && fc->perfile_dax)seq_puts (m,",dax=inode" );#endif
Signature · 1 line
2.27.0
v4 cover virtiofsd: support per-file DAX
In reply to Jeffle XuI mentioned in virtiofsd PATCH v1 that virtiofsd exits once ioctl() is called. After depper investigation into this issue, I find that it is because ioctl() is blocked out the whitelist of seccomp of virtiofsd.
To support ioctl, ioctl syscall shall be added into the whitelist (see patch
1).
And this is the complete workable version for virtiofsd:
- virtiofsd now supports FUSE_IOCTL now, though currently only FS_IOC_G[S]ETFLAGS/FS_IOC_FSG[S]ETXATTR are supported.
- During FUSE_INIT, virtiofsd advertise support for per-file DAX only when the backend fs is ext4/xfs.
- FS_IOC_SETFLAGS/FS_IOC_FSSETXATTR FUSE_IOCTL will be directed to host, so that FS_DAX_FL could be flushed to backed fs persistently.
- During FUSE_LOOKUP, virtiofsd will decide DAX shall be enabled for current file according to if this file is marked with FS_DAX_FL in the backend fs.
changes since v2/v3:
Patch 4 in v2 is incomplete by mistake and it will fail to be compiled. I had ever sent a seperate patch 4 of v3. Now I send the whole complete set in v4. Except for this, there's no other diferrence.
Jeffle Xu (4):
virtiofsd: add .ioctl() support
virtiofsd: expand fuse protocol to support per-file DAX
virtiofsd: support per-file DAX negotiation in FUSE_INIT
virtiofsd: support per-file DAX in FUSE_LOOKUP
include/standard-headers/linux/fuse.h | 2 + tools/virtiofsd/fuse_common.h | 5 ++ tools/virtiofsd/fuse_lowlevel.c | 6 ++ tools/virtiofsd/passthrough_ll.c | 125 ++++++++++++++++++++++++++ tools/virtiofsd/passthrough_seccomp.c | 1 + 5 files changed, 139 insertions(+)
Signature · 1 line
2.27.0
PATCH v4 1/4 virtiofsd: add .ioctl() support
Add .ioctl() support for passthrough, in prep for the following support for following per-file DAX feature.
Once advertising support for per-file DAX feature, virtiofsd should support storing FS_DAX_FL flag persistently passed by FS_IOC_SETFLAGS/FS_IOC_FSSETXATTR ioctl, and set FUSE_ATTR_DAX in FUSE_LOOKUP accordingly if the file is capable of per-file DAX.
When it comes to passthrough, it passes corresponding ioctls to host directly. Currently only these ioctls that are needed for per-file DAX feature, i.e., FS_IOC_GETFLAGS/FS_IOC_SETFLAGS and FS_IOC_FSGETXATTR/FS_IOC_FSSETXATTR are supported. Later we can restrict the flags/attributes allowed to be set to reinforce the security, or extend the scope of allowed ioctls if it is really needed later.
--- tools/virtiofsd/passthrough_ll.c | 53 +++++++++++++++++++++++++++ tools/virtiofsd/passthrough_seccomp.c | 1 + 2 files changed, 54 insertions(+)
tools/virtiofsd/passthrough_ll.c +53 -0
@@ -54,6 +54,7 @@#include <sys/wait.h> #include <sys/xattr.h> #include <syslog.h> +#include <linux/fs.h> #include "qemu/cutils.h" #include "passthrough_helpers.h"
@@ -2105,6 +2106,57 @@ out:fuse_reply_err (req, saverr); } +static void lo_ioctl (fuse_req_t req,fuse_ino_t ino,unsigned int cmd,void *arg, +struct fuse_file_info *fi,unsigned flags,const void *in_buf, +size_t in_bufsz,size_t out_bufsz) +{ +int fd =lo_fi_fd (req, fi); +int res; +int saverr =ENOSYS ; + +fuse_log (FUSE_LOG_DEBUG ,"lo_ioctl(ino=%" PRIu64", cmd=0x%x, flags=0x%x, " +"in_bufsz = %lu, out_bufsz = %lu)\n" , + ino, cmd, flags, in_bufsz, out_bufsz); + +/* unrestricted ioctl is not supported yet */ +if (flags &FUSE_IOCTL_UNRESTRICTED ) + goto out; + +/* +* Currently only those ioctls needed to support per-file DAX feature, +* i.e., FS_IOC_GETFLAGS/FS_IOC_SETFLAGS and +* FS_IOC_FSGETXATTR/FS_IOC_FSSETXATTR are supported. +*/ +if (cmd ==FS_IOC_SETFLAGS || cmd ==FS_IOC_FSSETXATTR ) { + res =ioctl (fd, cmd, in_buf); +if (res <0 ) + goto out_err; + +fuse_reply_ioctl (req,0 ,NULL ,0 ); + } +else if (cmd ==FS_IOC_GETFLAGS || cmd ==FS_IOC_FSGETXATTR ) { +/* reused for 'unsigned int' for FS_IOC_GETFLAGS */ +struct fsxattr attr; + + res =ioctl (fd, cmd, &attr); +if (res <0 ) + goto out_err; + +fuse_reply_ioctl (req,0 , &attr, out_bufsz); + } +else { +fuse_log (FUSE_LOG_DEBUG ,"Unsupported ioctl 0x%x\n" , cmd); + goto out; + } + +return ; + +out_err: + saverr = errno; +out: +fuse_reply_err (req, saverr); +} +static void lo_fsyncdir (fuse_req_t req,fuse_ino_t ino,int datasync,struct fuse_file_info *fi) {
@@ -3279,6 +3331,7 @@ static struct fuse_lowlevel_ops lo_oper = { .create = lo_create, .getlk = lo_getlk, .setlk = lo_setlk, + .ioctl = lo_ioctl, .open = lo_open, .release = lo_release, .flush = lo_flush,
tools/virtiofsd/passthrough_seccomp.c +1 -0
@@ -62,6 +62,7 @@ static const int syscall_allowlist[] = {SCMP_SYS (gettid),SCMP_SYS (gettimeofday),SCMP_SYS (getxattr), +SCMP_SYS (ioctl),SCMP_SYS (linkat),SCMP_SYS (listxattr), SCMP_SYS(lseek),
Signature · 1 line
2.27.0
Vivek Goyal
maintainerRe: [virtiofsd PATCH v4 1/4] virtiofsd: add .ioctl() support
Quoted 8 lines · Jeffle Xu
Add .ioctl() support for passthrough, in prep for the following support for following per-file DAX feature.
Once advertising support for per-file DAX feature, virtiofsd should support storing
FS_DAX_FLflag persistently passed by FS_IOC_SETFLAGS/FS_IOC_FSSETXATTR ioctl, and setFUSE_ATTR_DAXinFUSE_LOOKUPaccordingly if the file is capable of per-file DAX.
Quoted 6 lines
When it comes to passthrough, it passes corresponding ioctls to host directly. Currently only these ioctls that are needed for per-file DAX feature, i.e., FS_IOC_GETFLAGS/FS_IOC_SETFLAGS and FS_IOC_FSGETXATTR/FS_IOC_FSSETXATTR are supported. Later we can restrict the flags/attributes allowed to be set to reinforce the security, or extend the scope of allowed ioctls if it is really needed later.
Dave had concerns about which attrs should be allowed to be set by guest. And we were also wondering why virtiofs is not supporting ioctl yet.
It think that it probably will make sense that supporting ioctls, is a separate patch series for virtiofs. Anyway, we probably will need to add it.
Vivek
Quoted 100 lines
Signed-off-by Jeffle Xu <[email protected]>--- tools/virtiofsd/passthrough_ll.c | 53 +++++++++++++++++++++++++++ tools/virtiofsd/passthrough_seccomp.c | 1 + 2 files changed, 54 insertions(+)tools/virtiofsd/passthrough_ll.c +53
-0@@ -54,6 +54,7 @@#include <sys/wait.h> #include <sys/xattr.h> #include <syslog.h> +#include <linux/fs.h> #include "qemu/cutils.h" #include "passthrough_helpers.h" @@ -2105,6 +2106,57 @@ out:fuse_reply_err (req, saverr); } +static void lo_ioctl (fuse_req_t req,fuse_ino_t ino,unsigned int cmd,void *arg, +struct fuse_file_info *fi,unsigned flags,const void *in_buf, +size_t in_bufsz,size_t out_bufsz) +{ +int fd =lo_fi_fd (req, fi); +int res; +int saverr =ENOSYS ; + +fuse_log (FUSE_LOG_DEBUG ,"lo_ioctl(ino=%" PRIu64", cmd=0x%x, flags=0x%x, " +"in_bufsz = %lu, out_bufsz = %lu)\n" , + ino, cmd, flags, in_bufsz, out_bufsz); + +/* unrestricted ioctl is not supported yet */ +if (flags &FUSE_IOCTL_UNRESTRICTED ) + goto out; + +/* +* Currently only those ioctls needed to support per-file DAX feature, +* i.e., FS_IOC_GETFLAGS/FS_IOC_SETFLAGS and +* FS_IOC_FSGETXATTR/FS_IOC_FSSETXATTR are supported. +*/ +if (cmd ==FS_IOC_SETFLAGS || cmd ==FS_IOC_FSSETXATTR ) { + res =ioctl (fd, cmd, in_buf); +if (res <0 ) + goto out_err; + +fuse_reply_ioctl (req,0 ,NULL ,0 ); + } +else if (cmd ==FS_IOC_GETFLAGS || cmd ==FS_IOC_FSGETXATTR ) { +/* reused for 'unsigned int' for FS_IOC_GETFLAGS */ +struct fsxattr attr; + + res =ioctl (fd, cmd, &attr); +if (res <0 ) + goto out_err; + +fuse_reply_ioctl (req,0 , &attr, out_bufsz); + } +else { +fuse_log (FUSE_LOG_DEBUG ,"Unsupported ioctl 0x%x\n" , cmd); + goto out; + } + +return ; + +out_err: + saverr = errno; +out: +fuse_reply_err (req, saverr); +} +static void lo_fsyncdir (fuse_req_t req,fuse_ino_t ino,int datasync,struct fuse_file_info *fi) {@@ -3279,6 +3331,7 @@ static struct fuse_lowlevel_ops lo_oper = { .create = lo_create, .getlk = lo_getlk, .setlk = lo_setlk, + .ioctl = lo_ioctl, .open = lo_open, .release = lo_release, .flush = lo_flush,tools/virtiofsd/passthrough_seccomp.c +1
-0@@ -62,6 +62,7 @@ static const int syscall_allowlist[] = {SCMP_SYS (gettid),SCMP_SYS (gettimeofday),SCMP_SYS (getxattr), +SCMP_SYS (ioctl),SCMP_SYS (linkat),SCMP_SYS (listxattr), SCMP_SYS(lseek),Signature · 1 line
2.27.0
PATCH v4 2/4 virtiofsd: expand fuse protocol to support per-file DAX
In reply to Jeffle Xu--- include/standard-headers/linux/fuse.h | 2 ++ 1 file changed, 2 insertions(+)
include/standard-headers/linux/fuse.h +2 -0
@@ -356,6 +356,7 @@ struct fuse_file_lock {#define FUSE_MAP_ALIGNMENT (1 << 26)#define FUSE_SUBMOUNTS (1 << 27)#define FUSE_HANDLE_KILLPRIV_V2 (1 << 28) +#define FUSE_PERFILE_DAX (1 << 30)/** * CUSE INIT request/reply flags
@@ -440,6 +441,7 @@ struct fuse_file_lock {* FUSE_ATTR_SUBMOUNT: Object is a submount root */ #define FUSE_ATTR_SUBMOUNT (1 << 0) +#define FUSE_ATTR_DAX (1 << 1)/** * Open flags
Signature · 1 line
2.27.0
PATCH v4 3/4 virtiofsd: support per-file DAX negotiation in FUSE_INIT
In reply to Jeffle XuIn FUSE_INIT negotiating phase, server/client should advertise if it supports per-file DAX.
Once advertising support for per-file DAX feature, virtiofsd should support storing FS_DAX_FL flag persistently passed by FS_IOC_SETFLAGS/FS_IOC_FSSETXATTR ioctl, and set FUSE_ATTR_DAX in FUSE_LOOKUP accordingly if the file is capable of per-file DAX.
Currently only ext4/xfs since linux kernel v5.8 support storing FS_DAX_FL flag persistently, and thus advertise support for per-file DAX feature only when the backend fs type is ext4 and xfs.
--- tools/virtiofsd/fuse_common.h | 5 +++++ tools/virtiofsd/fuse_lowlevel.c | 6 ++++++ tools/virtiofsd/passthrough_ll.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+)
tools/virtiofsd/fuse_common.h +5 -0
@@ -372,6 +372,11 @@ struct fuse_file_info {*/ #define FUSE_CAP_HANDLE_KILLPRIV_V2 (1 << 28) +/** +* Indicates support for per-file DAX. +*/ +#define FUSE_CAP_PERFILE_DAX (1 << 29) +/** * Ioctl flags *
tools/virtiofsd/fuse_lowlevel.c +6 -0
@@ -2065,6 +2065,9 @@ static void do_init(fuse_req_t req, fuse_ino_t nodeid,if (arg->flags &FUSE_HANDLE_KILLPRIV_V2 ) { se->conn.capable |=FUSE_CAP_HANDLE_KILLPRIV_V2 ; } +if (arg->flags &FUSE_PERFILE_DAX ) { + se->conn.capable |=FUSE_CAP_PERFILE_DAX ; + }#ifdef HAVE_SPLICE #ifdef HAVE_VMSPLICE se->conn.capable |=FUSE_CAP_SPLICE_WRITE |FUSE_CAP_SPLICE_MOVE ;
@@ -2180,6 +2183,9 @@ static void do_init(fuse_req_t req, fuse_ino_t nodeid,if (se->conn.want &FUSE_CAP_POSIX_ACL ) { outarg.flags |=FUSE_POSIX_ACL ; } +if (se->op.ioctl && (se->conn.want &FUSE_CAP_PERFILE_DAX )) { + outarg.flags |=FUSE_PERFILE_DAX ; + } outarg.max_readahead = se->conn.max_readahead; outarg.max_write = se->conn.max_write;if (se->conn.max_background >= (1 <<16 )) {
tools/virtiofsd/passthrough_ll.c +29 -0
@@ -53,8 +53,10 @@#include <sys/syscall.h> #include <sys/wait.h> #include <sys/xattr.h> +#include <sys/vfs.h> #include <syslog.h> #include <linux/fs.h> +#include <linux/magic.h> #include "qemu/cutils.h" #include "passthrough_helpers.h"
@@ -136,6 +138,13 @@ enum { SANDBOX_CHROOT, }; +/* capability of storing DAX flag persistently */ +enum { +DAX_CAP_NONE ,/* not supported */ +DAX_CAP_FLAGS ,/* stored in flags (FS_IOC_GETFLAGS/FS_IOC_SETFLAGS) */ +DAX_CAP_XATTR ,/* stored in xflags (FS_IOC_FSGETXATTR/FS_IOC_FSSETXATTR) */ +}; + typedef struct xattr_map_entry { char *key; char *prepend;
@@ -161,6 +170,7 @@ struct lo_data {int readdirplus_clear;int allow_direct_io;int announce_submounts; +int perfile_dax_cap;/* capability of backend fs */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */
@@ -703,6 +713,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn) conn->want &= ~FUSE_CAP_HANDLE_KILLPRIV_V2 ; lo->killpriv_v2 =0 ; } + +if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { + conn->want |=FUSE_CAP_PERFILE_DAX ; + } } static void lo_getattr(fuse_req_t req, fuse_ino_t ino,
@@ -3800,6 +3814,7 @@ static void setup_root(struct lo_data *lo, struct lo_inode *root)int fd, res;struct stat stat;uint64_t mnt_id; +struct statfs statfs; fd =open ("/" ,O_PATH );if (fd ==-1 ) {
@@ -3826,6 +3841,20 @@ static void setup_root(struct lo_data *lo, struct lo_inode *root) root->posix_locks =g_hash_table_new_full ( g_direct_hash, g_direct_equal,NULL , posix_locks_value_destroy); } + +/* +* Currently only ext4/xfs since linux kernel v5.8 support storing +* FS_DAX_FL flag persistently. Ext4 accesses this flag through +* FS_IOC_G[S]ETFLAGS ioctl, while xfs accesses this flag through +* FS_IOC_FSG[S]ETXATTR ioctl. +*/ + res =fstatfs (fd, &statfs); +if (!res) { +if (statfs.f_type ==EXT4_SUPER_MAGIC ) + lo->perfile_dax_cap =DAX_CAP_FLAGS ; +else if (statfs.f_type ==XFS_SUPER_MAGIC ) + lo->perfile_dax_cap =DAX_CAP_XATTR ; + } }static guint lo_key_hash (gconstpointer key)
Signature · 1 line
2.27.0
Re: [Virtio-fs] [virtiofsd PATCH v4 3/4] virtiofsd: support per-file DAX negotiation in FUSE_INIT
Quoted 11 lines · * Jeffle Xu ([email protected]) wrote:
In
FUSE_INITnegotiating phase, server/client should advertise if it supports per-file DAX.Once advertising support for per-file DAX feature, virtiofsd should support storing
FS_DAX_FLflag persistently passed by FS_IOC_SETFLAGS/FS_IOC_FSSETXATTR ioctl, and setFUSE_ATTR_DAXinFUSE_LOOKUPaccordingly if the file is capable of per-file DAX.Currently only ext4/xfs since linux kernel v5.8 support storing
FS_DAX_FLflag persistently, and thus advertise support for per-file DAX feature only when the backend fs type is ext4 and xfs.
I'm a little worried about the meaning of the flags we're storing and the fact we're storing them in the normal host DAX flags.
Doesn't this mean that we're using a single host flag to mean:
a) It can be mapped as DAX on the host if it was a real DAX device
b) We can map it as DAX inside the guest with virtiofs?
what happens when we're using usernamespaces for the guest?
Dave
Quoted 132 lines
Signed-off-by Jeffle Xu <[email protected]>--- tools/virtiofsd/fuse_common.h | 5 +++++ tools/virtiofsd/fuse_lowlevel.c | 6 ++++++ tools/virtiofsd/passthrough_ll.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+)tools/virtiofsd/fuse_common.h +5
-0@@ -372,6 +372,11 @@ struct fuse_file_info {*/ #define FUSE_CAP_HANDLE_KILLPRIV_V2 (1 << 28) +/** +* Indicates support for per-file DAX. +*/ +#define FUSE_CAP_PERFILE_DAX (1 << 29) +/** * Ioctl flags * tools/virtiofsd/fuse_lowlevel.c +6
-0@@ -2065,6 +2065,9 @@ static void do_init(fuse_req_t req, fuse_ino_t nodeid,if (arg->flags &FUSE_HANDLE_KILLPRIV_V2 ) { se->conn.capable |=FUSE_CAP_HANDLE_KILLPRIV_V2 ; } +if (arg->flags &FUSE_PERFILE_DAX ) { + se->conn.capable |=FUSE_CAP_PERFILE_DAX ; + }#ifdef HAVE_SPLICE #ifdef HAVE_VMSPLICE se->conn.capable |=FUSE_CAP_SPLICE_WRITE |FUSE_CAP_SPLICE_MOVE ;@@ -2180,6 +2183,9 @@ static void do_init(fuse_req_t req, fuse_ino_t nodeid,if (se->conn.want &FUSE_CAP_POSIX_ACL ) { outarg.flags |=FUSE_POSIX_ACL ; } +if (se->op.ioctl && (se->conn.want &FUSE_CAP_PERFILE_DAX )) { + outarg.flags |=FUSE_PERFILE_DAX ; + } outarg.max_readahead = se->conn.max_readahead; outarg.max_write = se->conn.max_write;if (se->conn.max_background >= (1 <<16 )) {tools/virtiofsd/passthrough_ll.c +29
-0@@ -53,8 +53,10 @@#include <sys/syscall.h> #include <sys/wait.h> #include <sys/xattr.h> +#include <sys/vfs.h> #include <syslog.h> #include <linux/fs.h> +#include <linux/magic.h> #include "qemu/cutils.h" #include "passthrough_helpers.h" @@ -136,6 +138,13 @@ enum { SANDBOX_CHROOT, }; +/* capability of storing DAX flag persistently */ +enum { +DAX_CAP_NONE ,/* not supported */ +DAX_CAP_FLAGS ,/* stored in flags (FS_IOC_GETFLAGS/FS_IOC_SETFLAGS) */ +DAX_CAP_XATTR ,/* stored in xflags (FS_IOC_FSGETXATTR/FS_IOC_FSSETXATTR) */ +}; + typedef struct xattr_map_entry { char *key; char *prepend;@@ -161,6 +170,7 @@ struct lo_data {int readdirplus_clear;int allow_direct_io;int announce_submounts; +int perfile_dax_cap;/* capability of backend fs */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */ @@ -703,6 +713,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn) conn->want &= ~FUSE_CAP_HANDLE_KILLPRIV_V2 ; lo->killpriv_v2 =0 ; } + +if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { + conn->want |=FUSE_CAP_PERFILE_DAX ; + } } static void lo_getattr(fuse_req_t req, fuse_ino_t ino,@@ -3800,6 +3814,7 @@ static void setup_root(struct lo_data *lo, struct lo_inode *root)int fd, res;struct stat stat;uint64_t mnt_id; +struct statfs statfs; fd =open ("/" ,O_PATH );if (fd ==-1 ) {@@ -3826,6 +3841,20 @@ static void setup_root(struct lo_data *lo, struct lo_inode *root) root->posix_locks =g_hash_table_new_full ( g_direct_hash, g_direct_equal,NULL , posix_locks_value_destroy); } + +/* +* Currently only ext4/xfs since linux kernel v5.8 support storing +* FS_DAX_FL flag persistently. Ext4 accesses this flag through +* FS_IOC_G[S]ETFLAGS ioctl, while xfs accesses this flag through +* FS_IOC_FSG[S]ETXATTR ioctl. +*/ + res =fstatfs (fd, &statfs); +if (!res) { +if (statfs.f_type ==EXT4_SUPER_MAGIC ) + lo->perfile_dax_cap =DAX_CAP_FLAGS ; +else if (statfs.f_type ==XFS_SUPER_MAGIC ) + lo->perfile_dax_cap =DAX_CAP_XATTR ; + } }static guint lo_key_hash (gconstpointer key)Signature · 6 lines
2.27.0 _______________________________________________ Virtio-fs mailing list [email protected] https://listman.redhat.com/mailman/listinfo/virtio-fs
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [Virtio-fs] [virtiofsd PATCH v4 3/4] virtiofsd: support per-file DAX negotiation in FUSE_INIT
Quoted 13 lines · Dr. David Alan Gilbert
Quoted 11 lines · * Jeffle Xu ([email protected]) wrote:
In
FUSE_INITnegotiating phase, server/client should advertise if it supports per-file DAX.Once advertising support for per-file DAX feature, virtiofsd should support storing
FS_DAX_FLflag persistently passed by FS_IOC_SETFLAGS/FS_IOC_FSSETXATTR ioctl, and setFUSE_ATTR_DAXinFUSE_LOOKUPaccordingly if the file is capable of per-file DAX.Currently only ext4/xfs since linux kernel v5.8 support storing
FS_DAX_FLflag persistently, and thus advertise support for per-file DAX feature only when the backend fs type is ext4 and xfs.
Quoted 6 lines
I'm a little worried about the meaning of the flags we're storing and the fact we're storing them in the normal host DAX flags.
Doesn't this mean that we're using a single host flag to mean:
a) It can be mapped as DAX on the host if it was a real DAX device
b) We can map it as DAX inside the guest with virtiofs?
Yes the side effect is that the host file is also dax enabled if the backend fs is built upon real nvdimm device.
The rationale here is that, fuse daemon shall be capable of *marking* the file as dax capable *persistently*, so that it can be informed that this file is capable of dax later.
I'm not sure if xattr (extent attribute) is a better option for this?
Quoted 138 lines
what happens when we're using usernamespaces for the guest?
Dave
Quoted 132 lines
Signed-off-by Jeffle Xu <[email protected]>--- tools/virtiofsd/fuse_common.h | 5 +++++ tools/virtiofsd/fuse_lowlevel.c | 6 ++++++ tools/virtiofsd/passthrough_ll.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+)tools/virtiofsd/fuse_common.h +5
-0@@ -372,6 +372,11 @@ struct fuse_file_info {*/ #define FUSE_CAP_HANDLE_KILLPRIV_V2 (1 << 28) +/** +* Indicates support for per-file DAX. +*/ +#define FUSE_CAP_PERFILE_DAX (1 << 29) +/** * Ioctl flags * tools/virtiofsd/fuse_lowlevel.c +6
-0@@ -2065,6 +2065,9 @@ static void do_init(fuse_req_t req, fuse_ino_t nodeid,if (arg->flags &FUSE_HANDLE_KILLPRIV_V2 ) { se->conn.capable |=FUSE_CAP_HANDLE_KILLPRIV_V2 ; } +if (arg->flags &FUSE_PERFILE_DAX ) { + se->conn.capable |=FUSE_CAP_PERFILE_DAX ; + }#ifdef HAVE_SPLICE #ifdef HAVE_VMSPLICE se->conn.capable |=FUSE_CAP_SPLICE_WRITE |FUSE_CAP_SPLICE_MOVE ;@@ -2180,6 +2183,9 @@ static void do_init(fuse_req_t req, fuse_ino_t nodeid,if (se->conn.want &FUSE_CAP_POSIX_ACL ) { outarg.flags |=FUSE_POSIX_ACL ; } +if (se->op.ioctl && (se->conn.want &FUSE_CAP_PERFILE_DAX )) { + outarg.flags |=FUSE_PERFILE_DAX ; + } outarg.max_readahead = se->conn.max_readahead; outarg.max_write = se->conn.max_write;if (se->conn.max_background >= (1 <<16 )) {tools/virtiofsd/passthrough_ll.c +29
-0@@ -53,8 +53,10 @@#include <sys/syscall.h> #include <sys/wait.h> #include <sys/xattr.h> +#include <sys/vfs.h> #include <syslog.h> #include <linux/fs.h> +#include <linux/magic.h> #include "qemu/cutils.h" #include "passthrough_helpers.h" @@ -136,6 +138,13 @@ enum { SANDBOX_CHROOT, }; +/* capability of storing DAX flag persistently */ +enum { +DAX_CAP_NONE ,/* not supported */ +DAX_CAP_FLAGS ,/* stored in flags (FS_IOC_GETFLAGS/FS_IOC_SETFLAGS) */ +DAX_CAP_XATTR ,/* stored in xflags (FS_IOC_FSGETXATTR/FS_IOC_FSSETXATTR) */ +}; + typedef struct xattr_map_entry { char *key; char *prepend;@@ -161,6 +170,7 @@ struct lo_data {int readdirplus_clear;int allow_direct_io;int announce_submounts; +int perfile_dax_cap;/* capability of backend fs */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */ @@ -703,6 +713,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn) conn->want &= ~FUSE_CAP_HANDLE_KILLPRIV_V2 ; lo->killpriv_v2 =0 ; } + +if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { + conn->want |=FUSE_CAP_PERFILE_DAX ; + } } static void lo_getattr(fuse_req_t req, fuse_ino_t ino,@@ -3800,6 +3814,7 @@ static void setup_root(struct lo_data *lo, struct lo_inode *root)int fd, res;struct stat stat;uint64_t mnt_id; +struct statfs statfs; fd =open ("/" ,O_PATH );if (fd ==-1 ) {@@ -3826,6 +3841,20 @@ static void setup_root(struct lo_data *lo, struct lo_inode *root) root->posix_locks =g_hash_table_new_full ( g_direct_hash, g_direct_equal,NULL , posix_locks_value_destroy); } + +/* +* Currently only ext4/xfs since linux kernel v5.8 support storing +* FS_DAX_FL flag persistently. Ext4 accesses this flag through +* FS_IOC_G[S]ETFLAGS ioctl, while xfs accesses this flag through +* FS_IOC_FSG[S]ETXATTR ioctl. +*/ + res =fstatfs (fd, &statfs); +if (!res) { +if (statfs.f_type ==EXT4_SUPER_MAGIC ) + lo->perfile_dax_cap =DAX_CAP_FLAGS ; +else if (statfs.f_type ==XFS_SUPER_MAGIC ) + lo->perfile_dax_cap =DAX_CAP_XATTR ; + } }static guint lo_key_hash (gconstpointer key)Signature · 6 lines
2.27.0 _______________________________________________ Virtio-fs mailing list [email protected] https://listman.redhat.com/mailman/listinfo/virtio-fs
Signature · 2 lines
Thanks, Jeffle
Re: [Virtio-fs] [virtiofsd PATCH v4 3/4] virtiofsd: support per-file DAX negotiation in FUSE_INIT
Quoted 23 lines · * JeffleXu ([email protected]) wrote:
Quoted 13 lines · Dr. David Alan Gilbert
Quoted 11 lines · * Jeffle Xu ([email protected]) wrote:
In
FUSE_INITnegotiating phase, server/client should advertise if it supports per-file DAX.Once advertising support for per-file DAX feature, virtiofsd should support storing
FS_DAX_FLflag persistently passed by FS_IOC_SETFLAGS/FS_IOC_FSSETXATTR ioctl, and setFUSE_ATTR_DAXinFUSE_LOOKUPaccordingly if the file is capable of per-file DAX.Currently only ext4/xfs since linux kernel v5.8 support storing
FS_DAX_FLflag persistently, and thus advertise support for per-file DAX feature only when the backend fs type is ext4 and xfs.Quoted 6 lines
I'm a little worried about the meaning of the flags we're storing and the fact we're storing them in the normal host DAX flags.
Doesn't this mean that we're using a single host flag to mean:
a) It can be mapped as DAX on the host if it was a real DAX device
b) We can map it as DAX inside the guest with virtiofs?
Quoted 6 lines
Yes the side effect is that the host file is also dax enabled if the backend fs is built upon real nvdimm device.
The rationale here is that, fuse daemon shall be capable of *marking* the file as dax capable *persistently*, so that it can be informed that this file is capable of dax later.
Right, so my worry here is that the untrusted guest changes both it's own behaviour (fine) and also the behaviour of the host (less fine).
Quoted 1 line
I'm not sure if xattr (extent attribute) is a better option for this?
Well, if you used an xattr for it, it wouldn't clash with whatever the host did (especially if it used the xattr mapping).
Dave
Quoted 144 lines
Quoted 139 lines
what happens when we're using usernamespaces for the guest?
Dave
Quoted 132 lines
Signed-off-by Jeffle Xu <[email protected]>--- tools/virtiofsd/fuse_common.h | 5 +++++ tools/virtiofsd/fuse_lowlevel.c | 6 ++++++ tools/virtiofsd/passthrough_ll.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+)tools/virtiofsd/fuse_common.h +5
-0@@ -372,6 +372,11 @@ struct fuse_file_info {*/ #define FUSE_CAP_HANDLE_KILLPRIV_V2 (1 << 28) +/** +* Indicates support for per-file DAX. +*/ +#define FUSE_CAP_PERFILE_DAX (1 << 29) +/** * Ioctl flags * tools/virtiofsd/fuse_lowlevel.c +6
-0@@ -2065,6 +2065,9 @@ static void do_init(fuse_req_t req, fuse_ino_t nodeid,if (arg->flags &FUSE_HANDLE_KILLPRIV_V2 ) { se->conn.capable |=FUSE_CAP_HANDLE_KILLPRIV_V2 ; } +if (arg->flags &FUSE_PERFILE_DAX ) { + se->conn.capable |=FUSE_CAP_PERFILE_DAX ; + }#ifdef HAVE_SPLICE #ifdef HAVE_VMSPLICE se->conn.capable |=FUSE_CAP_SPLICE_WRITE |FUSE_CAP_SPLICE_MOVE ;@@ -2180,6 +2183,9 @@ static void do_init(fuse_req_t req, fuse_ino_t nodeid,if (se->conn.want &FUSE_CAP_POSIX_ACL ) { outarg.flags |=FUSE_POSIX_ACL ; } +if (se->op.ioctl && (se->conn.want &FUSE_CAP_PERFILE_DAX )) { + outarg.flags |=FUSE_PERFILE_DAX ; + } outarg.max_readahead = se->conn.max_readahead; outarg.max_write = se->conn.max_write;if (se->conn.max_background >= (1 <<16 )) {tools/virtiofsd/passthrough_ll.c +29
-0@@ -53,8 +53,10 @@#include <sys/syscall.h> #include <sys/wait.h> #include <sys/xattr.h> +#include <sys/vfs.h> #include <syslog.h> #include <linux/fs.h> +#include <linux/magic.h> #include "qemu/cutils.h" #include "passthrough_helpers.h" @@ -136,6 +138,13 @@ enum { SANDBOX_CHROOT, }; +/* capability of storing DAX flag persistently */ +enum { +DAX_CAP_NONE ,/* not supported */ +DAX_CAP_FLAGS ,/* stored in flags (FS_IOC_GETFLAGS/FS_IOC_SETFLAGS) */ +DAX_CAP_XATTR ,/* stored in xflags (FS_IOC_FSGETXATTR/FS_IOC_FSSETXATTR) */ +}; + typedef struct xattr_map_entry { char *key; char *prepend;@@ -161,6 +170,7 @@ struct lo_data {int readdirplus_clear;int allow_direct_io;int announce_submounts; +int perfile_dax_cap;/* capability of backend fs */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */ @@ -703,6 +713,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn) conn->want &= ~FUSE_CAP_HANDLE_KILLPRIV_V2 ; lo->killpriv_v2 =0 ; } + +if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { + conn->want |=FUSE_CAP_PERFILE_DAX ; + } } static void lo_getattr(fuse_req_t req, fuse_ino_t ino,@@ -3800,6 +3814,7 @@ static void setup_root(struct lo_data *lo, struct lo_inode *root)int fd, res;struct stat stat;uint64_t mnt_id; +struct statfs statfs; fd =open ("/" ,O_PATH );if (fd ==-1 ) {@@ -3826,6 +3841,20 @@ static void setup_root(struct lo_data *lo, struct lo_inode *root) root->posix_locks =g_hash_table_new_full ( g_direct_hash, g_direct_equal,NULL , posix_locks_value_destroy); } + +/* +* Currently only ext4/xfs since linux kernel v5.8 support storing +* FS_DAX_FL flag persistently. Ext4 accesses this flag through +* FS_IOC_G[S]ETFLAGS ioctl, while xfs accesses this flag through +* FS_IOC_FSG[S]ETXATTR ioctl. +*/ + res =fstatfs (fd, &statfs); +if (!res) { +if (statfs.f_type ==EXT4_SUPER_MAGIC ) + lo->perfile_dax_cap =DAX_CAP_FLAGS ; +else if (statfs.f_type ==XFS_SUPER_MAGIC ) + lo->perfile_dax_cap =DAX_CAP_XATTR ; + } }static guint lo_key_hash (gconstpointer key)Signature · 6 lines
2.27.0 _______________________________________________ Virtio-fs mailing list [email protected] https://listman.redhat.com/mailman/listinfo/virtio-fsSignature · 2 lines
Thanks, Jeffle
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Vivek Goyal
maintainerRe: [Virtio-fs] [virtiofsd PATCH v4 3/4] virtiofsd: support per-file DAX negotiation in FUSE_INIT
In reply to Dr. David Alan GilbertQuoted 13 lines · Dr. David Alan Gilbert
Quoted 11 lines · * Jeffle Xu ([email protected]) wrote:
In
FUSE_INITnegotiating phase, server/client should advertise if it supports per-file DAX.Once advertising support for per-file DAX feature, virtiofsd should support storing
FS_DAX_FLflag persistently passed by FS_IOC_SETFLAGS/FS_IOC_FSSETXATTR ioctl, and setFUSE_ATTR_DAXinFUSE_LOOKUPaccordingly if the file is capable of per-file DAX.Currently only ext4/xfs since linux kernel v5.8 support storing
FS_DAX_FLflag persistently, and thus advertise support for per-file DAX feature only when the backend fs type is ext4 and xfs.
Quoted 6 lines
I'm a little worried about the meaning of the flags we're storing and the fact we're storing them in the normal host DAX flags.
Doesn't this mean that we're using a single host flag to mean:
a) It can be mapped as DAX on the host if it was a real DAX device
b) We can map it as DAX inside the guest with virtiofs?
That's how passthrough filesystem is. Every attribute is passthrough. So if guest sets something, host sees it same way. (file uid/gid, file mode bits, xattrs etc.). Only exception now seems to be remapping of xattrs if users choses to do so.
Quoted 2 lines
what happens when we're using usernamespaces for the guest?
I don't think file attrs are namespaced. So if virtiofsd has permission do to so, it will be just able to set attrs on file.
Vivek
Quoted 139 lines
Dave
Quoted 132 lines
Signed-off-by Jeffle Xu <[email protected]>--- tools/virtiofsd/fuse_common.h | 5 +++++ tools/virtiofsd/fuse_lowlevel.c | 6 ++++++ tools/virtiofsd/passthrough_ll.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+)tools/virtiofsd/fuse_common.h +5
-0@@ -372,6 +372,11 @@ struct fuse_file_info {*/ #define FUSE_CAP_HANDLE_KILLPRIV_V2 (1 << 28) +/** +* Indicates support for per-file DAX. +*/ +#define FUSE_CAP_PERFILE_DAX (1 << 29) +/** * Ioctl flags * tools/virtiofsd/fuse_lowlevel.c +6
-0@@ -2065,6 +2065,9 @@ static void do_init(fuse_req_t req, fuse_ino_t nodeid,if (arg->flags &FUSE_HANDLE_KILLPRIV_V2 ) { se->conn.capable |=FUSE_CAP_HANDLE_KILLPRIV_V2 ; } +if (arg->flags &FUSE_PERFILE_DAX ) { + se->conn.capable |=FUSE_CAP_PERFILE_DAX ; + }#ifdef HAVE_SPLICE #ifdef HAVE_VMSPLICE se->conn.capable |=FUSE_CAP_SPLICE_WRITE |FUSE_CAP_SPLICE_MOVE ;@@ -2180,6 +2183,9 @@ static void do_init(fuse_req_t req, fuse_ino_t nodeid,if (se->conn.want &FUSE_CAP_POSIX_ACL ) { outarg.flags |=FUSE_POSIX_ACL ; } +if (se->op.ioctl && (se->conn.want &FUSE_CAP_PERFILE_DAX )) { + outarg.flags |=FUSE_PERFILE_DAX ; + } outarg.max_readahead = se->conn.max_readahead; outarg.max_write = se->conn.max_write;if (se->conn.max_background >= (1 <<16 )) {tools/virtiofsd/passthrough_ll.c +29
-0@@ -53,8 +53,10 @@#include <sys/syscall.h> #include <sys/wait.h> #include <sys/xattr.h> +#include <sys/vfs.h> #include <syslog.h> #include <linux/fs.h> +#include <linux/magic.h> #include "qemu/cutils.h" #include "passthrough_helpers.h" @@ -136,6 +138,13 @@ enum { SANDBOX_CHROOT, }; +/* capability of storing DAX flag persistently */ +enum { +DAX_CAP_NONE ,/* not supported */ +DAX_CAP_FLAGS ,/* stored in flags (FS_IOC_GETFLAGS/FS_IOC_SETFLAGS) */ +DAX_CAP_XATTR ,/* stored in xflags (FS_IOC_FSGETXATTR/FS_IOC_FSSETXATTR) */ +}; + typedef struct xattr_map_entry { char *key; char *prepend;@@ -161,6 +170,7 @@ struct lo_data {int readdirplus_clear;int allow_direct_io;int announce_submounts; +int perfile_dax_cap;/* capability of backend fs */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */ @@ -703,6 +713,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn) conn->want &= ~FUSE_CAP_HANDLE_KILLPRIV_V2 ; lo->killpriv_v2 =0 ; } + +if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { + conn->want |=FUSE_CAP_PERFILE_DAX ; + } } static void lo_getattr(fuse_req_t req, fuse_ino_t ino,@@ -3800,6 +3814,7 @@ static void setup_root(struct lo_data *lo, struct lo_inode *root)int fd, res;struct stat stat;uint64_t mnt_id; +struct statfs statfs; fd =open ("/" ,O_PATH );if (fd ==-1 ) {@@ -3826,6 +3841,20 @@ static void setup_root(struct lo_data *lo, struct lo_inode *root) root->posix_locks =g_hash_table_new_full ( g_direct_hash, g_direct_equal,NULL , posix_locks_value_destroy); } + +/* +* Currently only ext4/xfs since linux kernel v5.8 support storing +* FS_DAX_FL flag persistently. Ext4 accesses this flag through +* FS_IOC_G[S]ETFLAGS ioctl, while xfs accesses this flag through +* FS_IOC_FSG[S]ETXATTR ioctl. +*/ + res =fstatfs (fd, &statfs); +if (!res) { +if (statfs.f_type ==EXT4_SUPER_MAGIC ) + lo->perfile_dax_cap =DAX_CAP_FLAGS ; +else if (statfs.f_type ==XFS_SUPER_MAGIC ) + lo->perfile_dax_cap =DAX_CAP_XATTR ; + } }static guint lo_key_hash (gconstpointer key)Signature · 6 lines
2.27.0 _______________________________________________ Virtio-fs mailing list [email protected] https://listman.redhat.com/mailman/listinfo/virtio-fsSignature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
PATCH v4 4/4 virtiofsd: support per-file DAX in FUSE_LOOKUP
In reply to Jeffle XuFor passthrough, when the corresponding virtiofs in guest is mounted with '-o dax=inode', advertise that the file is capable of per-file DAX if the inode in the backend fs is marked with FS_DAX_FL flag.
--- tools/virtiofsd/passthrough_ll.c | 43 ++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
tools/virtiofsd/passthrough_ll.c +43 -0
@@ -171,6 +171,7 @@ struct lo_data {int allow_direct_io;int announce_submounts;int perfile_dax_cap;/* capability of backend fs */ +bool perfile_dax;/* enable per-file DAX or not */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */
@@ -716,6 +717,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn)if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { conn->want |=FUSE_CAP_PERFILE_DAX ; + lo->perfile_dax =1 ; + } +else { + lo->perfile_dax =0 ; } }
@@ -983,6 +988,41 @@ static int do_statx(struct lo_data *lo, int dirfd, const char *pathname,return 0 ; } +/* +* If the file is marked with FS_DAX_FL or FS_XFLAG_DAX, then DAX should be +* enabled for this file. +*/ +static bool lo_should_enable_dax (struct lo_data *lo,struct lo_inode *dir, +const char *name) +{ +int res, fd; +int ret = false;; +unsigned int attr; +struct fsxattr xattr; + +if (!lo->perfile_dax) +return false; + +/* Open file without O_PATH, so that ioctl can be called. */ + fd =openat (dir->fd, name,O_NOFOLLOW ); +if (fd ==-1 ) +return false; + +if (lo->perfile_dax_cap ==DAX_CAP_FLAGS ) { + res =ioctl (fd,FS_IOC_GETFLAGS , &attr); +if (!res && (attr &FS_DAX_FL )) + ret = true; + } +else if (lo->perfile_dax_cap ==DAX_CAP_XATTR ) { + res =ioctl (fd,FS_IOC_FSGETXATTR , &xattr); +if (!res && (xattr.fsx_xflags &FS_XFLAG_DAX )) + ret = true; + } + +close (fd); +return ret; +} +/* * Increments nlookup on the inode on success. unref_inode_lolocked() must be * called eventually to decrement nlookup again. If inodep is non-NULL, the
@@ -1038,6 +1078,9 @@ static int lo_do_lookup(fuse_req_t req, fuse_ino_t parent, const char *name, e->attr_flags |=FUSE_ATTR_SUBMOUNT ; } +if (lo_should_enable_dax (lo, dir, name)) + e->attr_flags |=FUSE_ATTR_DAX ; + inode =lo_find (lo, &e->attr, mnt_id);if (inode) {close (newfd);
Signature · 1 line
2.27.0
Re: [Virtio-fs] [virtiofsd PATCH v4 4/4] virtiofsd: support per-file DAX in FUSE_LOOKUP
Quoted 45 lines · * Jeffle Xu ([email protected]) wrote:
For passthrough, when the corresponding virtiofs in guest is mounted with '-o dax=inode', advertise that the file is capable of per-file DAX if the inode in the backend fs is marked with
FS_DAX_FLflag.Signed-off-by Jeffle Xu <[email protected]>--- tools/virtiofsd/passthrough_ll.c | 43 ++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)tools/virtiofsd/passthrough_ll.c +14
-0@@ -171,6 +171,7 @@ struct lo_data {int allow_direct_io;int announce_submounts;int perfile_dax_cap;/* capability of backend fs */ +bool perfile_dax;/* enable per-file DAX or not */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */ @@ -716,6 +717,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn)if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { conn->want |=FUSE_CAP_PERFILE_DAX ; + lo->perfile_dax =1 ; + } +else { + lo->perfile_dax =0 ; } }@@ -983,6 +988,41 @@ static int do_statx(struct lo_data *lo, int dirfd, const char *pathname,return 0 ; } +/* +* If the file is marked with FS_DAX_FL or FS_XFLAG_DAX, then DAX should be +* enabled for this file. +*/ +static bool lo_should_enable_dax (struct lo_data *lo,struct lo_inode *dir, +const char *name) +{ +int res, fd; +int ret = false;;
tools/virtiofsd/passthrough_ll.c static int do_statx(struct lo_data *lo, int dirfd, const char *pathname, · line 1009
Quoted 10 lines
tools/virtiofsd/passthrough_ll.c +10
-0+unsigned int attr; +struct fsxattr xattr; + +if (!lo->perfile_dax) +return false; + +/* Open file without O_PATH, so that ioctl can be called. */ + fd =openat (dir->fd, name,O_NOFOLLOW ); +if (fd ==-1 ) +return false;
Doesn't that defeat the whole benefit of using O_PATH - i.e. that we might stumble into a /dev node or something else we're not allowed to open?
tools/virtiofsd/passthrough_ll.c static int do_statx(struct lo_data *lo, int dirfd, const char *pathname, · line 1020
Quoted 10 lines
tools/virtiofsd/passthrough_ll.c +10
-0+if (lo->perfile_dax_cap ==DAX_CAP_FLAGS ) { + res =ioctl (fd,FS_IOC_GETFLAGS , &attr); +if (!res && (attr &FS_DAX_FL )) + ret = true; + } +else if (lo->perfile_dax_cap ==DAX_CAP_XATTR ) { + res =ioctl (fd,FS_IOC_FSGETXATTR , &xattr); +if (!res && (xattr.fsx_xflags &FS_XFLAG_DAX )) + ret = true; + }
This all looks pretty expensive for each lookup.
Dave
Quoted 25 lines
tools/virtiofsd/passthrough_ll.c +7
-0+close (fd); +return ret; +} +/* * Increments nlookup on the inode on success. unref_inode_lolocked() must be * called eventually to decrement nlookup again. If inodep is non-NULL, the @@ -1038,6 +1078,9 @@ static int lo_do_lookup(fuse_req_t req, fuse_ino_t parent, const char *name, e->attr_flags |=FUSE_ATTR_SUBMOUNT ; } +if (lo_should_enable_dax (lo, dir, name)) + e->attr_flags |=FUSE_ATTR_DAX ; + inode =lo_find (lo, &e->attr, mnt_id);if (inode) {close (newfd);Signature · 6 lines
2.27.0 _______________________________________________ Virtio-fs mailing list [email protected] https://listman.redhat.com/mailman/listinfo/virtio-fs
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [Virtio-fs] [virtiofsd PATCH v4 4/4] virtiofsd: support per-file DAX in FUSE_LOOKUP
Quoted 52 lines · Dr. David Alan Gilbert
Quoted 51 lines · * Jeffle Xu ([email protected]) wrote:
For passthrough, when the corresponding virtiofs in guest is mounted with '-o dax=inode', advertise that the file is capable of per-file DAX if the inode in the backend fs is marked with
FS_DAX_FLflag.Signed-off-by Jeffle Xu <[email protected]>--- tools/virtiofsd/passthrough_ll.c | 43 ++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)tools/virtiofsd/passthrough_ll.c +20
-0@@ -171,6 +171,7 @@ struct lo_data {int allow_direct_io;int announce_submounts;int perfile_dax_cap;/* capability of backend fs */ +bool perfile_dax;/* enable per-file DAX or not */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */ @@ -716,6 +717,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn)if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { conn->want |=FUSE_CAP_PERFILE_DAX ; + lo->perfile_dax =1 ; + } +else { + lo->perfile_dax =0 ; } }@@ -983,6 +988,41 @@ static int do_statx(struct lo_data *lo, int dirfd, const char *pathname,return 0 ; } +/* +* If the file is marked with FS_DAX_FL or FS_XFLAG_DAX, then DAX should be +* enabled for this file. +*/ +static bool lo_should_enable_dax (struct lo_data *lo,struct lo_inode *dir, +const char *name) +{ +int res, fd; +int ret = false;; +unsigned int attr; +struct fsxattr xattr; + +if (!lo->perfile_dax) +return false; +
Quoted 8 lines
tools/virtiofsd/passthrough_ll.c static int do_statx(struct lo_data *lo, int dirfd, const char *pathname, · line 1009
Quoted 4 lines
tools/virtiofsd/passthrough_ll.c +4
-0+/* Open file without O_PATH, so that ioctl can be called. */ + fd =openat (dir->fd, name,O_NOFOLLOW ); +if (fd ==-1 ) +return false;Doesn't that defeat the whole benefit of using
O_PATH- i.e. that we might stumble into a /dev node or something else we're not allowed to open?
As far as I know, virtiofsd will pivot_root/chroot to the source directory, and can only access files inside the source directory specified by "-o source=". Then where do these unexpected files come from? Besides, fd opened without O_PATH here is temporary and used for FS_IOC_GETFLAGS/FS_IOC_FSGETXATTR ioctl only. It's closed when the function returns.
Quoted 13 lines
tools/virtiofsd/passthrough_ll.c static int do_statx(struct lo_data *lo, int dirfd, const char *pathname, · line 1020
Quoted 11 lines
tools/virtiofsd/passthrough_ll.c +10
-0+if (lo->perfile_dax_cap ==DAX_CAP_FLAGS ) { + res =ioctl (fd,FS_IOC_GETFLAGS , &attr); +if (!res && (attr &FS_DAX_FL )) + ret = true; + } +else if (lo->perfile_dax_cap ==DAX_CAP_XATTR ) { + res =ioctl (fd,FS_IOC_FSGETXATTR , &xattr); +if (!res && (xattr.fsx_xflags &FS_XFLAG_DAX )) + ret = true; + }This all looks pretty expensive for each lookup.
Yes. it can be somehow optimized if we can agree on the way of storing the dax flag persistently.
Signature · 2 lines
Thanks, Jeffle
Re: [Virtio-fs] [virtiofsd PATCH v4 4/4] virtiofsd: support per-file DAX in FUSE_LOOKUP
Quoted 64 lines · * JeffleXu ([email protected]) wrote:
Quoted 52 lines · Dr. David Alan Gilbert
Quoted 51 lines · * Jeffle Xu ([email protected]) wrote:
For passthrough, when the corresponding virtiofs in guest is mounted with '-o dax=inode', advertise that the file is capable of per-file DAX if the inode in the backend fs is marked with
FS_DAX_FLflag.Signed-off-by Jeffle Xu <[email protected]>--- tools/virtiofsd/passthrough_ll.c | 43 ++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)tools/virtiofsd/passthrough_ll.c +20
-0@@ -171,6 +171,7 @@ struct lo_data {int allow_direct_io;int announce_submounts;int perfile_dax_cap;/* capability of backend fs */ +bool perfile_dax;/* enable per-file DAX or not */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */ @@ -716,6 +717,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn)if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { conn->want |=FUSE_CAP_PERFILE_DAX ; + lo->perfile_dax =1 ; + } +else { + lo->perfile_dax =0 ; } }@@ -983,6 +988,41 @@ static int do_statx(struct lo_data *lo, int dirfd, const char *pathname,return 0 ; } +/* +* If the file is marked with FS_DAX_FL or FS_XFLAG_DAX, then DAX should be +* enabled for this file. +*/ +static bool lo_should_enable_dax (struct lo_data *lo,struct lo_inode *dir, +const char *name) +{ +int res, fd; +int ret = false;; +unsigned int attr; +struct fsxattr xattr; + +if (!lo->perfile_dax) +return false; +Quoted 8 lines
tools/virtiofsd/passthrough_ll.c static int do_statx(struct lo_data *lo, int dirfd, const char *pathname, · line 1009
Quoted 4 lines
tools/virtiofsd/passthrough_ll.c +4
-0+/* Open file without O_PATH, so that ioctl can be called. */ + fd =openat (dir->fd, name,O_NOFOLLOW ); +if (fd ==-1 ) +return false;Doesn't that defeat the whole benefit of using
O_PATH- i.e. that we might stumble into a /dev node or something else we're not allowed to open?
Quoted 6 lines
As far as I know, virtiofsd will pivot_root/chroot to the source directory, and can only access files inside the source directory specified by "-o source=". Then where do these unexpected files come from? Besides, fd opened without
O_PATHhere is temporary and used for FS_IOC_GETFLAGS/FS_IOC_FSGETXATTR ioctl only. It's closed when the function returns.
The guest is still allowed to mknod.
See:
https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05461.html
also it's legal to expose a root filesystem for a guest; the virtiofsd should *never* open a device other than O_PATH - and it's really tricky to do a check to see if it is a device in a race-free way.
Quoted 14 lines
Quoted 13 lines
tools/virtiofsd/passthrough_ll.c static int do_statx(struct lo_data *lo, int dirfd, const char *pathname, · line 1020
Quoted 11 lines
tools/virtiofsd/passthrough_ll.c +10
-0+if (lo->perfile_dax_cap ==DAX_CAP_FLAGS ) { + res =ioctl (fd,FS_IOC_GETFLAGS , &attr); +if (!res && (attr &FS_DAX_FL )) + ret = true; + } +else if (lo->perfile_dax_cap ==DAX_CAP_XATTR ) { + res =ioctl (fd,FS_IOC_FSGETXATTR , &xattr); +if (!res && (xattr.fsx_xflags &FS_XFLAG_DAX )) + ret = true; + }This all looks pretty expensive for each lookup.
Quoted 2 lines
Yes. it can be somehow optimized if we can agree on the way of storing the dax flag persistently.
Dave
Quoted 4 lines
Signature · 2 lines
Thanks, Jeffle
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [Virtio-fs] [virtiofsd PATCH v4 4/4] virtiofsd: support per-file DAX in FUSE_LOOKUP
Quoted 72 lines · Dr. David Alan Gilbert
Quoted 64 lines · * JeffleXu ([email protected]) wrote:
Quoted 52 lines · Dr. David Alan Gilbert
Quoted 51 lines · * Jeffle Xu ([email protected]) wrote:
For passthrough, when the corresponding virtiofs in guest is mounted with '-o dax=inode', advertise that the file is capable of per-file DAX if the inode in the backend fs is marked with
FS_DAX_FLflag.Signed-off-by Jeffle Xu <[email protected]>--- tools/virtiofsd/passthrough_ll.c | 43 ++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)tools/virtiofsd/passthrough_ll.c +20
-0@@ -171,6 +171,7 @@ struct lo_data {int allow_direct_io;int announce_submounts;int perfile_dax_cap;/* capability of backend fs */ +bool perfile_dax;/* enable per-file DAX or not */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */ @@ -716,6 +717,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn)if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { conn->want |=FUSE_CAP_PERFILE_DAX ; + lo->perfile_dax =1 ; + } +else { + lo->perfile_dax =0 ; } }@@ -983,6 +988,41 @@ static int do_statx(struct lo_data *lo, int dirfd, const char *pathname,return 0 ; } +/* +* If the file is marked with FS_DAX_FL or FS_XFLAG_DAX, then DAX should be +* enabled for this file. +*/ +static bool lo_should_enable_dax (struct lo_data *lo,struct lo_inode *dir, +const char *name) +{ +int res, fd; +int ret = false;; +unsigned int attr; +struct fsxattr xattr; + +if (!lo->perfile_dax) +return false; +Quoted 8 lines
tools/virtiofsd/passthrough_ll.c static int do_statx(struct lo_data *lo, int dirfd, const char *pathname, · line 1009
Quoted 4 lines
tools/virtiofsd/passthrough_ll.c +4
-0+/* Open file without O_PATH, so that ioctl can be called. */ + fd =openat (dir->fd, name,O_NOFOLLOW ); +if (fd ==-1 ) +return false;Doesn't that defeat the whole benefit of using
O_PATH- i.e. that we might stumble into a /dev node or something else we're not allowed to open?Quoted 6 lines
As far as I know, virtiofsd will pivot_root/chroot to the source directory, and can only access files inside the source directory specified by "-o source=". Then where do these unexpected files come from? Besides, fd opened without
O_PATHhere is temporary and used for FS_IOC_GETFLAGS/FS_IOC_FSGETXATTR ioctl only. It's closed when the function returns.
Quoted 8 lines
The guest is still allowed to mknod.
See:https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05461.htmlalso it's legal to expose a root filesystem for a guest; the virtiofsd should *never* open a device other than
O_PATH- and it's really tricky to do a check to see if it is a device in a race-free way.
Fine. Got it. However the returned fd (opened without O_PATH) is only used for FS_IOC_GETFLAGS/FS_IOC_FSGETXATTR ioctl, while in most cases for special device files, these two ioctls should return -ENOTTY.
If it's really a security issue, then lo_inode_open() could be used to get a temporary fd, i.e., check if it's a special file before opening. After all, FUSE_OPEN also handles in this way. Besides, I can't understand what "race-free way" means.
Signature · 2 lines
Thanks, Jeffle
Re: [Virtio-fs] [virtiofsd PATCH v4 4/4] virtiofsd: support per-file DAX in FUSE_LOOKUP
Quoted 79 lines · On Fri, 20 Aug 2021 13:03:23 +0800 JeffleXu <[email protected]> wrote:
Quoted 76 lines · Dr. David Alan Gilbert
Quoted 64 lines · * JeffleXu ([email protected]) wrote:
Quoted 52 lines · Dr. David Alan Gilbert
Quoted 51 lines · * Jeffle Xu ([email protected]) wrote:
For passthrough, when the corresponding virtiofs in guest is mounted with '-o dax=inode', advertise that the file is capable of per-file DAX if the inode in the backend fs is marked with
FS_DAX_FLflag.Signed-off-by Jeffle Xu <[email protected]>--- tools/virtiofsd/passthrough_ll.c | 43 ++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)tools/virtiofsd/passthrough_ll.c +20
-0@@ -171,6 +171,7 @@ struct lo_data {int allow_direct_io;int announce_submounts;int perfile_dax_cap;/* capability of backend fs */ +bool perfile_dax;/* enable per-file DAX or not */ bool use_statx;struct lo_inode root;GHashTable *inodes;/* protected by lo->mutex */ @@ -716,6 +717,10 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn)if (conn->capable &FUSE_CAP_PERFILE_DAX && lo->perfile_dax_cap ) { conn->want |=FUSE_CAP_PERFILE_DAX ; + lo->perfile_dax =1 ; + } +else { + lo->perfile_dax =0 ; } }@@ -983,6 +988,41 @@ static int do_statx(struct lo_data *lo, int dirfd, const char *pathname,return 0 ; } +/* +* If the file is marked with FS_DAX_FL or FS_XFLAG_DAX, then DAX should be +* enabled for this file. +*/ +static bool lo_should_enable_dax (struct lo_data *lo,struct lo_inode *dir, +const char *name) +{ +int res, fd; +int ret = false;; +unsigned int attr; +struct fsxattr xattr; + +if (!lo->perfile_dax) +return false; +Quoted 8 lines
tools/virtiofsd/passthrough_ll.c static int do_statx(struct lo_data *lo, int dirfd, const char *pathname, · line 1009
Quoted 4 lines
tools/virtiofsd/passthrough_ll.c +4
-0+/* Open file without O_PATH, so that ioctl can be called. */ + fd =openat (dir->fd, name,O_NOFOLLOW ); +if (fd ==-1 ) +return false;Doesn't that defeat the whole benefit of using
O_PATH- i.e. that we might stumble into a /dev node or something else we're not allowed to open?Quoted 6 lines
As far as I know, virtiofsd will pivot_root/chroot to the source directory, and can only access files inside the source directory specified by "-o source=". Then where do these unexpected files come from? Besides, fd opened without
O_PATHhere is temporary and used for FS_IOC_GETFLAGS/FS_IOC_FSGETXATTR ioctl only. It's closed when the function returns.The guest is still allowed to mknod.
See:https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05461.html
Quoted 9 lines
Quoted 4 lines
also it's legal to expose a root filesystem for a guest; the virtiofsd should *never* open a device other than
O_PATH- and it's really tricky to do a check to see if it is a device in a race-free way.Fine. Got it. However the returned fd (opened without
O_PATH) is only used for FS_IOC_GETFLAGS/FS_IOC_FSGETXATTR ioctl, while in most cases for special device files, these two ioctls should return-ENOTTY.
The actual problem is that a FIFO will cause openat() to block until the other end of the FIFO is open for writing...
Quoted 1 line
If it's really a security issue, then
lo_inode_open()could be used to
... and cause a DoS on virtiofsd. So yes, this is a security issue and lo_inode_open() was introduced specifically to handle this.
Quoted 4 lines
get a temporary fd, i.e., check if it's a special file before opening. After all,
FUSE_OPENalso handles in this way. Besides, I can't understand what "race-free way" means.
"race-free way" means a way that guarantees that file type cannot change between the time you check it and the time you open it (TOCTOU error). For example, doing a plain stat(), checking st_mode and proceeding to open() is wrong : nothing prevents the file to be unlinked and replaced by something else between stat() and open().
We avoid that by keeping O_PATH fds around and using lo_inode_open() instead of openat().
In your case, it seems that you should do the checking after you have an actual lo_inode for the target file, and pass that to lo_should_enable_dax() instead of the parent lo_inode and target name.
Cheers,
--
Greg
Re: [Virtio-fs] [virtiofsd PATCH v4 4/4] virtiofsd: support per-file DAX in FUSE_LOOKUP
Quoted 10 lines · Greg Kurz
Quoted 5 lines · On Fri, 20 Aug 2021 13:03:23 +0800 JeffleXu <[email protected]> wrote:
Fine. Got it. However the returned fd (opened without
O_PATH) is only used for FS_IOC_GETFLAGS/FS_IOC_FSGETXATTR ioctl, while in most cases for special device files, these two ioctls should return-ENOTTY.The actual problem is that a FIFO will cause
openat()to block until the other end of the FIFO is open for writing...
Got it.
Quoted 18 lines
Quoted 2 lines
If it's really a security issue, then
lo_inode_open()could be used to... and cause a DoS on virtiofsd. So yes, this is a security issue and
lo_inode_open()was introduced specifically to handle this.Quoted 4 lines
get a temporary fd, i.e., check if it's a special file before opening. After all,
FUSE_OPENalso handles in this way. Besides, I can't understand what "race-free way" means."race-free way" means a way that guarantees that file type cannot change between the time you check it and the time you open it (TOCTOU error). For example, doing a plain
stat(), checkingst_modeand proceeding toopen()is wrong : nothing prevents the file to be unlinked and replaced by something else betweenstat()andopen().
Quoted 2 lines
We avoid that by keeping
O_PATHfds around and usinglo_inode_open()instead ofopenat().
Thanks for the detailed explanation. Got it.
Quoted 6 lines
In your case, it seems that you should do the checking after you have an actual
lo_inodefor the target file, and pass that tolo_should_enable_dax()instead of the parentlo_inodeand target name.
Yes, that will be more reasonable. Thanks.
Signature · 2 lines
Thanks, Jeffle
Miklos Szeredi
maintainerQuoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Thanks,
Miklos
Quoted 9 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
Dave
Quoted 8 lines
Thanks,
Miklos_______________________________________________
Virtio-fs mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/virtio-fs
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Miklos Szeredi
maintainerQuoted 9 lines · Dr. David Alan Gilbert
Quoted 7 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Quoted 7 lines
Quoted 2 lines
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
If this is a performance issue, it should be fixed in a way that doesn't require hand tuning like you suggest, I think.
I'm not sure what the ext4/xfs case for per-file DAX is. Maybe that can help understand the virtiofs case as well.
Thanks,
Miklos
Quoted 14 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 12 lines · Dr. David Alan Gilbert
Quoted 9 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Quoted 7 lines
Quoted 4 lines
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
If this is a performance issue, it should be fixed in a way that doesn't require hand tuning like you suggest, I think.
I'd agree that would be nice; however:
a) It looks like other filesystems already gave something admin
selectable
b) Trying to write clever heuristics is only going to work in some
cases; being able to say 'DAX this directory' might work better in practice.
Quoted 2 lines
I'm not sure what the ext4/xfs case for per-file DAX is. Maybe that can help understand the virtiofs case as well.
Yep, I don't understand the case with real nvdimm hardware.
Dave
Quoted 3 lines
Thanks,
Miklos
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 19 lines · Miklos Szeredi
Quoted 9 lines · Dr. David Alan Gilbert
Quoted 7 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Quoted 7 lines
Quoted 2 lines
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
Quoted 6 lines
If this is a performance issue, it should be fixed in a way that doesn't require hand tuning like you suggest, I think.
I'm not sure what the ext4/xfs case for per-file DAX is. Maybe that can help understand the virtiofs case as well.
Some hints why ext4/xfs support per-file DAX can be found [1] and [2].
"Boaz Harrosh wondered why someone might want to turn DAX off for a persistent memory device. Hellwig said that the performance "could suck"; Williams noted that the page cache could be useful for some applications as well. Jan Kara pointed out that reads from persistent memory are close to DRAM speed, but that writes are not; the page cache could be helpful for frequent writes. Applications need to change to fully take advantage of DAX, Williams said; part of the promise of adding a flag is that users can do DAX on smaller granularities than a full filesystem."
In summary, page cache is preferable in some cases, and thus more fine grained way of DAX control is needed.
As for virtiofs, Dr. David Alan Gilbert has mentioned that various files may compete for limited DAX window resource.
Besides, supporting DAX for small files can be expensive. Small files can consume DAX window resource rapidly, and if small files are accessed only once, the cost of mmap/munmap on host can not be ignored.
[1]
https://lore.kernel.org/lkml/[email protected]/
[2] https://lwn.net/Articles/787973/
Signature · 2 lines
Thanks, Jeffle
Miklos Szeredi
maintainerQuoted 42 lines · JeffleXu
Quoted 19 lines · Miklos Szeredi
Quoted 9 lines · Dr. David Alan Gilbert
Quoted 7 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Quoted 7 lines
Quoted 2 lines
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
Quoted 6 lines
If this is a performance issue, it should be fixed in a way that doesn't require hand tuning like you suggest, I think.
I'm not sure what the ext4/xfs case for per-file DAX is. Maybe that can help understand the virtiofs case as well.
Some hints why ext4/xfs support per-file DAX can be found [1] and [2].
"Boaz Harrosh wondered why someone might want to turn DAX off for a persistent memory device. Hellwig said that the performance "could suck"; Williams noted that the page cache could be useful for some applications as well. Jan Kara pointed out that reads from persistent memory are close to DRAM speed, but that writes are not; the page cache could be helpful for frequent writes. Applications need to change to fully take advantage of DAX, Williams said; part of the promise of adding a flag is that users can do DAX on smaller granularities than a full filesystem."
Quoted 2 lines
In summary, page cache is preferable in some cases, and thus more fine grained way of DAX control is needed.
Hmm, okay, very frequent overwrites could be problematic for directly mapped nvram.
Quoted 7 lines
As for virtiofs, Dr. David Alan Gilbert has mentioned that various files may compete for limited DAX window resource.
Besides, supporting DAX for small files can be expensive. Small files can consume DAX window resource rapidly, and if small files are accessed only once, the cost of mmap/munmap on host can not be ignored.
That's a good point. Maybe we should disable DAX for file sizes much
smaller than the chunk size?
Thanks,
Miklos
Vivek Goyal
maintainerOn Tue, Aug 17, 2021 at 04:11:14PM +0200, Miklos Szeredi wrote:
[..]
Quoted 9 lines
Quoted 6 lines
As for virtiofs, Dr. David Alan Gilbert has mentioned that various files may compete for limited DAX window resource.
Besides, supporting DAX for small files can be expensive. Small files can consume DAX window resource rapidly, and if small files are accessed only once, the cost of mmap/munmap on host can not be ignored.
That's a good point. Maybe we should disable DAX for file sizes much
smaller than the chunk size?
This indeed seems like a valid concern. 2MB chunk size will consume 512 struct page entries. If an entry is 64 bytes in size, then that's 32K RAM used to access 4K bytes of file. Does not sound like good usage of resources.
If we end up selectively disabling dax based on file size, two things come to me mind.
- Will be good if it is users can opt-in for this behavior. There might be a class of users who always want to enable dax on all files.
- Secondly, we will have to figure out how to do it safely in the event of shared filesystem where file size can change suddenly. Will need to make sure change from dax to no-dax and vice-versa is safe w.r.t page cache and other paths.
Thanks
Vivek
Vivek Goyal
maintainerQuoted 41 lines · JeffleXu
Quoted 19 lines · Miklos Szeredi
Quoted 9 lines · Dr. David Alan Gilbert
Quoted 7 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Quoted 7 lines
Quoted 2 lines
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
Quoted 6 lines
If this is a performance issue, it should be fixed in a way that doesn't require hand tuning like you suggest, I think.
I'm not sure what the ext4/xfs case for per-file DAX is. Maybe that can help understand the virtiofs case as well.
Some hints why ext4/xfs support per-file DAX can be found [1] and [2].
"Boaz Harrosh wondered why someone might want to turn DAX off for a persistent memory device. Hellwig said that the performance "could suck"; Williams noted that the page cache could be useful for some applications as well. Jan Kara pointed out that reads from persistent memory are close to DRAM speed, but that writes are not; the page cache could be helpful for frequent writes. Applications need to change to fully take advantage of DAX, Williams said; part of the promise of adding a flag is that users can do DAX on smaller granularities than a full filesystem."
Quoted 2 lines
In summary, page cache is preferable in some cases, and thus more fine grained way of DAX control is needed.
In case of virtiofs, we are using page cache on host. So this probably is not a factor for us. Writes will go in page cache of host.
Quoted 8 lines
As for virtiofs, Dr. David Alan Gilbert has mentioned that various files may compete for limited DAX window resource.
Besides, supporting DAX for small files can be expensive. Small files can consume DAX window resource rapidly, and if small files are accessed only once, the cost of mmap/munmap on host can not be ignored.
W.r.r access pattern, same applies to large files also. So if a section of large file is accessed only once, it will consume dax window as well and will have to be reclaimed.
Dax in virtiofs provides speed gain only if map file once and access it multiple times. If that pattern does not hold true, then dax does not seem to provide speed gains and in fact might be slower than non-dax.
So if there is a pattern where we know some files are accessed repeatedly while others are not, then enabling/disabling dax selectively will make sense. Question is how many workloads really know that and how will you make that decision. Do you have any data to back that up.
W.r.t small file, is that a real concern. If that file is being accessed mutliple times, then we will still see the speed gain. Only down side is that there is little wastage of resources because our minimum dax mapping granularity is 2MB. I am wondering can we handle that by supporting other dax mapping granularities as well. say 256K and let users choose it.
Thanks
Vivek
Quoted 10 lines
[1]
https://lore.kernel.org/lkml/[email protected]/
[2] https://lwn.net/Articles/787973/Signature · 2 lines
Thanks, Jeffle
Quoted 66 lines · Vivek Goyal
Quoted 41 lines · JeffleXu
Quoted 19 lines · Miklos Szeredi
Quoted 9 lines · Dr. David Alan Gilbert
Quoted 7 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Quoted 7 lines
Quoted 2 lines
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
Quoted 6 lines
If this is a performance issue, it should be fixed in a way that doesn't require hand tuning like you suggest, I think.
I'm not sure what the ext4/xfs case for per-file DAX is. Maybe that can help understand the virtiofs case as well.
Some hints why ext4/xfs support per-file DAX can be found [1] and [2].
"Boaz Harrosh wondered why someone might want to turn DAX off for a persistent memory device. Hellwig said that the performance "could suck"; Williams noted that the page cache could be useful for some applications as well. Jan Kara pointed out that reads from persistent memory are close to DRAM speed, but that writes are not; the page cache could be helpful for frequent writes. Applications need to change to fully take advantage of DAX, Williams said; part of the promise of adding a flag is that users can do DAX on smaller granularities than a full filesystem."
Quoted 2 lines
In summary, page cache is preferable in some cases, and thus more fine grained way of DAX control is needed.
In case of virtiofs, we are using page cache on host. So this probably is not a factor for us. Writes will go in page cache of host.
Quoted 8 lines
As for virtiofs, Dr. David Alan Gilbert has mentioned that various files may compete for limited DAX window resource.
Besides, supporting DAX for small files can be expensive. Small files can consume DAX window resource rapidly, and if small files are accessed only once, the cost of mmap/munmap on host can not be ignored.
W.r.r access pattern, same applies to large files also. So if a section of large file is accessed only once, it will consume dax window as well and will have to be reclaimed.
Dax in virtiofs provides speed gain only if map file once and access it multiple times. If that pattern does not hold true, then dax does not seem to provide speed gains and in fact might be slower than non-dax.
Quoted 4 lines
So if there is a pattern where we know some files are accessed repeatedly while others are not, then enabling/disabling dax selectively will make sense. Question is how many workloads really know that and how will you make that decision. Do you have any data to back that up.
There's no precise performance data yet. Empirically, small files used to have worse performance with dax, while frequently accessed files (such as .so libraries) behave better with dax.
Quoted 7 lines
W.r.t small file, is that a real concern. If that file is being accessed mutliple times, then we will still see the speed gain. Only down side is that there is little wastage of resources because our minimum dax mapping granularity is 2MB. I am wondering can we handle that by supporting other dax mapping granularities as well. say 256K and let users choose it.
Signature · 2 lines
Thanks, Jeffle
On 8/17/21 10:54 PM, Vivek Goyal wrote:
[...]
Quoted 17 lines
Quoted 7 lines
As for virtiofs, Dr. David Alan Gilbert has mentioned that various files may compete for limited DAX window resource.
Besides, supporting DAX for small files can be expensive. Small files can consume DAX window resource rapidly, and if small files are accessed only once, the cost of mmap/munmap on host can not be ignored.
W.r.r access pattern, same applies to large files also. So if a section of large file is accessed only once, it will consume dax window as well and will have to be reclaimed.
Dax in virtiofs provides speed gain only if map file once and access it multiple times. If that pattern does not hold true, then dax does not seem to provide speed gains and in fact might be slower than non-dax.
Quoted 4 lines
So if there is a pattern where we know some files are accessed repeatedly while others are not, then enabling/disabling dax selectively will make sense. Question is how many workloads really know that and how will you make that decision. Do you have any data to back that up.
Empirically, some files are naturally accessed only once, such as configuration files under /etc/ directory, .py, .js files, etc. It's the real case that we have met in real world. While some others are most likely accessed multiple times, such as .so libraries. With per-file DAX feature, administrator can decide on their own which files shall be dax enabled and thus gain most benefit from dax, while others not.
As for how we can distinguish the file access mode, besides the intuitive insights described previously, we can develop more advanced method distinguishing it, e.g., scanning the DAX window map and finding the hot files. With the mechanism offered by kernel, more advanced strategy can be developed then.
Quoted 8 lines
W.r.t small file, is that a real concern. If that file is being accessed mutliple times, then we will still see the speed gain. Only down side is that there is little wastage of resources because our minimum dax mapping granularity is 2MB. I am wondering can we handle that by supporting other dax mapping granularities as well. say 256K and let users choose it.
Signature · 2 lines
Thanks, Jeffle
Vivek Goyal
maintainerQuoted 8 lines · Dr. David Alan Gilbert
Quoted 7 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Quoted 7 lines
Quoted 2 lines
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
In that case probaly we should just make DAX window larger. I assume that selecting which files to turn DAX on, will itself will not be a trivial. Not sure what heuristics are being deployed to determine that. Will like to know more about it.
Vivek
Hi, I add some performance statistics below.
Quoted 9 lines · Vivek Goyal
Quoted 8 lines · Dr. David Alan Gilbert
Quoted 7 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
Yes, the performance of dax can be limited when the DAX window is limited, where dax window may be contended by multiple files.
I tested kernel compiling in virtiofs, emulating the scenario where a lot of files contending dax window and triggering dax window reclaiming.
Environment setup:
- guest vCPU: 16
- time make vmlinux -j128
type | cache | cache-size | time ------- | ------ | ---------- | ---- non-dax | always | -- | real 2m48.119s dax | always | 64M | real 4m49.563s dax | always | 1G | real 3m14.200s dax | always | 4G | real 2m41.141s
It can be seen that there's performance drop, comparing to the normal buffered IO, when dax window resource is restricted and dax window relcaiming is triggered. The smaller the cache size is, the worse the performance is. The performance drop can be alleviated and eliminated as cache size increases.
Though we may not compile kernel in virtiofs, indeed we may access a lot of small files in virtiofs and suffer this performance drop.
Quoted 1 line
In that case probaly we should just make DAX window larger. I assume
Yes, as the DAX window gets larger, it is less likely that we can run short of dax window resource.
However it doesn't come without cost. 'struct page' descriptor for dax window will consume guest memory at a ratio of ~1.5% (64/4096 = ~1.5%, page descriptor is of 64 bytes size, assuming 4K sized page). That is, every 1GB cache size will cost 16MB guest memory. As the cache size increases, the memory footprint for page descriptors also increases, which may offset the benefit of dax by eliminating guest page cache.
In summary, per-file dax feature tries to achieve a balance between performance and memory overhead, by offering a finer gained control for dax to users.
Quoted 3 lines
that selecting which files to turn DAX on, will itself will not be a trivial. Not sure what heuristics are being deployed to determine that. Will like to know more about it.
Currently we enable dax for hot and large blob files, while disabling dax for other miscellaneous small files.
Signature · 2 lines
Thanks, Jeffle
Hi Vivek, Miklos,
Quoted 61 lines · JeffleXu
Hi, I add some performance statistics below.
Quoted 9 lines · Vivek Goyal
Quoted 8 lines · Dr. David Alan Gilbert
Quoted 7 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
Yes, the performance of dax can be limited when the DAX window is limited, where dax window may be contended by multiple files.
I tested kernel compiling in virtiofs, emulating the scenario where a lot of files contending dax window and triggering dax window reclaiming.
Environment setup:
- guest vCPU: 16
- time make vmlinux -j128type | cache | cache-size | time ------- | ------ | ---------- | ---- non-dax | always | -- | real 2m48.119s dax | always | 64M | real 4m49.563s dax | always | 1G | real 3m14.200s dax | always | 4G | real 2m41.141sIt can be seen that there's performance drop, comparing to the normal buffered IO, when dax window resource is restricted and dax window relcaiming is triggered. The smaller the cache size is, the worse the performance is. The performance drop can be alleviated and eliminated as cache size increases.
Though we may not compile kernel in virtiofs, indeed we may access a lot of small files in virtiofs and suffer this performance drop.
Quoted 1 line
In that case probaly we should just make DAX window larger. I assume
Yes, as the DAX window gets larger, it is less likely that we can run short of dax window resource.
However it doesn't come without cost. 'struct page' descriptor for dax window will consume guest memory at a ratio of ~1.5% (64/4096 = ~1.5%, page descriptor is of 64 bytes size, assuming 4K sized page). That is, every 1GB cache size will cost 16MB guest memory. As the cache size increases, the memory footprint for page descriptors also increases, which may offset the benefit of dax by eliminating guest page cache.
Quoted 4 lines
In summary, per-file dax feature tries to achieve a balance between performance and memory overhead, by offering a finer gained control for dax to users.
I'm not sure if this is adequate for introducing per-file dax feature to community? Need some feedback from the community.
And if that's the case, I also want to know if setting/clearing S_DAX inside guest is needed, since in our internal using scenario, setting S_DAX from host daemon is adequate. If setting/clearing S_DAX inside guest can be omitted then, the negotiation during FUSE_INIT phase is not needed either. After all we could completely rely on the FUSE_ATTR_DAX flag feeded by host daemon to see if dax shall be enabled or not for corresponding file. The whole patch set will also be somehow simper then.
Signature · 2 lines
Thanks, Jeffle
Vivek Goyal
maintainerQuoted 39 lines · JeffleXu
Hi, I add some performance statistics below.
Quoted 9 lines · Vivek Goyal
Quoted 8 lines · Dr. David Alan Gilbert
Quoted 7 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
Yes, the performance of dax can be limited when the DAX window is limited, where dax window may be contended by multiple files.
I tested kernel compiling in virtiofs, emulating the scenario where a lot of files contending dax window and triggering dax window reclaiming.
Environment setup:
- guest vCPU: 16
- time make vmlinux -j128type | cache | cache-size | time ------- | ------ | ---------- | ---- non-dax | always | -- | real 2m48.119s dax | always | 64M | real 4m49.563s dax | always | 1G | real 3m14.200s dax | always | 4G | real 2m41.141s
Quoted 8 lines
It can be seen that there's performance drop, comparing to the normal buffered IO, when dax window resource is restricted and dax window relcaiming is triggered. The smaller the cache size is, the worse the performance is. The performance drop can be alleviated and eliminated as cache size increases.
Though we may not compile kernel in virtiofs, indeed we may access a lot of small files in virtiofs and suffer this performance drop.
Hi Jeffle,
If you access lot of big files or a file bigger than dax window, still you will face performance drop due to reclaim. IOW, if data being accessed is bigger than dax window, then reclaim will trigger and performance drop will be observed. So I think its not fair to assciate performance drop with big for small files as such.
What makes more sense is that memomry usage argument you have used later in the email. That is, we have a fixed chunk size of 2MB. And that means we use 512 * 64 = 32K of memory per chunk. So if a file is smaller than 32K in size, it might be better to just access it without DAX and incur the cost of page cache in guest instead. Even this argument also works only if dax window is being utilized fully.
Anyway, I think Miklos already asked you to send patches so that virtiofs daemon specifies which file to use dax on. So are you planning to post patches again for that. (And drop patches to read dax attr from per inode from filesystem in guest).
Thanks
Vivek
Quoted 32 lines
Quoted 3 lines
In that case probaly we should just make DAX window larger. I assume
Yes, as the DAX window gets larger, it is less likely that we can run short of dax window resource.
However it doesn't come without cost. 'struct page' descriptor for dax window will consume guest memory at a ratio of ~1.5% (64/4096 = ~1.5%, page descriptor is of 64 bytes size, assuming 4K sized page). That is, every 1GB cache size will cost 16MB guest memory. As the cache size increases, the memory footprint for page descriptors also increases, which may offset the benefit of dax by eliminating guest page cache.
In summary, per-file dax feature tries to achieve a balance between performance and memory overhead, by offering a finer gained control for dax to users.
Quoted 3 lines
that selecting which files to turn DAX on, will itself will not be a trivial. Not sure what heuristics are being deployed to determine that. Will like to know more about it.
Currently we enable dax for hot and large blob files, while disabling dax for other miscellaneous small files.
Signature · 2 lines
Thanks, Jeffle
Thanks for the replying and suggesting. ;)
Quoted 49 lines · Vivek Goyal
Quoted 39 lines · JeffleXu
Hi, I add some performance statistics below.
Quoted 9 lines · Vivek Goyal
Quoted 8 lines · Dr. David Alan Gilbert
Quoted 7 lines · * Miklos Szeredi ([email protected]) wrote:
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Where we're contending on virtiofs dax cache size it makes a lot of sense; it's quite expensive for us to map something into the cache (especially if we push something else out), so selectively DAXing files that are expected to be hot could help reduce cache churn.
Yes, the performance of dax can be limited when the DAX window is limited, where dax window may be contended by multiple files.
I tested kernel compiling in virtiofs, emulating the scenario where a lot of files contending dax window and triggering dax window reclaiming.
Environment setup:
- guest vCPU: 16
- time make vmlinux -j128type | cache | cache-size | time ------- | ------ | ---------- | ---- non-dax | always | -- | real 2m48.119s dax | always | 64M | real 4m49.563s dax | always | 1G | real 3m14.200s dax | always | 4G | real 2m41.141sQuoted 8 lines
It can be seen that there's performance drop, comparing to the normal buffered IO, when dax window resource is restricted and dax window relcaiming is triggered. The smaller the cache size is, the worse the performance is. The performance drop can be alleviated and eliminated as cache size increases.
Though we may not compile kernel in virtiofs, indeed we may access a lot of small files in virtiofs and suffer this performance drop.
Quoted 7 lines
Hi Jeffle,
If you access lot of big files or a file bigger than dax window, still you will face performance drop due to reclaim. IOW, if data being accessed is bigger than dax window, then reclaim will trigger and performance drop will be observed. So I think its not fair to assciate performance drop with big for small files as such.
Yes, it is. Actually what I mean is that small files (with size smaller than dax window chunk size) is more likely to consume more dax windows compared to large files, under the same total file size.
Quoted 7 lines
What makes more sense is that memomry usage argument you have used later in the email. That is, we have a fixed chunk size of 2MB. And that means we use 512 * 64 = 32K of memory per chunk. So if a file is smaller than 32K in size, it might be better to just access it without DAX and incur the cost of page cache in guest instead. Even this argument also works only if dax window is being utilized fully.
Yes, agreed. In this case, the meaning of per-file dax is that, admin could control the size of overall dax window under a limited number, while still sustaining a reasonable performance. But at least, users are capable of tuning it now.
Quoted 5 lines
Anyway, I think Miklos already asked you to send patches so that virtiofs daemon specifies which file to use dax on. So are you planning to post patches again for that. (And drop patches to read dax attr from per inode from filesystem in guest).
OK. I will send a new version, disabling dax based on the file size on the host daemon side. Besides, I'm afraid the negotiation phase is also not needed anymore, since currently the hint whether dax shall be enabled or not is completely feeded from host daemon, and the guest side needn't set/clear per inode dax attr now.
Signature · 2 lines
Thanks, Jeffle
Vivek Goyal
maintainerQuoted 9 lines · Miklos Szeredi
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Initially I thought that they needed it because they are downloading files on the fly from server. So they don't want to enable dax on the file till file is completely downloaded. But later I realized that they should be able to block in FUSE_SETUPMAPPING call and make sure associated file section has been downloaded before returning and solve the problem. So that can't be the primary reason.
Other reason mentioned I think was that only certain files benefit from DAX. But not much details are there after that. It will be nice to hear a more concrete use case and more details about this usage.
Thanks
Vivek
Quoted 6 lines · Vivek Goyal
Quoted 5 lines · Miklos Szeredi
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Quoted 8 lines
Quoted 4 lines
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Initially I thought that they needed it because they are downloading files on the fly from server. So they don't want to enable dax on the file till file is completely downloaded.
Right, it's our initial requirement.
Quoted 4 lines
But later I realized that they should
be able to block inFUSE_SETUPMAPPINGcall and make sure associated file section has been downloaded before returning and solve the problem. So that can't be the primary reason.
Saying we want to access 4KB of one file inside guest, if it goes through FUSE request routine, then the fuse daemon only need to download this 4KB from remote server. But if it goes through DAX, then the fuse daemon need to download the whole DAX window (e.g., 2MB) from remote server, so called amplification. Maybe we could decrease the DAX window size, but it's a trade off.
Quoted 5 lines
Other reason mentioned I think was that only certain files benefit from DAX. But not much details are there after that. It will be nice to hear a more concrete use case and more details about this usage.
Apart from our internal requirement, more fine grained control for DAX shall be general and more flexible. Glad to hear more discussion from community.
Signature · 2 lines
Thanks, Jeffle
Miklos Szeredi
maintainerQuoted 27 lines · JeffleXu
Quoted 6 lines · Vivek Goyal
Quoted 5 lines · Miklos Szeredi
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Quoted 8 lines
Quoted 4 lines
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Initially I thought that they needed it because they are downloading files on the fly from server. So they don't want to enable dax on the file till file is completely downloaded.
Right, it's our initial requirement.
Quoted 4 lines
But later I realized that they should
be able to block inFUSE_SETUPMAPPINGcall and make sure associated file section has been downloaded before returning and solve the problem. So that can't be the primary reason.
Quoted 6 lines
Saying we want to access 4KB of one file inside guest, if it goes through FUSE request routine, then the fuse daemon only need to download this 4KB from remote server. But if it goes through DAX, then the fuse daemon need to download the whole DAX window (e.g., 2MB) from remote server, so called amplification. Maybe we could decrease the DAX window size, but it's a trade off.
That could be achieved with a plain fuse filesystem on the host (which will get 4k READ requests for accesses to mapped area inside guest). Since this can be done selectively for files which are not yet downloaded, the extra layer wouldn't be a performance problem.
Is there a reason why that wouldn't work?
Thanks,
Miklos
Quoted 35 lines · Miklos Szeredi
Quoted 27 lines · JeffleXu
Quoted 6 lines · Vivek Goyal
Quoted 5 lines · Miklos Szeredi
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Quoted 8 lines
Quoted 4 lines
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Initially I thought that they needed it because they are downloading files on the fly from server. So they don't want to enable dax on the file till file is completely downloaded.
Right, it's our initial requirement.
Quoted 4 lines
But later I realized that they should
be able to block inFUSE_SETUPMAPPINGcall and make sure associated file section has been downloaded before returning and solve the problem. So that can't be the primary reason.Quoted 6 lines
Saying we want to access 4KB of one file inside guest, if it goes through FUSE request routine, then the fuse daemon only need to download this 4KB from remote server. But if it goes through DAX, then the fuse daemon need to download the whole DAX window (e.g., 2MB) from remote server, so called amplification. Maybe we could decrease the DAX window size, but it's a trade off.
Quoted 4 lines
That could be achieved with a plain fuse filesystem on the host (which will get 4k READ requests for accesses to mapped area inside guest). Since this can be done selectively for files which are not yet downloaded, the extra layer wouldn't be a performance problem.
I'm not sure if I fully understand your idea. Then in this case, host daemon only prepares 4KB while guest thinks that the whole DAX window (e.g., 2MB) has been fully mapped. Then when guest really accesses the remained part (2MB - 4KB), page fault is triggered, and now host daemon is responsible for downloading the remained part?
Quoted 6 lines
Is there a reason why that wouldn't work?
Thanks,
Miklos
Signature · 2 lines
Thanks, Jeffle
Miklos Szeredi
maintainerQuoted 5 lines · JeffleXu
I'm not sure if I fully understand your idea. Then in this case, host daemon only prepares 4KB while guest thinks that the whole DAX window (e.g., 2MB) has been fully mapped. Then when guest really accesses the remained part (2MB - 4KB), page fault is triggered, and now host daemon is responsible for downloading the remained part?
Yes. Mapping an area just means setting up the page tables, it does not result in actual data transfer.
Thanks,
Miklos
Vivek Goyal
maintainerQuoted 10 lines · Miklos Szeredi
Quoted 5 lines · JeffleXu
I'm not sure if I fully understand your idea. Then in this case, host daemon only prepares 4KB while guest thinks that the whole DAX window (e.g., 2MB) has been fully mapped. Then when guest really accesses the remained part (2MB - 4KB), page fault is triggered, and now host daemon is responsible for downloading the remained part?
Yes. Mapping an area just means setting up the page tables, it does not result in actual data transfer.
But daemon will not get the page fault (its the host kernel which will handle it). And host kernel does not know that file chunk needs to be downloaded.
- Either we somehow figure out user fault handling and somehow qemu/virtiofsd get to handle the page fault then they can download file.
- Or we download the 2MB chunk at the FUSE_SETUPMAPPING time so that later kernel fault can handle it.
Am I missing something.
Vivek
Quoted 35 lines · Miklos Szeredi
Quoted 27 lines · JeffleXu
Quoted 6 lines · Vivek Goyal
Quoted 5 lines · Miklos Szeredi
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Quoted 8 lines
Quoted 4 lines
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Initially I thought that they needed it because they are downloading files on the fly from server. So they don't want to enable dax on the file till file is completely downloaded.
Right, it's our initial requirement.
Quoted 4 lines
But later I realized that they should
be able to block inFUSE_SETUPMAPPINGcall and make sure associated file section has been downloaded before returning and solve the problem. So that can't be the primary reason.Quoted 6 lines
Saying we want to access 4KB of one file inside guest, if it goes through FUSE request routine, then the fuse daemon only need to download this 4KB from remote server. But if it goes through DAX, then the fuse daemon need to download the whole DAX window (e.g., 2MB) from remote server, so called amplification. Maybe we could decrease the DAX window size, but it's a trade off.
Quoted 6 lines
That could be achieved with a plain fuse filesystem on the host (which will get 4k READ requests for accesses to mapped area inside guest). Since this can be done selectively for files which are not yet downloaded, the extra layer wouldn't be a performance problem.
Is there a reason why that wouldn't work?
I didn't realize this mechanism (working around from user space) before sending this patch set.
After learning the virtualization and KVM stuffs, I find that, as Vivek Goyal replied in [1], virtiofsd/qemu need to somehow hook the user page fault and then download the remained part.
IMHO, this mechanism (as you proposed by implementing a plain fuse filesystem on the host) seems a little bit sophisticated so far.
[1] https://lore.kernel.org/linux-fsdevel/[email protected]/
Signature · 2 lines
Thanks, Jeffle
Miklos Szeredi
maintainerQuoted 49 lines · JeffleXu
Quoted 35 lines · Miklos Szeredi
Quoted 27 lines · JeffleXu
Quoted 6 lines · Vivek Goyal
Quoted 5 lines · Miklos Szeredi
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Quoted 8 lines
Quoted 4 lines
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Initially I thought that they needed it because they are downloading files on the fly from server. So they don't want to enable dax on the file till file is completely downloaded.
Right, it's our initial requirement.
Quoted 4 lines
But later I realized that they should
be able to block inFUSE_SETUPMAPPINGcall and make sure associated file section has been downloaded before returning and solve the problem. So that can't be the primary reason.Quoted 6 lines
Saying we want to access 4KB of one file inside guest, if it goes through FUSE request routine, then the fuse daemon only need to download this 4KB from remote server. But if it goes through DAX, then the fuse daemon need to download the whole DAX window (e.g., 2MB) from remote server, so called amplification. Maybe we could decrease the DAX window size, but it's a trade off.
Quoted 6 lines
That could be achieved with a plain fuse filesystem on the host (which will get 4k READ requests for accesses to mapped area inside guest). Since this can be done selectively for files which are not yet downloaded, the extra layer wouldn't be a performance problem.
Is there a reason why that wouldn't work?
I didn't realize this mechanism (working around from user space) before sending this patch set.
Quoted 6 lines
After learning the virtualization and KVM stuffs, I find that, as Vivek Goyal replied in [1], virtiofsd/qemu need to somehow hook the user page fault and then download the remained part.
IMHO, this mechanism (as you proposed by implementing a plain fuse filesystem on the host) seems a little bit sophisticated so far.
Agree. Let's start with the simplest variant, which is the server selectively enabling dax.
Thanks,
Miklos
Vivek Goyal
maintainerQuoted 26 lines · JeffleXu
Quoted 6 lines · Vivek Goyal
Quoted 5 lines · Miklos Szeredi
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Quoted 8 lines
Quoted 4 lines
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Initially I thought that they needed it because they are downloading files on the fly from server. So they don't want to enable dax on the file till file is completely downloaded.
Right, it's our initial requirement.
Quoted 4 lines
But later I realized that they should
be able to block inFUSE_SETUPMAPPINGcall and make sure associated file section has been downloaded before returning and solve the problem. So that can't be the primary reason.
Quoted 6 lines
Saying we want to access 4KB of one file inside guest, if it goes through FUSE request routine, then the fuse daemon only need to download this 4KB from remote server. But if it goes through DAX, then the fuse daemon need to download the whole DAX window (e.g., 2MB) from remote server, so called amplification. Maybe we could decrease the DAX window size, but it's a trade off.
Downloading 2MB chunk should not be a big issue (IMHO). And if this turns out to be real concern, we could experiment with a smaller mapping granularity.
Quoted 10 lines
Quoted 6 lines
Other reason mentioned I think was that only certain files benefit from DAX. But not much details are there after that. It will be nice to hear a more concrete use case and more details about this usage.
Apart from our internal requirement, more fine grained control for DAX shall be general and more flexible. Glad to hear more discussion from community.
Sure it will be more general and flexible. But there needs to be 1-2 good concrete use cases to justify additional complexity. And I don't think that so far a good use case has come forward.
Thanks
Vivek
Quoted 27 lines · Vivek Goyal
Quoted 26 lines · JeffleXu
Quoted 6 lines · Vivek Goyal
Quoted 5 lines · Miklos Szeredi
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Quoted 8 lines
Quoted 4 lines
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Initially I thought that they needed it because they are downloading files on the fly from server. So they don't want to enable dax on the file till file is completely downloaded.
Right, it's our initial requirement.
Quoted 4 lines
But later I realized that they should
be able to block inFUSE_SETUPMAPPINGcall and make sure associated file section has been downloaded before returning and solve the problem. So that can't be the primary reason.
Quoted 8 lines
Quoted 6 lines
Saying we want to access 4KB of one file inside guest, if it goes through FUSE request routine, then the fuse daemon only need to download this 4KB from remote server. But if it goes through DAX, then the fuse daemon need to download the whole DAX window (e.g., 2MB) from remote server, so called amplification. Maybe we could decrease the DAX window size, but it's a trade off.
Downloading 2MB chunk should not be a big issue (IMHO).
Then the latency increases. Latency really matters in our use case.
Quoted 4 lines
And if this
turns out to be real concern, we could experiment with a smaller mapping granularity.
Signature · 2 lines
Thanks, Jeffle
Quoted 45 lines · Vivek Goyal
Quoted 26 lines · JeffleXu
Quoted 6 lines · Vivek Goyal
Quoted 5 lines · Miklos Szeredi
Quoted 3 lines · Jeffle Xu
This patchset adds support of per-file DAX for virtiofs, which is inspired by Ira Weiny's work on ext4[1] and xfs[2].
Quoted 8 lines
Quoted 4 lines
Can you please explain the background of this change in detail?
Why would an admin want to enable DAX for a particular virtiofs file and not for others?
Initially I thought that they needed it because they are downloading files on the fly from server. So they don't want to enable dax on the file till file is completely downloaded.
Right, it's our initial requirement.
Quoted 4 lines
But later I realized that they should
be able to block inFUSE_SETUPMAPPINGcall and make sure associated file section has been downloaded before returning and solve the problem. So that can't be the primary reason.Quoted 6 lines
Saying we want to access 4KB of one file inside guest, if it goes through FUSE request routine, then the fuse daemon only need to download this 4KB from remote server. But if it goes through DAX, then the fuse daemon need to download the whole DAX window (e.g., 2MB) from remote server, so called amplification. Maybe we could decrease the DAX window size, but it's a trade off.
Downloading 2MB chunk should not be a big issue (IMHO). And if this turns out to be real concern, we could experiment with a smaller mapping granularity.
Quoted 7 lines
Quoted 6 lines
Other reason mentioned I think was that only certain files benefit from DAX. But not much details are there after that. It will be nice to hear a more concrete use case and more details about this usage.
Quoted 8 lines
Quoted 3 lines
Apart from our internal requirement, more fine grained control for DAX shall be general and more flexible. Glad to hear more discussion from community.
Sure it will be more general and flexible. But there needs to be 1-2 good concrete use cases to justify additional complexity. And I don't think that so far a good use case has come forward.
Hi Vivek,
Our use case can be summarized like this, we need to share a readonly fs image with _multiple_ guests while keeping the memory overhead as low as possible. More specifically, we have a userspace fs and a tool[1] to split a ext4 directory into to metadata part and data part in two individual files respectively, given the fact these two files are supposed to be accessed multiple times and their sizes are ususally larger than 2MB, it indeed matches what dax's best practice hopes.
However, since these two files are sharing the same virtiofs mnt point with non-fs-image files, we'd like to have a more fine-grained control on the dax flag.
And please note that how guests would mount dax and use dax is under our control, so it's server who will decide the dax flag.
AFAICS this patch set can let either server or guest make the decision, but if most of us have concerns about the complexity brought by mixing the two cases, I think we can go with only letting server decide it by setting attr.flags.
[1]: https://github.com/dragonflyoss/image-service/blob/master/docs/nydus-design.md
Quoted 2 lines
Thanks
Vivek