Skip to contentSkip to conversation

serial: 8250_mid: Use pci_irq_vector() to get IRQ

PATCH In review Utkarsh Verma 3 participants 3 messages Aug 17, 2021 – Aug 26, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 serial: 8250_mid: Use pci_irq_vector() to get IRQ

Instead of a direct assignment, use pci_irq_vector() to get the Linux IRQ number.

---
 drivers/tty/serial/8250/8250_mid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/8250/8250_mid.c +1 -1
index efa0515139f8..3a279ce0e904 100644
@@ -299,7 +299,7 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	memset(&uart, 0, sizeof(struct uart_8250_port));
 
 	uart.port.dev = &pdev->dev;
-	uart.port.irq = pdev->irq;
+	uart.port.irq = pci_irq_vector(pdev, 0);
 	uart.port.private_data = mid;
 	uart.port.type = PORT_16750;
 	uart.port.iotype = UPIO_MEM;
Signature · 1 line
2.17.1
#1 lore raw
Quoted 2 lines · Utkarsh Verma

Instead of a direct assignment, use pci_irq_vector() to get the Linux IRQ number.

Why is this needed?

Quoted 10 lines
---
 drivers/tty/serial/8250/8250_mid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/8250/8250_mid.c +0 -0
index efa0515139f8..3a279ce0e904 100644

drivers/tty/serial/8250/8250_mid.c static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) · line 302

Quoted 5 lines
drivers/tty/serial/8250/8250_mid.c +1 -1
@@ -299,7 +299,7 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	memset(&uart, 0, sizeof(struct uart_8250_port));
 
 	uart.port.dev = &pdev->dev;
-	uart.port.irq = pdev->irq;
+	uart.port.irq = pci_irq_vector(pdev, 0);

What problem does this solve?

Do not describe what you are doing, but rather, _why_ you are doing it.

thanks,

greg k-h

#2 lore raw
Quoted 5 lines · Greg Kroah-Hartman
Quoted 2 lines · Utkarsh Verma

Instead of a direct assignment, use pci_irq_vector() to get the Linux IRQ number.

Why is this needed?

It's not.

Quoted 5 lines
Quoted 1 line

+ uart.port.irq = pci_irq_vector(pdev, 0);

What problem does this solve?

Do not describe what you are doing, but rather, _why_ you are doing it.

I think I know what was the motivation here, but actually there is no problem with current code. Indeed, when we enable MSI we have to update the vIRQ line, but this is done in the platform related ->setup() callbacks (for example, dnv_setup() does it). So we have two scenarios:
1) there is no MSI enabled and in this case pdev->irq is correct;
2) we have MSI enabled and we need to update previously saved pdev->irq.

What you, Utkarsh, are doing in the patch has no effect, because at that point MSI will never be enabled and pci_irq_vector(pdev, 0) will return the very same value as kept in pdev->irq.

Signature · 2 lines
With Best Regards,
Andy Shevchenko