PCIe: limit Max Read Request Size on i.MX to 512 bytes
Subsystems (4)
PATCH v2 1/1 PCIe: limit Max Read Request Size on i.MX to 512 bytes
DWC PCIe controller imposes limits on the Read Request Size that it can handle. For i.MX6 family it's fixed at 512 bytes by default.
If a memory read larger than the limit is requested, the CPU responds with Completer Abort (CA) (on i.MX6 Unsupported Request (UR) is returned instead due to a design error).
The i.MX6 documentation states that the limit can be changed by writing to the PCIE_PL_MRCCR0 register, however there is a fixed (and undocumented) maximum (CX_REMOTE_RD_REQ_SIZE constant). Tests indicate that values larger than 512 bytes don't work, though.
This patch makes the RTL8111 work on i.MX6.
---
This version drops CONFIG_NEED_PCIE_MAX_MRRS.
drivers/pci/controller/dwc/pci-imx6.c +1 -0
@@ -1148,6 +1148,7 @@ static int imx6_pcie_probe(struct platform_device *pdev) imx6_pcie->vph =NULL ; } + max_pcie_mrrs =512 ;platform_set_drvdata (pdev, imx6_pcie); ret =imx6_pcie_attach_pd (dev);
drivers/pci/pci.c +9 -0
@@ -112,6 +112,10 @@ enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PEER2PEER;enum pcie_bus_config_types pcie_bus_config =PCIE_BUS_DEFAULT ;#endif +#ifdef CONFIG_ARM +u16 max_pcie_mrrs =4096 ;// no limit - needed mostly for DWC PCIe +#endif +/* * The default CLS is used if arch didn't set CLS explicitly and not * all pci devices agree on the same value. Arch can override either
@@ -5816,6 +5820,11 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) rq = mps; } +#ifdef CONFIG_ARM +if (rq > max_pcie_mrrs) + rq = max_pcie_mrrs; +#endif + v = (ffs (rq) -8 ) <<12 ; ret = pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
include/linux/pci.h +1 -0
@@ -996,6 +996,7 @@ enum pcie_bus_config_types { };extern enum pcie_bus_config_types pcie_bus_config; +extern u16 max_pcie_mrrs;// currently ARM only extern struct bus_type pci_bus_type;
Signature · 5 lines
Krzysztof "Chris" Hałasa Sieć Badawcza Łukasiewicz Przemysłowy Instytut Automatyki i Pomiarów PIAP Al. Jerozolimskie 202, 02-486 Warszawa
Rob Herring
reviewerQuoted 47 lines · Krzysztof Hałasa
DWC PCIe controller imposes limits on the Read Request Size that it can handle. For i.MX6 family it's fixed at 512 bytes by default.
If a memory read larger than the limit is requested, the CPU responds with Completer Abort (CA) (on i.MX6 Unsupported Request (UR) is returned instead due to a design error).
The i.MX6 documentation states that the limit can be changed by writing to the
PCIE_PL_MRCCR0register, however there is a fixed (and undocumented) maximum (CX_REMOTE_RD_REQ_SIZEconstant). Tests indicate that values larger than 512 bytes don't work, though.This patch makes the RTL8111 work on i.MX6.
Signed-off-by Krzysztof Hałasa <[email protected]>---
This version dropsCONFIG_NEED_PCIE_MAX_MRRS.drivers/pci/controller/dwc/pci-imx6.c +1
-0@@ -1148,6 +1148,7 @@ static int imx6_pcie_probe(struct platform_device *pdev) imx6_pcie->vph =NULL ; } + max_pcie_mrrs =512 ;platform_set_drvdata (pdev, imx6_pcie); ret =imx6_pcie_attach_pd (dev);drivers/pci/pci.c +4
-0@@ -112,6 +112,10 @@ enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PEER2PEER;enum pcie_bus_config_types pcie_bus_config =PCIE_BUS_DEFAULT ;#endif +#ifdef CONFIG_ARM +u16 max_pcie_mrrs =4096 ;// no limit - needed mostly for DWC PCIe +#endif +/* * The default CLS is used if arch didn't set CLS explicitly and not * all pci devices agree on the same value. Arch can override either
drivers/pci/pci.c int pcie_set_readrq(struct pci_dev *dev, int rq) · line 5826
Quoted 7 lines
drivers/pci/pci.c +4
-0@@ -5816,6 +5820,11 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) rq = mps; } +#ifdef CONFIG_ARM +if (rq > max_pcie_mrrs) + rq = max_pcie_mrrs; +#endif
My objection wasn't having another kconfig option so much as I don't think we need one at all here unless Bjorn feels otherwise. It's 2 bytes of data and about 3 instructions (load, cmp, store).
If we do have a config option, using or basing on the arch is wrong. Has nothing to do with the arch. Are the other platforms needing this arm32 as well?
Also, when you do use kconfig options, use IS_ENABLED() whenever possible.
Rob
Quoted 9 lines · Rob Herring
drivers/pci/pci.c int pcie_set_readrq(struct pci_dev *dev, int rq) · line 5826
Quoted 4 lines
drivers/pci/pci.c +4
-0+#ifdef CONFIG_ARM +if (rq > max_pcie_mrrs) + rq = max_pcie_mrrs; +#endif My objection wasn't having another kconfig option so much as I don't think we need one at all here unless Bjorn feels otherwise. It's 2 bytes of data and about 3 instructions (load, cmp, store).
Quoted 3 lines
If we do have a config option, using or basing on the arch is wrong. Has nothing to do with the arch. Are the other platforms needing this arm32 as well?
Yes,
I can buy the "universal ARM32 kernel" argument, but otherwise it's just nonfunctional bloat. A small one, yes.
Signature · 5 lines
Krzysztof "Chris" Hałasa Sieć Badawcza Łukasiewicz Przemysłowy Instytut Automatyki i Pomiarów PIAP Al. Jerozolimskie 202, 02-486 Warszawa
kernel test robot
build botThank you for the patch! Yet something to improve:
Hi "Krzysztof,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on pci/next]
[also build test ERROR on v5.14-rc6 next-20210816]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Krzysztof-Ha-asa/PCIe-limit-Max-Read-Request-Size-on-i-MX-to-512-bytes/20210816-193000 base: https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next config: parisc-allyesconfig (attached as .config) compiler: hppa-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/63e17da24ae7c5ee07f3a34fc32cff6455e5b0c5
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Krzysztof-Ha-asa/PCIe-limit-Max-Read-Request-Size-on-i-MX-to-512-bytes/20210816-193000 git checkout 63e17da24ae7c5ee07f3a34fc32cff6455e5b0c5
# save the attached .config to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=parisc SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
hppa-linux-ld: drivers/pci/controller/dwc/pci-imx6.o: in function `imx6_pcie_probe':
>> (.text+0x698): undefined reference to `max_pcie_mrrs' >> hppa-linux-ld: (.text+0x6a4): undefined reference to `max_pcie_mrrs'
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
kernel test robot
build botThank you for the patch! Yet something to improve:
Hi "Krzysztof,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on pci/next]
[also build test ERROR on v5.14-rc6 next-20210816]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Krzysztof-Ha-asa/PCIe-limit-Max-Read-Request-Size-on-i-MX-to-512-bytes/20210816-193000 base: https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next config: arm64-randconfig-p001-20210816 (attached as .config) compiler: aarch64-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/63e17da24ae7c5ee07f3a34fc32cff6455e5b0c5
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Krzysztof-Ha-asa/PCIe-limit-Max-Read-Request-Size-on-i-MX-to-512-bytes/20210816-193000 git checkout 63e17da24ae7c5ee07f3a34fc32cff6455e5b0c5
# save the attached .config to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arm64 SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
aarch64-linux-ld: drivers/pci/controller/dwc/pci-imx6.o: in function `imx6_pcie_probe':
pci-imx6.c:(.text+0x7c8): undefined reference to `max_pcie_mrrs'
aarch64-linux-ld: drivers/pci/controller/dwc/pci-imx6.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `max_pcie_mrrs' which may bind externally can not be used when making a shared object; recompile with -fPIC pci-imx6.c:(.text+0x7c8): dangerous relocation: unsupported relocation
>> aarch64-linux-ld: pci-imx6.c:(.text+0x7d4): undefined reference to `max_pcie_mrrs'
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org