Skip to contentSkip to conversation

aspeed: Add LPC mailbox support

PATCH In review Chia-Wei Wang 3 participants 7 messages Aug 17, 2021 – Mar 18, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover aspeed: Add LPC mailbox support

Add driver support for the LPC mailbox controller of ASPEED SoCs.

v2:
- Fix error handling for copy_to_user
- Fix incorrect type in the .poll initializer

Chia-Wei Wang (2):
soc: aspeed: Add LPC mailbox support
ARM: dts: aspeed: Add mailbox to device tree

 arch/arm/boot/dts/aspeed-g4.dtsi     |   7 +
 arch/arm/boot/dts/aspeed-g5.dtsi     |   8 +-
 arch/arm/boot/dts/aspeed-g6.dtsi     |   7 +
 drivers/soc/aspeed/Kconfig           |  10 +
 drivers/soc/aspeed/Makefile          |   9 +-
 drivers/soc/aspeed/aspeed-lpc-mbox.c | 418 +++++++++++++++++++++++++++
 6 files changed, 454 insertions(+), 5 deletions(-)
 create mode 100644 drivers/soc/aspeed/aspeed-lpc-mbox.c
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/2 soc: aspeed: Add LPC mailbox support

The LPC mailbox controller consists of multiple general registers for the communication between the Host and the BMC. The interrupts for data update signaling are also introduced.

---
 drivers/soc/aspeed/Kconfig           |  10 +
 drivers/soc/aspeed/Makefile          |   9 +-
 drivers/soc/aspeed/aspeed-lpc-mbox.c | 418 +++++++++++++++++++++++++++
 3 files changed, 433 insertions(+), 4 deletions(-)
 create mode 100644 drivers/soc/aspeed/aspeed-lpc-mbox.c
drivers/soc/aspeed/Kconfig +10 -0
index 243ca196e6ad..5b31a6e2620c 100644
@@ -24,6 +24,16 @@ config ASPEED_LPC_SNOOP
 	  allows the BMC to listen on and save the data written by
 	  the host to an arbitrary LPC I/O port.
 
+config ASPEED_LPC_MAILBOX
+	tristate "ASPEED LPC mailbox support"
+	select REGMAP
+	select MFD_SYSCON
+	default ARCH_ASPEED
+	help
+	  Provides a driver to control the LPC mailbox which possesses
+	  up to 32 data registers for the communication between the Host
+	  and the BMC over LPC.
+
 config ASPEED_P2A_CTRL
 	tristate "ASPEED P2A (VGA MMIO to BMC) bridge control"
 	select REGMAP
drivers/soc/aspeed/Makefile +5 -4
index fcab7192e1a4..cde6b4514c97 100644
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_ASPEED_LPC_CTRL)	+= aspeed-lpc-ctrl.o
-obj-$(CONFIG_ASPEED_LPC_SNOOP)	+= aspeed-lpc-snoop.o
-obj-$(CONFIG_ASPEED_P2A_CTRL)	+= aspeed-p2a-ctrl.o
-obj-$(CONFIG_ASPEED_SOCINFO)	+= aspeed-socinfo.o
+obj-$(CONFIG_ASPEED_LPC_CTRL)		+= aspeed-lpc-ctrl.o
+obj-$(CONFIG_ASPEED_LPC_SNOOP)		+= aspeed-lpc-snoop.o
+obj-$(CONFIG_ASPEED_LPC_MAILBOX)	+= aspeed-lpc-mbox.o
+obj-$(CONFIG_ASPEED_P2A_CTRL)		+= aspeed-p2a-ctrl.o
+obj-$(CONFIG_ASPEED_SOCINFO)		+= aspeed-socinfo.o
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +418 -0

418 lines not on this page · raw message

Signature · 1 line
2.17.1
maintainer
#2 lore raw

Re: [PATCH v2 1/2] soc: aspeed: Add LPC mailbox support

Quoted 4 lines · Chia-Wei Wang

The LPC mailbox controller consists of multiple general registers for the communication between the Host and the BMC. The interrupts for data update signaling are also introduced.

The concern with this approach is the userspace API. We don't want every driver to invent it's own way of communicating with usersapce.

I know when Cyril first submitted this driver it was suggested to use the kernel mailbox subsystem. After investigation it was decided that this hardware is not a fit; although it is a mailbox it is more like a IPMI BT or KCS device, that needs an interface to push data to and from userspace over the device.

Chai-Wei, can you link to some userspace programs that use the existing ioctl interface?

Arnd, do you have any suggestions?

Quoted 474 lines
---
 drivers/soc/aspeed/Kconfig           |  10 +
 drivers/soc/aspeed/Makefile          |   9 +-
 drivers/soc/aspeed/aspeed-lpc-mbox.c | 418 +++++++++++++++++++++++++++
 3 files changed, 433 insertions(+), 4 deletions(-)
 create mode 100644 drivers/soc/aspeed/aspeed-lpc-mbox.c
drivers/soc/aspeed/Kconfig +10 -0
index 243ca196e6ad..5b31a6e2620c 100644
@@ -24,6 +24,16 @@ config ASPEED_LPC_SNOOP
          allows the BMC to listen on and save the data written by
          the host to an arbitrary LPC I/O port.
 
+config ASPEED_LPC_MAILBOX
+       tristate "ASPEED LPC mailbox support"
+       select REGMAP
+       select MFD_SYSCON
+       default ARCH_ASPEED
+       help
+         Provides a driver to control the LPC mailbox which possesses
+         up to 32 data registers for the communication between the Host
+         and the BMC over LPC.
+
 config ASPEED_P2A_CTRL
        tristate "ASPEED P2A (VGA MMIO to BMC) bridge control"
        select REGMAP
drivers/soc/aspeed/Makefile +5 -4
index fcab7192e1a4..cde6b4514c97 100644
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_ASPEED_LPC_CTRL)  += aspeed-lpc-ctrl.o
-obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
-obj-$(CONFIG_ASPEED_P2A_CTRL)  += aspeed-p2a-ctrl.o
-obj-$(CONFIG_ASPEED_SOCINFO)   += aspeed-socinfo.o
+obj-$(CONFIG_ASPEED_LPC_CTRL)          += aspeed-lpc-ctrl.o
+obj-$(CONFIG_ASPEED_LPC_SNOOP)         += aspeed-lpc-snoop.o
+obj-$(CONFIG_ASPEED_LPC_MAILBOX)       += aspeed-lpc-mbox.o
+obj-$(CONFIG_ASPEED_P2A_CTRL)          += aspeed-p2a-ctrl.o
+obj-$(CONFIG_ASPEED_SOCINFO)           += aspeed-socinfo.o
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +418 -1
new file mode 100644
index 000000000000..a09ca6a175f7
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 IBM Corporation
+ * Copyright 2021 Aspeed Technology Inc.
+ */
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define DEVICE_NAME    "aspeed-mbox"
+
+#define ASPEED_MBOX_DR(dr, n)  (dr + (n * 4))
+#define ASPEED_MBOX_STR(str, n)        (str + (n / 8) * 4)
+#define ASPEED_MBOX_BIE(bie, n)        (bie + (n / 8) * 4)
+#define ASPEED_MBOX_HIE(hie, n) (hie + (n / 8) * 4)
+
+#define ASPEED_MBOX_BCR_RECV   BIT(7)
+#define ASPEED_MBOX_BCR_MASK   BIT(1)
+#define ASPEED_MBOX_BCR_SEND   BIT(0)
+
+/* ioctl code */
+#define ASPEED_MBOX_IOCTL              0xA3
+#define ASPEED_MBOX_IOCTL_GET_SIZE     \
+       _IOR(ASPEED_MBOX_IOCTL, 0, struct aspeed_mbox_ioctl_data)
+
+struct aspeed_mbox_ioctl_data {
+       unsigned int data;
+};
+
+struct aspeed_mbox_model {
+       unsigned int dr_num;
+
+       /* offsets to the MBOX registers */
+       unsigned int dr;
+       unsigned int str;
+       unsigned int bcr;
+       unsigned int hcr;
+       unsigned int bie;
+       unsigned int hie;
+};
+
+struct aspeed_mbox {
+       struct miscdevice miscdev;
+       struct regmap *map;
+       unsigned int base;
+       wait_queue_head_t queue;
+       struct mutex mutex;
+       const struct aspeed_mbox_model *model;
+};
+
+static atomic_t aspeed_mbox_open_count = ATOMIC_INIT(0);
+
+static u8 aspeed_mbox_inb(struct aspeed_mbox *mbox, int reg)
+{
+       /*
+        * The mbox registers are actually only one byte but are addressed
+        * four bytes apart. The other three bytes are marked 'reserved',
+        * they *should* be zero but lets not rely on it.
+        * I am going to rely on the fact we can casually read/write to them...
+        */
+       unsigned int val = 0xff; /* If regmap throws an error return 0xff */
+       int rc = regmap_read(mbox->map, mbox->base + reg, &val);
+
+       if (rc)
+               dev_err(mbox->miscdev.parent, "regmap_read() failed with "
+                       "%d (reg: 0x%08x)\n", rc, reg);
+
+       return val & 0xff;
+}
+
+static void aspeed_mbox_outb(struct aspeed_mbox *mbox, u8 data, int reg)
+{
+       int rc = regmap_write(mbox->map, mbox->base + reg, data);
+
+       if (rc)
+               dev_err(mbox->miscdev.parent, "regmap_write() failed with "
+                       "%d (data: %u reg: 0x%08x)\n", rc, data, reg);
+}
+
+static struct aspeed_mbox *file_mbox(struct file *file)
+{
+       return container_of(file->private_data, struct aspeed_mbox, miscdev);
+}
+
+static int aspeed_mbox_open(struct inode *inode, struct file *file)
+{
+       struct aspeed_mbox *mbox = file_mbox(file);
+       const struct aspeed_mbox_model *model = mbox->model;
+
+       if (atomic_inc_return(&aspeed_mbox_open_count) == 1) {
+               /*
+                * Clear the interrupt status bit if it was left on and unmask
+                * interrupts.
+                * ASPEED_MBOX_BCR_RECV bit is W1C, this also unmasks in 1 step
+                */
+               aspeed_mbox_outb(mbox, ASPEED_MBOX_BCR_RECV, model->bcr);
+               return 0;
+       }
+
+       atomic_dec(&aspeed_mbox_open_count);
+       return -EBUSY;
+}
+
+static ssize_t aspeed_mbox_read(struct file *file, char __user *buf,
+                               size_t count, loff_t *ppos)
+{
+       struct aspeed_mbox *mbox = file_mbox(file);
+       const struct aspeed_mbox_model *model = mbox->model;
+       char __user *p = buf;
+       ssize_t ret;
+       int i;
+
+       if (!access_ok(buf, count))
+               return -EFAULT;
+
+       if (count + *ppos > model->dr_num)
+               return -EINVAL;
+
+       if (file->f_flags & O_NONBLOCK) {
+               if (!(aspeed_mbox_inb(mbox, model->bcr) &
+                               ASPEED_MBOX_BCR_RECV))
+                       return -EAGAIN;
+       } else if (wait_event_interruptible(mbox->queue,
+                               aspeed_mbox_inb(mbox, model->bcr) &
+                               ASPEED_MBOX_BCR_RECV)) {
+               return -ERESTARTSYS;
+       }
+
+       mutex_lock(&mbox->mutex);
+
+       for (i = *ppos; count > 0 && i < model->dr_num; i++) {
+               uint8_t reg = aspeed_mbox_inb(mbox, ASPEED_MBOX_DR(model->dr, i));
+
+               ret = __put_user(reg, p);
+               if (ret)
+                       goto out_unlock;
+
+               p++;
+               count--;
+       }
+
+       /* ASPEED_MBOX_BCR_RECV bit is write to clear, this also unmasks in 1 step */
+       aspeed_mbox_outb(mbox, ASPEED_MBOX_BCR_RECV, model->bcr);
+       ret = p - buf;
+
+out_unlock:
+       mutex_unlock(&mbox->mutex);
+       return ret;
+}
+
+static ssize_t aspeed_mbox_write(struct file *file, const char __user *buf,
+                               size_t count, loff_t *ppos)
+{
+       struct aspeed_mbox *mbox = file_mbox(file);
+       const struct aspeed_mbox_model *model = mbox->model;
+       const char __user *p = buf;
+       ssize_t ret;
+       char c;
+       int i;
+
+       if (!access_ok(buf, count))
+               return -EFAULT;
+
+       if (count + *ppos > model->dr_num)
+               return -EINVAL;
+
+       mutex_lock(&mbox->mutex);
+
+       for (i = *ppos; count > 0 && i < model->dr_num; i++) {
+               ret = __get_user(c, p);
+               if (ret)
+                       goto out_unlock;
+
+               aspeed_mbox_outb(mbox, c, ASPEED_MBOX_DR(model->dr, i));
+               p++;
+               count--;
+       }
+
+       aspeed_mbox_outb(mbox, ASPEED_MBOX_BCR_SEND, model->bcr);
+       ret = p - buf;
+
+out_unlock:
+       mutex_unlock(&mbox->mutex);
+       return ret;
+}
+
+static __poll_t aspeed_mbox_poll(struct file *file, poll_table *wait)
+{
+       struct aspeed_mbox *mbox = file_mbox(file);
+       const struct aspeed_mbox_model *model = mbox->model;
+       __poll_t mask = 0;
+
+       poll_wait(file, &mbox->queue, wait);
+
+       if (aspeed_mbox_inb(mbox, model->bcr) & ASPEED_MBOX_BCR_RECV)
+               mask |= POLLIN;
+
+       return mask;
+}
+
+static int aspeed_mbox_release(struct inode *inode, struct file *file)
+{
+       atomic_dec(&aspeed_mbox_open_count);
+       return 0;
+}
+
+static long aspeed_mbox_ioctl(struct file *file, unsigned int cmd,
+                                unsigned long param)
+{
+       long ret = 0;
+       struct aspeed_mbox *mbox = file_mbox(file);
+       const struct aspeed_mbox_model *model = mbox->model;
+       struct aspeed_mbox_ioctl_data data;
+
+       switch (cmd) {
+       case ASPEED_MBOX_IOCTL_GET_SIZE:
+               data.data = model->dr_num;
+               if (copy_to_user((void __user *)param, &data, sizeof(data)))
+                       ret = -EFAULT;
+               break;
+       default:
+               ret = -ENOTTY;
+               break;
+       }
+
+       return ret;
+}
+
+static const struct file_operations aspeed_mbox_fops = {
+       .owner          = THIS_MODULE,
+       .llseek         = no_seek_end_llseek,
+       .read           = aspeed_mbox_read,
+       .write          = aspeed_mbox_write,
+       .open           = aspeed_mbox_open,
+       .release        = aspeed_mbox_release,
+       .poll           = aspeed_mbox_poll,
+       .unlocked_ioctl = aspeed_mbox_ioctl,
+};
+
+static irqreturn_t aspeed_mbox_irq(int irq, void *arg)
+{
+       struct aspeed_mbox *mbox = arg;
+       const struct aspeed_mbox_model *model = mbox->model;
+
+       if (!(aspeed_mbox_inb(mbox, model->bcr) & ASPEED_MBOX_BCR_RECV))
+               return IRQ_NONE;
+
+       /*
+        * Leave the status bit set so that we know the data is for us,
+        * clear it once it has been read.
+        */
+
+       /* Mask it off, we'll clear it when we the data gets read */
+       aspeed_mbox_outb(mbox, ASPEED_MBOX_BCR_MASK, model->bcr);
+
+       wake_up(&mbox->queue);
+       return IRQ_HANDLED;
+}
+
+static int aspeed_mbox_config_irq(struct aspeed_mbox *mbox,
+               struct platform_device *pdev)
+{
+       const struct aspeed_mbox_model *model = mbox->model;
+       struct device *dev = &pdev->dev;
+       int i, rc, irq;
+
+       irq = irq_of_parse_and_map(dev->of_node, 0);
+       if (!irq)
+               return -ENODEV;
+
+       rc = devm_request_irq(dev, irq, aspeed_mbox_irq,
+                       IRQF_SHARED, DEVICE_NAME, mbox);
+       if (rc < 0) {
+               dev_err(dev, "Unable to request IRQ %d\n", irq);
+               return rc;
+       }
+
+       /*
+        * Disable all register based interrupts.
+        */
+       for (i = 0; i < model->dr_num / 8; ++i)
+               aspeed_mbox_outb(mbox, 0x00, ASPEED_MBOX_BIE(model->bie, i));
+
+       /* These registers are write one to clear. Clear them. */
+       for (i = 0; i < model->dr_num / 8; ++i)
+               aspeed_mbox_outb(mbox, 0xff, ASPEED_MBOX_STR(model->str, i));
+
+       aspeed_mbox_outb(mbox, ASPEED_MBOX_BCR_RECV, model->bcr);
+       return 0;
+}
+
+static int aspeed_mbox_probe(struct platform_device *pdev)
+{
+       struct aspeed_mbox *mbox;
+       struct device *dev;
+       int rc;
+
+       dev = &pdev->dev;
+
+       mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
+       if (!mbox)
+               return -ENOMEM;
+
+       dev_set_drvdata(&pdev->dev, mbox);
+
+       rc = of_property_read_u32(dev->of_node, "reg", &mbox->base);
+       if (rc) {
+               dev_err(dev, "Couldn't read reg device tree property\n");
+               return rc;
+       }
+
+       mbox->model = of_device_get_match_data(dev);
+       if (IS_ERR(mbox->model)) {
+               dev_err(dev, "Couldn't get model data\n");
+               return -ENODEV;
+       }
+
+       mbox->map = syscon_node_to_regmap(
+                       pdev->dev.parent->of_node);
+       if (IS_ERR(mbox->map)) {
+               dev_err(dev, "Couldn't get regmap\n");
+               return -ENODEV;
+       }
+
+       mutex_init(&mbox->mutex);
+       init_waitqueue_head(&mbox->queue);
+
+       mbox->miscdev.minor = MISC_DYNAMIC_MINOR;
+       mbox->miscdev.name = DEVICE_NAME;
+       mbox->miscdev.fops = &aspeed_mbox_fops;
+       mbox->miscdev.parent = dev;
+       rc = misc_register(&mbox->miscdev);
+       if (rc) {
+               dev_err(dev, "Unable to register device\n");
+               return rc;
+       }
+
+       rc = aspeed_mbox_config_irq(mbox, pdev);
+       if (rc) {
+               dev_err(dev, "Failed to configure IRQ\n");
+               misc_deregister(&mbox->miscdev);
+               return rc;
+       }
+
+       return 0;
+}
+
+static int aspeed_mbox_remove(struct platform_device *pdev)
+{
+       struct aspeed_mbox *mbox = dev_get_drvdata(&pdev->dev);
+
+       misc_deregister(&mbox->miscdev);
+
+       return 0;
+}
+
+static const struct aspeed_mbox_model ast2400_model = {
+       .dr_num = 16,
+       .dr     = 0x0,
+       .str = 0x40,
+       .bcr = 0x48,
+       .hcr = 0x4c,
+       .bie = 0x50,
+       .hie = 0x58,
+};
+
+static const struct aspeed_mbox_model ast2500_model = {
+       .dr_num = 16,
+       .dr     = 0x0,
+       .str = 0x40,
+       .bcr = 0x48,
+       .hcr = 0x4c,
+       .bie = 0x50,
+       .hie = 0x58,
+};
+
+static const struct aspeed_mbox_model ast2600_model = {
+       .dr_num = 32,
+       .dr     = 0x0,
+       .str = 0x80,
+       .bcr = 0x90,
+       .hcr = 0x94,
+       .bie = 0xa0,
+       .hie = 0xb0,
+};
+
+static const struct of_device_id aspeed_mbox_match[] = {
+       { .compatible = "aspeed,ast2400-mbox",
+         .data = &ast2400_model },
+       { .compatible = "aspeed,ast2500-mbox",
+         .data = &ast2500_model },
+       { .compatible = "aspeed,ast2600-mbox",
+         .data = &ast2600_model },
+       { },
+};
+
+static struct platform_driver aspeed_mbox_driver = {
+       .driver = {
+               .name           = DEVICE_NAME,
+               .of_match_table = aspeed_mbox_match,
+       },
+       .probe = aspeed_mbox_probe,
+       .remove = aspeed_mbox_remove,
+};
+
+module_platform_driver(aspeed_mbox_driver);
+MODULE_DEVICE_TABLE(of, aspeed_mbox_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cyril Bur <[email protected]>");
+MODULE_AUTHOR("Chia-Wei Wang <[email protected]");
+MODULE_DESCRIPTION("Aspeed mailbox device driver");
--

2.17.1

#3 lore raw

RE: [PATCH v2 1/2] soc: aspeed: Add LPC mailbox support

Hi Joel,

Quoted 10 lines

From: Joel Stanley <[email protected]>
Sent: Friday, March 18, 2022 3:06 PM

Quoted 4 lines · Chia-Wei Wang

The LPC mailbox controller consists of multiple general registers for the communication between the Host and the BMC.
The interrupts for data update signaling are also introduced.

Quoted 8 lines

The concern with this approach is the userspace API. We don't want every driver to invent it's own way of communicating with usersapce.

I know when Cyril first submitted this driver it was suggested to use the kernel mailbox subsystem. After investigation it was decided that this hardware is not a fit; although it is a mailbox it is more like a IPMI BT or KCS device, that needs an interface to push data to and from userspace over the device.

Thanks for the explanation.

The current implementation exports the mailbox register access in the file (device node) read/write way. The read/write behavior is slightly different than a usual text file though...

The IOCTL is used only to retrieve the number of mailbox registers available. We can consider exporting this through sysfs as a driver property, perhaps?

Is the IOCTL part the major concern? Or the file-based read/write also needs to be re-considered?

Quoted 2 lines

Chai-Wei, can you link to some userspace programs that use the existing ioctl interface?

The kcs_bt_test APP in Aspeed GitHub has the example to access LPC mailbox with read()/write() toward its device node. However, as kcs_bt_test is for internal test only, it is now removed in the latest release.

You can still find the source in the early release tags (e.g. v00.01.00).
https://github.com/AspeedTech-BMC/aspeed_app/blob/v00.01.00/kcs_bt_test/kcs_bt_test.c#L157

Thanks,
Chiawei

Quoted 486 lines

Arnd, do you have any suggestions?

Quoted 109 lines
---
 drivers/soc/aspeed/Kconfig           |  10 +
 drivers/soc/aspeed/Makefile          |   9 +-
 drivers/soc/aspeed/aspeed-lpc-mbox.c | 418
+++++++++++++++++++++++++++
 3 files changed, 433 insertions(+), 4 deletions(-)  create mode

100644 drivers/soc/aspeed/aspeed-lpc-mbox.c

drivers/soc/aspeed/Kconfig +10 -0
index 243ca196e6ad..5b31a6e2620c 100644
@@ -24,6 +24,16 @@ config ASPEED_LPC_SNOOP
          allows the BMC to listen on and save the data written by
          the host to an arbitrary LPC I/O port.
 
+config ASPEED_LPC_MAILBOX
+       tristate "ASPEED LPC mailbox support"
+       select REGMAP
+       select MFD_SYSCON
+       default ARCH_ASPEED
+       help
+         Provides a driver to control the LPC mailbox which possesses
+         up to 32 data registers for the communication between the Host
+         and the BMC over LPC.
+
 config ASPEED_P2A_CTRL
        tristate "ASPEED P2A (VGA MMIO to BMC) bridge control"
        select REGMAP
drivers/soc/aspeed/Makefile +5 -4
index fcab7192e1a4..cde6b4514c97 100644
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_ASPEED_LPC_CTRL)  += aspeed-lpc-ctrl.o
-obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
-obj-$(CONFIG_ASPEED_P2A_CTRL)  += aspeed-p2a-ctrl.o
-obj-$(CONFIG_ASPEED_SOCINFO)   += aspeed-socinfo.o
+obj-$(CONFIG_ASPEED_LPC_CTRL)          += aspeed-lpc-ctrl.o
+obj-$(CONFIG_ASPEED_LPC_SNOOP)         += aspeed-lpc-snoop.o
+obj-$(CONFIG_ASPEED_LPC_MAILBOX)       += aspeed-lpc-mbox.o
+obj-$(CONFIG_ASPEED_P2A_CTRL)          += aspeed-p2a-ctrl.o
+obj-$(CONFIG_ASPEED_SOCINFO)           += aspeed-socinfo.o
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +54 -0
new file mode 100644
index 000000000000..a09ca6a175f7
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 IBM Corporation
+ * Copyright 2021 Aspeed Technology Inc.
+ */
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define DEVICE_NAME    "aspeed-mbox"
+
+#define ASPEED_MBOX_DR(dr, n)  (dr + (n * 4))
+#define ASPEED_MBOX_STR(str, n)        (str + (n / 8) * 4)
+#define ASPEED_MBOX_BIE(bie, n)        (bie + (n / 8) * 4)
+#define ASPEED_MBOX_HIE(hie, n) (hie + (n / 8) * 4)
+
+#define ASPEED_MBOX_BCR_RECV   BIT(7)
+#define ASPEED_MBOX_BCR_MASK   BIT(1)
+#define ASPEED_MBOX_BCR_SEND   BIT(0)
+
+/* ioctl code */
+#define ASPEED_MBOX_IOCTL              0xA3
+#define ASPEED_MBOX_IOCTL_GET_SIZE     \
+       _IOR(ASPEED_MBOX_IOCTL, 0, struct aspeed_mbox_ioctl_data)
+
+struct aspeed_mbox_ioctl_data {
+       unsigned int data;
+};
+
+struct aspeed_mbox_model {
+       unsigned int dr_num;
+
+       /* offsets to the MBOX registers */
+       unsigned int dr;
+       unsigned int str;
+       unsigned int bcr;
+       unsigned int hcr;
+       unsigned int bie;
+       unsigned int hie;
+};
+
+struct aspeed_mbox {
+       struct miscdevice miscdev;
+       struct regmap *map;
+       unsigned int base;
+       wait_queue_head_t queue;
+       struct mutex mutex;

drivers/soc/aspeed/aspeed-lpc-mbox.c line 64

Quoted 10 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +10 -0
+       const struct aspeed_mbox_model *model; };
+
+static atomic_t aspeed_mbox_open_count = ATOMIC_INIT(0);
+
+static u8 aspeed_mbox_inb(struct aspeed_mbox *mbox, int reg) {
+       /*
+        * The mbox registers are actually only one byte but are addressed
+        * four bytes apart. The other three bytes are marked 'reserved',
+        * they *should* be zero but lets not rely on it.
+        * I am going to rely on the fact we can casually read/write to

them...

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 6 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +6 -0
+        */
+       unsigned int val = 0xff; /* If regmap throws an error return 0xff */
+       int rc = regmap_read(mbox->map, mbox->base + reg, &val);
+
+       if (rc)
+               dev_err(mbox->miscdev.parent, "regmap_read() failed

with "

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 11 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +11 -0
+                       "%d (reg: 0x%08x)\n", rc, reg);
+
+       return val & 0xff;
+}
+
+static void aspeed_mbox_outb(struct aspeed_mbox *mbox, u8 data, int
+reg) {
+       int rc = regmap_write(mbox->map, mbox->base + reg, data);
+
+       if (rc)
+               dev_err(mbox->miscdev.parent, "regmap_write() failed

with "

Quoted 4 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +4 -0
+                       "%d (data: %u reg: 0x%08x)\n", rc, data, reg);
+}
+
+static struct aspeed_mbox *file_mbox(struct file *file) {

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 10 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +10 -0
+       return container_of(file->private_data, struct aspeed_mbox,
+miscdev); }
+
+static int aspeed_mbox_open(struct inode *inode, struct file *file) {
+       struct aspeed_mbox *mbox = file_mbox(file);
+       const struct aspeed_mbox_model *model = mbox->model;
+
+       if (atomic_inc_return(&aspeed_mbox_open_count) == 1) {
+               /*
+                * Clear the interrupt status bit if it was left on and

unmask

drivers/soc/aspeed/aspeed-lpc-mbox.c line 97

Quoted 2 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +2 -0
+                * interrupts.
+                * ASPEED_MBOX_BCR_RECV bit is W1C, this also

unmasks in 1 step

drivers/soc/aspeed/aspeed-lpc-mbox.c line 99

Quoted 2 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +2 -0
+                */
+               aspeed_mbox_outb(mbox, ASPEED_MBOX_BCR_RECV,

model->bcr);

Quoted 17 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +17 -0
+               return 0;
+       }
+
+       atomic_dec(&aspeed_mbox_open_count);
+       return -EBUSY;
+}
+
+static ssize_t aspeed_mbox_read(struct file *file, char __user *buf,
+                               size_t count, loff_t *ppos) {
+       struct aspeed_mbox *mbox = file_mbox(file);
+       const struct aspeed_mbox_model *model = mbox->model;
+       char __user *p = buf;
+       ssize_t ret;
+       int i;
+
+       if (!access_ok(buf, count))
+               return -EFAULT;

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 10 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +10 -0
+
+       if (count + *ppos > model->dr_num)
+               return -EINVAL;
+
+       if (file->f_flags & O_NONBLOCK) {
+               if (!(aspeed_mbox_inb(mbox, model->bcr) &
+                               ASPEED_MBOX_BCR_RECV))
+                       return -EAGAIN;
+       } else if (wait_event_interruptible(mbox->queue,
+                               aspeed_mbox_inb(mbox, model->bcr)

&

Quoted 9 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +9 -0
+                               ASPEED_MBOX_BCR_RECV)) {
+               return -ERESTARTSYS;
+       }
+
+       mutex_lock(&mbox->mutex);
+
+       for (i = *ppos; count > 0 && i < model->dr_num; i++) {
+               uint8_t reg = aspeed_mbox_inb(mbox,
+ ASPEED_MBOX_DR(model->dr, i));

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 10 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +10 -0
+
+               ret = __put_user(reg, p);
+               if (ret)
+                       goto out_unlock;
+
+               p++;
+               count--;
+       }
+
+       /* ASPEED_MBOX_BCR_RECV bit is write to clear, this also

unmasks in 1 step */

drivers/soc/aspeed/aspeed-lpc-mbox.c line 146

Quoted 1 line
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +1 -0
+       aspeed_mbox_outb(mbox, ASPEED_MBOX_BCR_RECV,

model->bcr);

Quoted 20 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +20 -0
+       ret = p - buf;
+
+out_unlock:
+       mutex_unlock(&mbox->mutex);
+       return ret;
+}
+
+static ssize_t aspeed_mbox_write(struct file *file, const char __user *buf,
+                               size_t count, loff_t *ppos) {
+       struct aspeed_mbox *mbox = file_mbox(file);
+       const struct aspeed_mbox_model *model = mbox->model;
+       const char __user *p = buf;
+       ssize_t ret;
+       char c;
+       int i;
+
+       if (!access_ok(buf, count))
+               return -EFAULT;
+
+       if (count + *ppos > model->dr_num)

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 10 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +10 -0
+               return -EINVAL;
+
+       mutex_lock(&mbox->mutex);
+
+       for (i = *ppos; count > 0 && i < model->dr_num; i++) {
+               ret = __get_user(c, p);
+               if (ret)
+                       goto out_unlock;
+
+               aspeed_mbox_outb(mbox, c,

ASPEED_MBOX_DR(model->dr, i));

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 5 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +5 -0
+               p++;
+               count--;
+       }
+
+       aspeed_mbox_outb(mbox, ASPEED_MBOX_BCR_SEND,

model->bcr);

Quoted 6 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +6 -0
+       ret = p - buf;
+
+out_unlock:
+       mutex_unlock(&mbox->mutex);
+       return ret;
+}

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 10 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +10 -0
+
+static __poll_t aspeed_mbox_poll(struct file *file, poll_table *wait)
+{
+       struct aspeed_mbox *mbox = file_mbox(file);
+       const struct aspeed_mbox_model *model = mbox->model;
+       __poll_t mask = 0;
+
+       poll_wait(file, &mbox->queue, wait);
+
+       if (aspeed_mbox_inb(mbox, model->bcr) &

ASPEED_MBOX_BCR_RECV)

Quoted 12 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +12 -0
+               mask |= POLLIN;
+
+       return mask;
+}
+
+static int aspeed_mbox_release(struct inode *inode, struct file
+*file) {
+       atomic_dec(&aspeed_mbox_open_count);
+       return 0;
+}
+
+static long aspeed_mbox_ioctl(struct file *file, unsigned int cmd,

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 10 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +10 -0
+                                unsigned long param) {
+       long ret = 0;
+       struct aspeed_mbox *mbox = file_mbox(file);
+       const struct aspeed_mbox_model *model = mbox->model;
+       struct aspeed_mbox_ioctl_data data;
+
+       switch (cmd) {
+       case ASPEED_MBOX_IOCTL_GET_SIZE:
+               data.data = model->dr_num;
+               if (copy_to_user((void __user *)param, &data,

sizeof(data)))

Quoted 15 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +15 -0
+                       ret = -EFAULT;
+               break;
+       default:
+               ret = -ENOTTY;
+               break;
+       }
+
+       return ret;
+}
+
+static const struct file_operations aspeed_mbox_fops = {
+       .owner          = THIS_MODULE,
+       .llseek         = no_seek_end_llseek,
+       .read           = aspeed_mbox_read,
+       .write          = aspeed_mbox_write,

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 10 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +10 -0
+       .open           = aspeed_mbox_open,
+       .release        = aspeed_mbox_release,
+       .poll           = aspeed_mbox_poll,
+       .unlocked_ioctl = aspeed_mbox_ioctl, };
+
+static irqreturn_t aspeed_mbox_irq(int irq, void *arg) {
+       struct aspeed_mbox *mbox = arg;
+       const struct aspeed_mbox_model *model = mbox->model;
+
+       if (!(aspeed_mbox_inb(mbox, model->bcr) &

ASPEED_MBOX_BCR_RECV))

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 9 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +9 -0
+               return IRQ_NONE;
+
+       /*
+        * Leave the status bit set so that we know the data is for us,
+        * clear it once it has been read.
+        */
+
+       /* Mask it off, we'll clear it when we the data gets read */
+       aspeed_mbox_outb(mbox, ASPEED_MBOX_BCR_MASK,

model->bcr);

Quoted 25 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +25 -0
+
+       wake_up(&mbox->queue);
+       return IRQ_HANDLED;
+}
+
+static int aspeed_mbox_config_irq(struct aspeed_mbox *mbox,
+               struct platform_device *pdev) {
+       const struct aspeed_mbox_model *model = mbox->model;
+       struct device *dev = &pdev->dev;
+       int i, rc, irq;
+
+       irq = irq_of_parse_and_map(dev->of_node, 0);
+       if (!irq)
+               return -ENODEV;
+
+       rc = devm_request_irq(dev, irq, aspeed_mbox_irq,
+                       IRQF_SHARED, DEVICE_NAME, mbox);
+       if (rc < 0) {
+               dev_err(dev, "Unable to request IRQ %d\n", irq);
+               return rc;
+       }
+
+       /*
+        * Disable all register based interrupts.
+        */

drivers/soc/aspeed/aspeed-lpc-mbox.c

Quoted 10 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +10 -0
+       for (i = 0; i < model->dr_num / 8; ++i)
+               aspeed_mbox_outb(mbox, 0x00,
+ ASPEED_MBOX_BIE(model->bie, i));
+
+       /* These registers are write one to clear. Clear them. */
+       for (i = 0; i < model->dr_num / 8; ++i)
+               aspeed_mbox_outb(mbox, 0xff,
+ ASPEED_MBOX_STR(model->str, i));
+
+       aspeed_mbox_outb(mbox, ASPEED_MBOX_BCR_RECV,

model->bcr);

Quoted 107 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +107 -0
+       return 0;
+}
+
+static int aspeed_mbox_probe(struct platform_device *pdev) {
+       struct aspeed_mbox *mbox;
+       struct device *dev;
+       int rc;
+
+       dev = &pdev->dev;
+
+       mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
+       if (!mbox)
+               return -ENOMEM;
+
+       dev_set_drvdata(&pdev->dev, mbox);
+
+       rc = of_property_read_u32(dev->of_node, "reg", &mbox->base);
+       if (rc) {
+               dev_err(dev, "Couldn't read reg device tree property\n");
+               return rc;
+       }
+
+       mbox->model = of_device_get_match_data(dev);
+       if (IS_ERR(mbox->model)) {
+               dev_err(dev, "Couldn't get model data\n");
+               return -ENODEV;
+       }
+
+       mbox->map = syscon_node_to_regmap(
+                       pdev->dev.parent->of_node);
+       if (IS_ERR(mbox->map)) {
+               dev_err(dev, "Couldn't get regmap\n");
+               return -ENODEV;
+       }
+
+       mutex_init(&mbox->mutex);
+       init_waitqueue_head(&mbox->queue);
+
+       mbox->miscdev.minor = MISC_DYNAMIC_MINOR;
+       mbox->miscdev.name = DEVICE_NAME;
+       mbox->miscdev.fops = &aspeed_mbox_fops;
+       mbox->miscdev.parent = dev;
+       rc = misc_register(&mbox->miscdev);
+       if (rc) {
+               dev_err(dev, "Unable to register device\n");
+               return rc;
+       }
+
+       rc = aspeed_mbox_config_irq(mbox, pdev);
+       if (rc) {
+               dev_err(dev, "Failed to configure IRQ\n");
+               misc_deregister(&mbox->miscdev);
+               return rc;
+       }
+
+       return 0;
+}
+
+static int aspeed_mbox_remove(struct platform_device *pdev) {
+       struct aspeed_mbox *mbox = dev_get_drvdata(&pdev->dev);
+
+       misc_deregister(&mbox->miscdev);
+
+       return 0;
+}
+
+static const struct aspeed_mbox_model ast2400_model = {
+       .dr_num = 16,
+       .dr     = 0x0,
+       .str = 0x40,
+       .bcr = 0x48,
+       .hcr = 0x4c,
+       .bie = 0x50,
+       .hie = 0x58,
+};
+
+static const struct aspeed_mbox_model ast2500_model = {
+       .dr_num = 16,
+       .dr     = 0x0,
+       .str = 0x40,
+       .bcr = 0x48,
+       .hcr = 0x4c,
+       .bie = 0x50,
+       .hie = 0x58,
+};
+
+static const struct aspeed_mbox_model ast2600_model = {
+       .dr_num = 32,
+       .dr     = 0x0,
+       .str = 0x80,
+       .bcr = 0x90,
+       .hcr = 0x94,
+       .bie = 0xa0,
+       .hie = 0xb0,
+};
+
+static const struct of_device_id aspeed_mbox_match[] = {
+       { .compatible = "aspeed,ast2400-mbox",
+         .data = &ast2400_model },
+       { .compatible = "aspeed,ast2500-mbox",
+         .data = &ast2500_model },
+       { .compatible = "aspeed,ast2600-mbox",
+         .data = &ast2600_model },
+       { },
+};
+
+static struct platform_driver aspeed_mbox_driver = {

drivers/soc/aspeed/aspeed-lpc-mbox.c line 414

Quoted 10 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +10 -0
+       .driver = {
+               .name           = DEVICE_NAME,
+               .of_match_table = aspeed_mbox_match,
+       },
+       .probe = aspeed_mbox_probe,
+       .remove = aspeed_mbox_remove,
+};
+
+module_platform_driver(aspeed_mbox_driver);
+MODULE_DEVICE_TABLE(of, aspeed_mbox_match);

MODULE_LICENSE("GPL");

Quoted 6 lines
drivers/soc/aspeed/aspeed-lpc-mbox.c new file +3 -1
+MODULE_AUTHOR("Cyril Bur <[email protected]>");
+MODULE_AUTHOR("Chia-Wei Wang <[email protected]");
+MODULE_DESCRIPTION("Aspeed mailbox device driver");
--

2.17.1

#4 lore raw

PATCH v2 2/2 ARM: dts: aspeed: Add mailbox to device tree

In reply to Chia-Wei Wang

Add mailbox to the device tree for Aspeed AST24xx/AST25xx/AST26xx SoCs.

---
 arch/arm/boot/dts/aspeed-g4.dtsi | 7 +++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 8 +++++++-
 arch/arm/boot/dts/aspeed-g6.dtsi | 7 +++++++
 3 files changed, 21 insertions(+), 1 deletion(-)
arch/arm/boot/dts/aspeed-g4.dtsi +7 -0
index c5aeb3cf3a09..6298d69df415 100644
@@ -383,6 +383,13 @@
 					interrupts = <8>;
 					status = "disabled";
 				};
+
+				mbox: mbox@200 {
+					compatible = "aspeed,ast2500-mbox";
+					reg = <0x200 0x30>;
+					interrupts = <46>;
+					status = "disabled";
+				};
 			};
 
 			uart2: serial@1e78d000 {
arch/arm/boot/dts/aspeed-g5.dtsi +7 -1
index 329eaeef66fb..ab9453d7803c 100644
@@ -497,13 +497,19 @@
 					reg = <0xa0 0x24 0xc8 0x8>;
 				};
 
-
 				ibt: ibt@140 {
 					compatible = "aspeed,ast2500-ibt-bmc";
 					reg = <0x140 0x18>;
 					interrupts = <8>;
 					status = "disabled";
 				};
+
+				mbox: mbox@200 {
+					compatible = "aspeed,ast2500-mbox";
+					reg = <0x200 0x30>;
+					interrupts = <46>;
+					status = "disabled";
+				};
 			};
 
 			uart2: serial@1e78d000 {
arch/arm/boot/dts/aspeed-g6.dtsi +7 -0
index f96607b7b4e2..09b286f2ece2 100644
@@ -529,6 +529,13 @@
 					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 					status = "disabled";
 				};
+
+				mbox: mbox@200 {
+					compatible = "aspeed,ast2600-mbox";
+					reg = <0x200 0xc0>;
+					interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
 			};
 
 			sdc: sdc@1e740000 {
Signature · 1 line
2.17.1
#5 lore raw
In reply to Chia-Wei Wang

@andrew at aj.id.au @Chia-Wei Wang @joel at jms.id.au

Just want to check the latest status about this mailbox driver. I would like to get this driver upstreamed too.

Thanks,
Yong

-----Original Message-----
From: openbmc <[email protected]> On Behalf Of Chia-Wei Wang
Sent: Tuesday, August 17, 2021 10:59 AM
To: [email protected]; joel at jms.id.au; andrew at aj.id.au; cyrilbur at gmail.com; devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-aspeed at lists.ozlabs.org; linux-kernel at vger.kernel.org; openbmc at lists.ozlabs.org
Subject: [PATCH v2 0/2] aspeed: Add LPC mailbox support

Add driver support for the LPC mailbox controller of ASPEED SoCs.

v2:
- Fix error handling for copy_to_user
- Fix incorrect type in the .poll initializer

Chia-Wei Wang (2):
soc: aspeed: Add LPC mailbox support
ARM: dts: aspeed: Add mailbox to device tree

 arch/arm/boot/dts/aspeed-g4.dtsi     |   7 +
 arch/arm/boot/dts/aspeed-g5.dtsi     |   8 +-
 arch/arm/boot/dts/aspeed-g6.dtsi     |   7 +
 drivers/soc/aspeed/Kconfig           |  10 +
 drivers/soc/aspeed/Makefile          |   9 +-
 drivers/soc/aspeed/aspeed-lpc-mbox.c | 418 +++++++++++++++++++++++++++
 6 files changed, 454 insertions(+), 5 deletions(-)  create mode 100644

drivers/soc/aspeed/aspeed-lpc-mbox.c

--
2.17.1

#6 lore raw

Hi All,

Do you have any suggestion to revise this patch series? It has been verified with AST2500 and AST2600 A3 EVBs.

Thanks,
Chiawei

Quoted 45 lines

From: Yong Li <[email protected]>
Sent: Tuesday, March 1, 2022 8:34 AM

@andrew at aj.id.au @Chia-Wei Wang @joel at jms.id.au

Just want to check the latest status about this mailbox driver. I would like to get this driver upstreamed too.

Thanks,
Yong

-----Original Message-----
From: openbmc <[email protected]> On Behalf Of Chia-Wei Wang
Sent: Tuesday, August 17, 2021 10:59 AM
To: robh+dt at kernel.org; joel at jms.id.au; andrew at aj.id.au; cyrilbur at gmail.com; devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
linux-aspeed at lists.ozlabs.org; linux-kernel at vger.kernel.org; openbmc at lists.ozlabs.org
Subject: [PATCH v2 0/2] aspeed: Add LPC mailbox support

Add driver support for the LPC mailbox controller of ASPEED SoCs.

v2:
- Fix error handling for copy_to_user
- Fix incorrect type in the .poll initializer

Chia-Wei Wang (2):
soc: aspeed: Add LPC mailbox support
ARM: dts: aspeed: Add mailbox to device tree

 arch/arm/boot/dts/aspeed-g4.dtsi     |   7 +
 arch/arm/boot/dts/aspeed-g5.dtsi     |   8 +-
 arch/arm/boot/dts/aspeed-g6.dtsi     |   7 +
 drivers/soc/aspeed/Kconfig           |  10 +
 drivers/soc/aspeed/Makefile          |   9 +-
 drivers/soc/aspeed/aspeed-lpc-mbox.c | 418
+++++++++++++++++++++++++++
 6 files changed, 454 insertions(+), 5 deletions(-)  create mode 100644

drivers/soc/aspeed/aspeed-lpc-mbox.c

--
2.17.1